Content Loading and Nodetype Support (jcr.contentloader)

Apache Sling provides support for initial content loading into a repository and for registering node types. The sling-jcr-contentloader bundle provides loading of content from a bundle into the repository and the sling-jcr-base bundle provides node type registration.

Initial Content Loading¶

Bundles can provide initial content, which is loaded into the repository when the bundle has entered the started state. Such content is expected to be contained in the bundles accessible through the Bundle entry API methods. Content to be loaded is declared in the Sling-Initial-Content bundle manifest header. This header takes a comma-separated list of bundle entry paths. Each entry and all its child entries are accessed and entered into starting with the child entries of the listed entries.

Adding this content preserves the paths of the entries as shown in this table, which assumes a Sling-Initial-Content header entry of SLING-INF/content (with no further directives):

Bundle entries are installed as follows:

It is possible to modify the intial content loading default behaviour by using certain optional directives. Directives should be specified separated by semicolon. They are defined as follows:

Examples of these directives within Sling-Initial-Content header entries:

Loading initial content from bundles¶

Repository items to be loaded into the repository, when the bundle is first installed, may be defined in four ways:

1. Directories
2. Files
3. XML descriptor files
4. JSON descriptor files

Depending on the bundle entry found in the location indicated by the Sling-Initial-Content bundle manifest header, nodes are created (and/or updated) as follows:

Directories¶

Unless a node with the name of the directory already exists or has been defined in an XML or JSON descriptor file (see below) a directory is created as a node with the primary node type "nt:folder" in the repository.

Files¶

Unless a node with the name of the file already exists or has been defined in an XML or JSON descriptor file (see below) a file is created as two nodes in the repository. The node bearing the name of the file itself is created with the primary node type "nt:file". Underneath this file node, a resource node with the primary node type "nt:resource" is created, which is set to the contents of the file.

The MIME type is derived from the file name extension by first trying to resolve it from the Bundle entry URL. If this does not resolve to a MIME type, the Sling MIME type resolution service is used to try to find a mime type. If all fals, the MIME type is defaulted to "application/octet-stream".  

XML Descriptor Files¶

Nodes, Properties and in fact complete subtrees may be described in XML files using either the JCR SystemView format, or the format described below. In either case, the file must have the .xml extension.

<node>
    <!--
       optional on top level, defaults to XML file name without .xml extension
       required for child nodes
    -->
    <name>xyz</name>

    <!--
        optional, defaults to nt:unstructured
    -->
    <primaryNodeType>nt:file</primaryNodeType>

    <!--
        optional mixin node type
        may be repeated for multiple mixin node types
    -->
    <mixinNodeType>mix:versionable</mixinNodeType>
    <mixinNodeType>mix:lockable</mixinNodeType>

    <!--
        Optional properties for the node. Each <property> element defines
        a single property of the node. The element may be repeated.
    -->
    <property>
        <!--
            required property name
        -->
        <name>prop</name>

        <!--
            value of the property.
            For multi-value properties, the values are defined by multiple
            <value> elements nested inside a <values> element instead of a
            single <value> element
        -->
        <value>property value as string</value>

        <!--
            Optional type of the property value, defaults to String.
            This must be one of the property type strings defined in the
            JCR PropertyType interface.
        -->
        <type>String</type>
    </property>

    <!--
        Additional child nodes. May be further nested.
    -->
    <node>
    ....
    </node>
</node>

Using a custom XML format¶

By writing an XSLT stylesheet file, you can use whatever XML format you prefer. The XML file references an XSLT stylesheet by using the xml-stylesheet processing instruction:

<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet href="my-transform.xsl" type="text/xsl"?> <!-- The path to my-transform.xsl is relative to this file -->

<your_custom_root_node>
   <your_custom_element>
   ...
   </your_custom_element>
...
</your_custom_root_node>

The my-transform.xsl file is then responsible for translating your format into one of the supported XML formats:

<xsl:stylesheet version="1.0" xmlns:jcr="http://www.jcp.org/jcr/1.0" xmlns:mix="http://www.jcp.org/jcr/mix/1.0" 
  xmlns:sv="http://www.jcp.org/jcr/sv/1.0" xmlns:sling="http://sling.apache.org/jcr/sling/1.0"
  xmlns:rep="internal" xmlns:nt="http://www.jcp.org/jcr/nt/1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">

  <xsl:template match="your_custom_element">
    <node>
      ...
    </node>
  </xsl:template>
  ...
</xsl:stylesheet>

JSON Descriptor Files¶

Nodes, Properties and in fact complete subtrees may be described in JSON files using the following skeleton structure (see http://www.json.org or information on the syntax of JSON) :

{
    // child node name
    "nodename" : {

        // optional primary node type, default "nt:unstructured"
        "jcr:primaryType": "sling:ScriptedComponent",

        // optional mixin node types as array
        "jcr:mixinTypes": [ ],

        // additional properties as name value pairs.
        // Multi-value properties are defined as JSON array.
        // Property type is derived from the value

        // String value (default)
        "sling:contentClass": "com.day.sling.jcr.test.Test",

        // Multi-value String
        "sampleMulti": [ "v1", "v2" ],

        // Long value, single and multi
        "sampleStruct": 1,
        "sampleStructMulti": [ 1, 2, 3 ],

        // Date follows pattern yyyy-mm-ddTHH:MM:SS.sss±HH:MM
        "sampleDate": "2014-11-27T13:26:00.000+01:00",

        // JCR Node Reference with name prefix (removed to derive node name)
        "jcr:reference:sampleRef": "386b0f48-49c3-4c58-8735-ceee6bfc1933",

        // JCR Path with name prefix (removed to derive node name)
        "jcr:path:samplePath": "/content/data",

        // JCR Name with name prefix (removed to derive node name)
        "jcr:name:sampleName": "data",

        // URI with name prefix (removed to derive node name)
        "jcr:uri:sampleUri": "http://sling.apache.org/",

        // Child nodes are simple JSON objects
        "sling:scripts": {
            "jcr:primaryType": "sling:ScriptList",
            "sling:Script": {
                    "jcr:primaryType": "sling:Script",
                    "sling:name": "/test/content/jsp/start.jsp",
                    "sling:type": "jsp",
                    "sling:glob": "*"
            }
        }
}

Extractors¶

By default, the sling-jcr-contentloader bundle tries to extract certain file types during content loading. These include json, xml, zip, and jar files. Therefore all available extractors are used for content processing. However if some files should be put into the repository unextracted, the ignoreImportProviders directive can be used with a comma separated list of extensions that should not be extracted, like ignoreImportProviders:="jar,zip". Please note that the value needs to be put into quotation marks if more than one value is used like in the example.

File name escaping¶

When the node name you want to import with the JCR ContentLoader contains characters that are not allowed in typical file systems (e.g. a ":" is not allowed on windows file systems), you can URL-encode the file name. It uses the Java URLDecoder internally.

Example: jcr%3Acontent.txt will be loaded into a node named jcr:content.txt.

Workspace Targetting¶

By default, initial content will be loaded into the default workspace. To override this, add a Sling-Initial-Content-Workspace bundle manifest header to specify the workspace. Note that all content from a bundle will be loaded into the same workspace.

Example: Load i18n JSON files¶

The Sling Internationalization Support (i18n) supports providing JSON-filed based i18n files (see i18n documentation). In this case the JSON file is not interpreted as content definition file, but is stored as binary file in the repository. Additionally a mixin mix:language and a property jcr:language with the language code has to be set on the file node.

This is an example how such an i18n file can be loaded from an OSGi bundle with the Sling Content Loader.

Within your bundle header you have to define a separate path for the i18n files where you have to explicitly disable the JSON provider:

<Sling-Initial-Content>
    SLING-INF/i18n;overwrite:=true;ignoreImportProviders:=json;path:=/apps/myapp/i18n
</Sling-Initial-Content>

The folder SLING-INF/i18n from your bundles contains a pair of files for each language, e.g.:

• en.json - The JSON file containing the i18n keys
• en.json.xml - Additional content descriptor file setting the mixing and language property

Example for the content descriptor:

<?xml version="1.0" encoding="UTF-8"?>
<node>
    <name>en.json</name>
    <mixinNodeType>mix:language</mixinNodeType>
    <property>
        <name>jcr:language</name>
        <value>en</value>
        <type>String</type>
    </property>
</node>

Declared Node Type Registration¶

The sling-jcr-base bundle provides low-level repository operations which are at the heart of the functionality of Sling: Node Type Definitions* - The class org.apache.sling.content.jcr.base.NodeTypeLoader provides methods to register custom node types with a repository given a repository session and a node type definition file in CND format. This class is also used by this bundle to register node types on behalf of other bundles.

Bundles may list node type definition files in CND format in the Sling-Nodetypes bundle header. This header is a comma-separated list of resources in the respective bundle. Each resource is taken and fed to the NodeTypeLoader to define the node types.

After a bundle has entered the resolved state, the node types listed in the Sling-Nodetypes bundle header are registered with the repository.

Node types installed by this mechanism will never be removed again by the sling-jcr-base bundle.

Starting with revision 911430, re-registration of existing node types is enabled by default. To disable this, add ;rereigster:=false to the resource names for which re-registration should be disabled.

Automated tests¶

The initial content found in the sling-test folder of the launchpad initial content is verified by the InitialContentTest when running the launchpad/testing integration tests.

Those tests can be used as verified examples of initial content loading. Contributions are welcome to improve the coverage of those tests.

ACLs and Principals¶

By adding a security:acl object to a content node definition in JSON you can define an ACL for this node. For each array entry in this example an ACE is added. Example:

{
    "security:acl": [
        { "principal": "TestGroup1", "granted": ["jcr:read","jcr:write"] },
        { "principal": "TestUser1", "granted": ["jcr:read"], "denied": ["jcr:write"] }
    ]
}

If ACLs already exist on the node you can add an order property to each array entry controlling the position where the new ACE is inserted into the list of existing ACEs. Possible values for this property:

• first: Place the target ACE as the first amongst its siblings
• last: Place the target ACE as the last amongst its siblings
• before xyz: Place the target ACE immediately before the sibling whose name is xyz
• after xyz: Place the target ACE immediately after the sibling whose name is xyz
• numeric: Place the target ACE at the specified index

You can also add new principals (users or groups) to the repository by adding a security:principals object. This is not related to any specific path/node, so you can add this JSON fragment anywhere. Example for creating one use and one group:

{
    "security:principals": [
        { "name": "TestUser1", "password": "mypassword", "extraProp1": "extraProp1Value" },
        { "name": "TestGroup1", "isgroup": "true", "members": ["TestUser1"], "extraProp1": "extraProp1Value" }
    ]
}