'encoding UTF-8 Do not remove or change this line! '************************************************************************* ' ' Licensed to the Apache Software Foundation (ASF) under one ' or more contributor license agreements. See the NOTICE file ' distributed with this work for additional information ' regarding copyright ownership. The ASF licenses this file ' to you under the Apache License, Version 2.0 (the ' "License"); you may not use this file except in compliance ' with the License. You may obtain a copy of the License at ' ' http://www.apache.org/licenses/LICENSE-2.0 ' ' Unless required by applicable law or agreed to in writing, ' software distributed under the License is distributed on an ' "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY ' KIND, either express or implied. See the License for the ' specific language governing permissions and limitations ' under the License. ' '************************************************************************* '* '* short description : Property Browser '* '\*********************************************************************** sub ctrl_PropertyBrowser call tPushButton call tTextBox call tListBox call tComboBox call tImageButton call tImageControl call tForms end sub '-------------------------------------------------------------------------------------- testcase tPushButton call sCloseAllToolbars '/// Open a new document printlog "Open a new document" call hNewDocument Kontext "DocumentWriter" DocumentWriter.TypeKeys "tt_doc" , true sleep(1) call hToolbarSelect("FormControls",true) Kontext "FormControls" PushButton.Click sleep(1) '/// insert a Push Button printlog "insert a Push Button" call hDrawingWithSelection ( 50, 20, 60, 30 ) sleep(2) Kontext "FormControls" ControlProperties.Click sleep(2) '/// change Buttontype to URL printlog "change Buttontype to URL" Kontext "TabGeneralControl" fsetControlProperty("PushButton","ButtonType", "4") '/// check if the URLField property is enabled printlog "check if the URLField property is enabled" if NOT URL.isEnabled then warnlog "The URL fields doesn't gets enabled" end if '/// add url to URLField printlog "add url to URLField" fsetControlProperty("PushButton","URL", "http://www.sun.com") Kontext "TabGeneralControl" TabGeneralControl.typekeys("",true) '/// check if the Frame property is enabled printlog "check if the Frame property is enabled" if NOT Frame.isEnabled then warnlog "The Frame fields doesn't gets enabled" end if sleep(1) '/// add graphicfile to URLField printlog "add graphicfile to URLField" fsetControlProperty("PushButton","Graphics", gOfficePath + ConvertPath("share/gallery/bullets/blkpearl.gif")) '/// check if the GraphicsAlignment property is enabled printlog "check if the GraphicsAlignment property is enabled" if NOT GraphicsAlignment.isEnabled then warnlog "The GraphicsAlignment doesn't gets enabled" end if '/// close the controlproperty browser Kontext "ControlPropertiesDialog" ControlPropertiesDialog.close sleep(1) hCloseDocument endcase '-------------------------------------------------------------------------------------- testcase tTextBox call sCloseAllToolbars '/// Open a new document, printlog "Open a new document," call hNewDocument Kontext "DocumentWriter" DocumentWriter.TypeKeys "tt_doc" , true sleep(1) call hToolbarSelect("FormControls",true) Kontext "FormControls" Edit.Click sleep(1) '/// insert a text box printlog "insert a text box" call hDrawingWithSelection ( 50, 20, 60, 30 sleep(2) Kontext "FormControls" ControlProperties.Click sleep(2) '/// change the propety multiline to yes printlog "change the propety multiline to yes" fsetControlProperty("TextBox","TextType","2") '/// check if the scrollbars property is enabled printlog "check if the scrollbars property is enabled" if NOT Scrollbars.isEnabled then warnlog "The scrollbars doesn't gets enabled" end if '/// check if the password char is enabled printlog "check if the password char is enabled" if Password.isEnabled then warnlog "The pasword is enabled ( issue 29477 ) " end if '/// change the propety multiline to no printlog "change the propety multiline to no" fsetControlProperty("TextBox","TextType","1") '/// check if the scrollbars property is disabled printlog "check if the scrollbars property is disabled" if Scrollbars.isEnabled then warnlog "The scrollbars is enabled" end if '/// check if the password char is disabled printlog "check if the password char is disabled" if NOT Password.isEnabled then warnlog "The pasword doesn't gets enabled" end if '/// close the controlproperty browser Kontext "ControlPropertiesDialog" ControlPropertiesDialog.close '/// close the document printlog "close the document" sleep(1) hCloseDocument endcase '-------------------------------------------------------------------------------------- testcase tListBox call sCloseAllToolbars '/// Open a new document, printlog "Open a new document," call hNewDocument Kontext "DocumentWriter" DocumentWriter.TypeKeys "tt_doc" , true sleep(1) call hToolbarSelect("FormControls",true) Kontext "FormControls" ListBox.Click sleep(1) UseWizards.Click sleep(1) '/// insert a list box printlog "insert a list box" call hDrawingWithSelection ( 50, 20, 60, 30 sleep(2) Kontext "FormControls" ControlProperties.Click sleep(2) '/// change the property DropDown to yes printlog "change the propety multiline to yes" fsetControlProperty("ListBox","DropDown","2") '/// check if the scrollbars property is enabled printlog "check if the LineCount property is enabled" if NOT LineCount.isEnabled then warnlog "The LineCount doesn't gets enabled" end if '/// change the propety multiline to no printlog "change the propety multiline to no" fsetControlProperty("ListBox","DropDown","1") '/// check if the scrollbars property is disabled printlog "check if the LineCount property is disabled" if LineCount.isEnabled then warnlog "The LineCount is enabled" end if Kontext "FormControls" UseWizards.Click '/// close the controlproperty browser Kontext "ControlPropertiesDialog" ControlPropertiesDialog.close '/// close the document printlog "close the document" sleep(1) hCloseDocument endcase '-------------------------------------------------------------------------------------- testcase tComboBox call sCloseAllToolbars '/// Open a new document, printlog "Open a new document," call hNewDocument Kontext "DocumentWriter" DocumentWriter.TypeKeys "tt_doc" , true sleep(1) call hToolbarSelect("FormControls",true) Kontext "FormControls" ComboBox.Click sleep(1) UseWizards.Click sleep(1) '/// insert a list box printlog "insert a list box" call hDrawingWithSelection ( 50, 20, 60, 30 sleep(2) Kontext "FormControls" ControlProperties.Click sleep(2) '/// change the property DropDown to yes printlog "change the propety multiline to yes" fsetControlProperty("ComboBox","DropDown","2") '/// check if the scrollbars property is enabled printlog "check if the LineCount property is enabled" if NOT LineCount.isEnabled then warnlog "The LineCount doesn't gets enabled" end if '/// change the propety multiline to no printlog "change the propety multiline to no" fsetControlProperty("ComboBox","DropDown","1") '/// check if the scrollbars property is disabled printlog "check if the LineCount property is disabled" if LineCount.isEnabled then warnlog "The LineCount is enabled" end if Kontext "FormControls" UseWizards.Click '/// close the controlproperty browser Kontext "ControlPropertiesDialog" ControlPropertiesDialog.close '/// close the document printlog "close the document" sleep(1) hCloseDocument endcase '-------------------------------------------------------------------------------------- testcase tImageButton call sCloseAllToolbars '/// Open a new document, printlog "Open a new document," call hNewDocument Kontext "DocumentWriter" DocumentWriter.TypeKeys "tt_doc" , true sleep(1) call hToolbarSelect("MoreControls",true) Kontext "MoreControls" Imagebutton.Click sleep(1) '/// insert an image control printlog "insert an image control" call hDrawingWithSelection ( 50, 20, 60, 30 sleep(2) call hToolbarSelect("FormControls",true) Kontext "FormControls" ControlProperties.Click sleep(2) '/// change the property ButtonType to URL fsetControlProperty("ImagesButton","ButtonType", "4") '/// check if the URL property is enabled if NOT URL.isEnabled then warnlog "The URL fields doesn't gets enabled" end if '/// add url to URLField printlog "add url to URLField" 'ISSUE: see i29478 'fsetControlProperty("ImagesButton","URL", "www.sun.com") fsetControlProperty("ImagesButton","URL", "http://www.sun.com") Kontext "TabGeneralControl" TabGeneralControl.typekeys("",true) '/// check if the Frame property is enabled printlog "check if the Frame property is enabled" if NOT Frame.isEnabled then warnlog "The Frame fields doesn't gets enabled" end if sleep(1) '/// add graphicfile to GraphicField fsetControlProperty("ImagesButton","Graphics", gOfficePath + ConvertPath("share/gallery/bullets/blkpearl.gif")) '/// check if the GraphicsAlignment property is enabled printlog "check if the Scale property is enabled" if NOT Scale.isEnabled then warnlog "The Scale doesn't gets enabled" end if '/// close the controlproperty browser Kontext "ControlPropertiesDialog" ControlPropertiesDialog.close sleep(1) hCloseDocument endcase '-------------------------------------------------------------------------------------- testcase tImageControl call sCloseAllToolbars '/// Open a new document, printlog "Open a new document," call hNewDocument Kontext "DocumentWriter" DocumentWriter.TypeKeys "tt_doc" , true sleep(1) call hToolbarSelect("MoreControls",true) Kontext "MoreControls" ImageControl.Click sleep(1) '/// insert an image control printlog "insert an image control" call hDrawingWithSelection ( 50, 20, 60, 30 sleep(2) call hToolbarSelect("FormControls",true) Kontext "FormControls" ControlProperties.Click sleep(2) '/// add graphicfile to GraphicField printlog "add graphicfile to GraphicField" fsetControlProperty("ImagesButton","Graphics", gOfficePath + ConvertPath("share/gallery/bullets/blkpearl.gif")) '/// check if the Scale property is enabled printlog "check if the Scale property is enabled" if NOT Scale.isEnabled then warnlog "The Scale doesn't gets enabled" end if '/// close the controlproperty browser Kontext "ControlPropertiesDialog" ControlPropertiesDialog.close sleep(1) hCloseDocument endcase '-------------------------------------------------------------------------------------- testcase tForms call sCloseAllToolbars '/// Open a new document, printlog "Open a new document," call hNewDocument Kontext "DocumentWriter" DocumentWriter.TypeKeys "tt_doc" , true sleep(1) call hToolbarSelect("FormControls",true) Kontext "FormControls" PushButton.Click sleep(1) '/// insert a Push Button printlog "insert a Push Button" call hDrawingWithSelection ( 50, 20, 60, 30 sleep(2) Kontext "FormControls" FormProperties.Click sleep(2) Kontext "FormPropertiesDialog" FormPropertiesTabControl.setPage TabGeneralForm Kontext "TabGeneralForm" '/// set encoding to Multipart printlog "set encoding to Multipart" Encoding.select 2 sleep(1) '/// check if the SubmitMethod get enabled printlog "check if the SubmitMethod get enabled" if SubmitMethod.isEnabled then warnlog "The SubmitMethod fields doesn't gets enabled" end if '/// set encoding to URL printlog "set encoding to URL" Encoding.select 1 sleep(1) '/// check if the SubmitMethod get disabled printlog "check if the SubmitMethod get disabled" if NOT SubmitMethod.isEnabled then warnlog "The SubmitMethod fields doesn't gets disabled" end if '/// set URL printlog "set URL" 'ISSUE: see i29478 'URL.setText("www.sun.com") URL.setText("http://www.sun.com") TabGeneralForm.TypeKeys("") '/// check if the frame property gets enabled printlog "check if the frame property gets enabled" if NOT Frame.isEnabled then warnlog "The frame fields doesn't gets enabled" end if Kontext "FormPropertiesDialog" FormPropertiesTabControl.setPage TabDataForm Kontext "TabDataForm" '/// select first datasource printlog "select first datasource" DataSource.select 1 sleep(2) '/// select SQL Command as Type printlog "select SQL Command as Type" ContentType.select 3 sleep(2) '/// check if the SQL Design button gets enabled printlog "check if the SQL Design button gets enabled" if OpenQueryDesign.isenabled then '/// open the query design with the button printlog "open the query design with the button" OpenQueryDesign.click sleep(5) '/// check if the querydesign open printlog "check if the querydesign open" Kontext "QueryDesignTable" if NOT QueryDesignTable.exists(3) then warnlog "The Query Design doesn't open." end if Kontext "AddTables" AddTables.Close Kontext "QueryDesignTable" QueryDesignTable.UseMenu hMenuSelectNr(1) hMenuSelectNr(4) else warnlog "the openQueryDesign button is not enabled" end if Kontext "TabDataForm" printlog "select table as Type" ContentType.select 1 sleep(1) Content.setText("biblio") sleep(1) TabDataForm.TypeKeys "" , true '/// close the FormProperty Browser printlog "close the FormProperty Browser" Kontext "ControlPropertiesDialog" ControlPropertiesDialog.close '/// open the form property browser printlog "open the form property browser" Kontext "FormControls" FormProperties.Click sleep(2) Kontext "FormPropertiesDialog" FormPropertiesTabControl.setPage TabDataForm '/// click on the filter button Kontext "TabDataForm" FilterDLGButton.Click '/// check if the filter dialog appear Kontext "FilterDialog" FilterDialog.OK '/// click on the sort button Kontext "TabDataForm" SortDLGButton.click '/// check if the sort dialog appear Kontext "SortOrder" SortOrder.OK '/// close the controlproperty browser Kontext "ControlPropertiesDialog" ControlPropertiesDialog.close sleep(1) hCloseDocument endcase