pmd:aggregate-pmd-no-fork

Note:This goal should be used as a Maven report.

Full name:

org.apache.maven.plugins:maven-pmd-plugin:3.21.2:aggregate-pmd-no-fork

Description:

Creates a PMD site report in an aggregator project without forking the test-compile phase again.

Attributes:

  • Requires a Maven project to be executed.
  • Executes as an aggregator goal.
  • Requires dependency resolution of artifacts in scope: test.
  • The goal is thread-safe and supports parallel builds.
  • Since version: 3.15.0.

Required Parameters

Name Type Since Description
<targetDirectory> File - The output directory for the intermediate XML report.
User property is: project.build.directory.

Optional Parameters

Name Type Since Description
<aggregate> boolean 2.2 Deprecated. Whether to build an aggregated report at the root, or build individual reports.
Default value is: false.
User property is: aggregate.
<analysisCache> boolean 3.8 Enables the analysis cache, which speeds up PMD. This requires a cache file, that contains the results of the last PMD run. Thus the cache is only effective, if this file is not cleaned between runs.
Default value is: false.
User property is: pmd.analysisCache.
<analysisCacheLocation> String 3.8 The location of the analysis cache, if it is enabled. This file contains the results of the last PMD run and must not be cleaned between consecutive PMD runs. Otherwise the cache is not in use. If the file doesn't exist, PMD executes as if there is no cache enabled and all files are analyzed. Otherwise only changed files will be analyzed again.
Default value is: ${project.build.directory}/pmd/pmd.cache.
User property is: pmd.analysisCacheLocation.
<benchmark> boolean 3.1 Controls whether PMD will track benchmark information.
Default value is: false.
User property is: pmd.benchmark.
<benchmarkOutputFilename> String 3.1 Benchmark output filename.
Default value is: ${project.build.directory}/pmd-benchmark.txt.
User property is: pmd.benchmarkOutputFilename.
<compileSourceRoots> List<String> 3.7 Specifies the location of the source directories to be used for PMD. Defaults to project.compileSourceRoots.
Default value is: ${project.compileSourceRoots}.
<excludeFromFailureFile> String 3.7 File that lists classes and rules to be excluded from failures. For PMD, this is a properties file. For CPD, this is a text file that contains comma-separated lists of classes that are allowed to duplicate.
User property is: pmd.excludeFromFailureFile.
<excludeRoots> File[] 2.2 The project source directories that should be excluded.
<excludes> List<String> 2.2 A list of files to exclude from checking. Can contain Ant-style wildcards and double wildcards. Note that these exclusion patterns only operate on the path of a source file relative to its source root directory. In other words, files are excluded based on their package and/or class name. If you want to exclude entire source root directories, use the parameter excludeRoots instead.
<format> String - Set the output format type, in addition to the HTML report. Must be one of: "none", "csv", "xml", "txt" or the full class name of the PMD renderer to use. See the net.sourceforge.pmd.renderers package javadoc for available renderers. XML is produced in any case, since this format is needed for the check goals (pmd:check, pmd:aggregator-check, pmd:cpd-check, pmd:aggregator-cpd-check).
Default value is: xml.
User property is: format.
<includes> List<String> 2.2 A list of files to include from checking. Can contain Ant-style wildcards and double wildcards. Defaults to **\/*.java.
<includeTests> boolean 2.2 Run PMD on the tests.
Default value is: false.
<includeXmlInSite> boolean 3.0 Whether to include the xml files generated by PMD/CPD in the site.
Default value is: false.
<jdkToolchain> Map<String,String> 3.14.0

Allow for configuration of the jvm used to run PMD via maven toolchains. This permits a configuration where the project is built with one jvm and PMD is executed with another. This overrules the toolchain selected by the maven-toolchain-plugin.

Examples:

(see Guide to Toolchains for more info)

   <configuration>
       ...
       <jdkToolchain>
           <version>1.11</version>
       </jdkToolchain>
   </configuration>

   <configuration>
       ...
       <jdkToolchain>
           <version>1.8</version>
           <vendor>zulu</vendor>
       </jdkToolchain>
   </configuration>
   
note: requires at least Maven 3.3.1
<language> String 3.0 The programming language to be analyzed by PMD. Valid values are currently java, javascript and jsp.
Default value is: java.
<linkXRef> boolean - Link the violation line numbers to the source xref. Links will be created automatically if the jxr plugin is being used.
Default value is: true.
User property is: linkXRef.
<minimumPriority> int 2.1 The rule priority threshold; rules with lower priority than this will not be evaluated.
Default value is: 5.
User property is: minimumPriority.
<renderProcessingErrors> boolean 3.9.0 Also render processing errors into the HTML report. Processing errors are problems, that PMD encountered while executing the rules. It can be parsing errors or exceptions during rule execution. Processing errors indicate a bug in PMD and the information provided help in reporting and fixing bugs in PMD.
Default value is: true.
User property is: pmd.renderProcessingErrors.
<renderRuleViolationPriority> boolean 3.10.0 Also render the rule priority into the HTML report.
Default value is: true.
User property is: pmd.renderRuleViolationPriority.
<renderSuppressedViolations> boolean 3.17.0 Add a section in the HTML report that lists the suppressed violations.
Default value is: true.
User property is: pmd.renderSuppressedViolations.
<renderViolationsByPriority> boolean 3.12.0 Add a section in the HTML report, that groups the found violations by rule priority in addition to grouping by file.
Default value is: true.
User property is: pmd.renderViolationsByPriority.
<rulesets> String[] - The PMD rulesets to use. See the Stock Java Rulesets for a list of available rules. Defaults to a custom ruleset provided by this maven plugin (/rulesets/java/maven-pmd-plugin-default.xml).
<rulesetsTargetDirectory> File 3.13.0 Before PMD is executed, the configured rulesets are resolved and copied into this directory.

Note: Before 3.13.0, this was by default ${project.build.directory}.


Default value is: ${project.build.directory}/pmd/rulesets.
User property is: pmd.rulesetsTargetDirectory.
<showPmdLog> boolean 3.9.0 Redirect PMD log into maven log out. When enabled, the PMD log output is redirected to maven, so that it is visible in the console together with all the other log output. Also, if maven is started with the debug flag (-X or --debug), the PMD logger is also configured for debug.
Default value is: true.
User property is: pmd.showPmdLog.
<skip> boolean 2.1 Skip the PMD report generation. Most useful on the command line via "-Dpmd.skip=true".
Default value is: false.
User property is: pmd.skip.
<skipEmptyReport> boolean 3.1 Skip the PMD/CPD report generation if there are no violations or duplications found. Defaults to false.

Note: the default value was changed from true to false with version 3.13.0.


Default value is: false.
<skipPmdError> boolean 3.1 per default pmd executions error are ignored to not break the whole
Default value is: true.
User property is: pmd.skipPmdError.
<suppressMarker> String 3.4 Source level marker used to indicate whether a RuleViolation should be suppressed. If it is not set, PMD's default will be used, which is NOPMD. See also PMD – Suppressing warnings.
User property is: pmd.suppressMarker.
<targetJdk> String - The target JDK to analyze based on. Should match the source used in the compiler plugin. Valid values with the default PMD version are currently 1.3, 1.4, 1.5, 1.6, 1.7, 1.8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, and 20.

You can override the default PMD version by specifying PMD as a dependency, see Upgrading PMD at Runtime.

Note: this parameter is only used if the language parameter is set to java.


Default value is: ${maven.compiler.source}.
User property is: targetJdk.
<testSourceRoots> List<String> 3.7 The directories containing the test-sources to be used for PMD. Defaults to project.testCompileSourceRoots
Default value is: ${project.testCompileSourceRoots}.
<typeResolution> boolean 3.0 Controls whether the project's compile/test classpath should be passed to PMD to enable its type resolution feature.
Default value is: true.
User property is: pmd.typeResolution.
<xrefLocation> File - Location of the Xrefs to link to.
Default value is: ${project.reporting.outputDirectory}/xref.
<xrefTestLocation> File - Location of the Test Xrefs to link to.
Default value is: ${project.reporting.outputDirectory}/xref-test.

Parameter Details

<aggregate>

Deprecated. since 3.15.0 Use the goals pmd:aggregate-pmd and pmd:aggregate-cpd instead.
Whether to build an aggregated report at the root, or build individual reports.
  • Type: boolean
  • Since: 2.2
  • Required: No
  • User Property: aggregate
  • Default: false

<analysisCache>

Enables the analysis cache, which speeds up PMD. This requires a cache file, that contains the results of the last PMD run. Thus the cache is only effective, if this file is not cleaned between runs.
  • Type: boolean
  • Since: 3.8
  • Required: No
  • User Property: pmd.analysisCache
  • Default: false

<analysisCacheLocation>

The location of the analysis cache, if it is enabled. This file contains the results of the last PMD run and must not be cleaned between consecutive PMD runs. Otherwise the cache is not in use. If the file doesn't exist, PMD executes as if there is no cache enabled and all files are analyzed. Otherwise only changed files will be analyzed again.
  • Type: java.lang.String
  • Since: 3.8
  • Required: No
  • User Property: pmd.analysisCacheLocation
  • Default: ${project.build.directory}/pmd/pmd.cache

<benchmark>

Controls whether PMD will track benchmark information.
  • Type: boolean
  • Since: 3.1
  • Required: No
  • User Property: pmd.benchmark
  • Default: false

<benchmarkOutputFilename>

Benchmark output filename.
  • Type: java.lang.String
  • Since: 3.1
  • Required: No
  • User Property: pmd.benchmarkOutputFilename
  • Default: ${project.build.directory}/pmd-benchmark.txt

<compileSourceRoots>

Specifies the location of the source directories to be used for PMD. Defaults to project.compileSourceRoots.
  • Type: java.util.List<java.lang.String>
  • Since: 3.7
  • Required: No
  • Default: ${project.compileSourceRoots}

<excludeFromFailureFile>

File that lists classes and rules to be excluded from failures. For PMD, this is a properties file. For CPD, this is a text file that contains comma-separated lists of classes that are allowed to duplicate.
  • Type: java.lang.String
  • Since: 3.7
  • Required: No
  • User Property: pmd.excludeFromFailureFile

<excludeRoots>

The project source directories that should be excluded.
  • Type: java.io.File[]
  • Since: 2.2
  • Required: No

<excludes>

A list of files to exclude from checking. Can contain Ant-style wildcards and double wildcards. Note that these exclusion patterns only operate on the path of a source file relative to its source root directory. In other words, files are excluded based on their package and/or class name. If you want to exclude entire source root directories, use the parameter excludeRoots instead.
  • Type: java.util.List<java.lang.String>
  • Since: 2.2
  • Required: No

<format>

Set the output format type, in addition to the HTML report. Must be one of: "none", "csv", "xml", "txt" or the full class name of the PMD renderer to use. See the net.sourceforge.pmd.renderers package javadoc for available renderers. XML is produced in any case, since this format is needed for the check goals (pmd:check, pmd:aggregator-check, pmd:cpd-check, pmd:aggregator-cpd-check).
  • Type: java.lang.String
  • Required: No
  • User Property: format
  • Default: xml

<includes>

A list of files to include from checking. Can contain Ant-style wildcards and double wildcards. Defaults to **\/*.java.
  • Type: java.util.List<java.lang.String>
  • Since: 2.2
  • Required: No

<includeTests>

Run PMD on the tests.
  • Type: boolean
  • Since: 2.2
  • Required: No
  • Default: false

<includeXmlInSite>

Whether to include the xml files generated by PMD/CPD in the site.
  • Type: boolean
  • Since: 3.0
  • Required: No
  • Default: false

<jdkToolchain>

Allow for configuration of the jvm used to run PMD via maven toolchains. This permits a configuration where the project is built with one jvm and PMD is executed with another. This overrules the toolchain selected by the maven-toolchain-plugin.

Examples:

(see Guide to Toolchains for more info)

   <configuration>
       ...
       <jdkToolchain>
           <version>1.11</version>
       </jdkToolchain>
   </configuration>

   <configuration>
       ...
       <jdkToolchain>
           <version>1.8</version>
           <vendor>zulu</vendor>
       </jdkToolchain>
   </configuration>
   
note: requires at least Maven 3.3.1
  • Type: java.util.Map<java.lang.String, java.lang.String>
  • Since: 3.14.0
  • Required: No

<language>

The programming language to be analyzed by PMD. Valid values are currently java, javascript and jsp.
  • Type: java.lang.String
  • Since: 3.0
  • Required: No
  • Default: java

<linkXRef>

Link the violation line numbers to the source xref. Links will be created automatically if the jxr plugin is being used.
  • Type: boolean
  • Required: No
  • User Property: linkXRef
  • Default: true

<minimumPriority>

The rule priority threshold; rules with lower priority than this will not be evaluated.
  • Type: int
  • Since: 2.1
  • Required: No
  • User Property: minimumPriority
  • Default: 5

<renderProcessingErrors>

Also render processing errors into the HTML report. Processing errors are problems, that PMD encountered while executing the rules. It can be parsing errors or exceptions during rule execution. Processing errors indicate a bug in PMD and the information provided help in reporting and fixing bugs in PMD.
  • Type: boolean
  • Since: 3.9.0
  • Required: No
  • User Property: pmd.renderProcessingErrors
  • Default: true

<renderRuleViolationPriority>

Also render the rule priority into the HTML report.
  • Type: boolean
  • Since: 3.10.0
  • Required: No
  • User Property: pmd.renderRuleViolationPriority
  • Default: true

<renderSuppressedViolations>

Add a section in the HTML report that lists the suppressed violations.
  • Type: boolean
  • Since: 3.17.0
  • Required: No
  • User Property: pmd.renderSuppressedViolations
  • Default: true

<renderViolationsByPriority>

Add a section in the HTML report, that groups the found violations by rule priority in addition to grouping by file.
  • Type: boolean
  • Since: 3.12.0
  • Required: No
  • User Property: pmd.renderViolationsByPriority
  • Default: true

<rulesets>

The PMD rulesets to use. See the Stock Java Rulesets for a list of available rules. Defaults to a custom ruleset provided by this maven plugin (/rulesets/java/maven-pmd-plugin-default.xml).
  • Type: java.lang.String[]
  • Required: No

<rulesetsTargetDirectory>

Before PMD is executed, the configured rulesets are resolved and copied into this directory.

Note: Before 3.13.0, this was by default ${project.build.directory}.

  • Type: java.io.File
  • Since: 3.13.0
  • Required: No
  • User Property: pmd.rulesetsTargetDirectory
  • Default: ${project.build.directory}/pmd/rulesets

<showPmdLog>

Redirect PMD log into maven log out. When enabled, the PMD log output is redirected to maven, so that it is visible in the console together with all the other log output. Also, if maven is started with the debug flag (-X or --debug), the PMD logger is also configured for debug.
  • Type: boolean
  • Since: 3.9.0
  • Required: No
  • User Property: pmd.showPmdLog
  • Default: true

<skip>

Skip the PMD report generation. Most useful on the command line via "-Dpmd.skip=true".
  • Type: boolean
  • Since: 2.1
  • Required: No
  • User Property: pmd.skip
  • Default: false

<skipEmptyReport>

Skip the PMD/CPD report generation if there are no violations or duplications found. Defaults to false.

Note: the default value was changed from true to false with version 3.13.0.

  • Type: boolean
  • Since: 3.1
  • Required: No
  • Default: false

<skipPmdError>

per default pmd executions error are ignored to not break the whole
  • Type: boolean
  • Since: 3.1
  • Required: No
  • User Property: pmd.skipPmdError
  • Default: true

<suppressMarker>

Source level marker used to indicate whether a RuleViolation should be suppressed. If it is not set, PMD's default will be used, which is NOPMD. See also PMD – Suppressing warnings.
  • Type: java.lang.String
  • Since: 3.4
  • Required: No
  • User Property: pmd.suppressMarker

<targetDirectory>

The output directory for the intermediate XML report.
  • Type: java.io.File
  • Required: Yes
  • User Property: project.build.directory

<targetJdk>

The target JDK to analyze based on. Should match the source used in the compiler plugin. Valid values with the default PMD version are currently 1.3, 1.4, 1.5, 1.6, 1.7, 1.8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, and 20.

You can override the default PMD version by specifying PMD as a dependency, see Upgrading PMD at Runtime.

Note: this parameter is only used if the language parameter is set to java.

  • Type: java.lang.String
  • Required: No
  • User Property: targetJdk
  • Default: ${maven.compiler.source}

<testSourceRoots>

The directories containing the test-sources to be used for PMD. Defaults to project.testCompileSourceRoots
  • Type: java.util.List<java.lang.String>
  • Since: 3.7
  • Required: No
  • Default: ${project.testCompileSourceRoots}

<typeResolution>

Controls whether the project's compile/test classpath should be passed to PMD to enable its type resolution feature.
  • Type: boolean
  • Since: 3.0
  • Required: No
  • User Property: pmd.typeResolution
  • Default: true

<xrefLocation>

Location of the Xrefs to link to.
  • Type: java.io.File
  • Required: No
  • Default: ${project.reporting.outputDirectory}/xref

<xrefTestLocation>

Location of the Test Xrefs to link to.
  • Type: java.io.File
  • Required: No
  • Default: ${project.reporting.outputDirectory}/xref-test