3.2 m53 Snapshot - Release Notes
These notes contain changes between DEV300_m41 and DEV300_m53. Please have a look for older Release Notes if you need to know former changes (example: http://development.openoffice.org/releases/3.0.m28_snapshot.html).
This release will install as OOo-Dev 3.2.
Sources can be received from SVN by tag DEV300_m53.
Important note:
DEV300_m40 was the last build towards OOo 3.1 from this codeline. The next 3.1[.1] build will be from the OOO310 codeline.DEV300_m41 is the first build that goes on with the unstable trunk. It does not belong to OOo 3.1.
See also the blog article on GullFOSS.
What's new ?
Feature title | TaskId | Spec. title | Spec. abstract | Dev. owner | Spec. link | Component |
---|---|---|---|---|---|---|
Rotate data labels | i24203 | Chart Data Labels | The options for data labels have been extended. It is possible now to define a number format for the value and the percentage value and to display both values at the same time. Furthermore one can define a separator for the different parts of the data label. The placement of the labels can be manipulated via a given set of predefined positions. | ingrid.halama@sun.com | speclink | chart |
Bubble Chart | i64689 | Chart Wizard | This specification describes the Chart Wizard which is used to create charts. The list of possible chart types now also includes bubble charts and filled net charts. | Matthias Müller-Prove (MMP) | speclink | chart |
Display of hidden cells | i91578 | Plotting of missing or hidden Values | When plotting values in a chart it can happen that some of the values are missing - for example when a cell was left empty or did not contain a valid value. The users now can decide what should be plotted in such cases:a) | ingrid.halama@sun.com | speclink | chart |
Asian typography page for chart elements | i92128 | Asian Typography tab page for Chart | A new tab page “Asian Typography” is now available for Title, Legend, Axes and Data Series. It contains an option to enable or disable the spacing between the different types of text. | ingrid.halama@sun.com | speclink | chart |
button form controls: new "Default State" property, applicable to toggle buttons | i100237 |
feature-info: Button controls in documents now have an additional property "Default status". It is enabled if and only if the button's "Toggle" property is set to "Yes", and works like the "Default status" property for e.g. check box controls: It controls in which status the button will be when resetting the form to which the button belongs. |
frank.schoenheit@sun.com |
|
dba | |
Configuration based database drivers | i101587 |
feature-info: Currently the db drivers are hard coded in OOo. The integration of new ones as extension isn't possible. Therefor all drivers have to bring their own configuration with them. Each driver has to define: - URLPattern : defines the URL which the driver supports - ParentURLPattern : allows to define a parent hierarchy - Driver : defines the UNO factory name used to create the db driver - DriverTypeDisplayName : defines the name which is shown to the user when creating a new db Additionally 3 sets can be filled, which are - Properties : describes properties which the driver understand - Features : describes which checkboxes should be shown in the special settings dialog - MetaData : describes additional settings which are handled by the db application itself As this 3 categories are set, it can not be defined what the sets will contain. But currently they support: // known JDBC settings JavaDriverClass // known settings for file-based drivers Extension CharSet HeaderLine FieldDelimiter StringDelimiter DecimalDelimiter ThousandDelimiter ShowDeleted // known ODBC settings SystemDriverSettings UseCatalog // settings related to auto increment handling AutoIncrementCreation AutoRetrievingStatement IsAutoRetrievingEnabled // known Adabas D driver setting ShutdownDatabase DataCacheSizeIncrement DataCacheSize ControlUser ControlPassword // known LDAP driver settings HostName PortNumber BaseDN MaxRowCount // misc known driver settings ParameterNameSubstitution AddIndexAppendix // known SDB level settings IgnoreDriverPrivileges NoNameLengthLimit AppendTableAliasName GenerateASBeforeCorrelationName ColumnAliasInOrderBy EnableSQL92Check BooleanComparisonMode TableTypeFilterMode RespectDriverResultSetType UseSchemaInSelect UseCatalogInSelect EnableOuterJoinEscape PreferDosLikeLineEnds FormsCheckRequiredFields EscapeDateTime IgnoreCurrency TypeInfoSettings LocalSocket Please have a look at the configuration schema org.openoffice.Office.DataAccess/Drivers.xcs for more information. |
ocke.janssen@sun.com |
|
dba | |
database formscan be zoomed | i41930 |
feature-info: Database forms can now be zoomed, much like all other documents: You'll find the usual View/Zoom menu item, and the zoom slider in the status bar. (Ctrl+Scroll wheel continues to work, as it already did before.) |
frank.schoenheit@sun.com |
|
dba | |
SRB FormWizard supports binary field types | i76783 |
feature-info: In FormWizard it is now possible to select also the BINARY, VARBINARY, LONGVARBINARY datatypes, which will insert as Pictures. |
Lars.Langhans@sun.com |
|
dba | |
Shrink Sections in Sun Report Builder | i79423 |
feature-info: There exist 3 new items in the toolbar to remove empty space between section ranges and the first or last control. * Top shrink removes the top empty space between section top range and the first top control. * Bottom shrink removes the bottom empty space between the section bottom range and the last bottom control. * Shrink removes free spaces from both directions from top and from bottom. This function could be very helpful if the report will be export as calc sheet. |
Lars.Langhans@sun.com |
|
dba | |
"First line as column names" support for Copy Table Wizard | i80917 |
feature-info: The Copy table Wizard now contains an additional check box which is enabled when RTF or HTML format is to copied into a database. The check box is label: Text [ en-US ] = "Use first ~line as column names" ; When checked the first row is used to identify column names, when not checked the first row will be handled as a normal data row. |
ocke.janssen@sun.com |
|
dba | |
SRB Grouping Dialog has a new up/down/delete toolbar | i83082 |
feature-info: In Report Builder grouping dialog exist a new toolbar which handles the up and down of grouping entries and also a new delete button to remove grouping entries. |
Lars.Langhans@sun.com |
|
dba | |
new form control property: "Visible" | i88878 |
feature-info: The new boolean property "Visible" has been added to all form control types (except the "Hidden control", which has no visual representation in the document, anyway). This property controls whether or not the control shall be visible in alive mode. In design mode, the control is always painted as before, to not make designing an invisible control unnecessarily difficult. Note that if this property is set to "Yes" (the default, mimicking the behavior as known up to 3.1), this not necessarily means the control will really appear on the screen. Additional constraints are applied when calculating a control's effective visibility. For instance, a control placed in a hidden section in Writer will never be visible at all, until at least the section itself becomes visible. If the property is set to "No", then the control will always be hidden in alive mode, no matter what. OpenOffice.org versions up to OOo 3.1 will silently ignore this property when reading documents which make use of it. The property is also used when im/exporting documents to Microsoft Excel's binary file format. |
frank.schoenheit@sun.com |
|
dba | |
multi-line text form controls preserving their selection | i89821 |
feature-info: Multi-line text controls in forms now preserve their selection when losing and re-gaining the focus, making text exchange (like multiple cut'n'pastes) somewhat easier this way. |
frank.schoenheit@sun.com |
|
dba | |
human-readable event bindings in the property browser | i95963 |
feature-info: The event bindings in the form/control property browser are now somewhat more human readable, in that a binding formerly displayed as vnd.sun.star.script:Standard.Module1.Main?language=Basic& location=application now is displayed as Standard.Module1.Main (application, Basic) |
frank.schoenheit@sun.com |
|
dba | |
event assignments in the property browser can be reset with DEL key | i95977 |
feature-info: In the form/control property browser, event assignments can be reset using the DEL key. That is, the read-only input field which is to display (but not modify) the event assignment now at least accepts DEL, completely revoking the assignment for the given event. |
frank.schoenheit@sun.com |
|
dba | |
property browser: mouse-selection-behavior in property combo boxes changed | i96429 |
feature-info: In the property browser, for properties displayed using a combo box (so you can enter free text, but select from a pre-defined list of possible options as well), the behavior for mouse selections changed: Formerly, when you selected an entry from the list, you needed to focus another cell somewhere else before the changed value was committed (even though it was already entered into the text field). Now, the property value is committed already when you select the entry from the list, which makes the work flow somewhat smoother in many cases. |
frank.schoenheit@sun.com |
|
dba | |
SRB controls bound to data source displays it data source name | i96523 |
feature-info: In Sun Report Builder all controls bound to a data source displays it's data source name the prefix is like Calc a '=' (equal). |
Lars.Langhans@sun.com |
|
dba | |
SRB toolbar items has now also menu items | i96782 |
feature-info: All current toolbar items for Report Builder are now also available in the menu structure. For clear work, all items which manipulate existing fields can found in the edit menu structure like section shrink or control resizings. New controls which have to insert are stored in the insert menu structure like picture or shapes. |
Lars.Langhans@sun.com |
|
dba | |
SRB Context menu contains also section shrink items | i96793 |
feature-info: The context menu in active section contains a shrink item, which has a sub menu for the new shrink feature. |
Lars.Langhans@sun.com |
|
dba | |
form control property browser: renamed "Print" to "Printable" | i97355 |
feature-info: The property "Print" in the property browser, when invoked for a form control, has been renamed to "Printable". |
frank.schoenheit@sun.com |
|
dba | |
button control properties: renamed the action-related events | i97356 |
feature-info: Form control buttons feature two events which are fired when the button is pressed, one to veto the actual firing, and one to do an actual action associated with the button. Formerly, they were called "Before commencing" and "When initiating", and as such a constant source of confusion, since it was non-obvious which event to use for which purpose. This situation hopefully improved a little bit with renaming the events (in the property browser) to "Approve action" and "Execute action". |
frank.schoenheit@sun.com |
|
dba | |
SRB ReportWizard supports binary field types | i98557 |
feature-info: It is possible to select BINARY, VARBINARY, LONGVARBINARY datatypes in the Report Wizard. This will insert ImageControls instead of formatted fields. The images will be set 4cm high. Pictures will scale down to this size. |
Lars.Langhans@sun.com |
|
dba | |
form control property browser: added Position, Size, and Anchor | i99056 |
feature-info: In the property browser for form controls, you can now also change the position and size of the control, as well as its anchor (in document types where anchoring is supported, e.g. text docs and spreadsheets). This is especially useful when you want to modify the geometry of multiple controls at once, which previously required invocation of a modal dialog for every control, and now can be done by selecting all controls, and simply entering the new value(s) in the property browser. |
frank.schoenheit@sun.com |
|
dba | |
font name/style/size displayed in form control property browser | i99422 |
feature-info: When displaying the properties of a form control in the property browser, the "Font" property will now display the name, the style (regular, bold, italic) and the size of the current control font. (previously the respective field was simply empty, and the font could only be seen when opening the Character Set dialog.) |
frank.schoenheit@sun.com |
|
dba | |
control property "Mouse wheel scroll" | i99704 |
feature-info: All form controls which are able to react on the mouse wheel, by scrolling or spinning their content, got a new property called "Mouse wheel scroll". This property is available in the control property browser, immediately below the "Tab order" property, and can take one out of three possible values: - Never: Completely ignore the mouse wheel - When focused: react on the mouse wheel only when the control currently has the focus - Always: always react on the mouse wheel, even when the control currently does not have the focus, but the mouse is over the control when the wheel is operated The defaults for this property is "When focused", which means newly created controls behave as before. When writing documents with controls making use of this new property, older versions will silently ignore the property. In the table data view for database documents, this property is used to prevent the user accidentally spinning the content of numeric grid columns: In this view, the mouse wheel is used to scroll the complete result set, not individual cell content (which formerly happened accidentally and too easily). |
frank.schoenheit@sun.com |
|
dba | |
Math: "View / Selection" now "View / Formula Elements" | i33387 |
feature-info: The menu entry "View / Selection" in Math is now labeled "View / Formula Elements". |
thomas.lange@sun.com |
|
formula editor | |
Allow to turn off lock-file base document file locking. | i100123 |
feature-info: To work properly, the lock-file based document file locking in OOo needs the possibility to create a lock file in the way that it does not replace the existing one and to remove it. Although normally there are possibilities to do it, sometimes this is not the case. Usually, if the system file locking is on, the office can try to avoid creation of the lock file in this cases, since the file is locked by system file locking. And in case somebody would use the office without system file locking the collision would be detected by the new implementation anyway. This solution is taken to let the most probable scenarios work even in those cases. The problem happens when the lock file can be created but can not be removed for any reason. Although in all the known cases it is either a misconfigured network or a bug in system implementation, it looks to make sense to allow the system administrator to turn the OOo lock-file based file locking off. Thus it would allow to workaround the problem without changing the environment. For this reason there is a new configuration entry "/org.openoffice.office.Common/Misc/UseDocumentOOoLockFile" that is set to "true" by default. It should be set to "false" to deactivate the usage of the lock file. The deactivation will not prevent creation of the lock file. The office will just take the ownership over the lock file even if it already exists. It is of course strongly suggested not to turn off system file locking and lock-file based file locking together, since there will be no real locking at all in this case. |
Mikhail.Voytenko@Sun.COM |
|
framework | |
Keyboard shortcut configuration dialog now supports "ALT" modifier | i4756 |
feature-info: Though the configuration itself was able to handle it all the time, the dialog for configuring keyboard shorcuts never allowed to use the ALT-key. Now ALT as well als SHIFT-ALT, CTRL-ALT, SHIFT-CTRL-ALT modifiers can be used in the dialog. The dialog does not check if a shortcut can be used or if the system already catches it. The easiest way to find out if the shortcut is usable is to use it to navigate to the corresponding entry in the listbox before trying to assign a command to it. |
mathias.bauer@sun.com |
|
framework | |
Basic dialog controls: new property "Visible" | i88878 |
feature-info: The new boolean property "Visible" has been added to all UNO dialog control types. This property controls whether or not the control shall be visible in the living dialog. Note that if this property is set to "Yes" (the default, mimicking the behavior as known up to 3.1), this not necessarily means the control will really appear in the dialog. Additional constraints are applied when calculating a control's effective visibility. For instance, a control belonging to a non-current step of the dialog is still hidden. OpenOffice.org versions up to OOo 3.1 will silently ignore this property when reading UNO dialogs which make use of it. |
frank.schoenheit@sun.com |
|
framework | |
Multiplatform shortcuts support | i99296 | rvojta@openoffice.org | speclink | framework | ||
Menu items display changed | i42227 | Menus | A style guide for menus in OpenOffice.org. | philipp.lohmann@sun.com | speclink | gsl |
New text field "Page Count" in impress/draw | i14832 | christian.lippka@sun.com | speclink | presentation | ||
hid.lst file is removed from testautomation | i97838 |
feature-info: The file testautomation/global/hid/hid.lst is removed. Further details are in a readme.txt inside the directory. There are various other ways to get this file and where it is already available. There are some ways implemented, that try to find the file via various ways. TestTool: Your OOo installation may already contain it at: |
tbo@openoffice.org |
|
qa | |
SYLK export handling of embedded semicolons and double quotes; program ID field content changes to CALCOOO32 | i100205 |
feature-info: When writing SYLK files, in string data embedded double quotes are not escaped anymore by doubling them, semicolons are now escaped by doubling them. Previous releases had a bug that did it vice versa, doubling quotes but not semicolons. In formula expressions, if the formula contained embedded semicolons, the expression was written as a quoted string, again doubling embedded quotes, but not semicolons. Instead, expressions now are not written as a quoted string, but semicolons escaped by doubling them. In the previous implementation, Calc could not correctly read data exported by/for Excel if the data contained double quotes (data is truncated) or semicolons (read in duplicated), nor could it produce such files correctly. NOTE: The program ID written changes from SCALC3 (ID;PSCALC3) to CALCOOO32 (ID;PCALCOOO32) due to the incompatible file format. Older releases will treat such files as alien data, not reading the formula expressions. The result will be much the same as if a file produced by Excel was read in. The new code is able to read both variants, translating data from the corrupted file format. |
eike.rathke@sun.com |
|
sc | |
Sorting with toolbar buttons now includes formats | i13829 |
feature-info: When a cell range is sorted using the "Sort Ascending" or "Sort Descending" toolbar button, cell formats are now sorted with the cells. |
niklas.nebel@sun.com |
|
sc | |
More filter criteria in "Standard Filter" dialog | i17995 |
feature-info: The "Standard Filter" dialog now shows 4 instead of 3 conditions, and has a scroll bar which allows to access up to 8 conditions in total. |
niklas.nebel@sun.com |
|
sc | |
Change source range of a DataPilot table | i23658 |
feature-info: It's now possible to change the cell range from which a DataPilot table takes its data. |
niklas.nebel@sun.com |
|
sc | |
"New Style" buttons in "Conditional Formatting" dialog | i27253 |
feature-info: The "Conditional Formatting" dialog now has a button "New Style" next to each style list box. Pressing one of the buttons opens the "Cell Style" dialog for a new style, and if OK is pressed there, selects the new style in the list box. This allows to create a new style without closing the "Conditional Formatting" dialog. |
niklas.nebel@sun.com |
|
sc | |
Cell content is selected in validity selection list | i27666 |
feature-info: If a cell has validity of type "Cell range" or "List", when the validity selection list drop-down is opened, the existing cell content is now selected in the list. |
niklas.nebel@sun.com |
|
sc | |
Transporting newlines in spreadsheet formulas | i35913 |
feature-info: Newline characters (0x0A, decimal 10) created with Control+Enter in multiline text cells are now preserved in spreadsheet formulas. Previously the newline character was replaced by a space character. The newline character can be searched for using the SEARCH or [HV]LOOKUP or MATCH functions with the \n regular expression. A newline character can be inserted in a formula using the CHAR(10) function. If the result contains newline characters it is displayed as a multiline cell. The multiline result is exported to file formats capable handling newlines in cell data, such as CSV. |
eike.rathke@sun.com |
|
sc | |
Double click on document position in status bar opens Navigator | i49491 |
feature-info: A double click on the "document position" control in the Calc status bar now opens the Navigator, like in Writer. |
niklas.nebel@sun.com |
|
sc | |
Applying cell borders to multiple selection | i50019 |
feature-info: Previously it was only possible to apply cell borders to a single rectangular cell range. Now borders can be applied to any selection of cells. A list of rectangular ranges is determined from the selection, and inner/outer borders are applied to each of the ranges. |
niklas.nebel@sun.com |
|
sc | |
AutoFill for cells with numbers at the start and end | i5550 |
feature-info: If the starting cell for AutoFill contains a number at the start and the end, and there's no space after the first number, the number at the end is now incremented. This allows easier creation of things like lists of IP addresses (10.0.0.1 is followed by 10.0.0.2). |
niklas.nebel@sun.com |
|
sc | |
Sort range dialog | i60401 |
feature-info: If "Sort" is invoked with a selection of more than one cell in a single column or row, and there are non-empty cells next to the selection, a new dialog will ask if the selection should be extended to contain those cells. With this, a user can select only the column of data by which to sort, and still sort the whole range. It applies to the sort dialog as well as the "Sort Ascending" and "Sort Descending" toolbar buttons. A specification is attached to issue 60401. |
niklas.nebel@sun.com |
|
sc | |
Easier deselection of sheets if all sheets are selected | i70320 |
feature-info: If all sheets in a document are selected, each of the following actions deselects all except the current sheet: - Changing the active sheet - Clicking into the area right of the sheet tabs (if not all sheets are selected, this opens the "Insert Sheet" dialog as before) - The new entry "Deselect All Sheets" in the context menu for the sheet tabs |
niklas.nebel@sun.com |
|
sc | |
Copy & Paste of merged cells over other merged cells | i7500 |
feature-info: Merged cells can now be pasted from the clipboard onto other merged cells. Instead of an error message, the old cells are unmerged. |
niklas.nebel@sun.com |
|
sc | |
Easier deselection of sheets if all sheets are selected | i7921 |
feature-info: If all sheets in a document are selected, each of the following actions deselects all except the current sheet: - Changing the active sheet - Clicking into the area right of the sheet tabs (if not all sheets are selected, this opens the "Insert Sheet" dialog as before) - The new entry "Deselect All Sheets" in the context menu for the sheet tabs |
niklas.nebel@sun.com |
|
sc | |
Inserting/deleting in the middle of merged cells | i8302 |
feature-info: Inserting or deleting cells, columns or rows into/from the middle of merged cells, which previously caused an error message, is now possible. The merged cell range is enlarged/reduced. |
niklas.nebel@sun.com |
|
sc | |
configure switch to build hid.lst file: --enable-hids | i102592 |
feature-info: The build environment variable NO_HIDS, which affects to not build a current hid.lst, was not configureable by 'configure'. This changes by CWS tbo07 with 'configure --enable-hids' The change is needed, since testautomation depends now on a current hid.lst. Buildbots will start using this switch soon. When the switch is used, the hid.lst is build, if it is left out, the old behaviour is the default, to not build it. Old behaviour was to use a static hid.lst from helpcontent2/helpers/hid.lst. |
tbo@openoffice.org |
|
tools | |
default paper sizes | i92819 | Paper Sizes : Presenting and Picking Defaults | The vast majority of territories use ISO paper sizes, but a number use alternative sizes. The rules for mapping territories to default paper sizes needs to be unified in a single place in order to consistently maintain and update the mapping. This specification outlines rules for picking the best default paper size to use, which additional paper sizes should be shown in the UI and rules for naming paper sizes consistently. | Caolán McNamara CMC | speclink | ui |
Optionitem "Icons in menus" now listbox with three options | i95318 |
feature-info: The Tools/Options->OpenOffice.org/View page now has a listbox for the "Icons in menus" option. The enhancement is implemented in CWS gtkmenuimages. This was a checkbox before and is now a listbox offering three options: 1) Automatic 2) Hide 3) Show |
Joerg.Skottke@Sun.COM |
|
ui | |
Convert text to table dialog changed | i101814 |
feature-info: The AutoFormat button has been moved in the dialog to ease localization. The dialog is now similar to Insert/Table. |
oliver.specht@sun.com |
|
word processing | |
The base line of Wiki Publisher is changed to OOo3.0 | i81373 |
feature-info: Unfortunately, it is not possible to install an xslt-transformation filter as a part of extension in OOo2.4. The problem is fixed in OOo3.0, thus the new base line for the new versions of the extension is moved to OOo3.0 As result the users of the OOo2.4 will not be able to install the new version of the extension. |
Mikhail.Voitenko@sun.com |
|
word processing | |
Ctrl+F11 puts the focus into the style ListBox | i81468 |
feature-info: The key combination Ctrl+F11 doesn't call the Style Catalog anymore. Now it puts the focus into the style ListBox in the toolbox of text, frames, OLE-objects and pictures. It makes it easier to apply a paragraph or frame style without using a mouse. |
oliver.specht@sun.com |
|
word processing | |
MediaWiki filter is no more installed as part of OOo installation | i99462 |
feature-info: The MediaWiki filter is not installed as part of OOo installation any more. Instead it will be installed as a part of Wiki Publisher extension, since the two implementations are used together and it allows to provide updates for the filter independently from OOo releases. |
Mikhail.Voitenko@sun.com |
|
word processing |
Integrated Child Workspaces
List of integrated child workspaces:
Name | Description |
Milestone (integrated) |
ause105 |
build fixes |
DEV300m53 |
automationdev300m52cat0 |
Important automation fixes |
DEV300m53 |
dba311a_DEV300 |
Bug fixes for 3.1.1 |
DEV300m53 |
dev300m53masterfix | DEV300m53 | |
dr68 |
Calc fixes, OOXML filter |
DEV300m53 |
fhawfixes2 |
[Automation] Automation-Script-Fixes for Writer. |
DEV300m53 |
jl129 |
Fixing test program (windows -only) and ole automation fix. |
DEV300m53 |
mav53_DEV300 |
Framework showstopper-fixes for OOo3.1.1. |
DEV300m53 |
mingwport21 |
MinGW port fix |
DEV300m53 |
mox01 |
keyboard shortcut for Unformatted text. |
DEV300m53 |
moz2seamonkey01 |
Mozilla 1.7.5 -> Seamonkey 1.1.x migration ( Windows, Mac OS X , Linux ) |
DEV300m53 |
native254 |
OOo 3.2 tasks |
DEV300m53 |
native255_DEV300 |
OOo 3.1.1 / SO 9.1.1 fixes |
DEV300m53 |
ooo311gsl05_DEV300 |
more 3.1.1 issues |
DEV300m53 |
tbo07 |
- remove hid.lst from testautomation |
DEV300m53 |
Name | Description |
Milestone (integrated) |
ause104 |
minor tweaks to makefiles and SO environment |
DEV300m52 |
automation300m50cat0 | DEV300m52 | |
automationdev300m49cat3b | DEV300m52 | |
automationdev300m51cat0 |
Changes to automation testscriptes for categorie 0 which have to be integrated in DEV300m52 |
DEV300m52 |
aw065 |
BugFixing CWS for 3.2 |
DEV300m52 |
bserver47 | DEV300m52 | |
bubblechart |
Bubble Chart |
DEV300m52 |
c17v006_DEV300 | DEV300m52 | |
c27v001_DEV300 | DEV300m52 | |
cms11_DEV300 | DEV300m52 | |
dba32c | DEV300m52 | |
dba32d | DEV300m52 | |
dbaperf2 |
Avoid the loading of all database drivers in first start up of the db wizard. |
DEV300m52 |
dev300m52masterfix | DEV300m52 | |
dr70 |
Calc performance issues |
DEV300m52 |
fwk108 |
Performance improvements for OOo. |
DEV300m52 |
hb18 | DEV300m52 | |
hb311fixes01_DEV300 | DEV300m52 | |
impress173_DEV300 |
Impress and Draw bug fixes for 3.1.1 |
DEV300m52 |
jl128_DEV300 |
bundle new Java |
DEV300m52 |
koheiformula03 |
Bug fixes related to the variable formula syntax support, and other small-ish Calc fixes |
DEV300m52 |
native250_DEV300 |
Preparations for OOo 3.1.1 |
DEV300m52 |
native251 |
OOo 3.2 installation tasks. Replacement for native249. |
DEV300m52 |
odfmetadata2 |
Implementation of ODF 1.2 metadata support, part 2: |
DEV300m52 |
ooo311gsl03_DEV300 |
3.1.1 issues |
DEV300m52 |
ooo311gsl04_DEV300 |
Some more 3.1.1 tasks |
DEV300m52 |
os130a |
Clone of cws os130 which was killed by a rebase action |
DEV300m52 |
perftest08 | DEV300m52 | |
scsheetprotection02 |
Refactor the sc and svx modules in preparation for the future implementation of |
DEV300m52 |
sdk311_DEV300 |
OOo 3.1.1 bugfix |
DEV300m52 |
tkr22_DEV300 | DEV300m52 | |
unoapi04 | DEV300m52 |
Name |
Description |
Milestone (integrated) |
ause102 |
remove solver from PATH |
DEV300m51 |
automation006 |
[Automation] |
DEV300m51 |
calc50 |
Miscellaneous Calc implementation and fixes for 3.2 |
DEV300m51 |
dev300m51masterfix | DEV300m51 | |
fhawfixes1 | DEV300m51 | |
fwk103 |
Framework fixes for OpenOffice.org 3.2 |
DEV300m51 |
hcshared21 |
Application Help issues that are not part of a feature CWS |
DEV300m51 |
impress171 |
Issues for Impress with target OOo 3.2 |
DEV300m51 |
jl126_DEV300 |
Assembly versions must be incremented for EVERY release. |
DEV300m51 |
l10ncleanup04 |
Move translations into own module |
DEV300m51 |
mav54_P1 | DEV300m51 | |
mingwport20 |
mingw port update |
DEV300m51 |
ooo311gsl01_DEV300 |
GSL issues for target OOo311 |
DEV300m51 |
ooo311gsl02_DEV300 |
Fix 3.1.1 issues |
DEV300m51 |
ooo31osol_DEV300 |
Release CWS |
DEV300m51 |
pdfextfix02_DEV300 |
Improvement of pdf import extension |
DEV300m51 |
svp02_DEV300 | DEV300m51 | |
unifypaper01 |
Add a "long bond" paper type in the UI (used in the Philippines) and merge |
DEV300m51 |
ause101 | DEV300m50 | |
automationdev300m48cat3 |
Fixes
for module testautomation for category 3. To be integrated in next |
DEV300m50 |
bserver46 | DEV300m50 | |
c06v7_DEV300 | DEV300m50 | |
calclinkfixes |
Fixes to links/external references in Calc |
DEV300m50 |
calcperf04 |
Calc performance improvements. |
DEV300m50 |
chart37 |
Chart: Rotate Data Labels, Asian Typography and bug fixes |
DEV300m50 |
clnoundo |
This
cws fixes a crash while loading tables that was introduced with the new |
DEV300m50 |
cmcfixes59 |
misc small dev-level fixes |
DEV300m50 |
dba32b | DEV300m50 | |
dev300m50masterfix | DEV300m50 | |
evoab2def |
replace the stone-aged command-line-based SDBC driver for |
DEV300m50 |
extmgr02 |
fix Mac OS X / linux (archive) build problem |
DEV300m50 |
macrofpicker01 |
Fix problem with Aqua filepicker when called from a macro. |
DEV300m50 |
mav52 |
Fixes for Wiki Publisher. |
DEV300m50 |
mla01 |
Bugfixing for OOo 3.x, mostly strings (mla test cws) |
DEV300m50 |
native247 |
OOo 3.2 installation tasks |
DEV300m50 |
os128 |
performance improvements in sw and xmloff |
DEV300m50 |
sysui37 |
rpm packaging / smoketest / insetset fixes |
DEV300m50 |
tkr20 |
OOo 3.2 Bug fixes and patches |
DEV300m50 |
vcl101 |
More 3.2 fixes |
DEV300m50 |
vcl102 |
gsl changes for OOo 3.2 |
DEV300m50 |
ab68 |
xmlhelp related changes / fixes |
DEV300m49 |
automation005 |
[Automation] m47 script fixes |
DEV300m49 |
automation32m47 |
Fixes for testautomation scripts on the way to 3.2 |
DEV300m49 |
cairocanvastext01 |
When cairo canvas is used to render graphics, render also text with cairo canvas |
DEV300m49 |
calc49 |
Ongoing Calc development for 3.2 |
DEV300m49 |
calcmultiline |
Handle multiple lines (newlines) within formula results. |
DEV300m49 |
datapilotrange |
Allow to change the source range of a DataPilot table |
DEV300m49 |
dev300m49masterfix | DEV300m49 | |
dv11 | DEV300m49 | |
impress169 |
ongoing work for impress in OOo 3.2 |
DEV300m49 |
koheichart01 |
Display of hidden cells - Add support for showing/hiding data points in chart by simply |
DEV300m49 |
m48fixshorttrack |
shorttrack CWS (aka master fix) for an annoying issue |
DEV300m49 |
mav51 | DEV300m49 | |
native240 |
Making full packaging process "cygwin ready". |
DEV300m49 |
smoketest22 |
smoketest fixes |
DEV300m49 |
tl66 |
Misc fixes for OOo 3.2 |
DEV300m49 |
cmcfixes58 |
trivial fixes |
DEV300m48 |
dev300m48masterfix | DEV300m48 | |
fwk111_DEV300 |
Possible showstoppers for OOo 3.1. |
DEV300m48 |
impress168 |
Impress 3.2 bugfix workspace |
DEV300m48 |
impress170 |
Bug fixes |
DEV300m48 |
mba32issues01 |
Small bug fixes, patches etc. |
DEV300m48 |
mingwport19 |
mingw port update fix |
DEV300m48 |
os127 |
Bugfixing in sw |
DEV300m48 |
paw06 | DEV300m48 |
ause100 |
small fixes and cleanups |
DEV300m47 |
automation310g_DEV300 |
[Automation] |
DEV300m47 |
automation310m9_DEV300 |
latest fixes for testautomation module |
DEV300m47 |
automation310wg_DEV300 | DEV300m47 | |
aw069 |
BugFixing CWS for #i100710# |
DEV300m47 |
aw070_DEV300 |
BugFixing CWS (mainly #i100851#) |
DEV300m47 |
aw071_DEV300 |
BugFixing CWS (for #i101016#) |
DEV300m47 |
aw072_DEV300 |
BugFixing CWS OOo 3.1 (#i101169#) |
DEV300m47 |
bfshrink02 |
remove latest set of unused methods in binfilter (90+) |
DEV300m47 |
calc31stopper5_DEV300 |
3.1 stopper issue #i101118# |
DEV300m47 |
calcdelrows_DEV300 |
Fix a problem with deleted rows in Calc collaboration |
DEV300m47 |
cli005 |
Cleanup some basic code and minor warning issues. |
DEV300m47 |
cltexteditfix_DEV300 | DEV300m47 | |
cmcfixes57 |
misc build fixes |
DEV300m47 |
cwstestresult02 |
submit test results now also for milestones |
DEV300m47 |
dba31m_DEV300 |
Fix in SRB and some other "minor" issues |
DEV300m47 |
dba32a |
ongoing DBA bug fixing towards OOo 3.2 |
DEV300m47 |
dbaperf1 |
Performance improvements for accessing databases |
DEV300m47 |
dev300m47masterfix | DEV300m47 | |
dr67 |
Fixed and extensions for OOXML import |
DEV300m47 |
fwk110_DEV300 |
Showstopper for OOo 3.1 |
DEV300m47 |
gtkmenuimages |
By default follow the system theme as to whether to display menus images |
DEV300m47 |
hr62 |
PCVSLib is no longer in use for OOo and is now hosted separately: |
DEV300m47 |
layoutdialogs2 |
. |
DEV300m47 |
macshortcuts01 |
Mac OS X shortcut issues. |
DEV300m47 |
mav46 |
MediaWiki Publisher related cws. |
DEV300m47 |
mav50_DEV300 |
OOo3.1 framework showstopper cws. |
DEV300m47 |
mingwport18 |
MinGW port update and enhancement |
DEV300m47 |
native236 |
OOo 3.2 tasks |
DEV300m47 |
native241correct_DEV300 |
remove writer2latex from the installset in a correct way and not half-baked. |
DEV300m47 |
odfp31b_DEV300 | DEV300m47 | |
ooo31gsl10_DEV300 |
Fix some 3.1 showstoppers |
DEV300m47 |
python26 |
upgrade python engine 2.3 -> 2.6 |
DEV300m47 |
rnwinr01_DEV300 |
fix issue i101156 |
DEV300m47 |
sb107 |
misc fixes |
DEV300m47 |
sb109 |
misc fixes |
DEV300m47 |
sdk31fix_DEV300 |
OO.org 3.1 SDK fixes |
DEV300m47 |
sw31bf10_DEV300 |
CWS for OOo 3.1 show stopper fixes |
DEV300m47 |
sw32bf01 |
fixes for serious issues in Writer for OOo 3.2 |
DEV300m47 |
swrefactormarks2 |
code refactoring in Writer to set all the various new features that rely on a reference to a range of text on |
DEV300m47 |
automation003 |
[Automation] |
DEV300m46 |
automation004 |
Fix regression in autotests, oversight from CWS dv10 |
DEV300m46 |
automation31gsl1_DEV300 |
Workaround some focus issues that happen in the testtool context |
DEV300m46 |
aw066_DEV300 |
CWS for AAed 3D chart enhancements |
DEV300m46 |
aw067_DEV300 |
BugFixing CWS for OOo3.1 |
DEV300m46 |
aw068_DEV300 |
CWS for 3.1 BugFixing (Showstopper) |
DEV300m46 |
calc31stopper4_DEV300 |
Yet another Calc 3.1 blocker. |
DEV300m46 |
calcsheetref_DEV300 |
Fix in sheet name references. |
DEV300m46 |
cmcfixes56 |
Warnings and misc porting fixes |
DEV300m46 |
dba31l_DEV300 |
fix issue 100541 |
DEV300m46 |
dev300m46masterfix | DEV300m46 | |
dv10 |
misc bug fixes |
DEV300m46 |
fwk106_DEV300 |
Fixes for performance problems on Mac. |
DEV300m46 |
fwk107_DEV300 |
Fixes broken removeTab() method in tab control service. |
DEV300m46 |
hb21_DEV300 |
Showstopper for 3.1 |
DEV300m46 |
jl119_DEV300 |
Showstopper for 3.1 |
DEV300m46 |
jl124 |
This cws is a replacement for cws jl122 which contained some difficult to |
DEV300m46 |
l10nfix310_DEV300 |
contains a mini officecfg l10n fix for zh-TW. |
DEV300m46 |
mh31_last_DEV300 |
update of thirdpartylicensereadme |
DEV300m46 |
minimizer01 | DEV300m46 | |
native239_DEV300 |
Including new JRE6u13. |
DEV300m46 |
ooo31gsl6_DEV300 |
Complete fix for issue 99567 |
DEV300m46 |
ooo31gsl7_DEV300 |
Fixes for showstoppers in GSL: |
DEV300m46 |
ooo31gsl9_DEV300 |
Fix some mac problems |
DEV300m46 |
sw31bf08_DEV300 |
showstoppers in framework for OOo 3.1 |
DEV300m46 |
tbo05 |
testautomation: Reduce entries in cons.txt for hid.lst generation |
DEV300m46 |
tbo06_DEV300 |
Fix urgent integration problem of known isssue for MacOS X exeption. |
DEV300m46 |
tkr21_DEV300 |
OpenSSL 0.9.8k update |
DEV300m46 |
tl67 | DEV300m46 | |
vcl100 |
3.2 gsl fixes |
DEV300m46 |
vistainstall_DEV300 |
Fix installation on Windows Vista |
DEV300m46 |
automation310d_DEV300 | DEV300m45 | |
automation310e_DEV300 | DEV300m45 | |
automation_gapplication_unify |
[Automation] |
DEV300m45 |
bserver45 | DEV300m45 | |
c26v001 | DEV300m45 | |
cygwin03 |
setsolar support on cygwin |
DEV300m45 |
dba31j_DEV300 |
3.1 bug fixing for DBA |
DEV300m45 |
dba31k_DEV300 |
Show stopper fixing for 3.1 |
DEV300m45 |
dev300m45masterfix | DEV300m45 | |
gh16 |
push hid.lst to database for UserFeedback |
DEV300m45 |
native235_DEV300 |
Prepare Java GUI Installer for Solaris Update |
DEV300m45 |
native238_DEV300 |
English license text into all Solaris packages. |
DEV300m45 |
obo36 |
Misc. fixes |
DEV300m45 |
ooo31gsl5_DEV300 |
Still more issues for 3.1 |
DEV300m45 |
rptfix06_DEV300 |
fix SRB build to a) handle --with-system-apache-commons correctly and b) fix --with-system-*t build to include commons-logging-1.1.1jar/$(COMMONS_LOGGING_JAR) in the MANIFEST.MF |
DEV300m45 |
sw31bf09_DEV300 |
again late fix in Writer for OOo 3.1 |
DEV300m45 |
automation002 |
[Automation] |
DEV300m44 |
automation310b_DEV300 |
[Automation] |
DEV300m44 |
automation310c_DEV300 |
[Automation] |
DEV300m44 |
aw064 |
BugFixing CWS; split from aw063 and migrated tasks which were too many for aw063 |
DEV300m44 |
calc31stopper2_DEV300 |
more show stoppers for OOo 3.1 |
DEV300m44 |
calc31stopper3_DEV300 |
Calc 3.1 blocker issues. |
DEV300m44 |
calc31stopper_DEV300 |
show stoppers for OOo 3.1 |
DEV300m44 |
calcsoli2_DEV300 |
Calc sheet selection problem on Solaris/x86 |
DEV300m44 |
chartranges_DEV300 |
Fix a regression with chart data ranges in Calc |
DEV300m44 |
cl12_DEV300 |
|
DEV300m44 |
cmcfixes53 |
remove some unused code |
DEV300m44 |
cmcfixes55 |
Fix some warnings and low-hanging unused methods |
DEV300m44 |
configure24_DEV300 |
configure fixes |
DEV300m44 |
dev300m44masterfix |
|
DEV300m44 |
fwk105_DEV300 |
more late fixes in Writer for OOo 3.1 |
DEV300m44 |
hb20_DEV300 |
showstoppers for 3.1 |
DEV300m44 |
hr60_DEV300 |
CWS-Tools: miscellaneous fixes. |
DEV300m44 |
localization35 |
Localization for OOo 3.1 |
DEV300m44 |
mav47_DEV300 |
Showstopper fix for suggested name in SaveAs dialog. |
DEV300m44 |
mav48_DEV300 |
Framework showstopper fixes for OOo3.1 |
DEV300m44 |
mhu17 |
Module 'store' bugfixes and performance optimizations |
DEV300m44 |
mingwport17 |
mingw port fix and enhancement |
DEV300m44 |
native231 |
Setting version OOo 3.2 |
DEV300m44 |
native234_DEV300 |
OOo 3.1 installation tasks. |
DEV300m44 |
newbaselineunxlngi |
|
DEV300m44 |
ooo31gsl4_DEV300 |
More 3.1 showstoppers |
DEV300m44 |
oooimprovement3_DEV300 |
Important final fixes for Usage Tracking support |
DEV300m44 |
smoketest21 |
smoketest fixes |
DEV300m44 |
sw31bf05 |
late fixes for OOo 3.1 in Writer |
DEV300m44 |
sw31bf07_DEV300 |
late Writer fixes for OOo 3.1 |
DEV300m44 |
xmergeclean |
Add a final DOM->XML serialization fallback and clean up trivial warnings |
DEV300m44 |
automation310a_DEV300 |
fix automation issue for the OOO 310 release |
DEV300m43 |
aw063 |
BugFixing CWS |
DEV300m43 |
calc48 |
Regression fixes around the Function Wizard |
DEV300m43 |
calcperf03 |
Smash some performance bottle necks. |
DEV300m43 |
chart35 |
Bug fixes for Chart and Calc |
DEV300m43 |
cmcfixes54 |
Warnings/Errors fixes |
DEV300m43 |
cmis01 |
|
DEV300m43 |
dev300m43masterfix |
|
DEV300m43 |
dr66 |
All known cell notes issues, including broken Undo/Redo handling in conjunction with notes |
DEV300m43 |
fwk104_DEV300 |
Showstopper fix for new accelerator configuration. |
DEV300m43 |
gfbcrash |
Fixes an important stability problem |
DEV300m43 |
hb19_DEV300 |
showstoppers for 3.1 (hb17 recreated on OOO310_m1) |
DEV300m43 |
hde02_DEV300 |
Autotest fixes for 3.1 |
DEV300m43 |
hunspell4thesaurus |
Add stemming and morphological generation capabilities to |
DEV300m43 |
impress162 |
Slideshow and canvas related bug fixes. |
DEV300m43 |
jl117_DEV300 |
Showstopper CWS |
DEV300m43 |
koheiformula02 |
Further refactoring of Calc code in preparation for variable formula syntax |
DEV300m43 |
movepsprint |
Move psprint code into vcl |
DEV300m43 |
native222 |
Creating new packaging process for signing Windows installation sets |
DEV300m43 |
native223 |
Package Pool for Unixes |
DEV300m43 |
native224 |
Spellchecker into language packs. |
DEV300m43 |
native226_DEV300 |
OOo 3.1 packaging issues. |
DEV300m43 |
native227_DEV300 |
OOo 3.1 packaging and installation tasks |
DEV300m43 |
native228 |
OOo 3.2 packaging and installation tasks. |
DEV300m43 |
native230 |
Enable rpm builds for Linux without LD_LIBRARY_PATH. |
DEV300m43 |
odfp31 |
|
DEV300m43 |
ooo31gsl1 |
3.1 showstopper fixes |
DEV300m43 |
ooo31gsl2_DEV300 |
More 3.1 showstoppers |
DEV300m43 |
ooo31gsl3_DEV300 |
3.1 showstoppers in gsl |
DEV300m43 |
os129_DEV300 |
OOo 3.1 show stopper |
DEV300m43 |
os2port05 |
CWS for tracking the build of DEV300 under OS/2 |
DEV300m43 |
rptfix04 |
Bugfixing for the SRB libformula and other Pentaho libraries |
DEV300m43 |
sw31a11y01 |
bug fixes/changes for accessibility issues for OOo 3.1 |
DEV300m43 |
tkr18 |
OOo 3.1 (UCB) fixes |
DEV300m43 |
tkr19_DEV300 |
3.1 showstopper fix |
DEV300m43 |
ab61 |
3.1 fixes |
DEV300m42 |
ab66 |
xmlhelp related fixes |
DEV300m42 |
aquafilepicker03 |
To fix some minor glitches with the aqua native file picker |
DEV300m42 |
ause099 |
build related fixes, not product relevant |
DEV300m42 |
aw062 |
BugFixing CWS |
DEV300m42 |
configure23 |
more configure fixes |
DEV300m42 |
cwstestresult |
Provide cwstestresult perl script |
DEV300m42 |
dba31g |
ongoing DBA bug fixing towards OOo 3.1 |
DEV300m42 |
dba31h |
ongoing DBA bugfixing towards 3.1 |
DEV300m42 |
dba31i |
Last 3.1 bug fixes for dba |
DEV300m42 |
dev300m42masterfix |
|
DEV300m42 |
dv07 |
Misc. bug fixes |
DEV300m42 |
extras310 |
Bugfixes regarding the Extras for OOo 3.1/SO9.1. |
DEV300m42 |
fwk100 |
framework and toolkit fixes |
DEV300m42 |
fwk101 |
Fixes for 3.1. |
DEV300m42 |
fwk102 |
Framework fixes for OOo 3.1 |
DEV300m42 |
fwk99 |
Bugfixes for 3.1 |
DEV300m42 |
hb14 |
DOCX bugs |
DEV300m42 |
hb16 |
. |
DEV300m42 |
hde01 |
Bugfixes in testautomation |
DEV300m42 |
hr59_DEV300 |
Fix cross master workspace fetch and rebase problems. |
DEV300m42 |
i18n49 |
. |
DEV300m42 |
ichitaroext |
|
DEV300m42 |
impress166 |
OOo 3.1 Draw/Impress Bugfix Workspace |
DEV300m42 |
impress167 |
Bugfix workspace |
DEV300m42 |
impresshtmlex01 |
some small changes for html export API in impress |
DEV300m42 |
jl115 |
3.1 fixes |
DEV300m42 |
jsc314 |
SDK 3.1 fixes. |
DEV300m42 |
jsc315 |
Fix TabControl |
DEV300m42 |
kashidafix02 |
More fun with complex text layout |
DEV300m42 |
macmiscfixes |
Misc mac OS X fixes |
DEV300m42 |
macmozxmlsec31 |
3.1 version of CWS macmozxmlsec |
DEV300m42 |
macwebdav |
check for locking support in SAL when a webdav volume is mounted with Finder. |
DEV300m42 |
mav44 |
Framework bugfixed for OOo3.1 |
DEV300m42 |
mba31issues01 |
. |
DEV300m42 |
mysql1 |
Enable the generic sdbcx mysql driver to handle the native mysqlc driver. |
DEV300m42 |
native218 |
OOo 3.1 installation tasks. |
DEV300m42 |
native220 |
Changing from OOo 3.0 to OOo 3.1 once more. |
DEV300m42 |
notes8 |
notes bugfixing for 3.1 |
DEV300m42 |
npower11 |
porting api implememtations from ooo-build, change of namespace of vba api |
DEV300m42 |
oooimprovement2 |
adding regular Usage Tracking support into product |
DEV300m42 |
pdfextfix |
Fix some pdf import extension issues |
DEV300m42 |
qascripts05 |
Misc fixes in test scripts. |
DEV300m42 |
sb103 |
misc fixes |
DEV300m42 |
sb104 |
get rid of LD_LIBRARY_PATH in build environment |
DEV300m42 |
sb105 |
late 3.1 fixes |
DEV300m42 |
sb106 |
Broken NTLM authentication |
DEV300m42 |
socs23 |
|
DEV300m42 |
soreadme91 |
last Minute Readme edits |
DEV300m42 |
sw31bf02 |
Writer fixes for OOo3.1 |
DEV300m42 |
sw31bf04 |
bugfixes in Writer for OOo 3.1 |
DEV300m42 |
swftnnumbers02 |
fix for issue 98418 - hindi numerals for footnote numbering in arabic and farsi |
DEV300m42 |
tbe35 |
OOo 3.1 Calc bug fixes |
DEV300m42 |
tbe36 |
OOo 3.1 Calc data changes |
DEV300m42 |
tbo04 |
- Evaluate source version information |
DEV300m42 |
tkr16 |
UCB Issues |
DEV300m42 |
transogl03redux |
Integrate ogltrans opengl slide transitions contributions and make buildable and installable as optional component |
DEV300m42 |
vcl98 |
Bugfixes for 3.1 |
DEV300m42 |
vcl99 |
Fix important 3.1 issues (e.g. RTL specific) |
DEV300m42 |
cmcfixes52 |
Remove some trivial warnings |
DEV300m41 |
cwscheckapi7 |
update knownissue lists for automated UnoAPI-Tests |
DEV300m41 |
cygwin02 |
|
DEV300m41 |
dev300m41masterfix |
|
DEV300m41 |
metropatch01_DEV300 |
|
DEV300m41 |
rt37 |
Build fixes for OOo 3.1 |
DEV300m41 |