2.1.1 Java Version¶

Because JMeter uses only standard Java APIs, please do not file bug reports if your JRE fails to run JMeter because of JRE implementation issues.

2.1.2 Operating Systems¶

JMeter is a 100% Java application and should run correctly on any system that has a compliant Java implementation.

Operating systems tested with JMeter can be viewed on this page on JMeter wiki.

Even if your OS is not listed on the wiki page, JMeter should run on it provided that the JVM is compliant.

2.2.1 Java Compiler¶

If you want to build the JMeter source or develop JMeter plugins, then you will need a fully compliant JDK 6 or higher.

2.2.2 SAX XML Parser¶

JMeter comes with Apache's Xerces XML parser. You have the option of telling JMeter to use a different XML parser. To do so, include the classes for the third-party parser in JMeter's classpath, and update the jmeter.properties file with the full classname of the parser implementation.

2.2.3 Email Support¶

JMeter has extensive Email capabilities. It can send email based on test results, and has a POP3(S)/IMAP(S) sampler. It also has an SMTP(S) sampler.

2.2.4 SSL Encryption¶

To test a web server using SSL encryption (HTTPS), JMeter requires that an implementation of SSL be provided, as is the case with Sun Java 1.4 and above. If your version of Java does not include SSL support, then it is possible to add an external implementation. Include the necessary encryption packages in JMeter's classpath. Also, update system.properties to register the SSL Provider.

JMeter HTTP defaults to protocol level TLS. This can be changed by editting the JMeter property https.default.protocol in jmeter.properties or user.properties.

The JMeter HTTP samplers are configured to accept all certificates, whether trusted or not, regardless of validity periods, etc. This is to allow the maximum flexibility in testing servers.

If the server requires a client certificate, this can be provided.

There is also the SSL Manager, for greater control of certificates.

The SMTP sampler can optionally use a local trust store or trust all certificates.

2.2.5 JDBC Driver¶

You will need to add your database vendor's JDBC driver to the classpath if you want to do JDBC testing. Make sure the file is a jar file, not a zip.

2.2.6 JMS client¶

JMeter now includes the JMS API from Apache Geronimo, so you just need to add the appropriate JMS Client implementation jar(s) from the JMS provider. Please refer to their documentation for details. There may also be some information on the JMeter Wiki.

2.2.7 Libraries for ActiveMQ JMS¶

You will need to add the jar activemq-all-X.X.X.jar to your classpath, e.g. by storing it in the lib/ directory.

The other required jars (such as commons-logging) are already included with JMeter.

See ActiveMQ initial configuration page for details.

2.4.1 JMeter's Classpath¶

JMeter automatically finds classes from jars in the following directories:

• JMETER_HOME/lib - used for utility jars
• JMETER_HOME/lib/ext - used for JMeter components and plugins

If you have developed new JMeter components, then you should jar them and copy the jar into JMeter's lib/ext directory. JMeter will automatically find JMeter components in any jars found here. Do not use lib/ext for utility jars or dependency jars used by the plugins; it is only intended for JMeter components and plugins.

If you don't want to put JMeter plugin jars in the lib/ext directory, then define the property search_paths in jmeter.properties.

Utility and dependency jars (libraries etc) can be placed in the lib directory.

If you don't want to put such jars in the lib directory, then define the property user.classpath or plugin_dependency_paths in jmeter.properties. See below for an explanation of the differences.

Other jars (such as JDBC, JMS implementations and any other support libaries needed by the JMeter code) should be placed in the lib directory - not the lib/ext directory, or added to user.classpath.

Note: JMeter will only find .jar files, not .zip.

You can also install utility Jar files in $JAVA_HOME/jre/lib/ext, or you can set the property user.classpath in jmeter.properties

Note that setting the CLASSPATH environment variable will have no effect. This is because JMeter is started with "java -jar", and the java command silently ignores the CLASSPATH variable, and the -classpath/-cp options when -jar is used. [This occurs with all Java programs, not just JMeter.]

2.4.2 Create Test Plan from Template¶

You have the ability to create a new Test Plan from existing template.

To do so you use the menu File > Templates... or Templates icon:

A popup appears, you can then choose a template among the list:

A documentation for each template explains what to do once test plan is created from template.

2.4.3 Using JMeter behind a proxy¶

If you are testing from behind a firewall/proxy server, you may need to provide JMeter with the firewall/proxy server hostname and port number. To do so, run the jmeter[.bat] file from a command line with the following parameters:

-H [proxy server hostname or ip address]
-P [proxy server port]
-N [nonproxy hosts] (e.g. *.apache.org|localhost)
-u [username for proxy authentication - if required]
-a [password for proxy authentication - if required]

Example: jmeter -H my.proxy.server -P 8000 -u username -a password -N localhost

You can also use --proxyHost, --proxyPort, --username, and --password as parameter names

If the proxy host and port are provided, then JMeter sets the following System properties:

• http.proxyHost
• http.proxyPort
• https.proxyHost
• https.proxyPort

• http.nonProxyHosts
• https.nonProxyHosts

Proxy Settings can also be defined in a Test Plan, using either the HTTP Request Defaults configuration or the HTTP Request sampler elements.

2.4.4 Non-GUI Mode (Command Line mode)¶

For non-interactive testing, you may choose to run JMeter without the GUI. To do so, use the following command options:

-n This specifies JMeter is to run in non-gui mode
-t [name of JMX file that contains the Test Plan].
-l [name of JTL file to log sample results to].
-j [name of JMeter run log file].
-r Run the test in the servers specified by the JMeter property "remote_hosts"
-R [list of remote servers] Run the test in the specified remote servers

The script also lets you specify the optional firewall/proxy server information:

-H [proxy server hostname or ip address]
-P [proxy server port]

Example: jmeter -n -t my_test.jmx -l log.jtl -H my.proxy.server -P 8000

If the property jmeterengine.stopfail.system.exit is set to true (default is false), then JMeter will invoke System.exit(1) if it cannot stop all threads. Normally this is not necessary.

2.4.5 Server Mode¶

For distributed testing, run JMeter in server mode on the remote node(s), and then control the server(s) from the GUI. You can also use non-GUI mode to run remote tests. To start the server(s), run jmeter-server[.bat] on each server host.

The script also lets you specify the optional firewall/proxy server information:

-H [proxy server hostname or ip address]
-P [proxy server port]

Example: jmeter-server -H my.proxy.server -P 8000

If you want the server to exit after a single test has been run, then define the JMeter property server.exitaftertest=true.

To run the test from the client in non-GUI mode, use the following command:

jmeter -n -t testplan.jmx -r [-Gprop=val] [-Gglobal.properties] [-X]
where:
-G is used to define JMeter properties to be set in the servers
-X means exit the servers at the end of the test
-Rserver1,server2 - can be used instead of -r to provide a list of servers to start
  Overrides remote_hosts, but does not define the property.

If the property jmeterengine.remote.system.exit is set to true (default is false), then JMeter will invoke System.exit(0) after stopping RMI at the end of a test. Normally this is not necessary.

2.4.6 Overriding Properties Via The Command Line¶

Java system properties, JMeter properties, and logging properties can be overriden directly on the command line (instead of modifying jmeter.properties). To do so, use the following options:

-D[prop_name]=[value] - defines a java system property value.
-J[prop name]=[value] - defines a local JMeter property.
-G[prop name]=[value] - defines a JMeter property to be sent to all remote servers.
-G[propertyfile] - defines a file containing JMeter properties to be sent to all remote servers.
-L[category]=[priority] - overrides a logging setting, setting a particular category to the given priority level.

The -L flag can also be used without the category name to set the root logging level.

Examples:

jmeter -Duser.dir=/home/mstover/jmeter_stuff \
    -Jremote_hosts=127.0.0.1 -Ljmeter.engine=DEBUG

jmeter -LDEBUG

N.B.
The command line properties are processed early in startup, but after the logging system has been set up. Attempts to use the -J flag to update log_level or log_file properties will have no effect.

2.4.7 Logging and error messages¶

If JMeter detects an error during a test, a message will be written to the log file. The log file name is defined in the jmeter.properties file (or using the -j option, see below). It defaults to jmeter.log, and will be found in the directory from which JMeter was launched.

The menu Options > Log Viewer displays the log file in a bottom pane on main JMeter window.

In the GUI mode, the number of error/fatal messages logged in the log file is displayed at top-right.

The command-line option -j jmeterlogfile allow to process after the initial properties file is read, and before any further properties are processed. It therefore allows the default of jmeter.log to be overridden. The jmeter scripts that take a test plan name as a parameter (e.g. jmeter-n.cmd) have been updated to define the log file using the test plan name, e.g. for the test plan Test27.jmx the log file is set to Test27.log.

When running on Windows, the file may appear as just jmeter unless you have set Windows to show file extensions. [Which you should do anyway, to make it easier to detect viruses and other nasties that pretend to be text files...]

As well as recording errors, the jmeter.log file records some information about the test run. For example:

10/17/2003 12:19:20 PM INFO  - jmeter.JMeter: Version 1.9.20031002 
10/17/2003 12:19:45 PM INFO  - jmeter.gui.action.Load: Loading file: c:\mytestfiles\BSH.jmx 
10/17/2003 12:19:52 PM INFO  - jmeter.engine.StandardJMeterEngine: Running the test! 
10/17/2003 12:19:52 PM INFO  - jmeter.engine.StandardJMeterEngine: Starting 1 threads for group BSH. Ramp up = 1. 
10/17/2003 12:19:52 PM INFO  - jmeter.engine.StandardJMeterEngine: Continue on error 
10/17/2003 12:19:52 PM INFO  - jmeter.threads.JMeterThread: Thread BSH1-1 started 
10/17/2003 12:19:52 PM INFO  - jmeter.threads.JMeterThread: Thread BSH1-1 is done 
10/17/2003 12:19:52 PM INFO  - jmeter.engine.StandardJMeterEngine: Test has ended

The log file can be helpful in determining the cause of an error, as JMeter does not interrupt a test to display an error dialogue.

2.4.8 Full list of command-line options¶

Invoking JMeter as "jmeter -?" will print a list of all the command-line options. These are shown below.

        -h, --help
                print usage information and exit
        -v, --version
                print the version information and exit
        -p, --propfile {argument}
                the jmeter property file to use
        -q, --addprop {argument}
                additional property file(s)
        -t, --testfile {argument}
                the jmeter test(.jmx) file to run
        -j, --jmeterlogfile {argument}
                the jmeter log file
        -l, --logfile {argument}
                the file to log samples to
        -n, --nongui
                run JMeter in nongui mode
        -s, --server
                run the JMeter server
        -H, --proxyHost {argument}
                Set a proxy server for JMeter to use
        -P, --proxyPort {argument}
                Set proxy server port for JMeter to use
        -u, --username {argument}
                Set username for proxy server that JMeter is to use
        -a, --password {argument}
                Set password for proxy server that JMeter is to use
        -J, --jmeterproperty {argument}={value}
                Define additional JMeter properties
        -G, --globalproperty (argument)[=(value)]
                Define Global properties (sent to servers)
                e.g. -Gport=123
                 or -Gglobal.properties
        -D, --systemproperty {argument}={value}
                Define additional System properties
        -S, --systemPropertyFile {filename}
                a property file to be added as System properties
        -L, --loglevel {argument}={value}
                Define loglevel: [category=]level 
                e.g. jorphan=INFO or jmeter.util=DEBUG
        -r, --runremote (non-GUI only)
                Start remote servers (as defined by the jmeter property remote_hosts)
        -R, --remotestart  server1,... (non-GUI only)
                Start these remote servers (overrides remote_hosts)
        -d, --homedir {argument}
                the jmeter home directory to use
        -X, --remoteexit
                Exit the remote servers at end of test (non-GUI)

Note: the JMeter log file name is formatted as a SimpleDateFormat (applied to the current date) if it contains paired single-quotes, .e.g. 'jmeter_'yyyyMMddHHmmss'.log'

If the special name LAST is used for the -t, -j or -l flags, then JMeter takes that to mean the last test plan that was run in interactive mode.

2.4.9 non-GUI shutdown¶

Prior to version 2.5.1, JMeter invoked System.exit() when a non-GUI test completed. This caused problems for applications that invoke JMeter directly, so JMeter no longer invokes System.exit() for a normal test completion. [Some fatal errors may still invoke System.exit()] JMeter will exit all the non-daemon threads it starts, but it is possible that some non-daemon threads may still remain; these will prevent the JVM from exitting. To detect this situation, JMeter starts a new daemon thread just before it exits. This daemon thread waits a short while; if it returns from the wait, then clearly the JVM has not been able to exit, and the thread prints a message to say why.

The property jmeter.exit.check.pause can be used to override the default pause of 2000ms (2secs). If set to 0, then JMeter does not start the daemon thread.