Samplers perform the actual work of JMeter. Each sampler (except Test Action) generates one or more sample results. The sample results have various attributes (success/fail, elapsed time, data size etc) and can be viewed in the various listeners.

18.1.1 FTP Request

This controller lets you send an FTP "retrieve file" or "upload file" request to an FTP server. If you are going to send multiple requests to the same FTP server, consider using a FTP Request Defaults Configuration Element so you do not have to enter the same information for each FTP Request Generative Controller. When downloading a file, it can be stored on disk (Local File) or in the Response Data, or both. Control Panel Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree. No Server Name or IP Domain name or IP address of the FTP server. JMeter assumes the FTP server is listening on the default port. Yes Remote File: File to retrieve or upload. Yes Local File: File to upload, or destination for downloads. Yes, if uploading get(RETR) / put(STOR) Whether to retrieve or upload a file. Yes Use Binary mode ? Check this to use Binary mode (default Ascii) Yes Save File in Response ? Whether to store contents of retrieved file in response data. If the mode is Ascii, then the contents will be visible in the Tree View Listener. Yes, if downloading Username FTP account username. Usually Password FTP account password. N.B. This will be visible in the test plan. Usually See Also: Assertions FTP Request Defaults Building an FTP Test Plan

---

18.1.2 HTTP Request

This sampler lets you send an HTTP/HTTPS request to a web server. It also lets you control whether or not JMeter parses HTML files for images and other embedded resources and sends HTTP requests to retrieve them. The following types of embedded resource are retrieved: images applets stylesheets external scripts frames background images (body, table, TD, TR) background sound The default parser is htmlparser. This can be changed by using the property "htmlparser.classname" - see jmeter.properties for details. If you are going to send multiple requests to the same web server, consider using an HTTP Request Defaults Configuration Element so you do not have to enter the same information for each HTTP Request. Or, instead of manually adding HTTP Requests, you may want to use JMeter's HTTP Proxy Server to create them. This can save you time if you have a lot of HTTP requests or requests with many parameters. There are two versions of the sampler - one uses the default Java HTTP implementation, the other uses Commons HttpClient. The default (Java) implementation has some limitations: There is no control over how connections are re-used. When a connection is released by JMeter, it may or may not be re-used by the same thread. The API is best suited to single-threaded usage - various settings (e.g. proxy) are defined via system properties, and therefore apply to all connections. There is a bug in the handling of HTTPS via a Proxy (the CONNECT is not handled correctly). See Java bugs 6226610 and 6208335. Note: the FILE protocol is intended for testing puposes only. It is handled by the same code regardless of which HTTP Sampler is used. If the request requires server or proxy login authorization (i.e. where a browser would create a pop-up dialog box), you will also have to add an HTTP Authorization Manager Configuration Element. For normal logins (i.e. where the user enters login information in a form), you will need to work out what the form submit button does, and create an HTTP request with the appropriate method (usually POST) and the appropriate parameters from the form definition. If the page uses HTTP, you can use the JMeter Proxy to capture the login sequence. In versions of JMeter up to 2.2, only a single SSL context was used for all threads and samplers. This did not generate the proper load for multiple users. A separate SSL context is now used for each thread. To revert to the original behaviour, set the JMeter property: https.sessioncontext.shared=true JMeter defaults to the SSL protocol level TLS. If the server needs a different level, e.g. SSLv3, change the JMeter property, for example: https.default.protocol=SSLv3 If the request uses cookies, then you will also need an HTTP Cookie Manager . You can add either of these elements to the Thread Group or the HTTP Request. If you have more than one HTTP Request that needs authorizations or cookies, then add the elements to the Thread Group. That way, all HTTP Request controllers will share the same Authorization Manager and Cookie Manager elements. If the request uses a technique called "URL Rewriting" to maintain sessions, then see section 6.1 Handling User Sessions With URL Rewriting for additional configuration steps. Control Panel Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree. No Server Domain name or IP address of the web server. No Port Port the web server is listening to. Default: 80 No Protocol HTTP, HTTPS or FILE. Default: HTTP No Method GET, POST, HEAD, TRACE, OPTIONS, PUT, DELETE Yes Content Encoding Content encoding to be used (for POST and FILE) No Redirect Automatically Sets the underlying http protocol handler to automatically follow redirects, so they are not seen by JMeter, and thus will not appear as samples. In versions after 2.2, this is now the default. Warning: see below for information on cookie handling. Yes Follow Redirects This only has any effect if "Redirect Automatically" is not enabled. If set, the JMeter sampler will check if the response is a redirect and follow it if so. The redirect response will appear as an additional sample. Note that the HttpClient sampler may log the following message: "Redirect requested but followRedirects is disabled" This can be ignored. Yes Use KeepAlive JMeter sets the Connection: keep-alive header. This does not work properly with the default HTTP implementation, as connection re-use is not under user-control. It does work with the Jakarta httpClient implementation. Yes Use multipart/form-data for HTTP POST Use a multipart/form-data or application/x-www-form-urlencoded post request Yes Path The path to resource (for example, /servlets/myServlet). If the resource requires query string parameters, add them below in the "Send Parameters With the Request" section. Yes Send Parameters With the Request The query string will be generated from the list of parameters you provide. Each parameter has a name and value , the options to encode the parameter, and an option to include or exclude an equals sign (some applications don't expect an equals when the value is the empty string). The query string will be generated in the correct fashion, depending on the choice of "Method" you made (ie if you chose GET, the query string will be appended to the URL, if POST, then it will be sent separately). Also, if you are sending a file using a multipart form, the query string will be created using the multipart form specifications. Additionally, you can specify whether each paramter should be URL encoded. If you are not sure what this means, it is probably best to select it. If your values contain characters such as & or spaces, or question marks, then encoding is usually required. No Filename Name of the file to send. If left blank, JMeter does not send a file, if filled in, JMeter automatically sends the request as a multipart form request. In versions of JMeter after 2.2: if both the 'name' atribute and MIME type (below) are omitted, then the file is sent as the body of the POST request. This allows arbitrary POST bodies to be sent. No Value for 'name' attribute Value of the "name" web request parameter. No MIME Type MIME type (for example, text/plain). No Retrieve All Embedded Resources from HTML Files Tell JMeter to parse the HTML file and send HTTP/HTTPS requests for all images, Java applets, JavaScript files, CSSs, etc. referenced in the file. See below for more details. No Use as monitor For use with the Monitor Results listener. Yes Embedded URLs must match: If present, this must be a regular expression that is used to match against any embedded URLs found. So if you only want to download embedded resources from http://server.com/, use the expression: http://server\.com/.* No N.B. when using automatic redirection, cookies are only sent for the initial URL. This can cause unexpected behaviour for web-sites that redirect to a local server. E.g. if www.example.com redirects to www.example.co.uk. In this case the server will probably return cookies for both URLs, but JMeter will only see the cookies for the last host, i.e. www.example.co.uk. If the next request uses www.example.com, rather than www.example.co.uk, it will not get the correct cookies. This is generally only a problem for manually created test plans, as a test plan created using a recorder would continue from the redirected URL. Upto and including JMeter 2.1.1, only responses with the content-type "text/html" were scanned for embedded resources. Other content-types were assumed to be something other than HTML. JMeter 2.1.2 introduces the a new property HTTPResponse.parsers , which is a list of parser ids, e.g. htmlParser and wmlParser . For each id found, JMeter checks two further properties: id.types - a list of content types id.className - the parser to be used to extract the embedded resources See jmeter.properties file for the details of the settings. If the HTTPResponse.parser property is not set, JMeter reverts to the previous behaviour, i.e. only text/html responses will be scanned See Also: Assertion Building a Web Test Plan Building an Advanced Web Test Plan HTTP Authorization Manager HTTP Cookie Manager HTTP Header Manager HTML Link Parser HTTP Proxy Server HTTP Request Defaults HTTP Requests and Session ID's: URL Rewriting

---

18.1.3 JDBC Request

This sampler lets you send an JDBC Request (an SQL query) to a database. Before using this you need to set up a JDBC Connection Configuration Configuration element Control Panel Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree. No Variable Name Name of the JMeter variable that the connection pool is bound to. This must agree with the 'Variable Name' field of a JDBC Connection Configuration. Yes Query Type Set this according to the statement type: Select Statement Update Statement - use this for Inserts as well Callable Statement Prepared Select Statement Prepared Update Statement - use this for Inserts as well Commit Rollback Autocommit(false) Autocommit(true) Edit - this should be a variable reference that evaluates to one of the above Yes SQL Query SQL query. Do not enter a trailing semi-colon. There is no need to use { and } to enclose Callable statements. For example: select * from t_customers where id=23 CALL SYSCS_UTIL.SYSCS_EXPORT_TABLE (null,?, ?, null, null, null) Parameter values: tablename,filename Parameter types: VARCHAR,VARCHAR The second example assumes you are using Apache Derby. Yes Parameter values Comma-separated list of parameter values. Use ]NULL[ to indicate a NULL parameter. (If required, the null string can be changed by defining the property "jdbcsampler.nullmarker".) There must be as many values as there are placeholders in the statement. Yes, if a prepared or callable statement has parameters Parameter types Comma-separated list of SQL parameter types (e.g. INTEGER, DATE, VARCHAR, DOUBLE). There must be as many values as there are placeholders in the statement. Yes, if a prepared or callable statement has parameters See Also: Building a Database Test Plan JDBC Connection Configuration

---

18.1.4 Java Request

This sampler lets you control a java class that implements the JavaSamplerClient interface. By writing your own implementation of this interface, you can use JMeter to harness multiple threads, input parameter control, and data collection. The pull-down menu provides the list of all such implementations found by JMeter in its classpath. The parameters can then be specified in the table below - as defined by your implementation. Two simple examples (JavaTest and SleepTest) are provided. The JavaTest example sampler can be useful for checking test plans, because it allows one to set values in almost all the fields. These can then be used by Assertions, etc. The fields allow variables to be used, so the values of these can readily be seen. Control Panel The Add/Delete buttons don't serve any purpose at present. Parameters Attribute Description Required Name Descriptive name for this sampler that is shown in the tree. No Classname The specific implementation of the JavaSamplerClient interface to be sampled. Yes Send Parameters with Request A list of arguments that will be passed to the sampled class. All arguments are sent as Strings. No

---

The sleep time is calculated as follows:

								
SleepTime is in milliseconds
SleepMask is used to add a "random" element to the time:
totalSleepTime = SleepTime + (System.currentTimeMillis() % SleepMask)

						

18.1.5 SOAP/XML-RPC Request

This sampler lets you send a SOAP request to a webservice. It can also be used to send XML-RPC over HTTP. It creates an HTTP POST request, with the specified XML as the POST content. To change the "Content-type" from the default of "text/html", use a HeaderManager. Note that the sampler will use all the headers from the HeaderManager. If a SOAP action is specified, that will override any SOAPaction in the HeaderManager. The primary difference between the soap sampler and webservice sampler, is the soap sampler uses raw post and does not require conformance to XML. For versions of JMeter later than 2.2, the sampler no longer uses chunked encoding by default. For screen input, it now always uses the size of the data. File input uses the file length as determined by Java. On some OSes this may not work for all files, in which case add a child Header Manager with Content-Length set to the actual length of the file. Or set Content-Length to -1 to force chunked encoding. Control Panel Parameters Attribute Description Required Name Descriptive name for this sampler that is shown in the tree. No URL The URL to direct the SOAP request to. Yes Send SOAP action Send a SOAP action header? (overrides the Header Manager) No Soap/XML-RPC Data The Soap XML message, or XML-RPC instructions. Not used if the filename is provided. No Filename If specified, then the contents of the file are sent, and the Data field is ignored No

---

18.1.6 WebService(SOAP) Request

This sampler has been tested with IIS Webservice running .NET 1.0 and .NET 1.1. It has been tested with SUN JWSDP, IBM webservices, Axis and gSoap toolkit for C/C++. The sampler uses Apache SOAP driver to serialize the message and set the header with the correct SOAPAction. Right now the sampler doesn't support automatic WSDL handling, since Apache SOAP currently does not provide support for it. Both IBM and SUN provide WSDL drivers. There are 3 options for the post data: text area, external file, or directory. If you want the sampler to randomly select a message, use the directory. Otherwise, use the text area or a file. The if either the file or path are set, it will not use the message in the text area. If you need to test a soap service that uses different encoding, use the file or path. If you paste the message in to text area, it will not retain the encoding and will result in errors. Save your message to a file with the proper encoding, and the sampler will read it as java.io.FileInputStream. The sampler requires mail.jar and activation.jar. This is because Apache SOAP requires the libs. Because mail.jar and activation.jar are distributed by Sun, you have to download it separately. An important note on the sampler is it will automatically use the proxy host and port passed to JMeter from command line, if thoe fields in the sampler are left blank. If a sampler has values in the proxy host and port text field, it will use the ones provided by the user. This behavior may not be what users expect. By default, the webservice sampler set SOAPHTTPConnection.setMaintainSession (true). If you need to maintain the session, add a blank Header Manager. The sampler uses the Header Manager to store the SOAPHTTPConnection object, since there apache soap does provide a easy way to get and set the cookies. Note: If you are using CSVDataSet, do not check "Memory Cache". If memory cache is checked, it will not iterate to the next value. That means all the requests will use the first value. Make sure you use <soap:Envelope rather than <Envelope. For example: <?xml version="1.0" encoding="utf-8"?> <soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"> <soap:Body> <foo xmlns="http://clients-xlmns"/> </soap:Body> </soap:Envelope> Control Panel Parameters Attribute Description Required Name Descriptive name for this sampler that is shown in the tree. No WSDL URL The WSDL URL with the service description. No Webmethods The WSDL URL with the service description. No Protocol HTTP or HTTPS are acceptable protocol. Yes Server Name or IP The hostname or IP address. Yes Port Number Port Number. Yes Path Path for the webservice. Yes SOAPAction The SOAPAction defined in the webservice description or WSDL. Yes Soap/XML-RPC Data The Soap XML message Yes Soap file File containing soap message No Message Folder Folder containing soap files No Memory cache caches the request data Yes Use HTTP Proxy Check box if http proxy should be used No Proxy Host Proxy hostname No Proxy Port Proxy host port No

---

18.1.7 LDAP Request

This Sampler lets you send a different Ldap request(Add, Modify, Delete and Search) to an LDAP server. If you are going to send multiple requests to the same LDAP server, consider using an LDAP Request Defaults Configuration Element so you do not have to enter the same information for each LDAP Request. The same way the Login Config Element also using for Login and password. Control Panel There are two ways to create test cases for testing an LDAP Server. Inbuilt Test cases. User defined Test cases. There are four test scenarios of testing LDAP. The tests are given below: Add Test Inbuilt test : This will add a pre-defined entry in the LDAP Server and calculate the execution time. After execution of the test, the created entry will be deleted from the LDAP Server. User defined test : This will add the entry in the LDAP Server. User has to enter all the attributes in the table.The entries are collected from the table to add. The execution time is calculated. The created entry will not be deleted after the test. Modify Test Inbuilt test : This will create a pre-defined entry first, then will modify the created entry in the LDAP Server.And calculate the execution time. After execution of the test, the created entry will be deleted from the LDAP Server. User defined test This will modify the entry in the LDAP Server. User has to enter all the attributes in the table. The entries are collected from the table to modify. The execution time is calculated. The entry will not be deleted from the LDAP Server. Search Test Inbuilt test : This will create the entry first, then will search if the attributes are available. It calculates the execution time of the search query. At the end of the execution,created entry will be deleted from the LDAP Server. User defined test This will search the user defined entry(Search filter) in the Search base (again, defined by the user). The entries should be available in the LDAP Server. The execution time is calculated. Delete Test Inbuilt test : This will create a pre-defined entry first, then it will be deleted from the LDAP Server. The execution time is calculated. User defined test This will delete the user-defined entry in the LDAP Server. The entries should be available in the LDAP Server. The execution time is calculated. Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree. No Server Name or IP Domain name or IP address of the LDAP server. JMeter assumes the LDAP server is listening on the default port(389). Yes Port default port(389). Yes root DN DN for the server to communicate Yes Username LDAP server username. Usually Password LDAP server password. Usually Entry DN the name of the context to create or Modify; may not be empty Example: do you want to add cn=apache,ou=test you have to add in table name=cn, value=apache yes Delete the name of the context to Delete; may not be empty yes Search base the name of the context or object to search yes Search filter the filter expression to use for the search; may not be null yes add test this name, value pair to added in the given context object yes modify test this name, value pair to add or modify in the given context object yes See Also: Building an Ldap Test Plan LDAP Request Defaults

---

18.1.8 LDAP Extended Request

This Sampler can send all 8 different LDAP request to an LDAP server. It is an extended version of the LDAP sampler, therefore it is harder to configure, but can be made much closer resembling a real LDAP session. If you are going to send multiple requests to the same LDAP server, consider using an LDAP Extended Request Defaults Configuration Element so you do not have to enter the same information for each LDAP Request. Control Panel There are nine test operations defined. These operations are given below: Thread bind Any LDAP request is part of an LDAP session, so the first thing that should be done is starting a session to the LDAP server. For starting this session a thread bind is used, which is equal to the LDAP "bind" operation. The user is requested to give a username (Distinghuised name) and password, which will be used to initiate a session. When no password, or the wrong password is specified, an anonymous session is started. Take care, omitting the password will not fail this test, a wrong password will. Parameters Attribute Description Required Name Descriptive name for this sampler that is shown in the tree. No Servername The name (or IP-address) of the LDAP server. Yes Port The port number that the LDAP server is listening to. If this is omitted JMeter assumes the LDAP server is listening on the default port(389). No DN The distinghuished name of the base object that will be used for any subsequent operation. It can be used as a starting point for all operations. You cannot start any operation on a higher level than this DN! No Username Full distinghuished name of the user as which you want to bind. No Password Password for the above user. If omitted it will result in an anonymous bind. If is is incorrect, the sampler will return an error and revert to an anonymous bind. No Thread unbind This is simply the operation to end a session. It is equal to the LDAP "unbind" operation. Parameters Attribute Description Required Name Descriptive name for this sampler that is shown in the tree. No Single bind/unbind This is a combination of the LDAP "bind" and "unbind" operations. It can be used for an authentication request/password check for any user. It will open an new session, just to check the validity of the user/password combination, and end the session again. Parameters Attribute Description Required Name Descriptive name for this sampler that is shown in the tree. No Username Full distinghuished name of the user as which you want to bind. Yes Password Password for the above user. If omitted it will result in an anonymous bind. If is is incorrect, the sampler will return an error. No Rename entry This is the LDAP "moddn" operation. It can be used to rename an entry, but also for moving an entry or a complete subtree to a different place in the LDAP tree. Parameters Attribute Description Required Name Descriptive name for this sampler that is shown in the tree. No Old entry name The current distinghuished name of the object you want to rename or move, relative to the given DN in the thread bind operation. Yes New distinghuished name The new distinghuished name of the object you want to rename or move, relative to the given DN in the thread bind operation. Yes Add test This is the ldap "add" operation. It can be used to add any kind of object to the LDAP server. Parameters Attribute Description Required Name Descriptive name for this sampler that is shown in the tree. No Entry DN Distinghuised name of the object you want to add, relative to the given DN in the thread bind operation. Yes Add test A list of attributes and their values you want to use for the object. If you need to add a multiple value attribute, you need to add the same attribute with their respective values several times to the list. Yes Delete test This is the LDAP "delete" operation, it can be used to delete an object from the LDAP tree Parameters Attribute Description Required Name Descriptive name for this sampler that is shown in the tree. No Delete Distinghuished name of the object you want to delete, relative to the given DN in the thread bind operation. Yes Search test This is the LDAP "search" operation, and will be used for defining searches. Parameters Attribute Description Required Name Descriptive name for this sampler that is shown in the tree. No Search base Distinghuished name of the subtree you want your search to look in, relative to the given DN in the thread bind operation. No Search Filter searchfilter, must be specified in LDAP syntax. Yes Scope Use 0 for baseobject-, 1 for onelevel- and 2 for a subtree search. (Default=0) No Size Limit Specify the maximum number of results you want back from the server. (default=0, which means no limit.) When the sampler hits the maximum number of results, it will fail with errorcode 4 No Time Limit Specify the maximum amount of (cpu)time (in miliseconds) that the server can spend on your search. Take care, this does not say anything about the responsetime. (default is 0, which means no limit) No Attributes Specify the attributes you want to have returned, seperated by a semicolon. An empty field will return all attributes No Return object Whether the object will be returned (true) or not (false). Default=false No Dereference aliases If true, it will dereference aliases, if false, it will not follow them (default=false) No Modification test This is the LDAP "modify" operation. It can be used to modify an object. It can be used to add, delete or replace values of an attribute. Parameters Attribute Description Required Name Descriptive name for this sampler that is shown in the tree. No Entry name Distinghuished name of the object you want to modify, relative to the given DN in the thread bind operation Yes Modification test The attribute-value-opCode triples. The opCode can be any valid LDAP operationCode (add, delete/remove or replace). If you don't specify a value with a delete operation, all values of the given attribute will be deleted. If you do specify a value in a delete operation, only the given value will be deleted. If this value is non-existent, the sampler will fail the test. Yes Compare This is the LDAP "compare" operation. It can be used to compare the value of a given attribute with some already known value. In reality this is mostly used to check whether a given person is a member of some group. In such a case you can compare the DN of the user as a given value, with the values in the attribute "member" of an object of the type groupOfNames. If the compare operation fails, this test fails with errorcode 49. Parameters Attribute Description Required Name Descriptive name for this sampler that is shown in the tree. No Entry DN The current distinghuished name of the object of which you want to compare an attribute, relative to the given DN in the thread bind operation. Yes Compare filter In the form "attribute=value" Yes See Also: Building an LDAP Test Plan LDAP Extended Request Defaults

---

18.1.9 Access Log Sampler

(Alpha Code) AccessLogSampler was designed to read access logs and generate http requests. For those not familiar with the access log, it is the log the webserver maintains of every request it accepted. This means the every image and html file. The current implementation is complete, but some features have not been enabled. There is a filter for the access log parser, but I haven't figured out how to link to the pre-processor. Once I do, changes to the sampler will be made to enable that functionality. Tomcat uses the common format for access logs. This means any webserver that uses the common log format can use the AccessLogSampler. Server that use common log format include: Tomcat, Resin, Weblogic, and SunOne. Common log format looks like this: 127.0.0.1 - - [21/Oct/2003:05:37:21 -0500] "GET /index.jsp?%2Findex.jsp= HTTP/1.1" 200 8343 The current implemenation of the parser only looks at the text within the quotes. Everything else is stripped out and igored. For example, the response code is completely ignored by the parser. For the future, it might be nice to filter out entries that do not have a response code of 200. Extending the sampler should be fairly simple. There are two interfaces you have to implement. org.apache.jmeter.protocol.http.util.accesslog.LogParser org.apache.jmeter.protocol.http.util.accesslog.Generator The current implementation of AccessLogSampler uses the generator to create a new HTTPSampler. The servername, port and get images are set by AccessLogSampler. Next, the parser is called with integer 1, telling it to parse one entry. After that, HTTPSampler.sample() is called to make the request. samp = (HTTPSampler) GENERATOR.generateRequest(); samp.setDomain(this.getDomain()); samp.setPort(this.getPort()); samp.setImageParser(this.isImageParser()); PARSER.parse(1); res = samp.sample(); res.setSampleLabel(samp.toString()); The required methods in LogParser are: setGenerator(Generator) and parse(int). Classes implementing Generator interface should provide concrete implementation for all the methods. For an example of how to implement either interface, refer to StandardGenerator and TCLogParser. Control Panel Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree. No Server Domain name or IP address of the web server. Yes Port Port the web server is listening to. No (defaults to 80) Log parser class The log parser class is responsible for parsing the logs. No (default provided) Generator class The generator class is responsible for creating HTTPSampler objects. No (default provided) Location of log file The location of the access log file. Yes

---

18.1.10 BeanShell Sampler

This sampler allows you to write a sampler using the BeanShell scripting language. Please note that the BeanShell jar file is not included with JMeter; it needs to be separately downloaded. For full details on using BeanShell, please see the BeanShell web-site at http://www.beanshell.org/. The test element supports the ThreadListener and TestListener methods. These should be defined in the initialisation file. See the file BeanShellListeners.bshrc for example definitions. Control Panel Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree. no Parameters List of parameters to be passed to the script file or the script. no Script File Name of a file to be used as a BeanShell script (yes) Script Script to be passed to BeanShell (yes) N.B. Each Sampler instance has its own BeanShell interpeter, and Samplers are only called from a single thread If the property "beanshell.sampler.init" is defined, it is passed to the Interpreter as the name of a sourced file. This can be used to define common methods and variables. There is a sample init file in the bin directory: BeanShellSampler.bshrc. If a script file is supplied, that will be used, otherwise the script will be used. Before invoking the script, some variables are set up in the BeanShell interpreter: The contents of the Parameters field is put into the variable "Parameters". The string is also split into separate tokens using a single space as the separator, and the resulting list is stored in the String array bsh.args. The full list of variables that is set up is as follows: log - the Logger Label - the Sampler label FileName - the file name, if any Parameters - text from the Parameters field bsh.args - the parameters, split as described above SampleResult - pointer to the current SampleResult ResponseCode = 200 ResponseMessage = "OK" IsSuccess = true ctx - JMeterContext vars - JMeterVariables - e.g. vars.get("VAR1"); vars.put("VAR2","value"); vars.remove("VAR3"); vars.putObject("OBJ1",new Object()); When the script completes, control is returned to the Sampler, and it copies the contents of the following script variables into the corresponding variables in the SampleResult: ResponseCode - for example 200 ResponseMessage - for example "OK" IsSuccess - true/false The Sampler ResponseData is set from the return value of the script. Since version 2.1.2, if the script returns null, it can set the response directly, by using the method SampleResponse.setResponseData(data), where data is either a String or a byte array. The data type defaults to "text", but can be set to binary by using the method SampleResponse.setDataType(SampleResponse.BINARY). The SampleResult variable gives the script full access to all the fields and methods in the SampleResult. For example, the script has access to the methods setStopThread(boolean) and setStopTest(boolean). Here is a simple (not very useful!) example script: if (bsh.args[0].equalsIgnoreCase("StopThread")) { log.info("Stop Thread detected!"); SampleResult.setStopThread(true); } return "Data from sample with Label "+Label; //or, since version 2.1.2 SampleResult.setResponseData("My data"); return null; Another example: ensure that the property beanshell.sampler.init=BeanShellSampler.bshrc is defined in jmeter.properties. The following script will show the values of all the variables in the ResponseData field: return getVariables(); For details on the methods available for the various classes (JMeterVariables, SampleResult etc) please check the Javadoc or the source code. Beware however that misuse of any methods can cause subtle faults that may be difficult to find ...

---

18.1.11 BSF Sampler

This sampler allows you to write a sampler using a BSF scripting language. See the Apache Bean Scripting Framework website for details of the languages supported. You may need to download the appropriate jars for the language; they should be put in the JMeter lib directory. Control Panel Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree. No Scripting Language Name of the BSF scripting language to be used. Yes Script File Name of a file to be used as a BSF script No Parameters List of parameters to be passed to the script file or the script. No Script Script to be passed to BSF language Yes (unless script file is provided) If a script file is supplied, that will be used, otherwise the script will be used. Before invoking the script, some variables are set up: The contents of the Parameters field is put into the variable "Parameters". The string is also split into separate tokens using a single space as the separator, and the resulting list is stored in the String array args. The full list of variables that is set up is as follows: log - the Logger Label - the Sampler label FileName - the file name, if any Parameters - text from the Parameters field args - the parameters, split as described above SampleResult - pointer to the current SampleResult ctx - JMeterContext vars - JMeterVariables - e.g. vars.get("VAR1"); vars.put("VAR2","value"); vars.remove("VAR3"); vars.putObject("OBJ1",new Object()); The Sampler ResponseData is set from the return value of the script. If the script returns null, it can set the response directly, by using the method SampleResponse.setResponseData(data), where data is either a String or a byte array. The data type defaults to "text", but can be set to binary by using the method SampleResponse.setDataType(SampleResponse.BINARY). The SampleResult variable gives the script full access to all the fields and methods in the SampleResult. For example, the script has access to the methods setStopThread(boolean) and setStopTest(boolean). Unlike the Beanshell Sampler, the BSF Sampler does not set the ResponseCode, ResponseMessage and sample status via script variables. Currently the only way to changes these is via the SampleResponse methods: SampleResponse.setSuccessful(true/false) SampleResponse.setResponseCode("code") SampleResponse.setResponseMessage("message")

---

18.1.12 TCP Sampler

ALPHA CODE The TCP Sampler opens a TCP/IP connection to the specified server. It then sends the text, and waits for a response. Connections are shared between Samplers in the same thread, provided that the exact same host name string and port are used. To force a different socket to be used, change the hostname by changing the case of one of the letters, e.g. www.apache.org and wWw.apache.org will use different sockets. If an error is detected, the socket is closed. Another socket will be reopened on the next sample. The following properties can be used to control its operation: tcp.status.prefix - text that precedes a status number tcp.status.suffix - text that follows a status number tcp.status.properties - name of property file to convert status codes to messages tcp.handler - Name of TCP Handler class (default TCPClientImpl) tcp.eolByte - decimal value. Defines the end of line byte value; used to determine when a response has been received The class that handles the connection is defined by the property tcp.handler. If not found, the class is then searched for in the package org.apache.jmeter.protocol.tcp.sampler. Users can provide their own implementation to replace the supplied class TCPClientImpl. The class must extend org.apache.jmeter.protocol.tcp.sampler.TCPClient. If tcp.status.prefix is defined, then the response message is searched for the text following that up to the suffix. If any such text is found, it is used to set the response code. The response message is then fetched from the properties file (if provided). For example, if the prefix = "[" and the suffix = "]", then the following repsonse: [J28] XI123,23,GBP,CR would have the response code J28. Response codes in the range "400"-"499" and "500"-"599" are currently regarded as failures; all others are successful. [This needs to be made configurable!] The login name/password are not used by the supplied TCP implementation. Sockets are disconnected at the end of a test run. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Name Descriptive name for this element that is shown in the tree. No ServerName or IP Name or IP of TCP server Yes Port Number Port to be used Yes Timeout (milliseconds) Timeout for replies No Set Nodelay Should the nodelay property be set? No Text to Send Text to be sent Yes Login User User Name No Password Password No

---

18.1.13 JMS Publisher

ALPHA CODE JMS Publisher will publish messages to a given pub/sub topic. For those not familiar with JMS, it is the J2EE specification for messaging. There are numerous JMS servers on the market and several open source options. JMeter does not include the JMS jar; this must be downloaded and put in the lib directory Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No use JNDI properties file use jndi.properties to create topic Yes JNDI Initial Context Factory Name of the context factory No Provider URL The URL for the jms provider No Topic the message topic Yes Authentication Authentication requirement for the JMS provider Yes User User Name No Password Password No Number of samples to aggregate number of samples to aggregate Yes configuration setting for the message Yes Message type text or object message Yes

---

18.1.14 JMS Subscriber

ALPHA CODE JMS Publisher will subscribe to messages in a given pub/sub topic. For those not familiar with JMS, it is the J2EE specification for messaging. There are numerous JMS servers on the market and several open source options. JMeter does not include the JMS jar; this must be downloaded and put in the lib directory Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No use JNDI properties file use jndi.properties to create topic Yes JNDI Initial Context Factory Name of the context factory No Provider URL The URL for the jms provider No Topic the message topic Yes Authentication Authentication requirement for the JMS provider Yes User User Name No Password Password No Number of samples to aggregate number of samples to aggregate Yes Read response should the sampler read the response Yes Client Which client to use Yes

---

18.1.15 JMS Point-to-Point

ALPHA CODE This sampler sends and optionally receives JMS Messages through point-to-point connections (queues). It is different from pub/sub messages and is generally used for handling transactions. JMeter does not include the JMS jar; this must be downloaded and put in the lib directory Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No QueueConnection Factory The JNDI name of the queue connection factory to use for connecting to the messaging system. Yes JNDI Name Request queue This is the JNDI name of the queue to which the messages are sent. Yes JNDI Name Reply queue The JNDI name of the receiving queue. If a value is provided here and the communication style is Request Response this queue will be monitored for responses to the requests sent. No Communication style The Communication style can be Request Only (also known as Fire and Forget) or Request Reply. Request Only will only sent messages and will not monitor replies. As such it can be used to put load on a system. Request Reply will sent messages and monitor the replies it receives. Behaviour is depended on the value of the JNDI Name Reply Queue. If JNDI Name Reply Queue has a value, this queue is used to monitor the results. Matching of request and reply is done with the message id of the request with the correlation id of the reply. If the JNDI Name Reply Queue is empty, then temporary queues will be used for the communication between the requestor and the server. This is very different from the fixed reply queue. With temporary queues the diffent threads will block until the reply message has been received. Yes Timeout The timeout in milliseconds for the reply-messages. If a reply has not been received within the specified time, the specific testcase failes and the specific reply message received after the timeout is discarded. Yes Use non-persistent delivery mode? Whether to set DeliveryMode.NON_PERSISTENT. Yes Content The content of the message. No JMS Properties The JMS Properties are properties specific for the underlying messaging system. For example: for WebSphere 5.1 web services you will need to set the JMS Property targetService to test webservices through JMS. No Initial Context Factory The Initial Context Factory is the factory to be used to look up the JMS Resources. No JNDI properties The JNDI Properties are the specific properties for the underlying JNDI implementation. No Provider URL The URL for the jms provider. No

---

18.1.16 JUnit Request

The current implementation supports standard Junit convention and extensions. It also includes extensions like oneTimeSetUp and oneTimeTearDown. The sampler works like the JavaSampler with some differences. 1. rather than use Jmeter's test interface, it scans the jar files for classes extending junit's TestCase class. That includes any class or subclass. 2. Junit test jar files should be placed in jmeter/lib/junit instead of /lib directory. 3. Junit sampler does not use name/value pairs for configuration like the JavaSampler. The sampler assumes setUp and tearDown will configure the test correctly. 4. The sampler measures the elapsed time only for the test method and does not include setUp and tearDown. 5. Each time the test method is called, Jmeter will pass the result to the listeners. 6. Support for oneTimeSetUp and oneTimeTearDown is done as a method. Since Jmeter is multi-threaded, we cannot call oneTimeSetUp/oneTimeTearDown the same way Maven does it. 7. The sampler reports unexpected exceptions as errors. There are some important differences between standard JUnit test runners and JMeter's implementation. Rather than make a new instance of the class for each test, JMeter creates 1 instance per sampler and reuses it. The current implementation of the sampler will try to create an instance using the string constructor first. If the test class does not declare a string constructor, the sampler will look for an empty constructor. Example below: Empty Constructor: public class myTestCase { public myTestCase() {} } String Constructor: public class myTestCase { public myTestCase(String text) { super(text); } } By default, Jmeter will provide some default values for the success/failure code and message. Users should define a set of unique success and failure codes and use them uniformly across all tests. General Guidelines If you use setUp and tearDown, make sure the methods are declared public. If you do not, the test may not run properly. Here are some general guidelines for writing Junit tests so they work well with Jmeter. Since Jmeter runs multi-threaded, it is important to keep certain things in mind. 1. Write the setUp and tearDown methods so they are thread safe. This generally means avoid using static memebers. 2. Make the test methods discrete units of work and not long sequences of actions. By keeping the test method to a descrete operation, it makes it easier to combine test methods to create new test plans. 3. Avoid making test methods depend on each other. Since Jmeter allows arbitrary sequencing of test methods, the runtime behavior is different than the default Junit behavior. 4. If a test method is configurable, be careful about where the properties are stored. Reading the properties from the Jar file is recommended. 5. Each sampler creates an instance of the test class, so write your test so the setup happens in oneTimeSetUp and oneTimeTearDown. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Package filter Comma separated list of packages to show. Example, org.apache.jmeter,junit.framework. No Class name Fully qualified name of the JUnit test class. No Constructor string String pass to the string constructor. If a string is set, the sampler will use the string constructor instead of the empty constructor. No Test method The method to test. No Success message A descriptive message indicating what success means. No Success code An unique code indicating the test was successful. No Failure message A descriptive message indicating what failure means. No Failure code An unique code indicating the test failed. No Error message A description for errors. No Error code Some code for errors. Does not need to be unique. No Do not call setUp and tearDown Set the sampler not to call setUp and tearDown. By default, setUp and tearDown should be called. Not calling those methods could affect the test and make it inaccurate. This option should only be used with calling oneTimeSetUp and oneTimeTearDown. If the selected method is oneTimeSetUp or oneTimeTearDown, this option should be checked. No

---

18.1.17 Mail Reader Sampler

TBA Control Panel

---

18.1.18 Test Action

The Test Action sampler is a sampler that is intended for use in a conditional controller. Rather than generate a sample, the test element eithers pauses - or stops the selected target. This sampler can also be useful in conjunction with the Transaction Controller, as it allows pauses to be included without needing to generate a sample. For variable delays, set the pause time to zero, and add a Timer as a child. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Target Current Thread / All Threads (ignored for Pause) Yes Action Pause / Stop Yes Duration How long to pause for (milliseconds) Yes

---

^

Logic Controllers determine the order in which Samplers are processed.

18.2.1 Simple Controller

The Simple Logic Controller lets you organize your Samplers and other Logic Controllers. Unlike other Logic Controllers, this controller provides no functionality beyond that of a storage device. Control Panel Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree. No Using the Simple Controller Download this example (see Figure 6). In this example, we created a Test Plan that sends two Ant HTTP requests and two Log4J HTTP requests. We grouped the Ant and Log4J requests by placing them inside Simple Logic Controllers. Remember, the Simple Logic Controller has no effect on how JMeter processes the controller(s) you add to it. So, in this example, JMeter sends the requests in the following order: Ant Home Page, Ant News Page, Log4J Home Page, Log4J History Page. Note, the File Reporter is configured to store the results in a file named "simple-test.dat" in the current directory. Figure 6 Simple Controller Example

---

18.2.2 Loop Controller

If you add Generative or Logic Controllers to a Loop Controller, JMeter will loop through them a certain number of times, in addition to the loop value you specified for the Thread Group. For example, if you add one HTTP Request to a Loop Controller with a loop count of two, and configure the Thread Group loop count to three, JMeter will send a total of 2 * 3 = 6 HTTP Requests. Control Panel Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree. No Loop Count The number of times the subelements of this controller will be iterated each time through a test run. Special Case: The Loop Controller embedded in the Thread Group element behaves slightly differently. Unless set to forever, it stops the test after the given number of iterations have been done. Yes, unless "Forever" is checked Looping Example Download this example (see Figure 4). In this example, we created a Test Plan that sends a particular HTTP Request only once and sends another HTTP Request five times. Figure 4 - Loop Controller Example We configured the Thread Group for a single thread and a loop count value of one. Instead of letting the Thread Group control the looping, we used a Loop Controller. You can see that we added one HTTP Request to the Thread Group and another HTTP Request to a Loop Controller. We configured the Loop Controller with a loop count value of five. JMeter will send the requests in the following order: Home Page, News Page, News Page, News Page, News Page, and News Page. Note, the File Reporter is configured to store the results in a file named "loop-test.dat" in the current directory.

---

18.2.3 Once Only Controller

The Once Only Logic Controller tells JMeter to process the controller(s) inside it only once, and pass over any requests under it during further iterations through the test plan. The Once Only Controller will now execute always during the first iteration of any looping parent controller. Thus, if the Once Only Controller is placed under a Loop Controller specified to loop 5 times, then the Once Only Controller will execute only on the first iteration through the Loop Controller (ie, every 5 times). Note this means the Once Only Controller will still behave as previously expected if put under a Thread Group (runs only once per test), but now the user has more flexibility in the use of the Once Only Controller. For testing that requires a login, consider placing the login request in this controller since each thread only needs to login once to establish a session. Control Panel Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree. No Once Only Example Download this example (see Figure 5). In this example, we created a Test Plan that has two threads that send HTTP request. Each thread sends one request to the Home Page, followed by three requests to the Bug Page. Although we configured the Thread Group to iterate three times, each JMeter thread only sends one request to the Home Page because this request lives inside a Once Only Controller. Figure 5. Once Only Controller Example Each JMeter thread will send the requests in the following order: Home Page, Bug Page, Bug Page, Bug Page. Note, the File Reporter is configured to store the results in a file named "loop-test.dat" in the current directory.

---

18.2.4 Interleave Controller

If you add Generative or Logic Controllers to an Interleave Controller, JMeter will alternate among each of the other controllers for each loop iteration. Control Panel Parameters Attribute Description Required name Descriptive name for this controller that is shown in the tree. No ignore sub-controller blocks If checked, the interleave controller will treat sub-controllers like single request elements and only allow one request per controller at a time. No Simple Interleave Example Download this example (see Figure 1). In this example, we configured the Thread Group to have two threads and a loop count of five, for a total of ten requests per thread. See the table below for the sequence JMeter sends the HTTP Requests. Figure 1 - Interleave Controller Example 1 Loop Iteration Each JMeter Thread Sends These HTTP Requests 1 News Page 2 Log Page 2 FAQ Page 2 Log Page 3 Gump Page 2 Log Page 4 Because there are no more requests in the controller, JMeter starts over and sends the first HTTP Request, which is the News Page. 2 Log Page 5 FAQ Page 2 Log Page Useful Interleave Example Download another example (see Figure 2). In this example, we configured the Thread Group to have a single thread and a loop count of eight. Notice that the Test Plan has an outer Interleave Controller with two Interleave Controllers inside of it. Figure 2 - Interleave Controller Example 2 The outer Interleave Controller alternates between the two inner ones. Then, each inner Interleave Controller alternates between each of the HTTP Requests. Each JMeter thread will send the requests in the following order: Home Page, Interleaved, Bug Page, Interleaved, CVS Page, Interleaved, and FAQ Page, Interleaved. Note, the File Reporter is configured to store the results in a file named "interleave-test2.dat" in the current directory. Figure 3 - Interleave Controller Example 3 If the two interleave controllers under the main interleave controller were instead simple controllers, then the order would be: Home Page, CVS Page, Interleaved, Bug Page, FAQ Page, Interleaved. However, if "ignore sub-controller blocks" was checked on the main interleave controller, then the order would be: Home Page, Interleaved, Bug Page, Interleaved, CVS Page, Interleaved, and FAQ Page, Interleaved.

---

18.2.5 Random Controller

The Random Logic Controller acts similarly to the Interleave Controller, except that instead of going in order through its sub-controllers and samplers, it picks one at random at each pass. Interactions between multiple controllers can yield complex behavior. This is particularly true of the Random Controller. Experiment before you assume what results any given interaction will give Control Panel Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree. No

---

18.2.6 Random Order Controller

The Random Order Controller is much like a Simple Controller in that it will execute each child element at most once, but the order of execution of the nodes will be random. Control Panel Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree. No

---

18.2.7 Throughput Controller

The Throughput Controller allows the user to control how often it is executed. There are two modes - percent execution and total executions. Percent executions causes the controller to execute a certain percentage of the iterations through the test plan. Total executions causes the controller to stop executing after a certain number of executions have occurred. Like the Once Only Controller, this setting is reset when a parent Loop Controller restarts. Control Panel The Throughput Controller can yield very complex behavior when combined with other controllers - in particular with interleave or random controllers as parents (also very useful). Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree. No Execution Style Whether the controller will run in percent executions or total executions mode. Yes Throughput A number. for percent execution mode, a number from 0-100 that indicates the percentage of times the controller will execute. "50" means the controller will execute during half the iterations throught the test plan. for total execution mode, the number indicates the total number of times the controller will execute. Yes Per User If checked, per user will cause the controller to calculate whether it should execute on a per user (per thread) basis. if unchecked, then the calculation will be global for all users. for example, if using total execution mode, and uncheck "per user", then the number given for throughput will be the total number of executions made. if "per user" is checked, then the total number of executions would be the number of users times the number given for throughput. No

---

18.2.8 Runtime Controller

The Runtime Controller controls how long its children are allowed to run. Control Panel Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree, and used to name the transaction. Yes Runtime (seconds) Desired runtime in seconds Yes

---

18.2.9 If Controller

The If Controller allows the user to control whether the test elements below it (its children) are run or not. Prior to JMeter 2.3RC3, the condition was evaluated for every runnable element contained in the controller. This sometimes caused unexpected behaviour, so 2.3RC3 was changed to evaluate the condition only once on initial entry. However, the original behaviour is also useful, so versions of JMeter after 2.3RC4 have an additional option to select the original behaviour. Control Panel Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree. No Condition Javascript code that returns "true" or "false" Yes Evaluate for all children Should condition be evaluated for all children? If not checked, then the condition is only evaluated on entry. Yes Examples: ${COUNT} < 10 "${VAR}" == "abcd" ${JMeterThread.last_sample_ok} (check if last sample succeeded) If there is an error interpreting the code, the condition is assumed to be false, and a message is logged in jmeter.log.

---

18.2.10 While Controller

The While Controller runs its children until the condition is "false". Possible condition values: blank - exit loop when last sample in loop fails LAST - exit loop when last sample in loop fails. If the last sample just before the loop failed, don't enter loop. Otherwise - exit (or don't enter) the loop when the condition is equal to the string "false" In contrast to the IfController, the condition is not evaluated as a JavaScript expression. The condition can be any variable or function that eventually evaluates to the string "false". This allows the use of JavaScript, BeanShell, properties or variables as needed. For example: ${VAR} - where VAR is set to false by some other test element ${__javaScript(${C}==10,dummy)} ${__javaScript("${VAR2}"=="abcd",dummy)} ${_P(property)} - where property is set to "false" somewhere else Control Panel Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree, and used to name the transaction. Yes Condition blank, LAST, or variable/function Yes

---

18.2.11 Switch Controller

The Switch Controller acts like the Interleave Controller in that it runs one of the subordinate elements on each iteration, but rather than run them in sequence, the controller runs the element number defined by the switch value. If the switch value is out of range, it will run the zeroth element, which therefore acts as the default. Control Panel Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree, and used to name the transaction. Yes Switch Value The number of the subordinate element to be invoked. Elements are numbered from 0. Yes

---

18.2.12 ForEach Controller

A ForEach controller loops through the values of a set of related variables. When you add samplers (or controllers) to a ForEach controller, every sample sample (or controller) is executed one or more times, where during every loop the variable has a new value. The input should consist of several variables, each extended with an underscore and a number. Each such variable must have a value. So for example when the input variable has the name inputVar, the following variables should have been defined: inputVar_1 = wendy inputVar_2 = charles inputVar_3 = peter inputVar_4 = john Note: the "_" separator is now optional. When the return variable is given as "returnVar", the collection of samplers and controllers under the ForEach controller will be executed 4 consecutive times, with the return variable having the respective above values, which can then be used in the samplers. It is especially suited for running with the regular expression post-processor. This can "create" the necessary input variables out of the result data of a previous request. By omitting the "_" separator, the ForEach Controller can be used to loop through the groups by using the input variable refName_g, and can also loop through all the groups in all the matches by using an input variable of the form refName_${C}_g, where C is a counter variable. The ForEach Controller does not run any samples if inputVar_1 is null. This would be the case if the Regular Expression returned no matches. Control Panel Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree. No Input variable prefix Prefix for the variable names to be used as input. Yes Output variable The name of the variable which can be used in the loop for replacement in the samplers Yes Use Separator If not checked, the "_" separator is omitted. Yes ForEach Example Download this example (see Figure 7). In this example, we created a Test Plan that sends a particular HTTP Request only once and sends another HTTP Request to every link that can be found on the page. Figure 7 - ForEach Controller Example We configured the Thread Group for a single thread and a loop count value of one. You can see that we added one HTTP Request to the Thread Group and another HTTP Request to the ForEach Controller. After the first HTTP request, a regular expression extractor is added, which extracts all the html links out of the return page and puts them in the inputVar variable In the ForEach loop, a HTTP sampler is added which requests all the links that were extracted from the first returned HTML page. ForEach Example Here is another example you can download. This has two Regular Expressions and ForEach Controllers. The first RE matches, but the second does not match, so no samples are run by the second ForEach Controller Figure 8 - ForEach Controller Example 2 The Thread Group has a single thread and a loop count of two. Sample 1 uses the JavaTest Sampler to return the string "a b c d". The Regex Extractor uses the expression (\w)\s which matches a letter followed by a space, and returns the letter (not the space). Any matches are prefixed with the string "inputVar". The ForEach Controller extracts all variables with the prefix "inputVar_", and executes its sample, passing the value in the variable "returnVar". In this case it will set the variable to the values "a" "b" and "c" in turn. The For 1 Sampler is another Java Sampler which uses the return variable "returnVar" as part of the sample Label and as the sampler Data. Sample 2, Regex 2 and For 2 are almost identical, except that the Regex has been changed to "(\w)\sx", which clearly won't match. Thus the For 2 Sampler will not be run.

---

18.2.13 Module Controller

The Module Controller provides a mechanism for substituting test plan fragments into the current test plan at run-time. A test plan fragment consists of a Controller and all the test elements (samplers etc) contained in it. The fragment can be located in any Thread Group, or on the WorkBench . If the fragment is located in a Thread Group, then its Controller can be disabled to prevent the fragment being run except by the Module Controller. Or you can store the fragments in a dummy Thread Group, and disable the entire Thread Group. There can be multiple fragments, each with a different series of samplers under them. The module controller can then be used to easily switch between these multiple test cases simply by choosing the appropriate controller in its drop down box. This provides convenience for running many alternate test plans quickly and easily. A fragment name is made up of the Controller name and all its parent names. For example: Test Plan / Protocol: JDBC / Control / Interleave Controller Any fragments used by the Module Controller must have a unique name, as the name is used to find the target controller when a test plan is reloaded. Control Panel The Module Controller should not be used with remote testing or non-gui testing in conjunction with Workbench components since the Workbench test elements are not part of test plan .jmx files. Any such test will fail. Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree. No Module to Run The module controller provides a list of all controllers loaded into the gui. Select the one you want to substitute in at runtime. Yes

---

18.2.14 Include Controller

The include controller is designed to use an external jmx file. To use it, add samples to a simple controller, then save the simple controller as a jmx file. The file can then be used in a test plan. This element does not support variables/functions in the filename field. However, if the property includecontroller.prefix is defined, the contents are used to prefix the pathname. Control Panel Parameters Attribute Description Required Filename The file to include. Yes

---

18.2.15 Transaction Controller

The Transaction Comntroller is used to group samplers by generating an additional sample which totals the nested samples. For JMeter versions after 2.3, there are two modes of operation additional sample is added after the nested samples additional sample is added as a parent of the nested samples The generated sample time includes all the times for the nested samplers, and any timers etc. Depending on the clock resolution, it may be slightly longer than the sum of the individual samplers plus timers. The clock might tick after the controller recorded the start time but before the first sample starts. Similarly at the end. The generated sample is only regarded as successful if all its sub-samples are successful. In parent mode, the individual samples can still be seen in the Tree View Listener, but no longer appear as separate entries in other Listeners. Also, the sub-samples do not appear in CSV log files, but they can be saved to XML files. In parent mode, Assertions (etc) can be added to the Transaction Controller. However by default they will be applied to both the individual samples and the overall transaction sample. To limit the scope of the Assertions, use a Simple Controller to contain the samples, and add the Assertions to the Simple Controller. Parent mode controllers do not currently properly support nested transaction controllers of either type. Control Panel Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree, and used to name the transaction. Yes Generate Parent Sample If checked, then the sample is generated as a parent of the other samples, otherwise the sample is generated as an independent sample. Yes

---

18.2.16 Recording Controller

The Recording Controller is a place holder indicating where the proxy server should record samples to. During test run, it has no effect, similar to the Simple Controller. But during recording using the HTTP Proxy Server , all recorded samples will by default be saved under the Recording Controller. Control Panel Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree. No

---

^

Most of the listeners perform several roles in addition to "listening" to the test results. They also provide means to view, save, and read saved test results.

Note that Listeners are processed at the end of the scope in which they are found.

The saving and reading of test results is generic. The various listeners have a panel whereby one can specify the file to which the results will be written (or read from). By default, the results are stored as XML files, typically with a ".jtl" extension. Storing as CSV is the most efficient option, but is less detailed than XML (the other available option).

To read existing results and display them, use the file panel Browse button to open the file.

Results can be read from XML or CSV format files. When reading from CSV results files, the header (if present) is used to determine which fields are present. In order to interpret a header-less CSV file correctly, the appropriate properties must be set in jmeter.properties.

Listeners can use a lot of memory if there are a lot of samples. Most of the listeners currently keep a copy of every sample in their scope, apart from:

• Simple Data Writer
• BeanShell Listener
• Assertion Results
• Mailer Visualizer
• Monitor Results
• Summary Report

To minimise the amount of memory needed, use the Simple Data Writer, and use the CSV format.

To change the default format, find the following line in jmeter.properties:

jmeter.save.saveservice.output_format=

The information to be saved is configurable. For maximum information, choose "xml" as the format and specify "Functional Test Mode" on the Test Plan element. If this box is not checked, the default saved data includes a time stamp (the number of milliseconds since midnight, January 1, 1970 UTC), the data type, the thread name, the label, the response time, message, and code, and a success indicator. If checked, all information, including the full response data will be logged.

The following example indicates how to set properties to get a vertical bar ("|") delimited format that will output results like:.

								
timeStamp|time|label|responseCode|threadName|dataType|success|failureMessage
02/06/03 08:21:42|1187|Backoffice Home|200|Thread Group-1|text|true|
02/06/03 08:21:42|47|Login BO|200|Thread Group-1|text|false|Test Failed, 
	expected to contain: password etc.

						

The corresponding jmeter.properties file excerpt is below. One oddity in this example is that the output_format is set to csv, which typically indicates comma-separated values. However, the default_delimiter was set to be a vertical bar instead of a comma, so the csv tag is a misnomer in this case.

								
#---------------------------------------------------------------------------
# Results file configuration
#---------------------------------------------------------------------------

# This section helps determine how result data will be saved.
# The commented out values are the defaults.

# legitimate values: xml, csv, db.  Only xml and csv are currently supported.
#jmeter.save.saveservice.output_format=xml


# true when field should be saved; false otherwise

# assertion_results_failure_message only affects CSV output
#jmeter.save.saveservice.assertion_results_failure_message=false
#
#jmeter.save.saveservice.data_type=true
#jmeter.save.saveservice.label=true
#jmeter.save.saveservice.response_code=true
# response_data is not currently supported for CSV output
#jmeter.save.saveservice.response_data=false
# Save ResponseData for failed samples
#jmeter.save.saveservice.response_data.on_error=false
#jmeter.save.saveservice.response_message=true
#jmeter.save.saveservice.successful=true
#jmeter.save.saveservice.thread_name=true
#jmeter.save.saveservice.time=true
#jmeter.save.saveservice.subresults=true
#jmeter.save.saveservice.assertions=true
#jmeter.save.saveservice.latency=true
#jmeter.save.saveservice.samplerData=false
#jmeter.save.saveservice.responseHeaders=false
#jmeter.save.saveservice.requestHeaders=false
#jmeter.save.saveservice.encoding=false
#jmeter.save.saveservice.bytes=true
#jmeter.save.saveservice.url=false
#jmeter.save.saveservice.filename=false
#jmeter.save.saveservice.thread_counts=false
#jmeter.save.saveservice.sample_count=false

# Timestamp format
# legitimate values: none, ms, or a format suitable for SimpleDateFormat
#jmeter.save.saveservice.timestamp_format=ms
#jmeter.save.saveservice.timestamp_format=MM/dd/yy HH:mm:ss

# Put the start time stamp in logs instead of the end
sampleresult.timestamp.start=true


# legitimate values: none, first, all
#jmeter.save.saveservice.assertion_results=none

# For use with Comma-separated value (CSV) files or other formats
# where the fields' values are separated by specified delimiters.
#jmeter.save.saveservice.default_delimiter=,
#jmeter.save.saveservice.print_field_names=false

						

The date format to be used for the timestamp_format is described in SimpleDateFormat . Bear in mind that choosing a date format other than "ms" is likely to make it impossible for JMeter to interpret the value when it is read in later for viewing purposes.

The entries in jmeter.properties are used to define the defaults; these can be overriden for individual listeners by using the Configure button, as shown below. The settings in jmeter.properties also apply to the listener that is added by using the -l command-line flag.

The internal viewing capabilities are described in the following subsections.

18.3.1 Sample Result Save Configuration

Listeners can be configured to save different items to the result log files (JTL) by using the Config popup as shown below. The defaults are defined as described in the previous section. Meaning of the sample attributes in the log files: by - bytes in responses de - data encoding dt - data type ec - error count (0 or 1, unless multiple samples are aggregated) lb - label lt - latency = time to initial response (ms) na - number of active threads in all thread groups ng - number of active threads in current thread group rc - response code (e.g. 200) rm - response message (e.g. OK) s - successful (true/false) sc - sample count (1, unless multiple samples are aggregated) t - elapsed time (ms) tn - thread name ts - timestamp (ms since 1970) Control Panel

---

18.3.2 Graph Full Results

No Description Control Panel

---

18.3.3 Graph Results

The Graph Results listener generates a simple graph that plots all sample times. Along the bottom of the graph, the current sample (black), the current average of all samples(blue), the current standard deviation (red), and the current throughput rate (green) are displayed in milliseconds. The throughput number represents the actual number of requests/minute the server handled. This calculation includes any delays you added to your test and JMeter's own internal processing time. The advantage of doing the calculation like this is that this number represents something real - your server in fact handled that many requests per minute, and you can increase the number of threads and/or decrease the delays to discover your server's maximum throughput. Whereas if you made calculations that factored out delays and JMeter's processing, it would be unclear what you could conclude from that number. Control Panel The following table briefly describes the items on the graph. Further details on the precise meaning of the statistical terms can be found on the web - e.g. Wikipedia - or by consulting a book on statistics. Data - plot the actual data values Average - plot the Average Median - plot the Median (midway value) Deviation - plot the Standard Deviation (a measure of the variation) Throughput - plot the number of samples per unit of time The individual figures at the bottom of the display are the current values. "Latest Sample" is the current elapsed sample time, shown on the graph as "Data".

---

18.3.4 Spline Visualizer

The Spline Visualizer provides a view of all sample times from the start of the test till the end, regardless of how many samples have been taken. The spline has 10 points, each representing 10% of the samples, and connected using spline logic to show a single continuous line. Control Panel

---

18.3.5 Assertion Results

The Assertion Results visualizer shows the Label of each sample taken. It also reports failures of any Assertions that are part of the test plan. Control Panel See Also: Response Assertion

---

18.3.6 View Results Tree

The View Results Tree shows a tree of all sample responses, allowing you to view the response for any sample. In addition to showing the response, you can see the time it took to get this response, and some response codes. Note that the Request panel only shows the headers added by JMeter. It does not show any headers (such as Host) that may be added by the HTTP protocol implementation. There are several ways to view the response, selectable by a radio button. The default view shows all of the text contained in the response. The HTML view attempts to render the response as HTML. The rendered HTML is likely to compare poorly to the view one would get in any web browser; however, it does provide a quick approximation that is helpful for initial result evaluation. If the "Download embedded resources" check-box is selected, the renderer may download images and style-sheets etc referenced by the HTML. If the checkbox is not selected, the renderer will not download images etc. The Render XML view will show response in tree style. Any DTD nodes or Prolog nodes will not show up in tree; however, response may contain those nodes. The Render JSON view will show the response in tree style (also handles JSON embedded in JavaScript). Control Panel The Control Panel (above) shows an example of an HTML display. Figure 9 (below) shows an example of an XML display. Figure 9 Sample XML display

---

18.3.7 Aggregate Report

The aggregate report creates a table row for each differently named request in your test. For each request, it totals the response information and provides request count, min, max, average, error rate, approximate throughput (request/second) and Kilobytes per second throughput. Once the test is done, the throughput is the actual through for the duration of the entire test. The thoughput is calculated from the point of view of the sampler target (e.g. the remote server in the case of HTTP samples). JMeter takes into account the total time over which the requests have been generated. If other samplers and timers are in the same thread, these will increase the total time, and therefore reduce the throughput value. So two identical samplers with different names will have half the throughput of two samplers with the same name. It is important to choose the sampler names correctly to get the best results from the Aggregate Report. Calculation of the Median and 90% Line values requires a lot of memory as details of every Sample have to be saved. See the Summary Report for a similar Listener that does not need so much memory. Label - The label of the sample. # Samples - The number of samples for the URL Average - The average time of a set of results Median - The median is the time in the middle of a set of results. 90% Line - the maximum time taken for the fastest 90% of the samples. # The remaining samples took longer than this. Min - The lowest time for the samples of the given URL Max - The longest time for the samples of the given URL Error % - Percent of requests with errors Throughput - Throughput measured in requests per second/minute/hour Kb/sec - The throughput measured in Kilobytes per second Control Panel

---

18.3.8 View Results in Table

This visualizer creates a row for every sample result. Like the View Results Tree , this visualizer uses a lot of memory. Control Panel

---

18.3.9 Simple Data Writer

This listener can record results to a file but not to the UI. It is meant to provide an efficient means of recording data by eliminating GUI overhead. When running in non-GUI mode, the -l flag can be used to create a data file. The fields to save are defined by JMeter properties. See the jmeter.properties file for details. Control Panel

---

18.3.10 Monitor Results

Monitor Results is a new Visualizer for displaying server status. It is designed for Tomcat 5, but any servlet container can port the status servlet and use this monitor. There are two primary tabs for the monitor. The first is the "Health" tab, which will show the status of one or more servers. The second tab labled "Performance" shows the performance for one server for the last 1000 samples. The equations used for the load calculation is included in the Visualizer. Currently, the primary limitation of the monitor is system memory. A quick benchmark of memory usage indicates a buffer of 1000 data points for 100 servers would take roughly 10Mb of RAM. On a 1.4Ghz centrino laptop with 1Gb of ram, the monitor should be able to handle several hundred servers. As a general rule, monitoring production systems should take care to set an appropriate interval. Intervals shorter than 5 seconds are too aggressive and have a potential of impacting the server. With a buffer of 1000 data points at 5 second intervals, the monitor would check the server status 12 times a minute or 720 times a hour. This means the buffer shows the performance history of each machine for the last hour. The monitor requires Tomcat 5 or above. Use a browser to check that you can access the Tomcat status servlet OK. Control Panel

---

18.3.11 Distribution Graph (alpha)

The distribution graph will display a bar for every unique response time. Since the granularity of System.currentTimeMillis() is 10 milliseconds, the 90% threshold should be within the width of the graph. The graph will draw two threshold lines: 50% and 90%. What this means is 50% of the response times finished between 0 and the line. The same is true of 90% line. Several tests with Tomcat were performed using 30 threads for 600K requests. The graph was able to display the distribution without any problems and both the 50% and 90% line were within the width of the graph. A performant application will generally produce results that clump together. A poorly written application that has memory leaks may result in wild fluctuations. In those situations, the threshold lines may be beyond the width of the graph. The recommended solution to this specific problem is fix the webapp so it performs well. If your test plan produces distribution graphs with no apparent clumping or pattern, it may indicate a memory leak. The only way to know for sure is to use a profiling tool. Control Panel

---

18.3.12 Aggregate Graph

The aggregate graph is similar to the aggregate report. The primary difference is the aggregate graph provides an easy way to generate bar graphs and save the graph as a PNG file. By default, the aggregate graph will generate a bar chart 450 x 250 pixels. Control Panel

---

18.3.13 Mailer Visualizer

The mailer visualizer can be set up to send email if a test run receives too many failed responses from the server. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No From Email address to send messages from. Yes Addressie(s) Email address to send messages to. Yes SMTP Host IP address or host name of SMTP (email redirector) server. No Failure Subject Email subject line for fail messages. No Success Subject Email subject line for success messages. No Failure Limit Once this number of failed responses are received, a failure email is sent. Yes Success Limit Once this number of successful responses are received after previously reaching the failure limit , a success email is sent. The mailer will thus only send out messages in a sequence of failed-succeeded-failed-succeeded, etc. Yes Test Mail Press this button to send a test mail No Failures A field that keeps a running total of number of failures so far received. No

---

18.3.14 BeanShell Listener

The BeanShell Listener allows the use of BeanShell for processing samples for saving etc. Please note that the BeanShell jar file is not included with JMeter; it needs to be separately downloaded. For full details on using BeanShell, please see the BeanShell web-site at http://www.beanshell.org/. The test element supports the ThreadListener and TestListener methods. These should be defined in the initialisation file. See the file BeanShellListeners.bshrc for example definitions. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Script The BeanShell script. The return value is ignored. See below for variables defined to the script. Yes log - (Logger) - can be used to write to the log file ctx - (JMeterContext) - gives access to the context vars - (JMeterVariables) - gives read/write access to variables: vars.get(key); vars.put(key,val); vars.putObject("OBJ1",new Object()); sampleResult - (SampleResult) - gives access to the previous SampleResult sampleEvent (SampleEvent) gives access to the current sample event For details of all the methods available on each of the above variables, please check the Javadoc If the property beanshell.listener.init is defined, this is used to load an initialisation file, which can be used to define methods etc for use in the BeanShell script.

---

18.3.15 Summary Report

The summary report creates a table row for each differently named request in your test. This is similar to the Aggregate Report , except that it uses less memory. The thoughput is calculated from the point of view of the sampler target (e.g. the remote server in the case of HTTP samples). JMeter takes into account the total time over which the requests have been generated. If other samplers and timers are in the same thread, these will increase the total time, and therefore reduce the throughput value. So two identical samplers with different names will have half the throughput of two samplers with the same name. It is important to choose the sampler labels correctly to get the best results from the Report. Label - The label of the sample. # Samples - The number of samples for the URL Average - The average elapsed time of a set of results Min - The lowest elapsed time for the samples of the given URL Max - The longest elapsed time for the samples of the given URL Std. Dev. - the standard deviation of the sample elapsed time Error % - Percent of requests with errors Throughput - Throughput measured in requests per second/minute/hour Kb/sec - The throughput measured in Kilobytes per second Avg. Bytes - average size of the sample response in bytes. (in JMeter 2.2 it wrongly showed the value in kB) Control Panel

---

^

Configuration elements can be used to set up defaults and variables for later use by samplers. Note that these elements are processed at the start of the scope in which they are found, i.e. before any samplers in the same scope.

18.4.1 CSV Data Set Config

CSV Data Set Config is used to read lines from a file, and split them into variables. It is easier to use than the __CSVRead() and _StringFromFile() functions. The file is only opened once, and each thread will use a different line from the file. Lines are read as the threads need them. CSV Dataset variables are defined after configuration processing is completed, so they cannot be used for some configuration items - such as JDBC Config - that process their contents at configuration time (see Bug 40394 ) However the variables do work in the HTTP Auth Manager, as the username etc are processed at run-time. As a special case, the string "\t" (without quotes) is treated as a Tab. When the end of file (EOF) is reached, and the recycle option is true, reading starts again with the first line of the file. If the recycle option is false, and stopThread is false, then all the variables are set to <EOF> when the end of file is reached. This value can be changed by setting the JMeter property csvdataset.eofstring . If the Recycle option is false, and Stop Thread is true, then reaching EOF will cause the thread to be stopped. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Filename Name of the file to be read. Relative file names are resolved with respect to the current test plan. Absolute file names are also supported, but note that they are unlikely to work in remote mode, unless the remote server has the same directory structure. Yes Variable Names List of variable names (comma-delimited) Yes Delimiter Delimiter to be used to split the records in the file. If there are fewer values on the line than there are variables the remaining variables are not updated - so they will retain their previous value (if any). Yes Recycle on EOF? Should the file be re-read from the beginning on reaching EOF? (default is true) Yes Stop thread on EOF? Should the thread be stopped on EOF, if Recycle is false? (default is false) Yes

---

18.4.2 FTP Request Defaults

Control Panel

---

18.4.3 HTTP Authorization Manager

If there is more than one Authorization Manager in the scope of a Sampler, there is currently no way to sepcify which one is to be used. The Authorization Manager lets you specify one or more user logins for web pages that are restricted using server authentication. You see this type of authentication when you use your browser to access a restricted page, and your browser displays a login dialog box. JMeter transmits the login information when it encounters this type of page. In versions of JMeter after 2.2, the HttpClient sampler defaults to pre-emptive authentication if the setting has not been defined. To disable this, set the values as below, in which case authentication will only be performed in response to a challenge. jmeter.properties: httpclient.parameters.file=httpclient.parameters httpclient.parameters: http.authentication.preemptive$Boolean=false Note: the above settings only apply to the HttpClient sampler (and the SOAP samplers, which use Httpclient). When looking for a match against a URL, JMeter checks each entry in turn, and stops when it finds the first match. Thus the most specific URLs should appear first in the list, followed by less specific ones. Duplicate URLs will be ignored. If you want to use different usernames/passwords for different threads, you can use variables. These can be set up using a CSV Data Set Config Element (for example). Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Base URL A partial or complete URL that matches one or more HTTP Request URLs. As an example, say you specify a Base URL of "http://jakarta.apache.org/restricted/" with a username of "jmeter" and a password of "jmeter". If you send an HTTP request to the URL "http://jakarta.apache.org/restricted/ant/myPage.html", the Authorization Manager sends the login information for the user named, "jmeter". Yes Username The username to authorize. Yes Password The password for the user. Yes Domain The domain to use for NTLM. No Realm The realm to use for NTLM. No The Realm only applies to the HttpClient sampler. In JMeter 2.2, the domain and realm did not have separate columns, and were encoded as part of the user name in the form: [domain\]username[@realm]. This was an experimental feature and has been removed. Controls: Add Button - Add an entry to the authorization table. Delete Button - Delete the currently selected table entry. Load Button - Load a previously saved authorization table and add the entries to the existing authorization table entries. Save As Button - Save the current authorization table to a file. When you save the Test Plan, JMeter automatically saves all of the authorization table entries - including any passwords, which are not encrypted. Authorization Example Download this example. In this example, we created a Test Plan on a local server that sends three HTTP requests, two requiring a login and the other is open to everyone. See figure 10 to see the makeup of our Test Plan. On our server, we have a restricted directory named, "secret", which contains two files, "index.html" and "index2.html". We created a login id named, "kevin", which has a password of "spot". So, in our Authorization Manager, we created an entry for the restricted directory and a username and password (see figure 11). The two HTTP requests named "SecretPage1" and "SecretPage2" make requests to "/secret/index.html" and "/secret/index2.html". The other HTTP request, named "NoSecretPage" makes a request to "/index.html". Figure 10 - Test Plan Figure 11 - Authorization Manager Control Panel When we run the Test Plan, JMeter looks in the Authorization table for the URL it is requesting. If the Base URL matches the URL, then JMeter passes this information along with the request. You can download the Test Plan, but since it is built as a test for our local server, you will not be able to run it. However, you can use it as a reference in constructing your own Test Plan.

---

18.4.4 HTTP Cookie Manager

If there is more than one Cookie Manager in the scope of a Sampler, there is currently no way to specify which one is to be used. The Cookie Manager element has two functions: First, it stores and sends cookies just like a web browser. If you have an HTTP Request and the response contains a cookie, the Cookie Manager automatically stores that cookie and will use it for all future requests to that particular web site. Each JMeter thread has its own "cookie storage area". So, if you are testing a web site that uses a cookie for storing session information, each JMeter thread will have its own session. Received Cookies are stored as JMeter thread variables. Thus the value of a cookie with the name TEST can be referred to as ${TEST} Second, you can manually add a cookie to the Cookie Manager. However, if you do this, the cookie will be shared by all JMeter threads. Note that such Cookies are created with an Expiration time far in the future Since version 2.0.3, cookies with null values are ignored by default. This can be changed by setting the JMeter property: CookieManager.delete_null_cookies=false. Note that this also applies to manually defined cookies - any such cookies will be removed from the display when it is updated. Note also that the cookie name must be unique - if a second cookie is defined with the same name, it will replace the first. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Clear Cookies each Iteration If selected, all cookies are cleared each time the main Thread Group loop is executed. This includes all the Cookies stored in the manager, so they will never be sent. Yes Cookie Policy The cookie policy that will be used to manage the cookies. "compatibility" is the default, and should work in most cases. See http://jakarta.apache.org/httpcomponents/httpclient-3.x/cookies.html and http://jakarta.apache.org/httpcomponents/httpclient-3.x/apidocs/org/apache/commons/httpclient/cookie/CookiePolicy.html [Note: "ignoreCookies" is equivalent to omitting the CookieManager.] Yes Cookies Stored in the Cookie Manager This gives you the opportunity to use hardcoded cookies that will be used by all threads during the test execution. The "domain" is the hostname of the server (without http://); the port is currently ignored. No (discouraged, unless you know what you're doing) Add Button Add an entry to the cookie table. N/A Delete Button Delete the currently selected table entry. N/A Load Button Load a previously saved cookie table and add the entries to the existing cookie table entries. N/A Save As Button Save the current cookie table to a file (does not save any cookies extracted from HTTP Responses). N/A

---

18.4.5 HTTP Proxy Server

The Proxy Server can only record HTTP traffic. It is not possible to record HTTPS (SSL) sessions; however there is an HTTPS spoofing mode - see below. The Proxy Server allows JMeter to watch and record your actions while you browse your web application with your normal browser (such as Internet Explorer). JMeter will create test sample objects and store them directly into your test plan as you go (so you can view samples interactively while you make them). To use the proxy server, add the HTTP Proxy Server element to the workbench. Select the WorkBench element in the tree, and right-click on this element to get the Add menu (Add --> Non-Test Elements --> HTTP Proxy Server). Control Panel Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree. No Port The port that the Proxy Server listens to. 8080 is the default, but you can change it. Yes Capture HTTP Headers Should headers be added to the plan? Yes Set Keep-Alive Automatically set Keep-Alive in the generated samplers? Yes Add Assertions Add a blank assertion to each sampler? Yes Regex Matching Use Regex Matching when replacing variables? Yes Attempt https Spoofing When you enable https spoofing, the following happens: All http requests from the client are turned into https (between the proxy and the web server). All text response data is scanned and any occurrence of the string "https" is replaced with "http." So if you want to use this feature, while you are browsing in your client, instead of typing "https://..." into the browser, type "http://...". JMeter will request and record everything as https, whether it should be or not. Yes Target Controller The controller where the proxy will store the generated samples. By default, it will look for a Recording Controller and store them there wherever it is. Yes Grouping Whether to group samplers for requests from a single "click" (requests received without significant time separation), and how to represent that grouping in the recording: Do not group samplers: store all recorded samplers sequentially, without any grouping. Add separators between groups: add a controller named "--------------" to create a visual separation between the groups. Otherwise the samplers are all stored sequentially. Put each group in a new controller: create a new Simple Controller for each group, and store all samplers for that group in it. Store 1st sampler of each group only: only the first request in each group will be recorded. The "Follow Redirects" and "Retrieve All Embedded Resources..." flags will be turned on in those samplers. The property proxy.pause determines the minimum gap that JMeter needs between requests to treat them as separate "clicks". The default is 1000 (milliseconds) i.e. 1 second. If you are using grouping, pleas ensure that you leave the required gap between clicks. Yes Patterns to Include Regular expressions that are matched against the full URL that is sampled. Allows filtering of requests that are recorded. All requests pass through, but only those that meet the requirements of the Include/Exclude fields are recorded . If both Include and Exclude are left empty, then everything is recorded (which can result in dozens of samples recorded for each page, as images, stylesheets, etc are recorded). If there is at least one entry in the Include field, then only requests that match one or more Include patterns are recorded . No Patterns to Exclude Regular expressions that are matched against the URL that is sampled. Any requests that match one or more Exclude pattern are not recorded . No Start Button Start the proxy server. JMeter writes the following message to the console once the proxy server has started up and is ready to take requests: "Proxy up and running!". N/A Stop Button Stop the proxy server. N/A Restart Button Stops and restarts the proxy server. This is useful when you change/add/delete an include/exclude filter expression. N/A To add an entry to the Include or Exclude field, type the entry into the text field, and hit "Enter" when done. The text will be added to the List box to the right of the text field. To clear the text field, hit the "clear" button. Currently, there is no way to individually select items and delete them. These entries will be treated as Perl-type regular expressions. They will be matched against the host name + the path of each browser request. Thus, if the URL you are browsing is http://jakarta.apache.org/jmeter/index.html?username=xxxx , then the regular expression will be tested against the string: "jakarta.apache.org/jmeter/index.html" . Thus, if you wanted to include all .html files, you're regular expression might look like: ".*\.html" . Using a combination of includes and excludes, you should be able to record what you are interested in and skip what you are not. N.B. the string that is matched by the regular expression must be the same as the whole host+path string. Thus "\.html" will not match j.a.o/index.html It is also possible to have the proxy add timers to the recorded script. To do this, create a timer directly within the HTTP Proxy Server component. The proxy will place a copy of this timer into each sample it records, or into the first sample of each group if you're using grouping. This copy will then be scanned for occurences of variable ${T} in its properties, and any such occurences will be replaced by the time gap from the previous sampler recorded (in milliseconds). When you are ready to begin, hit "start". You will need to edit the proxy settings of your browser to point at the appropriate server and port, where the server is the machine JMeter is running on, and the port # is from the Proxy Control Panel shown above. Where Do Samples Get Recorded? JMeter places the recorded samples in the Target Controller you choose. If you choose the default option "Use Recording Controller", they will be stored in the first Recording Controller found in the test object tree (so be sure to add a Recording Controller before you start recording). If the HTTP Proxy Server finds enabled HTTP Request Defaults directly within the controller where samples are being stored, or directly within any of its parent controllers, the recorded samples will have empty fields for the default values you specified. You may further control this behaviour by placing an HTTP Request Defaults element directly within the HTTP Proxy Server, whose non-blank values will override those in the other HTTP Request Defaults. See Best Practices with the Proxy Server for more info. Similarly, if the HTTP Proxy Server finds User Defined Variables (UDV) directly within the controller where samples are being stored, or directly within any of its parent controllers, the recorded samples will have any occurences of the values of those variables replaced by the corresponding variable. Again, you can place User Defined Variables directly within the HTTP Proxy Server to override the values to be replaced. See Best Practices with the Proxy Server for more info. Replacement by Variables: by default, the Proxy server looks for all occurences of UDV values. If you define the variable "WEB" with the value "www", for example, the string "www" will be replaced by ${WEB} wherever it is found. To avoid this happening everywhere, set the "Regex Matching" check-box. This tells the proxy server to treat values as Regexes (using ORO). If you want to match a whole string only, enclose it in ^$, e.g. "^thus$". If you want to match /images at the start of a string only, use the value "^/images". Jakarta ORO also supports zero-width look-ahead, so one can match /images/... but retain the trailing / in the output by using "^/images(?=/)". Note that the current version of Jakara ORO does not support look-behind - i.e. "(?<=...) or (?<!...)". If there are any problems interpreting any variables as patterns, these are reported in jmeter.log, so be sure to check this if UDVs are not working as expected. When you are done recording your test samples, stop the proxy server (hit the "stop" button). Remember to reset your browser's proxy settings. Now, you may want to sort and re-order the test script, add timers, listeners, a cookie manager, etc. How can I record the server's responses too? Just place a View Results Tree listener as a child of the Proxy Server and the responses will be displayed. You can also add a Save Responses to a file Post-Processor which will save the responses to files.

---

18.4.6 HTTP Request Defaults

This element lets you set default values that your HTTP Request controllers use. For example, if you are creating a Test Plan with 25 HTTP Request controllers and all of the requests are being sent to the same server, you could add a single HTTP Request Defaults element with the "Server Name or IP" field filled in. Then, when you add the 25 HTTP Request controllers, leave the "Server Name or IP" field empty. The controllers will inherit this field value from the HTTP Request Defaults element. In JMeter 2.2 and earlier, port 80 was treated specially - it was ignored if the sampler used the https protocol. JMeter 2.3 and later treat all port values equally; a sampler that does not specify a port will use the HTTP Request Defaults port, if one is provided. Control Panel Parameters Attribute Description Required Name Descriptive name for this controller that is shown in the tree. No Server Domain name or IP address of the web server. No Port Port the web server is listening to. No Protocol HTTP or HTTPS. Yes Method HTTP GET or HTTP POST. No Path The path to resource (for example, /servlets/myServlet). If the resource requires query string parameters, add them below in the "Send Parameters With the Request" section. No Send Parameters With the Request The query string will be generated from the list of parameters you provide. Each parameter has a name and value . The query string will be generated in the correct fashion, depending on the choice of "Method" you made (ie if you chose GET, the query string will be appended to the URL, if POST, then it will be sent separately). Also, if you are sending a file using a multipart form, the query string will be created using the multipart form specifications. No

---

18.4.7 HTTP Header Manager

If there is more than one Header Manager in the scope of a Sampler, there is currently no way to sepcify which one is to be used. The Header Manager lets you add or override HTTP request headers. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Name (Header) Name of the request header. Two common request headers you may want to experiment with are "User-Agent" and "Referer". No (You should have at least one, however) Value Request header value. No (You should have at least one, however) Add Button Add an entry to the header table. N/A Delete Button Delete the currently selected table entry. N/A Load Button Load a previously saved header table and add the entries to the existing header table entries. N/A Save As Button Save the current header table to a file. N/A Header Manager example Download this example. In this example, we created a Test Plan that tells JMeter to override the default "User-Agent" request header and use a particular Internet Explorer agent string instead. (see figures 9 and 10). Figure 12 - Test Plan Figure 13 - Header Manager Control Panel

---

18.4.8 Java Request Defaults

The Java Request Defaults component lets you set default values for Java testing. See the Java Request . Control Panel

---

18.4.9 JDBC Connection Configuration

Creates a database connection pool (used by JDBC Request Sampler) with JDBC Connection settings. Control Panel Parameters Attribute Description Required Name Descriptive name for the connection pool that is shown in the tree. No Variable Name The name of the variable the connection pool is tied to. Multiple connection pools can be used, each tied to a different variable, allowing JDBC Samplers to select the pool to draw connections from. Yes Max Number of Connections Maximum number of connections allowed in the pool Yes Pool timeout Pool throws an error if the timeout period is exceeded in the process of trying to retrieve a connection Yes Idle Cleanup Interval (ms) Uncertain what exactly this does. Yes Auto Commit Turn auto commit on or off for the connections. Yes Keep-alive Uncertain what exactly this does. Yes Max Connection Age (ms) Uncertain what exactly this does. Yes Validation Query A simple query used to determine if the database is still responding. Yes Database URL JDBC Connection string for the database. Yes JDBC Driver class Fully qualified name of driver class. (Must be in JMeter's classpath - easiest to copy .jar file into JMeter's /lib directory). Yes Username Name of user to connect as. No Password Password to connect with. No Different databases and JDBC drivers require different JDBC settings. The Database URL and JDBC Driver class are defined by the provider of the JDBC implementation. Some possible settings are shown below. Please check the exact details in the JDBC driver documentation. Database Driver class Database URL MySQL com.mysql.jdbc.Driver jdbc:mysql://host[:port]/dbname PostgreSQL org.postgresql.Driver jdbc:postgresql:{dbname} Oracle oracle.jdbc.driver.OracleDriver jdbc:oracle:thin:user/pass@//host:port/service Ingres (2006) ingres.jdbc.IngresDriver jdbc:ingres://host:port/db[;attr=value] SQL Server (MS JDBC driver) com.microsoft.sqlserver.jdbc.SQLServerDriver jdbc:sqlserver://host:port;DatabaseName=dbname Apache Derby org.apache.derby.jdbc.ClientDriver jdbc:derby://server[:port]/databaseName[;URLAttributes=value[;...]] The above may not be correct - please check the relevant JDBC driver documentation.

---

18.4.11 Login Config Element

The Login Config Element lets you add or override username and password settings in samplers that use username and password as part of their setup. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Username The default username to use. No Password The default password to use. No

---

18.4.12 LDAP Request Defaults

The LDAP Request Defaults component lets you set default values for LDAP testing. See the LDAP Request . Control Panel

---

18.4.13 LDAP Extended Request Defaults

The LDAP Extended Request Defaults component lets you set default values for extended LDAP testing. See the LDAP Extended Request . Control Panel

---

18.4.14 TCP Sampler Config

ALPHA CODE The TCP Sampler Config provides default data for the TCP Sampler Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No ServerName or IP Name or IP of TCP server No Port Number Port to be used No Timeout (milliseconds) Timeout for replies No Set Nodelay Should the nodelay property be set? No Text to Send Text to be sent No

---

18.4.15 User Defined Variables

The User Defined Variables lets you define variables for use in other test elements, just as in the Test Plan . The variables in User Defined Variables components will take precedence over those defined closer to the tree root -- including those defined in the Test Plan. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No User Defined Variables Variable name/value pairs. The string under the "Name" column is what you'll need to place inside the brackets in ${...} constructs to use the variables later on. The whole ${...} will then be replaced by the string in the "Value" column. No If you have more than one Thread Group, make sure you use different names for different values, as UDVs are shared between Thread Groups.

---

18.4.16 Simple Config Element

The Simple Config Element lets you add or override arbitrary values in samplers. You can choose the name of the value and the value itself. Although some adventurous users might find a use for this element, it's here primarily for developers as a basic GUI that they can use while developing new JMeter components. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Parameter Name The name of each parameter. These values are internal to JMeter's workings and are not generally documented. Only those familiar with the code will know these values. Yes Parameter Value The value to apply to that parameter. Yes

---

^

Assertions are used to perform additional checks on samplers, and are processed after each sampler in the same scope.

The variable JMeterThread.last_sample_ok is set to "true" or "false" after all assertions for a sampler have been run.

18.5.1 Response Assertion

The response assertion control panel lets you add pattern strings to be compared against various fields of the response. The pattern strings are Perl5-style regular expressions. A summary of the pattern matching characters can be found at http://jakarta.apache.org/oro/api/org/apache/oro/text/regex/package-summary.html You can also choose whether the strings will be expected to match the entire response, or if the response is only expected to contain the pattern. You can attach multiple assertions to any controller for additional flexibility. Note that the pattern string should not include the enclosing delimiters, i.e. use Price: \d+ not /Price: \d+/ . By default, the pattern is in multi-line mode, which means that the "." meta-character does not match newline. In multi-line mode, "^" and "$" match the start or end of any line anywhere within the string - not just the start and end of the entire string. Note that \s does match new-line. Case is also significant. To override these settings, one can use the extended regular expression syntax. For example: (?i) - ignore case (?s) - treat target as single line, i.e. "." matches new-line (?is) - both the above These can be used anywhere within the expression, e.g. (?i)apple(?-i) Pie - matches "ApPLe Pie", but not "ApPLe pIe" Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Response Field to Test Instructs JMeter which field of the Response to test. This may be the Response Text from the server, the URL string that was sampled, the Response Headers (JMeter version 2.3RC3 and earlier included the headers with the Text), the Response Code (e.g. 404) or the Response Message (e.g. Not Found). The overall success of the sample is determined by combining the result of the assertion with the existing Response status. When the Ignore Status checkbox is selected, the Response status is forced to successful before evaluating the Assertion. HTTP Responses with statuses in the 4xx and 5xx ranges are normally regarded as unsuccessful. The "Ignore status" checkbox can be used to set the status successful before performing further checks. Note that this will have the effect of clearing any previous assertion failures, so make sure that this is only set on the first assertion. Yes Pattern Matching Rules Indicates whether the text being tested must CONTAIN or MATCH the test patterns. NOT may also be selected to indicate the text should NOT CONTAIN or NOT MATCH the test patterns. Yes Patterns to Test A list of regular expressions to be tested. Each pattern is tested separately. There is no difference between setting up one Assertion with multiple patterns and setting up multiple Assertions with one pattern each (assuming the other options are the same). However, when the Ignore Status checkbox is selected, this has the effect of cancelling any previous assertion failures - so make sure that the Ignore Status checkbox is only used on the first Assertion. Yes The pattern is a Perl5-style regular expression, but without the enclosing brackets. Assertion Examples Figure 14 - Test Plan Figure 15 - Assertion Control Panel with Pattern Figure 16 - Assertion Listener Results (Pass) Figure 17 - Assertion Listener Results (Fail)

---

18.5.2 Duration Assertion

The Duration Assertion tests that each response was received within a given amount of time. Any response that takes longer than the given number of milliseconds (specified by the user) is marked as a failed response. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Duration in Milliseconds The maximum number of milliseconds each response is allowed before being marked as failed. Yes

---

18.5.3 Size Assertion

The Size Assertion tests that each response contains the right number of bytes in it. You can specify that the size be equal to, greater than, less than, or not equal to a given number of bytes. Since JMeter 2.3RC3, an empty response is treated as being 0 bytes rather than reported as an error. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Size in bytes The number of bytes to use in testing the size of the response. Yes Type of Comparison Whether to test that the response is equal to, greater than, less than, or not equal to, the number of bytes specified. Yes

---

18.5.4 XML Assertion

The XML Assertion tests that the response data consists of a formally correct XML document. It does not validate the XML based on a DTD or schema or do any further validation. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No

---

18.5.5 BeanShell Assertion

The BeanShell Assertion allows the user to perform assertion checking using a BeanShell script. Please note that the BeanShell jar file is not included with JMeter; it needs to be downloaded separately and placed in the lib directory. For full details on using BeanShell, please see the BeanShell web-site at http://www.beanshell.org/. Note that a different Interpreter is used for each independent occurence of the assertion in each thread in a test script, but the same Interpreter is used for subsequent invocations. This means that variables persist across calls to the assertion. All Assertions are called from the same thread as the sampler. If the property "beanshell.assertion.init" is defined, it is passed to the Interpreter as the name of a sourced file. This can be used to define common methods and variables. There is a sample init file in the bin directory: BeanShellAssertion.bshrc The test element supports the ThreadListener and TestListener methods. These should be defined in the initialisation file. See the file BeanShellListeners.bshrc for example definitions. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Parameters Parameters to pass to the BeanShell script. The parameters are stored in the following variables: Parameters - string containing the parameters as a single variable bsh.args - String array containing parameters, split on white-space No Script file A file containing the BeanShell script to run No Script The BeanShell script to run No There's a sample script you can try. The following variables are defined to the script. These are strings unless otherwise noted: log - the Logger Object. (e.g.) log.warn("Message"[,Throwable]) SampleResult - the SampleResult Object; read-write Response - the response Object; read-write Failure - boolean; read-write; used to set the Assertion status FailureMessage - String; read-write; used to set the Assertion message ResponseData - the response body (byte []) ResponseCode - e.g. 200 ResponseMessage - e.g. OK ResponseHeaders - contains the HTTP headers RequestHeaders - contains the HTTP headers sent to the server SampleLabel SamplerData - data that was sent to the server ctx - JMeterContext vars - JMeterVariables - e.g. vars.get("VAR1"); vars.put("VAR2","value"); vars.putObject("OBJ1",new Object()); The following methods of the Response object may be useful: setStopThread(boolean) setStopTest(boolean) String getSampleLabel() setSampleLabel(String)

---

18.5.6 MD5Hex Assertion

The MD5Hex Assertion allows the user to check the MD5 hash of the response data. Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No MD5 sum 32 hex digits representing the MD5 hash (case not significant) Yes

---

18.5.7 HTML Assertion

The HTML Assertion allows the user to check the HTML syntax of the response data using JTidy. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No doctype omit/auto/strict/loose Yes Format HTML, XHTML or XML Yes Errors only Only take note of errors? Yes Error threshold Number of errors allowed before classing the response as failed Yes Warning threshold Number of warnings allowed before classing the response as failed Yes Filename Name of file to which report is written No

---

18.5.8 XPath Assertion

The XPath Assertion tests a document for well formedness, has the option of validating against a DTD, or putting the document through JTidy and testing for an XPath. If that XPath exists, the Assertion is true. Using "/" will match any well-formed document, and is the default XPath Expression. The assertion also supports boolean expressions, such as "count(//*error)=2". See http://www.w3.org/TR/xpath for more information on XPath. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Tolerant Parser Be tolerant of XML/HTML errors No Use Namespaces Should namespaces be honoured? No Validate XML Check the document against its schema. No XPath Assertion XPath to match in the document. Yes Ignore Whitespace Ignore Element Whitespace. No True if nothing matches True if a XPath expression is not matched No

---

18.5.9 XML Schema Assertion

The XML Schema Assertion allows the user to validate a response against an XML Schema. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No File Name Specify XML Schema File Name Yes

---

^

Note that timers are processed before each sampler in the scope in which they are found; if there are several timers in the same scope, all the timers will be processed before each sampler.

Timers are only processed in conjunction with a sampler. A timer which is not in the same scope as a sampler will not be processed at all.

To apply a timer to a single sampler, add the timer as a child element of the sampler. The timer will be applied before the sampler is executed. To apply a timer after a sampler, either add it to the next sampler, or add it as the child of a Test Action Sampler.

18.6.1 Constant Timer

If you want to have each thread pause for the same amount of time between requests, use this timer. Control Panel Parameters Attribute Description Required Name Descriptive name for this timer that is shown in the tree. No Thread Delay Number of milliseconds to pause. Yes

---

18.6.2 Gaussian Random Timer

This timer pauses each thread request for a random amount of time, with most of the time intervals ocurring near a particular value. The total delay is the sum of the Gaussian distributed value (with mean 0.0 and standard deviation 1.0) times the deviation value you specify, and the offset value. Control Panel Parameters Attribute Description Required Name Descriptive name for this timer that is shown in the tree No Deviation Deviation in milliseconds. Yes Constant Delay Offset Number of milliseconds to pause in addition to the random delay. Yes

---

18.6.3 Uniform Random Timer

This timer pauses each thread request for a random amount of time, with each time interval having the same probability of occurring. The total delay is the sum of the random value and the offset value. Control Panel Parameters Attribute Description Required Name Descriptive name for this timer that is shown in the tree. No Random Delay Maximum Maxium random number of milliseconds to pause. Yes Constant Delay Offset Number of milliseconds to pause in addition to the random delay. Yes

---

18.6.4 Constant Throughput Timer

This timer introduces variable pauses, calculated to keep the total throughput (in terms of samples per minute) as close as possible to a give figure. Of course the throughput will be lower if the server is not capable of handling it, or if other timers or time-consuming test elements prevent it. N.B. although the Timer is called the Constant Throughput timer, the throughput value does not need to be constant. It can be defined in terms of a variable or function call, and the value can be changed during a test. The value can be changed in various ways: using a counter variable using a JavaScript or BeanShell function to provide a changing value using the remote BeanShell server to change a JMeter property See Best Practices for further details. Note that the throughput value should not be changed too often during a test - it will take a while for the new value to take effect. Control Panel Parameters Attribute Description Required Name Descriptive name for this timer that is shown in the tree. No Target Throughput Throughput we want the timer to try to generate. Yes Calculate Throughput based on this thread only - each thread will try to maintain the target throughput. The overall throughput will be proportional to the number of active threads. all active threads in current thread group - the target throughput is divided amongst all the active threads in the group. Each thread will delay as needed, based on when it last ran. all active threads - the target throughput is divided amongst all the active threads in all Thread Groups. Each thread will delay as needed, based on when it last ran. In this case, each other Thread Group will need a Constant Throughput timer with the same settings. all active threads in current thread group (shared) - as above, but each thread is delayed based on when any thread in the group last ran. all active threads (shared) - as above; each thread is delayed based on when any thread last ran. Yes

---

18.6.5 Synchronizing Timer

The purpose of the SyncTimer is to block threads until X number of threads have been blocked, and then they are all released at once. A SyncTimer can thus create large instant loads at various points of the test plan. Control Panel Parameters Attribute Description Required Name Descriptive name for this timer that is shown in the tree. No Number of Simultaneous Users to Group by Number of threads to release at once. Yes

---

18.6.6 BeanShell Timer

The BeanShell Timer can be used to generate a delay. Please note that the BeanShell jar file is not included with JMeter; it needs to be separately downloaded. For full details on using BeanShell, please see the BeanShell web-site at http://www.beanshell.org/. The test element supports the ThreadListener and TestListener methods. These should be defined in the initialisation file. See the file BeanShellListeners.bshrc for example definitions. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Script The BeanShell script. The return value is used as the number of milliseconds to wait. Yes log - (Logger) - can be used to write to the log file ctx - (JMeterContext) - gives access to the context vars - (JMeterVariables) - gives read/write access to variables: vars.get(key); vars.put(key,val); vars.putObject("OBJ1",new Object()); For details of all the methods available on each of the above variables, please check the Javadoc If the property beanshell.timer.init is defined, this is used to load an initialisation file, which can be used to define methods etc for use in the BeanShell script.

---

^

Preprocessors are used to modify the Samplers in their scope.

18.7.1 HTML Link Parser

This modifier parses HTML response from the server and extracts links and forms. A URL test sample that passes through this modifier will be examined to see if it "matches" any of the links or forms extracted from the immediately previous response. It would then replace the values in the URL test sample with appropriate values from the matching link or form. Perl-type regular expressions are used to find matches. Matches are performed using protocol, host, path and parameter names. The target sampler cannot contain parameters that are not in the response links. Spidering Example Consider a simple example: let's say you wanted JMeter to "spider" through your site, hitting link after link parsed from the HTML returned from your server (this is not actually the most useful thing to do, but it serves as a good example). You would create a Simple Controller , and add the "HTML Link Parser" to it. Then, create an HTTP Request, and set the domain to ".*", and the path likewise. This will cause your test sample to match with any link found on the returned pages. If you wanted to restrict the spidering to a particular domain, then change the domain value to the one you want. Then, only links to that domain will be followed. Poll Example A more useful example: given a web polling application, you might have a page with several poll options as radio buttons for the user to select. Let's say the values of the poll options are very dynamic - maybe user generated. If you wanted JMeter to test the poll, you could either create test samples with hardcoded values chosen, or you could let the HTML Link Parser parse the form, and insert a random poll option into your URL test sample. To do this, follow the above example, except, when configuring your Web Test controller's URL options, be sure to choose "POST" as the method. Put in hard-coded values for the domain, path, and any additional form parameters. Then, for the actual radio button parameter, put in the name (let's say it's called "poll_choice"), and then ".*" for the value of that parameter. When the modifier examines this URL test sample, it will find that it "matches" the poll form (and it shouldn't match any other form, given that you've specified all the other aspects of the URL test sample), and it will replace your form parameters with the matching parameters from the form. Since the regular expression ".*" will match with anything, the modifier will probably have a list of radio buttons to choose from. It will choose at random, and replace the value in your URL test sample. Each time through the test, a new random value will be chosen. Figure 18 - Online Poll Example One important thing to remember is that you must create a test sample immediately prior that will return an HTML page with the links and forms that are relevant to your dynamic test sample.

---

18.7.2 HTTP URL Re-writing Modifier

This modifier works similarly to the HTML Link Parser, except it has a specific purpose for which it is easier to use than the HTML Link Parser, and more efficient. For web applications that use URL Re-writing to store session ids instead of cookies, this element can be attached at the ThreadGroup level, much like the HTTP Cookie Manager . Simply give it the name of the session id parameter, and it will find it on the page and add the argument to every request of that ThreadGroup. Alternatively, this modifier can be attached to select requests and it will modify only them. Clever users will even determine that this modifier can be used to grab values that elude the HTML Link Parser . Control Panel Parameters Attribute Description Required Name Descriptive name given to this element in the test tree. No Session Argument Name The name of the parameter to grab from previous response. This modifier will find the parameter anywhere it exists on the page, and grab the value assigned to it, whether it's in an HREF or a form. Yes Path Extension Some web apps rewrite URLs by appending a semi-colon plus the session id parameter. Check this box if that is so. No Do not use equals in path extension Some web apps rewrite URLs without using an "=" sign between the parameter name and value (such as Intershop Enfinity). No Do not use questionmark in path extension Prevents the query string to end up in the path extension (such as Intershop Enfinity). No Cache Session Id? Should the value of the session Id be saved for later use when the session Id is not present? Yes

---

18.7.3 HTML Parameter Mask

* - This element is deprecated. Use Counter instead

The HTML Parameter Mask is used to generate unique values for HTML arguments. By specifying the name of the parameter, a value prefix and suffix, and counter parameters, this modifier will generate values of the form " name=prefixcountersuffix ". Any HTTP Request that it modifies, it will replace any parameter with the same name or add the appropriate parameter to the requests list of arguments. The value of the argument in your HTTP Request must be a '*' in order for the HTML Parameter Mask Modifier to replace it. As an example, the username for a login script could be modified to send a series of values such as: user_1 user_2 user_3 user_4, etc. Control Panel Parameters Attribute Description Required Name Descriptive name given to this element in the test tree. No Name (second appearing) The name of the parameter to modify or add to the HTTP Request. Yes ID Prefix A string value to prefix to every generated value. No Lower Bound A number value to start the counter at. Yes Upper Bound A number value to end the counter, at which point it restarts with the Lower Bound value. Yes Increment Value to increment the counter by each time through. Yes ID Suffix A string value to add as suffix to every generated vaue. No

---

18.7.4 HTTP User Parameter Modifier

* - This element is deprecated. Use User Parameters instead

See also the CSV Data Set Config element, which is more suitable for large numbers of parameters The User Parameter Modifier uses an XML file get values for HTTP arguments. Any HTTP Request that this modifier modifies will be checked for the existence of the specified arguments. If found, the values for those arguments will be replaced by the values found in the xml file. The XML file can have multiple sets of the same values. This modifier will iterate through these values in a round-robin style, thus each request will get a different set of values until the last set of values is reached, at which point it will begin again at the first set. Control Panel Parameters Attribute Description Required Name Descriptive name given to this element in the test tree. No File Name Name of the XML file in JMeter's /bin directory that holds the value sets. Yes

---

18.7.5 User Parameters

Allows the user to specify values for User Variables specific to individual threads. User Variables can also be specified in the Test Plan but not specific to individual threads. This panel allows you to specify a series of values for any User Variable. For each thread, the variable will be assigned one of the values from the series in sequence. If there are more threads than values, the values get re-used. For example, this can be used to assign a distinct user id to be used by each thread. User variables can be referenced in any field of any jMeter Component. The variable is specified by clicking the Add Variable button in the bottom of the panel and filling in the Variable name in the 'Name:' column. To add a new value to the series, click the 'Add User' button and fill in the desired value in the newly added column. Values can be accessed in any test component in the same thread group, using the function syntax : ${variable}. See also the CSV Data Set Config element, which is more suitable for large numbers of parameters Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Update Once Per Iteration A flag to indicate whether the User Paramters element should update its variables only once per iteration. if you embed functions into the UP, then you may need greater control over how often the values of the variables are updated. Keep this box checked to ensure the values are updated each time through the UP's parent controller. Uncheck the box, and the UP will update the parameters for every sample request made within its scope . Yes

---

18.7.6 Counter

Allows the user to create a counter that can be referenced anywhere in the Thread Group. The counter config lets the user configure a starting point, a maximum, and the increment. The counter will loop from the start to the max, and then start over with the start, continuing on like that until the test is ended. From version 2.1.2, the counter now uses a long to store the value, so the range is from -2^63 to 2^63-1. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Start The starting number for the counter. The counter will equal this number during the first iteration. Yes Increment How much to increment the counter by after each iteration. Yes Maximum If the counter exceeds the maximum, then it is reset to the Start value. For versions after 2.2 the default is Long.MAX_VALUE (previously it was 0). No Format Optional format, e.g. 000 will format as 001, 002 etc. This is passed to DecimalFormat, so any valid formats can be used. If there is a problem interpreting the format, then it is ignored. [The default format is generated using Long.toString()] No Reference Name This controls how you refer to this value in other elements. Syntax is as in user-defined values : $(reference_name} . Yes Track Counter Independently for each User In other words, is this a global counter, or does each user get their own counter? If unchecked, the counter is global (ie, user #1 will get value "1", and user #2 will get value "2" on the first iteration). If checked, each user has an independent counter. No

---

18.7.7 BeanShell PreProcessor

The BeanShell PreProcessor allows arbitrary code to be applied before taking a sample. For versions after 2.2 the BeanShell Post-Processor no longer ignores samples with zero-length result data Please note that the BeanShell jar file is not included with JMeter; it needs to be separately downloaded. For full details on using BeanShell, please see the BeanShell web-site at http://www.beanshell.org/. The test element supports the ThreadListener and TestListener methods. These should be defined in the initialisation file. See the file BeanShellListeners.bshrc for example definitions. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Script The BeanShell script. The return value is ignored. See below for variables defined to the script. Yes log - (Logger) - can be used to write to the log file ctx - (JMeterContext) - gives access to the context vars - (JMeterVariables) - gives read/write access to variables: vars.get(key); vars.put(key,val); vars.putObject("OBJ1",new Object()); prev - (SampleResult) - gives access to the previous SampleResult (if any) sampler - (Sampler)- gives access to the current sampler For details of all the methods available on each of the above variables, please check the Javadoc If the property beanshell.preprocessor.init is defined, this is used to load an initialisation file, which can be used to define methods etc for use in the BeanShell script.

---

^

As the name suggests, Post-Processors are applied after samplers. Note that they are applied to all the samplers in the same scope, so to ensure that a post-processor is applied only to a particular sampler, add it as a child of the sampler.

18.8.1 Regular Expression Extractor

Allows the user to extract values from a server response using a Perl-type regular expression. As a post-processor, this element will execute after each Sample request in its scope , applying the regular expression, extracting the requested values, generate the template string, and store the result into the given variable name. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Response Field to check Body or Headers. These refer to the Sampler Response. Headers can be useful for HTTP samples; it may not be present for other sample types. yes Reference Name The name of the JMeter variable in which to store the result. Also note that each group is stored as [refname]_g#, where [refname] is the string you entered as the reference name, and # is the group number, where group 0 is the entire match, group 1 is the match from the first set of parentheses, etc. Yes Regular Expression The regular expression used to parse the response data. This must contain at least one set of parentheses "()" to capture a portion of the string, unless using the group $0$. Do not enclose the expression in / / - unless of course you want to match these characters as well. Yes Template The template used to create a string from the matches found. This is an arbitrary string with special elements to refer to groups within the regular expression. The syntax to refer to a group is: '$1$' to refer to group 1, '$2$' to refer to group 2, etc. $0$ refers to whatever the entire expression matches. Yes Match No. Indicates which match to use. The regular expression may match multiple times. Use a value of zero to indicate JMeter should choose a match at random. A positive number N means to select the nth match. Negative numbers are used in conjunction with the ForEach controller - see below. Yes Default Value If no matches are found - and a default is provided - the default value is stored in the variable. No If the match number is set to a non-negative number, and a match occurs, the variables are set as follows: refName - the value of the template refName_gn, where n=0,1,2 - the groups for the match refName_g - the number of groups in the Regex (excluding 0) If no match occurs, then the refName variable is set to the default (unless this is absent). Also, the following variables are removed: refName_g0 refName_g1 refName_g If the match number is set to a negative number, then all the possible matches in the sampler data are processed. The variables are set as follows: refName_matchNr - the number of matches found; could be 0 refName_n, where n = 1,2,3 etc - the strings as generated by the template refName_n_gm, where m=0,1,2 - the groups for match n refName - always set to the default value refName_gn - not set Note that the refName variable is always set to the default value in this case, and the associated group variables are not set. See also further information on regular expressions.

---

18.8.2 XPath Extractor

This test element allows the user to extract value from structured response - XML or (X)HTML - using XPath query language. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Use Tidy If checked use Tidy to parse HTML response into XHTML. "Use Tidy" should be checked on for HTML response. Such response is converted to valid XHTML (XML compatible HTML) using Tidy "Use Tidy" should be unchecked for both XHTML or XML response (for example RSS) Yes Use Namespace? If checked, then the XML parser will use namespace resolution. Note that currently only namespaces declared on the root element will be recognised. A later version of JMeter may support user-definition of additional workspace names. Meanwhile, a work-round is to replace: //mynamespace:tagname by //*[local-name()='tagname' and namespace-uri()='uri-for-namespace'] where "uri-for-namespace" is the uri for the "mynamespace" namespace. (not applicable if Tidy is selected) Yes Reference Name The name of the JMeter variable in which to store the result. Yes XPath Query Element query in XPath language. Can return more than one match. Yes Default Value Default value returned when no match found No To allow for use in a ForEach Controller, the following variables are set on return: refName - set to first (or only) match; if no match, then set to default refName_matchNr - set to number of matches (may be 0) refName_n - n=1,2,3 etc. Set to the 1st, 2nd 3rd match etc. Note: The next refName_n variable is set to null - e.g. if there are 2 matches, then refName_3 is set to null, and if there are no matches, then refName_1 is set to null. XPath is query language targeted primarily for XSLT transformations. However it is usefull as generic query language for structured data too. See XPath Reference or XPath specification for more information. Here are few examples: /html/head/title extracts title element from HTML response /book/page[2] extracts 2nd page from a book /book/page extracts all pages from a book //form[@name='countryForm']//select[@name='country']/option[text()='Czech Republic'])/@value extracts value attribute of option element that match text 'Czech Republic' inside of select element with name attribute 'country' inside of form with name attribute 'countryForm' When "Use Tidy" is checked on - resulting XML document may slightly differ from original HTML response: All elements and attribute names are converted to lowercase Tidy attempts to correct improperly nested elements. For example - original (incorrect) ul/font/li becomes correct ul/li/font See Tidy homepage for more information.

---

18.8.3 Result Status Action Handler

This test element allows the user to stop the thread or the whole test if the relevant sampler failed. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No

---

18.8.4 Save Responses to a file

This test element can be placed anywhere in the test plan. For each sample in its scope, it will create a file of the response Data. The primary use for this is in creating functional tests. The file name is created from the specified prefix, plus a number. The file extension is created from the document type, if known. The generated file name is stored in the sample response, and can be saved in the test log output file if required. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Filename Prefix Prefix for the generated file names Yes Save Failed Responses only If selected, then only failed responses are saved Yes

---

18.8.5 Generate Summary Results

This test element can be placed anywhere in the test plan. Generates a summary of the test run so far to the log file and/or standard output. Both running and differential totals are shown. Output is generated every n seconds (default 3 minutes) on the appropriate time boundary, so that multiple test runs on the same time will be synchronised.The interval is defined by the property "summariser.interval" - see jmeter.properties. This is mainly intended for batch (non-GUI) runs. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No

---

18.8.6 BeanShell PostProcessor

The BeanShell PreProcessor allows arbitrary code to be applied after taking a sample. Please note that the BeanShell jar file is not included with JMeter; it needs to be separately downloaded. For full details on using BeanShell, please see the BeanShell web-site at http://www.beanshell.org/. The test element supports the ThreadListener and TestListener methods. These should be defined in the initialisation file. See the file BeanShellListeners.bshrc for example definitions. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Script The BeanShell script. The return value is ignored. See below for variables defined to the script. Yes log - (Logger) - can be used to write to the log file ctx - (JMeterContext) - gives access to the context vars - (JMeterVariables) - gives read/write access to variables: vars.get(key); vars.put(key,val); vars.putObject("OBJ1",new Object()); prev - (SampleResult) - gives access to the previous SampleResult data - (byte [])- gives access to the current sample data For details of all the methods available on each of the above variables, please check the Javadoc If the property beanshell.postprocessor.init is defined, this is used to load an initialisation file, which can be used to define methods etc for use in the BeanShell script.

---

^

18.9.1 Test Plan

At the Test Plan level, static variables can be defined that allow users to abstract values that are repeated throughout their tests, such as server names. Here, one can instruct JMeter to save the maximum sample information to file by selecting "functional testing". Also, an option exists here to instruct JMeter to run the Thread Group serially rather than in parallel. Test plan now provides an easy way to add classpath setting to a specific test plan. The feature is additive, meaning that you can add jar files or directories, but removing an entry requires restarting JMeter. In the past, users had to copy all the jar files to jmeter/lib/ directory. Now that is not necessary. JMeter properties also provides an entry for loading additional classpaths. In jmeter.properties, edit "user.classpath" to include additional libraries. Note that paths with spaces may cause problems for Java. Control Panel

---

18.9.2 Thread Group

A Thread Group defines a pool of users that will execute a particular test case against your server. In the Thread Group GUI, you can control the number of users simulated (num of threads), the ramp up time (how long it takes to start all the threads), the number of times to perform the test, and optionally, a start and stop time for the test. Control Panel Parameters Attribute Description Required Name Descriptive name for this element that is shown in the tree. No Number of Threads Number of users to simulate. Yes Ramp-up Period How long JMeter should take to get all the threads started. If there are 10 threads and a ramp-up time of 100 seconds, then each thread will begin 10 seconds after the previous thread started, for a total time of 100 seconds to get the test fully up to speed. Yes Loop Count Number of times to perform the test case. Alternatively, "forever" can be selected causing the test to run until manually stopped. No Start Time If the scheduler checkbox is selected, one can choose an absolute start time. When you start your test, JMeter will wait until the specified start time to begin testing. Note: the Startup Delay field over-rides this - see below. No End Time If the scheduler checkbox is selected, one can choose an absolute end time. When you start your test, JMeter will wait until the specified start time to begin testing, and it will stop at the specified end time. Note: the Duration field over-rides this - see below. No Duration (seconds) If the scheduler checkbox is selected, one can choose a relative end time. JMeter will use this to calculate the End Time, and ignore the End Time value. No Startup delay (seconds) If the scheduler checkbox is selected, one can choose a relative startup delay. JMeter will use this to calculate the Start Time, and ignore the Start Time value. No

---

18.9.3 WorkBench

The WorkBench simply provides a place to temporarily store test elements while not in use, for copy/paste purposes, or any other purpose you desire. When you save your test plan, WorkBench items are not saved with it. Your WorkBench can be saved independently, if you like (right-click on WorkBench and choose Save). Certain test elements are only available on the WorkBench: HTTP Proxy Server HTTP Mirror Server Control Panel

---

18.9.4 SSL Manager

The SSL Manager is a way to select a client certificate so that you can test applications that use Public Key Infrastructure (PKI). It is only needed if you have not set up the appropriate System properties. Choosing a Client Certificate You may either use a Java Key Store (JKS) format key store, or a Public Key Certificate Standard #12 (PKCS12) file for your client certificates. There is a feature of the JSSE libraries that require you to have at least a six character password on your key (at least for the keytool utility that comes with your JDK). To select the client certificate, choose Options->SSL Manager from the menu bar. You will be presented with a file finder that looks for PKCS12 files by default. Your PKCS12 file must have the extension '.p12' for SSL Manager to recognize it as a PKCS12 file. Any other file will be treated like an average JKS key store. If JSSE is correctly installed, you will be prompted for the password. The text box does not hide the characters you type at this point--so make sure no one is looking over your shoulder. The current implementation assumes that the password for the keystore is also the password for the private key of the client you want to authenticate as. Or you can set the appropriate System properties - see the system.properties file. The next time you run your test, the SSL Manager will examine your key store to see if it has at least one key available to it. If there is only one key, SSL Manager will select it for you. If there is more than one key, it currently selects the first key. There is currently no way to select other entries in the keystore, so the desired key must be the first. Things to Look Out For You must have your Certificate Authority (CA) certificate installed properly if it is not signed by one of the five CA certificates that ships with your JDK. One method to install it is to import your CA certificate into a JKS file, and name the JKS file "jssecacerts". Place the file in your JRE's lib/security folder. This file will be read before the "cacerts" file in the same directory. Keep in mind that as long as the "jssecacerts" file exists, the certificates installed in "cacerts" will not be used. This may cause problems for you. If you don't mind importing your CA certificate into the "cacerts" file, then you can authenticate against all of the CA certificates installed.

---

18.9.5 HTTP Mirror Server

The HTTP Mirrror Server is a very simple HTTP server - it simply mirrors the data sent to it. This is useful for checking the content of HTTP requests. Control Panel

---

^

18.10.1 Report Plan

---

18.10.2 Report Table

---

18.10.3 HTML Report Writer

---

18.10.4 Report Page

---

18.10.5 Line Graph

---

18.10.6 Bar Chart

---

^