If set to true, the groupId of the artifact is appended to the name of the generated Eclipse project. See projectNameTemplate for other options.

If set to true, the version number of the artifact is appended to the name of the generated Eclipse project. See projectNameTemplate for other options.

List of eclipse build commands to be added to the default ones. Old style:

<additionalBuildcommands>
   <buildcommand>org.springframework.ide.eclipse.core.springbuilder</buildcommand>
</additionalBuildcommands>

New style:

<additionalBuildcommands>
   <buildCommand>
     <name>org.ui.externaltools.ExternalToolBuilder</name>
     <triggers>auto,full,incremental,</triggers>
     <arguments>
       <LaunchConfigHandle>&lt;project&gt;./externalToolBuilders/MavenBuilder.launch</LaunchConfighandle>
     </arguments>
   </buildCommand>
</additionalBuildcommands>

Note the difference between buildcommand and buildCommand. You can mix and match old and new-style configuration entries.

Allow to configure additional generic configuration files for eclipse that will be written out to disk when running eclipse:eclipse. FOr each file you can specify the name and the text content.

<plugin>
 <groupId>org.apache.maven.plugins</groupId>
 <artifactId>maven-eclipse-plugin</artifactId>
 <configuration>
  <additionalConfig>
   <file>
     <name>.checkstyle</name>
     <content>
       <![CDATA[<fileset-config file-format-version="1.2.0" simple-config="true">
         <fileset name="all" enabled="true" check-config-name="acme corporate style" local="false">
             <file-match-pattern match-pattern="." include-pattern="true"/>
         </fileset>
         <filter name="NonSrcDirs" enabled="true"/>
       </fileset-config>]]>
     </content>
   </file>
  </additionalConfig>
 </configuration>
</plugin>

Instead of the content you can also define (from version 2.5) an url to download the file :

<plugin>
 <groupId>org.apache.maven.plugins</groupId>
 <artifactId>maven-eclipse-plugin</artifactId>
 <configuration>
  <additionalConfig>
   <file>
     <name>.checkstyle</name>
     <url>http://some.place.org/path/to/file</url>
   </file>
  </additionalConfig>
 </configuration>

or a location :

<plugin>
 <groupId>org.apache.maven.plugins</groupId>
 <artifactId>maven-eclipse-plugin</artifactId>
 <configuration>
  <additionalConfig>
   <file>
    <name>.checkstyle</name>
    <location>/checkstyle-config.xml</location>
   </file>
  </additionalConfig>
 </configuration>
 <dependencies>
  <!-- The file defined in the location is stored in this dependency -->
  <dependency>
   <groupId>eclipsetest</groupId>
   <artifactId>checkstyle-config</artifactId>
   <version>1.0</version>
  </dependency>
 </dependencies>
</plugin>

List of eclipse project facets to be added to the default ones.

<additionalProjectFacets>
   <jst.jsf>1.1<jst.jsf/>
</additionalProjectFacets>

List of eclipse project natures to be added to the default ones.

<additionalProjectnatures>
   <projectnature>org.springframework.ide.eclipse.core.springnature</projectnature>
</additionalProjectnatures>

The version of AJDT for which configuration files will be generated. The default value is "1.5", supported versions are "none" (AJDT support disabled), "1.4", and "1.5".

The default output directory

List of eclipse build commands. By default the org.eclipse.jdt.core.javabuilder builder plus the needed WTP builders are added. If you specify any configuration for this parameter, only those buildcommands specified will be used; the defaults won't be added. Use the additionalBuildCommands parameter for that. Configuration example: Old style:

<buildcommands>
   <buildcommand>org.eclipse.wst.common.modulecore.ComponentStructuralBuilder</buildcommand>
   <buildcommand>org.eclipse.jdt.core.javabuilder</buildcommand>
   <buildcommand>org.eclipse.wst.common.modulecore.ComponentStructuralBuilderDependencyResolver</buildcommand>
</buildcommands>

For new style, see additionalBuildCommands.

List of container classpath entries. By default the org.eclipse.jdt.launching.JRE_CONTAINER classpath container is added. Configuration example:

<classpathContainers>
   <classpathContainer>org.eclipse.jdt.launching.JRE_CONTAINER</classpathContainer>
   <classpathContainer>org.eclipse.jst.server.core.container/org.eclipse.jst.server.tomcat.runtimeTarget/Apache Tomcat v5.5</classpathContainer>
   <classpathContainer>org.eclipse.jst.j2ee.internal.web.container/artifact</classpathContainer>
</classpathContainers>

Enables/disables the downloading of javadoc attachments. Defaults to false. When this flag is true remote repositories are checked for javadocs: in order to avoid repeated check for unavailable javadoc archives, a status cache is mantained. With versions 2.6+ of the plugin to reset this cache run mvn eclipse:remove-cache, or use the forceRecheck option with versions. With older versions delete the file mvn-eclipse-cache.properties in the target directory.

Enables/disables the downloading of source attachments. Defaults to false. When this flag is true remote repositories are checked for sources: in order to avoid repeated check for unavailable source archives, a status cache is mantained. With versions 2.6+ of the plugin to reset this cache run mvn eclipse:remove-cache, or use the forceRecheck option with versions. With older versions delete the file mvn-eclipse-cache.properties in the target directory.

Deprecated. use downloadSources

Enables/disables the downloading of source attachments. Defaults to false. DEPRECATED - use downloadSources

Eclipse workspace directory.

List of artifact to exclude from eclipse classpath, beeing provided by some eclipse classPathContainer [MECLIPSE-79]

Enables/disables the rechecking of the remote repository for downloading source/javadoc attachments. Defaults to false. When this flag is true and the source or javadoc attachment has a status cache to indicate that it is not available, then the remote repository will be rechecked for a source or javadoc attachment and the status cache updated to reflect the new state.

Use this to specify a different generated resources folder than target/generated-resources/rad6. Set to "none" to skip this folder generation.

Limit the use of project references to the current workspace. No project references will be created to projects in the reactor when they are not available in the workspace.

A list of links to local files in the system. A configuration like this one in the pom : <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-eclipse-plugin</artifactId> <configuration> <linkedResources> <linkedResource> <name>src/test/resources/oracle-ds.xml</name> <type>1</type> <location>C://jboss/server/default/deploy/oracle-ds.xml</location> </linkedResource> </linkedResources> </configuration> </plugin> will produce in the .project : <linkedResources> <link> <name>src/test/resources/oracle-ds.xml</name> <type>1</type> <location>C://jboss/server/default/deploy/oracle-ds.xml</location> </link> </linkedResources>

The relative path of the manifest file

The project packaging.

Is it an PDE project? If yes, the plugin adds the necessary natures and build commands to the .project file. Additionally it copies all libraries to a project local directory and references them instead of referencing the files in the local Maven repository. It also ensured that the "Bundle-Classpath" in META-INF/MANIFEST.MF is synchronized.

Allows configuring the name of the eclipse projects. This property if set wins over addVersionToProjectName and addGroupIdToProjectName You can use [groupId], [artifactId] and [version] variables. eg. [groupId].[artifactId]-[version]

List of eclipse project natures. By default the org.eclipse.jdt.core.javanature nature plus the needed WTP natures are added. Natures added using this property replace the default list.

<projectnatures>
   <projectnature>org.eclipse.jdt.core.javanature</projectnature>
   <projectnature>org.eclipse.wst.common.modulecore.ModuleCoreNature</projectnature>
</projectnatures>

Skip the operation when true.

List of exclusions to add to the source directories on the classpath. Adds excluding="" to the classpathentry of the eclipse .classpath file. [MECLIPSE-104]

List of inclusions to add to the source directories on the classpath. Adds including="" to the classpathentry of the eclipse .classpath file.

Java projects will always include "**/*.java"

Ajdt projects will always include "**/*.aj"

[MECLIPSE-104]

When set to false, the plugin will not create sub-projects and instead reference those sub-projects using the installed package in the local repository

The context root of the webapplication. This parameter is only used when the current project is a war project, else it will be ignored.

This eclipse workspace is read and all artifacts detected there will be connected as eclipse projects and will not be linked to the jars in the local repository. Requirement is that it was created with the similar wtp settings as the reactor projects, but the project name template my differ. The pom's in the workspace projects may not contain variables in the artefactId, groupId and version tags. If workspace is not defined, then an attempt to locate it by checking up the directory hierarchy will be made.

JEE context name of the WTP module. ( ex. WEB context name ).

Must the application files be written for ear projects in a separate directory.

What WTP defined server to use for deployment informations.

Must the manifest files be written for java projects so that that the jee classpath for wtp is correct.

The version of WTP for which configuration files will be generated. The default value is "none" (don't generate WTP configuration), supported versions are "R7", "1.0", and "1.5"