# Licensed to the Apache Software Foundation (ASF) under one # or more contributor license agreements. See the NOTICE file # distributed with this work for additional information # regarding copyright ownership. The ASF licenses this file # to you under the Apache License, Version 2.0 (the # "License"); you may not use this file except in compliance # with the License. You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, # software distributed under the License is distributed on an # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY # KIND, either express or implied. See the License for the # specific language governing permissions and limitations # under the License. # ------------------------------------------------------------------- # $Id$ # # This is the configuration file for Turbine. # # Note that strings containing "," (comma) characters must backslash # escape the comma (i.e. '\,') # # ------------------------------------------------------------------- # ------------------------------------------------------------------- # # L O G 4 J - L O G G I N G # # ------------------------------------------------------------------- log4j.file = /WEB-INF/conf/Log4j.properties # ------------------------------------------------------------------- # # M A I L S E R V E R # # ------------------------------------------------------------------- # Your mail server for outgoing email. # # Default: null # ------------------------------------------------------------------- mail.server= # ------------------------------------------------------------------- # SMTP-From header for your outgoing messages # # All failed delivery messages will be returned to this address. # If unset, these messages will be sent to the address in the # From header (standard behaviour) # # Default: null # ------------------------------------------------------------------- mail.smtp.from= # ------------------------------------------------------------------- # # S E R V E R D A T A # # ------------------------------------------------------------------- # Default ServerData that can be used if asked for before the first # request is made. # # Defaults: # # serverdata.default.serverName= # serverdata.default.serverPort=80 # serverdata.default.serverScheme=http # serverdata.default.scriptName= # serverdata.default.contextPath= # ------------------------------------------------------------------- serverdata.default.serverName= serverdata.default.serverPort=80 serverdata.default.serverScheme=http serverdata.default.scriptName= serverdata.default.contextPath= # ------------------------------------------------------------------- # # M O D U L E C A C H I N G # # ------------------------------------------------------------------- # This determines whether or not to cache the modules in memory. For # development, turn this off. For production, turn this on. # # Default: false # ------------------------------------------------------------------- module.cache=false # If module.cache=true, then how large should we make the hashtables # by default. action.cache.size=20 layout.cache.size=10 navigation.cache.size=10 page.cache.size=5 screen.cache.size=50 scheduledjob.cache.size=10 # ------------------------------------------------------------------- # # M O D U L E P A C K A G E S # # ------------------------------------------------------------------- # This is the "classpath" for Turbine. In order to locate your own # modules, you should add them to this path. For example, if you have # com.company.actions, com.company.screens, com.company.navigations, # then this setting would be "com.company,org.apache.turbine.modules". # This path is searched in order. For example, Turbine comes with a # screen module named "Login". If you wanted to have your own screen # module named "Login", then you would specify the path to your # modules before the others. # # Note: org.apache.turbine.modules will always be added to the search # path. If it is not explictly added here, it will be added to the # end. # # Default: org.apache.turbine.modules # ------------------------------------------------------------------- module.packages=org.apache.turbine.modules # ------------------------------------------------------------------- # # D A T A B A S E S E T T I N G S # # ------------------------------------------------------------------- # Turbine uses the decoupled torque now!! # The database settings are now in Torque.properties # ------------------------------------------------------------------- # ------------------------------------------------------------------- # # F R A M E W O R K S E T T I N G S # # ------------------------------------------------------------------- # These are settings that control the behaviour of the framework, # such as determining whether a template system is in use, what # the default templates and screens are and session handling settings. # ------------------------------------------------------------------- # Used to set the template homepage if you are using a template # layout. This is the template that will be displayed to the user # when no specific template is requested. This is normally executed # as the first template the user sees when they access the system. # # Default: Index.vm template.homepage=Index.vm # This is the default screen to show to people when they first access # the system. This is only used if there is no value for # template.homepage. This is for use when you are not using a # templating system such as Velocity or JSP. # # Default: Login screen.homepage= # This is the template that is shown on an incorrect login attempt. # Setting this property will override any value of screen.login specfied # below. # # Default: Login.vm template.login=Login.vm # This is the page that is shown on an incorrect login attempt. It is # referenced in the LoginUser action. This is only used if there is no value # for template.login. This is for use when you are not using a # templating system such as Velocity or JSP. # # Default: Login screen.login= # This is the template that is used by the respective Template based # ErrorScreen for displaying the error. If you are not using a Template based # ErrorScreen, then this is ignored. # # Default: Error.vm template.error=Error.vm # This is the default error screen. # # Default: VelocityErrorScreen screen.error=VelocityErrorScreen # This is the screen that is displayed when the user's web page is in # an invalid state. # # Default: error.InvalidState screen.invalidstate=error.InvalidState # Set the components of the default Doctype for use in html documents. # # Defaults: There are no defaults - if default.html.doctype.root.element is not # set then no default doctype will be available. default.html.doctype.root.element=HTML default.html.doctype.identifier=-//W3C//DTD HTML 4.01 Transitional//EN default.html.doctype.url=http://www.w3.org/TR/1999/REC-html401-19991224/loose.dtd # This is the default action to log a user in. If you write your own # implementation of the login action, make sure that you change this # to reflect the new name. action.login=LoginUser # This is the default action to log a user out. If you write your own # implementation of the logout action, make sure that you change this # to reflect the new name. action.logout=LogoutUser # This is the default action to validate whether or not a session is # valid. For example, if you want to make sure if a user has already # logged in or not. # # Default: SessionValidator action.sessionvalidator=sessionvalidator.TemplateSessionValidator # This is the timeout in seconds for sessions. If left commented out, the # servlet container's default timeout will be left as is. # session.timeout=1800 # This is the default action that builds up the AccessControlList for # the individual users session. action.accesscontroller=AccessController # # Set this value to true if you want to be able to submit multiple # events to an Action by doing eventSubmit_do and consider # only events that have a non-empty, non-zero value. This is useful # if you submit your form with JavaScript # action.eventsubmit.needsvalue = false # If the web container does not supply an explicit encoding for the # request data, assume that is has this encoding. If you use e.g. # UTF-8 or ISO-8859-, change this parameter to keep your # special characters. Default is ISO-8859-1 input.encoding = ISO-8859-1 # ------------------------------------------------------------------- # # J N D I C O N T E X T S # # ------------------------------------------------------------------- # This indicates whether Turbine should try to create JNDI contexts. # # Default: false # # contexts=true # These are the JNDI context properties. Each context's properties # are defined by the properties beginning with context.name. # # Default: none # # Example: The following will create a JNDI context named "name" in # the data.contexts Hashtable. It will point at the RMI registry on # localhost running on port 1099, and will use # com.sun.jndi.rmi.registry.RegistryContextFactory as the initial # context factory: # # context.name.java.naming.provider.url=rmi://localhost:1099 # context.name.java.naming.factory.initial=com.sun.jndi.rmi.registry.RegistryContextFactory # ------------------------------------------------------------------- # # P E E R S # # ------------------------------------------------------------------- # Supplies Turbine with information about the database schema, which # can simplify any required Peer classes. # # Default: org.apache.turbine.util.db.map.TurbineMapBuilder # ------------------------------------------------------------------- database.maps.builder=org.apache.turbine.util.db.map.TurbineMapBuilder # ------------------------------------------------------------------- # # M E S S A G E S # # ------------------------------------------------------------------- # Note that strings containing "," (comma) characters must backslash # escape the comma (i.e. '\,') # The message that can be displayed before a user logs in. login.message=Thank you for your visit. Please log into the system. # The message that can be displayed when no screen is defined. login.message.noscreen=There has been an error. Your session is valid but the screen variable is not defined. # The message that can be displayed when a user enters an incorrect # password or username. login.error=Sorry your username or password is incorrect! # The message that can be displayed when a user logs out. logout.message=Thank you for using the system. Please come back soon. # ------------------------------------------------------------------- # # S E C U R E S O C K E T S L A Y E R # # ------------------------------------------------------------------- # Whether the web server is able to use SSL. Links in Turbine can # check this property to determine if SSL can be used. # # Default: true # ------------------------------------------------------------------- use.ssl=true # ------------------------------------------------------------------- # # S E R V I C E S # # ------------------------------------------------------------------- # Classes for Turbine Services should be defined here. # Format: services.[name].classname=[implementing class] # # To specify properties of a service use the following syntax: # service.[name].[property]=[value] # # The order that these services is listed is important! The # order that is stated here is the order in which the services # will be initialized. Keep this is mind if you have services # that depend on other services during initialization. # ------------------------------------------------------------------- services.AvalonComponentService.classname=org.apache.turbine.services.avaloncomponent.TurbineAvalonComponentService services.CryptoService.classname=org.apache.turbine.services.crypto.TurbineCryptoService services.FactoryService.classname=org.apache.turbine.services.factory.TurbineFactoryService services.PoolService.classname=org.apache.turbine.services.pool.TurbinePoolService services.RunDataService.classname=org.apache.turbine.services.rundata.TurbineRunDataService services.ServletService.classname=org.apache.turbine.services.servlet.TurbineServletService services.AssemblerBrokerService.classname=org.apache.turbine.services.assemblerbroker.TurbineAssemblerBrokerService services.LocalizationService.classname=org.apache.turbine.services.localization.TurbineLocalizationService services.MimeTypeService.classname=org.apache.turbine.services.mimetype.TurbineMimeTypeService services.GlobalCacheService.classname=org.apache.turbine.services.cache.TurbineGlobalCacheService services.SchedulerService.classname=org.apache.turbine.services.schedule.TurbineSchedulerService services.XmlRpcService.classname=org.apache.turbine.services.xmlrpc.TurbineXmlRpcService services.UniqueIdService.classname=org.apache.turbine.services.uniqueid.TurbineUniqueIdService services.UploadService.classname=org.apache.turbine.services.upload.TurbineUploadService services.SecurityService.classname=org.apache.turbine.services.security.db.DBSecurityService services.PullService.classname=org.apache.turbine.services.pull.TurbinePullService # services.IntakeService.classname=org.apache.turbine.services.intake.TurbineIntakeService services.TemplateService.classname=org.apache.turbine.services.template.TurbineTemplateService services.UIService.classname = org.apache.turbine.services.ui.TurbineUIService services.XSLTService.classname=org.apache.turbine.services.xslt.TurbineXSLTService # services.SessionService.classname=org.apache.turbine.services.session.TurbineSessionService # Turn on the appropriate template service. services.VelocityService.classname=org.apache.turbine.services.velocity.TurbineVelocityService # ------------------------------------------------------------------- # # R U N D A T A S E R V I C E # # ------------------------------------------------------------------- # Default implementations of base interfaces for request processing. # Additional configurations can be defined by using other keys # in the place of the key. # ------------------------------------------------------------------- services.RunDataService.default.run.data=org.apache.turbine.services.rundata.DefaultTurbineRunData services.RunDataService.default.parameter.parser=org.apache.turbine.util.parser.DefaultParameterParser services.RunDataService.default.cookie.parser=org.apache.turbine.util.parser.DefaultCookieParser # ------------------------------------------------------------------- # # C A C H E S E R V I C E # # ------------------------------------------------------------------- # Interval at which the cache will be checked. The default is # 5000ms or 5 seconds. services.GlobalCacheService.cache.check.frequency = 5000 # ------------------------------------------------------------------- # # A S S E M B L E R B R O K E R S E R V I C E # # ------------------------------------------------------------------- # A list of AssemblerFactory classes that will be registered # with TurbineAssemblerBrokerService # ------------------------------------------------------------------- services.AssemblerBrokerService.screen=org.apache.turbine.services.assemblerbroker.util.java.JavaScreenFactory # services.AssemblerBrokerService.screen=org.apache.turbine.services.assemblerbroker.util.python.PythonScreenFactory services.AssemblerBrokerService.action=org.apache.turbine.services.assemblerbroker.util.java.JavaActionFactory services.AssemblerBrokerService.layout=org.apache.turbine.services.assemblerbroker.util.java.JavaLayoutFactory services.AssemblerBrokerService.page=org.apache.turbine.services.assemblerbroker.util.java.JavaPageFactory services.AssemblerBrokerService.navigation=org.apache.turbine.services.assemblerbroker.util.java.JavaNavigationFactory services.AssemblerBrokerService.scheduledjob=org.apache.turbine.services.assemblerbroker.util.java.JavaScheduledJobFactory # ------------------------------------------------------------------- # # T E M P L A T E S E R V I C E # # ------------------------------------------------------------------- # Roughly, the number of templates in each category. # # Defaults: layout=2, navigation=10, screen=50 services.TemplateService.layout.cache.size=2 services.TemplateService.navigation.cache.size=10 services.TemplateService.screen.cache.size=50 # # These are the mapper classes responsible for the lookup of Page, Screen, Layout and Navigation classes according # to the supplied template Name. They also map template names on the Layout and Screen file names to be used. # # services.TemplateService.mapper.page.class = org.apache.turbine.services.template.mapper.DirectTemplateMapper # services.TemplateService.mapper.screen.class = org.apache.turbine.services.template.mapper.ClassMapper # services.TemplateService.mapper.layout.class = org.apache.turbine.services.template.mapper.ClassMapper # services.TemplateService.mapper.navigation.class = org.apache.turbine.services.template.mapper.ClassMapper # services.TemplateService.mapper.layout.template.class = org.apache.turbine.services.template.mapper.LayoutTemplateMapper # services.TemplateService.mapper.screen.template.class = org.apache.turbine.services.template.mapper.ScreenTemplateMapper # ------------------------------------------------------------------- # # P U L L S E R V I C E # # ------------------------------------------------------------------- # These are the properties for the Pull Service, the service # that works in conjuction with the Turbine Pull Model API. # ------------------------------------------------------------------- services.PullService.earlyInit= true # This determines whether the non-request tools are refreshed # on each request (request tools aren't ever, because they're # instantiated for the request only anyway). services.PullService.tools.per.request.refresh=true # Path to the resources of the application tools, relative to the # application root # services.PullService.tools.resources.dir=/resources/ # These are tools that are placed in the context by the service # These tools will be made available to all your # templates. You list the tools in the following way: # # tool.. = # # is the tool scope: global, request, session # or persistent (see below for more details) # is the name of the tool in the context # # You can configure the tools in this way: # tool.. = # # So if you find "global", "request", "session" or "persistent" as second # part, it is a configuration to put a tool into the toolbox, else it is a # tool specific configuration. # # For example: # # tool.global.ui = org.apache.turbine.util.pull.tools.UITool # tool.global.mm = org.apache.turbine.util.pull.MessageManager # tool.request.link = org.apache.turbine.services.pull.tools.TemplateLink # tool.request.page = org.apache.turbine.util.template.HtmlPageAttributes # # Then: # # tool.ui.skin = default # # configures the value of "skin" for the "ui" tool. # # Tools are accessible in all templates by the given # to the tool. So for the above listings the UITool would # be available as $ui, the MessageManager as $mm, the TemplateLink # as $link and the HtmlPageAttributes as $page. # # You should avoid using tool names called "global", "request", # "session" or "persistent" because of clashes with the possible Scopes. # # Scopes: # # global: tool is instantiated once and that instance is available # to all templates for all requests. Tool must be threadsafe. # # request: tool is instantiated once for each request (although the # PoolService is used to recycle instances). Tool need not # be threadsafe. # # session: tool is instantiated once for each user session, and is # stored in the user's temporary hashtable. Tool should be # threadsafe. # # authorized: tool is instantiated once for each user session once the # user logs in. After this, it is a normal session tool. # # persistent: tool is instantiated once for each user session once # the user logs in and is is stored in the user's permanent # hashtable. # This means for a logged in user the tool will be persisted # in the user's objectdata. Tool should be Serializable. These # tools do not need to be threadsafe. # persistent scope tools are deprecated in 2.3 # # Defaults: none tool.request.link=org.apache.turbine.services.pull.tools.TemplateLink tool.request.page=org.apache.turbine.util.template.HtmlPageAttributes tool.request.content=org.apache.turbine.services.pull.tools.ContentTool tool.request.l10n=org.apache.turbine.services.localization.LocalizationTool # This pull tool is to allow for easy formatting of Date object into Strings tool.request.dateFormatter=org.apache.turbine.services.pull.util.DateFormatter # Use this tool if you need a place to store data that will persist between # requests. Any data stored using this tool will be stored in the session. tool.session.sessionData=org.apache.turbine.services.pull.util.SessionData # These are intake tools. # tool.request.om=org.apache.turbine.om.OMTool # tool.request.intake=org.apache.turbine.services.intake.IntakeTool # This is a tool that allows access to the scheduler service. # tool.request.scheduler=org.apache.turbine.services.SchedulerTool # The UITool will allow you to skin your Turbine application using simple # properties files that are located in the WEBAPP/resources/ directory # hierarchy. tool.global.ui=org.apache.turbine.services.pull.tools.UITool # Path to the UI resources, relative to the resources directory defined above # tool.ui.dir.skin=/ui/skins # Path to the images of a skin, relative to the skin directory defined above # tool.ui.dir.image=/images # Default CSS file for a skin # tool.ui.css=skin.css # Default skin name # tool.ui.skin=default # # The ui tool normally returns absolute URIs. # Setting this property to true allows you to change the behaviour if you # want only relative URIs (e.g. if you run behind a reverse proxy or a load # balancer). # tool.ui.want.relative=false # # The content tool can put its URIs through the Servlet container, # which might attach things like the jsessionid even to URIs that # are not served by the container. # # The default behaviour was not to put these through the container. # # Set this to true if you need things like jsessionid attached to all # links generated from the $content pull tool. # tool.content.want.encoding = false # # Both the link and the content tool normally return absolute URIs # You can change this by exchanging the tool classes but this is not # really recommended. Setting these properties to true allow you # to change the behaviour if you want only relative URIs (e.g. if you # run behind a reverse proxy or a load balancer). # tool.content.want.relative = false tool.link.want.relative = false # ------------------------------------------------------------------- # # V E L O C I T Y S E R V I C E # # ------------------------------------------------------------------- services.VelocityService.earlyInit= true # The location of Velocity configuration file, relative to webapp root # These properties will override the default properties set by Velocity. # You should specify the path to the templates directories as well as # the path to the log file and they should also be relative to webapp root services.VelocityService.template.extension=vm services.VelocityService.default.page = VelocityPage services.VelocityService.default.screen=VelocityScreen services.VelocityService.default.layout = VelocityOnlyLayout services.VelocityService.default.navigation=VelocityNavigation services.VelocityService.default.error.screen = VelocityErrorScreen services.VelocityService.default.layout.template = Default.vm # # Set this to true to catch Velocity Errors and display them in the log file services.VelocityService.catch.errors = true services.VelocityService.runtime.log=/logs/velocity.log # services.VelocityService.input.encoding=UTF-8 services.VelocityService.velocimacro.library = GlobalMacros.vm services.VelocityService.velocimacro.library = macros/TurbineMacros.vm # Set the following line to true to cause velocity to automatically reload # library macro files if they change. This is useful for debugging. services.VelocityService.velocimacro.library.autoreload = false services.VelocityService.resource.loader = file services.VelocityService.file.resource.loader.description = Velocity File Resource Loader services.VelocityService.file.resource.loader.class = org.apache.velocity.runtime.resource.loader.FileResourceLoader services.VelocityService.file.resource.loader.path = /templates/app services.VelocityService.file.resource.loader.cache = false services.VelocityService.file.resource.loader.modificationCheckInterval = 2 # # Do not remove the class path loader lightly, it is used to load the TurbineMacros from VelocityOnlyLayout # services.VelocityService.resource.loader = classpath services.VelocityService.classpath.resource.loader.description = Velocity Classpath Resource Loader services.VelocityService.classpath.resource.loader.class = org.apache.velocity.runtime.resource.loader.ClasspathResourceLoader # ------------------------------------------------------------------- # # J S P S E R V I C E # # ------------------------------------------------------------------- services.JspService.template.extension=jsp services.JspService.default.page = JspPage services.JspService.default.screen=BaseJspScreen services.JspService.default.layout = JspLayout services.JspService.default.navigation=BaseJspNavigation services.JspService.default.error.screen = JspErrorScreen services.JspService.default.layout.template = Default.jsp services.JspService.templates = /templates/app services.JspService.buffer.size = 8192 # ------------------------------------------------------------------- # # U P L O A D S E R V I C E # # ------------------------------------------------------------------- # Whether the files should be automatically picked up by # ParameterParser. services.UploadService.automatic=true # # The directory where files will be temporarily stored. # services.UploadService.repository=. # # The maximum size of a request that will be processed. # services.UploadService.size.max=1048576 # # The maximum size of a request that will have it's elements cached in # memory by TurbineUploadService class. # services.UploadService.size.threshold=10240 # ------------------------------------------------------------------- # # L O C A L I Z A T I O N S E R V I C E # # ------------------------------------------------------------------- # Default ResourceBundle and language/country codes used by the # TurbineLocalizationService. # locale.default.bundle=MyBundle locale.default.language=en locale.default.country=US # # This will set the charset= portion of the ContentType: header. # Leave commented out unless you want to return stuff as a different # charset. # # locale.default.charset= # ------------------------------------------------------------------- # # M I M E T Y P E S E R V I C E # # ------------------------------------------------------------------- # This property specifies a file containing mappings between MIME # content types and the corresponding file name extensions. The # service itself contains a hardcoded set of most common mappings. # The file must use the same syntax as the mime.types file of # the Apache Server, i.e. # ... # # services.MimeTypeService.mime.types=/WEB-INF/conf/mime.types # This property specifies a file containing mappings between locales # and the corresponding character encodings. The service itself # contains a hardcoded set of most common mappings. # The file should use the Java property file syntax, i.e. # = # # services.MimeTypeService.charsets=/WEB-INF/conf/charset.properties # ------------------------------------------------------------------- # # S C H E D U L E R S E R V I C E # # ------------------------------------------------------------------- # # Set enabled to true to start the scheduler. The scheduler can be # stopped and started after Turbine has been intialized. See the # javadocs for org.apache.turbine.services.schedule.TurbineScheduler # for the methods calls. # # Default = false # services.SchedulerService.enabled=false # Determines if the scheduler service should be initialized early. This # Should always be set to true!!!! services.SchedulerService.earlyInit=true # ------------------------------------------------------------------- # # C R Y P T O S E R V I C E # # ------------------------------------------------------------------- # # Standard Unix crypt(3) password encryption. # services.CryptoService.algorithm.unix = org.apache.turbine.services.crypto.provider.UnixCrypt # # This providers allows access to the Java Message Digest encryption algorithms # services.CryptoService.algorithm.java = org.apache.turbine.services.crypto.provider.JavaCrypt # # This is a simple, cleartext "encryption" provider. # services.CryptoService.algorithm.cleartext = org.apache.turbine.services.crypto.provider.ClearCrypt # # Use this provider if you upgrade from Turbine 2.1 to current. It provides bug-to-bug # compatibility for passwords created with the old Security Service. See the javadocs for # OldJavaCrypt # services.CryptoService.algorithm.oldjava = org.apache.turbine.services.crypto.provider.OldJavaCrypt # # This is the default crypto provider. It implements the normal Java MessageDigest ciphers # You need not to have this, it is the default if no algorithms are given. The default # provider gives you all the Java MessageDigest Ciphers # services.CryptoService.algorithm.default = org.apache.turbine.services.crypto.provider.JavaCrypt # ------------------------------------------------------------------- # # S E C U R I T Y S E R V I C E # # ------------------------------------------------------------------- # # This is the class that implements the UserManager interface to # manage User objects. Default is the UserManager from the # DBSecurityService. # Override this setting if you want your User information stored # on a different medium (LDAP directory is a good example). # # Adjust this setting if you change the Setting of the SecurityService class (see above). # Default: org.apache.turbine.services.security.db.DBUserManager services.SecurityService.user.manager = org.apache.turbine.services.security.db.DBUserManager # # These are the default classes used by the Security Service to # provide User, Group, Role and Permission objects. # You want to override this setting only if you want your # implementation to provide application specific addtional # functionality. # # For LDAP use: # services.SecurityService.user.class=org.apache.turbine.services.security.ldap.LDAPUser # LDAP does not yet provide custom Group, User and Role objects so you # must use it with the default TurbineGroup, TurbineRole and # TurbinePermission objects. # # Class for User. Default: org.apache.turbine.om.security.TurbineUser services.SecurityService.user.class=org.apache.turbine.om.security.TurbineUser # Class for Group. Default: org.apache.turbine.om.security.TurbineGroup services.SecurityService.group.class=org.apache.turbine.om.security.TurbineGroup # Class for Role. Default: org.apache.turbine.om.security.TurbineRole services.SecurityService.role.class=org.apache.turbine.om.security.TurbineRole # Class for Permission. Default: org.apache.turbine.om.security.TurbinePermission services.SecurityService.permission.class=org.apache.turbine.om.security.TurbinePermission # # This is the class that implements the ACL interface. # You want to override this setting only if you want your ACL # implementation to provide application specific addtional # functionality. # # Default: org.apache.turbine.util.security.TurbineAccessControlList services.SecurityService.acl.class = org.apache.turbine.util.security.TurbineAccessControlList # # This setting is DBSecurityService specific - this class is consulted for the names # of the columns in the users' tables for the purpose of creating join queries. # If you use your own User implementation in conjunction with DBSecurityService, # it's peer class must implement org.apache.turbine.om.security.peer.UserPeer interface, # and you need to specify the name of the peer class here. # # Default: org.apache.turbine.om.security.peer.TurbineUserPeer # services.SecurityService.userPeer.class=org.apache.turbine.om.security.peer.TurbineUserPeer # # This is used by the SecurityService to make the password checking # secure. When enabled, passwords are transformed by a one-way # function into a sequence of bytes that is base64 encoded. # It is impossible to guess the plain-text form of the password # from the representation. When user logs in, the entered password # is transformed the same way and then compared with stored value. # # Default: false # services.SecurityService.secure.passwords=false # # This property lets you choose what digest algorithm will be used # for encrypting passwords. Check documentation of your JRE for # available algorithms. # # Default: SHA # services.SecurityService.secure.passwords.algorithm=SHA # Configuration for the LDAP Security Service implementation # services.SecurityService.ldap.security.athentication=simple # services.SecurityService.ldap.port= # services.SecurityService.ldap.host= # services.SecurityService.ldap.admin.username= # services.SecurityService.ldap.admin.password= # services.SecurityService.ldap.user.basesearch= # services.SecurityService.ldap.user.search.filter= # services.SecurityService.ldap.dn.attribute=userPrincipalName # services.SecurityService.ldap.provider=com.sun.jndi.ldap.LdapCtxFactory # # This property specifies the type of security authentication # # Default: simple # # services.SecurityService.ldap.security.authentication=simple # # The host name where the LDAP server is listenting. # # Default: localhost # # services.SecurityService.ldap.host=localhost # # The port number where the LDAP server is listenting. # # Default: 389 # # services.SecurityService.ldap.port=389 # # The user name of the admin user. The admin user should be able to # read from the LDAP repository. # Characteres '/' are replaced by '=' and '%' are replaced by ','. # # Default: none # # services.SecurityService.ldap.admin.username=turbineUserUniqueId/turbine%dc/example%dc/com # # The password of the admin user. # # Default: none # # services.SecurityService.ldap.admin.password=turbine # # The class name of the ldap provider. # # Default: com.sun.jndi.ldap.LdapCtxFactory # # services.SecurityService.ldap.provider=com.sun.jndi.ldap.LdapCtxFactory # # The directory base to search. # '/' are replaced by '=' and '%' are replaced by ','. # # Default: none # # services.SecurityService.ldap.basesearch=dc/example%dc/com # # The unique id. It must be an integer field and it is required only when # the users are in LDAP but the groups, roles and permissions are in the # Database. # # services.SecurityService.ldap.user.userid= # # This property maps the username with an attribute in LDAP. # # Default: turbineUserUniqueId # # services.SecurityService.ldap.user.username=turbineUserUniqueId # # This property maps the firstname with an attribute in LDAP. # # Default: turbineUserFirstName # # services.SecurityService.ldap.user.firstname=turbineUserFirstName # # This property maps the lastname with an attribute in LDAP. # # Default: turbineUserLastName # # services.SecurityService.ldap.user.lastname=turbineUserLastName # # This property maps the email with an attribute in LDAP. # # Default: turbineUserMailAddress # # services.SecurityService.ldap.user.email=turbineUserMailAddress # # This property maps the userPassword with an attribute in LDAP. # # Default: none # # services.SecurityService.ldap.user.password=userPassword # ------------------------------------------------------------------- # # X M L R P C S E R V I C E # # ------------------------------------------------------------------- # This property specifies which class should be used to parse # xml for XmlRpc functionality. # # Default: org.apache.xerces.parsers.SAXParser services.XmlRpcService.parser=org.apache.xerces.parsers.SAXParser # This property specifies which network interface the server part of # XmlRpc should bind to (if it is active). If not specified, the # server will bind to all addresses configured for your host. # # Default: 127.0.0.1 # services.XmlRpcService.address=127.0.0.1 # This property specifies which TCP port the web server part of # XmlRpc should listen on (if it is active). # # Default: 12345 services.XmlRpcService.port=12345 # If any classes are specified here, the Service will create an # instance of them here and start up a listener on the specified # port. # # Note that the handlers demonstrated are not very useful. You # will have to invent your own services. They do however # illustrate that any class with a default constructor can be # added here # # The handler parameter without further extension determines # the default handler for the service # # Default: no classes are specified by default # services.XmlRpcService.handler.$default=java.util.Hashtable # services.XmlRpcService.handler.stringhandler=java.lang.String # The following properties allow the transfer of data between # separate Turbine applications running on different servers. # This allows B2B type behavior such as sending database # updates in the form of XML or whatever type of data # that needs to be shared between Turbine applications # running on separate servers. services.XmlRpcService.handler.file = org.apache.turbine.services.xmlrpc.util.FileHandler services.XmlRpcService.paranoid = false services.XmlRpcService.acceptClient = 192.168.1.* services.XmlRpcService.denyClient = # Do we want a secure server services.XmlRpcService.secure.server = false # Secure server options services.XmlRpcService.secure.server.option.java.protocol.handler.pkgs = \ com.sun.net.ssl.internal.www.protocol services.XmlRpcService.secure.server.option.security.provider = \ com.sun.net.ssl.internal.ssl.Provider services.XmlRpcService.secure.server.option.security.protocol = TLS # You probably want to keep your key stores and trust stores # clear out of your webapp. services.XmlRpcService.secure.server.option.javax.net.ssl.keyStore = /tmp/keystore services.XmlRpcService.secure.server.option.javax.net.ssl.keyStoreType = jks services.XmlRpcService.secure.server.option.javax.net.ssl.keyStorePassword = password services.XmlRpcService.secure.server.option.javax.net.ssl.trustStore = /tmp/truststore services.XmlRpcService.secure.server.option.javax.net.ssl.trustStoreType = jks services.XmlRpcService.secure.server.option.javax.net.ssl.trustStorePassword = password services.XmlRpcService.secure.server.option.sun.ssl.keymanager.type = SunX509 services.XmlRpcService.secure.server.option.sun.ssl.trust.manager.type = SunX509 # These values should be set to 'all' for debugging purposes. services.XmlRpcService.secure.server.option.javax.net.debug = none services.XmlRpcService.secure.server.option.java.security.debug = none # ------------------------------------------------------------------- # # P O O L S E R V I C E # # ------------------------------------------------------------------- # Default capacity of pools of the Object pooling service. # # Default: 128 services.PoolService.pool.capacity = 128 # Class specific capacities used instead of the default if specified. # # services.PoolService.pool.capacity.org.apache.turbine.services.rundata.DefaultTurbineRunData=512 # ------------------------------------------------------------------- # # F A C T O R Y S E R V I C E # # ------------------------------------------------------------------- # A comma separated list of classloaders (very optional) # # Example: org.foo.bar.MyClassLoader, org.ack.joe.YourClassLoader # # services.FactoryService.class.loaders= # Customized factories to be used instead of the default factory. # E.g. to instantiate XML parsers, SSL sockets, etc., which require # specific instantiation not supported by the default factory. # The property name is prefixed with "factory" followed by the # name of the production class. The value is the class name of # the factory implementing the Factory interface. The factory # will be instantiated by using the service itself. # # Examples: # # services.FactoryService.factory.javax.xml.parsers.DocumentBuilder=org.foo.xml.DomBuilderFactory # services.FactoryService.factory.javax.xml.parsers.SAXParser=org.foo.xml.SaxParserFactory # services.FactoryService.factory.java.net.ServerSocket=org.foo.net.SslServerSocketFactory # -------------------------------------------------------------------- # # X S L T S E R V I C E # # -------------------------------------------------------------------- services.XSLTService.path = /path/to/stylesheets services.XSLTService.cache = false # ------------------------------------------------------------------- # # I N T A K E S E R V I C E # # ------------------------------------------------------------------- # The location of the xml file specifying valid inputs # # If you need to define multiple definition files, you can should # seperate them with commas. # # Default: WEB-INF/conf/intake.xml # services.IntakeService.xml.path=WEB-INF/conf/intake.xml # This file is used to cache the XML definitions after they are # parsed. It provides for a small performance gain on startup. # # Note: Even if you have multiple XML definition files, you will # only need one serialization file! # # Default: WEB-INF/appData.ser # services.IntakeService.serialize.path=WEB-INF/appData.ser # -------------------------------------------------------------------- # # P A R A M E T E R P A R S E R # # -------------------------------------------------------------------- # # This variable controls the case folding applied to URL variable # names. # # Allowed values: none, lower, upper # Default: lower # url.case.folding=lower # ------------------------------------------------------------------- # # A V A L O N C O M P O N E N T S E R V I C E # # ------------------------------------------------------------------- # Components implementing the Avalon lifecycle interfaces can be loaded, # configured and initialized by Turbine # ------------------------------------------------------------------- # # Name and location to the configuration file for the components. # services.AvalonComponentService.componentConfiguration = WEB-INF/conf/componentConfiguration.xml # # Name and location to the configuration file for the component roles. # services.AvalonComponentService.componentRoles = WEB-INF/conf/roleConfiguration.xml # # If you want to run Torque from the Avalon Component Service, you must load it # at startup time services.AvalonComponentService.lookup = org.apache.torque.avalon.Torque # ------------------------------------------------------------------- # # S E S S I O N S E R V I C E # # ------------------------------------------------------------------- services.SessionService.earlyInit=true # ------------------------------------------------------------------- # # A D D I T I O N A L P R O P E R T I E S # # ------------------------------------------------------------------- # The full path name to an additional properties file. Properties in # this file will be included in this property set. Duplicate name # values will be replaced, so be careful. # # Default: none # -------------------------------------------------------------------