Hadoop in Secure Mode

End User Accounts

When service level authentication is turned on, end users must authenticate themselves before interacting with Hadoop services. The simplest way is for a user to authenticate interactively using the Kerberos kinit command. Programmatic authentication using Kerberos keytab files may be used when interactive login with kinit is infeasible.

User Accounts for Hadoop Daemons

Ensure that HDFS and YARN daemons run as different Unix users, e.g. hdfs and yarn. Also, ensure that the MapReduce JobHistory server runs as different user such as mapred.

It’s recommended to have them share a Unix group, for e.g. hadoop. See also “Mapping from user to group” for group management.

Kerberos principals for Hadoop Daemons

Each Hadoop Service instance must be configured with its Kerberos principal and keytab file location.

The general format of a Service principal is ServiceName/_HOST@REALM.TLD. e.g. dn/_HOST@EXAMPLE.COM.

Hadoop simplifies the deployment of configuration files by allowing the hostname component of the service principal to be specified as the _HOST wildcard. Each service instance will substitute _HOST with its own fully qualified hostname at runtime. This allows administrators to deploy the same set of configuration files on all nodes. However, the keytab files will be different.

$ klist -e -k -t /etc/security/keytab/nn.service.keytab
Keytab name: FILE:/etc/security/keytab/nn.service.keytab
KVNO Timestamp         Principal
   4 07/18/11 21:08:09 nn/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 nn/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 nn/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
   4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)

$ klist -e -k -t /etc/security/keytab/sn.service.keytab
Keytab name: FILE:/etc/security/keytab/sn.service.keytab
KVNO Timestamp         Principal
   4 07/18/11 21:08:09 sn/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 sn/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 sn/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
   4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)

$ klist -e -k -t /etc/security/keytab/dn.service.keytab
Keytab name: FILE:/etc/security/keytab/dn.service.keytab
KVNO Timestamp         Principal
   4 07/18/11 21:08:09 dn/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 dn/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 dn/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
   4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)

$ klist -e -k -t /etc/security/keytab/rm.service.keytab
Keytab name: FILE:/etc/security/keytab/rm.service.keytab
KVNO Timestamp         Principal
   4 07/18/11 21:08:09 rm/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 rm/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 rm/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
   4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)

$ klist -e -k -t /etc/security/keytab/nm.service.keytab
Keytab name: FILE:/etc/security/keytab/nm.service.keytab
KVNO Timestamp         Principal
   4 07/18/11 21:08:09 nm/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 nm/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 nm/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
   4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)

$ klist -e -k -t /etc/security/keytab/jhs.service.keytab
Keytab name: FILE:/etc/security/keytab/jhs.service.keytab
KVNO Timestamp         Principal
   4 07/18/11 21:08:09 jhs/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 jhs/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 jhs/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
   4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
   4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)

Mapping from Kerberos principals to OS user accounts

Hadoop maps Kerberos principals to OS user (system) accounts using rules specified by hadoop.security.auth_to_local. These rules work in the same way as the auth_to_local in Kerberos configuration file (krb5.conf). In addition, Hadoop auth_to_local mapping supports the /L flag that lowercases the returned name.

The default is to pick the first component of the principal name as the system user name if the realm matches the default_realm (usually defined in /etc/krb5.conf). e.g. The default rule maps the principal host/full.qualified.domain.name@REALM.TLD to system user host. The default rule will not be appropriate for most clusters.

In a typical cluster HDFS and YARN services will be launched as the system hdfs and yarn users respectively. hadoop.security.auth_to_local can be configured as follows:

<property>
  <name>hadoop.security.auth_to_local</name>
  <value>
    RULE:[2:$1/$2@$0]([ndj]n/.*@REALM.TLD)s/.*/hdfs/
    RULE:[2:$1/$2@$0]([rn]m/.*@REALM.TLD)s/.*/yarn/
    RULE:[2:$1/$2@$0](jhs/.*@REALM.TLD)s/.*/mapred/
    DEFAULT
  </value>
</property>

Custom rules can be tested using the hadoop kerbname command. This command allows one to specify a principal and apply Hadoop’s current auth_to_local ruleset.

Mapping from user to group

The system user to system group mapping mechanism can be configured via hadoop.security.group.mapping. See Hadoop Groups Mapping for details.

Practically you need to manage SSO environment using Kerberos with LDAP for Hadoop in secure mode.

Proxy user

Some products such as Apache Oozie which access the services of Hadoop on behalf of end users need to be able to impersonate end users. See the doc of proxy user for details.

Secure DataNode

Because the DataNode data transfer protocol does not use the Hadoop RPC framework, DataNodes must authenticate themselves using privileged ports which are specified by dfs.datanode.address and dfs.datanode.http.address. This authentication is based on the assumption that the attacker won’t be able to get root privileges on DataNode hosts.

When you execute the hdfs datanode command as root, the server process binds privileged ports at first, then drops privilege and runs as the user account specified by HDFS_DATANODE_SECURE_USER. This startup process uses the jsvc program installed to JSVC_HOME. You must specify HDFS_DATANODE_SECURE_USER and JSVC_HOME as environment variables on start up (in hadoop-env.sh).

As of version 2.6.0, SASL can be used to authenticate the data transfer protocol. In this configuration, it is no longer required for secured clusters to start the DataNode as root using jsvc and bind to privileged ports. To enable SASL on data transfer protocol, set dfs.data.transfer.protection in hdfs-site.xml. A SASL enabled DataNode can be started in secure mode in following two ways: 1. Set a non-privileged port for dfs.datanode.address. 1. Set dfs.http.policy to HTTPS_ONLY or set dfs.datanode.http.address to a privileged port and make sure the HDFS_DATANODE_SECURE_USER and JSVC_HOME environment variables are specified properly as environment variables on start up (in hadoop-env.sh).

In order to migrate an existing cluster that used root authentication to start using SASL instead, first ensure that version 2.6.0 or later has been deployed to all cluster nodes as well as any external applications that need to connect to the cluster. Only versions 2.6.0 and later of the HDFS client can connect to a DataNode that uses SASL for authentication of data transfer protocol, so it is vital that all callers have the correct version before migrating. After version 2.6.0 or later has been deployed everywhere, update configuration of any external applications to enable SASL. If an HDFS client is enabled for SASL, then it can connect successfully to a DataNode running with either root authentication or SASL authentication. Changing configuration for all clients guarantees that subsequent configuration changes on DataNodes will not disrupt the applications. Finally, each individual DataNode can be migrated by changing its configuration and restarting. It is acceptable to have a mix of some DataNodes running with root authentication and some DataNodes running with SASL authentication temporarily during this migration period, because an HDFS client enabled for SASL can connect to both.

Data Encryption on RPC

The data transfered between hadoop services and clients can be encrypted on the wire. Setting hadoop.rpc.protection to privacy in core-site.xml activates data encryption.

Data Encryption on Block data transfer.

You need to set dfs.encrypt.data.transfer to true in the hdfs-site.xml in order to activate data encryption for data transfer protocol of DataNode.

Optionally, you may set dfs.encrypt.data.transfer.algorithm to either 3des or rc4 to choose the specific encryption algorithm. If unspecified, then the configured JCE default on the system is used, which is usually 3DES.

Setting dfs.encrypt.data.transfer.cipher.suites to AES/CTR/NoPadding activates AES encryption. By default, this is unspecified, so AES is not used. When AES is used, the algorithm specified in dfs.encrypt.data.transfer.algorithm is still used during an initial key exchange. The AES key bit length can be configured by setting dfs.encrypt.data.transfer.cipher.key.bitlength to 128, 192 or 256. The default is 128.

AES offers the greatest cryptographic strength and the best performance. At this time, 3DES and RC4 have been used more often in Hadoop clusters.

Data Encryption on HTTP

Data transfer between Web-console and clients are protected by using SSL(HTTPS). SSL configuration is recommended but not required to configure Hadoop security with Kerberos.

To enable SSL for web console of HDFS daemons, set dfs.http.policy to either HTTPS_ONLY or HTTP_AND_HTTPS in hdfs-site.xml. Note KMS and HttpFS do not respect this parameter. See Hadoop KMS and Hadoop HDFS over HTTP - Server Setup for instructions on enabling KMS over HTTPS and HttpFS over HTTPS, respectively.

To enable SSL for web console of YARN daemons, set yarn.http.policy to HTTPS_ONLY in yarn-site.xml.

To enable SSL for web console of MapReduce JobHistory server, set mapreduce.jobhistory.http.policy to HTTPS_ONLY in mapred-site.xml.

Permissions for both HDFS and local fileSystem paths

The following table lists various paths on HDFS and local filesystems (on all nodes) and recommended permissions:

Common Configurations

In order to turn on RPC authentication in hadoop, set the value of hadoop.security.authentication property to "kerberos", and set security related settings listed below appropriately.

The following properties should be in the core-site.xml of all the nodes in the cluster.

NameNode

The following settings allow configuring SSL access to the NameNode web UI (optional).

Secondary NameNode

JournalNode

DataNode

WebHDFS

ResourceManager

NodeManager

Configuration for WebAppProxy

The WebAppProxy provides a proxy between the web applications exported by an application and an end user. If security is enabled it will warn users before accessing a potentially unsafe web application. Authentication and authorization using the proxy is handled just like any other privileged web application.

LinuxContainerExecutor

A ContainerExecutor used by YARN framework which define how any container launched and controlled.

The following are the available in Hadoop YARN:

To build the LinuxContainerExecutor executable run:

 $ mvn package -Dcontainer-executor.conf.dir=/etc/hadoop/

The path passed in -Dcontainer-executor.conf.dir should be the path on the cluster nodes where a configuration file for the setuid executable should be located. The executable should be installed in $HADOOP_YARN_HOME/bin.

The executable must have specific permissions: 6050 or --Sr-s--- permissions user-owned by root (super-user) and group-owned by a special group (e.g. hadoop) of which the NodeManager Unix user is the group member and no ordinary application user is. If any application user belongs to this special group, security will be compromised. This special group name should be specified for the configuration property yarn.nodemanager.linux-container-executor.group in both conf/yarn-site.xml and conf/container-executor.cfg.

For example, let’s say that the NodeManager is run as user yarn who is part of the groups users and hadoop, any of them being the primary group. Let also be that users has both yarn and another user (application submitter) alice as its members, and alice does not belong to hadoop. Going by the above description, the setuid/setgid executable should be set 6050 or --Sr-s--- with user-owner as yarn and group-owner as hadoop which has yarn as its member (and not users which has alice also as its member besides yarn).

The LinuxTaskController requires that paths including and leading up to the directories specified in yarn.nodemanager.local-dirs and yarn.nodemanager.log-dirs to be set 755 permissions as described above in the table on permissions on directories.

• conf/container-executor.cfg

The executable requires a configuration file called container-executor.cfg to be present in the configuration directory passed to the mvn target mentioned above.

The configuration file must be owned by the user running NodeManager (user yarn in the above example), group-owned by anyone and should have the permissions 0400 or r-------- .

The executable requires following configuration items to be present in the conf/container-executor.cfg file. The items should be mentioned as simple key=value pairs, one per-line:

To re-cap, here are the local file-sysytem permissions required for the various paths related to the LinuxContainerExecutor:

MapReduce JobHistory Server

Usage

KDiag: Diagnose Kerberos Problems
  [-D key=value] : Define a configuration option.
  [--jaas] : Require a JAAS file to be defined in java.security.auth.login.config.
  [--keylen <keylen>] : Require a minimum size for encryption keys supported by the JVM. Default value : 256.
  [--keytab <keytab> --principal <principal>] : Login from a keytab as a specific principal.
  [--nofail] : Do not fail on the first problem.
  [--nologin] : Do not attempt to log in.
  [--out <file>] : Write output to a file.
  [--resource <resource>] : Load an XML configuration resource.
  [--secure] : Require the hadoop configuration to be secure.
  [--verifyshortname <principal>]: Verify the short name of the specific principal does not contain '@' or '/'

hadoop kdiag --out out.txt

hadoop kdiag --keytab zk.service.keytab --principal zookeeper/devix.example.org@REALM > out.txt 2>&1

hadoop kdiag --resource hbase-default.xml --resource hbase-site.xml

<property>
  <name>hadoop.security.authentication</name>
  <value>simple</value>
</property>

Example

hadoop kdiag \
  --nofail \
  --resource hdfs-site.xml --resource yarn-site.xml \
  --keylen 1024 \
  --keytab zk.service.keytab --principal zookeeper/devix.example.org@REALM

This attempts to to perform all diagnostics without failing early, load in the HDFS and YARN XML resources, require a minimum key length of 1024 bytes, and log in as the principal zookeeper/devix.example.org@REALM, whose key must be in the keytab zk.service.keytab