# ************************************************************* # # Licensed to the Apache Software Foundation (ASF) under one # or more contributor license agreements. See the NOTICE file # distributed with this work for additional information # regarding copyright ownership. The ASF licenses this file # to you under the Apache License, Version 2.0 (the # "License"); you may not use this file except in compliance # with the License. You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, # software distributed under the License is distributed on an # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY # KIND, either express or implied. See the License for the # specific language governing permissions and limitations # under the License. # # *************************************************************  # dumper settings ============================================================ # # Basic concepts # # - Character encoding of dumper ini files is UTF-8. # - Whitespace characters are generally stripped, e.g. at start and end of # lines, before/after equal signs, commas, etc. # - Comments start with the hash (#) or semicolon (;) character. Leading # whitespace characters are ignored. # # ---------------------------------------------------------------------------- # Enable entire dumper (default=off). This option does not affect the option # 'enable-import'. # 0=off, 1=on enable-dumper=1 # Enable import after dumping (default=on). Disabling this option allows # to dump a file without loading it. This option is independent from the # 'enable-dumper' option. # 0=off, 1=on enable-import=1 # Maximum size of binary stream dumps (default=infinite). max-binary-stream-size=65536 # Maximum size of binary data blocks in content dumps (default=infinite). max-binary-data-size=128 # Shows unknown trailing data as binary dump (default=on). # 0=off, 1=on show-trailing-unknown=1 # Shows the absolute stream position of records in the record header field # (default=on). # 0=off, 1=on show-record-position=0 # name lists ================================================================= # # Syntax descriptions # # - Optional items are enclosed in brackets []. # - Optional items that may be repeated are marked with an ellipsis (...). # - Items in a set to choose from are separated by vertical lines (|). # - denotes the name of a list. List names may consist of any non- # whitespace characters. # - , , , etc. denote integer values. # Decimal and hexadecimal notation is supported, using C/C++ notation. # - denotes a boolean value. Possible values are 0|1|false|true. # - denotes a literal name for a constant or bit. # # ---------------------------------------------------------------------------- # # constlist # # Defines names for a list of specific values. # # Syntax: # # constlist = # default = # include = [,...] # exclude = [,...] # quote-names = # = # end # # - default (optional): Declares as a default name for values not # specified in the name list. may be the empty string. If not # set, the literal string '?err:no-name' (unquoted) is the default name. # - include (optional): Includes the specified name list(s) into the own list. # - exclude (optional): Removes values from the name lists, useful e.g. after # a name list has been included. # - quote-names (optional): Specifies whether to return the contained names # enclosed in single quote (') characters. Default is false. # # The order of the declarations is important, later declarations may overwrite # names generated from earlier declarations. # # Example: # # constlist = EXAMPLE-CONSTLIST # 1 = my-value # include = OTHER-LIST # exclude = 2,3 # 0x0004 = other-value # end # # - Defines the name 'my-value' for the constant 1. # - Includes 'OTHER-LIST' which may overwrite the name of the constant 1. # - Excludes the names of constants 2 and 3, which may have been included from # the name list 'OTHER-LIST'. # - Defines the name 'other-value' for the constant 4, which may overwrite the # name of this constant included from the name list 'OTHER-LIST'. # # ---------------------------------------------------------------------------- # # multilist # # Defines names for contiguous ranges of values. # # Syntax: # # multilist = # default = # include = [,...] # exclude = [,...] # ignore-empty = # = [,...] # end # # - default (optional): See constlist above. # - include (optional): See constlist above. # - exclude (optional): See constlist above. # - ignore-empty (optional): Specifies whether to skip empty names in a list. # - True = skips an empty entry, the default name will be generated. # - False = creates an empty string for the entry. # Default is true (skip empty entries). # # Examples: # # multilist = EXAMPLE-MULTILIST # 0 = value0,value1,,value3 # 8 = value8 # end # # - Defines the names 'value0' for the constant 0, 'value1' for the constant # 1, 'value3' for the constant 3, and 'value8' for the constant 8. # # multilist = EXAMPLE-MULTILIST-2 # include = EXAMPLE-MULTILIST # ignore-empty = false # default = other # end # # - Same as example above (includes EXAMPLE-MULTILIST), but defines the empty # string for the constant 2. Other constants (less than 0 or greater than 3 # and not equal to 8) get the default name 'other'. # # ---------------------------------------------------------------------------- # # shortlist # # Defines names for a contiguous range of values. The entire list definition # is given in a single text line. # # Syntax: # # shortlist = ,,[,...] # # Uses default settings of the multi-list (i.e. skips empty entries). # # ---------------------------------------------------------------------------- # # flagslist # # Defines names for single bits in a bit field. # # Syntax: # # flagslist = # include = [,...] # exclude = [,...] # ignore = # = | ! | : | !! # end # # - include (optional): See constlist above. # - exclude (optional): See constlist above. # - ignore (optional): Specifies bits to be ignored. Bits without an explicit # name and not set in this declaration will be shown as unknown. Default is # to not ignore a bit. # - : The bit to be named. Must be a value with a single bit set. # - - Sets a name for the bit that will be shown if the bit is set. # Does not show anything if the bit is cleared. # - ! - Sets a name for the bit that will be shown if the bit is # cleared. Does not show anything if the bit is set. # - : - Sets a name for the bit that will always be shown together # with the actual state of the bit, appended as ':on' or ':off'. # - !! - Sets a name for both the cleared bit (cname0), and # for the set bit (cname1). # # ---------------------------------------------------------------------------- # # combilist # # Defines names for single bits and for embedded values in a bit field. This # is an extension of the flagslist described above. # # Syntax: # # combilist = # include = [,...] # exclude = [,...] # ignore = # = | ! | : | !! # = ,,[,[,options...]] # end # # - include (optional): See constlist above. # - exclude (optional): See constlist above. # - ignore (optional): See flagslist above. # - : See flagslist above. # - : The mask of the embedded bitfield. Must be a value with # exactly one sequence of at least 2 consecutive bits. # - : [u]int8 | [u]int16 | [u]int32 | [u]int64 | float | double # - : dec | hex | shorthex | bin | fix | bool # - : The name of the embedded bitfield. # - : Optional name list with names for the values of the embedded # bitfield. # - options: Additional options for this bitfield: # - filter = ~: If set, the entire bitfield # will only be written, if the complete data item currently dumped # contains exactly the value specified in in the bitfield # specified in . Otherwise, nothing is written. It is # possible to specify multiple filter rules for this bitfield. In that # case, the bitfield will be written, if at least one filter rule # applies for the current data item. # - noshift = : If set to 'true', the extracted value will be # shifted to the right (normalized). If set to 'false', the value will # be written unshifted. Default is 'true'. # # ---------------------------------------------------------------------------- # # unitconverter # # Converts values and appends a unit name. # # Syntax: # # unitconverter = ,[/][,] # # ---------------------------------------------------------------------------- unitconverter=CONV-DEC,1 unitconverter=CONV-PERCENT,1,% unitconverter=CONV-FLOAT-TO-PERC,100,% unitconverter=CONV-DEG,1,° unitconverter=CONV-HMM-TO-CM,/1000,cm unitconverter=CONV-INCH-TO-CM,2.54,cm unitconverter=CONV-PT-TO-CM,/28.346457,cm unitconverter=CONV-PT1616-TO-CM,/1857713.4,cm unitconverter=CONV-TWIP-TO-CM,/566.92913,cm unitconverter=CONV-TWIP-TO-PT,/20,pt unitconverter=CONV-EMU-TO-CM,/36000,cm constlist=BOOLEAN 0=FALSE default=TRUE end combilist=RK-FLAGS 0x00000001=div-100 0x00000002=integer 0xFFFFFFFC=int32,hex,value end constlist=CHARSET 0=win-1252-latin-1 1=system-default 2=symbol 77=apple-roman 128=win-932-japanese-shift-jis 129=win-949-korean-hangul 130=win-1361-korean-johab 134=win-936-chinese-simplified-gbk 136=win-950-chinese-traditional-big5 161=win-1253-greek 162=win-1254-turkish 163=win-1258-vietnamese 177=win-1255-hebrew 178=win-1256-arabic 186=win-1257-baltic 204=win-1251-cyrillic 222=win-874-thai 238=win-1250-latin-2-central-european 255=ibm-850-latin-1 end combilist=FONT-PITCHFAMILY 0x0F=uint8,dec,pitch,FONT-PITCH 0xF0=uint8,dec,family,FONT-FAMILY end constlist=FONT-WEIGHT 400=normal 700=bold end shortlist=FONT-PITCH,0,unknown,fixed,variable shortlist=FONT-FAMILY,0,unknown,roman,swiss,modern,script,decorative constlist=CODEPAGES 367=ascii 437=ibm-437-us 708=iso-8859-6 720=ibm-720-arabic 737=ibm-737-greek 775=ibm-775-baltic 850=ibm-850-latin-1 852=ibm-852-latin-2-central-european 855=ibm-855-cyrillic 857=ibm-857-turkish 858=ibm-858-multilingual-latin-1-with-euro 860=ibm-860-portuguese 861=ibm-861-icelandic 862=ibm-862-hebrew 863=ibm-863-canadian-french 864=ibm-864-arabic 865=ibm-865-nordic 866=ibm-866-cyrillic-russian 869=ibm-869-greek-modern 874=win-874-thai 932=win-932-japanese-shift-jis 936=win-936-chinese-simplified-gbk 949=win-949-korean-wansung 950=win-950-chinese-traditional-big5 1200=utf-16 1250=win-1250-latin-2-central-european 1251=win-1251-cyrillic 1252=win-1252-latin-1 1253=win-1253-greek 1254=win-1254-turkish 1255=win-1255-hebrew 1256=win-1256-arabic 1257=win-1257-baltic 1258=win-1258-vietnamese 1361=win-1361-korean-johab 10000=apple-roman 10001=apple-japanese 10002=apple-chinese-traditional 10003=apple-korean 10004=apple-arabic 10005=apple-hebrew 10006=apple-greek 10007=apple-cyrillic 10008=apple-chinese-simplified 10010=apple-romanian 10017=apple-ukrainian 10029=apple-central-european-with-euro 10079=apple-icelandic 10081=apple-turkish 10082=apple-croatian 20127=ascii 20866=koi8-r 21866=koi8-u 28591=iso-8859-1 28592=iso-8859-2 28593=iso-8859-3 28594=iso-8859-4 28595=iso-8859-5 28596=iso-8859-6 28597=iso-8859-7 28598=iso-8859-8 28599=iso-8859-9 28605=iso-8859-15 32768=apple-romanian 32769=win-1252-latin-1 50220=iso-2022-jp 50225=iso-2022-kr 51932=euc-jp 51936=euc-cn 51949=euc-kr 65000=utf-7 65001=utf-8 end multilist=COUNTRY 1=usa,canada,latin-america,,,,russia 20=egypt 30=greece,netherlands,belgium,france,spain,,hungary,,,italy 40=,switzerland,,austria,uk,denmark,sweden,norway,poland,germany 50=,,mexico,,,brazil 60=,australia,,,new-zealand,,thailand 80=,japan,korea,,vietnam,,china 90=turkey 210=,,,algeria,,,morocco,,libya 350=,portugal,,,iceland,,,,finland 420=czech 880=,,,,,,taiwan 960=,lebanon,jordan,syria,iraq,kuwait,saudi-arabia 970=,uae,israel,,qatar 980=,iran end multilist=SYSTEMCOLOR 0x00=scrollbar,desktop,active-title,inactive-title,menu,window-back,window-frame,menu-text 0x08=window-text,active-title-text,active-border,inactive-border,app-workspace,highlight,highlight-text,button-face 0x10=button-shadow,disabled-text,button-text,inactive-title-text,button-highlight,button-dark-shadow,button-light-shadow,tooltip-text 0x18=tooltip-back,,hot-light,active-title-2,inactive-title-2,menu-highlight,menubar end # ============================================================================