'encoding UTF-8 Do not remove or change this line!
'*************************************************************************
'
' Licensed to the Apache Software Foundation (ASF) under one
' or more contributor license agreements. See the NOTICE file
' distributed with this work for additional information
' regarding copyright ownership. The ASF licenses this file
' to you under the Apache License, Version 2.0 (the
' "License"); you may not use this file except in compliance
' with the License. You may obtain a copy of the License at
'
' http://www.apache.org/licenses/LICENSE-2.0
'
' Unless required by applicable law or agreed to in writing,
' software distributed under the License is distributed on an
' "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
' KIND, either express or implied. See the License for the
' specific language governing permissions and limitations
' under the License.
'
'*************************************************************************
'*
'* short description : Tools / XML Filter Settings Resource Test
'*
'\******************************************************************************
testcase tToolsXMLFilterSettings
Dim iCountOfXSLTStylesAtBeginning as integer
Dim iCountOfXSLTStylesAfterInstallCheck as integer
Dim iApplicationEntries as integer
Dim ia as integer
Dim ib as integer
Dim ic as integer
Dim iCountMsgBox as integer
Dim sErrorPointerTextForResultfile as string
Dim sFilterPackagePath as string
Dim sDocXMLTestFile as string
Dim sWhichFilterToUse as string
Dim sTempReadFilterName as string
Dim bREMOVEXSLT as boolean
Dim bJavaBroken as boolean
'Not being used for Writer/WEB
if gApplication = "HTML" then
goto endsub
endif
'Define the pointer where all warnlogs/QAErrorLogs will come from in this routine.
sErrorPointerTextForResultfile = "global::tools::inc::t_xml_filter1,inc::tToolsXMLFilterSettings: "
'Later it will be detected if the JRE is working with the office installation
'Here bJavaBroken will be set to the default behaviour (Java is detected and is working)
bJavaBroken = FALSE
'/// Opening new document.
printlog "- Opening new (application) document."
call hNewDocument
'/// Calling the menu item Tools -> XML Filter Settings
ToolsXMLFilterSettings
printlog "- XML Filter Settings"
Kontext "XMLFilterSettings"
if XMLFilterSettings.Exists(1) then
call Dialogtest (XMLFilterSettings)
else
warnlog sErrorPointerTextForResultfile & "Slot to open the 'XML Filter Settings dialog' failed. Exiting."
goto endsub
end if
'Counting the existing XSLT stylesheets to verify them after the
'XSLT stylesheet Check. Setting bREMOVEXSLT = FALSE which only will
'be TRUE if the count of before and after the check are different.
bREMOVEXSLT = FALSE
iCountOfXSLTStylesAtBeginning = FilterList.GetItemCount
'/// Closing the XML Filter Settings-dialog.
printlog "Closing the 'XML Filter Settings'-dialog."
CloseBtn.Click
'/// Checking if there are any XSLT stylesheets available (finitialXMLSetting("docbook or word or excel")).
printlog " + Checking if there are any XSLT stylesheets available."
select case gApplication
case "CALC" : sWhichFilterToUse = "excel"
case "WRITER" : sWhichFilterToUse = "word"
case else : sWhichFilterToUse = "docbook"
end select
if finitialXMLSetting(sWhichFilterToUse) = FALSE then
warnlog "It wasn't possible to use/install external XML filter. Test aborting!"
goto endsub
end if
ToolsXMLFilterSettings
printlog "Open XML Filter Settings dialog again."
Kontext "XMLFilterSettings"
iCountOfXSLTStylesAfterInstallCheck = FilterList.GetItemCount
if iCountOfXSLTStylesAfterInstallCheck <> iCountOfXSLTStylesAtBeginning then
bREMOVEXSLT = TRUE
end if
'/// Checking disabling of buttons on this dialog.
printlog " + Checking that Edit/Test/Delete/SaveToPackage buttons disabled when no filter is selected."
if EditBtn.IsEnabled then
FilterList.Typekeys ""
sleep(1)
end if
if EditBtn.IsEnabled then
warnlog sErrorPointerTextForResultfile & "Edit button: Enabled when no entry is selected!?"
end if
if TestXSLTs.IsEnabled then
warnlog sErrorPointerTextForResultfile & "TestXSLTs button: Enabled when no entry is selected!?"
end if
if DeleteBtn.IsEnabled then
warnlog sErrorPointerTextForResultfile & "Delete button: Enabled when no entry is selected!?"
end if
if SaveToPackage.IsEnabled then
warnlog sErrorPointerTextForResultfile & "SaveToPackage button: Enabled when no entry is selected!?"
end if
'/// Checking disabling of buttons on this dialog.
printlog " + Checking that Edit/Test/Delete/SaveToPackage buttons enabled when one filter is selected."
if NOT EditBtn.IsEnabled then
FilterList.Typekeys ""
sleep(1)
end if
if NOT EditBtn.IsEnabled then
warnlog sErrorPointerTextForResultfile & "Edit button: Disabled when one entry is selected!?"
end if
if NOT TestXSLTs.IsEnabled then
warnlog sErrorPointerTextForResultfile & "TestXSLTs button: Disabled when one entry is selected!?"
end if
if NOT DeleteBtn.IsEnabled then
warnlog sErrorPointerTextForResultfile & "Delete button: Disabled when one entry is selected!?"
end if
if NOT SaveToPackage.IsEnabled then
warnlog sErrorPointerTextForResultfile & "SaveToPackage button: Disabled when one entry is selected!?"
end if
'/// [Loop]
'///+ - Clicking the "New" button
'///+ - Clicking the "Edit" button
Kontext "XMLFilterSettings"
FilterList.TypeKeys ""
for ic = 1 to iCountOfXSLTStylesAfterInstallCheck
Kontext "XMLFilterSettings"
if ( XMLFilterSettings.exists( 2 ) ) then
'read the filter names from the dialog.
sTempReadFilterName = FilterList.GetItemText(ic)
'lower case comparison!
sTempReadFilterName = lcase(sTempReadFilterName)
if InStr(sTempReadFilterName , sWhichFilterToUse) <> 0 then
FilterList.TypeKeys " " , ic-1
' printlog "DEBUG: Filtername: " & FilterList.GetItemText(ic)
WaitSlot() ' Sort of NOOP
endif
else
warnlog( "XML Filter Settings dialog too slow/not displayed" )
endif
next ic
for ia = 1 to 2
Kontext "XMLFilterSettings"
select case ia
case 1 : printlog "+- New"
NewBtn.Click
case 2 : printlog "+- Edit"
EditBtn.Click
end select
sleep(1)
Kontext "XMLFilter"
if XMLFilter.Exists(2) then
select case ia
case 1 : printlog " (XML Filter: New)"
case 2 : printlog " (XML Filter: Edit)"
end select
call Dialogtest (XMLFilter)
Tabcontrol.SetPage TabXMLGeneral
Kontext "TabXMLGeneral"
printlog " +- TabXMLGeneral"
if ia = 1 then
'/// If the "New"-button has been used:
call Dialogtest (TabXMLGeneral)
iApplicationEntries = Application.GetItemCount
'///+ - Checking the count of applications. Should be 8.
printlog " Checking the count of applications. Should be 8."
if iApplicationEntries <> 8 then
warnlog " +- There should be 8 applications listed in the 'Application'-listbox but there are " & iApplicationEntries & " available!"
else
printlog " +- 8 applications listed in 'Application' listbox."
end if
end if
Kontext "XMLFilter"
Tabcontrol.SetPage TabXMLTransformation
Kontext "TabXMLTransformation"
printlog " +- TabXMLTransformation"
call Dialogtest (TabXMLTransformation)
'/// On tab page "Transformation" press all "Browse"-buttons.
printlog " +- On tab page 'Transformation' press all 'Browse'-buttons."
for ib = 1 to 4
Kontext "TabXMLTransformation"
select case ib
case 1 : printlog " +- Browse button 'DTD'"
DTDBrowse.Click
case 2 : printlog " +- Browse button 'XSLT for export'"
XSLTForExportBrowse.Click
case 3 : printlog " +- Browse button 'XSLT for import'"
XSLTForImportBrowse.Click
case 4 : printlog " +- Browse button 'Template for import'"
BrowseTemplateForImport.Click
end select
Kontext "OeffnenDlg"
if OeffnenDlg.Exists(3) then
'/// After every click on "Browse"-button an "FileOpen"-dialog shoud be visible. Cancel that dialog.
printlog " +- After every click on 'Browse'-button an 'FileOpen'-dialog shoud be visible. Cancel that dialog."
call Dialogtest (OeffnenDlg)
OeffnenDlg.Cancel
else
warnlog sErrorPointerTextForResultfile & "File Open dialog did not appeared."
end if
next ib
'/// [Loop end]
Kontext "XMLFilter"
if ( XMLFilter.exists( 3 ) ) then
printlog " +- Closing 'XML Filter: New Filter'-dialog."
XMLFilter.Cancel
else
warnlog( "XML Filter Dialog not available" )
endif
'/// Closing "XML Filter: New Filter"-dialog
else
warnlog "XML Filter dialog did not appeared!"
end if
next ia
Kontext "XMLFilterSettings"
'/// Clicking "Test XLSTs"-button.
printlog "+- Clicking 'Test XLSTs'-button."
TestXSLTs.Click
'If it's an Import filter it makes no sense to test the export.
if sWhichFilterToUse = "docbook" then
printlog "+- E X P O R T (Writer, Impress)"
Kontext "TestXMLFilter"
if TestXMLFilter.Exists( 3 ) then
call Dialogtest(TestXMLFilter)
else
warnlog sErrorPointerTextForResultfile & "Testing of the XML filter not possible. Exiting."
Kontext "XMLFilterSettings"
'/// Closing the "XML Filter Settings"-dialog.
printlog "+- Closing the 'XML Filter Settings'-dialog."
'Deinstall the XSLT stylesheet if this routine has
'added one at the beginning.
if bREMOVEXSLT = TRUE then
call sRemoveXSLTFilter
end if
Kontext "XMLFilterSettings"
CloseBtn.Click
'/// Closing the opened application document.
printlog "- Closing the opened application document."
'/// ...if there is more than 1 document opened.
if GetDocumentCount > 1 then
call hCloseDocument
end if
'Here the routine stops if the test dialog is not opening.
goto endsub
end if
ExportBrowseBtn.Click
'/// Press first "Browse"-button on the "Test XML Filter"-dialog.
printlog " +-Press first 'Browse'-button on the 'Test XML Filter'-dialog."
Kontext "OeffnenDlg"
if OeffnenDlg.Exists( 3 ) then
call Dialogtest (OeffnenDlg)
OeffnenDlg.Cancel
'/// Closing 'FileOpen'-Dialog.
printlog " +- Closing 'FileOpen'-Dialog."
else
warnlog sErrorPointerTextForResultfile & "File Open dialog did not occoured?!"
end if
Kontext "TestXMLFilter"
if ( TestXMLFilter.exists( 2 ) ) then
'/// If the application is Writer (because the default XSLT stylesheets are only Writer filter).
'///+- Clicking on "Current Document"-button.
if gApplication = "WRITER" then
printlog " +- Clicking on 'Current Document'-button."
CurrentDocument.Click
'/// If Java is not [correctly] installed a messagebox will be shown and the test of the filter will be canceled!
Kontext "Messagebox"
if MessageBox.Exists( 5 ) then
warnlog Messagebox.GetText
try
Messagebox.Cancel
catch
Messagebox.OK
endcatch
else
try
Kontext "XMLFilterOutput"
if XMLFilterOutput.Exists(1) then
'/// "XML Filter Output"-dialog should be visible.
printlog " +- 'XML Filter Output'-dialog should be visible."
call Dialogtest(XMLFilterOutput)
'/// Clicking "Validate"-button.
printlog " +- Clicking 'Validate'-button."
Validate.Click
WaitSlot( 2000 )
'/// Checking that the validate output control is visible inside the window.
printlog " +- Checking that the validate output control is visible inside the window."
if NOT ValidateOutput.isVisible then
warnlog " +- Validate output is not visible!"
end if
'/// Closing "XML Filter Output"-dialog.
printlog " +- Closing 'XML Filter Output'-dialog."
XMLFilterOutput.Close
else
warnlog sErrorPointerTextForResultfile & "XML Filter Ouput dialog did not occoured."
end if
catch
warnlog "Testing of XSLTs does not work."
endcatch
end if
else
Kontext "TestXMLFilter"
printlog " +- 'Current Document'-button should not be enabled if no !"
if CurrentDocument.IsEnabled then
Kontext "DocumentWriter"
try
DocumentWriter.TypeKeys "A writer document exists!"
catch
QAErrorLog "'Current Document'-button is enabled but a 'Writer' XML filter has been selected! If there's no Writer document (may be in the background) also opened it would be a bug!"
endcatch
end if
end if
else
warnlog( "FATAL: TestXMLFilter not available" )
end if
printlog "+- I M P O R T"
endif
Kontext "TestXMLFilter"
if ( TestXMLFilter.exists( 2 ) ) then
'/// Clicking "Browse"-button (Import).
printlog " +- Clicking 'Browse'-button (Import)."
ImportBrowseBtn.Click
Kontext "OeffnenDlg"
if OeffnenDlg.Exists( 2 ) then
call Dialogtest (OeffnenDlg)
'/// Closing "FileOpen"-dialog.
printlog " +- Closing 'FileOpen'-dialog."
OeffnenDlg.Cancel
else
warnlog sErrorPointerTextForResultfile & "File Open dialog did not occoured?!"
end if
else
warnlog( "FATAL: Dialog is not available" )
endif
Kontext "TestXMLFilter"
'/// Checking if 'Display Source'-checkbox is checked (should not be!).
printlog " +- Checking if 'Display Source'-checkbox is checked (should not be!)."
if NOT DisplaySource.IsChecked then
DisplaySource.Check
else
warnlog " +- Display source should be NOT checked as default!"
end if
Kontext "TestXMLFilter"
select case sWhichFilterToUse
case "docbook" : '/// If DocBook XML is being tested use a DocBook XML file.
sDocXMLTestFile = ConvertPath(gTestToolPath & "global\input\xml_filter\docbook.xml")
case "word" : '/// If Word XML is being tested use a Word XML file.
sDocXMLTestFile = ConvertPath(gTestToolPath & "global\input\xml_filter\word.xml")
case "excel" : '/// If Excel XML is being tested use a Excel XML file.
sDocXMLTestFile = ConvertPath(gTestToolPath & "global\input\xml_filter\excel.xml")
case "xhtml" : '/// If XHTML is being tested that use a XHTML file.
sDocXMLTestFile = ConvertPath(gTestToolPath & "global\input\xml_filter\xhtml.xhtml")
case else : warnlog sErrorPointerTextForResultfile & "Wrong parameter has been used! Exiting"
Kontext "TestXMLFilter"
'/// Closing the "Test XML Filter"-dialog.
printlog " +- Closing the 'Test XML Filter'-dialog"
CloseBtn.Click
Kontext "XMLFilterSettings"
'/// Closing the "XML Filter Settings"-dialog.
printlog "+- Closing the 'XML Filter Settings'-dialog."
'Deinstall the XSLT stylesheet if this routine has
'added one at the beginning.
if bREMOVEXSLT = TRUE then
call sRemoveXSLTFilter
end if
Kontext "XMLFilterSettings"
CloseBtn.Click
'/// Closing the opened application document.
printlog "- Closing the opened application document."
'/// ...if there is more than 1 document opened.
if GetDocumentCount > 1 then
Call hCloseDocument
end if
goto endsub
end select
'/// Clicking "Browse"-button (Import) again to test it with the XML file.
printlog " +- Clicking 'Browse'-button (Import) again to test it the XML file."
ImportBrowseBtn.Click
Kontext "OeffnenDlg"
if OeffnenDlg.Exists( 3 ) then
call Dialogtest (OeffnenDlg)
Dateiname.SetText sDocXMLTestFile
Oeffnen.Click
try
' If Java is not [correctly] installed a messagebox will be shown and the test of the filter will be canceled!
Kontext "Messagebox"
if Messagebox.Exists(2) then
for iCountMsgBox = 1 to 5
Kontext "Messagebox"
if MessageBox.Exists(2) then
if MessageBox.GetRT = 304 then
if iCountMsgBox = 1 then
warnlog sErrorPointerTextForResultfile & "No output window was visible! Exiting routine!"
endif
QAErrorLog "Dialog (" & iCountMsgBox & "): " & Messagebox.GetText
Messagebox.OK
bJavaBroken = TRUE
if iCountMsgBox > 3 then
warnlog "Instead of 3 times the missing Java RT box will be shown " & iCountMsgBox & " times."
endif
end if
else
exit for
endif
next iCountMsgBox
endif
Kontext "XMLFilterOutput"
if XMLFilterOutput.Exists(3) then
'/// "XML Filter Output"-dialog should be visible.
printlog " +- 'XML Filter Output'-dialog should be visible."
call Dialogtest(XMLFilterOutput)
'/// Clicking "Validate"-button.
printlog " +- Clicking 'Validate'-button."
Validate.Click
Kontext "Messagebox"
if Messagebox.Exists( 2 ) then
if bJavaBroken then
Messagebox.OK
else
warnlog Messagebox.GetText
Messagebox.OK
endif
endif
'/// Checking that the validate output control is visible inside the window.
printlog " +- Checking that the validate output control is visible inside the window."
Kontext "XMLFilterOutput"
if NOT ValidateOutput.isVisible then
warnlog " +- Validate output is not visible!"
end if
'/// Closing "XML Filter Output"-dialog.
printlog " +- Closing 'XML Filter Output'-dialog."
Kontext "XMLFilterOutput"
XMLFilterOutput.Close
else
warnlog sErrorPointerTextForResultfile & "No output window was visible! Exiting routine!"
Kontext "TestXMLFilter"
'/// Closing the "Test XML Filter"-dialog.
printlog " +- Closing the 'Test XML Filter'-dialog"
CloseBtn.Click
Kontext "XMLFilterSettings"
'/// Closing the "XML Filter Settings"-dialog.
printlog "+- Closing the 'XML Filter Settings'-dialog."
'Deinstall the XSLT stylesheet if this routine has
'added one at the beginning.
if bREMOVEXSLT = TRUE then
call sRemoveXSLTFilter
end if
Kontext "XMLFilterSettings"
CloseBtn.Click
'/// Closing the opened application document.
printlog "- Closing the opened application document."
'/// ...if there is more than 1 document opened.
if GetDocumentCount > 1 then
call hCloseDocument
end if
'Here the routine stops if there is no Java installed or the output was not visible.
goto endsub
end if
catch
'/// If Java is not [correctly] installed a messagebox will be shown and the test of the filter will be canceled!
Kontext "Messagebox"
if MessageBox.Exists( 2 ) then
warnlog Messagebox.GetText
Messagebox.OK
warnlog sErrorPointerTextForResultfile & "Java is not usable! Exiting routine!"
Kontext "TestXMLFilter"
'/// Closing the "Test XML Filter"-dialog.
printlog " +- Closing the 'Test XML Filter'-dialog"
CloseBtn.Click
Kontext "XMLFilterSettings"
'/// Closing the "XML Filter Settings"-dialog.
printlog "+- Closing the 'XML Filter Settings'-dialog."
'Deinstall the XSLT stylesheet if this routine has
'added one at the beginning.
if bREMOVEXSLT = TRUE then
call sRemoveXSLTFilter
end if
Kontext "XMLFilterSettings"
CloseBtn.Click
'/// Closing the opened application document.
printlog "- Closing the opened application document."
'/// ...if there is more than 1 document opened.
if GetDocumentCount > 1 then
call hCloseDocument
end if
goto endsub
end if
endcatch
else
warnlog sErrorPointerTextForResultfile & "File Open dialog missing! Not able to load test documents. Exiting routine!"
Kontext "TestXMLFilter"
'/// Closing the "Test XML Filter"-dialog.
printlog " +- Closing the 'Test XML Filter'-dialog"
CloseBtn.Click
Kontext "XMLFilterSettings"
'/// Closing the "XML Filter Settings"-dialog.
printlog "+- Closing the 'XML Filter Settings'-dialog."
'Deinstall the XSLT stylesheet if this routine has
'added one at the beginning.
if bREMOVEXSLT = TRUE then
call sRemoveXSLTFilter
end if
Kontext "XMLFilterSettings"
CloseBtn.Click
'/// Closing the opened application document.
printlog "- Closing the opened application document."
'/// ...if there is more than 1 document opened.
if GetDocumentCount > 1 then
call hCloseDocument
end if
goto endsub
end if
'/// Closing the tested XML document
printlog " +- Closing the tested XML document"
'/// ...if there is more than 1 document opened.
if GetDocumentCount > 1 then
call hCloseDocument
else
QAErrorLog "#i27370# Normaly there should be a second document but there is none!"
end if
Kontext "TestXMLFilter"
if ( TestXMLFilter.exists( 1 ) ) then
if bJavaBroken = FALSE then
'/// Clicking on "Recent File"-Button.
printlog " +- Clicking on 'Recent File'-Button."
RecentFile.Click
Kontext "XMLFilterOutput"
'/// "XML Filter Output"-dialog should be visible.
printlog " +- 'XML Filter Output'-dialog should be visible."
Kontext "XMLFilterOutput"
'/// Closing "XML Filter Output"-dialog.
printlog " +- Closing 'XML Filter Output'-dialog."
XMLFilterOutput.Close
'/// Closing the tested XML document
printlog " +- Closing the tested XML document"
'/// ...if there is more than 1 document opened.
if GetDocumentCount > 1 then
call hCloseDocument
else
QAErrorLog "#i27370# Normaly there should be a second document but there is none!"
end if
Kontext "TestXMLFilter"
'/// Closing the "Test XML Filter"-dialog.
printlog " +- Closing the 'Test XML Filter'-dialog"
endif
else
warnlog( "Dialog is not available" )
endif
CloseBtn.Click
Kontext "XMLFilterSettings"
if ( XMLFilterSettings.exists( 1 ) ) then
'/// Clicking "Delete"-button.
printlog " +- Clicking 'Delete'-button"
DeleteBtn.Click
Kontext
if Active.Exists(1) then
if Active.GetRT = 304 then
Active.No
end if
end if
else
warnlog( "Dialog is not available" )
endif
'/// Clicking 'Save to Package'-button.
Kontext "XMLFilterSettings"
if ( XMLFilterSettings.exists( 1 ) ) then
printlog " +- Clicking 'Save to Package'-button."
SaveToPackage.Click
Kontext "SpeichernDlg"
if SpeichernDlg.Exists( 3 ) then
call Dialogtest(SpeichernDlg)
SpeichernDlg.Cancel
'/// Closing 'File Save As'-Dialog.
printlog " +- Closing 'File Save As'-Dialog."
else
warnlog sErrorPointerTextForResultfile & "Save As dialog missing!"
end if
else
warnlog( "Dialog is not available" )
endif
'/// Clicking 'Open Package'-button.
Kontext "XMLFilterSettings"
if ( XMLFilterSettings.exists( 1 ) ) then
printlog " +- Clicking 'Open Package'-button."
OpenPackage.Click
Kontext "OeffnenDlg"
if OeffnenDlg.Exists( 3 ) then
call Dialogtest(OeffnenDlg)
OeffnenDlg.Cancel
'/// Closing 'FileOpen'-Dialog.
printlog " +- Closing 'FileOpen'-Dialog."
else
warnlog sErrorPointerTextForResultfile & "File open dialog missing!"
end if
else
warnlog( "Dialog is not available" )
endif
'/// Closing the "XML Filter Settings"-dialog.
Kontext "XMLFilterSettings"
if ( XMLFilterSettings.exists( 1 ) ) then
printlog "+- Closing the 'XML Filter Settings'-dialog."
'Deinstall the XSLT stylesheet if this routine has
'added one at the beginning.
if bREMOVEXSLT = TRUE then
call sRemoveXSLTFilter
end if
else
warnlog( "Dialog is not available" )
endif
Kontext "XMLFilterSettings"
if ( XMLFilterSettings.exists( 1 ) ) then
CloseBtn.Click
'/// Closing the opened application document.
else
warnlog( "Dialog is not available" )
endif
printlog "- Closing the opened application document."
'/// ...if there is more than 1 document opened.
if ( hFileCloseAll() <> 2 ) then
QAErrorLog "#i27370# Normaly there should be a second document but there is none!"
end if
endcase
'-------------------------------------------------------------------------
sub fInitialXMLSetting( sXMLFilterType as string ) as boolean
'/// This small function adds the latest and greatest XSLT stylesheet
'///+ to the office.
'///+ The result is TRUE if the packages are already available or if they
'///+ have been installed successfully in this routine.
'/// Input: excel, word, docbook, xhtml
'/// Output: TRUE or FALSE
Dim iCountOfDefaultXSLTStyles as integer
Dim iSecondCountOfDefaultXSLTStyles as integer
Dim sFilterPackagePath as string
Dim sTempReadFilterName as string
Dim ia as integer
'Setting boolean to FALSE
fInitialXMLSetting = FALSE
'/// Opening new document.
printlog "global::tools::inc::t_xml_filter1,inc::fInitialXMLSetting: Opening new " & gApplication & " document."
call hNewDocument
'/// Calling the menu item Tools -> XML Filter Settings
ToolsXMLFilterSettings
printlog "global::tools::inc::t_xml_filter1,inc::fInitialXMLSetting: Opening the XML Filter Settings dialog."
Kontext "XMLFilterSettings"
call Dialogtest (XMLFilterSettings)
'/// Checking if there are any XSLT stylesheets available.
printlog "global::tools::inc::t_xml_filter1,inc::fInitialXMLSetting: Checking if there are any XSLT stylesheets available."
iCountOfDefaultXSLTStyles = FilterList.GetItemCount
' printlog "DEBUG (a): " & iCountOfDefaultXSLTStyles
if iCountOfDefaultXSLTStyles <> 0 then
'/// Check if the same filter already exists.
'Using lowercased input parameter.
sXMLFilterType = lcase(sXMLFilterType)
for ia = 1 to iCountOfDefaultXSLTStyles
Kontext "XMLFilterSettings"
'read the filter names from the dialog.
sTempReadFilterName = FilterList.GetItemText(ia)
' printlog "global::tools::inc::t_xml_filter1,inc::fInitialXMLSetting: DEBUG: (" & ia & ") " & sTempReadFilterName
'lower case comparison!
sTempReadFilterName = lcase(sTempReadFilterName)
'if a _part_ of the filtername matches the readed filter name the criteria is true!
if InStr(sTempReadFilterName , sXMLFilterType) <> 0 then
fInitialXMLSetting = TRUE
Kontext "XMLFilterSettings"
CloseBtn.Click
Call hCloseDocument
exit sub
end if
next ia
'if no filter name maches the for...next loop will be left
'and the same routine as used for 0 filter installed will
'be used to install a filter package.
end if
printlog "global::tools::inc::t_xml_filter1,inc::fInitialXMLSetting: The XML filter is not available: Adding the " & sXMLFilterType & " XML filter."
'///+ The packages will be used from "qatesttool/global/input/xslt_stylesheets/*.jar"
' printlog "DEBUG: " & sXMLFilterType
select case sXMLFilterType
case "excel" : sFilterPackagePath = ConvertPath(gTestToolPath & "global\input\xslt_stylesheets\excel.jar")
case "word" : sFilterPackagePath = ConvertPath(gTestToolPath & "global\input\xslt_stylesheets\word.jar")
case "docbook" : sFilterPackagePath = ConvertPath(gTestToolPath & "global\input\xslt_stylesheets\docbook.jar")
case "xhtml" : sFilterPackagePath = ConvertPath(gTestToolPath & "global\input\xslt_stylesheets\xhtml.jar")
end select
OpenPackage.Click
Kontext "OeffnenDlg"
if ( OeffnenDlg.exists( 2 ) ) then
call Dialogtest (OeffnenDlg)
Dateiname.SetText sFilterPackagePath
Oeffnen.Click
Kontext
if Active.Exists(3) then
if Active.GetRT = 304 then
printlog "global::tools::inc::t_xml_filter1,inc::fInitialXMLSetting: " & Active.GetText
Active.OK
Kontext "XMLFilterSettings"
iSecondCountOfDefaultXSLTStyles = FilterList.GetItemCount
printlog "global::tools::inc::t_xml_filter1,inc::fInitialXMLSetting: Checking again the count of installed XSLT stylesheets."
if iSecondCountOfDefaultXSLTStyles <> (iCountOfDefaultXSLTStyles+1) then
warnlog "global::tools::inc::t_xml_filter1,inc::fInitialXMLSetting: It was not possible to add " & sXMLFilterType & "-XML filter!"
warnlog "global::tools::inc::t_xml_filter1,inc::fInitialXMLSetting: Test aborted!"
exit sub
else
printlog "global::tools::inc::t_xml_filter1,inc::fInitialXMLSetting: XML filter has been installed!"
fInitialXMLSetting = TRUE
end if
end if
end if
else
warnlog( "Dialog is not available" )
endif
Kontext "XMLFilterSettings"
if ( XMLFilterSettings.exists( 1 ) ) then
'/// Closing the XML Filter Settings-dialog.
printlog "global::tools::inc::t_xml_filter1,inc::fInitialXMLSetting: Closing the 'XML Filter Settings'-dialog."
CloseBtn.Click
else
warnlog( "Dialog is not available" )
endif
'/// Closing the opened application document.
printlog "global::tools::inc::t_xml_filter1,inc::fInitialXMLSetting: Closing the opened application document."
call hCloseDocument
end sub
'-------------------------------------------------------------------------
sub sRemoveXSLTFilter
Dim sXMLFilterType as string
Dim iCountOfDefaultXSLTStyles as integer
Dim ia as integer
Dim sTempReadFilterName as string
Kontext "XMLFilterSettings"
select case gApplication
case "CALC" : sXMLFilterType = "excel"
case "WRITER" : sXMLFilterType = "word"
case else : sXMLFilterType = "docbook"
end select
iCountOfDefaultXSLTStyles = FilterList.GetItemCount
if iCountOfDefaultXSLTStyles <> 0 then
'/// Search for the filter in filter list.
'Using lowercased input parameter.
for ia = 1 to iCountOfDefaultXSLTStyles
Kontext "XMLFilterSettings"
'read the filter names from the dialog.
sTempReadFilterName = FilterList.GetItemText(ia)
'lower case comparison!
if InStr(sTempReadFilterName , sXMLFilterType) <> 0 then
'/// If the filter has been found delete it.
FilterList.TypeKeys ""
wait( 100 )
FilterList.TypeKeys "" , (ia-1)
wait( 100 )
DeleteBtn.Click
Kontext
if Active.Exists(1) then
if Active.GetRT = 304 then
Active.Yes
end if
end if
exit sub
end if
next ia
else
warnlog "The count of XML filters has to be >0! Problem?"
end if
end sub