IMPORTANT This feature is experimental and is not complete. IMPORTANT Enabling this feature and running Docker containers in your cluster has security implications. With this feature enabled, it may be possible to gain root access to the YARN NodeManager hosts. Given Docker’s integration with many powerful kernel features, it is imperative that administrators understand Docker security before enabling this feature.
Docker combines an easy-to-use interface to Linux containers with easy-to-construct image files for those containers. In short, Docker enables users to bundle an application together with its preferred execution environment to be executed on a target machine. For more information about Docker, see their documentation.
The Linux Container Executor (LCE) allows the YARN NodeManager to launch YARN containers to run either directly on the host machine or inside Docker containers. The application requesting the resources can specify for each container how it should be executed. The LCE also provides enhanced security and is required when deploying a secure cluster. When the LCE launches a YARN container to execute in a Docker container, the application can specify the Docker image to be used.
Docker containers provide a custom execution environment in which the application’s code runs, isolated from the execution environment of the NodeManager and other applications. These containers can include special libraries needed by the application, and they can have different versions of native tools and libraries including Perl, Python, and Java. Docker containers can even run a different flavor of Linux than what is running on the NodeManager.
Docker for YARN provides both consistency (all YARN containers will have the same software environment) and isolation (no interference with whatever is installed on the physical machine).
Docker support in the LCE is still evolving. To track progress, follow YARN-3611, the umbrella JIRA for Docker support improvements.
The LCE requires that container-executor binary be owned by root:hadoop and have 6050 permissions. In order to launch Docker containers, the Docker daemon must be running on all NodeManager hosts where Docker containers will be launched. The Docker client must also be installed on all NodeManager hosts where Docker containers will be launched and able to start Docker containers.
To prevent timeouts while starting jobs, any large Docker images to be used by an application should already be loaded in the Docker daemon’s cache on the NodeManager hosts. A simple way to load an image is by issuing a Docker pull request. For example:
sudo docker pull images/hadoop-docker:latest
The following properties should be set in yarn-site.xml:
<configuration>
<property>
<name>yarn.nodemanager.container-executor.class</name>
<value>org.apache.hadoop.yarn.server.nodemanager.LinuxContainerExecutor</value>
<description>
This is the container executor setting that ensures that all applications
are started with the LinuxContainerExecutor.
</description>
</property>
<property>
<name>yarn.nodemanager.linux-container-executor.group</name>
<value>hadoop</value>
<description>
The POSIX group of the NodeManager. It should match the setting in
"container-executor.cfg". This configuration is required for validating
the secure access of the container-executor binary.
</description>
</property>
<property>
<name>yarn.nodemanager.linux-container-executor.nonsecure-mode.limit-users</name>
<value>false</value>
<description>
Whether all applications should be run as the NodeManager process' owner.
When false, applications are launched instead as the application owner.
</description>
</property>
<property>
<name>yarn.nodemanager.runtime.linux.allowed-runtimes</name>
<value>default,docker</value>
<description>
Comma separated list of runtimes that are allowed when using
LinuxContainerExecutor. The allowed values are default, docker, and
javasandbox.
</description>
</property>
<property>
<name>yarn.nodemanager.runtime.linux.docker.allowed-container-networks</name>
<value>host,none,bridge</value>
<description>
Optional. A comma-separated set of networks allowed when launching
containers. Valid values are determined by Docker networks available from
`docker network ls`
</description>
</property>
<property>
<name>yarn.nodemanager.runtime.linux.docker.default-container-network</name>
<value>host</value>
<description>
The network used when launching Docker containers when no
network is specified in the request. This network must be one of the
(configurable) set of allowed container networks.
</description>
</property>
<property>
<name>yarn.nodemanager.runtime.linux.docker.host-pid-namespace.allowed</name>
<value>false</value>
<description>
Optional. Whether containers are allowed to use the host PID namespace.
</description>
</property>
<property>
<name>yarn.nodemanager.runtime.linux.docker.privileged-containers.allowed</name>
<value>false</value>
<description>
Optional. Whether applications are allowed to run in privileged
containers.
</description>
</property>
<property>
<name>yarn.nodemanager.runtime.linux.docker.privileged-containers.acl</name>
<value></value>
<description>
Optional. A comma-separated list of users who are allowed to request
privileged contains if privileged containers are allowed.
</description>
</property>
<property>
<name>yarn.nodemanager.runtime.linux.docker.capabilities</name>
<value>CHOWN,DAC_OVERRIDE,FSETID,FOWNER,MKNOD,NET_RAW,SETGID,SETUID,SETFCAP,SETPCAP,NET_BIND_SERVICE,SYS_CHROOT,KILL,AUDIT_WRITE</value>
<description>
Optional. This configuration setting determines the capabilities
assigned to docker containers when they are launched. While these may not
be case-sensitive from a docker perspective, it is best to keep these
uppercase. To run without any capabilites, set this value to
"none" or "NONE"
</description>
</property>
</configuration>
In addition, a container-executer.cfg file must exist and contain settings for the container executor. The file must be owned by root with permissions 0400. The format of the file is the standard Java properties file format, for example
`key=value`
The following properties are required to enable Docker support:
| Configuration Name | Description |
|---|---|
| yarn.nodemanager.linux-container-executor.group | The Unix group of the NodeManager. It should match the yarn.nodemanager.linux-container-executor.group in the yarn-site.xml file. |
The container-executor.cfg must contain a section to determine the capabilities that containers are allowed. It contains the following properties:
| Configuration Name | Description |
|---|---|
| module.enabled | Must be “true” or “false” to enable or disable launching Docker containers respectively. Default value is 0. |
| docker.binary | The binary used to launch Docker containers. /usr/bin/docker by default. |
| docker.allowed.capabilities | Comma separated capabilities that containers are allowed to add. By default no capabilities are allowed to be added. |
| docker.allowed.devices | Comma separated devices that containers are allowed to mount. By default no devices are allowed to be added. |
| docker.allowed.networks | Comma separated networks that containers are allowed to use. If no network is specified when launching the container, the default Docker network will be used. |
| docker.allowed.ro-mounts | Comma separated directories that containers are allowed to mount in read-only mode. By default, no directories are allowed to mounted. |
| docker.allowed.rw-mounts | Comma separated directories that containers are allowed to mount in read-write mode. By default, no directories are allowed to mounted. |
| docker.host-pid-namespace.enabled | Set to “true” or “false” to enable or disable using the host’s PID namespace. Default value is “false”. |
| docker.privileged-containers.enabled | Set to “true” or “false” to enable or disable launching privileged containers. Default value is “false”. |
| docker.privileged-containers.registries | Comma separated list of trusted docker registries for running trusted privileged docker containers. By default, no registries are defined. |
Please note that if you wish to run Docker containers that require access to the YARN local directories, you must add them to the docker.allowed.rw-mounts list.
In addition, containers are not permitted to mount any parent of the container-executor.cfg directory in read-write mode.
The following properties are optional:
| Configuration Name | Description |
|---|---|
| min.user.id | The minimum UID that is allowed to launch applications. The default is no minimum |
| banned.users | A comma-separated list of usernames who should not be allowed to launch applications. The default setting is: yarn, mapred, hdfs, and bin. |
| allowed.system.users | A comma-separated list of usernames who should be allowed to launch applications even if their UIDs are below the configured minimum. If a user appears in allowed.system.users and banned.users, the user will be considered banned. |
| feature.tc.enabled | Must be “true” or “false”. “false” means traffic control commands are disabled. “true” means traffic control commands are allowed. |
Part of a container-executor.cfg which allows Docker containers to be launched is below:
yarn.nodemanager.linux-container-executor.group=yarn [docker] module.enabled=true docker.privileged-containers.enabled=true docker.privileged-containers.registries=centos docker.allowed.capabilities=SYS_CHROOT,MKNOD,SETFCAP,SETPCAP,FSETID,CHOWN,AUDIT_WRITE,SETGID,NET_RAW,FOWNER,SETUID,DAC_OVERRIDE,KILL,NET_BIND_SERVICE docker.allowed.networks=bridge,host,none docker.allowed.ro-mounts=/sys/fs/cgroup docker.allowed.rw-mounts=/var/hadoop/yarn/local-dir,/var/hadoop/yarn/log-dir
In order to work with YARN, there are two requirements for Docker images.
First, the Docker container will be explicitly launched with the application owner as the container user. If the application owner is not a valid user in the Docker image, the application will fail. The container user is specified by the user’s UID. If the user’s UID is different between the NodeManager host and the Docker image, the container may be launched as the wrong user or may fail to launch because the UID does not exist.
Second, the Docker image must have whatever is expected by the application in order to execute. In the case of Hadoop (MapReduce or Spark), the Docker image must contain the JRE and Hadoop libraries and have the necessary environment variables set: JAVA_HOME, HADOOP_COMMON_PATH, HADOOP_HDFS_HOME, HADOOP_MAPRED_HOME, HADOOP_YARN_HOME, and HADOOP_CONF_DIR. Note that the Java and Hadoop component versions available in the Docker image must be compatible with what’s installed on the cluster and in any other Docker images being used for other tasks of the same job. Otherwise the Hadoop components started in the Docker container may be unable to communicate with external Hadoop components.
If a Docker image has a command set, the behavior will depend on whether the YARN_CONTAINER_RUNTIME_DOCKER_RUN_OVERRIDE_DISABLE is set to true. If so, the command will be overridden when LCE launches the image with YARN’s container launch script.
If a Docker image has an entry point set, the entry point will be honored, but the default command may be overridden, as just mentioned above. Unless the entry point is something similar to sh -c or YARN_CONTAINER_RUNTIME_DOCKER_RUN_OVERRIDE_DISABLE is set to true, the net result will likely be undesirable. Because the YARN container launch script is required to correctly launch the YARN task, use of entry points is discouraged.
If an application requests a Docker image that has not already been loaded by the Docker daemon on the host where it is to execute, the Docker daemon will implicitly perform a Docker pull command. Both MapReduce and Spark assume that tasks which take more that 10 minutes to report progress have stalled, so specifying a large Docker image may cause the application to fail.
Before attempting to launch a Docker container, make sure that the LCE configuration is working for applications requesting regular YARN containers. If after enabling the LCE one or more NodeManagers fail to start, the cause is most likely that the ownership and/or permissions on the container-executer binary are incorrect. Check the logs to confirm.
In order to run an application in a Docker container, set the following environment variables in the application’s environment:
| Environment Variable Name | Description |
|---|---|
| YARN_CONTAINER_RUNTIME_TYPE | Determines whether an application will be launched in a Docker container. If the value is “docker”, the application will be launched in a Docker container. Otherwise a regular process tree container will be used. |
| YARN_CONTAINER_RUNTIME_DOCKER_IMAGE | Names which image will be used to launch the Docker container. Any image name that could be passed to the Docker client’s run command may be used. The image name may include a repo prefix. |
| YARN_CONTAINER_RUNTIME_DOCKER_RUN_OVERRIDE_DISABLE | Controls whether the Docker container’s default command is overridden. When set to true, the Docker container’s command will be “bash path_to_launch_script”. When unset or set to false, the Docker container’s default command is used. |
| YARN_CONTAINER_RUNTIME_DOCKER_CONTAINER_NETWORK | Sets the network type to be used by the Docker container. It must be a valid value as determined by the yarn.nodemanager.runtime.linux.docker.allowed-container-networks property. |
| YARN_CONTAINER_RUNTIME_DOCKER_CONTAINER_PID_NAMESPACE | Controls which PID namespace will be used by the Docker container. By default, each Docker container has its own PID namespace. To share the namespace of the host, the yarn.nodemanager.runtime.linux.docker.host-pid-namespace.allowed property must be set to true. If the host PID namespace is allowed and this environment variable is set to host, the Docker container will share the host’s PID namespace. No other value is allowed. |
| YARN_CONTAINER_RUNTIME_DOCKER_RUN_PRIVILEGED_CONTAINER | Controls whether the Docker container is a privileged container. In order to use privileged containers, the yarn.nodemanager.runtime.linux.docker.privileged-containers.allowed property must be set to true, and the application owner must appear in the value of the yarn.nodemanager.runtime.linux.docker.privileged-containers.acl property. If this environment variable is set to true, a privileged Docker container will be used if allowed. No other value is allowed, so the environment variable should be left unset rather than setting it to false. |
| YARN_CONTAINER_RUNTIME_DOCKER_LOCAL_RESOURCE_MOUNTS | Adds additional volume mounts to the Docker container. The value of the environment variable should be a comma-separated list of mounts. All such mounts must be given as “source:dest”, where the source is an absolute path that is not a symlink and that points to a localized resource. Note that as of YARN-5298, localized directories are automatically mounted into the container as volumes. |
| YARN_CONTAINER_RUNTIME_DOCKER_MOUNTS | Adds additional volume mounts to the Docker container. The value of the environment variable should be a comma-separated list of mounts. All such mounts must be given as “source:dest:mode” and the mode must be “ro” (read-only) or “rw” (read-write) to specify the type of access being requested. The requested mounts will be validated by container-executor based on the values set in container-executor.cfg for docker.allowed.ro-mounts and docker.allowed.rw-mounts. |
| YARN_CONTAINER_RUNTIME_DOCKER_DELAYED_REMOVAL | Allows a user to request delayed deletion of the Docker container on a per container basis. If true, Docker containers will not be removed until the duration defined by yarn.nodemanager.delete.debug-delay-sec has elapsed. Administrators can disable this feature through the yarn-site property yarn.nodemanager.runtime.linux.docker.delayed-removal.allowed. This feature is disabled by default. When this feature is disabled or set to false, the container will be removed as soon as it exits. |
The first two are required. The remainder can be set as needed. While controlling the container type through environment variables is somewhat less than ideal, it allows applications with no awareness of YARN’s Docker support (such as MapReduce and Spark) to nonetheless take advantage of it through their support for configuring the application environment.
Once an application has been submitted to be launched in a Docker container, the application will behave exactly as any other YARN application. Logs will be aggregated and stored in the relevant history server. The application life cycle will be the same as for a non-Docker application.
WARNING Care should be taken when enabling this feature. Enabling access to directories such as, but not limited to, /, /etc, /run, or /home is not advisable and can result in containers negatively impacting the host or leaking sensitive information. WARNING
Files and directories from the host are commonly needed within the Docker containers, which Docker provides through volumes. Examples include localized resources, Apache Hadoop binaries, and sockets. To facilitate this need, YARN-6623 added the ability for administrators to set a whitelist of host directories that are allowed to be bind mounted as volumes into containers. YARN-5534 added the ability for users to supply a list of mounts that will be mounted into the containers, if allowed by the administrative whitelist.
In order to make use of this feature, the following must be configured.
The administrator supplied whitelist is defined as a comma separated list of directories that are allowed to be mounted into containers. The source directory supplied by the user must either match or be a child of the specified directory.
The user supplied mount list is defined as a comma separated list in the form source:destination:mode. The source is the file or directory on the host. The destination is the path within the contatiner where the source will be bind mounted. The mode defines the mode the user expects for the mount, which can be ro (read-only) or rw (read-write).
The following example outlines how to use this feature to mount the commonly needed /sys/fs/cgroup directory into the container running on YARN.
The administrator sets docker.allowed.ro-mounts in container-executor.cfg to “/sys/fs/cgroup”. Applications can now request that “/sys/fs/cgroup” be mounted from the host into the container in read-only mode.
At application submission time, the YARN_CONTAINER_RUNTIME_DOCKER_MOUNTS environment variable can then be set to request this mount. In this example, the environment variable would be set to “/sys/fs/cgroup:/sys/fs/cgroup:ro”. The destination path is not restricted, “/sys/fs/cgroup:/cgroup:ro” would also be valid given the example admin whitelist.
Privileged docker container can interact with host system devices. This can cause harm to host operating system without proper care. In order to mitigate risk of allowing privileged container to run on Hadoop cluster, we implemented a controlled process to sandbox unauthorized privileged docker images.
The default behavior is disallow any privileged docker containers. When docker.privileged-containers.enabled is set to enabled, docker image can run with root privileges in the docker container, but access to host level devices are disabled. This allows developer and tester to run docker images from internet without causing harm to host operating system.
When docker images have been certified by developers and testers to be trustworthy. The trusted image can be promoted to trusted docker registry. System administrator can define docker.privileged-containers.registries, and setup private docker registry server to promote trusted images.
Trusted images are allowed to mount external devices such as HDFS via NFS gateway, or host level Hadoop configuration. If system administrators allow writing to external volumes using docker.allow.rw-mounts directive, privileged docker container can have full control of host level files in the predefined volumes.
For YARN Service HTTPD example, container-executor.cfg must define centos docker registry to be trusted for the example to run.
The Docker client command will draw its configuration from the default location, which is $HOME/.docker/config.json on the NodeManager host. The Docker configuration is where secure repository credentials are stored, so use of the LCE with secure Docker repos is discouraged using this method.
YARN-5428 added support to Distributed Shell for securely supplying the Docker client configuration. See the Distributed Shell help for usage. Support for additional frameworks is planned.
As a work-around, you may manually log the Docker daemon on every NodeManager host into the secure repo using the Docker login command:
docker login [OPTIONS] [SERVER] Register or log in to a Docker registry server, if no server is specified "https://index.docker.io/v1/" is the default. -e, --email="" Email -p, --password="" Password -u, --username="" Username
Note that this approach means that all users will have access to the secure repo.
To submit the pi job to run in Docker containers, run the following commands:
vars="YARN_CONTAINER_RUNTIME_TYPE=docker,YARN_CONTAINER_RUNTIME_DOCKER_IMAGE=hadoop-docker"
hadoop jar hadoop-examples.jar pi -Dyarn.app.mapreduce.am.env=$vars \
-Dmapreduce.map.env=$vars -Dmapreduce.reduce.env=$vars 10 100
Note that the application master, map tasks, and reduce tasks are configured independently. In this example, we are using the hadoop-docker image for all three.
To run a Spark shell in Docker containers, run the following command:
spark-shell --master yarn --conf spark.executorEnv.YARN_CONTAINER_RUNTIME_TYPE=docker \
--conf spark.executorEnv.YARN_CONTAINER_RUNTIME_DOCKER_IMAGE=hadoop-docker \
--conf spark.yarn.AppMasterEnv.YARN_CONTAINER_RUNTIME_DOCKER_IMAGE=hadoop-docker \
--conf spark.yarn.AppMasterEnv.YARN_CONTAINER_RUNTIME_TYPE=docker
Note that the application master and executors are configured independently. In this example, we are using the hadoop-docker image for both.