'encoding UTF-8  Do not remove or change this line!
'*************************************************************************
'
'  Licensed to the Apache Software Foundation (ASF) under one
'  or more contributor license agreements.  See the NOTICE file
'  distributed with this work for additional information
'  regarding copyright ownership.  The ASF licenses this file
'  to you under the Apache License, Version 2.0 (the
'  "License"); you may not use this file except in compliance
'  with the License.  You may obtain a copy of the License at
'  
'    http://www.apache.org/licenses/LICENSE-2.0
'  
'  Unless required by applicable law or agreed to in writing,
'  software distributed under the License is distributed on an
'  "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
'  KIND, either express or implied.  See the License for the
'  specific language governing permissions and limitations
'  under the License.
'
'*************************************************************************
'*
'* short description :  Testcases with connection to the Insert-menu.
'*
'\***********************************************************************

sub w_004_

    printLog Chr(13) + "---------  Insert Menu ( w_004_ ) ----------"
    gApplication = "WRITER"

    call tInsertManualBreak
    call tInsertFields
    call tInsertFieldsOther
    call tInsertSpecialCharacter
    call tInsertSection
    call tInsertHyperlink
    call tInsertFootnote
    call tInsertCaption
    call tInsertBookmark
    call tInsertComment
    call tInsertCrossReference
    call tInsertScript
    call tInsertIndexesEntry
    call tInsertIndexesIndex
    call tInsertIndexesBibliographyEntry
    call tInsertEnvelope
    call tInsertFrame
    call tInsertTable

end sub

'-----------------------------------------------------------

testcase tInsertManualBreak
    PrintLog "- Insert / Manual Break"

    printlog " Open new document"
    Call hNewDocument

    printlog " Insert / Manual break"
    InsertManualBreak

    printlog " Close 'Insert break' dialog with cancel"
    Kontext "UmbruchEinfuegen"
    Call DialogTest ( UmbruchEinfuegen )
    UmbruchEinfuegen.Cancel

    printlog " Close active document"
    Call hCloseDocument
endcase

'-----------------------------------------------------------

testcase tInsertFields
    PrintLog "- Insert / Fields"

    printlog " Open new document"
    Call hNewDocument

    try
        printlog "Insert / Fields / Date"
        InsertFieldsDate
    catch
        Warnlog "Unable to execute: Insert / Fields / Date "
    endcatch
    printlog " Insert / Fields / Date"
    Call wTypeKeys (" <Return>")
    try
        printlog "Insert / Fields / Time"
        InsertFieldsTime
    catch
        Warnlog "Unable to execute: Insert / Fields / Time"
    endcatch
    printlog " Insert / Fields / Time"
    Call wTypeKeys (" <Return>")
    try
        printlog "Insert / Fields / Page Number"
        InsertFieldsPageNumbers
    catch
        Warnlog "Unable to execute: Insert / Fields / Page numbers"
    endcatch
    printlog " Insert / Fields / Page numbers"
    Call wTypeKeys (" <Return>")
    try
        printlog "Insert / Fields / Page Count"
        InsertFieldsPageCount
    catch
        Warnlog "Unable to execute: Insert / Fields / Page Count"
    endcatch
    printlog " Insert / Fields / Page count"
    Call wTypeKeys (" <Return>")
    try
        printlog "Insert / Fields / Title"
        InsertFieldsTitle
    catch
        Warnlog "Unable to execute: Insert / Fields / Title"
    endcatch
    printlog " Insert / Fields / Title"
    Call wTypeKeys (" <Return>")
    try
        printlog "Insert / Fields / Author"
        InsertFieldsAuthor
    catch
        Warnlog "Unable to execute: Insert / Fields / Author"
    endcatch
    printlog " Insert / Fields / Author"
    if gApplication <> "HTML" then
        try
            printlog "Insert / Fields / Subject"
            InsertFieldsSubject
        catch
            Warnlog "Unable to execute: Insert / Fields / Subject"
        endcatch
        printlog " If document not HTML then  'Insert / Fields / Subject"
        Call wTypeKeys (" <Return>")
        printlog " Press key 'enter'"
    end if

    printlog " Close active document"
    Call hCloseDocument
endcase

'-----------------------------------------------------------

testcase tInsertFieldsOther
    Dim i as integer
    Dim j as integer
    printlog "- Insert / Fields / Other"

    printlog " Open new document"
    Call hNewDocument

    printlog " Insert / Fields / Other"
    InsertFieldsOther

    Kontext
    printlog " In dialog step through all tabpages"
    Active.SetPage TabDokumentFeldbefehle
    Kontext "TabDokumentFeldbefehle"
    Call Dialogtest ( TabDokumentFeldbefehle )

    Kontext
    Active.SetPage TabDokumentinfoFeldbefehle
    Kontext "TabDokumentinfoFeldbefehle"
    Call Dialogtest ( TabDokumentinfoFeldbefehle )

    Kontext
    Active.SetPage TabVariablen
    Kontext "TabVariablen"
    Call Dialogtest ( TabVariablen )

    if gApplication <> "HTML" then
        Kontext
        Active.SetPage TabReferenzen
        Kontext "TabReferenzen"
        Call Dialogtest ( TabReferenzen )

        Kontext
        Active.SetPage TabFunktionen
        Kontext "TabFunktionen"
        Call Dialogtest ( TabFunktionen )
        for i=1 to Feldtyp.GetItemCount
            Feldtyp.Select i
            if MakroButton.IsEnabled then
                MakroButton.Click
                ' if no JRE is installed a messagebox appears
                Do
                    j = j + 1
                    Kontext "Active"
                    if Active.Exists then
                        if Active.GetRT = 304 then
                            if j = 1 then Warnlog Active.Gettext
                            Active.Ok
                        else
                            exit do
                        end if
                    else
                        exit do
                    end if
                Loop
                
                Kontext "ScriptSelector"
                if ( ScriptSelector.exists( 5 ) ) then
                    ScriptSelector.Close
                else
                    warnlog( "Dialog <ScriptSelector> is not available" )
                endif
                Kontext "TabFunktionen"
                i=100
            end if
        next i

        Kontext
        Active.SetPage TabDatenbank
        Kontext "TabDatenbank"
        Call Dialogtest ( TabDatenbank )

        printlog " Close dialog"
        TabDatenbank.Close
    else
        printlog " Close dialog"
        TabVariablen.Close
    end if
    printlog " Close active document"
    Call hCloseDocument
endcase

'-----------------------------------------------------------

testcase tInsertSpecialCharacter
    PrintLog "- Insert / Special Character"

    printlog " Open new document"
    Call hNewDocument

    printlog " Insert / Special Character"
    InsertSpecialCharacterWriter

    Kontext "Sonderzeichen"
    Call DialogTest (Sonderzeichen)
    Sonderzeichen.Cancel

    printlog " Close active document"
    Call hCloseDocument
endcase

'-----------------------------------------------------------

testcase tInsertSection
    PrintLog "- Insert / Section"

    printlog " Open new document"
    Call hNewDocument

    printlog " Insert / Section"
    InsertSection
    Kontext

    printlog "  In dialog step through all tabpages"
    printlog "-  Tabpage Section"
    Active.Setpage TabBereiche
    Kontext "TabBereiche"
    Call DialogTest (TabBereiche)
    Verknuepfung.Check
    if gUseSysDlg = False then
        Auswaehlen.Click
        Kontext "OeffnenDlg"
        OeffnenDlg.Cancel
    end if
    Wait 500
    Kontext
    printlog "-  Tabpage Columns"
    Active.Setpage TabSpalten
    Kontext "TabSpalten"
    Call DialogTest (TabSpalten)

    Kontext
    printlog "-  Tabpage Background"
    Active.Setpage TabHintergrund
    Kontext "TabHintergrund"
    Call DialogTest (TabHintergrund)

    if gApplication <> "HTML" then
        printlog "Tabpage Indents"
        Kontext
        Active.Setpage TabSectionIndent
        Kontext "TabSectionIndent"
        Call DialogTest (TabSectionIndent)

        printlog "-  Tabpage Footnotes/Endnotes"
        Kontext
        Active.Setpage TabFussEndnoten
        Kontext "TabFussEndnoten"
        Call DialogTest (TabFussEndnoten)
        TabFussEndnoten.Cancel
    else
        TabHintergrund.Cancel
    end if
    printlog " Close active document"
    Call hCloseDocument
endcase

'-----------------------------------------------------------

testcase tInsertHyperlink
    Dim i as integer
    PrintLog "- Insert / Hyperlink"

    printlog " Open new document"
    Call hNewDocument

    printlog "-  Internet"
    printlog " Insert / Hyperlink"
    InsertHyperlink

    kontext "HyperlinkDialog"
    if ( HyperlinkDialog.exists( 2 ) ) then

        printlog "  In 'Hyperlink' dialog step through all pages"
        Call wEinfuegenHyperlink(1)
        Call DialogTest ( TabHyperlinkInternet )

        Kontext "Hyperlink"
        printlog "-  Mail & News"
        Call wEinfuegenHyperlink(2)
        wait 500
        Call DialogTest ( TabHyperlinkMailUndNews )

        Kontext "Hyperlink"
        printlog "-  Document"
        Call wEinfuegenHyperlink(3)
        wait 500
        Call DialogTest ( TabHyperlinkDokument )

        DateiOeffnen.Click

        Kontext "OeffnenDlg"
        if ( OeffnenDlg.exists( 1 ) ) then
            OeffnenDlg.Cancel
        else
            warnlog( "Dialog <OeffnenDlg> is not available" )
        endif

        Kontext "Hyperlink"
        printlog "-  New Document"
        Call wEinfuegenHyperlink(4)
        wait 500
        Call DialogTest ( TabHyperlinkNeuesDokument )

        Pfad.Click
        Sleep 1
        Kontext "OeffnenDlg"
        OeffnenDlg.Cancel

        printlog " Close 'Hyperlink' dialog"
        kontext "HyperlinkDialog"
        HyperlinkDialog.Close
    else
        warnlog( "Unable to open <HyperlinkDialog>" )
    endif

    printlog " Close active document"
    Call hCloseDocument
endcase

'-----------------------------------------------------------

testcase tInsertFootnote
    PrintLog "- Insert / Footnote"

    printlog " Open new document"
    Call hNewDocument

    printlog " Insert / Footnote"
    InsertFootnote
    Kontext "FussnoteEinfuegen"
    Call DialogTest (FussnoteEinfuegen)
    Durchsuchen.Click
    printlog " In 'Insert / Footnote' dialog click on browse button"

    printlog " Close 'Special Character' dialog"
    Kontext "Sonderzeichen"
    Sonderzeichen.Cancel

    printlog " Close 'Insert Footnote' dialog"
    Kontext "FussnoteEinfuegen"
    FussnoteEinfuegen.Cancel

    printlog " Close active document"
    Call hCloseDocument
endcase

'-----------------------------------------------------------

testcase tInsertCaption
    PrintLog "- Insert / Caption"

    printlog " Open new document"
    Call hNewDocument

    printlog " Insert graphic '..\writer\required\input\graphics\jolink.jpg"
    Call hGrafikEinfuegen ( gTesttoolPath + "writer\required\input\graphics\jolink.jpg" )
    try
        printlog " Insert / Caption"
        InsertCaption
        Kontext "Beschriftung"
        Call DialogTest ( Beschriftung )
        Sleep 1
        printlog " In 'Caption' dialog click 'Options'"
        WeitereOptionen.Click
        Kontext "NummernkreisOptionen"
        Call DialogTest ( NummernkreisOptionen )
        printlog " Close 'Number Range Options' dialog"
        NummernkreisOptionen.Cancel
        Sleep 1
        Kontext "Beschriftung"
        printlog " Close 'Caption' dialog"
        Beschriftung.Cancel
        Sleep 2
    catch
        Warnlog "Insert / Caption is disabled!"
    endcatch

    printlog " Close active document"
    Call hCloseDocument
endcase

'-----------------------------------------------------------

testcase tInsertBookmark
    PrintLog "- Insert / Bookmark"

    printlog " Open new document"
    Call hNewDocument

    printlog " Insert / Bookmark"
    InsertBookmark
    Kontext "TextmarkeEinfuegen"
    Call DialogTest (TextmarkeEinfuegen)
    wait 500
    printlog " Close 'Insert Bookmark' dialog"
    TextmarkeEinfuegen.Cancel

    printlog " Close active document"
    Call hCloseDocument
endcase

'-----------------------------------------------------------

testcase tInsertComment
    dim sNoteText as String
    PrintLog "- Insert / Comment"

    Call hNewDocument

    printlog " Insert / Comment"
    InsertNoteWriter
    wait 500
    Kontext "DocumentWriter"
    sNoteText = "Comment inserted by testtool !"
    Call wTypeKeys (sNoteText)

    Call wNavigatorAuswahl( 11, 1 )
    Kontext "NavigatorWriter"
    if Auswahlliste.Gettext <> sNoteText then
        warnlog ("Comment was not inserted correctly (Focus problem?")
    end if

    printlog " Close active document"
    Call hCloseDocument
endcase

'-----------------------------------------------------------

testcase tInsertCrossReference
    Dim i as integer
    Dim j as integer
    printlog "- Insert / Reference Field"
    if gApplication = "HTML" then
        printlog "Not in WriterWeb!"
        goto endsub
    end if
    printlog " Open new document"
    Call hNewDocument

    printlog " Insert / Cross reference"
    InsertReferenceField

    Kontext "TabReferenzen"
    if NOT TabReferenzen.IsVisible then Warnlog "Reference Tabpage isn't default!"

    printlog " Step through all tabpages"
    Kontext
    Active.SetPage TabFunktionen
    Kontext "TabFunktionen"
    for i=1 to Feldtyp.GetItemCount
        Feldtyp.Select i
        if MakroButton.IsEnabled then
            MakroButton.Click
            ' if no JRE is installed a messagebox appears
            j = 0
            Do
                j = j + 1
                Kontext "Active"
                if Active.Exists then
                    if Active.GetRT = 304 then
                        if j = 1 then Warnlog Active.Gettext
                        Active.Ok
                    else
                        exit do
                    end if
                else
                    exit do
                end if
            Loop
            Kontext "ScriptSelector"
            if ( ScriptSelector.exists( 3 ) ) then
                ScriptSelector.Close
            else
                warnlog( "Dialog <ScriptSelector> is not available" )
            endif
            Kontext "TabFunktionen"
            i=100
        end if
    next i

    Kontext
    Active.SetPage TabDokumentinfoFeldbefehle
    Kontext "TabDokumentinfoFeldbefehle"

    Kontext
    Active.SetPage TabVariablen
    Kontext "TabVariablen"

    Kontext
    Active.SetPage TabDatenbank
    Kontext "TabDatenbank"

    Kontext
    Active.SetPage TabDokumentFeldbefehle
    Kontext "TabDokumentFeldbefehle"

    printlog " Close dialog"
    TabDokumentFeldbefehle.Close

    printlog " Close active document"
    Call hCloseDocument
endcase

'-----------------------------------------------------------

testcase tInsertScript
    PrintLog "- Insert / Script"

    printlog " Open new document"
    Call hNewDocument

    printlog " Insert / Script"
    InsertScript
    Kontext "ScriptEinfuegen"
    Call DialogTest (ScriptEinfuegen)
    wait 500
    ScriptEinfuegen.Cancel

    printlog " Close active document"
    Call hCloseDocument
endcase

'-----------------------------------------------------------

testcase tInsertIndexesEntry
    qaErrorLog "#158646# - Insert Indexes Entry causes crash."
    goto endsub

    PrintLog "- Insert / Indexes / Entry"
    if gApplication = "HTML" then
        printlog "Not in WriterWeb!"
        goto endsub
    end if
    printlog " Open new document"
    Call hNewDocument

    printlog " Insert / Indexes and Tables / Entry"
    InsertIndexesEntry
    Kontext "VerzeichniseintragEinfuegen"
    Call DialogTest (VerzeichniseintragEinfuegen)
    printlog " Click 'Insert'"
    EintragNeu.Click

    Kontext "BenutzerverzeichnisDefinieren"
    Call DialogTest (BenutzerverzeichnisDefinieren)
    printlog " Close dialog 'Insert Index Entry'"
    BenutzerverzeichnisDefinieren.Cancel
    Kontext "VerzeichniseintragEinfuegen"
    EinfuegenSchliessen.Click

    printlog " Close active document"
    Call hCloseDocument
endcase

'-----------------------------------------------------------

testcase tInsertIndexesIndex
    Dim i as integer
    Printlog "- Insert / Indexes / Index"
    if gApplication = "HTML" then
        printlog "Not in WriterWeb!"
        goto endsub
    end if
    printlog " Open new document"
    Call hNewDocument

    printlog " Insert / Indexes and Tables / Indexes and Tables"
    InsertIndexes
    WaitSlot (5000)
    Kontext "Active"
    if Active.Exists then
        if Active.GetRT = 304 then
            Warnlog Active.Gettext
            Active.Ok
        end if
    end if
    Sleep 1
    printlog " Step through all Tabpages"
    Kontext
    printlog "-  TabPage Indexes"
    Active.Setpage TabVerzeichnisseVerzeichnis
    Kontext "TabVerzeichnisseVerzeichnis"
    For i= 1 to VerzeichnisTyp.GetItemCount
        Sleep 1
        VerzeichnisTyp.Select i
        printlog "- " + VerzeichnisTyp.GetSelText
        Call DialogTest (TabVerzeichnisseVerzeichnis)
        printlog "-  Entry's to " + VerzeichnisTyp.GetSelText

        if i = 1 then
            ErzeugenAusGliederung.Check
        end if

        if i = 2 then
            if gUseSysDlg = False then
                Konkordanzdatei.Check
                Kontext "KonkordanzdateiOeffnen"
                if KonkordanzdateiOeffnen.Exists then
                    KonkordanzdateiOeffnen.Cancel
                    Warnlog "Open-Dialog comes up at checking the checkbox!"
                end if
                Kontext "TabVerzeichnisseVerzeichnis"
                if KonkordanzAuswahl.IsEnabled then
                    KonkordanzAuswahl.Click
                    wait 500
                    Call hMenuSelectNr ( 1 )
                    Kontext "KonkordanzdateiOeffnen"
                    if KonkordanzdateiOeffnen.Exists then
                        KonkordanzdateiOeffnen.Cancel
                    else
                        Warnlog "No Open-Dialog selecting Concordance-File->Open!"
                    end if
                    Sleep 1
                    Kontext "TabVerzeichnisseVerzeichnis"
                    KonkordanzAuswahl.Click
                    wait 500
                    Call hMenuSelectNr ( 2 )
                    Kontext "SpeichernDlg"
                    if SpeichernDlg.Exists then
                        SpeichernDlg.Cancel
                    else
                        Warnlog "No Open-Dialog selecting Concordance-File->New!"
                    end if
                else
                    Warnlog "- Concordance-File couldn't be selected, though checkbox is checked!"
                end if
                Sleep 1
            end if
        end if

        Kontext
        Active.Setpage TabVerzeichnisseEintraege
        Kontext "TabVerzeichnisseEintraege"
        Call DialogTest (TabVerzeichnisseEintraege)
        Kontext
        Active.Setpage TabVerzeichnisseVerzeichnis
        Kontext "TabVerzeichnisseVerzeichnis"
    next i
    Sleep 1

    Kontext
    printlog "-  Tabpage Styles"
    Active.Setpage TabVerzeichnisseVorlagen
    Kontext "TabVerzeichnisseVorlagen"
    Call DialogTest (TabVerzeichnisseVorlagen)
    Sleep 1
    printlog "- Tabpage Columns"
    Kontext
    Active.Setpage TabSpalten
    Kontext "TabSpalten"
    Call DialogTest (TabSpalten)
    Sleep 1
    printlog "- Tabpage Background"
    Kontext
    Active.Setpage TabHintergrund
    Kontext "TabHintergrund"
    TabHintergrund.Cancel
    Sleep 1
    printlog " Close active document"
    Call hCloseDocument

    Sleep 2
    printlog " Open new document"
    Call hNewDocument
    Sleep 2

    printlog " View Zoom"
    ViewZoom

    Kontext "Massstab"
    printlog " Check if 100% Zoom is checked ( Had a bug changed after opening Index dialog )"
    if Massstab.Exists then
        if Not Vergroesserung100.IsChecked then
            Warnlog "100% Zoom is not checked.Maybe Bug#95871! Set Zoom to 100%!"
            Vergroesserung100.Check
            Massstab.ok
        else
            Massstab.Cancel
            printlog " Close 'Zoom' dialog"
        end if
    else
        Warnlog "Dialog 'Zoom' does not exist!"
    end if
    printlog " Close active document"
    Call hCloseDocument
endcase

'-----------------------------------------------------------

testcase tInsertIndexesBibliographyEntry
    Printlog "- Insert / Indexes / Bibliography Entry"
    if gApplication = "HTML" then
        printlog "Not in WriterWeb!"
        goto endsub
    end if
    printlog " Open new document"
    Call hNewDocument
    
    printlog " Insert / Indexes and Tables / Bibliography Entry "
    hUseAsyncSlot( "InsertIndexesBibliographyEntry" )
    
    Kontext "Active"
    if ( Active.Exists() ) then
        Do
            try
                if ( Active.GetRT = 304 ) then
                    Warnlog Active.Gettext
                    Active.Ok
                end if
            catch
                exit do
            endcatch
        Loop
    end if

    Kontext "LiteratureintragEinfuegen"
    if ( LiteratureintragEinfuegen.exists( 1 ) ) then
        Call DialogTest ( LiteratureintragEinfuegen )
        
        printlog " In dialog 'Insert Bibliography Entry' click 'Edit'"
        EintragBearbeiten.Click

        Kontext "LiteratureintragDefinieren"
        if ( LiteratureintragDefinieren.exists( 1 ) ) then
            Call DialogTest ( LiteratureintragDefinieren )
            printlog " Close dialog 'Define Bibliography Entry'"
            LiteratureintragDefinieren.Close
        else
            warnlog( "Dialog <LiteratureintragDefinieren> is not available" )
        endif
        
        Kontext "LiteratureintragEinfuegen"
        printlog " Close dialog 'Insert Bibliography Entry'"
        EintragSchliessen.Click
    else
        warnlog( "Dialog <LiteratureintragEinfuegen> is not available" )
    endif
    printlog " Close active document"
    Call hCloseDocument
endcase

'-----------------------------------------------------------

testcase tInsertEnvelope
    PrintLog "- Insert / Envelope"
    if gApplication = "HTML" then
        printlog "Not in WriterWeb!"
        goto endsub
    end if

    printlog " Open new document"
    Call hNewDocument

    printlog " Insert / Envelope"
    InsertEnvelope

    Kontext
    active.SetPage TabEnvelope
    Kontext "TabEnvelope"
    Call DialogTest (TabEnvelope)

    Kontext
    active.SetPage TabFormatEnvelope
    Kontext "TabFormatEnvelope"
    Call DialogTest (TabFormatEnvelope)
    printlog " Step through all tabpages and click all buttons"

    printlog "-  Edit Addressee"
    Sleep 1
    AddresseeEdit.Click
    wait 500
    Call hMenuSelectNr(1)
    Kontext
    Sleep 1
    Active.Setpage TabFont
    Kontext "TabFont"
    TabFont.Cancel

    Kontext "TabFormatEnvelope"
    Sleep 1
    SenderEdit.Click
    wait 500
    Call hMenuSelectNr(2)
    Kontext
    Sleep 1
    Active.Setpage TabEinzuegeUndAbstaende
    Kontext "TabEinzuegeUndAbstaende"
    TabEinzuegeUndAbstaende.Cancel

    Kontext "TabFormatEnvelope"
    printlog "-  Edit Sender"
    Sleep 1
    SenderEdit.Click
    wait 500
    Call hMenuSelectNr(1)
    Kontext
    Sleep 1
    Active.Setpage TabFont
    Kontext "TabFont"
    TabFont.Cancel

    Kontext "TabFormatEnvelope"
    Sleep 1
    SenderEdit.Click
    wait 500
    Call hMenuSelectNr(2)
    Kontext
    Sleep 1
    Active.Setpage TabEinzuegeUndAbstaende
    Kontext "TabEinzuegeUndAbstaende"
    TabEinzuegeUndAbstaende.Cancel

    Kontext
    Sleep 2
    active.SetPage TabDruckerBriefumschlag
    Kontext "TabDruckerBriefumschlag"
    Call DialogTest (TabDruckerBriefumschlag)
    if gPlatgroup = "w95" then
        Einrichten.Click
        Kontext "DruckerEinrichten"
        if DruckerEinrichten.Exists then
            DruckerEinrichten.Cancel
        else
            Warnlog "No Default-Printer!"
        end if
        Kontext "TabDruckerBriefumschlag"
    end if
    printlog " Close dialog"
    TabDruckerBriefumschlag.Close

    printlog " Close active document"
    Call hCloseDocument
endcase

'-----------------------------------------------------------

testcase tInsertFrame
    PrintLog "- Insert / Frame"

    printlog " Open new document"
    Call hNewDocument

    printlog " Insert / Frame"
    InsertFrame
    WaitSlot (2000)

    printlog " Step through all tabpages"
    Kontext
    active.SetPage TabType
    Kontext "TabType"
    Call DialogTest (TabType)
    Sleep 1

    Kontext
    active.SetPage TabZusaetze
    Kontext "TabZusaetze"
    Call DialogTest (TabZusaetze)
    Sleep 1

    Kontext
    active.SetPage TabUmlauf
    Kontext "TabUmlauf"
    Call DialogTest (TabUmlauf)
    Sleep 1

    Kontext
    active.SetPage TabUmrandung
    Kontext "TabUmrandung"
    Call DialogTest (TabUmrandung)
    Sleep 1

    Kontext
    active.SetPage TabHintergrund
    Kontext "TabHintergrund"
    Call DialogTest (TabHintergrund, 1)
    Sleep 1
    try
        Als.Select (2)
        Call DialogTest (TabHintergrund, 2)
        Sleep 1
    catch
        Warnlog "Maybe missing combobox!"
    endcatch

    if gApplication <> "HTML" then
        Kontext
        active.SetPage TabHyperlinkRahmen
        Kontext "TabHyperlinkRahmen"
        Call DialogTest (TabHyperlinkRahmen)
        Durchsuchen.Click

        if gUSeSysDlg = False then
            Kontext "OeffnenDlg"
            OeffnenDlg.Cancel
        end if

        Kontext
        active.SetPage TabSpalten
        Kontext "TabSpalten"
        Call DialogTest (TabSpalten)
        printlog " Close dialog"
        TabSpalten.Cancel
    else
        printlog " Close dialog"
        TabHintergrund.Cancel
    end if

    printlog " Close active document"
    Call hCloseDocument
endcase

'-----------------------------------------------------------

testcase tInsertTable
    PrintLog "- Insert / Table"

    printlog " Open new document"
    Call hNewDocument
    printlog " Insert / Table"
    InsertTableWriter

    Kontext "TabelleEinfuegenWriter"
    Call DialogTest (TabelleEinfuegenWriter)
    if Spalten.Gettext <> "2" then Warnlog "- Default for Size Columns isn't 2 , it is " + Spalten.Gettext
    if Zeilen.Gettext <> "2" then Warnlog "- Default for Size Row isn't 2, it is " + Zeilen.Gettext
    printlog " In 'insert Table' dialog click 'AutoFormat'"
    Autoformat.Click
    Kontext "AutoformatTabelle"

    printlog " In 'AutoFormat' dialog click 'More'"
    Zusaetze.Click
    Call DialogTest ( AutoformatTabelle )

    if Formatbox.GetItemCount > 2 then
        Formatbox.Select(3)
        Zusaetze.Open
        Umbenennen.Click
        Kontext "AutoformatHinzufuegenWriter"
        Call DialogTest ( AutoformatHinzufuegenWriter )
        TabellenName.SetText "Hallo"
        AutoformatHinzufuegenWriter.Cancel
        Kontext "AutoFormatTabelle"
    else
        Warnlog "Only " + Formatbox.GetItemCount + " Table formats to select ?"
    end if
    printlog " Close dialog 'More'"
    Zusaetze.Close
    printlog " Close dialog 'AutoFormat'"
    AutoformatTabelle.Cancel

    Kontext "TabelleEinfuegenWriter"
    printlog " Close dialog ''"
    TabelleEinfuegenWriter.Cancel

    printlog " Close active document"
    Call hCloseDocument
endcase