APACHE INSTALLATION Introduction ============ Apache 2.0's configuration and installation environment has changed completely from Apache 1.3. Apache 1.3 used a custom set of scripts to achieve easy installation. Apache 2.0 now uses libtool and autoconf to create an environment that looks like many other Open Source projects. Installing the Apache 2.0 HTTP server ===================================== 1. Overview for the impatient -------------------------- $ ./configure --prefix=PREFIX $ make $ make install $ PREFIX/bin/apachectl start NOTE: PREFIX is not the string "PREFIX". Instead use the Unix filesystem path under which Apache should be installed. For instance use "/usr/local/apache" for PREFIX above. NOTE: if you are building from a copy of the Apache CVS repository, rather than a release distribution, then you must use the "buildconf" script before running configure. NOTE: If you are building on FreeBSD, you should add the argument --with-mpm=prefork to the configure line. The Apache Group has discovered that threads do not work well with Apache on FreeBSD. For that reason, we disable threads by default on FreeBSD, and you need to build the prefork MPM. If you wish to try to make threads work on FreeBSD, they can be re-enabled by using --enable-threads 2. Requirements ------------ The following requirements exist for building Apache: o Disk Space: Make sure you have approximately 12 MB of temporary free disk space available. After installation Apache occupies approximately 5 MB of disk space (the actual required disk space depends on the amount of compiled in third party modules, etc). o ANSI-C Compiler: Make sure you have an ANSI-C compiler installed. The GNU C compiler (GCC) from the Free Software Foundation (FSF) is recommended (version 2.7.2 is fine). If you don't have GCC then at least make sure your vendors compiler is ANSI compliant. You can find the homepage of GNU at http://www.gnu.org/ and the GCC distribution under http://www.gnu.org/order/ftp.html . o Perl 5 Interpreter [OPTIONAL]: For some of the support scripts like `apxs' or `dbmmanage' (which are written in Perl) the Perl 5 interpreter is required (versions 5.003 and 5.004 are fine). If no such interpreter is found by the `configure' script this is no harm. Of course, you still can build and install Apache 2.0. Only those support scripts cannot be used. If you have multiple Perl interpreters installed (perhaps a Perl 4 from the vendor and a Perl 5 from your own), then it is recommended to use the --with-perl option (see below) to make sure the correct one is selected by ./configure. o Dynamic Shared Object (DSO) support [OPTIONAL]: To provide maximum flexibility Apache now is able to load modules under runtime via the DSO mechanism by using the pragmatic apr_dso_open()/apr_dso_sym() calls. These calls are not available under all operating systems therefore you cannot use the DSO mechanism on all platforms. Apache relies on autoconf to detect the ability to use DSOs, and libtool to determine how to build DSOs. If your platform is supported by libtool, and we can find DSO system calls, then DSOs should work out-of-the-box. If your system is not on these lists but has the dlopen-style interface, you either have to provide the appropriate compiler and linker flags (see CFLAGS_SHLIB, LDFLAGS_SHLIB and LDFLAGS_SHLIB_EXPORT below) manually or at least make sure a Perl 5 interpreter is installed from which Apache can guess the options. If you are building from a copy of the CVS repository, rather than a release distribution, then you will need these additional tools: o Libtool 1.3.3: Make sure that you have libtool 1.3.3 or later installed before trying to configure and build Apache 2.0. Libtool can be downloaded from the Free Software Foundation (FSF), at http://www.gnu.org/order/ftp.html. o Autoconf 2.13: Make sure that you have autoconf 2.13 or later installed before trying to configure and build Apache 2.0. Autoconf can be downloaded from the Free Software Foundation (FSF), at http://www.gnu.org/order/ftp.html. 3. Configuring the source tree --------------------------- Setup: If you have downloading the Apache 2.0 from the CVS, rather than a release distribution, then you will need to prepare the source tree for configuration and compilation. This is done by running: ./buildconf This script ensures that all required programs are installed on the currently machine, and creates the ./configure script. If you are using a package downloaded from apache.org then this step is not necessary. Introduction: The next step is to configure the Apache source tree for your particular platform and personal requirements. The most important setup here is the location prefix where Apache is to be installed later, because Apache has to be configured for this location to work correctly. But there are a lot of other options available for your pleasure. For a short impression of what possibilities you have, here is a typical example which compiles Apache for the installation tree /sw/pkg/apache with a particular compiler and flags plus the two additional modules mod_rewrite and mod_speling for later loading through the DSO mechanism: $ CC="pgcc" OPTIM="-O2" \ ./configure --prefix=/sw/pkg/apache \ --enable-rewrite=shared \ --enable-speling=shared The easiest way to find all of the configuration flags for Apache 2.0 is to run ./configure --help. What follows is a brief description of most of the arguments. Reference: $ [CC=...] [CFLAGS_SHLIB=...] [TARGET=...] [OPTIM=...] [LD_SHLIB=...] [CFLAGS=...] [LDFLAGS_SHLIB=...] [INCLUDES=...] [LDFLAGS_SHLIB_EXPORT=...] [LDFLAGS=...] [RANLIB=...] [LIBS=...] [DEPS=...] [NOTEST_CFLAGS=...] [NOTEST_LDFLAGS=...] ./configure [--quiet] [--prefix=DIR] [--enable-NAME=(shared)] [--verbose] [--exec-prefix=PREFIX] [--disable-NAME] [--shadow[=DIR]] [--bindir=EPREFIX] [--with-mpm=NAME] [--show-layout] [--sbindir=DIR] [--help] [--libexecdir=DIR] [--mandir=DIR] [--sysconfdir=DIR] [--datadir=DIR] [--includedir=DIR] [--localstatedir=DIR] [--runtimedir=DIR] [--enable-suexec] [--logfiledir=DIR] [--suexec-caller=UID] [--proxycachedir=DIR] [--suexec-docroot=DIR] [--with-layout=[FILE:]ID] [--suexec-logfile=FILE] [--suexec-userdir=DIR] [--with-perl=FILE] [--suexec-uidmin=UID] [--without-support] [--suexec-gidmin=GID] [--without-confadjust] [--suexec-safepath=PATH] [--without-execstrip] [--server-uid=UID] [--with-maintainter-mode] [--server-gid=GID] Use the CC, OPTIM, CFLAGS, INCLUDES, LDFLAGS, LIBS, CFLAGS_SHLIB, LD_SHLIB, LDFLAGS_SHLIB, LDFLAGS_SHLIB_EXPORT, RANLIB, DEPS and TARGET environment variables to override and expand the corresponding default entries as determined by configure. Use NOTEST_CFLAGS and NOTEST_LDFLAGS to add entries that should be used only during the actual build and compilation of Apache, such as -Werror. Use the --prefix=PREFIX and --exec-prefix=EPREFIX options to configure Apache to use a particular installation prefix. The default is PREFIX=/usr/local/apache and EPREFIX=PREFIX. Use the --bindir=DIR, --sbindir=DIR, --libexecdir=DIR, --mandir=DIR, --sysconfdir=DIR, --datadir=DIR, --iconsdir=DIR, --htdocsdir=DIR, --cgidir=DIR, --includedir=DIR, --localstatedir=DIR, --runtimedir=DIR, --logfiledir=DIR and --proxycachedir=DIR option to change the paths for particular subdirectories of the installation tree. Defaults are bindir=EPREFIX/bin, sbindir=EPREFIX/bin, libexecdir=EPREFIX/modules, mandir=PREFIX/man, sysconfdir=PREFIX/conf, datadir=PREFIX, iconsdir=PREFIX/icons, htdocsdir=PREFIX/htdocs, cgidir=PREFIX/cgi-bin, includedir=PREFIX/include, localstatedir=PREFIX, runtimedir=PREFIX/logs, logfiledir=PREFIX/logs and proxycachedir=PREFIX/proxy. Note: To reduce the pollution of shared installation locations (like /usr/local/ or /etc) with Apache files to a minimum the string ``/apache'' is automatically appended to 'libexecdir', 'sysconfdir', 'datadir', 'localstatedir' and 'includedir' if (and only if) the following points apply for each path individually: 1. the path doesn't already contain the word ``apache'' 2. the path was not directly customized by the user Keep in mind that per default these paths are derived from 'prefix' and 'exec-prefix', so usually its only a matter whether these paths contain ``apache'' or not. Although the defaults were defined with experience in mind you always should make sure the paths fit your situation by checking the finally chosen paths via the --layout option. Use the --with-layout=[F:]ID option to select a particular installation path base-layout. You always _HAVE_ to select a base-layout. There are currently two layouts pre-defined in the file config.layout: `Apache' for the classical Apache path layout and `GNU' for a path layout conforming to the GNU `standards' document. When you want to use your own custom layout FOO, either add a corresponding "..." section to config.layout and use --with-layout=FOO or place it into your own file, say config.mypaths, and use --with-layout=config.mypaths:FOO. Use the --show-layout option to check the final installation path layout while fiddling with the options above. Use the --enable-NAME=(shared) and --disable-NAME options to enable or disable a particular already distributed module from the Apache package. Use the --with-mpm=NAME option to determine which MPM should be built for your server. _________________________________________________________________________ LIST OF AVAILABLE MODULES Environment creation (+) mod_env .......... Set environment variables for CGI/SSI scripts (+) mod_setenvif ..... Set environment variables based on HTTP headers (-) mod_unique_id .... Generate unique identifiers for request Content type decisions (+) mod_mime ......... Content type/encoding determination (configured) (-) mod_mime_magic ... Content type/encoding determination (automatic) (+) mod_negotiation .. Content selection based on the HTTP Accept* headers URL mapping (+) mod_alias ........ Simple URL translation and redirection (-) mod_rewrite ...... Advanced URL translation and redirection (+) mod_userdir ...... Selection of resource directories by username (-) mod_speling ...... Correction of misspelled URLs Directory Handling (+) mod_dir .......... Directory and directory default file handling (+) mod_autoindex .... Automated directory index file generation Access Control and Authentication (+) mod_access ....... Access Control (user, host, network) (+) mod_auth ......... HTTP Basic Authentication (user, passwd) (-) mod_auth_dbm ..... HTTP Basic Authentication via Unix NDBM files (-) mod_auth_db ...... HTTP Basic Authentication via Berkeley-DB files (-) mod_auth_anon .... HTTP Basic Authentication for Anonymous-style users (-) mod_digest ....... HTTP Digest Authentication HTTP response (-) mod_headers ...... Arbitrary HTTP response headers (configured) (-) mod_cern_meta .... Arbitrary HTTP response headers (CERN-style files) (-) mod_expires ...... Expires HTTP responses (+) mod_asis ......... Raw HTTP responses Scripting (+) mod_include ...... Server Side Includes (SSI) support (+) mod_cgi .......... Common Gateway Interface (CGI) support (+) mod_cgid ......... Common Gateway Interface (CGI) support for multi-threaded MPMs (+) mod_actions ...... Map CGI scripts to act as internal `handlers' Internal Content Handlers (+) mod_status ....... Content handler for server run-time status (-) mod_info ......... Content handler for server configuration summary Request Logging (+) mod_log_config ... Customizable logging of requests (-) mod_usertrack .... Logging of user click-trails via HTTP Cookies Content Management (-) mod_dav .......... WebDAV (RFC 2518) support for Apache (-) mod_dav_fs ....... mod_dav backend to managing filesystem content Miscellaneous (+) mod_imap ......... Server-side Image Map support (-) mod_proxy ........ Caching Proxy Module (HTTP, HTTPS, FTP) (-) mod_so ........... Dynamic Shared Object (DSO) bootstrapping Experimental (-) mod_mmap_static .. Caching of frequently served pages via mmap() Development (-) mod_example ...... Apache API demonstration (developers only) MPMs mpmt_pthread ..... Multi-process(dynamic) Multi-threaded(static) Unix MPM prefork .......... Preforking Unix MPM perchild ......... Multi-process(static) Multi-threaded(dynamic) Unix MPM, that allows a User per child process winnt ............ Multi-process(1) Multi-threaded Windows MPM mpmt_beos ........ Multi-process Multi-threaded Beos MPM beos ............. Multi-process Multi-threaded Beos MPM spmt_os2 ......... Single-process Multi-threaded OS/2 MPM _________________________________________________________________________ (+) = enabled per default [disable with --disable-module] (-) = disabled per default [enable with --enable-module ] Use the --enable-suexec option to enable the suEXEC feature by building and installing the "suexec" support program. CAUTION: FOR DETAILS ABOUT THE SUEXEC FEATURE WE HIGHLY RECOMMEND YOU TO FIRST READ THE DOCUMENT htdocs/manual/suexec.html BEFORE USING THE ABOVE OPTIONS. USING THE SUEXEC FEATURE PROPERLY CAN REDUCE CONSIDERABLY THE SECURITY RISKS INVOLVED WITH ALLOWING USERS TO DEVELOP AND RUN PRIVATE CGI OR SSI PROGRAMS. HOWEVER, IF SUEXEC IS IMPROPERLY CONFIGURED, IT CAN CAUSE ANY NUMBER OF PROBLEMS AND POSSIBLY CREATE NEW HOLES IN YOUR COMPUTER'S SECURITY. IF YOU AREN'T FAMILIAR WITH MANAGING SETUID ROOT PROGRAMS AND THE SECURITY ISSUES THEY PRESENT, WE HIGHLY RECOMMEND THAT YOU NOT CONSIDER USING SUEXEC AND KEEP AWAY FROM THESE OPTIONS! Use the --quiet option to disable all configuration verbose messages. 4. Building the package -------------------- Now you can build the various parts which form the Apache package by simply running the command: $ make Please be patient here, this takes approximately 2 minutes to complete under a Pentium-166/FreeBSD-2.2 system, dependend on the amount of modules you have enabled. 5. Installing the package ---------------------- Now its time to install the package under the configured installation PREFIX (see --prefix option above) by running: $ make install For the paranoid hackers under us: The above command really installs under prefix _only_, i.e. no other stuff from your system is touched. Even if you upgrade an existing installation your configuration files in PREFIX/conf/ are preserved. 6. Testing the package ------------------- Now you can fire up your Apache HTTP server by immediately running: $ PREFIX/bin/apachectl start and then you should be able to request your first document via URL http://localhost/ (when you built and installed Apache as root or at least used the --without-confadjust option) or http://localhost:8080/ (when you built and installed Apache as a regular user). Then stop the server again by running: $ PREFIX/bin/apachectl stop 7. Customizing the package ----------------------- Finally you can customize your Apache HTTP server by editing the configuration files under PREFIX/conf/. $ vi PREFIX/conf/httpd.conf Have a look at the Apache manual under docs/manual/ or http://httpd.apache.org/docs/ for a complete reference of available configuration directives. 8. Preparing the system -------------------- Proper operation of a public HTTP server requires at least the following: 1. A correctly working TCP/IP layer, since HTTP is implemented on top of TCP/IP. Although modern Unix platforms have good networking layers, always make sure you have all official vendor patches referring to the network layer applied. 2. Accurate time keeping, since elements of the HTTP protocol are expressed as the time of day. So, it's time to investigate setting some time synchronization facility on your system. Usually the ntpdate or xntpd programs are used for this purpose which are based on the Network Time Protocol (NTP). See the Usenet newsgroup comp.protocols.time.ntp and the NTP homepage at http://www.eecis.udel.edu/~ntp/ for more details about NTP software and public time servers. 9. Contacts -------- o If you want to be informed about new code releases, bug fixes, security fixes, general news and information about the Apache server subscribe to the apache-announce mailing list as described under http://httpd.apache.org/announcelist.html o If you want freely available support for running Apache please join the Apache user community by subscribing at least to the following USENET newsgroup: comp.infosystems.www.servers.unix o If you want commercial support for running Apache please contact one of the companies and contractors which are listed at http://httpd.apache.org/info/support.cgi o If you have a concrete bug report for Apache please go to the Apache Group Bug Database and submit your report: http://httpd.apache.org/bug_report.html o If you want to participate in actively developing Apache please subscribe to the `new-httpd' mailing list as described at http://www.apache.org/foundation/mailinglists.html Thanks for running Apache. The Apache Group http://www.apache.org/