org.apache.commons.httpclient
Class URI

java.lang.Object
  extended by org.apache.commons.httpclient.URI
All Implemented Interfaces:
Serializable, Cloneable, Comparable
Direct Known Subclasses:
HttpURL, URIUtil.Coder

public class URI
extends Object
implements Cloneable, Comparable, Serializable

The interface for the URI(Uniform Resource Identifiers) version of RFC 2396. This class has the purpose of supportting of parsing a URI reference to extend any specific protocols, the character encoding of the protocol to be transported and the charset of the document.

A URI is always in an "escaped" form, since escaping or unescaping a completed URI might change its semantics.

Implementers should be careful not to escape or unescape the same string more than once, since unescaping an already unescaped string might lead to misinterpreting a percent data character as another escaped character, or vice versa in the case of escaping an already escaped string.

In order to avoid these problems, data types used as follows:

   URI character sequence: char
   octet sequence: byte
   original character sequence: String
 

So, a URI is a sequence of characters as an array of a char type, which is not always represented as a sequence of octets as an array of byte.

URI Syntactic Components

 - In general, written as follows:
   Absolute URI = <scheme>:<scheme-specific-part>
   Generic URI = <scheme>://<authority><path>?<query>

 - Syntax
   absoluteURI   = scheme ":" ( hier_part | opaque_part )
   hier_part     = ( net_path | abs_path ) [ "?" query ]
   net_path      = "//" authority [ abs_path ]
   abs_path      = "/"  path_segments
 

The following examples illustrate URI that are in common use.

 ftp://ftp.is.co.za/rfc/rfc1808.txt
    -- ftp scheme for File Transfer Protocol services
 gopher://spinaltap.micro.umn.edu/00/Weather/California/Los%20Angeles
    -- gopher scheme for Gopher and Gopher+ Protocol services
 http://www.math.uio.no/faq/compression-faq/part1.html
    -- http scheme for Hypertext Transfer Protocol services
 mailto:mduerst@ifi.unizh.ch
    -- mailto scheme for electronic mail addresses
 news:comp.infosystems.www.servers.unix
    -- news scheme for USENET news groups and articles
 telnet://melvyl.ucop.edu/
    -- telnet scheme for interactive services via the TELNET Protocol
 
Please, notice that there are many modifications from URL(RFC 1738) and relative URL(RFC 1808).

The expressions for a URI

 For escaped URI forms
  - URI(char[]) // constructor
  - char[] getRawXxx() // method
  - String getEscapedXxx() // method
  - String toString() // method
 

For unescaped URI forms - URI(String) // constructor - String getXXX() // method

Version:
$Revision$ $Date: 2002/03/14 15:14:01
Author:
Sung-Gu, Mike Bowler
See Also:
Serialized Form

Nested Class Summary
static class URI.DefaultCharsetChanged
          The charset-changed normal operation to represent to be required to alert to user the fact the default charset is changed.
static class URI.LocaleToCharsetMap
          A mapping to determine the (somewhat arbitrarily) preferred charset for a given locale.
 
Field Summary
protected  char[] _authority
          The authority.
protected  char[] _fragment
          The fragment.
protected  char[] _host
          The host.
protected  boolean _is_abs_path
           
protected  boolean _is_hier_part
           
protected  boolean _is_hostname
           
protected  boolean _is_IPv4address
           
protected  boolean _is_IPv6reference
           
protected  boolean _is_net_path
           
protected  boolean _is_opaque_part
           
protected  boolean _is_reg_name
           
protected  boolean _is_rel_path
           
protected  boolean _is_server
           
protected  char[] _opaque
          The opaque.
protected  char[] _path
          The path.
protected  int _port
          The port.
protected  char[] _query
          The query.
protected  char[] _scheme
          The scheme.
protected  char[] _uri
          This Uniform Resource Identifier (URI).
protected  char[] _userinfo
          The userinfo.
protected static BitSet abs_path
          URI absolute path.
protected static BitSet absoluteURI
          BitSet for absoluteURI.
static BitSet allowed_abs_path
          Those characters that are allowed for the abs_path.
static BitSet allowed_authority
          Those characters that are allowed for the authority component.
static BitSet allowed_fragment
          Those characters that are allowed for the fragment component.
static BitSet allowed_host
          Those characters that are allowed for the host component.
static BitSet allowed_IPv6reference
          Those characters that are allowed for the IPv6reference component.
static BitSet allowed_opaque_part
          Those characters that are allowed for the opaque_part.
static BitSet allowed_query
          Those characters that are allowed for the query component.
static BitSet allowed_reg_name
          Those characters that are allowed for the reg_name.
static BitSet allowed_rel_path
          Those characters that are allowed for the rel_path.
static BitSet allowed_userinfo
          Those characters that are allowed for the userinfo component.
static BitSet allowed_within_authority
          Those characters that are allowed for the authority component.
static BitSet allowed_within_path
          Those characters that are allowed within the path.
static BitSet allowed_within_query
          Those characters that are allowed within the query component.
static BitSet allowed_within_userinfo
          Those characters that are allowed for within the userinfo component.
protected static BitSet alpha
          BitSet for alpha.
protected static BitSet alphanum
          BitSet for alphanum (join of alpha & digit).
protected static BitSet authority
          BitSet for authority.
static BitSet control
          BitSet for control.
protected static String defaultDocumentCharset
          The default charset of the document.
protected static String defaultDocumentCharsetByLocale
           
protected static String defaultDocumentCharsetByPlatform
           
protected static String defaultProtocolCharset
          The default charset of the protocol.
static BitSet delims
          BitSet for delims.
protected static BitSet digit
          BitSet for digit.
static BitSet disallowed_opaque_part
          Disallowed opaque_part before escaping.
static BitSet disallowed_rel_path
          Disallowed rel_path before escaping.
protected static BitSet domainlabel
          BitSet for domainlabel.
protected static BitSet escaped
          BitSet for escaped.
protected static BitSet fragment
          BitSet for fragment (alias for uric).
protected  int hash
          Cache the hash code for this URI.
protected static BitSet hex
          BitSet for hex.
protected static BitSet hier_part
          BitSet for hier_part.
protected static BitSet host
          BitSet for host.
protected static BitSet hostname
          BitSet for hostname.
protected static BitSet hostport
          BitSet for hostport.
protected static BitSet IPv4address
          Bitset that combines digit and dot fo IPv$address.
protected static BitSet IPv6address
          RFC 2373.
protected static BitSet IPv6reference
          RFC 2732, 2373.
protected static BitSet mark
          BitSet for mark.
protected static BitSet net_path
          BitSet for net_path.
protected static BitSet opaque_part
          URI bitset that combines uric_no_slash and uric.
protected static BitSet param
          BitSet for param (alias for pchar).
protected static BitSet path
          URI bitset that combines absolute path and opaque part.
protected static BitSet path_segments
          BitSet for path segments.
protected static BitSet pchar
          BitSet for pchar.
protected static BitSet percent
          The percent "%" character always has the reserved purpose of being the escape indicator, it must be escaped as "%25" in order to be used as data within a URI.
protected static BitSet port
          Port, a logical alias for digit.
protected  String protocolCharset
          The charset of the protocol used by this URI instance.
protected static BitSet query
          BitSet for query (alias for uric).
protected static BitSet reg_name
          BitSet for reg_name.
protected static BitSet rel_path
          BitSet for rel_path.
protected static BitSet rel_segment
          BitSet for rel_segment.
protected static BitSet relativeURI
          BitSet for relativeURI.
protected static BitSet reserved
          BitSet for reserved.
protected static char[] rootPath
          The root path.
protected static BitSet scheme
          BitSet for scheme.
protected static BitSet segment
          BitSet for segment.
protected static BitSet server
          Bitset for server.
static BitSet space
          BitSet for space.
protected static BitSet toplabel
          BitSet for toplabel.
protected static BitSet unreserved
          Data characters that are allowed in a URI but do not have a reserved purpose are called unreserved.
static BitSet unwise
          BitSet for unwise.
protected static BitSet URI_reference
          BitSet for URI-reference.
protected static BitSet uric
          BitSet for uric.
protected static BitSet uric_no_slash
          URI bitset for encoding typical non-slash characters.
protected static BitSet userinfo
          Bitset for userinfo.
static BitSet within_userinfo
          BitSet for within the userinfo component like user and password.
 
Constructor Summary
protected URI()
          Create an instance as an internal use
  URI(char[] escaped)
          Deprecated. Use #URI(String, boolean)
  URI(char[] escaped, String charset)
          Deprecated. Use #URI(String, boolean, String)
  URI(String original)
          Deprecated. Use #URI(String, boolean)
  URI(String s, boolean escaped)
          Construct a URI from a string with the given charset.
  URI(String s, boolean escaped, String charset)
          Construct a URI from a string with the given charset.
  URI(String original, String charset)
          Deprecated. Use #URI(String, boolean, String)
  URI(String scheme, String schemeSpecificPart, String fragment)
          Construct a general URI from the given components.
  URI(String scheme, String userinfo, String host, int port)
          Construct a general URI from the given components.
  URI(String scheme, String userinfo, String host, int port, String path)
          Construct a general URI from the given components.
  URI(String scheme, String userinfo, String host, int port, String path, String query)
          Construct a general URI from the given components.
  URI(String scheme, String userinfo, String host, int port, String path, String query, String fragment)
          Construct a general URI from the given components.
  URI(String scheme, String host, String path, String fragment)
          Construct a general URI from the given components.
  URI(String scheme, String authority, String path, String query, String fragment)
          Construct a general URI from the given components.
  URI(URI base, String relative)
          Deprecated. Use #URI(URI, String, boolean)
  URI(URI base, String relative, boolean escaped)
          Construct a general URI with the given relative URI string.
  URI(URI base, URI relative)
          Construct a general URI with the given relative URI.
 
Method Summary
 Object clone()
          Create and return a copy of this object, the URI-reference containing the userinfo component.
 int compareTo(Object obj)
          Compare this URI to another object.
protected static String decode(char[] component, String charset)
          Decodes URI encoded string.
protected static String decode(String component, String charset)
          Decodes URI encoded string.
protected static char[] encode(String original, BitSet allowed, String charset)
          Encodes URI string.
protected  boolean equals(char[] first, char[] second)
          Test if the first array is equal to the second array.
 boolean equals(Object obj)
          Test an object if this URI is equal to another.
 String getAboveHierPath()
          Get the level above the this hierarchy level.
 String getAuthority()
          Get the authority.
 String getCurrentHierPath()
          Get the current hierarchy level.
static String getDefaultDocumentCharset()
          Get the recommended default charset of the document.
static String getDefaultDocumentCharsetByLocale()
          Get the default charset of the document by locale.
static String getDefaultDocumentCharsetByPlatform()
          Get the default charset of the document by platform.
static String getDefaultProtocolCharset()
          Get the default charset of the protocol.
 String getEscapedAboveHierPath()
          Get the level above the this hierarchy level.
 String getEscapedAuthority()
          Get the escaped authority.
 String getEscapedCurrentHierPath()
          Get the escaped current hierarchy level.
 String getEscapedFragment()
          Get the escaped fragment.
 String getEscapedName()
          Get the escaped basename of the path.
 String getEscapedPath()
          Get the escaped path.
 String getEscapedPathQuery()
          Get the escaped query.
 String getEscapedQuery()
          Get the escaped query.
 String getEscapedURI()
          It can be gotten the URI character sequence.
 String getEscapedURIReference()
          Get the escaped URI reference string.
 String getEscapedUserinfo()
          Get the escaped userinfo.
 String getFragment()
          Get the fragment.
 String getHost()
          Get the host.
 String getName()
          Get the basename of the path.
 String getPath()
          Get the path.
 String getPathQuery()
          Get the path and query.
 int getPort()
          Get the port.
 String getProtocolCharset()
          Get the protocol charset used by this current URI instance.
 String getQuery()
          Get the query.
 char[] getRawAboveHierPath()
          Get the level above the this hierarchy level.
 char[] getRawAuthority()
          Get the raw-escaped authority.
 char[] getRawCurrentHierPath()
          Get the raw-escaped current hierarchy level.
protected  char[] getRawCurrentHierPath(char[] path)
          Get the raw-escaped current hierarchy level in the given path.
 char[] getRawFragment()
          Get the raw-escaped fragment.
 char[] getRawHost()
          Get the host.
 char[] getRawName()
          Get the raw-escaped basename of the path.
 char[] getRawPath()
          Get the raw-escaped path.
 char[] getRawPathQuery()
          Get the raw-escaped path and query.
 char[] getRawQuery()
          Get the raw-escaped query.
 char[] getRawScheme()
          Get the scheme.
 char[] getRawURI()
          It can be gotten the URI character sequence.
 char[] getRawURIReference()
          Get the URI reference character sequence.
 char[] getRawUserinfo()
          Get the raw-escaped userinfo.
 String getScheme()
          Get the scheme.
 String getURI()
          It can be gotten the URI character sequence.
 String getURIReference()
          Get the original URI reference string.
 String getUserinfo()
          Get the userinfo.
 boolean hasAuthority()
          Tell whether or not this URI has authority.
 boolean hasFragment()
          Tell whether or not this URI has fragment.
 int hashCode()
          Return a hash code for this URI.
 boolean hasQuery()
          Tell whether or not this URI has query.
 boolean hasUserinfo()
          Tell whether or not this URI has userinfo.
protected  int indexFirstOf(char[] s, char delim)
          Get the earlier index that to be searched for the first occurrance in one of any of the given array.
protected  int indexFirstOf(char[] s, char delim, int offset)
          Get the earlier index that to be searched for the first occurrance in one of any of the given array.
protected  int indexFirstOf(String s, String delims)
          Get the earlier index that to be searched for the first occurrance in one of any of the given string.
protected  int indexFirstOf(String s, String delims, int offset)
          Get the earlier index that to be searched for the first occurrance in one of any of the given string.
 boolean isAbsoluteURI()
          Tell whether or not this URI is absolute.
 boolean isAbsPath()
          Tell whether or not the relativeURI or hier_part of this URI is abs_path.
 boolean isHierPart()
          Tell whether or not the absoluteURI of this URI is hier_part.
 boolean isHostname()
          Tell whether or not the host part of this URI is hostname.
 boolean isIPv4address()
          Tell whether or not the host part of this URI is IPv4address.
 boolean isIPv6reference()
          Tell whether or not the host part of this URI is IPv6reference.
 boolean isNetPath()
          Tell whether or not the relativeURI or heir_part of this URI is net_path.
 boolean isOpaquePart()
          Tell whether or not the absoluteURI of this URI is opaque_part.
 boolean isRegName()
          Tell whether or not the authority component of this URI is reg_name.
 boolean isRelativeURI()
          Tell whether or not this URI is relative.
 boolean isRelPath()
          Tell whether or not the relativeURI of this URI is rel_path.
 boolean isServer()
          Tell whether or not the authority component of this URI is server.
 void normalize()
          Normalizes the path part of this URI.
protected  char[] normalize(char[] path)
          Normalize the given hier path part.
protected  void parseAuthority(String original, boolean escaped)
          Parse the authority component.
protected  void parseUriReference(String original, boolean escaped)
          In order to avoid any possilbity of conflict with non-ASCII characters, Parse a URI reference as a String with the character encoding of the local system or the document.
protected  boolean prevalidate(String component, BitSet disallowed)
          Pre-validate the unescaped URI string within a specific component.
protected  char[] removeFragmentIdentifier(char[] component)
          Remove the fragment identifier of the given component.
protected  char[] resolvePath(char[] basePath, char[] relPath)
          Resolve the base and relative path.
static void setDefaultDocumentCharset(String charset)
          Set the default charset of the document.
static void setDefaultProtocolCharset(String charset)
          Set the default charset of the protocol.
 void setEscapedAuthority(String escapedAuthority)
          Set the authority.
 void setEscapedFragment(String escapedFragment)
          Set the escaped fragment string.
 void setEscapedPath(String escapedPath)
          Set the escaped path.
 void setEscapedQuery(String escapedQuery)
          Set the escaped query string.
 void setFragment(String fragment)
          Set the fragment.
 void setPath(String path)
          Set the path.
 void setQuery(String query)
          Set the query.
 void setRawAuthority(char[] escapedAuthority)
          Set the authority.
 void setRawFragment(char[] escapedFragment)
          Set the raw-escaped fragment.
 void setRawPath(char[] escapedPath)
          Set the raw-escaped path.
 void setRawQuery(char[] escapedQuery)
          Set the raw-escaped query.
protected  void setURI()
          Once it's parsed successfully, set this URI.
 String toString()
          Get the escaped URI string.
protected  boolean validate(char[] component, BitSet generous)
          Validate the URI characters within a specific component.
protected  boolean validate(char[] component, int soffset, int eoffset, BitSet generous)
          Validate the URI characters within a specific component.
 
Methods inherited from class java.lang.Object
finalize, getClass, notify, notifyAll, wait, wait, wait
 

Field Detail

hash

protected int hash
Cache the hash code for this URI.


_uri

protected char[] _uri
This Uniform Resource Identifier (URI). The URI is always in an "escaped" form, since escaping or unescaping a completed URI might change its semantics.


protocolCharset

protected String protocolCharset
The charset of the protocol used by this URI instance.


defaultProtocolCharset

protected static String defaultProtocolCharset
The default charset of the protocol. RFC 2277, 2396


defaultDocumentCharset

protected static String defaultDocumentCharset
The default charset of the document. RFC 2277, 2396 The platform's charset is used for the document by default.


defaultDocumentCharsetByLocale

protected static String defaultDocumentCharsetByLocale

defaultDocumentCharsetByPlatform

protected static String defaultDocumentCharsetByPlatform

_scheme

protected char[] _scheme
The scheme.


_opaque

protected char[] _opaque
The opaque.


_authority

protected char[] _authority
The authority.


_userinfo

protected char[] _userinfo
The userinfo.


_host

protected char[] _host
The host.


_port

protected int _port
The port.


_path

protected char[] _path
The path.


_query

protected char[] _query
The query.


_fragment

protected char[] _fragment
The fragment.


rootPath

protected static final char[] rootPath
The root path.


percent

protected static final BitSet percent
The percent "%" character always has the reserved purpose of being the escape indicator, it must be escaped as "%25" in order to be used as data within a URI.


digit

protected static final BitSet digit
BitSet for digit.

 digit    = "0" | "1" | "2" | "3" | "4" | "5" | "6" | "7" |
            "8" | "9"
 


alpha

protected static final BitSet alpha
BitSet for alpha.

 alpha         = lowalpha | upalpha
 


alphanum

protected static final BitSet alphanum
BitSet for alphanum (join of alpha & digit).

  alphanum      = alpha | digit
 


hex

protected static final BitSet hex
BitSet for hex.

 hex           = digit | "A" | "B" | "C" | "D" | "E" | "F" |
                         "a" | "b" | "c" | "d" | "e" | "f"
 


escaped

protected static final BitSet escaped
BitSet for escaped.

 escaped       = "%" hex hex
 


mark

protected static final BitSet mark
BitSet for mark.

 mark          = "-" | "_" | "." | "!" | "~" | "*" | "'" |
                 "(" | ")"
 


unreserved

protected static final BitSet unreserved
Data characters that are allowed in a URI but do not have a reserved purpose are called unreserved.

 unreserved    = alphanum | mark
 


reserved

protected static final BitSet reserved
BitSet for reserved.

 reserved      = ";" | "/" | "?" | ":" | "@" | "&" | "=" | "+" |
                 "$" | ","
 


uric

protected static final BitSet uric
BitSet for uric.

 uric          = reserved | unreserved | escaped
 


fragment

protected static final BitSet fragment
BitSet for fragment (alias for uric).

 fragment      = *uric
 


query

protected static final BitSet query
BitSet for query (alias for uric).

 query         = *uric
 


pchar

protected static final BitSet pchar
BitSet for pchar.

 pchar         = unreserved | escaped |
                 ":" | "@" | "&" | "=" | "+" | "$" | ","
 


param

protected static final BitSet param
BitSet for param (alias for pchar).

 param         = *pchar
 


segment

protected static final BitSet segment
BitSet for segment.

 segment       = *pchar *( ";" param )
 


path_segments

protected static final BitSet path_segments
BitSet for path segments.

 path_segments = segment *( "/" segment )
 


abs_path

protected static final BitSet abs_path
URI absolute path.

 abs_path      = "/"  path_segments
 


uric_no_slash

protected static final BitSet uric_no_slash
URI bitset for encoding typical non-slash characters.

 uric_no_slash = unreserved | escaped | ";" | "?" | ":" | "@" |
                 "&" | "=" | "+" | "$" | ","
 


opaque_part

protected static final BitSet opaque_part
URI bitset that combines uric_no_slash and uric.

 opaque_part   = uric_no_slash *uric
 


path

protected static final BitSet path
URI bitset that combines absolute path and opaque part.

 path          = [ abs_path | opaque_part ]
 


port

protected static final BitSet port
Port, a logical alias for digit.


IPv4address

protected static final BitSet IPv4address
Bitset that combines digit and dot fo IPv$address.

 IPv4address   = 1*digit "." 1*digit "." 1*digit "." 1*digit
 


IPv6address

protected static final BitSet IPv6address
RFC 2373.

 IPv6address = hexpart [ ":" IPv4address ]
 


IPv6reference

protected static final BitSet IPv6reference
RFC 2732, 2373.

 IPv6reference   = "[" IPv6address "]"
 


toplabel

protected static final BitSet toplabel
BitSet for toplabel.

 toplabel      = alpha | alpha *( alphanum | "-" ) alphanum
 


domainlabel

protected static final BitSet domainlabel
BitSet for domainlabel.

 domainlabel   = alphanum | alphanum *( alphanum | "-" ) alphanum
 


hostname

protected static final BitSet hostname
BitSet for hostname.

 hostname      = *( domainlabel "." ) toplabel [ "." ]
 


host

protected static final BitSet host
BitSet for host.

 host          = hostname | IPv4address | IPv6reference
 


hostport

protected static final BitSet hostport
BitSet for hostport.

 hostport      = host [ ":" port ]
 


userinfo

protected static final BitSet userinfo
Bitset for userinfo.

 userinfo      = *( unreserved | escaped |
                    ";" | ":" | "&" | "=" | "+" | "$" | "," )
 


within_userinfo

public static final BitSet within_userinfo
BitSet for within the userinfo component like user and password.


server

protected static final BitSet server
Bitset for server.

 server        = [ [ userinfo "@" ] hostport ]
 


reg_name

protected static final BitSet reg_name
BitSet for reg_name.

 reg_name      = 1*( unreserved | escaped | "$" | "," |
                     ";" | ":" | "@" | "&" | "=" | "+" )
 


authority

protected static final BitSet authority
BitSet for authority.

 authority     = server | reg_name
 


scheme

protected static final BitSet scheme
BitSet for scheme.

 scheme        = alpha *( alpha | digit | "+" | "-" | "." )
 


rel_segment

protected static final BitSet rel_segment
BitSet for rel_segment.

 rel_segment   = 1*( unreserved | escaped |
                     ";" | "@" | "&" | "=" | "+" | "$" | "," )
 


rel_path

protected static final BitSet rel_path
BitSet for rel_path.

 rel_path      = rel_segment [ abs_path ]
 


net_path

protected static final BitSet net_path
BitSet for net_path.

 net_path      = "//" authority [ abs_path ]
 


hier_part

protected static final BitSet hier_part
BitSet for hier_part.

 hier_part     = ( net_path | abs_path ) [ "?" query ]
 


relativeURI

protected static final BitSet relativeURI
BitSet for relativeURI.

 relativeURI   = ( net_path | abs_path | rel_path ) [ "?" query ]
 


absoluteURI

protected static final BitSet absoluteURI
BitSet for absoluteURI.

 absoluteURI   = scheme ":" ( hier_part | opaque_part )
 


URI_reference

protected static final BitSet URI_reference
BitSet for URI-reference.

 URI-reference = [ absoluteURI | relativeURI ] [ "#" fragment ]
 


control

public static final BitSet control
BitSet for control.


space

public static final BitSet space
BitSet for space.


delims

public static final BitSet delims
BitSet for delims.


unwise

public static final BitSet unwise
BitSet for unwise.


disallowed_rel_path

public static final BitSet disallowed_rel_path
Disallowed rel_path before escaping.


disallowed_opaque_part

public static final BitSet disallowed_opaque_part
Disallowed opaque_part before escaping.


allowed_authority

public static final BitSet allowed_authority
Those characters that are allowed for the authority component.


allowed_opaque_part

public static final BitSet allowed_opaque_part
Those characters that are allowed for the opaque_part.


allowed_reg_name

public static final BitSet allowed_reg_name
Those characters that are allowed for the reg_name.


allowed_userinfo

public static final BitSet allowed_userinfo
Those characters that are allowed for the userinfo component.


allowed_within_userinfo

public static final BitSet allowed_within_userinfo
Those characters that are allowed for within the userinfo component.


allowed_IPv6reference

public static final BitSet allowed_IPv6reference
Those characters that are allowed for the IPv6reference component. The characters '[', ']' in IPv6reference should be excluded.


allowed_host

public static final BitSet allowed_host
Those characters that are allowed for the host component. The characters '[', ']' in IPv6reference should be excluded.


allowed_within_authority

public static final BitSet allowed_within_authority
Those characters that are allowed for the authority component.


allowed_abs_path

public static final BitSet allowed_abs_path
Those characters that are allowed for the abs_path.


allowed_rel_path

public static final BitSet allowed_rel_path
Those characters that are allowed for the rel_path.


allowed_within_path

public static final BitSet allowed_within_path
Those characters that are allowed within the path.


allowed_query

public static final BitSet allowed_query
Those characters that are allowed for the query component.


allowed_within_query

public static final BitSet allowed_within_query
Those characters that are allowed within the query component.


allowed_fragment

public static final BitSet allowed_fragment
Those characters that are allowed for the fragment component.


_is_hier_part

protected boolean _is_hier_part

_is_opaque_part

protected boolean _is_opaque_part

_is_net_path

protected boolean _is_net_path

_is_abs_path

protected boolean _is_abs_path

_is_rel_path

protected boolean _is_rel_path

_is_reg_name

protected boolean _is_reg_name

_is_server

protected boolean _is_server

_is_hostname

protected boolean _is_hostname

_is_IPv4address

protected boolean _is_IPv4address

_is_IPv6reference

protected boolean _is_IPv6reference
Constructor Detail

URI

protected URI()
Create an instance as an internal use


URI

public URI(String s,
           boolean escaped,
           String charset)
    throws URIException,
           NullPointerException
Construct a URI from a string with the given charset. The input string can be either in escaped or unescaped form.

Parameters:
s - URI character sequence
escaped - true if URI character sequence is in escaped form. false otherwise.
charset - the charset string to do escape encoding, if required
Throws:
URIException - If the URI cannot be created.
NullPointerException - if input string is null
Since:
3.0
See Also:
getProtocolCharset()

URI

public URI(String s,
           boolean escaped)
    throws URIException,
           NullPointerException
Construct a URI from a string with the given charset. The input string can be either in escaped or unescaped form.

Parameters:
s - URI character sequence
escaped - true if URI character sequence is in escaped form. false otherwise.
Throws:
URIException - If the URI cannot be created.
NullPointerException - if input string is null
Since:
3.0
See Also:
getProtocolCharset()

URI

public URI(char[] escaped,
           String charset)
    throws URIException,
           NullPointerException
Deprecated. Use #URI(String, boolean, String)

Construct a URI as an escaped form of a character array with the given charset.

Parameters:
escaped - the URI character sequence
charset - the charset string to do escape encoding
Throws:
URIException - If the URI cannot be created.
NullPointerException - if escaped is null
See Also:
getProtocolCharset()

URI

public URI(char[] escaped)
    throws URIException,
           NullPointerException
Deprecated. Use #URI(String, boolean)

Construct a URI as an escaped form of a character array. An URI can be placed within double-quotes or angle brackets like "http://test.com/" and <http://test.com/>

Parameters:
escaped - the URI character sequence
Throws:
URIException - If the URI cannot be created.
NullPointerException - if escaped is null
See Also:
getDefaultProtocolCharset()

URI

public URI(String original,
           String charset)
    throws URIException
Deprecated. Use #URI(String, boolean, String)

Construct a URI from the given string with the given charset.

Parameters:
original - the string to be represented to URI character sequence It is one of absoluteURI and relativeURI.
charset - the charset string to do escape encoding
Throws:
URIException - If the URI cannot be created.
See Also:
getProtocolCharset()

URI

public URI(String original)
    throws URIException
Deprecated. Use #URI(String, boolean)

Construct a URI from the given string.

   URI-reference = [ absoluteURI | relativeURI ] [ "#" fragment ]
 

An URI can be placed within double-quotes or angle brackets like "http://test.com/" and <http://test.com/>

Parameters:
original - the string to be represented to URI character sequence It is one of absoluteURI and relativeURI.
Throws:
URIException - If the URI cannot be created.
See Also:
getDefaultProtocolCharset()

URI

public URI(String scheme,
           String schemeSpecificPart,
           String fragment)
    throws URIException
Construct a general URI from the given components.

   URI-reference = [ absoluteURI | relativeURI ] [ "#" fragment ]
   absoluteURI   = scheme ":" ( hier_part | opaque_part )
   opaque_part   = uric_no_slash *uric
 

It's for absolute URI = <scheme>:<scheme-specific-part># <fragment>.

Parameters:
scheme - the scheme string
schemeSpecificPart - scheme_specific_part
fragment - the fragment string
Throws:
URIException - If the URI cannot be created.
See Also:
getDefaultProtocolCharset()

URI

public URI(String scheme,
           String authority,
           String path,
           String query,
           String fragment)
    throws URIException
Construct a general URI from the given components.

   URI-reference = [ absoluteURI | relativeURI ] [ "#" fragment ]
   absoluteURI   = scheme ":" ( hier_part | opaque_part )
   relativeURI   = ( net_path | abs_path | rel_path ) [ "?" query ]
   hier_part     = ( net_path | abs_path ) [ "?" query ]
 

It's for absolute URI = <scheme>:<path>?<query>#< fragment> and relative URI = <path>?<query>#<fragment >.

Parameters:
scheme - the scheme string
authority - the authority string
path - the path string
query - the query string
fragment - the fragment string
Throws:
URIException - If the new URI cannot be created.
See Also:
getDefaultProtocolCharset()

URI

public URI(String scheme,
           String userinfo,
           String host,
           int port)
    throws URIException
Construct a general URI from the given components.

Parameters:
scheme - the scheme string
userinfo - the userinfo string
host - the host string
port - the port number
Throws:
URIException - If the new URI cannot be created.
See Also:
getDefaultProtocolCharset()

URI

public URI(String scheme,
           String userinfo,
           String host,
           int port,
           String path)
    throws URIException
Construct a general URI from the given components.

Parameters:
scheme - the scheme string
userinfo - the userinfo string
host - the host string
port - the port number
path - the path string
Throws:
URIException - If the new URI cannot be created.
See Also:
getDefaultProtocolCharset()

URI

public URI(String scheme,
           String userinfo,
           String host,
           int port,
           String path,
           String query)
    throws URIException
Construct a general URI from the given components.

Parameters:
scheme - the scheme string
userinfo - the userinfo string
host - the host string
port - the port number
path - the path string
query - the query string
Throws:
URIException - If the new URI cannot be created.
See Also:
getDefaultProtocolCharset()

URI

public URI(String scheme,
           String userinfo,
           String host,
           int port,
           String path,
           String query,
           String fragment)
    throws URIException
Construct a general URI from the given components.

Parameters:
scheme - the scheme string
userinfo - the userinfo string
host - the host string
port - the port number
path - the path string
query - the query string
fragment - the fragment string
Throws:
URIException - If the new URI cannot be created.
See Also:
getDefaultProtocolCharset()

URI

public URI(String scheme,
           String host,
           String path,
           String fragment)
    throws URIException
Construct a general URI from the given components.

Parameters:
scheme - the scheme string
host - the host string
path - the path string
fragment - the fragment string
Throws:
URIException - If the new URI cannot be created.
See Also:
getDefaultProtocolCharset()

URI

public URI(URI base,
           String relative)
    throws URIException
Deprecated. Use #URI(URI, String, boolean)

Construct a general URI with the given relative URI string.

Parameters:
base - the base URI
relative - the relative URI string
Throws:
URIException - If the new URI cannot be created.

URI

public URI(URI base,
           String relative,
           boolean escaped)
    throws URIException
Construct a general URI with the given relative URI string.

Parameters:
base - the base URI
relative - the relative URI string
escaped - true if URI character sequence is in escaped form. false otherwise.
Throws:
URIException - If the new URI cannot be created.
Since:
3.0

URI

public URI(URI base,
           URI relative)
    throws URIException
Construct a general URI with the given relative URI.

   URI-reference = [ absoluteURI | relativeURI ] [ "#" fragment ]
   relativeURI   = ( net_path | abs_path | rel_path ) [ "?" query ]
 

Resolving Relative References to Absolute Form. Examples of Resolving Relative URI References Within an object with a well-defined base URI of

   http://a/b/c/d;p?q
 

the relative URI would be resolved as follows: Normal Examples

   g:h           =  g:h
   g             =  http://a/b/c/g
   ./g           =  http://a/b/c/g
   g/            =  http://a/b/c/g/
   /g            =  http://a/g
   //g           =  http://g
   ?y            =  http://a/b/c/?y
   g?y           =  http://a/b/c/g?y
   #s            =  (current document)#s
   g#s           =  http://a/b/c/g#s
   g?y#s         =  http://a/b/c/g?y#s
   ;x            =  http://a/b/c/;x
   g;x           =  http://a/b/c/g;x
   g;x?y#s       =  http://a/b/c/g;x?y#s
   .             =  http://a/b/c/
   ./            =  http://a/b/c/
   ..            =  http://a/b/
   ../           =  http://a/b/
   ../g          =  http://a/b/g
   ../..         =  http://a/
   ../../        =  http://a/ 
   ../../g       =  http://a/g
 

Some URI schemes do not allow a hierarchical syntax matching the syntax, and thus cannot use relative references.

Parameters:
base - the base URI
relative - the relative URI
Throws:
URIException - If the new URI cannot be created.
Method Detail

encode

protected static char[] encode(String original,
                               BitSet allowed,
                               String charset)
                        throws URIException
Encodes URI string. This is a two mapping, one from original characters to octets, and subsequently a second from octets to URI characters:

   original character sequence->octet sequence->URI character sequence
 

An escaped octet is encoded as a character triplet, consisting of the percent character "%" followed by the two hexadecimal digits representing the octet code. For example, "%20" is the escaped encoding for the US-ASCII space character.

Conversion from the local filesystem character set to UTF-8 will normally involve a two step process. First convert the local character set to the UCS; then convert the UCS to UTF-8. The first step in the process can be performed by maintaining a mapping table that includes the local character set code and the corresponding UCS code. The next step is to convert the UCS character code to the UTF-8 encoding.

Mapping between vendor codepages can be done in a very similar manner as described above.

The only time escape encodings can allowedly be made is when a URI is being created from its component parts. The escape and validate methods are internally performed within this method.

Parameters:
original - the original character sequence
allowed - those characters that are allowed within a component
charset - the protocol charset
Returns:
URI character sequence
Throws:
URIException - null component or unsupported character encoding

decode

protected static String decode(char[] component,
                               String charset)
                        throws URIException
Decodes URI encoded string. This is a two mapping, one from URI characters to octets, and subsequently a second from octets to original characters:

   URI character sequence->octet sequence->original character sequence
 

A URI must be separated into its components before the escaped characters within those components can be allowedly decoded.

Notice that there is a chance that URI characters that are non UTF-8 may be parsed as valid UTF-8. A recent non-scientific analysis found that EUC encoded Japanese words had a 2.7% false reading; SJIS had a 0.0005% false reading; other encoding such as ASCII or KOI-8 have a 0% false reading.

The percent "%" character always has the reserved purpose of being the escape indicator, it must be escaped as "%25" in order to be used as data within a URI.

The unescape method is internally performed within this method.

Parameters:
component - the URI character sequence
charset - the protocol charset
Returns:
original character sequence
Throws:
URIException - incomplete trailing escape pattern or unsupported character encoding

decode

protected static String decode(String component,
                               String charset)
                        throws URIException
Decodes URI encoded string. This is a two mapping, one from URI characters to octets, and subsequently a second from octets to original characters:

   URI character sequence->octet sequence->original character sequence
 

A URI must be separated into its components before the escaped characters within those components can be allowedly decoded.

Notice that there is a chance that URI characters that are non UTF-8 may be parsed as valid UTF-8. A recent non-scientific analysis found that EUC encoded Japanese words had a 2.7% false reading; SJIS had a 0.0005% false reading; other encoding such as ASCII or KOI-8 have a 0% false reading.

The percent "%" character always has the reserved purpose of being the escape indicator, it must be escaped as "%25" in order to be used as data within a URI.

The unescape method is internally performed within this method.

Parameters:
component - the URI character sequence
charset - the protocol charset
Returns:
original character sequence
Throws:
URIException - incomplete trailing escape pattern or unsupported character encoding
Since:
3.0

prevalidate

protected boolean prevalidate(String component,
                              BitSet disallowed)
Pre-validate the unescaped URI string within a specific component.

Parameters:
component - the component string within the component
disallowed - those characters disallowed within the component
Returns:
if true, it doesn't have the disallowed characters if false, the component is undefined or an incorrect one

validate

protected boolean validate(char[] component,
                           BitSet generous)
Validate the URI characters within a specific component. The component must be performed after escape encoding. Or it doesn't include escaped characters.

Parameters:
component - the characters sequence within the component
generous - those characters that are allowed within a component
Returns:
if true, it's the correct URI character sequence

validate

protected boolean validate(char[] component,
                           int soffset,
                           int eoffset,
                           BitSet generous)
Validate the URI characters within a specific component. The component must be performed after escape encoding. Or it doesn't include escaped characters.

It's not that much strict, generous. The strict validation might be performed before being called this method.

Parameters:
component - the characters sequence within the component
soffset - the starting offset of the given component
eoffset - the ending offset of the given component if -1, it means the length of the component
generous - those characters that are allowed within a component
Returns:
if true, it's the correct URI character sequence

parseUriReference

protected void parseUriReference(String original,
                                 boolean escaped)
                          throws URIException
In order to avoid any possilbity of conflict with non-ASCII characters, Parse a URI reference as a String with the character encoding of the local system or the document.

The following line is the regular expression for breaking-down a URI reference into its components.

   ^(([^:/?#]+):)?(//([^/?#]*))?([^?#]*)(\?([^#]*))?(#(.*))?
    12            3  4          5       6  7        8 9
 

For example, matching the above expression to http://jakarta.apache.org/ietf/uri/#Related results in the following subexpression matches:

               $1 = http:
  scheme    =  $2 = http
               $3 = //jakarta.apache.org
  authority =  $4 = jakarta.apache.org
  path      =  $5 = /ietf/uri/
               $6 = 
  query     =  $7 = 
               $8 = #Related
  fragment  =  $9 = Related
 

Parameters:
original - the original character sequence
escaped - true if original is escaped
Throws:
URIException - If an error occurs.

indexFirstOf

protected int indexFirstOf(String s,
                           String delims)
Get the earlier index that to be searched for the first occurrance in one of any of the given string.

Parameters:
s - the string to be indexed
delims - the delimiters used to index
Returns:
the earlier index if there are delimiters

indexFirstOf

protected int indexFirstOf(String s,
                           String delims,
                           int offset)
Get the earlier index that to be searched for the first occurrance in one of any of the given string.

Parameters:
s - the string to be indexed
delims - the delimiters used to index
offset - the from index
Returns:
the earlier index if there are delimiters

indexFirstOf

protected int indexFirstOf(char[] s,
                           char delim)
Get the earlier index that to be searched for the first occurrance in one of any of the given array.

Parameters:
s - the character array to be indexed
delim - the delimiter used to index
Returns:
the ealier index if there are a delimiter

indexFirstOf

protected int indexFirstOf(char[] s,
                           char delim,
                           int offset)
Get the earlier index that to be searched for the first occurrance in one of any of the given array.

Parameters:
s - the character array to be indexed
delim - the delimiter used to index
offset - The offset.
Returns:
the ealier index if there is a delimiter

parseAuthority

protected void parseAuthority(String original,
                              boolean escaped)
                       throws URIException
Parse the authority component.

Parameters:
original - the original character sequence of authority component
escaped - true if original is escaped
Throws:
URIException - If an error occurs.

setURI

protected void setURI()
Once it's parsed successfully, set this URI.

See Also:
getRawURI()

isAbsoluteURI

public boolean isAbsoluteURI()
Tell whether or not this URI is absolute.

Returns:
true iif this URI is absoluteURI

isRelativeURI

public boolean isRelativeURI()
Tell whether or not this URI is relative.

Returns:
true iif this URI is relativeURI

isHierPart

public boolean isHierPart()
Tell whether or not the absoluteURI of this URI is hier_part.

Returns:
true iif the absoluteURI is hier_part

isOpaquePart

public boolean isOpaquePart()
Tell whether or not the absoluteURI of this URI is opaque_part.

Returns:
true iif the absoluteURI is opaque_part

isNetPath

public boolean isNetPath()
Tell whether or not the relativeURI or heir_part of this URI is net_path. It's the same function as the has_authority() method.

Returns:
true iif the relativeURI or heir_part is net_path
See Also:
hasAuthority()

isAbsPath

public boolean isAbsPath()
Tell whether or not the relativeURI or hier_part of this URI is abs_path.

Returns:
true iif the relativeURI or hier_part is abs_path

isRelPath

public boolean isRelPath()
Tell whether or not the relativeURI of this URI is rel_path.

Returns:
true iif the relativeURI is rel_path

hasAuthority

public boolean hasAuthority()
Tell whether or not this URI has authority. It's the same function as the is_net_path() method.

Returns:
true iif this URI has authority
See Also:
isNetPath()

isRegName

public boolean isRegName()
Tell whether or not the authority component of this URI is reg_name.

Returns:
true iif the authority component is reg_name

isServer

public boolean isServer()
Tell whether or not the authority component of this URI is server.

Returns:
true iif the authority component is server

hasUserinfo

public boolean hasUserinfo()
Tell whether or not this URI has userinfo.

Returns:
true iif this URI has userinfo

isHostname

public boolean isHostname()
Tell whether or not the host part of this URI is hostname.

Returns:
true iif the host part is hostname

isIPv4address

public boolean isIPv4address()
Tell whether or not the host part of this URI is IPv4address.

Returns:
true iif the host part is IPv4address

isIPv6reference

public boolean isIPv6reference()
Tell whether or not the host part of this URI is IPv6reference.

Returns:
true iif the host part is IPv6reference

hasQuery

public boolean hasQuery()
Tell whether or not this URI has query.

Returns:
true iif this URI has query

hasFragment

public boolean hasFragment()
Tell whether or not this URI has fragment.

Returns:
true iif this URI has fragment

setDefaultProtocolCharset

public static void setDefaultProtocolCharset(String charset)
                                      throws URI.DefaultCharsetChanged
Set the default charset of the protocol.

The character set used to store files SHALL remain a local decision and MAY depend on the capability of local operating systems. Prior to the exchange of URIs they SHOULD be converted into a ISO/IEC 10646 format and UTF-8 encoded. This approach, while allowing international exchange of URIs, will still allow backward compatibility with older systems because the code set positions for ASCII characters are identical to the one byte sequence in UTF-8.

An individual URI scheme may require a single charset, define a default charset, or provide a way to indicate the charset used.

Always all the time, the setter method is always succeeded and throws DefaultCharsetChanged exception. So API programmer must follow the following way:

  import org.apache.util.URI$DefaultCharsetChanged;
      .
      .
      .
  try {
      URI.setDefaultProtocolCharset("UTF-8");
  } catch (DefaultCharsetChanged cc) {
      // CASE 1: the exception could be ignored, when it is set by user
      if (cc.getReasonCode() == DefaultCharsetChanged.PROTOCOL_CHARSET) {
      // CASE 2: let user know the default protocol charset changed
      } else {
      // CASE 2: let user know the default document charset changed
      }
  }
  
The API programmer is responsible to set the correct charset. And each application should remember its own charset to support.

Parameters:
charset - the default charset for each protocol
Throws:
URI.DefaultCharsetChanged - default charset changed

getDefaultProtocolCharset

public static String getDefaultProtocolCharset()
Get the default charset of the protocol.

An individual URI scheme may require a single charset, define a default charset, or provide a way to indicate the charset used.

To work globally either requires support of a number of character sets and to be able to convert between them, or the use of a single preferred character set. For support of global compatibility it is STRONGLY RECOMMENDED that clients and servers use UTF-8 encoding when exchanging URIs.

Returns:
the default charset string

getProtocolCharset

public String getProtocolCharset()
Get the protocol charset used by this current URI instance. It was set by the constructor for this instance. If it was not set by contructor, it will return the default protocol charset.

Returns:
the protocol charset string
See Also:
getDefaultProtocolCharset()

setDefaultDocumentCharset

public static void setDefaultDocumentCharset(String charset)
                                      throws URI.DefaultCharsetChanged
Set the default charset of the document.

Notice that it will be possible to contain mixed characters (e.g. ftp://host/KoreanNamespace/ChineseResource). To handle the Bi-directional display of these character sets, the protocol charset could be simply used again. Because it's not yet implemented that the insertion of BIDI control characters at different points during composition is extracted.

Always all the time, the setter method is always succeeded and throws DefaultCharsetChanged exception. So API programmer must follow the following way:

  import org.apache.util.URI$DefaultCharsetChanged;
      .
      .
      .
  try {
      URI.setDefaultDocumentCharset("EUC-KR");
  } catch (DefaultCharsetChanged cc) {
      // CASE 1: the exception could be ignored, when it is set by user
      if (cc.getReasonCode() == DefaultCharsetChanged.DOCUMENT_CHARSET) {
      // CASE 2: let user know the default document charset changed
      } else {
      // CASE 2: let user know the default protocol charset changed
      }
  }
  
The API programmer is responsible to set the correct charset. And each application should remember its own charset to support.

Parameters:
charset - the default charset for the document
Throws:
URI.DefaultCharsetChanged - default charset changed

getDefaultDocumentCharset

public static String getDefaultDocumentCharset()
Get the recommended default charset of the document.

Returns:
the default charset string

getDefaultDocumentCharsetByLocale

public static String getDefaultDocumentCharsetByLocale()
Get the default charset of the document by locale.

Returns:
the default charset string by locale

getDefaultDocumentCharsetByPlatform

public static String getDefaultDocumentCharsetByPlatform()
Get the default charset of the document by platform.

Returns:
the default charset string by platform

getRawScheme

public char[] getRawScheme()
Get the scheme.

Returns:
the scheme

getScheme

public String getScheme()
Get the scheme.

Returns:
the scheme null if undefined scheme

setRawAuthority

public void setRawAuthority(char[] escapedAuthority)
                     throws URIException,
                            NullPointerException
Set the authority. It can be one type of server, hostport, hostname, IPv4address, IPv6reference and reg_name.

   authority     = server | reg_name
 

Parameters:
escapedAuthority - the raw escaped authority
Throws:
URIException - If parseAuthority(java.lang.String,boolean) fails
NullPointerException - null authority

setEscapedAuthority

public void setEscapedAuthority(String escapedAuthority)
                         throws URIException
Set the authority. It can be one type of server, hostport, hostname, IPv4address, IPv6reference and reg_name. Note that there is no setAuthority method by the escape encoding reason.

Parameters:
escapedAuthority - the escaped authority string
Throws:
URIException - If parseAuthority(java.lang.String,boolean) fails

getRawAuthority

public char[] getRawAuthority()
Get the raw-escaped authority.

Returns:
the raw-escaped authority

getEscapedAuthority

public String getEscapedAuthority()
Get the escaped authority.

Returns:
the escaped authority

getAuthority

public String getAuthority()
                    throws URIException
Get the authority.

Returns:
the authority
Throws:
URIException - If decode(char[], java.lang.String) fails

getRawUserinfo

public char[] getRawUserinfo()
Get the raw-escaped userinfo.

Returns:
the raw-escaped userinfo
See Also:
getAuthority()

getEscapedUserinfo

public String getEscapedUserinfo()
Get the escaped userinfo.

Returns:
the escaped userinfo
See Also:
getAuthority()

getUserinfo

public String getUserinfo()
                   throws URIException
Get the userinfo.

Returns:
the userinfo
Throws:
URIException - If decode(char[], java.lang.String) fails
See Also:
getAuthority()

getRawHost

public char[] getRawHost()
Get the host.

   host          = hostname | IPv4address | IPv6reference
 

Returns:
the host
See Also:
getAuthority()

getHost

public String getHost()
               throws URIException
Get the host.

   host          = hostname | IPv4address | IPv6reference
 

Returns:
the host
Throws:
URIException - If decode(char[], java.lang.String) fails
See Also:
getAuthority()

getPort

public int getPort()
Get the port. In order to get the specfic default port, the specific protocol-supported class extended from the URI class should be used. It has the server-based naming authority.

Returns:
the port if -1, it has the default port for the scheme or the server-based naming authority is not supported in the specific URI.

setRawPath

public void setRawPath(char[] escapedPath)
                throws URIException
Set the raw-escaped path.

Parameters:
escapedPath - the path character sequence
Throws:
URIException - encoding error or not proper for initial instance
See Also:
encode(java.lang.String, java.util.BitSet, java.lang.String)

setEscapedPath

public void setEscapedPath(String escapedPath)
                    throws URIException
Set the escaped path.

Parameters:
escapedPath - the escaped path string
Throws:
URIException - encoding error or not proper for initial instance
See Also:
encode(java.lang.String, java.util.BitSet, java.lang.String)

setPath

public void setPath(String path)
             throws URIException
Set the path.

Parameters:
path - the path string
Throws:
URIException - set incorrectly or fragment only
See Also:
encode(java.lang.String, java.util.BitSet, java.lang.String)

resolvePath

protected char[] resolvePath(char[] basePath,
                             char[] relPath)
                      throws URIException
Resolve the base and relative path.

Parameters:
basePath - a character array of the basePath
relPath - a character array of the relPath
Returns:
the resolved path
Throws:
URIException - no more higher path level to be resolved

getRawCurrentHierPath

protected char[] getRawCurrentHierPath(char[] path)
                                throws URIException
Get the raw-escaped current hierarchy level in the given path. If the last namespace is a collection, the slash mark ('/') should be ended with at the last character of the path string.

Parameters:
path - the path
Returns:
the current hierarchy level
Throws:
URIException - no hierarchy level

getRawCurrentHierPath

public char[] getRawCurrentHierPath()
                             throws URIException
Get the raw-escaped current hierarchy level.

Returns:
the raw-escaped current hierarchy level
Throws:
URIException - If getRawCurrentHierPath(char[]) fails.

getEscapedCurrentHierPath

public String getEscapedCurrentHierPath()
                                 throws URIException
Get the escaped current hierarchy level.

Returns:
the escaped current hierarchy level
Throws:
URIException - If getRawCurrentHierPath(char[]) fails.

getCurrentHierPath

public String getCurrentHierPath()
                          throws URIException
Get the current hierarchy level.

Returns:
the current hierarchy level
Throws:
URIException - If getRawCurrentHierPath(char[]) fails.
See Also:
decode(char[], java.lang.String)

getRawAboveHierPath

public char[] getRawAboveHierPath()
                           throws URIException
Get the level above the this hierarchy level.

Returns:
the raw above hierarchy level
Throws:
URIException - If getRawCurrentHierPath(char[]) fails.

getEscapedAboveHierPath

public String getEscapedAboveHierPath()
                               throws URIException
Get the level above the this hierarchy level.

Returns:
the raw above hierarchy level
Throws:
URIException - If getRawCurrentHierPath(char[]) fails.

getAboveHierPath

public String getAboveHierPath()
                        throws URIException
Get the level above the this hierarchy level.

Returns:
the above hierarchy level
Throws:
URIException - If getRawCurrentHierPath(char[]) fails.
See Also:
decode(char[], java.lang.String)

getRawPath

public char[] getRawPath()
Get the raw-escaped path.

   path          = [ abs_path | opaque_part ]
 

Returns:
the raw-escaped path

getEscapedPath

public String getEscapedPath()
Get the escaped path.

   path          = [ abs_path | opaque_part ]
   abs_path      = "/"  path_segments 
   opaque_part   = uric_no_slash *uric
 

Returns:
the escaped path string

getPath

public String getPath()
               throws URIException
Get the path.

   path          = [ abs_path | opaque_part ]
 

Returns:
the path string
Throws:
URIException - If decode(char[], java.lang.String) fails.
See Also:
decode(char[], java.lang.String)

getRawName

public char[] getRawName()
Get the raw-escaped basename of the path.

Returns:
the raw-escaped basename

getEscapedName

public String getEscapedName()
Get the escaped basename of the path.

Returns:
the escaped basename string

getName

public String getName()
               throws URIException
Get the basename of the path.

Returns:
the basename string
Throws:
URIException - incomplete trailing escape pattern or unsupported character encoding
See Also:
decode(char[], java.lang.String)

getRawPathQuery

public char[] getRawPathQuery()
Get the raw-escaped path and query.

Returns:
the raw-escaped path and query

getEscapedPathQuery

public String getEscapedPathQuery()
Get the escaped query.

Returns:
the escaped path and query string

getPathQuery

public String getPathQuery()
                    throws URIException
Get the path and query.

Returns:
the path and query string.
Throws:
URIException - incomplete trailing escape pattern or unsupported character encoding
See Also:
decode(char[], java.lang.String)

setRawQuery

public void setRawQuery(char[] escapedQuery)
                 throws URIException
Set the raw-escaped query.

Parameters:
escapedQuery - the raw-escaped query
Throws:
URIException - escaped query not valid

setEscapedQuery

public void setEscapedQuery(String escapedQuery)
                     throws URIException
Set the escaped query string.

Parameters:
escapedQuery - the escaped query string
Throws:
URIException - escaped query not valid

setQuery

public void setQuery(String query)
              throws URIException
Set the query.

When a query string is not misunderstood the reserved special characters ("&", "=", "+", ",", and "$") within a query component, it is recommended to use in encoding the whole query with this method.

The additional APIs for the special purpose using by the reserved special characters used in each protocol are implemented in each protocol classes inherited from URI. So refer to the same-named APIs implemented in each specific protocol instance.

Parameters:
query - the query string.
Throws:
URIException - incomplete trailing escape pattern or unsupported character encoding
See Also:
encode(java.lang.String, java.util.BitSet, java.lang.String)

getRawQuery

public char[] getRawQuery()
Get the raw-escaped query.

Returns:
the raw-escaped query

getEscapedQuery

public String getEscapedQuery()
Get the escaped query.

Returns:
the escaped query string

getQuery

public String getQuery()
                throws URIException
Get the query.

Returns:
the query string.
Throws:
URIException - incomplete trailing escape pattern or unsupported character encoding
See Also:
decode(char[], java.lang.String)

setRawFragment

public void setRawFragment(char[] escapedFragment)
                    throws URIException
Set the raw-escaped fragment.

Parameters:
escapedFragment - the raw-escaped fragment
Throws:
URIException - escaped fragment not valid

setEscapedFragment

public void setEscapedFragment(String escapedFragment)
                        throws URIException
Set the escaped fragment string.

Parameters:
escapedFragment - the escaped fragment string
Throws:
URIException - escaped fragment not valid

setFragment

public void setFragment(String fragment)
                 throws URIException
Set the fragment.

Parameters:
fragment - the fragment string.
Throws:
URIException - If an error occurs.

getRawFragment

public char[] getRawFragment()
Get the raw-escaped fragment.

The optional fragment identifier is not part of a URI, but is often used in conjunction with a URI.

The format and interpretation of fragment identifiers is dependent on the media type [RFC2046] of the retrieval result.

A fragment identifier is only meaningful when a URI reference is intended for retrieval and the result of that retrieval is a document for which the identified fragment is consistently defined.

Returns:
the raw-escaped fragment

getEscapedFragment

public String getEscapedFragment()
Get the escaped fragment.

Returns:
the escaped fragment string

getFragment

public String getFragment()
                   throws URIException
Get the fragment.

Returns:
the fragment string
Throws:
URIException - incomplete trailing escape pattern or unsupported character encoding
See Also:
decode(char[], java.lang.String)

removeFragmentIdentifier

protected char[] removeFragmentIdentifier(char[] component)
Remove the fragment identifier of the given component.

Parameters:
component - the component that a fragment may be included
Returns:
the component that the fragment identifier is removed

normalize

protected char[] normalize(char[] path)
                    throws URIException
Normalize the given hier path part.

Algorithm taken from URI reference parser at http://www.apache.org/~fielding/uri/rev-2002/issues.html.

Parameters:
path - the path to normalize
Returns:
the normalized path
Throws:
URIException - no more higher path level to be normalized

normalize

public void normalize()
               throws URIException
Normalizes the path part of this URI. Normalization is only meant to be performed on URIs with an absolute path. Calling this method on a relative path URI will have no effect.

Throws:
URIException - no more higher path level to be normalized
See Also:
isAbsPath()

equals

protected boolean equals(char[] first,
                         char[] second)
Test if the first array is equal to the second array.

Parameters:
first - the first character array
second - the second character array
Returns:
true if they're equal

equals

public boolean equals(Object obj)
Test an object if this URI is equal to another.

Overrides:
equals in class Object
Parameters:
obj - an object to compare
Returns:
true if two URI objects are equal

hashCode

public int hashCode()
Return a hash code for this URI.

Overrides:
hashCode in class Object
Returns:
a has code value for this URI

compareTo

public int compareTo(Object obj)
              throws ClassCastException
Compare this URI to another object.

Specified by:
compareTo in interface Comparable
Parameters:
obj - the object to be compared.
Returns:
0, if it's same, -1, if failed, first being compared with in the authority component
Throws:
ClassCastException - not URI argument

clone

public Object clone()
             throws CloneNotSupportedException
Create and return a copy of this object, the URI-reference containing the userinfo component. Notice that the whole URI-reference including the userinfo component counld not be gotten as a String.

To copy the identical URI object including the userinfo component, it should be used.

Overrides:
clone in class Object
Returns:
a clone of this instance
Throws:
CloneNotSupportedException

getRawURI

public char[] getRawURI()
It can be gotten the URI character sequence. It's raw-escaped. For the purpose of the protocol to be transported, it will be useful.

It is clearly unwise to use a URL that contains a password which is intended to be secret. In particular, the use of a password within the 'userinfo' component of a URL is strongly disrecommended except in those rare cases where the 'password' parameter is intended to be public.

When you want to get each part of the userinfo, you need to use the specific methods in the specific URL. It depends on the specific URL.

Returns:
the URI character sequence

getEscapedURI

public String getEscapedURI()
It can be gotten the URI character sequence. It's escaped. For the purpose of the protocol to be transported, it will be useful.

Returns:
the escaped URI string

getURI

public String getURI()
              throws URIException
It can be gotten the URI character sequence.

Returns:
the original URI string
Throws:
URIException - incomplete trailing escape pattern or unsupported character encoding
See Also:
decode(char[], java.lang.String)

getRawURIReference

public char[] getRawURIReference()
Get the URI reference character sequence.

Returns:
the URI reference character sequence

getEscapedURIReference

public String getEscapedURIReference()
Get the escaped URI reference string.

Returns:
the escaped URI reference string

getURIReference

public String getURIReference()
                       throws URIException
Get the original URI reference string.

Returns:
the original URI reference string
Throws:
URIException - If decode(char[], java.lang.String) fails.

toString

public String toString()
Get the escaped URI string.

On the document, the URI-reference form is only used without the userinfo component like http://jakarta.apache.org/ by the security reason. But the URI-reference form with the userinfo component could be parsed.

In other words, this URI and any its subclasses must not expose the URI-reference expression with the userinfo component like http://user:password@hostport/restricted_zone.
It means that the API client programmer should extract each user and password to access manually. Probably it will be supported in the each subclass, however, not a whole URI-reference expression.

Overrides:
toString in class Object
Returns:
the escaped URI string
See Also:
clone()


Copyright © 2001-2008 Apache Software Foundation. All Rights Reserved.