# Licensed to the Apache Software Foundation (ASF) under one or more # contributor license agreements. See the NOTICE file distributed with # this work for additional information regarding copyright ownership. # The ASF licenses this file to You under the Apache License, Version 2.0 # (the "License"); you may not use this file except in compliance with # the License. You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # Directory org/apache/derby/tools # From JDBCDisplayUtil.java UT_Error0=\ (errorCode = {0}) UT_NoSqlst=(no SQLState) UT_NoMessa=(no message) UT_Error012=ERROR {0}: {1}{2} UT_NoSqlst_7=(no SQLState) UT_NoMessa_8=(no message) UT_Warni01=WARNING {0}: {1} UT_1RowInserUpdatDelet=1 row inserted/updated/deleted UT_0RowsInserUpdatDelet={0} rows inserted/updated/deleted UT_StateExecu=Statement executed. UT_0RowsSelec={0} rows selected UT_1RowSelec=1 row selected UT_Resul0=+ ResultSet #{0} + UT_JDBCDisplayUtil_16=++++++++++++++++ UT_JDBCDisplayUtil_17=+ UT_NoCurreRow=No current row UT_NoCurreRow_19=No current row UT_Resul0_20=ResultSet #{0} # Directory org/apache/derby/impl/tools/ij # From Main.java IJ_IjErroResoNo=IJ ERROR: resource not found: {0} IJ_IjErroFileNo=IJ ERROR: file not found: {0} IJ_IjErroUnabTo=IJ ERROR: unable to reset output to: {0} IJ_IjErroMaxiVa=IJ ERROR: maximumDisplayWidth value {0} is not a value integer. # From ij.jj IJ_Pass=PASS IJ_Fail=FAIL IJ_Unx=\ **** UNX IJ_NoConneAvail=No connections available. IJ_CurreConne=* = current connection IJ_NoCurreConne=No current connection IJ_TestsRun0Pass12Fail34=Tests run: {0} pass: {1} ({2}%) fail: {3} ({4}%) IJ_UnexpResulUnx01=***** UNEXPECTED RESULTS, unx: {0} ({1}%) ***** IJ_HelpText=\ \ \n\ \ Supported commands include:\n\ \ \n\ \ PROTOCOL ''JDBC protocol'' [ AS ident ];\n\ \ -- sets a default or named protocol\n\ \ DRIVER ''class for driver''; -- loads the named class\n\ \ CONNECT ''url for database'' [ PROTOCOL namedProtocol ] [ AS connectionName ];\n\ \ -- connects to database URL\n\ \ -- and may assign identifier\n\ \ SET CONNECTION connectionName; -- switches to the specified connection\n\ \ SHOW CONNECTIONS; -- lists all connections\n\ \ AUTOCOMMIT [ ON | OFF ]; -- sets autocommit mode for the connection\n\ \ DISCONNECT [ CURRENT | connectionName | ALL ];\n\ \ -- drop current, named, or all connections;\n\ \ -- the default is CURRENT\n\ \ \n\ \ SHOW SCHEMAS; -- lists all schemas in the current database\n\ \ SHOW [ TABLES | VIEWS | PROCEDURES | FUNCTIONS | SYNONYMS ] '{' IN schema '}';\n\ \ -- lists tables, views, procedures, functions or synonyms\n\ \ SHOW INDEXES '{' IN schema | FROM table '}';\n\ \ -- lists indexes in a schema, or for a table\n\ \ SHOW ROLES; -- lists all defined roles in the database,\n\ \ -- sorted\n\ \ SHOW ENABLED_ROLES; -- lists the enabled roles for the current\n\ \ -- connection (to see current role use\n\ \ -- VALUES CURRENT_ROLE), sorted\n\ \ SHOW SETTABLE_ROLES; -- lists the roles which can be set for the\n\ \ -- current connection, sorted\n\ \ DESCRIBE name; -- lists columns in the named table\n\ \ \n\ \ COMMIT; -- commits the current transaction\n\ \ ROLLBACK; -- rolls back the current transaction\n\ \ \n\ \ PREPARE name AS ''SQL-J text''; -- prepares the SQL-J text\n\ \ EXECUTE '{' name | ''SQL-J text'' '}' [ USING '{' name | ''SQL-J text'' '}' ] ;\n\ \ -- executes the statement with parameter\n\ \ -- values from the USING result set row\n\ \ REMOVE name; -- removes the named previously prepared statement\n\ \ \n\ \ RUN ''filename''; -- run commands from the named file\n\ \ \n\ \ ELAPSEDTIME [ ON | OFF ]; -- sets elapsed time mode for ij\n\ \ MAXIMUMDISPLAYWIDTH integerValue;\n\ \ -- sets the maximum display width for\n\ \ -- each column to integerValue\n\ \ \n\ \ ASYNC name ''SQL-J text''; -- run the command in another thread\n\ \ WAIT FOR name; -- wait for result of ASYNC''d command\n\ \ \n\ \ GET [SCROLL INSENSITIVE] [WITH '{HOLD | NOHOLD}'] CURSOR name AS ''SQL-J query'';\n\ \ -- gets a cursor (JDBC result set) on the query\n\ \ -- the default is a forward-only cursor with holdability\n\ \ NEXT name; -- gets the next row from the named cursor\n\ \ FIRST name; -- gets the first row from the named scroll cursor\n\ \ LAST name; -- gets the last row from the named scroll cursor\n\ \ PREVIOUS name; -- gets the previous row from the named scroll cursor\n\ \ ABSOLUTE integer name; -- positions the named scroll cursor at the absolute row number\n\ \ -- (A negative number denotes position from the last row.) \n\ \ RELATIVE integer name; -- positions the named scroll cursor relative to the current row\n\ \ -- (integer is number of rows)\n\ \ AFTER LAST name; -- positions the named scroll cursor after the last row\n\ \ BEFORE FIRST name; -- positions the named scroll cursor before the first row\n\ \ GETCURRENTROWNUMBER name; -- returns the row number for the current position of the named scroll cursor\n\ \ -- (0 is returned when the cursor is not positioned on a row.) \n\ \ CLOSE name; -- closes the named cursor\n\ \ LOCALIZEDDISPLAY [ ON | OFF ];\n\ \ -- controls locale sensitive data representation\n\ \ \n\ \ EXIT; -- exits ij\n\ \ HELP; -- shows this message\n\ \ \n\ \ Any unrecognized commands are treated as potential SQL-J commands and executed directly.\n\ \ \n # From ijException.java IJ_IllegalStatementName={0} is an illegal name for a statement IJ_NotYetImpl=Not yet implemented IJ_AlreHaveACon=Already have a connection named {0} IJ_ExceRunnComm=Exception running command: {0} IJ_UnabToGetWar=Unable to get warnings for connection IJ_CoulNotLocaC=Could not locate class for procotol, {0} IJ_CoulNotLocaC_5=Could not locate class {0} IJ_FailToDisc=Failed to disconnect IJ_DrivNotClasN=Driver not class name {0} IJ_FileNotFoun=File not found IJ_CannotCloseInFile=Cannot close ij input file, {0} IJ_IsNotAlloOnA={0} is not allowed on a forward only cursor. IJ_GetcCallFail=getConnection call failed IJ_Ioex=IOException: {0} IJ_NeedToDiscFi=Need to disconnect first IJ_NoAsynStatEx=No async statement exists with the name {0} IJ_NoConnExisWi=No connection exists with the name {0} IJ_NoProtExisWi=No protocol exists with the name {0} IJ_NoSuchTable=No table exists with the name {0} IJ_IsOnlySuppIn={0} is only supported in JDBC 2.0 and greater. IJ_UsinClauHadN=Using clause had no results IJ_UnabToEsta=Unable to establish {0} IJ_UnabToGetWar_19=Unable to get warnings for result set IJ_ResoNotFoun=Resource not found IJ_ScroCursAre1=Scroll cursors are only supported with JDK1.2 and higher. IJ_UnabToGetWar_22=Unable to get warnings for statement IJ_WaitForStatI=Wait for statement interrupted: {0} IJ_0IsAnInvaVal=0 is an invalid value for ABSOLUTE IJ_NotAvailForDriver=command not available for this driver: {0} # From ijFatalException.java IJ_FataExceTerm=Fatal Exception; terminating IJ_Fata01=FatalException: {0}: {1} # From ijResultImpl.java IJ_Con0=CON::{0} IJ_Stm0=STM::{0} IJ_Row0=ROW::{0} IJ_Vec0=VEC::{0} IJ_Mul0=MUL::{0} IJ_Exc0=EXC::{0} IJ_MRS0=MRS::{0} IJ_Rse0=RST::{0} IJ_Unkn0=UNKNOWN::{0} # From util.java IJ_UsageJavaComCloudToolsIjPPropeInput=Usage: java org.apache.derby.tools.ij [-p propertyfile] [inputfile] IJ_IjWarniAutocMayCloseUsingResulSet=IJ WARNING: Autocommit may close using result set # From utilMain.java IJ_IjVers30C199=ij version {0} IJ_ElapTime0Mil=ELAPSED TIME = {0} milliseconds IJ_IjErro0=IJ ERROR: {0} IJ_JavaErro0=JAVA ERROR: {0} IJ_ElapTime0Mil_4=ELAPSED TIME = {0} milliseconds IJ_IjErro0_5=IJ ERROR: {0} IJ_IjErro0_6=IJ ERROR: {0} IJ_JavaErro0_7=JAVA ERROR: {0} IJ_Erro0=\ (errorCode = {0}) IJ_NoSqls=(no SQLState) IJ_NoMess=(no message) IJ_Erro012=ERROR {0}: {1}{2} # From xaHelper.java IJ_Reco0InDoubT=Recovered {0} in doubt transactions IJ_Tran01=Transaction {0} : {1} IJ_IlleValu=ILLEGAL VALUE IJ_01SeeLog={0} : {1} (see derby.log) IJ_Pool=PooledConnection IJ_XAClass=EmbeddedXADataSource not in classpath, please put derby.jar file in your classpath IJ_XANoI=EmbeddedXADataSource cannot be instantiated, please put derby.jar file in your classpath # From ParseException.java IJ_EncoAtLineColu=Encountered "{0}" at line {1}, column {2} # From TokenMgrError.java IJ_LexiErroAtLine0Colu1=Lexical error at line {0}, column {1}. Encountered: {2}after :"{3}" IJ_SuggestHelp=Issue the ''help'' command for general information on IJ command syntax.\nAny unrecognized commands are treated as potential SQL commands and executed directly.\nConsult your DBMS server reference documentation for details of the SQL syntax supported by your server. TL_incorCase=Case of the Derby attribute is incorrect. TL_unknownAtt=Attribute is unknown to Derby. TL_trueFalse=Value should be set to true/false. TL_dupAtt=Attribute is a duplicate. TL_urlLabel1=URL Attribute {0}{1}{2} # Directory org/apache/derby/tools # From dblook.java DBLOOK_MissingLocale=Resources not found for current locale; switching to {0}. DBLOOK_Usage=\ \ \n\ \ USAGE:\n\ java org.apache.derby.tools.dblook -d [OPTIONS]\n\n\ \ \twhere the source URL is the full URL, including the connection protocol\n\ \ \tand any connection attributes that might apply. For example, use\n\ \ \t''jdbc:derby:myDB'', or ''jdbc:derby://localhost:1527/myDB;user=usr;''. \n\n\ \ \toptions include: \n\n\ \ \t-z to specify a schema to which the DDL generation\n\ \ \t should be limited. Only database objects with that schema will have\n\ \ \t their DDL generated.\n\n\ \ \t-t ... to specify a list of tables for which\n\ \ \t the DDL will be generated; any tables not in the list will be ignored.\n\n\ \ \t-td to specify what should be appended to the end\n\ \ \t of each DDL statement.\n\t\tThis defaults to '';''.\n\n\ \ \t-noview to prevent the generation of DDL for views.\n\n\ \ \t-append to keep from overwriting the output files.\n\n\ \ \t-verbose to have error messages printed to the console (in addition\n\ \ \t to the log file). If not specified, errors will only be printed to the\n\ \ \t log file.\n\n\ \ \t-o to specify the file name to which the generated DDL\n\ \ \t will be written.\n\ \ \t\tIf not specified, default is the console.\ \ \n DBLOOK_FileCreation=This file was created using Derby''s dblook utility. DBLOOK_OutputLocation=Output will be sent to file {0}\n DBLOOK_Timestamp=Timestamp: {0} DBLOOK_DBName=Source database is: {0} DBLOOK_DBUrl=Connection URL is: {0} DBLOOK_TargetTables=The dblook utility will consider only specified tables. DBLOOK_TargetSchema=Specified schema is: {0} # Directory org/apache/derby/tools/impl/dblook DBLOOK_TablesHeader=DDL Statements for tables DBLOOK_ChecksHeader=DDL Statements for checks DBLOOK_IndexesHeader=DDL Statements for indexes DBLOOK_JarsHeader=DDL Statements for jars DBLOOK_KeysHeader=DDL Statements for keys DBLOOK_PrimUniqueHeader=primary/unique DBLOOK_ForeignHeader=foreign DBLOOK_FunctionHeader=DDL Statements for functions DBLOOK_SchemasHeader=DDL Statements for schemas DBLOOK_SequenceHeader=DDL Statements for sequences DBLOOK_StoredProcHeader=DDL Statements for stored procedures DBLOOK_SynonymHeader=DDL Statements for Synonyms DBLOOK_TriggersHeader=DDL Statements for triggers DBLOOK_UDTHeader=DDL Statements for user defined types DBLOOK_ViewsHeader=DDL Statements for views DBLOOK_TablePrivHeader=GRANT statements for tables DBLOOK_ColumnPrivHeader=GRANT statements for columns DBLOOK_RoutinePrivHeader=GRANT statements for routines DBLOOK_SequencePrivHeader=GRANT statements for sequences DBLOOK_UDTPrivHeader=GRANT statements for user defined types DBLOOK_Role_definitions_header=CREATE statements for roles DBLOOK_Role_grants_header=GRANT statements for roles DBLOOK_Jar_Note=\ **** NOTE **** In order for jar files to be loaded correctly,\n\ -- you must either 1) ensure that the DBJARS directory (created\n\ -- automatically by dblook) exists where it was created (i.e. at\n\ -- the path shown in the statements below), or else 2) change the\n\ -- path in the statements below to reflect the current location of\n\ -- DBJARS. If the DBJARS directory does not exist, or if it\n\ -- has been moved and the path is not correct, the following DDL\n\ -- statements will throw errors, and the jar files will NOT be\n\ -- loaded. DBLOOK_FailedToLoadJar=Failed to load jar file {0} DBLOOK_DefaultSchema=Reverting back to default schema ''APP'' DBLOOK_AtLeastOneDebug=\ -- Note: At least one unexpected error/warning message was\n\ -- encountered during DDL generation. See dblook.log\n\ -- to review the message(s).\n\ \n # Directory org/apache/derby/tools/iapi RUN_Usage=Usage:\n\ java -jar derbyrun.jar ij [-p propertiesfile] [sql script]\n\ java -jar derbyrun.jar sysinfo [-cp ...] [-cp help] \n\ java -jar derbyrun.jar dblook [args] (or no arguments for usage)\n\ java -jar derbyrun.jar server [args] (or no arguments for usage) # # Messages for SignatureChecker.java # SC_USAGE=Usage if running on J2SE:\n\ \ \n\ \ \tjava org.apache.derby.tools.SignatureChecker CONNECTION_URL_TO_DATABASE\n\ \ \n\ Usage if running on J2ME:\n\ \ \n\ \ \tjava org.apache.derby.tools.SignatureChecker DATABASE_NAME SC_NO_CONN=Could not get a connection. SC_FOUND_MATCH=Found a matching method for: {0} SC_UNRESOLVABLE=Unresolvable routine: {0}. Detailed reason: {1}