This document describes Axis2's Remote Procedure Call support in a set of easy to understand implementation steps.
Axis2 Remote Procedure Call (RPC) support may seem somewhat tricky and confusing at first glance. However, Axis2 RPC strategy is based on a set of well defined rules. This document aims to drill down to the details of the strategy and resolve most of the unknown bits and pieces. Note that Axis2 currently does not support the rpc/encoded style. But it fully supports the rpc/literal style.
We will discuss the Axis2 RPC strategy in the following steps
This is probably the most confusing part of the RPC strategy. Since the Axis2 code generator is based on pure doc/lit style, the first step of the code generation process is to generate a wrapper schema. This wrapper generation can be easily explained by using an example.
Take the following piece of WSDL
.....
<message name="requestMessage">
<part name="part1" type="xs:string"/>
<part name="part2" type="xs:int"/>
</message>
<message name="responseMessage">
<part name="part1" type="xs:string"/>
</message>
<portType name="echoPortType">
<operation name="echo">
<input message="y:requestMessage"/>
<output message="y:responseMessage"/>
</operation>
</portType>
<binding name="echoBinding" type="y:echoPortType">
<soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="echo">
<soap:operation soapAction="echo"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
</operation>
</binding>
.....
The binding says rpc/lit is required and in this case the message parts will need wrapping in the following order:
For example, the input wire message for the echo operation mentioned in the above WSDL fragment would look like this:
<op:echo xmlns:op="porttype namespace"> <part1>Hello World</part1> <part2>123</part2> </op:echo>
Note that the element name is in bold. The first one is the operation name, the second and third are part names. It can be seen that it is possible to generate a schema representing this structure, and then treat the whole service as a pure doc/lit service. In this case, the following piece of schema is generated to make the rpc to doc conversion. Note that in this case the wire message stays unchanged. It is only a different WSDL authoring style
<xs:element name="echo">
<xs:complexType>
<xs:sequence>
<xs:element name="part1" type="xs:string" />
<xs:element name="part2" type="xs:int" />
</xs:sequence>
</xs:complexType>
</xs:element>
What the Axis2 code generator does is exactly this. By looking at the binding style, it generates a wrapper schema in places required before handing over the Axis* hierarchy to the code generator engine. In every case (even when the schema needs to be unwrapped) this wrapping part will take place!
If the schema needs to be unwrapped, it brings up a few issues. This is mainly because the only thing that the emitters rely on when generating code is a mapping table.
Given these solutions, the first step in unwrapping is to walk the schema and figure out the unwrappable items. The key player of the unwrapping process is the unwrapping extension. It walks a given schema and figure out the unwrappable parts if there are any.
The current unwrapper looks for the following patterns and fails if it is not found!
< element >
< complexType >
< sequence >
< element />
< /sequence >
< /complexType >
< /element >
Once this pattern is detected, the unwrapper details will be added to the relevant AxisMessage component.
The next step is to populate the Type information for the parts. This has to be explicitly done by the data binding extensions, and currently the ADB and XMLbeans extensions populate the relevant AxisMessage by looking up their generated type systems. This type information goes into the AxisMessage inside a MessagePartInformationHolder instance.
The following code fragment from the ADB extension shows how the AxisMessages get populated with the relevant type information. The code is almost the same for the XMLBeans extension. Note the items in bold.
if (message.getParameter(Constants.UNWRAPPED_KEY) != null) {
XmlSchemaType schemaType = message.getSchemaElement().getSchemaType();
if (schemaType instanceof XmlSchemaComplexType) {
XmlSchemaComplexType cmplxType = (XmlSchemaComplexType) schemaType;
XmlSchemaParticle particle = cmplxType.getParticle();
if (particle instanceof XmlSchemaSequence) {
XmlSchemaObjectCollection items =
((XmlSchemaSequence) particle).getItems();
for (Iterator i = items.getIterator(); i.hasNext();) {
Object item = i.next();
if (item instanceof XmlSchemaElement) {
XmlSchemaElement xmlSchemaElement = (XmlSchemaElement) item;
XmlSchemaType eltSchemaType = xmlSchemaElement.getSchemaType();
if (eltSchemaType != null) {
populateClassName(eltSchemaType,mapper,opName,xmlSchemaElement.getName());
} else if (xmlSchemaElement.getSchemaTypeName() != null) {
eltSchemaType = findSchemaType(schemaMap,
xmlSchemaElement.getSchemaTypeName());
if (eltSchemaType!=null){
populateClassName(eltSchemaType,mapper,opName,xmlSchemaElement.getName());
}
}
}
}
}
}
}
The populateClassName looks like this
private static void populateClassName(XmlSchemaType eltSchemaType,
TypeMapper typeMap,
String opName,
String partName) {
Map metaInfoMap = eltSchemaType.getMetaInfoMap();
if (metaInfoMap != null) {
String className = (String) metaInfoMap.
get(SchemaConstants.SchemaCompilerInfoHolder.CLASSNAME_KEY);
QName partQName = WSDLUtil.getPartQName(opName,
WSDLConstants.INPUT_PART_QNAME_SUFFIX,
partName);
typeMap.addTypeMappingName(partQName,className);
if (Boolean.TRUE.equals(
metaInfoMap.get(SchemaConstants.
SchemaCompilerInfoHolder.CLASSNAME_PRIMITVE_KEY))){
//this type is primitive - add that to the type mapper status
//for now lets add a boolean
typeMap.addTypeMappingStatus(partQName,Boolean.TRUE);
}
}
}
The next step is generating the actual code. The AxisServiceBasedMultiLanguageEmitter has a method that generates the XML model for the input parameters, and that method includes the relevant part parameters inside the relavant top level input parameter element.
The relevant part of the XML model looks like this. Note that this intermediate XML model is the one that is parsed against the Stylesheets to generate the code.
<input>
<param name="param4" type="com.example.www.ServiceNameStub.Echo" shorttype="Echo" value="null" location="body" opname="echo">
<param name="param5" type="java.lang.String" shorttype="String" value="null" location="body" opname="echo" partname="Part1"
primitive="yes"/>
<param name="param6" type="int" shorttype="int" value="0" location="body" opname="echo" partname="Part2" primitive="yes"/>
</param>
</input>
The next part is handled by the template. Basically, the template looks after the generation of multiple parameters into the method signatures, and then the generating of the relevant serialization and deserialization code for the parameters.
This is a somewhat controversial area. The current Axis2 code generator does the wrapping and unwrapping at the object level and not the XML level. In short, the exploded parameters are only a convenience and the explosion does not run down to the XML level. The following example of generated source code makes this clear:
private org.apache.axiom.soap.SOAPEnvelope toEnvelope(
org.apache.axiom.soap.SOAPFactory factory, java.lang.String param1,
int param2, boolean optimizeContent) {
com.example.www.ServiceNameStub.Echo wrappedType = new com.example.www.ServiceNameStub.Echo();
wrappedType.setPart1(param1);
wrappedType.setPart2(param2);
rg.apache.axiom.soap.SOAPEnvelope emptyEnvelope = factory.getDefaultEnvelope();
emptyEnvelope.getBody().addChild(wrappedType.getOMElement(
com.example.www.ServiceNameStub.Echo.MY_QNAME, factory));
return emptyEnvelope;
}
Note the lines in bold. The wrapped class will anyway be instantiated and used at the end, but what the user sees is different. Exploding the parameters happens in a similar way!
Axis2 RPC support is sort of a misty area, but it is based on a well defined set of rules which makes it not that misty after all!