'encoding UTF-8  Do not remove or change this line!
'*************************************************************************
'
'  Licensed to the Apache Software Foundation (ASF) under one
'  or more contributor license agreements.  See the NOTICE file
'  distributed with this work for additional information
'  regarding copyright ownership.  The ASF licenses this file
'  to you under the Apache License, Version 2.0 (the
'  "License"); you may not use this file except in compliance
'  with the License.  You may obtain a copy of the License at
'  
'    http://www.apache.org/licenses/LICENSE-2.0
'  
'  Unless required by applicable law or agreed to in writing,
'  software distributed under the License is distributed on an
'  "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
'  KIND, either express or implied.  See the License for the
'  specific language governing permissions and limitations
'  under the License.
'
'*************************************************************************

************
' #1 tEditDuplicate
' #1 tEditFields
' #1 tEditDeleteSlide
' #1 tEditLinks
' #1 tdEditDeleteLayer
' #1 tEditObjectEdit
'\*************************************************************************************

'   sDatei = gTesttoolPath + "graphics\required\input\leer.sx"+left(gApplication,1)
'   sDatei = gTesttoolPath + "graphics\required\input\leer.sx"+left(gApplication,1)
'      Dateiname.SetText ConvertPath (gTesttoolPath + "global\input\graf_inp\enter.bmp")

testcase tEditDuplicate

    dim Ueber_Text_1
    dim Zaehler

    printlog " New Impress document"
    Call hNewDocument
    printlog " Create rectangle"
    Call hRechteckErstellen ( 5, 5, 20, 30 )
    printlog " Select rectangle"
    EditSelectAll
    printlog " Edit-duplicate"
    EditDuplicate
    Kontext "Duplizieren"
    Ueber_Text_1 = AnzahlAnKopien.GetText
    printlog " Set number of copies to 50"
    AnzahlAnKopien.SetText "50"
    printlog " Cancel Edit Duplicate"
    Duplizieren.Cancel
    sleep 1
    For Zaehler = 1 to 8
        printlog " Edit Duplicate"
        EditDuplicate
        sleep 1
        Kontext "Duplizieren"
        printlog " Number of copies = 30"
        AnzahlAnKopien.SetText "30"
        printlog " Setting values for axis and angles"
        Select Case Zaehler
            Case 1:	XAchse.SetText "0,0"
            YAchse.SetText "0,45"
            Hoehe.SetText  "-0,1"
            Breite.SetText "-0,1"
            Drehwinkel.SetText "3"
            Anfang.Select Int((Anfang.GetItemCount * Rnd)+1)
            Case 2,6:	XAchse.SetText "0,6"
            YAchse.SetText "0,0"
            Hoehe.SetText  "0,15"
            Breite.SetText "0,01"
            Drehwinkel.SetText "353"
              Case 3,7:	XAchse.SetText "0,0"
            YAchse.SetText "-0,4"
            Hoehe.SetText  "-0,1"
            Breite.SetText "0,06"
            Drehwinkel.SetText "11"
            Case 4,8:	XAchse.SetText "-0,6"
            YAchse.SetText "0,0"
            Hoehe.SetText  "0,05"
            Breite.SetText "-0,08"
            Drehwinkel.SetText "347"
            Case 5:	XAchse.SetText "0,1"
            YAchse.SetText "0,48"
            Hoehe.SetText  "-0,05"
            Breite.SetText "-0,05"
            Drehwinkel.SetText "355"
        End Select
        Ende.Select Int((Ende.GetItemCount * Rnd)+1)
        printlog " Execute Duplicate"
        Duplizieren.OK
        sleep 1
    Next Zaehler
    sleep 2
    printlog " Close document"
    Call hCloseDocument
 
endcase 'tEditDuplicate
'-------------------------------------------------------------------------------
testcase tEditFields

    Call hNewDocument
    Call sSelectEmptyLayout
    sleep 3
    printlog "insert date-fix"
    InsertFieldsDateFix
    printlog "select inserted field"
    EditSelectAll
    sleep 1
    printlog "go into edit mode"
    hTypeKeys "<F2>"
    sleep 2
    printlog "select date"
    EditSelectAll
    sleep 2
    printlog "edit fields"
    EditfieldsDraw
    Kontext "FeldbefehlBearbeitenDraw"
    sleep 2
    printlog "check field type fix"
    FeldtypFix.Check
    If	FeldtypFix.Ischecked then
        Printlog "OK   FieldtypeFix checkable"
    else
        warnlog "FieldtypeFix not checkable"
    end if
    printlog "check field type variable 1"
    FeldtypVariabel.Check
    sleep 1
    If	FeldtypVariabel.Ischecked then
        Printlog "OK   FieldtypeVariabel enabled"
    else
        warnlog "FieldtypeVariabel not enabled"
    end if
    '   For Zaehler = 1 to FeldtypFormat.GetItemCount
    '    FeldTypFormat.Select Zaehler
    '    printlog "OK   Format ", Zaehler, " = ", FeldtypFormat.GetSelText
    '   Next Zaehler
    printlog "close edit fields dialog"
    FeldbefehlBearbeitenDraw.OK
    sleep 2
    printlog "Close Document"
    Call hCloseDocument
    sleep 2
  
endcase 'tEditFields
'--------------------------------------------------------
testcase tEditDeleteSlide

    dim Ueber_Text_1 as string
    dim Ueber_Text_2 as string
    dim Ueber_Text_3 as string

    printlog " New impress document"
    Call hNewDocument
    sleep 3
    printlog " create rectangle"
    Call hRechteckErstellen ( 30, 30, 70, 70 )
    sleep 1
    printlog " open Position and Size dialog"
    ContextPositionAndSize
    kontext
    Messagebox.SetPage TabPositionAndSize
    kontext "TabPositionAndSize"
    printlog " get position values for rectangle"
    Ueber_Text_1 = PositionX.GetText
    TabPositionAndSize.OK
    printlog " insert slide"
    InsertSlide
    sleep 2
    hTypekeys "<Pagedown>"
    sleep 2
    printlog " create rectangle"
    Call hRechteckErstellen ( 40, 40, 60, 60 )
    sleep 1
    printlog " Delete slide"
    EditDeleteSlide
    sleep 1
    Ueber_Text_2 = "OK   Page was closed"
    Ueber_Text_3 = "Page was not closed"
    printlog " compare position of rectange"
    call Position_Vergleichen (Ueber_Text_1,Ueber_Text_2,Ueber_Text_3)
    sleep 1
    printlog " close document"
    Call hCloseDocument
 
endcase 'tEditDeleteSlide
'--------------------------------------------------------
testcase tEditLinks

    printlog " New document"
    Call  hNewDocument
    printlog " insert graphic (sample.bmp)"
    InsertGraphicsFromFile
    Kontext "GrafikEinfuegenDlg"
    printlog " check link"
    Link.Check
    Dateiname.SetText ConvertPath (gTesttoolPath + "global\input\graf_inp\enter.bmp")
    Oeffnen.Click
    sleep 3
    printlog " edit links"
    EditLinksDraw
    Kontext "VerknuepfungenBearbeiten"
    printlog " refresh"
    Aktualisieren.Click
    sleep 1
    Loesen.Click
    sleep 1
    Kontext
    Messagebox.Yes
    printlog " close dialog"
    VerknuepfungenBearbeiten.Close
    sleep 1
    try
        printlog " check if last changes remain in the dialog"
        EditLinksDraw
        Kontext "VerknuepfungenBearbeiten"
        Loesen.Click
        sleep 1
        Kontext
        Messagebox.Yes
        VerknuepfungenBearbeiten.Close
        warnlog "Break link does not work"
  catch
        printlog "OK   Link broken"
  endcatch
    printlog " close document"
    Call hCloseDocument
 
endcase 'tEditLinks
'---------------------------------------------------------
testcase tdEditDeleteLayer

 dim Ueber_Text_1 as string
 dim Ueber_Text_2 as string
 dim Ueber_Text_3 as string

    printlog " new document"
    Call hNewDocument
    sleep 2
    printlog " create rectangle"
    Call hRechteckErstellen ( 30, 30, 70, 70 )
    sleep 1
    printlog " View->Layer"
    ViewLayer
    printlog " get position values for rectangle"
    ContextPositionAndSize
    kontext
    active.SetPage TabPositionAndSize
    kontext "TabPositionAndSize"
    Ueber_Text_1 = PositionX.GetText
    TabPositionAndSize.OK
    printlog " insert layer"
    InsertLayer
    Kontext "EbeneEinfuegenDlg"
    EbeneEinfuegenDlg.OK
    printlog " create rectangle on created layer"
    Call hRechteckErstellen ( 10, 40, 90, 60 )
    sleep 1
    printlog " delete layer"
    EditDeleteLayer
    sleep 1
    Kontext
    Active.Yes
    sleep 1
    Ueber_Text_2 = "OK   Layer was deleted"
    Ueber_Text_3 = "Layer was not deleted"
    printlog " compare position of selected rectangle with position of created rectangle in deteted layer"
    Call Position_Vergleichen (Ueber_Text_1,Ueber_Text_2,Ueber_Text_3)
    sleep 1
    printlog " close document"
    Call hCloseDocument
 
endcase 'tdEditDeleteLayer
'--------------------------------------------------------
testcase tEditObjectEdit

    Dim Schrieb  as string

    Schrieb = gOLEWriter
    if Schrieb = "" then
        warnlog " the OLE is not defined :-((( gOLEWriter: " + iSprache
    else
        printlog " new document"
        Call hNewDocument
        call sSelectEmptyLayout
        sleep 1
        printlog " insert writer ole object"
        InsertObjectOLEObject             
        Kontext "OLEObjektEinfuegen"
        sleep 3
        if ObjektTyp.GetItemCount = 0 Then
            Warnlog "- No available Ole-entry in the list, maybe an error in the Install.ini?"
            sleep 1
            OleObjektEinfuegen.Cancel
            sleep 1
        else
            ObjektTyp.Select Schrieb
            sleep 1
            OLEObjektEinfuegen.OK
            sleep 3
            gMouseMove  10,10,90,90
            sleep 1
            EditSelectAll

            try
                EditObjectEdit
                sleep 2
            catch
                Warnlog "-  The EditObjectEdit did not work"
            endcatch


            gMouseClick 90,90
        end if
        sleep 1
        printlog " close document"
        Call hCloseDocument
    endif
endcase 'tEditObjectEdit