The following document contains the results of Checkstyle 7.2 with google_checks.xml ruleset.
Category | Rule | Violations | Severity |
---|---|---|---|
blocks | EmptyCatchBlock
|
1 | ![]() |
LeftCurly
|
5 | ![]() | |
NeedBraces | 22 | ![]() | |
RightCurly
|
15 | ![]() | |
RightCurly | 15 | ![]() | |
coding | OverloadMethodsDeclarationOrder | 3 | ![]() |
imports | CustomImportOrder
|
22 | ![]() |
indentation | CommentsIndentation | 1 | ![]() |
Indentation
|
105 | ![]() | |
javadoc | AtclauseOrder
|
1 | ![]() |
JavadocMethod
|
7 | ![]() | |
JavadocParagraph | 9 | ![]() | |
NonEmptyAtclauseDescription | 56 | ![]() | |
SummaryJavadoc
|
72 | ![]() | |
modifier | ModifierOrder | 3 | ![]() |
naming | AbbreviationAsWordInName
|
3 | ![]() |
CatchParameterName
|
14 | ![]() | |
LocalVariableName
|
6 | ![]() | |
ParameterName
|
17 | ![]() | |
sizes | LineLength
|
116 | ![]() |
whitespace | EmptyLineSeparator
|
8 | ![]() |
WhitespaceAround
|
159 | ![]() |
Severity | Category | Rule | Message | Line |
---|---|---|---|---|
![]() |
imports | CustomImportOrder | Import statement for 'com.fasterxml.jackson.annotation.JsonAnyGetter' is in the wrong order. Should be in the 'THIRD_PARTY_PACKAGE' group, expecting not assigned imports on this line. | 9 |
![]() |
imports | CustomImportOrder | Import statement for 'com.fasterxml.jackson.annotation.JsonAnySetter' is in the wrong order. Should be in the 'THIRD_PARTY_PACKAGE' group, expecting not assigned imports on this line. | 10 |
![]() |
imports | CustomImportOrder | Import statement for 'com.fasterxml.jackson.annotation.JsonIgnore' is in the wrong order. Should be in the 'THIRD_PARTY_PACKAGE' group, expecting not assigned imports on this line. | 11 |
![]() |
imports | CustomImportOrder | Import statement for 'com.fasterxml.jackson.annotation.JsonInclude' is in the wrong order. Should be in the 'THIRD_PARTY_PACKAGE' group, expecting not assigned imports on this line. | 12 |
![]() |
imports | CustomImportOrder | Import statement for 'com.fasterxml.jackson.annotation.JsonProperty' is in the wrong order. Should be in the 'THIRD_PARTY_PACKAGE' group, expecting not assigned imports on this line. | 13 |
![]() |
imports | CustomImportOrder | Import statement for 'com.fasterxml.jackson.annotation.JsonPropertyOrder' is in the wrong order. Should be in the 'THIRD_PARTY_PACKAGE' group, expecting not assigned imports on this line. | 14 |
![]() |
imports | CustomImportOrder | Import statement for 'org.apache.commons.lang3.builder.EqualsBuilder' is in the wrong order. Should be in the 'THIRD_PARTY_PACKAGE' group, expecting not assigned imports on this line. | 15 |
![]() |
imports | CustomImportOrder | Import statement for 'org.apache.commons.lang3.builder.HashCodeBuilder' is in the wrong order. Should be in the 'THIRD_PARTY_PACKAGE' group, expecting not assigned imports on this line. | 16 |
![]() |
imports | CustomImportOrder | Import statement for 'org.apache.commons.lang3.builder.ToStringBuilder' is in the wrong order. Should be in the 'THIRD_PARTY_PACKAGE' group, expecting not assigned imports on this line. | 17 |
![]() |
imports | CustomImportOrder | Import statement for 'org.apache.streams.config.StreamsConfiguration' is in the wrong order. Should be in the 'THIRD_PARTY_PACKAGE' group, expecting not assigned imports on this line. | 18 |
![]() |
imports | CustomImportOrder | Import statement for 'org.apache.streams.local.monitoring.MonitoringConfiguration' is in the wrong order. Should be in the 'THIRD_PARTY_PACKAGE' group, expecting not assigned imports on this line. | 19 |
![]() |
indentation | Indentation | '}' have incorrect indentation level 0, expected level should be 4. | 31 |
![]() |
blocks | LeftCurly | '{' at column 1 should be on the previous line. | 35 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 37 |
![]() |
javadoc | JavadocParagraph | <p> tag should be placed immediately before the first word, with no space after. | 39 |
![]() |
javadoc | JavadocParagraph | <p> tag should be preceded with an empty line. | 39 |
![]() |
indentation | Indentation | 'member def modifier' have incorrect indentation level 4, expected level should be 2. | 43 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 46 |
![]() |
indentation | Indentation | 'member def modifier' have incorrect indentation level 4, expected level should be 2. | 50 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 52 |
![]() |
indentation | Indentation | 'member def modifier' have incorrect indentation level 4, expected level should be 2. | 56 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 58 |
![]() |
indentation | Indentation | 'member def modifier' have incorrect indentation level 4, expected level should be 2. | 62 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 64 |
![]() |
indentation | Indentation | 'member def modifier' have incorrect indentation level 4, expected level should be 2. | 68 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 70 |
![]() |
indentation | Indentation | 'member def modifier' have incorrect indentation level 4, expected level should be 2. | 74 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 76 |
![]() |
indentation | Indentation | 'member def modifier' have incorrect indentation level 4, expected level should be 2. | 80 |
![]() |
indentation | Indentation | 'member def modifier' have incorrect indentation level 4, expected level should be 2. | 82 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 85 |
![]() |
javadoc | JavadocParagraph | <p> tag should be placed immediately before the first word, with no space after. | 87 |
![]() |
javadoc | JavadocParagraph | <p> tag should be preceded with an empty line. | 87 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 93 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 95 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 96 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 98 |
![]() |
javadoc | JavadocParagraph | <p> tag should be placed immediately before the first word, with no space after. | 100 |
![]() |
javadoc | JavadocParagraph | <p> tag should be preceded with an empty line. | 100 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 106 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 108 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 109 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 111 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 112 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 113 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 114 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 116 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 122 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 124 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 125 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 127 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 133 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 135 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 136 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 138 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 139 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 140 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 141 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 143 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 149 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 151 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 152 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 154 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 160 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 162 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 163 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 165 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 166 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 167 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 168 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 170 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 176 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 178 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 179 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 181 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 187 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 189 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 190 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 192 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 193 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 194 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 195 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 197 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 203 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 205 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 206 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 208 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 214 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 216 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 217 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 219 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 220 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 221 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 222 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 224 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 230 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 232 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 233 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 235 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 241 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 243 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 244 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 246 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 247 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 248 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 249 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 251 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 257 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 259 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 260 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 262 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 268 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 270 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 271 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 273 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 274 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 275 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 276 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 278 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 280 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 281 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 283 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 285 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 286 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 288 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 290 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 291 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 293 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 294 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 295 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 296 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 298 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 300 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 268). | 300 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 301 |
![]() |
indentation | Indentation | 'method def modifier' have incorrect indentation level 4, expected level should be 2. | 303 |
![]() |
indentation | Indentation | 'if' have incorrect indentation level 8, expected level should be 4. | 305 |
![]() |
indentation | Indentation | 'if' child have incorrect indentation level 12, expected level should be 6. | 306 |
![]() |
indentation | Indentation | 'if rcurly' have incorrect indentation level 8, expected level should be 4. | 307 |
![]() |
indentation | Indentation | 'if' have incorrect indentation level 8, expected level should be 4. | 308 |
![]() |
indentation | Indentation | 'if' child have incorrect indentation level 12, expected level should be 6. | 309 |
![]() |
indentation | Indentation | 'if rcurly' have incorrect indentation level 8, expected level should be 4. | 310 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 311 |
![]() |
indentation | Indentation | 'method def' child have incorrect indentation level 8, expected level should be 4. | 312 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 458). | 312 |
![]() |
indentation | Indentation | 'method def rcurly' have incorrect indentation level 4, expected level should be 2. | 313 |
Severity | Category | Rule | Message | Line |
---|---|---|---|---|
![]() |
imports | CustomImportOrder | Wrong lexicographical order for 'com.fasterxml.jackson.databind.ObjectMapper' import. Should be before 'org.apache.streams.monitoring.tasks.BroadcastMonitorThread'. | 41 |
![]() |
imports | CustomImportOrder | Import statement for 'com.google.common.util.concurrent.Uninterruptibles' is in the wrong order. Should be in the 'SPECIAL_IMPORTS' group, expecting group 'STANDARD_JAVA_PACKAGE' on this line. | 42 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 122). | 58 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 116). | 59 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 111). | 60 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 91 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 118). | 95 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 98 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 103). | 99 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 100 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 106). | 109 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 105). | 121 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 124 |
![]() |
blocks | NeedBraces | 'if' construct must use '{}'s. | 133 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 133 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 117). | 134 |
![]() |
blocks | NeedBraces | 'if' construct must use '{}'s. | 135 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 135 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 106). | 136 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 137 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 106). | 139 |
![]() |
blocks | NeedBraces | 'if' construct must use '{}'s. | 140 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 140 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 150). | 141 |
![]() |
javadoc | JavadocMethod | Missing a Javadoc comment. | 146 |
![]() |
javadoc | JavadocMethod | Missing a Javadoc comment. | 155 |
![]() |
blocks | NeedBraces | 'if' construct must use '{}'s. | 176 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 176 |
![]() |
blocks | NeedBraces | 'if' construct must use '{}'s. | 186 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 186 |
![]() |
blocks | NeedBraces | 'if' construct must use '{}'s. | 196 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 196 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 110). | 202 |
![]() |
blocks | NeedBraces | 'if' construct must use '{}'s. | 206 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 206 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 115). | 213 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 101). | 219 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 119). | 223 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 177). | 225 |
![]() |
blocks | NeedBraces | 'if' construct must use '{}'s. | 229 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 229 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 124). | 235 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 174). | 237 |
![]() |
blocks | NeedBraces | 'if' construct must use '{}'s. | 241 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 241 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'while' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 268 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 107). | 269 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 271 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 274 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 276 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 277 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 283 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 112). | 284 |
![]() |
naming | CatchParameterName | Catch parameter name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 288 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '{' is not preceded with whitespace. | 288 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'finally' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 291 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '{' is not preceded with whitespace. | 291 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 102). | 293 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 312 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 313 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 315 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 108). | 323 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 323 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '{' is not preceded with whitespace. | 323 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 106). | 326 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 326 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '{' is not preceded with whitespace. | 326 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'catch' is not preceded with whitespace. | 329 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '}' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 329 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 343 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 153). | 347 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 347 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 102). | 349 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 151). | 351 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 351 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 358 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 113). | 361 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 365 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 108). | 366 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 373 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 113). | 376 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 377 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '=' is not preceded with whitespace. | 377 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '=' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 377 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 383 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 110). | 384 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 113). | 394 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 398 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 123). | 400 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 402 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 404 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 407 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 408 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 413 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 414 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 416 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 420 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'while' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 422 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 427 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 434 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 435 |
![]() |
naming | CatchParameterName | Catch parameter name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 454 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 459 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'catch' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 462 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 470 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 472 |
![]() |
blocks | RightCurly | '}' at column 7 should be on the same line as the next part of a multi-block statement (one that directly contains multiple blocks: if/else-if/else, do/while or try/catch/finally). | 474 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 475 |
![]() |
blocks | RightCurly | '}' at column 7 should be on the same line as the next part of a multi-block statement (one that directly contains multiple blocks: if/else-if/else, do/while or try/catch/finally). | 477 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 101). | 479 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '+' is not preceded with whitespace. | 479 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '+' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 479 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '+' is not preceded with whitespace. | 479 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '+' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 479 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 487 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 104). | 488 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '+' is not preceded with whitespace. | 488 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '+' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 488 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '+' is not preceded with whitespace. | 488 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '+' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 488 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 489 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '+' is not preceded with whitespace. | 490 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '+' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 490 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 102). | 495 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 501 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 502 |
Severity | Category | Rule | Message | Line |
---|---|---|---|---|
![]() |
sizes | LineLength | Line is longer than 100 characters (found 120). | 48 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 72 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 74 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 75 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 117). | 77 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 85 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 87 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 88 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 89 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 90 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 128). | 92 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 103 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 105 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 106 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 107 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 119). | 109 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 116 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 118 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 119 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 120 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 121 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 151). | 123 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 132 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 134 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 135 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 136 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 137 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 152). | 139 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 110). | 155 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 171 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 179 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 187 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 195 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 197 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 113). | 204 |
![]() |
javadoc | AtclauseOrder | At-clauses have to appear in the order '[@param, @return, @throws, @deprecated]'. | 208 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 102). | 208 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 212 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 213 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 111). | 214 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 216 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 222 |
![]() |
blocks | RightCurly | '}' at column 5 should be on the same line as the next part of a multi-block statement (one that directly contains multiple blocks: if/else-if/else, do/while or try/catch/finally). | 226 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 227 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 228 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 111). | 229 |
![]() |
blocks | RightCurly | '}' at column 5 should be on the same line as the next part of a multi-block statement (one that directly contains multiple blocks: if/else-if/else, do/while or try/catch/finally). | 235 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 236 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 238 |
![]() |
blocks | NeedBraces | 'if' construct must use '{}'s. | 243 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 243 |
![]() |
blocks | NeedBraces | 'if' construct must use '{}'s. | 245 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 245 |
![]() |
blocks | NeedBraces | 'else' construct must use '{}'s. | 247 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 250 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 253 |
![]() |
blocks | RightCurly | '}' at column 5 should be on the same line as the next part of a multi-block statement (one that directly contains multiple blocks: if/else-if/else, do/while or try/catch/finally). | 256 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 261 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 272 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 274 |
![]() |
naming | ParameterName | Parameter name 'o' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 286 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 291 |
![]() |
blocks | RightCurly | '}' at column 5 should be on the same line as the next part of a multi-block statement (one that directly contains multiple blocks: if/else-if/else, do/while or try/catch/finally). | 293 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 294 |
![]() |
blocks | RightCurly | '}' at column 5 should be on the same line as the next part of a multi-block statement (one that directly contains multiple blocks: if/else-if/else, do/while or try/catch/finally). | 296 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 297 |
![]() |
blocks | RightCurly | '}' at column 5 should be on the same line as the next part of a multi-block statement (one that directly contains multiple blocks: if/else-if/else, do/while or try/catch/finally). | 299 |
Severity | Category | Rule | Message | Line |
---|---|---|---|---|
![]() |
whitespace | EmptyLineSeparator | 'package' should be separated from previous statement. | 18 |
![]() |
imports | CustomImportOrder | Wrong lexicographical order for 'net.jcip.annotations.ThreadSafe' import. Should be before 'org.apache.streams.util.ComponentUtils'. | 23 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 29 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '{' is not preceded with whitespace. | 33 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 125). | 35 |
![]() |
javadoc | JavadocMethod | Missing a Javadoc comment. | 45 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 107). | 48 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 72 |
Severity | Category | Rule | Message | Line |
---|---|---|---|---|
![]() |
whitespace | EmptyLineSeparator | 'package' should be separated from previous statement. | 18 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 20 |
![]() |
naming | AbbreviationAsWordInName | Abbreviation in name 'DatumStatusCounterMXBean' must contain no more than '1' capital letters. | 23 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 25 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 31 |
Severity | Category | Rule | Message | Line |
---|---|---|---|---|
![]() |
whitespace | EmptyLineSeparator | 'package' should be separated from previous statement. | 18 |
![]() |
imports | CustomImportOrder | Wrong lexicographical order for 'net.jcip.annotations.GuardedBy' import. Should be before 'org.apache.streams.util.ComponentUtils'. | 23 |
![]() |
imports | CustomImportOrder | Wrong lexicographical order for 'net.jcip.annotations.ThreadSafe' import. Should be before 'org.apache.streams.util.ComponentUtils'. | 24 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 30 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 131). | 36 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 46 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 48 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 54 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 56 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 67 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 74 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 76 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 82 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 89 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 91 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 97 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 104 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 106 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 112 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 114 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 118 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 127 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 152 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 154 |
Severity | Category | Rule | Message | Line |
---|---|---|---|---|
![]() |
whitespace | EmptyLineSeparator | 'package' should be separated from previous statement. | 18 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 20 |
![]() |
naming | AbbreviationAsWordInName | Abbreviation in name 'StreamsTaskCounterMXBean' must contain no more than '1' capital letters. | 23 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 151). | 26 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 44 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 115). | 45 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 108). | 52 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 53 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 104). | 58 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 59 |
Severity | Category | Rule | Message | Line |
---|---|---|---|---|
![]() |
sizes | LineLength | Line is longer than 100 characters (found 119). | 31 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 122). | 36 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 116). | 42 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 141). | 44 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 112). | 46 |
![]() |
naming | ParameterName | Parameter name 'r' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 53 |
![]() |
naming | ParameterName | Parameter name 't' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 53 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 54 |
Severity | Category | Rule | Message | Line |
---|---|---|---|---|
![]() |
whitespace | EmptyLineSeparator | 'package' should be separated from previous statement. | 18 |
![]() |
imports | CustomImportOrder | Wrong lexicographical order for 'org.apache.commons.lang.NotImplementedException' import. Should be before 'org.apache.streams.local.builders.LocalStreamBuilder'. | 22 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 105). | 43 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 102). | 44 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 103). | 48 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 128). | 53 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 66 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 73 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 75 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 76 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 82 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 91 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 93 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 94 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 95 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 110 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 112 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 113 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 114 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 120 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 122 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 123 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 101). | 134 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 104). | 151 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 139). | 154 |
![]() |
naming | CatchParameterName | Catch parameter name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 154 |
![]() |
naming | ParameterName | Parameter name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 162 |
![]() |
naming | ParameterName | Parameter name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 171 |
![]() |
naming | ParameterName | Parameter name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 180 |
![]() |
coding | OverloadMethodsDeclarationOrder | Overload methods should not be split. Previous overloaded method located at line '170'. | 185 |
![]() |
naming | ParameterName | Parameter name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 186 |
![]() |
naming | LocalVariableName | Local variable name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 196 |
![]() |
naming | LocalVariableName | Local variable name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 203 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 204 |
![]() |
naming | ParameterName | Parameter name 'o' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 217 |
![]() |
naming | ParameterName | Parameter name 'o' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 226 |
![]() |
naming | ParameterName | Parameter name 'c' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 235 |
![]() |
naming | ParameterName | Parameter name 'c' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 240 |
![]() |
coding | OverloadMethodsDeclarationOrder | Overload methods should not be split. Previous overloaded method located at line '216'. | 244 |
![]() |
naming | LocalVariableName | Local variable name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 246 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 247 |
![]() |
coding | OverloadMethodsDeclarationOrder | Overload methods should not be split. Previous overloaded method located at line '201'. | 254 |
![]() |
naming | LocalVariableName | Local variable name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 256 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 257 |
![]() |
naming | LocalVariableName | Local variable name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 271 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 272 |
![]() |
naming | ParameterName | Parameter name 'a' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 299 |
![]() |
naming | ParameterName | Parameter name 'c' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 304 |
![]() |
naming | ParameterName | Parameter name 'c' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 309 |
![]() |
naming | ParameterName | Parameter name 'c' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 314 |
![]() |
naming | ParameterName | Parameter name 'c' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 319 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 114). | 334 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 118). | 335 |
![]() |
naming | LocalVariableName | Local variable name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 355 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 105). | 383 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 388 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 401 |
![]() |
naming | ParameterName | Parameter name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 405 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 406 |
![]() |
blocks | NeedBraces | 'if' construct must use '{}'s. | 424 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 431 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 434 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 456 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 466 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 468 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 469 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 473 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 475 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 477 |
Severity | Category | Rule | Message | Line |
---|---|---|---|---|
![]() |
whitespace | EmptyLineSeparator | 'package' should be separated from previous statement. | 18 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 20 |
![]() |
naming | AbbreviationAsWordInName | Abbreviation in name 'ThroughputQueueMXBean' must contain no more than '1' capital letters. | 23 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 31 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 43 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 49 |
Severity | Category | Rule | Message | Line |
---|---|---|---|---|
![]() |
imports | CustomImportOrder | Wrong lexicographical order for 'com.fasterxml.jackson.databind.ObjectMapper' import. Should be before 'org.apache.streams.util.SerializationUtil'. | 28 |
![]() |
imports | CustomImportOrder | Wrong lexicographical order for 'com.fasterxml.jackson.databind.node.ObjectNode' import. Should be before 'org.apache.streams.util.SerializationUtil'. | 29 |
![]() |
javadoc | JavadocMethod | Missing a Javadoc comment. | 56 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 59 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 120). | 89 |
![]() |
blocks | RightCurly | '}' at column 5 should be alone on a line. | 100 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'while' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 100 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 110). | 105 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 107 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '{' is not preceded with whitespace. | 109 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 110 |
![]() |
blocks | RightCurly | '}' at column 5 should be on the same line as the next part of a multi-block statement (one that directly contains multiple blocks: if/else-if/else, do/while or try/catch/finally). | 112 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'while' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 115 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 130 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 134 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 124). | 142 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 121). | 143 |
![]() |
javadoc | JavadocParagraph | Empty line should be followed by <p> tag on the next line. | 145 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 124). | 146 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 119). | 147 |
![]() |
javadoc | JavadocParagraph | Empty line should be followed by <p> tag on the next line. | 149 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 119). | 150 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 121). | 151 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 105). | 152 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 154 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 155 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 160 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 130). | 161 |
![]() |
blocks | RightCurly | '}' at column 7 should be on the same line as the next part of a multi-block statement (one that directly contains multiple blocks: if/else-if/else, do/while or try/catch/finally). | 162 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 163 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 138). | 165 |
![]() |
blocks | RightCurly | '}' at column 7 should be on the same line as the next part of a multi-block statement (one that directly contains multiple blocks: if/else-if/else, do/while or try/catch/finally). | 168 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 139). | 170 |
![]() |
indentation | CommentsIndentation | Comment has incorrect indentation level 0, expected is 6, indentation should be the same level as line 175. | 173 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 175 |
![]() |
naming | CatchParameterName | Catch parameter name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 178 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 119). | 181 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 187 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 196 |
![]() |
blocks | NeedBraces | 'if' construct must use '{}'s. | 198 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 198 |
![]() |
blocks | NeedBraces | 'else' construct must use '{}'s. | 200 |
Severity | Category | Rule | Message | Line |
---|---|---|---|---|
![]() |
blocks | LeftCurly | '{' at column 1 should be on the previous line. | 30 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 102). | 31 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '{' is not preceded with whitespace. | 45 |
![]() |
blocks | LeftCurly | '{' at column 3 should be on the previous line. | 56 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'while' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 57 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '{' is not preceded with whitespace. | 57 |
![]() |
javadoc | JavadocParagraph | Empty line should be followed by <p> tag on the next line. | 60 |
![]() |
blocks | LeftCurly | '{' at column 7 should be on the previous line. | 79 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '*' is not preceded with whitespace. | 80 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '*' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 80 |
![]() |
blocks | RightCurly | '}' at column 7 should be on the same line as the next part of a multi-block statement (one that directly contains multiple blocks: if/else-if/else, do/while or try/catch/finally). | 81 |
![]() |
blocks | EmptyCatchBlock | Empty catch block. | 82 |
![]() |
naming | CatchParameterName | Catch parameter name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 82 |
![]() |
blocks | LeftCurly | '{' at column 7 should be on the previous line. | 83 |
![]() |
javadoc | JavadocMethod | Missing a Javadoc comment. | 87 |
![]() |
blocks | NeedBraces | 'if' construct must use '{}'s. | 89 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '-' is not preceded with whitespace. | 91 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '-' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 91 |
Severity | Category | Rule | Message | Line |
---|---|---|---|---|
![]() |
whitespace | EmptyLineSeparator | 'METHOD_DEF' should be separated from previous statement. | 24 |
Severity | Category | Rule | Message | Line |
---|---|---|---|---|
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'while' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 53 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '*' is not preceded with whitespace. | 72 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '*' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 72 |
![]() |
blocks | RightCurly | '}' at column 7 should be on the same line as the next part of a multi-block statement (one that directly contains multiple blocks: if/else-if/else, do/while or try/catch/finally). | 73 |
![]() |
naming | CatchParameterName | Catch parameter name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 74 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '{' is not preceded with whitespace. | 74 |
Severity | Category | Rule | Message | Line |
---|---|---|---|---|
![]() |
imports | CustomImportOrder | Wrong lexicographical order for 'org.apache.commons.lang.NotImplementedException' import. Should be before 'org.apache.streams.local.counters.StreamsTaskCounter'. | 25 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 112). | 30 |
![]() |
javadoc | JavadocMethod | Missing a Javadoc comment. | 44 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'while' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 67 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 69 |
![]() |
blocks | RightCurly | '}' at column 7 should be on the same line as the next part of a multi-block statement (one that directly contains multiple blocks: if/else-if/else, do/while or try/catch/finally). | 75 |
![]() |
naming | CatchParameterName | Catch parameter name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 79 |
Severity | Category | Rule | Message | Line |
---|---|---|---|---|
![]() |
imports | CustomImportOrder | Import statement for 'com.google.common.util.concurrent.Uninterruptibles' is in the wrong order. Should be in the 'SPECIAL_IMPORTS' group, expecting group 'STANDARD_JAVA_PACKAGE' on this line. | 30 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 41 |
![]() |
modifier | ModifierOrder | 'static' modifier out of order with the JLS suggestions. | 46 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 72 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 110 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 149). | 111 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '+' is not preceded with whitespace. | 111 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'while' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 113 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 105). | 119 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 121 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 166). | 122 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 128 |
![]() |
naming | CatchParameterName | Catch parameter name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 135 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 106). | 136 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 101). | 143 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 103). | 146 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'catch' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 147 |
![]() |
naming | CatchParameterName | Catch parameter name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 147 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 108). | 148 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 103). | 150 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 117). | 164 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '+' is not preceded with whitespace. | 164 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '+' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 164 |
Severity | Category | Rule | Message | Line |
---|---|---|---|---|
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 40 |
![]() |
modifier | ModifierOrder | 'static' modifier out of order with the JLS suggestions. | 45 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 63 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 71 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 72 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 73 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 113 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 152). | 114 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '+' is not preceded with whitespace. | 114 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'while' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 116 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 104). | 122 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 124 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 169). | 125 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 131 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 137 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'for' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 138 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 106). | 145 |
![]() |
naming | CatchParameterName | Catch parameter name 't' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 148 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 106). | 150 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 111). | 156 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'catch' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 159 |
![]() |
naming | CatchParameterName | Catch parameter name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 159 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 101). | 160 |
Severity | Category | Rule | Message | Line |
---|---|---|---|---|
![]() |
imports | CustomImportOrder | Import statement for 'com.google.common.util.concurrent.Uninterruptibles' is in the wrong order. Should be in the 'SPECIAL_IMPORTS' group, expecting group 'STANDARD_JAVA_PACKAGE' on this line. | 31 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 43 |
![]() |
modifier | ModifierOrder | 'static' modifier out of order with the JLS suggestions. | 48 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 111). | 80 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 81 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 110). | 83 |
![]() |
blocks | NeedBraces | 'if' construct must use '{}'s. | 87 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 87 |
![]() |
blocks | NeedBraces | 'else' construct must use '{}'s. | 89 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 117). | 96 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 97 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 98 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 112). | 100 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 126). | 110 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 111 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 112 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 113 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 121). | 115 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 116). | 147 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '+' is not preceded with whitespace. | 147 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '+' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 147 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 163 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 151). | 164 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '+' is not preceded with whitespace. | 164 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'switch' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 166 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'while' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 170 |
![]() |
blocks | NeedBraces | 'if' construct must use '{}'s. | 175 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 175 |
![]() |
blocks | NeedBraces | 'if' construct must use '{}'s. | 182 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 182 |
![]() |
blocks | NeedBraces | 'if' construct must use '{}'s. | 184 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 184 |
![]() |
naming | CatchParameterName | Catch parameter name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 186 |
![]() |
blocks | NeedBraces | 'if' construct must use '{}'s. | 209 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 209 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'catch' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 212 |
![]() |
naming | CatchParameterName | Catch parameter name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 212 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 104). | 216 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 117). | 218 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 112). | 227 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 114). | 228 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 111). | 229 |
![]() |
sizes | LineLength | Line is longer than 100 characters (found 111). | 231 |
![]() |
javadoc | JavadocMethod | Missing a Javadoc comment. | 234 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'while' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 237 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 239 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'if' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 242 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: 'catch' is not followed by whitespace. Empty blocks may only be represented as {} when not part of a multi-block statement (4.1.3) | 247 |
![]() |
naming | CatchParameterName | Catch parameter name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. | 247 |
Severity | Category | Rule | Message | Line |
---|---|---|---|---|
![]() |
sizes | LineLength | Line is longer than 100 characters (found 116). | 29 |
![]() |
whitespace | WhitespaceAround | WhitespaceAround: '{' is not preceded with whitespace. | 32 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 39 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 46 |
![]() |
whitespace | EmptyLineSeparator | 'METHOD_DEF' should be separated from previous statement. | 48 |
![]() |
javadoc | NonEmptyAtclauseDescription | At-clause should have a non-empty description. | 52 |
![]() |
javadoc | SummaryJavadoc | First sentence of Javadoc is incomplete (period is missing) or not present. | 74 |