# vim: noexpandtab tabstop=8 shiftwidth=8 syntax=make
#
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied.  See the License for the
# specific language governing permissions and limitations
# under the License.
#
# WARNING: This may or may not work on your system. This Makefile is
# an example, rather than a ready-made universal solution.

#   ****************************************************************
#   **       IMPORTANT NOTE FOR SVN COMMITTERS:  READ THIS.       **
#   **                                                            **
#   ****************************************************************
#   | This Makefile is used by the bb-openbsd buildbot             |
#   | (http://ci.apache.org/builders/bb-openbsd). Please check     |
#   | the bot's health after making changes to this file.          |
#   |______________________________________________________________|

ENABLE_PERL_BINDINGS ?= yes
THREADING ?= yes
ifeq ($(THREADING),yes)
ENABLE_JAVA_BINDINGS ?= yes
else
ENABLE_JAVA_BINDINGS ?= no
endif
USE_APR_ICONV ?= no # set to yes to use APR iconv instead of GNU iconv
PARALLEL ?= 1
CLEANUP ?= 1
USE_HTTPV1 ?= no
USE_AUTHZ_SHORT_CIRCUIT ?= no
RAMDISK ?= /ramdisk

PWD		= $(shell pwd)
UNAME		= $(shell uname)

TAG		?= none
ifeq ($(TAG),none)
BRANCH		?= trunk
else
BRANCH		= $(TAG)
endif
WC		?= $(BRANCH)
BRANCH_MAJOR	= $(shell echo $(BRANCH) | \
			sed -e 's/\([0-9]\)\.\([0-9]\)\.[x0-9].*$$/\1.\2/')
SVN_REL_WC	= svn-$(WC)
SVN_WC		= $(PWD)/$(SVN_REL_WC)
PREFIX		= $(PWD)/prefix
SVN_PREFIX	= $(PREFIX)/svn-$(WC)
DISTDIR		= $(PWD)/distfiles
SRCDIR		= $(PWD)/src
OBJDIR		= $(PWD)/objdir

BDB_MAJOR_VER	= 4.7
BDB_VER		= $(BDB_MAJOR_VER).25
APR_VER		= 1.4.6
APR_ICONV_VER	= 1.2.1
GNU_ICONV_VER	= 1.14
APR_UTIL_VER	= 1.4.1
HTTPD_VER	= 2.2.22
NEON_VER	= 0.29.6
SERF_VER	= 1.1.0
SERF_OLD_VER	= 0.3.1
CYRUS_SASL_VER	= 2.1.25
SQLITE_VER	= 3071201
LIBMAGIC_VER	= 5.11
RUBY_VER	= 1.8.7-p358
BZ2_VER	= 1.0.6
PYTHON_VER	= 2.7.3
JUNIT_VER	= 4.10

BDB_DIST	= db-$(BDB_VER).tar.gz
APR_ICONV_DIST	= apr-iconv-$(APR_ICONV_VER).tar.gz
GNU_ICONV_DIST	= libiconv-$(GNU_ICONV_VER).tar.gz
NEON_DIST	= neon-$(NEON_VER).tar.gz
SQLITE_DIST	= sqlite-autoconf-$(SQLITE_VER).tar.gz
CYRUS_SASL_DIST	= cyrus-sasl-$(CYRUS_SASL_VER).tar.gz
HTTPD_DIST	= httpd-$(HTTPD_VER).tar.bz2
LIBMAGIC_DIST	= file-$(LIBMAGIC_VER).tar.gz
RUBY_DIST	= ruby-$(RUBY_VER).tar.gz
BZ2_DIST	= bzip2-$(BZ2_VER).tar.gz
PYTHON_DIST	= Python-$(PYTHON_VER).tgz
JUNIT_DIST	= junit-${JUNIT_VER}.jar

DISTFILES	= $(DISTDIR)/$(NEON_DIST) \
		$(DISTDIR)/$(SERF_DIST) \
		$(DISTDIR)/$(SQLITE_DIST) \
		$(DISTDIR)/$(HTTPD_DIST) \
		$(DISTDIR)/$(APR_ICONV_DIST) \
		$(DISTDIR)/$(GNU_ICONV_DIST) \
		$(DISTDIR)/$(CYRUS_SASL_DIST) \
		$(DISTDIR)/$(LIBMAGIC_DIST) \
		$(DISTDIR)/$(RUBY_DIST) \
		$(DISTDIR)/$(BZ2_DIST) \
		$(DISTDIR)/$(PYTHON_DIST) \
		$(DISTDIR)/$(JUNIT_DIST)

FETCH_CMD	= wget -c

SUBVERSION_REPOS_URL = https://svn.apache.org/repos/asf/subversion
BDB_URL		= http://ftp2.de.freebsd.org/pub/FreeBSD/distfiles/bdb/$(BDB_DIST)
APR_URL		= http://svn.apache.org/repos/asf/apr/apr
APR_ICONV_URL	= http://www.apache.org/dist/apr/$(APR_ICONV_DIST)
GNU_ICONV_URL	= http://ftp.gnu.org/pub/gnu/libiconv/$(GNU_ICONV_DIST)
APR_UTIL_URL	= http://svn.apache.org/repos/asf/apr/apr-util
HTTPD_URL	= http://archive.apache.org/dist/httpd/$(HTTPD_DIST)
NEON_URL	= http://webdav.org/neon/$(NEON_DIST)
#SERF_URL	= http://serf.googlecode.com/files/$(SERF_DIST)
SERF_URL	= http://serf.googlecode.com/svn/tags/$(SERF_VER)
SERF_OLD_URL	= http://serf.googlecode.com/svn/tags/$(SERF_OLD_VER)
SQLITE_URL	= http://www.sqlite.org/$(SQLITE_DIST)
CYRUS_SASL_URL	= ftp://ftp.andrew.cmu.edu/pub/cyrus-mail/$(CYRUS_SASL_DIST)
LIBMAGIC_URL	= ftp://ftp.astron.com/pub/file/$(LIBMAGIC_DIST)
RUBY_URL	= http://ftp.ruby-lang.org/pub/ruby/1.8/$(RUBY_DIST)
BZ2_URL		= http://bzip.org/$(BZ2_VER)/$(BZ2_DIST)
PYTHON_URL	= http://python.org/ftp/python/$(PYTHON_VER)/$(PYTHON_DIST)
JUNIT_URL	= http://cloud.github.com/downloads/KentBeck/junit/$(JUNIT_DIST)


BDB_SRCDIR	= $(SRCDIR)/db-$(BDB_VER)
APR_SRCDIR	= $(SRCDIR)/apr-$(APR_VER)
APR_ICONV_SRCDIR	= $(SRCDIR)/apr-iconv-$(APR_ICONV_VER)
GNU_ICONV_SRCDIR	= $(SRCDIR)/libiconv-$(GNU_ICONV_VER)
APR_UTIL_SRCDIR	= $(SRCDIR)/apr-util-$(APR_UTIL_VER)
HTTPD_SRCDIR	= $(SRCDIR)/httpd-$(HTTPD_VER)
NEON_SRCDIR	= $(SRCDIR)/neon-$(NEON_VER)
SERF_SRCDIR	= $(SRCDIR)/serf-$(SERF_VER)
SERF_OLD_SRCDIR	= $(SRCDIR)/serf-$(SERF_OLD_VER)
SQLITE_SRCDIR	= $(SRCDIR)/sqlite-autoconf-$(SQLITE_VER)
CYRUS_SASL_SRCDIR	= $(SRCDIR)/cyrus-sasl-$(CYRUS_SASL_VER)
LIBMAGIC_SRCDIR	= $(SRCDIR)/file-$(LIBMAGIC_VER)
RUBY_SRCDIR	= $(SRCDIR)/ruby-$(RUBY_VER)
BZ2_SRCDIR	= $(SRCDIR)/bzip2-$(BZ2_VER)
PYTHON_SRCDIR	= $(SRCDIR)/Python-$(PYTHON_VER)
SVN_SRCDIR	= $(SVN_WC)

BDB_OBJDIR	= $(OBJDIR)/db-$(BDB_VER)
APR_OBJDIR	= $(OBJDIR)/apr-$(APR_VER)
APR_ICONV_OBJDIR	= $(OBJDIR)/apr-iconv-$(APR_ICONV_VER)
GNU_ICONV_OBJDIR	= $(OBJDIR)/libiconv-$(GNU_ICONV_VER)
APR_UTIL_OBJDIR	= $(OBJDIR)/apr-util-$(APR_UTIL_VER)
HTTPD_OBJDIR	= $(OBJDIR)/httpd-$(HTTPD_VER)
NEON_OBJDIR	= $(OBJDIR)/neon-$(NEON_VER)
SERF_OBJDIR	= $(OBJDIR)/serf-$(SERF_VER)
SERF_OLD_OBJDIR	= $(OBJDIR)/serf-$(SERF_OLD_VER)
SQLITE_OBJDIR	= $(OBJDIR)/sqlite-$(SQLITE_VER)
CYRUS_SASL_OBJDIR	= $(OBJDIR)/cyrus-sasl-$(CYRUS_SASL_VER)
LIBMAGIC_OBJDIR	= $(OBJDIR)/file-$(LIBMAGIC_VER)
RUBY_OBJDIR	= $(OBJDIR)/ruby-$(RUBY_VER)
BZ2_OBJDIR	= $(OBJDIR)/bzip2-$(BZ2_VER)
PYTHON_OBJDIR	= $(OBJDIR)/python-$(PYTHON_VER)
SVN_OBJDIR	= $(OBJDIR)/$(SVN_REL_WC)

# Tweak this for out-of-tree builds. Note that running individual
# tests in the test suite won't work conveniently with out-of-tree
# builds!
svn_builddir	?=$(SVN_WC)

ifdef PROFILE
PROFILE_CFLAGS=-pg
endif

# We need this to make sure some targets below pick up the right libraries
LD_LIBRARY_PATH=$(PREFIX)/apr/lib:$(PREFIX)/iconv/lib:$(PREFIX)/bdb/lib:$(PREFIX)/neon/lib:$(PREFIX)/serf/lib:$(PREFIX)/sqlite/lib:$(PREFIX)/cyrus-sasl/lib:$(PREFIX)/iconv/lib:$(PREFIX)/libmagic/lib:$(PREFIX)/ruby/lib:$(PREFIX)/python/lib:$(PREFIX)/svn-$(WC)/lib

#######################################################################
# Main targets.
#######################################################################

.PHONY: all reset clean nuke

all: dirs-create bdb-install apr-install iconv-install apr-util-install \
	httpd-install neon-install serf-install serf-old-install \
	sqlite-install cyrus-sasl-install libmagic-install \
	ruby-install bz2-install python-install \
	svn-install svn-bindings-install

# Use these to start a build from the beginning.
reset: dirs-reset bdb-reset apr-reset iconv-reset apr-util-reset \
	httpd-reset neon-reset serf-reset serf-old-reset sqlite-reset \
	cyrus-sasl-reset libmagic-reset ruby-reset python-reset \
	bz2-reset svn-reset

# Use to save disk space.
clean: bdb-clean apr-clean iconv-clean apr-util-clean httpd-clean \
	neon-clean serf-clean serf-old-clean sqlite-clean cyrus-sasl-clean \
	libmagic-clean ruby-clean bz2-clean python-clean svn-clean

# Nukes everything (including installed binaries!)
# Use this to start ALL OVER AGAIN! Use with caution!
nuke:
	@echo
	@echo "I will now remove the following directories PERMANENTLY:"
	@echo
	@echo "  $(SRCDIR)"
	@echo "  $(OBJDIR)"
	@echo "  $(PREFIX)"
	@echo
	@echo -n 'Do you want me to continue? ([no]/yes): '
	@read ANSWER ; \
		case $$ANSWER in \
			yes)    echo "You said $$ANSWER. I will continue."; \
				echo rm -rf $(SRCDIR) $(OBJDIR) $(PREFIX); \
				rm -rf $(SRCDIR) $(OBJDIR) $(PREFIX); \
				$(MAKE) reset; \
				;; \
			"")     echo "You said no."; \
				;; \
			*)      echo "You said $$ANSWER."; \
				;; \
		esac

#######################################################################
# directories
#######################################################################

dirs-create: $(PWD)/.dirs-created
dirs-reset:
	rm -f $(PWD)/.dirs-created

$(PWD)/.dirs-created: 
	$(foreach d, $(PREFIX) $(DISTDIR) $(SRCDIR) $(OBJDIR), \
		[ -d $(d) ] || mkdir -p $(d);)
		touch $@

#######################################################################
# bdb
#######################################################################

bdb-retrieve:	$(BDB_OBJDIR)/.retrieved
bdb-configure:	$(BDB_OBJDIR)/.configured
bdb-compile:	$(BDB_OBJDIR)/.compiled
bdb-install:	$(BDB_OBJDIR)/.installed
bdb-reset:
	$(foreach f, .retrieved .configured .compiled .installed, \
		rm -f $(BDB_OBJDIR)/$(f);)

bdb-clean:
	-(cd $(BDB_SRCDIR)/build_unix/ && make clean)

# fetch distfile for bdb
$(DISTDIR)/$(BDB_DIST):
	cd $(DISTDIR) && $(FETCH_CMD) $(BDB_URL)

# retrieve bdb
$(BDB_OBJDIR)/.retrieved: $(DISTDIR)/$(BDB_DIST)
	[ -d $(BDB_OBJDIR) ] || mkdir -p $(BDB_OBJDIR)
	tar -C $(SRCDIR) -zxf $(DISTDIR)/$(BDB_DIST)
	touch $@

# configure bdb
$(BDB_OBJDIR)/.configured: $(BDB_OBJDIR)/.retrieved
	cd $(BDB_SRCDIR)/build_unix \
		&& env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`" \
		../dist/configure \
		--prefix=$(PREFIX)/bdb \
		--enable-debug
	touch $@

# compile bdb
$(BDB_OBJDIR)/.compiled: $(BDB_OBJDIR)/.configured
	(cd $(BDB_SRCDIR)/build_unix && make)
	touch $@

# install bdb
$(BDB_OBJDIR)/.installed: $(BDB_OBJDIR)/.compiled
	(cd $(BDB_SRCDIR)/build_unix && make install)
	touch $@

#######################################################################
# apr
#######################################################################

apr-retrieve:	$(APR_OBJDIR)/.retrieved
apr-configure:	$(APR_OBJDIR)/.configured
apr-compile:	$(APR_OBJDIR)/.compiled
apr-install:	$(APR_OBJDIR)/.installed
apr-reset:
	$(foreach f, .retrieved .configured .compiled .installed, \
		rm -f $(APR_OBJDIR)/$(f);)

apr-clean:
	-(cd $(APR_OBJDIR) && make clean)

# retrieve apr if not present yet
$(APR_OBJDIR)/.retrieved:
	[ -d $(APR_OBJDIR) ] || mkdir -p $(APR_OBJDIR)
	if [ ! -d $(APR_SRCDIR) ]; then \
		svn export $(APR_URL)/tags/$(APR_VER)/ $(APR_SRCDIR); \
	fi
	touch $@

ifeq ($(THREADING),yes)
THREADS_FLAG=--enable-threads
else
THREADS_FLAG=--disable-threads
endif

ifdef POOL_DEBUG
POOL_DEBUG_FLAG=--enable-pool-debug=all
endif

# configure apr
$(APR_OBJDIR)/.configured: $(APR_OBJDIR)/.retrieved
	cd $(APR_SRCDIR) && ./buildconf
	cd $(APR_OBJDIR) \
		&& env CFLAGS="-O0 -g $(PROFILE_CFLAGS)" GREP="`which grep`" \
		$(APR_SRCDIR)/configure \
		--prefix=$(PREFIX)/apr \
		--enable-maintainer-mode \
		$(THREADS_FLAG) \
		$(POOL_DEBUG_FLAG)
	touch $@

# compile apr
$(APR_OBJDIR)/.compiled: $(APR_OBJDIR)/.configured
	(cd $(APR_OBJDIR) && make)
	touch $@

# install apr
$(APR_OBJDIR)/.installed: $(APR_OBJDIR)/.compiled
	(cd $(APR_OBJDIR) && make install)
	touch $@

#######################################################################
# apr-iconv
#######################################################################

apr-iconv-retrieve:	$(APR_ICONV_OBJDIR)/.retrieved
apr-iconv-configure:	$(APR_ICONV_OBJDIR)/.configured
apr-iconv-compile:	$(APR_ICONV_OBJDIR)/.compiled
apr-iconv-install:	$(APR_ICONV_OBJDIR)/.installed
apr-iconv-reset:
	$(foreach f, .retrieved .configured .compiled .installed, \
		rm -f $(APR_ICONV_OBJDIR)/$(f);)

apr-iconv-clean:
	-(cd $(APR_ICONV_OBJDIR) && make clean)

# fetch distfile for apr-iconv
$(DISTDIR)/$(APR_ICONV_DIST):
	cd $(DISTDIR) && $(FETCH_CMD) $(APR_ICONV_URL)

# retrieve apr-iconv
$(APR_ICONV_OBJDIR)/.retrieved: $(DISTDIR)/$(APR_ICONV_DIST)
	[ -d $(APR_ICONV_OBJDIR) ] || mkdir -p $(APR_ICONV_OBJDIR)
	tar -C $(SRCDIR) -zxf $(DISTDIR)/$(APR_ICONV_DIST)
	touch $@

# configure apr-iconv
$(APR_ICONV_OBJDIR)/.configured: $(APR_ICONV_OBJDIR)/.retrieved
	cd $(APR_ICONV_OBJDIR) \
		&& env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`" \
		$(APR_ICONV_SRCDIR)/configure \
		--prefix=$(PREFIX)/apr \
		--with-apr=$(PREFIX)/apr
	touch $@

# compile apr-iconv
$(APR_ICONV_OBJDIR)/.compiled: $(APR_ICONV_OBJDIR)/.configured
	(cd $(APR_ICONV_OBJDIR) \
		&& make CPPFLAGS="-D_OSD_POSIX" CFLAGS="-g -O0 $(PROFILE_CFLAGS)")
	touch $@

# install apr-iconv
$(APR_ICONV_OBJDIR)/.installed: $(APR_ICONV_OBJDIR)/.compiled
	(cd $(APR_ICONV_OBJDIR) && make install)
	touch $@

#######################################################################
# gnu-iconv
#######################################################################

gnu-iconv-retrieve:	$(GNU_ICONV_OBJDIR)/.retrieved
gnu-iconv-configure:	$(GNU_ICONV_OBJDIR)/.configured
gnu-iconv-compile:	$(GNU_ICONV_OBJDIR)/.compiled
gnu-iconv-install:	$(GNU_ICONV_OBJDIR)/.installed
gnu-iconv-reset:
	$(foreach f, .retrieved .configured .compiled .installed, \
		rm -f $(GNU_ICONV_OBJDIR)/$(f);)

gnu-iconv-clean:
	-(cd $(GNU_ICONV_OBJDIR) && make clean)
	rm -f $(GNU_ICONV_OBJDIR)/lib_encodings.def.diff
	rm -f $(GNU_ICONV_OBJDIR)/lib_aliases.gperf.diff

# fetch distfile for gnu-iconv
$(DISTDIR)/$(GNU_ICONV_DIST):
	cd $(DISTDIR) && $(FETCH_CMD) $(GNU_ICONV_URL)

$(GNU_ICONV_OBJDIR)/lib_encodings.def.diff:
	mkdir -p $(dir $@)
	echo > $@.tmp '--- lib/encodings.def.orig	Wed Oct 24 23:41:41 2007'
	echo >>$@.tmp '+++ lib/encodings.def	Wed Oct 24 23:43:47 2007'
	echo >>$@.tmp '@@ -37,6 +37,7 @@'
	echo >>$@.tmp ' '
	echo >>$@.tmp ' '
	echo >>$@.tmp ' DEFENCODING(( "US-ASCII",               /* IANA */'
	echo >>$@.tmp '+              "646",'
	echo >>$@.tmp '               "ASCII",                  /* IANA, JDK 1.1 */'
	echo >>$@.tmp '               "ISO646-US",              /* IANA */'
	echo >>$@.tmp '               "ISO_646.IRV:1991",       /* IANA */'
	mv -f $@.tmp $@

$(GNU_ICONV_OBJDIR)/lib_aliases.gperf.diff:
	mkdir -p $(dir $@)
	echo > $@.tmp '--- lib/aliases.gperf.orig	Wed Oct 24 23:41:32 2007'
	echo >>$@.tmp '+++ lib/aliases.gperf	Wed Oct 24 23:47:38 2007'
	echo >>$@.tmp '@@ -10,6 +10,7 @@ struct alias { int name; unsigned int encoding_index; '
	echo >>$@.tmp ' %pic'
	echo >>$@.tmp ' %%'
	echo >>$@.tmp ' US-ASCII, ei_ascii'
	echo >>$@.tmp '+646, ei_ascii'
	echo >>$@.tmp ' ASCII, ei_ascii'
	echo >>$@.tmp ' ISO646-US, ei_ascii'
	echo >>$@.tmp ' ISO_646.IRV:1991, ei_ascii'
	mv -f $@.tmp $@

# retrieve gnu-iconv
# Add 646 as an alias for ASCII to fix prop_test 22 on OpenBSD
$(GNU_ICONV_OBJDIR)/.retrieved: $(DISTDIR)/$(GNU_ICONV_DIST) \
		$(GNU_ICONV_OBJDIR)/lib_encodings.def.diff \
		$(GNU_ICONV_OBJDIR)/lib_aliases.gperf.diff
	tar -C $(SRCDIR) -zxf $(DISTDIR)/$(GNU_ICONV_DIST)
	cd $(SRCDIR)/libiconv-$(GNU_ICONV_VER) && \
		patch -p0 < $(GNU_ICONV_OBJDIR)/lib_encodings.def.diff && \
		patch -p0 < $(GNU_ICONV_OBJDIR)/lib_aliases.gperf.diff
	touch $@

# configure gnu-iconv
$(GNU_ICONV_OBJDIR)/.configured: $(GNU_ICONV_OBJDIR)/.retrieved
	cd $(SRCDIR)/libiconv-${GNU_ICONV_VER} && \
		${MAKE} -f Makefile.devel lib/aliases.h
	cd $(GNU_ICONV_OBJDIR) \
		&& env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`"\
		$(GNU_ICONV_SRCDIR)/configure \
		--prefix=$(PREFIX)/iconv \
		--enable-extra-encodings
	touch $@

# compile gnu-iconv
$(GNU_ICONV_OBJDIR)/.compiled: $(GNU_ICONV_OBJDIR)/.configured
	(cd $(GNU_ICONV_OBJDIR) && make)
	touch $@

# install gnu-iconv
$(GNU_ICONV_OBJDIR)/.installed: $(GNU_ICONV_OBJDIR)/.compiled
	(cd $(GNU_ICONV_OBJDIR) && make install)
	touch $@

#######################################################################
# iconv
#######################################################################

.PHONY: iconv-install iconv-reset iconv-clean

ifeq ($(USE_APR_ICONV),yes)
iconv-install: apr-iconv-install
iconv-reset: apr-iconv-reset
iconv-clean: apr-iconv-clean
else
iconv-install: gnu-iconv-install
iconv-reset: gnu-iconv-reset
iconv-clean: gnu-iconv-clean
endif

#######################################################################
# apr-util
#######################################################################

apr-util-retrieve:	$(APR_UTIL_OBJDIR)/.retrieved
apr-util-configure:	$(APR_UTIL_OBJDIR)/.configured
apr-util-compile:	$(APR_UTIL_OBJDIR)/.compiled
apr-util-install:	$(APR_UTIL_OBJDIR)/.installed
apr-util-reset:
	$(foreach f, .retrieved .configured .compiled .installed, \
		rm -f $(APR_UTIL_OBJDIR)/$(f);)

apr-util-clean:
	-(cd $(APR_UTIL_OBJDIR) && make clean)


# retrieve apr-util if not present yet
$(APR_UTIL_OBJDIR)/.retrieved:
	[ -d $(APR_UTIL_OBJDIR) ] || mkdir -p $(APR_UTIL_OBJDIR)
	if [ ! -d $(APR_UTIL_SRCDIR) ]; then \
		svn export $(APR_UTIL_URL)/tags/$(APR_UTIL_VER)/ \
			$(APR_UTIL_SRCDIR); \
	fi
	touch $@

ifeq ($(USE_APR_ICONV),yes)
ICONV_FLAG=--with-iconv=$(PREFIX)/apr
else
ICONV_FLAG=--with-iconv=$(PREFIX)/iconv
endif

# configure apr-util
$(APR_UTIL_OBJDIR)/.configured: $(APR_UTIL_OBJDIR)/.retrieved
	cd $(APR_UTIL_SRCDIR) && ./buildconf --with-apr=$(APR_SRCDIR)
	cd $(APR_UTIL_OBJDIR) \
		&& env LD_LIBRARY_PATH=$(PREFIX)/bdb/lib \
			CFLAGS="-O0 -g $(PROFILE_CFLAGS)" \
			GREP="`which grep`" \
			$(APR_UTIL_SRCDIR)/configure \
		--prefix=$(PREFIX)/apr \
		--enable-maintainer-mode \
		--with-apr=$(PREFIX)/apr \
		--with-berkeley-db=$(PREFIX)/bdb \
		$(ICONV_FLAG)
	touch $@

# compile apr-util
$(APR_UTIL_OBJDIR)/.compiled: $(APR_UTIL_OBJDIR)/.configured
	(cd $(APR_UTIL_OBJDIR) && make)
	touch $@

# install apr-util
$(APR_UTIL_OBJDIR)/.installed: $(APR_UTIL_OBJDIR)/.compiled
	(cd $(APR_UTIL_OBJDIR) && make install)
	touch $@

#######################################################################
# httpd
#######################################################################

HTTPD_CONF=	$(PREFIX)/httpd/conf/httpd-$(SVN_REL_WC).conf
httpd-retrieve:	$(HTTPD_OBJDIR)/.retrieved
httpd-configure:	$(HTTPD_OBJDIR)/.configured
httpd-compile:	$(HTTPD_OBJDIR)/.compiled
httpd-install:	$(HTTPD_OBJDIR)/.installed $(HTTPD_CONF)
httpd-reset:
	$(foreach f, .retrieved .configured .compiled .installed, \
		rm -f $(HTTPD_OBJDIR)/$(f);)

httpd-clean:
	-(cd $(HTTPD_OBJDIR) && make clean)

# fetch distfile for httpd
$(DISTDIR)/$(HTTPD_DIST):
	cd $(DISTDIR) && $(FETCH_CMD) $(HTTPD_URL)

# retrieve httpd
$(HTTPD_OBJDIR)/.retrieved: $(DISTDIR)/$(HTTPD_DIST)
	[ -d $(HTTPD_OBJDIR) ] || mkdir -p $(HTTPD_OBJDIR)
	tar -C $(SRCDIR) -jxf $(DISTDIR)/$(HTTPD_DIST)
	touch $@

# configure httpd
$(HTTPD_OBJDIR)/.configured: $(HTTPD_OBJDIR)/.retrieved
	cd $(HTTPD_OBJDIR) \
		&& env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`" \
		$(HTTPD_SRCDIR)/configure \
		--prefix=$(PREFIX)/httpd \
		--enable-maintainer-mode \
		--enable-ssl \
		--enable-dav \
		--with-mpm=prefork \
		--with-apr="$(PREFIX)/apr" \
		--with-apr-util="$(PREFIX)/apr"
	touch $@

# compile httpd
$(HTTPD_OBJDIR)/.compiled: $(HTTPD_OBJDIR)/.configured
	(cd $(HTTPD_OBJDIR) && make)
	touch $@

# install httpd
$(HTTPD_OBJDIR)/.installed: $(HTTPD_OBJDIR)/.compiled
	(cd $(HTTPD_OBJDIR) && make install)
	touch $@

# create a httpd.conf for mod_dav_svn
$(HTTPD_CONF):
	mkdir -p $(dir $@)
	echo > $@.tmp '# httpd config for use with mod_dav_svn'
	echo >>$@.tmp 'ServerRoot "$(PREFIX)/httpd"'
	echo >>$@.tmp 'Listen localhost:8080'
	echo >>$@.tmp 'LoadModule dav_svn_module modules/svn-$(WC)/mod_dav_svn.so'
	echo >>$@.tmp 'LoadModule authz_svn_module modules/svn-$(WC)/mod_authz_svn.so'
	echo >>$@.tmp 'DocumentRoot "$(PREFIX)/httpd/htdocs"'
	echo >>$@.tmp '<Directory />'
	echo >>$@.tmp '    Options FollowSymLinks'
	echo >>$@.tmp '    AllowOverride None'
	echo >>$@.tmp '    Order deny,allow'
	echo >>$@.tmp '    Deny from all'
	echo >>$@.tmp '</Directory>'
	echo >>$@.tmp '<Location /repos>'
	echo >>$@.tmp '    DAV svn'
	echo >>$@.tmp '    SVNPath /tmp/svn-sandbox/repos'
	echo >>$@.tmp '    Allow from localhost'
	echo >>$@.tmp '</Location>'
	mv -f $@.tmp $@

#######################################################################
# neon
#######################################################################

neon-retrieve:	$(NEON_OBJDIR)/.retrieved
neon-configure:	$(NEON_OBJDIR)/.configured
neon-compile:	$(NEON_OBJDIR)/.compiled
neon-install:	$(NEON_OBJDIR)/.installed
neon-reset:
	$(foreach f, .retrieved .configured .compiled .installed, \
		rm -f $(NEON_OBJDIR)/$(f);)

neon-clean:
	-(cd $(NEON_OBJDIR) && make clean)

# fetch distfile for neon
$(DISTDIR)/$(NEON_DIST):
	cd $(DISTDIR) && $(FETCH_CMD) $(NEON_URL)

# retrieve neon
NEON_SVN_URL=http://svn.webdav.org/repos/projects/neon/trunk
$(NEON_OBJDIR)/.retrieved: $(DISTDIR)/$(NEON_DIST)
	[ -d $(NEON_OBJDIR) ] || mkdir -p $(NEON_OBJDIR)
	tar -C $(SRCDIR) -zxf $(DISTDIR)/$(NEON_DIST)
	# fix build with OpenSSL lacking SSLv2 support:
	cd $(NEON_SRCDIR)/src && svn diff -c 1865 \
		$(NEON_SVN_URL)/src/ne_openssl.c | patch -p0
	cd $(NEON_SRCDIR)/src && svn diff -c 1872 \
		$(NEON_SVN_URL)/src/ne_openssl.c | patch -p0
	cd $(NEON_SRCDIR)/src && svn diff -c 1865 \
		$(NEON_SVN_URL)/src/ne_ssl.h | patch -p0
	cd $(NEON_SRCDIR)/src && svn diff -c 1865 \
		$(NEON_SVN_URL)/src/ne_session.c | patch -p0
	touch $@

# OpenBSD does not have krb5-config in PATH, but the neon port has
# a suitable replacement.
ifeq ($(UNAME),OpenBSD)
KRB5_CONFIG_PATH=/usr/ports/net/neon/files
endif

# configure neon
$(NEON_OBJDIR)/.configured: $(NEON_OBJDIR)/.retrieved
	cd $(NEON_SRCDIR) && ./autogen.sh
	if [ -n "$(KRB5_CONFIG_PATH)" ] && [ -d "$(KRB5_CONFIG_PATH)" ]; then \
		cp $(KRB5_CONFIG_PATH)/krb5-config $(NEON_OBJDIR); \
		chmod +x $(NEON_OBJDIR)/krb5-config; \
	fi
	cd $(NEON_OBJDIR) \
		&& env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`" \
		$(NEON_SRCDIR)/configure \
		PATH=$(NEON_OBJDIR):$$PATH \
		--prefix=$(PREFIX)/neon \
		--with-ssl \
		--enable-shared \
		--without-libproxy
	touch $@

# compile neon
$(NEON_OBJDIR)/.compiled: $(NEON_OBJDIR)/.configured
	(cd $(NEON_OBJDIR) && make)
	touch $@

# install neon
$(NEON_OBJDIR)/.installed: $(NEON_OBJDIR)/.compiled
	(cd $(NEON_OBJDIR) && make install)
	touch $@


#######################################################################
# serf
#######################################################################

serf-retrieve:	$(SERF_OBJDIR)/.retrieved
serf-configure:	$(SERF_OBJDIR)/.configured
serf-compile:	$(SERF_OBJDIR)/.compiled
serf-install:	$(SERF_OBJDIR)/.installed
serf-reset:
	$(foreach f, .retrieved .configured .compiled .installed, \
		rm -f $(SERF_OBJDIR)/$(f);)

serf-clean:
	-(cd $(SERF_SRCDIR) && ./serfmake clean)


# fetch distfile for serf
#$(DISTDIR)/$(SERF_DIST):
#	cd $(DISTDIR) && $(FETCH_CMD) $(SERF_URL)
#
# retrieve serf
#$(SERF_OBJDIR)/.retrieved: $(DISTDIR)/$(SERF_DIST)
#	[ -d $(SERF_OBJDIR) ] || mkdir -p $(SERF_OBJDIR)
#	tar -C $(SRCDIR) -zxf $(DISTDIR)/$(SERF_DIST)
#	cd $(SRCDIR)/serf-$(SERF_VER) && \
#		svn diff -c1394 http://serf.googlecode.com/svn | patch -p2
#	touch $@

# retrieve serf if not present yet
$(SERF_OBJDIR)/.retrieved:
	[ -d $(SERF_OBJDIR) ] || mkdir -p $(SERF_OBJDIR)
	if [ ! -d $(SERF_SRCDIR) ]; then \
		svn export $(SERF_URL) $(SERF_SRCDIR); \
	fi
	touch $@

# compile serf (serf won't compile outside its source tree)
$(SERF_OBJDIR)/.compiled: $(SERF_OBJDIR)/.retrieved
	cd $(SERF_SRCDIR) && \
		env CFLAGS="-O0 -g $(PROFILE_CFLAGS)" \
			./serfmake --with-apr=$(PREFIX)/apr \
			--prefix=$(PREFIX)/serf \
			build
	touch $@

# install serf
$(SERF_OBJDIR)/.installed: $(SERF_OBJDIR)/.compiled
	cd $(SERF_SRCDIR) && \
		./serfmake --with-apr=$(PREFIX)/apr \
			--with-apr-util=$(PREFIX)/apr \
			--prefix=$(PREFIX)/serf \
			install
	touch $@

#######################################################################
# serf-old (compatible with Subversion 1.5)
#######################################################################

serf-old-retrieve:	$(SERF_OLD_OBJDIR)/.retrieved
serf-old-configure:	$(SERF_OLD_OBJDIR)/.configured
serf-old-compile:	$(SERF_OLD_OBJDIR)/.compiled
serf-old-install:	$(SERF_OLD_OBJDIR)/.installed
serf-old-reset:
	$(foreach f, .retrieved .configured .compiled .installed, \
		rm -f $(SERF_OLD_OBJDIR)/$(f);)

serf-old-clean:
	-(cd $(SERF_OLD_SRCDIR) && ./serfmake clean)

# retrieve serf if not present yet
$(SERF_OLD_OBJDIR)/.retrieved:
	[ -d $(SERF_OLD_OBJDIR) ] || mkdir -p $(SERF_OLD_OBJDIR)
	if [ ! -d $(SERF_OLD_SRCDIR) ]; then \
		svn export $(SERF_OLD_URL) $(SERF_OLD_SRCDIR); \
	fi
	touch $@

# compile serf (serf won't compile outside its source tree)
$(SERF_OLD_OBJDIR)/.compiled: $(SERF_OLD_OBJDIR)/.retrieved
	cd $(SERF_OLD_SRCDIR) && \
		env CFLAGS="-O0 -g $(PROFILE_CFLAGS)" \
			./serfmake --with-apr=$(PREFIX)/apr \
			--prefix=$(PREFIX)/serf-old \
			build
	touch $@

# install serf
$(SERF_OLD_OBJDIR)/.installed: $(SERF_OLD_OBJDIR)/.compiled
	cd $(SERF_OLD_SRCDIR) && \
		./serfmake --with-apr=$(PREFIX)/apr \
			--with-apr-util=$(PREFIX)/apr \
			--prefix=$(PREFIX)/serf-old \
			install
	touch $@


#######################################################################
# sqlite
#######################################################################

sqlite-retrieve:	$(SQLITE_OBJDIR)/.retrieved
sqlite-configure:	$(SQLITE_OBJDIR)/.configured
sqlite-compile:	$(SQLITE_OBJDIR)/.compiled
sqlite-install:	$(SQLITE_OBJDIR)/.installed
sqlite-reset:
	$(foreach f, .retrieved .configured .compiled .installed, \
		rm -f $(SQLITE_OBJDIR)/$(f);)

sqlite-clean:
	-cd $(SQLITE_OBJDIR) && make clean

# fetch distfile for sqlite
$(DISTDIR)/$(SQLITE_DIST):
	cd $(DISTDIR) && $(FETCH_CMD) $(SQLITE_URL)

# retrieve sqlite
$(SQLITE_OBJDIR)/.retrieved: $(DISTDIR)/$(SQLITE_DIST)
	[ -d $(SQLITE_OBJDIR) ] || mkdir -p $(SQLITE_OBJDIR)
	tar -C $(SRCDIR) -zxf $(DISTDIR)/$(SQLITE_DIST)
	touch $@

ifeq ($(THREADING),yes)
THREADSAFE_FLAG=--enable-threadsafe
else
THREADSAFE_FLAG=--disable-threadsafe
endif

# configure sqlite
$(SQLITE_OBJDIR)/.configured: $(SQLITE_OBJDIR)/.retrieved
	cd $(SQLITE_OBJDIR) \
		&& env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`" \
		$(SQLITE_SRCDIR)/configure \
		--prefix=$(PREFIX)/sqlite \
		$(THREADSAFE_FLAG)
	touch $@

# compile sqlite
$(SQLITE_OBJDIR)/.compiled: $(SQLITE_OBJDIR)/.configured
	(cd $(SQLITE_OBJDIR) && make)
	touch $@

# install sqlite
$(SQLITE_OBJDIR)/.installed: $(SQLITE_OBJDIR)/.compiled
	(cd $(SQLITE_OBJDIR) && make install)
	touch $@

#######################################################################
# cyrus-sasl
#######################################################################

cyrus-sasl-retrieve:	$(CYRUS_SASL_OBJDIR)/.retrieved
cyrus-sasl-configure:	$(CYRUS_SASL_OBJDIR)/.configured
cyrus-sasl-compile:	$(CYRUS_SASL_OBJDIR)/.compiled
cyrus-sasl-install:	$(CYRUS_SASL_OBJDIR)/.installed
cyrus-sasl-reset:
	$(foreach f, .retrieved .configured .compiled .installed, \
		rm -f $(CYRUS_SASL_OBJDIR)/$(f);)

cyrus-sasl-clean:
	-(cd $(CYRUS_SASL_OBJDIR) && make distclean)

# fetch distfile for cyrus-sasl
$(DISTDIR)/$(CYRUS_SASL_DIST):
	cd $(DISTDIR) && $(FETCH_CMD) $(CYRUS_SASL_URL)

# retrieve cyrus-sasl
$(CYRUS_SASL_OBJDIR)/.retrieved: $(DISTDIR)/$(CYRUS_SASL_DIST)
	[ -d $(CYRUS_SASL_OBJDIR) ] || mkdir -p $(CYRUS_SASL_OBJDIR)
	tar -C $(SRCDIR) -zxf $(DISTDIR)/$(CYRUS_SASL_DIST)
	# fixes build on Debian:
	sed 's/#elif WITH_DES/#elif defined(WITH_DES)/' \
		< $(CYRUS_SASL_SRCDIR)/plugins/digestmd5.c \
		> $(CYRUS_SASL_SRCDIR)/plugins/digestmd5.c.patched
	mv $(CYRUS_SASL_SRCDIR)/plugins/digestmd5.c.patched \
		$(CYRUS_SASL_SRCDIR)/plugins/digestmd5.c
ifeq ($(UNAME),OpenBSD)
	# Fixes GSSAPI support on OpenBSD, which hasn't got libroken:
	for f in `grep -l -R -- -lroken $(CYRUS_SASL_SRCDIR)`; do \
		sed -e 's/-lroken//g' < $$f > $$f.tmp && \
		mv $$f.tmp $$f; \
	done
	chmod +x $(CYRUS_SASL_SRCDIR)/configure
endif
	# Fixes excessive auth log spam from sasl if broken .la files exist
	sed 's/SASL_LOG_WARN/SASL_LOG_DEBUG/' \
		< $(CYRUS_SASL_SRCDIR)/lib/dlopen.c \
		> $(CYRUS_SASL_SRCDIR)/lib/dlopen.c.patched
	mv $(CYRUS_SASL_SRCDIR)/lib/dlopen.c.patched \
		$(CYRUS_SASL_SRCDIR)/lib/dlopen.c
	touch $@

# configure cyrus-sasl
$(CYRUS_SASL_OBJDIR)/.configured: $(CYRUS_SASL_OBJDIR)/.retrieved
	cd $(CYRUS_SASL_OBJDIR) \
		&& env CFLAGS="-g $(PROFILE_CFLAGS)" \
		CPPFLAGS="-I/usr/include/kerberosV" \
		GREP="`which grep`" \
		$(CYRUS_SASL_SRCDIR)/configure \
		--with-dbpath=$(PREFIX)/cyrus-sasl/etc/sasldb2 \
		--with-plugindir=$(PREFIX)/cyrus-sasl/lib/sasl2 \
		--with-configdir=$(PREFIX)/cyrus-sasl/lib/sasl2 \
		--with-bdb-libdir=$(PREFIX)/bdb/lib \
		--with-bdb-incdir=$(PREFIX)/bdb/include \
		--with-dblib=berkeley \
		--with-sqlite=$(PREFIX)/sqlite \
		--prefix=$(PREFIX)/cyrus-sasl
	touch $@

# compile cyrus-sasl
$(CYRUS_SASL_OBJDIR)/.compiled: $(CYRUS_SASL_OBJDIR)/.configured
	(cd $(CYRUS_SASL_OBJDIR) && make)
	touch $@

# install cyrus-sasl
$(CYRUS_SASL_OBJDIR)/.installed: $(CYRUS_SASL_OBJDIR)/.compiled
	(cd $(CYRUS_SASL_OBJDIR) && make install)
	touch $@

#######################################################################
# libmagic
#######################################################################

libmagic-retrieve:	$(LIBMAGIC_OBJDIR)/.retrieved
libmagic-configure:	$(LIBMAGIC_OBJDIR)/.configured
libmagic-compile:	$(LIBMAGIC_OBJDIR)/.compiled
libmagic-install:	$(LIBMAGIC_OBJDIR)/.installed
libmagic-reset:
	$(foreach f, .retrieved .configured .compiled .installed, \
		rm -f $(LIBMAGIC_OBJDIR)/$(f);)

libmagic-clean:
	-(cd $(LIBMAGIC_OBJDIR) && make distclean)

# fetch distfile for libmagic
$(DISTDIR)/$(LIBMAGIC_DIST):
	cd $(DISTDIR) && $(FETCH_CMD) $(LIBMAGIC_URL)

# retrieve libmagic
$(LIBMAGIC_OBJDIR)/.retrieved: $(DISTDIR)/$(LIBMAGIC_DIST)
	[ -d $(LIBMAGIC_OBJDIR) ] || mkdir -p $(LIBMAGIC_OBJDIR)
	tar -C $(SRCDIR) -zxf $(DISTDIR)/$(LIBMAGIC_DIST)
	touch $@

# configure libmagic
$(LIBMAGIC_OBJDIR)/.configured: $(LIBMAGIC_OBJDIR)/.retrieved
	cd $(LIBMAGIC_OBJDIR) \
		&& env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`"\
		$(LIBMAGIC_SRCDIR)/configure \
		--enable-fsect-man5 \
		--prefix=$(PREFIX)/libmagic
	touch $@

# compile libmagic
$(LIBMAGIC_OBJDIR)/.compiled: $(LIBMAGIC_OBJDIR)/.configured
	(cd $(LIBMAGIC_OBJDIR) && make)
	touch $@

# install libmagic
$(LIBMAGIC_OBJDIR)/.installed: $(LIBMAGIC_OBJDIR)/.compiled
	(cd $(LIBMAGIC_OBJDIR) && make install)
	touch $@

#######################################################################
# ruby
#######################################################################

ruby-retrieve:	$(RUBY_OBJDIR)/.retrieved
ruby-configure:	$(RUBY_OBJDIR)/.configured
ruby-compile:	$(RUBY_OBJDIR)/.compiled
ruby-install:	$(RUBY_OBJDIR)/.installed
ruby-reset:
	$(foreach f, .retrieved .configured .compiled .installed, \
		rm -f $(RUBY_OBJDIR)/$(f);)

ruby-clean:
	-(cd $(RUBY_OBJDIR) && make distclean)

# fetch distfile for ruby
$(DISTDIR)/$(RUBY_DIST):
	cd $(DISTDIR) && $(FETCH_CMD) $(RUBY_URL)

# retrieve ruby
#
$(RUBY_OBJDIR)/.retrieved: $(DISTDIR)/$(RUBY_DIST)
	[ -d $(RUBY_OBJDIR) ] || mkdir -p $(RUBY_OBJDIR)
	tar -C $(SRCDIR) -zxf $(DISTDIR)/$(RUBY_DIST)
	touch $@

# configure ruby
$(RUBY_OBJDIR)/.configured: $(RUBY_OBJDIR)/.retrieved
	cd $(RUBY_OBJDIR) \
		&& env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`"\
		$(RUBY_SRCDIR)/configure \
		--prefix=$(PREFIX)/ruby \
		--enable-shared \
		--disable-pthread
	touch $@

# compile ruby
$(RUBY_OBJDIR)/.compiled: $(RUBY_OBJDIR)/.configured
	(cd $(RUBY_OBJDIR) && make)
	touch $@

# install ruby
$(RUBY_OBJDIR)/.installed: $(RUBY_OBJDIR)/.compiled
	(cd $(RUBY_OBJDIR) && make install)
	touch $@

#######################################################################
# bz2
#######################################################################

bz2-retrieve:	$(BZ2_OBJDIR)/.retrieved
bz2-compile:	$(BZ2_OBJDIR)/.compiled
bz2-install:	$(BZ2_OBJDIR)/.installed
bz2-reset:
	$(foreach f, .retrieved .configured .compiled .installed, \
		rm -f $(BZ2_OBJDIR)/$(f);)

bz2-clean:
	-(cd $(BZ2_SRCDIR) && make distclean)

# fetch distfile for bz2
$(DISTDIR)/$(BZ2_DIST):
	cd $(DISTDIR) && $(FETCH_CMD) $(BZ2_URL)

# retrieve bz2
$(BZ2_OBJDIR)/.retrieved: $(DISTDIR)/$(BZ2_DIST)
	[ -d $(BZ2_OBJDIR) ] || mkdir -p $(BZ2_OBJDIR)
	tar -C $(SRCDIR) -zxf $(DISTDIR)/$(BZ2_DIST)
	touch $@

# compile bz2
$(BZ2_OBJDIR)/.compiled: $(BZ2_OBJDIR)/.retrieved
	(cd $(BZ2_SRCDIR) && make CFLAGS="-g $(PROFILE_CFLAGS) -fPIC")
	touch $@

# install bz2
$(BZ2_OBJDIR)/.installed: $(BZ2_OBJDIR)/.compiled
	(cd $(BZ2_SRCDIR) && make install PREFIX=$(PREFIX)/bz2)
	touch $@


#######################################################################
# python
#######################################################################

python-retrieve:	$(PYTHON_OBJDIR)/.retrieved
python-configure:	$(PYTHON_OBJDIR)/.configured
python-compile:	$(PYTHON_OBJDIR)/.compiled
python-install:	$(PYTHON_OBJDIR)/.installed
python-reset:
	$(foreach f, .retrieved .configured .compiled .installed, \
		rm -f $(PYTHON_OBJDIR)/$(f);)

python-clean:
	-(cd $(PYTHON_OBJDIR) && make distclean)

# fetch distfile for python
$(DISTDIR)/$(PYTHON_DIST):
	cd $(DISTDIR) && $(FETCH_CMD) $(PYTHON_URL)

# retrieve python
#
$(PYTHON_OBJDIR)/.retrieved: $(DISTDIR)/$(PYTHON_DIST)
	[ -d $(PYTHON_OBJDIR) ] || mkdir -p $(PYTHON_OBJDIR)
	tar -C $(SRCDIR) -zxf $(DISTDIR)/$(PYTHON_DIST)
	# Make setup.py use our own dependencies instead of system ones
	sed -e "s#sqlite_inc_paths = \[ '/usr/include',#sqlite_inc_paths = [ '$(PREFIX)/sqlite/include',#" \
		-e "s#'/usr/include/db4'#'$(PREFIX)/bdb/include'#" \
		-e "s|\(add_dir_to_list(self.compiler.library_dirs, '/usr/local/lib')\)|#\1|" \
		-e "s|\(add_dir_to_list(self.compiler.include_dirs, '/usr/local/include')\)|#\1|" \
		-e "s#find_library_file(lib_dirs, 'bz2'#find_library_file(['$(PREFIX)/bz2/lib'] + lib_dirs, 'bz2'#" \
		< $(PYTHON_SRCDIR)/setup.py \
		> $(PYTHON_SRCDIR)/setup.py.patched
	mv $(PYTHON_SRCDIR)/setup.py.patched $(PYTHON_SRCDIR)/setup.py
	chmod +x $(PYTHON_SRCDIR)/setup.py
	# Fixes shared library linking on OpenBSD
	# http://bugs.python.org/issue12560
	# Also fix compilation error on OpenBSD 5.0 and later (undefined
	# reference to 'lstat' -- already fixed in hg.python.org/cpython).
	sed -e '4930s#NetBSD\*|#NetBSD*|OpenBSD*|#' \
	 	-e 's#OpenBSD/4\.\[789\]#OpenBSD/*#' \
		< $(PYTHON_SRCDIR)/configure \
		> $(PYTHON_SRCDIR)/configure.patched
	mv $(PYTHON_SRCDIR)/configure.patched $(PYTHON_SRCDIR)/configure
	chmod +x $(PYTHON_SRCDIR)/configure
	touch $@

# configure python
ifdef PROFILE
PYTHON_PROFILING=--enable-profiling
endif
$(PYTHON_OBJDIR)/.configured: $(PYTHON_OBJDIR)/.retrieved
	cd $(PYTHON_OBJDIR) \
		&& env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`" \
		CPPFLAGS="-I$(PREFIX)/bz2/include" \
		LDFLAGS="-Wl,-rpath=$(PREFIX)/python/lib -L$(PREFIX)/bz2/lib" \
		$(PYTHON_SRCDIR)/configure \
		--prefix=$(PREFIX)/python \
		--enable-shared \
		--with-system-expat \
		--with-dbmliborder=bdb \
		$(PYTHON_PROFILING)
	touch $@

# compile python
$(PYTHON_OBJDIR)/.compiled: $(PYTHON_OBJDIR)/.configured
	(cd $(PYTHON_OBJDIR) && make)
	touch $@

# install python
$(PYTHON_OBJDIR)/.installed: $(PYTHON_OBJDIR)/.compiled
	(cd $(PYTHON_OBJDIR) && make install)
	touch $@


#######################################################################
# junit
#######################################################################

# fetch distfile for junit
$(DISTDIR)/$(JUNIT_DIST):
	cd $(DISTDIR) && $(FETCH_CMD) $(JUNIT_URL)

#######################################################################
# svn
#######################################################################

.PHONY: svn-configure svn-compile svn-install svn-bindings-compile \
	svn-bindings-install svn-bindings-reset svn-clean

svn-install-all: svn-install svn-bindings-install

svn-configure:	$(SVN_OBJDIR)/.configured
svn-compile:	$(SVN_OBJDIR)/.compiled
svn-bindings-compile:	$(SVN_OBJDIR)/.bindings-compiled
svn-install:	$(SVN_OBJDIR)/.installed
svn-bindings-install:	$(SVN_OBJDIR)/.bindings-installed
svn-bindings-reset:
	$(foreach f, .bindings-compiled .bindings-installed, \
		rm -f $(SVN_OBJDIR)/$(f);)
svn-reset: svn-bindings-reset
	$(foreach f, .retrieved .configured .compiled .installed \
	        .bindings-compiled .bindings-installed, \
		rm -f $(SVN_OBJDIR)/$(f);)

svn-clean:
	-(cd $(svn_builddir) && make distclean)

# retrieve svn if not present yet
$(SVN_OBJDIR)/.retrieved:
	[ -d $(SVN_OBJDIR) ] || mkdir -p $(SVN_OBJDIR)
	if [ "$(TAG)" != "none" ]; then \
		branchdir="tags/$(TAG)"; \
		co="export"; \
	elif [ $(BRANCH) != trunk ]; then \
		branchdir="branches/$(BRANCH)"; \
		co="co"; \
	else \
		branchdir="$(BRANCH)"; \
		co="co"; \
	fi; \
	if [ ! -d $(SVN_WC) ] && [ ! -h $(SVN_WC) ]; then \
		svn $${co} $(SUBVERSION_REPOS_URL)/$${branchdir} \
			$(SVN_WC); \
	fi
	touch $@

ifeq ($(BRANCH_MAJOR),1.7)
BDB_FLAG=db.h:$(PREFIX)/bdb/include:$(PREFIX)/bdb/lib:db-$(BDB_MAJOR_VER)
SERF_FLAG=--with-serf="$(PREFIX)/serf"
MOD_DAV_SVN=modules/svn-$(WC)/mod_dav_svn.so
MOD_AUTHZ_SVN=modules/svn-$(WC)/mod_authz_svn.so
LIBMAGIC_FLAG=--with-libmagic=$(PREFIX)/libmagic
NEON_FLAG=--with-neon="$(PREFIX)/neon"
else ifeq ($(BRANCH_MAJOR),1.6)
BDB_FLAG=db.h:$(PREFIX)/bdb/include:$(PREFIX)/bdb/lib:db-$(BDB_MAJOR_VER)
SERF_FLAG=--with-serf="$(PREFIX)/serf"
MOD_DAV_SVN=modules/svn-$(WC)/mod_dav_svn.so
MOD_AUTHZ_SVN=modules/svn-$(WC)/mod_authz_svn.so
W_NO_SYSTEM_HEADERS=-Wno-system-headers
NEON_FLAG=--with-neon="$(PREFIX)/neon"
else ifeq ($(BRANCH_MAJOR),1.5)
BDB_FLAG=$(PREFIX)/bdb
SERF_FLAG=--with-serf="$(PREFIX)/serf-old"
MOD_DAV_SVN=modules/mod_dav_svn.so
MOD_AUTHZ_SVN=modules/mod_authz_svn.so
DISABLE_NEON_VERSION_CHECK=--disable-neon-version-check
W_NO_SYSTEM_HEADERS=-Wno-system-headers
NEON_FLAG=--with-neon="$(PREFIX)/neon"
else # 1.8
BDB_FLAG=db.h:$(PREFIX)/bdb/include:$(PREFIX)/bdb/lib:db-$(BDB_MAJOR_VER)
SERF_FLAG=--with-serf="$(PREFIX)/serf"
MOD_DAV_SVN=modules/svn-$(WC)/mod_dav_svn.so
MOD_AUTHZ_SVN=modules/svn-$(WC)/mod_authz_svn.so
LIBMAGIC_FLAG=--with-libmagic=$(PREFIX)/libmagic
endif

ifeq ($(ENABLE_JAVA_BINDINGS),yes)
	JAVAHL_FLAG=--enable-javahl=yes --with-jdk --with-jikes=no \
		--with-junit=$(DISTDIR)/$(JUNIT_DIST)
else
	JAVAHL_FLAG=--with-jdk=no
endif

ifdef PROFILE
SVN_ALL_STATIC=--enable-all-static
else
SVN_WITH_HTTPD=--with-apxs="$(PREFIX)/httpd/bin/apxs" \
	--with-apache-libexecdir="$(PREFIX)/httpd/modules/svn-$(WC)"
SVN_WITH_SASL=--with-sasl="$(PREFIX)/cyrus-sasl"
endif

# configure svn
$(SVN_OBJDIR)/.configured: $(SVN_OBJDIR)/.retrieved $(DISTDIR)/$(JUNIT_DIST)
	cd $(SVN_SRCDIR) && ./autogen.sh
	cd $(svn_builddir) && \
		env LDFLAGS="-L$(PREFIX)/neon/lib -L$(PREFIX)/apr/lib" \
			LD_LIBRARY_PATH="$(LD_LIBRARY_PATH):$$LD_LIBRARY_PATH" \
			GREP="`which grep`" \
			PATH=$(PREFIX)/ruby/bin:$(PREFIX)/python/bin:$$PATH \
			$(SVN_SRCDIR)/configure \
			--enable-maintainer-mode \
			--with-ssl \
			--prefix="$(SVN_PREFIX)" \
			--with-apr="$(PREFIX)/apr" \
			--with-apr-util="$(PREFIX)/apr" \
			$(NEON_FLAG) \
			$(SVN_WITH_HTTPD) \
			$(SVN_WITH_SASL) \
			$(SERF_FLAG) \
			--with-sqlite="$(PREFIX)/sqlite" \
			--with-berkeley-db="$(BDB_FLAG)" \
			--with-ruby-sitedir="$(SVN_PREFIX)/lib/ruby/site_ruby" \
			--disable-mod-activation \
			$(JAVAHL_FLAG) \
			$(LIBMAGIC_FLAG) \
			$(SVN_ALL_STATIC) \
			$(DISABLE_NEON_VERSION_CHECK)
	touch $@

# compile svn
$(SVN_OBJDIR)/.compiled: $(SVN_OBJDIR)/.configured
	cd $(svn_builddir) \
		&& make EXTRA_CFLAGS="$(PROFILE_CFLAGS) $(W_NO_SYSTEM_HEADERS)"
	touch $@

# install svn
$(SVN_OBJDIR)/.installed: $(SVN_OBJDIR)/.compiled
	cd $(svn_builddir) \
		&& make install
	touch $@

# SWIG 1.x and 2.x are not compatible. If SWIG 2.x is used to generated .swg
# files and 1.x is used to build the bindings, the Python bindings fail to
# load with errors such as "undefined symbol 'SWIG_Python_str_AsChar'".
# So clean any pre-generated .swg files to make sure everything is done
# by the same version of SWIG.
$(SVN_OBJDIR)/.pre-generated-swig-cleaned:
	-cd $(svn_builddir) \
		&& make extraclean-swig
	touch $@

$(SVN_OBJDIR)/.bindings-compiled: $(SVN_OBJDIR)/.installed $(SVN_OBJDIR)/.pre-generated-swig-cleaned
	cd $(svn_builddir) \
		&& env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \
			make swig-py
	cd $(svn_builddir) && \
		env PATH=$(PREFIX)/ruby/bin:$$PATH \
		LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) make swig-rb
	if [ $(ENABLE_PERL_BINDINGS) = yes ]; then \
		cd $(svn_builddir) \
			&& env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \
				make swig-pl; \
	fi
	if [ $(ENABLE_JAVA_BINDINGS) = yes ]; then \
		cd $(svn_builddir) \
			&& make javahl; \
	fi
	touch $@

$(SVN_OBJDIR)/.bindings-installed: $(SVN_OBJDIR)/.bindings-compiled
	cd $(svn_builddir) \
	  && env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \
		make install-swig-py
	cd $(svn_builddir) && \
		env PATH=$(PREFIX)/ruby/bin:$$PATH \
		LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) make install-swig-rb
	if [ $(ENABLE_PERL_BINDINGS) = yes ]; then \
		cd $(svn_builddir) \
	    && make install-swig-pl-lib; \
	  cd subversion/bindings/swig/perl/native \
		  && perl Makefile.PL PREFIX="$(SVN_PREFIX)" \
		  && make install; \
	fi
	if [ $(ENABLE_JAVA_BINDINGS) = yes ]; then \
		cd $(svn_builddir) \
			&& make install-javahl; \
	fi
	touch $@

# run svn regression tests
HTTPD_CHECK_CONF=$(PREFIX)/httpd/conf/httpd-svn-check-$(WC).conf
HTTPD_CHECK_USERS=$(PREFIX)/httpd/conf/httpd-svn-check-users
HTTPD_CHECK_PORT=8081

$(HTTPD_CHECK_USERS):
	mkdir -p $(dir $@)
	echo > $@.tmp 'jrandom:xCGl35kV9oWCY'
	echo >>$@.tmp 'jconstant:xCGl35kV9oWCY'
	mv -f $@.tmp $@

$(HTTPD_CHECK_CONF): $(HTTPD_CHECK_USERS)
	echo > $@.tmp '# httpd config for make check'
	echo >>$@.tmp 'ServerRoot "$(PREFIX)/httpd"'
	echo >>$@.tmp 'Listen localhost:$(HTTPD_CHECK_PORT)'
	echo >>$@.tmp 'LoadModule dav_svn_module $(MOD_DAV_SVN)'
	echo >>$@.tmp 'LoadModule authz_svn_module $(MOD_AUTHZ_SVN)'
	echo >>$@.tmp 'DocumentRoot "$(PREFIX)/httpd/htdocs"'
	echo >>$@.tmp '# These two Locations are used for "make check"'
	echo >>$@.tmp '<Directory />'
	echo >>$@.tmp '    Options FollowSymLinks'
	echo >>$@.tmp '    AllowOverride None'
	echo >>$@.tmp '    Order deny,allow'
	echo >>$@.tmp '    Allow from all'
	echo >>$@.tmp '</Directory>'
	echo >>$@.tmp '<Location /svn-test-work/repositories>'
	echo >>$@.tmp '    DAV svn'
	echo >>$@.tmp '    SVNParentPath $(SVN_WC)/subversion/tests/cmdline/svn-test-work/repositories'
	echo >>$@.tmp '    AuthzSVNAccessFile $(SVN_WC)/subversion/tests/cmdline/svn-test-work/authz'
	echo >>$@.tmp '    AuthType Basic'
	echo >>$@.tmp '    AuthName "Subversion Repository"'
	echo >>$@.tmp '    AuthUserFile $(HTTPD_CHECK_USERS)'
	echo >>$@.tmp '    Require valid-user'
ifeq ($(USE_HTTPV1),yes)
	echo >>$@.tmp '    SVNAdvertiseV2Protocol off'
endif
ifeq ($(USE_AUTHZ_SHORT_CIRCUIT),yes)
	echo >>$@.tmp '    SVNPathAuthz short_circuit'
endif
	echo >>$@.tmp '</Location>'
	echo >>$@.tmp '<Location /svn-test-work/local_tmp/repos>'
	echo >>$@.tmp '    DAV svn'
	echo >>$@.tmp '    SVNPath $(SVN_WC)/subversion/tests/cmdline/svn-test-work/local_tmp/repos'
	echo >>$@.tmp '    AuthzSVNAccessFile $(SVN_WC)/subversion/tests/cmdline/svn-test-work/authz'
	echo >>$@.tmp '    AuthType Basic'
	echo >>$@.tmp '    AuthName "Subversion Repository"'
	echo >>$@.tmp '    AuthUserFile $(HTTPD_CHECK_USERS)'
	echo >>$@.tmp '    Require valid-user'
ifeq ($(USE_HTTPV1),yes)
	echo >>$@.tmp '    SVNAdvertiseV2Protocol off'
endif
ifeq ($(USE_AUTHZ_SHORT_CIRCUIT),yes)
	echo >>$@.tmp '    SVNPathAuthz short_circuit'
endif
	echo >>$@.tmp '</Location>'
	echo >>$@.tmp '# This Location lets you access repositories dropped in /tmp/'
	echo >>$@.tmp '<Location /svn>'
	echo >>$@.tmp '    DAV svn'
	echo >>$@.tmp '    SVNParentPath /tmp'
	echo >>$@.tmp '    Allow from all'
ifeq ($(USE_HTTPV1),yes)
	echo >>$@.tmp '    SVNAdvertiseV2Protocol off'
endif
ifeq ($(USE_AUTHZ_SHORT_CIRCUIT),yes)
	echo >>$@.tmp '    SVNPathAuthz short_circuit'
endif
	echo >>$@.tmp '</Location>'
	echo >>$@.tmp 'RedirectMatch permanent ^/svn-test-work/repositories/REDIRECT-PERM-(.*)$$ /svn-test-work/repositories/$$1'
	echo >>$@.tmp 'RedirectMatch ^/svn-test-work/repositories/REDIRECT-TEMP-(.*)$$ /svn-test-work/repositories/$$1'
	mv -f $@.tmp $@

.PHONY: libpath
libpath:
	@echo export LD_LIBRARY_PATH="$(LD_LIBRARY_PATH):$$LD_LIBRARY_PATH" \
		"PYTHONPATH=$(SVN_PREFIX)/lib/svn-python"

.PHONY: start-svnserve stop-svnserve start-httpd stop-httpd

HTTPD_CMD = env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \
		$(PREFIX)/httpd/bin/apachectl -f $(HTTPD_CHECK_CONF)
HTTPD_START_CMD = $(HTTPD_CMD) -k start
HTTPD_START_CMD_DEBUG = $(HTTPD_START_CMD) -X
HTTPD_STOP_CMD = $(HTTPD_CMD) -k stop; sleep 3

SVNSERVE_START_CMD = (ls $(PWD)/svnserve-*.pid | while read pidfile; do \
				kill `cat "$$pidfile"`; sleep 3; \
				rm -f $$pidfile; \
			done); \
			$(SVN_PREFIX)/bin/svnserve \
			--listen-host 127.0.0.1 \
			--pid-file $(PWD)/svnserve-$(WC).pid \
			-d -r $(svn_builddir)/subversion/tests/cmdline
SVNSERVE_STOP_CMD = kill `cat $(PWD)/svnserve-$(WC).pid`; sleep 3; \
			rm -f $(PWD)/svnserve-$(WC).pid

start-httpd: $(HTTPD_CHECK_CONF)
	$(HTTPD_START_CMD)
	@echo "To run tests over http, run:"
	@echo "    make check BASE_URL=http://localhost:$(HTTPD_CHECK_PORT)"
	@echo "The URL http://localhost:$(HTTPD_CHECK_PORT)/svn/"
	@echo "lets you access repositories dropped into /tmp"

start-httpd-debug: $(HTTPD_CHECK_CONF)
	$(HTTPD_START_CMD_DEBUG) &
	@echo "To run tests over http, run:"
	@echo "    make check BASE_URL=http://localhost:$(HTTPD_CHECK_PORT)"
	@echo "The URL http://localhost:$(HTTPD_CHECK_PORT)/svn/"
	@echo "lets you access repositories dropped into /tmp"
	@echo "Trying to attach gdb to httpd..."
	@sleep 1
	gdb $(PREFIX)/httpd/bin/httpd `cat $(PREFIX)/httpd/logs/httpd.pid`

stop-httpd:
	$(HTTPD_STOP_CMD)

start-svnserve: $(SVN_OBJDIR)/.compiled
	$(SVNSERVE_START_CMD)

stop-svnserve:
	$(SVNSERVE_STOP_CMD)

define do_check
-cd $(svn_builddir) && for fs in fsfs bdb; do \
    echo "Begin test: $(subst svn-check-,,$@) x $$fs"; \
    test -d "$(RAMDISK)/tmp" && export TMPDIR="$(RAMDISK)/tmp"; \
    env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \
        make check PARALLEL=$(PARALLEL) CLEANUP=$(CLEANUP) $1 FS_TYPE=$$fs; \
    for log in tests.log fails.log; do \
        test -f $$log && mv -f $$log $$log.$@-$$fs; \
    done; \
done
endef

TEST_WORK=$(svn_builddir)/subversion/tests/cmdline/svn-test-work
svn-check-prepare-ramdisk:
	-rm -rf "$(TEST_WORK)"; \
	if [ -d "$(RAMDISK)" ] && \
		touch "$(RAMDISK)/$(SVN_REL_WC).writetest" && \
		mkdir -p "$(RAMDISK)/$(SVN_REL_WC)"; then \
			rm -f "$(RAMDISK)/$(SVN_REL_WC).writetest"; \
			ln -s "$(RAMDISK)/$(SVN_REL_WC)" "$(TEST_WORK)"; \
			mkdir -p "$(RAMDISK)/tmp"; \
	fi

ifndef NEON_FLAG
svn-check-neon:
	@echo Neon is not supported by this build of Subversion, skipping tests
	@true
else
svn-check-neon: $(HTTPD_CHECK_CONF) $(SVN_OBJDIR)/.compiled $(SVN_OBJDIR)/.bindings-compiled svn-check-prepare-ramdisk
	$(HTTPD_START_CMD)
	$(call do_check,BASE_URL=http://localhost:$(HTTPD_CHECK_PORT) HTTP_LIBRARY=neon)
	$(HTTPD_STOP_CMD)
endif

svn-check-serf: $(HTTPD_CHECK_CONF) $(SVN_OBJDIR)/.compiled $(SVN_OBJDIR)/.bindings-compiled svn-check-prepare-ramdisk
	$(HTTPD_START_CMD)
	$(call do_check,BASE_URL=http://localhost:$(HTTPD_CHECK_PORT) HTTP_LIBRARY=serf)
	$(HTTPD_STOP_CMD)

svn-check-local: svn-check-prepare-ramdisk
	$(call do_check)

svn-check-svn: svn-check-prepare-ramdisk
	$(SVNSERVE_START_CMD)
	$(call do_check,BASE_URL=svn://127.0.0.1)
	$(SVNSERVE_STOP_CMD)

.PHONY: svn-check-swig-pl svn-check-swig-py svn-check-swig-rb svn-check-javahl
svn-check-bindings: svn-check-swig-pl svn-check-swig-py svn-check-swig-rb \
	svn-check-javahl

RUBYLIB=$(SVN_PREFIX)/lib/ruby/site_ruby$(shell grep \
	^svn_cv_ruby_sitedir_archsuffix $(svn_builddir)/config.log | \
	cut -d'=' -f2):$(SVN_PREFIX)/lib/ruby/site_ruby$(shell \
	grep ^svn_cv_ruby_sitedir_libsuffix $(svn_builddir)/config.log | \
	cut -d'=' -f2)
svn-check-swig-pl:
	-if [ $(ENABLE_PERL_BINDINGS) = yes ]; then \
		(cd $(svn_builddir) && \
			env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \
			make check-swig-pl 2>&1) | \
				tee $(svn_builddir)/tests.log.bindings.pl; \
	fi

svn-check-swig-py:
	-(cd $(svn_builddir) && \
		env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \
		make check-swig-py 2>&1) | \
			tee $(svn_builddir)/tests.log.bindings.py

# We add the svn prefix to PATH here because the ruby tests
# attempt to start an svnserve binary found in PATH.
svn-check-swig-rb:
	(cd $(svn_builddir) && \
		env RUBYLIB=$(RUBYLIB) \
		LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \
		PATH=$(SVN_PREFIX)/bin:$$PATH \
			make check-swig-rb 2>&1) | \
			tee $(svn_builddir)/tests.log.bindings.rb

svn-check-javahl:
	-if [ $(ENABLE_JAVA_BINDINGS) = yes ]; then \
		(cd $(svn_builddir) && \
			env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \
			make check-all-javahl 2>&1) | \
				tee $(svn_builddir)/tests.log.bindings.javahl; \
	fi

svn-check: svn-check-prepare-ramdisk svn-check-local svn-check-svn \
	svn-check-neon svn-check-serf svn-check-bindings

.PHONY: sign-email
sign-email:
	@echo "Summary: +1 to release"
	@echo ""
	@echo "Tested: [bdb | fsfs] x [ra_local | ra_svn | ra_neon | ra_serf]"
	@echo "        swig bindings"
ifeq ($(ENABLE_JAVA_BINDINGS),yes)
	@echo "	       javahl bindings"
endif
	@echo ""
	@echo "Test results: All passed."
	@echo ""
	@echo "Platform: `uname -r -s -m`"
	@echo ""
	@echo "Dependencies:"
	@echo "bdb:        $(BDB_VER)"
ifeq ($(USE_APR_ICONV),yes)
	@echo "apr-iconv:  $(APR_ICONV_VER)"
else
	@echo "GNU-iconv:  $(GNU_ICONV_VER)"
endif
	@echo "apr:        $(APR_VER)"
	@echo "apr-util:   $(APR_UTIL_VER)"
	@echo "httpd:      $(HTTPD_VER)"
	@echo "neon:       $(NEON_VER)"
	@echo "serf:       $(SERF_VER)"
	@echo "cyrus-sasl: $(CYRUS_SASL_VER)"
	@echo "sqlite:     $(SQLITE_VER)"
	@echo "openssl:    `openssl version | cut -d' ' -f2`"
	@echo "swig:       `swig -version | grep Version | cut -d' ' -f3`"
	@echo "python:     $(PYTHON_VER)"
	@echo "perl:       `eval \`perl -V:version\`; echo $$version`"
	@echo "ruby:       $(RUBY_VER)"
ifeq ($(ENABLE_JAVA_BINDINGS),yes)
	@echo "java:       `java -version 2>&1 | grep version | cut -d' ' -f3  | sed -e 's/\"//g'`"
endif
	@echo ""
	@echo "Signatures:"
	@echo
	@echo "subversion-$(TAG).tar.gz"
	@echo "`cat subversion-$(TAG).tar.gz.asc`" 
	@echo
	@echo "subversion-$(TAG).tar.bz2"
	@echo "`cat subversion-$(TAG).tar.bz2.asc`"