Set the timer resolution. The default timer resolution is 20 milliseconds. This means that a search required to take no longer than 800 milliseconds may be stopped after 780 to 820 milliseconds.
Note that:

• Finer (smaller) resolution is more accurate but less efficient.
• Setting resolution to less than 5 milliseconds will be silently modified to 5 milliseconds.
• Setting resolution smaller than current resolution might take effect only after current resolution. (Assume current resolution of 20 milliseconds is modified to 5 milliseconds, then it can take up to 20 milliseconds for the change to have effect.

public static void SetResolution(
	uint newResolution
)

Public Shared Sub SetResolution ( _
	newResolution As UInteger _
)

public:
static void SetResolution(
	unsigned int newResolution
)