The following document contains the results of Checkstyle.
Rules | Violations | Severity |
---|---|---|
JavadocPackage
| 0 | ![]() |
NewlineAtEndOfFile | 0 | ![]() |
Translation | 0 | ![]() |
FileLength | 0 | ![]() |
FileTabCharacter
| 0 | ![]() |
RegexpSingleline
| 0 | ![]() |
JavadocMethod | 486 | ![]() |
JavadocType | 0 | ![]() |
JavadocVariable | 0 | ![]() |
JavadocStyle | 2092 | ![]() |
ConstantName | 0 | ![]() |
LocalFinalVariableName | 0 | ![]() |
LocalVariableName | 0 | ![]() |
MemberName | 0 | ![]() |
MethodName | 0 | ![]() |
PackageName | 0 | ![]() |
ParameterName | 0 | ![]() |
StaticVariableName | 50 | ![]() |
TypeName | 0 | ![]() |
AvoidStarImport | 0 | ![]() |
IllegalImport | 0 | ![]() |
RedundantImport | 0 | ![]() |
UnusedImports | 0 | ![]() |
LineLength | 0 | ![]() |
MethodLength | 10 | ![]() |
ParameterNumber | 0 | ![]() |
EmptyForIteratorPad | 0 | ![]() |
MethodParamPad | 4 | ![]() |
NoWhitespaceAfter | 4 | ![]() |
NoWhitespaceBefore | 0 | ![]() |
OperatorWrap | 2020 | ![]() |
ParenPad | 0 | ![]() |
TypecastParenPad | 0 | ![]() |
WhitespaceAfter | 4 | ![]() |
WhitespaceAround | 0 | ![]() |
ModifierOrder | 0 | ![]() |
RedundantModifier | 0 | ![]() |
AvoidNestedBlocks | 0 | ![]() |
EmptyBlock | 0 | ![]() |
LeftCurly | 0 | ![]() |
NeedBraces | 0 | ![]() |
RightCurly | 0 | ![]() |
AvoidInlineConditionals | 56 | ![]() |
DoubleCheckedLocking | 0 | ![]() |
EmptyStatement | 0 | ![]() |
EqualsHashCode | 0 | ![]() |
HiddenField | 370 | ![]() |
IllegalInstantiation | 0 | ![]() |
InnerAssignment | 0 | ![]() |
MagicNumber | 238 | ![]() |
MissingSwitchDefault | 0 | ![]() |
RedundantThrows | 0 | ![]() |
SimplifyBooleanExpression | 0 | ![]() |
SimplifyBooleanReturn | 0 | ![]() |
DesignForExtension | 1498 | ![]() |
FinalClass | 28 | ![]() |
HideUtilityClassConstructor | 0 | ![]() |
InterfaceIsType | 0 | ![]() |
VisibilityModifier | 50 | ![]() |
ArrayTypeStyle | 0 | ![]() |
FinalParameters | 2100 | ![]() |
TodoComment | 6 | ![]() |
UpperEll | 0 | ![]() |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 56 |
![]() | First sentence should end with a period. | 58 |
![]() | '+' should be on a new line. | 76 |
![]() | '+' should be on a new line. | 89 |
![]() | '+' should be on a new line. | 90 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 95 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 100 |
![]() | Parameter conf should be final. | 101 |
![]() | 'conf' hides a field. | 101 |
![]() | First sentence should end with a period. | 105 |
![]() | Method 'run' is not designed for extension - needs to be abstract, final or empty. | 128 |
![]() | Parameter args should be final. | 129 |
![]() | '+' should be on a new line. | 172 |
![]() | '+' should be on a new line. | 182 |
![]() | ':' should be on a new line. | 210 |
![]() | '+' should be on a new line. | 215 |
![]() | '+' should be on a new line. | 219 |
![]() | '100.0f' is a magic number. | 233 |
![]() | Avoid inline conditionals. | 237 |
![]() | Parameter args should be final. | 246 |
![]() | First sentence should end with a period. | 56 |
![]() | First sentence should end with a period. | 58 |
![]() | '+' should be on a new line. | 76 |
![]() | '+' should be on a new line. | 89 |
![]() | '+' should be on a new line. | 90 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 95 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 100 |
![]() | Parameter conf should be final. | 101 |
![]() | 'conf' hides a field. | 101 |
![]() | First sentence should end with a period. | 105 |
![]() | Method 'run' is not designed for extension - needs to be abstract, final or empty. | 128 |
![]() | Parameter args should be final. | 129 |
![]() | '+' should be on a new line. | 172 |
![]() | '+' should be on a new line. | 182 |
![]() | ':' should be on a new line. | 210 |
![]() | '+' should be on a new line. | 215 |
![]() | '+' should be on a new line. | 219 |
![]() | '100.0f' is a magic number. | 233 |
![]() | Avoid inline conditionals. | 237 |
![]() | Parameter args should be final. | 246 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 33 |
![]() | Method 'getAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 44 |
![]() | Method 'setAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 49 |
![]() | Parameter value should be final. | 50 |
![]() | 'value' hides a field. | 50 |
![]() | Method 'reset' is not designed for extension - needs to be abstract, final or empty. | 54 |
![]() | First sentence should end with a period. | 33 |
![]() | Method 'getAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 44 |
![]() | Method 'setAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 49 |
![]() | Parameter value should be final. | 50 |
![]() | 'value' hides a field. | 50 |
![]() | Method 'reset' is not designed for extension - needs to be abstract, final or empty. | 54 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 28 |
![]() | Parameter value should be final. | 29 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 33 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 28 |
![]() | Parameter value should be final. | 29 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 33 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 28 |
![]() | Parameter value should be final. | 29 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 33 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 28 |
![]() | Parameter value should be final. | 29 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 33 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 32 |
![]() | Parameter value should be final. | 33 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 37 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 32 |
![]() | Parameter value should be final. | 33 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 37 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 33 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 33 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 33 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 33 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 31 |
![]() | Parameter value should be final. | 32 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 36 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 31 |
![]() | Parameter value should be final. | 32 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 36 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 32 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 32 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 25 |
![]() | Parameter value should be final. | 26 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 30 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 25 |
![]() | Parameter value should be final. | 26 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 30 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 33 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 33 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 33 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 33 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 30 |
![]() | Parameter value should be final. | 31 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 35 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 30 |
![]() | Parameter value should be final. | 31 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 35 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 32 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 32 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 32 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 32 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 33 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 33 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 33 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 33 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 30 |
![]() | Parameter value should be final. | 31 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 35 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 30 |
![]() | Parameter value should be final. | 31 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 35 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 32 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 32 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 32 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 32 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 33 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 33 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 33 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 33 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 30 |
![]() | Parameter value should be final. | 31 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 35 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 30 |
![]() | Parameter value should be final. | 31 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 35 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 32 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 32 |
Violation | Message | Line |
---|---|---|
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 32 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 27 |
![]() | Parameter value should be final. | 28 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 32 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 26 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 33 |
![]() | Parameter messages should be final. | 34 |
![]() | First sentence should end with a period. | 26 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 33 |
![]() | Parameter messages should be final. | 34 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 27 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 34 |
![]() | Parameter messages should be final. | 35 |
![]() | First sentence should end with a period. | 27 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 34 |
![]() | Parameter messages should be final. | 35 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 45 |
![]() | First sentence should end with a period. | 47 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 50 |
![]() | Parameter messages should be final. | 51 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 55 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 60 |
![]() | Parameter conf should be final. | 61 |
![]() | 'conf' hides a field. | 61 |
![]() | '+' should be on a new line. | 114 |
![]() | '||' should be on a new line. | 121 |
![]() | '+' should be on a new line. | 127 |
![]() | '100.0f' is a magic number. | 130 |
![]() | First sentence should end with a period. | 45 |
![]() | First sentence should end with a period. | 47 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 50 |
![]() | Parameter messages should be final. | 51 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 55 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 60 |
![]() | Parameter conf should be final. | 61 |
![]() | 'conf' hides a field. | 61 |
![]() | '+' should be on a new line. | 114 |
![]() | '||' should be on a new line. | 121 |
![]() | '+' should be on a new line. | 127 |
![]() | '100.0f' is a magic number. | 130 |
Violation | Message | Line |
---|---|---|
![]() | Class PageRankComputation should be declared as final. | 28 |
![]() | First sentence should end with a period. | 29 |
![]() | Parameter vertex should be final. | 45 |
![]() | Parameter messages should be final. | 46 |
![]() | '0.15f' is a magic number. | 53 |
![]() | '0.85f' is a magic number. | 53 |
![]() | Class PageRankComputation should be declared as final. | 28 |
![]() | First sentence should end with a period. | 29 |
![]() | Parameter vertex should be final. | 45 |
![]() | Parameter messages should be final. | 46 |
![]() | '0.15f' is a magic number. | 53 |
![]() | '0.85f' is a magic number. | 53 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 46 |
![]() | First sentence should end with a period. | 49 |
![]() | First sentence should end with a period. | 52 |
![]() | First sentence should end with a period. | 54 |
![]() | First sentence should end with a period. | 57 |
![]() | First sentence should end with a period. | 59 |
![]() | First sentence should end with a period. | 62 |
![]() | First sentence should end with a period. | 64 |
![]() | First sentence should end with a period. | 67 |
![]() | First sentence should end with a period. | 69 |
![]() | First sentence should end with a period. | 72 |
![]() | First sentence should end with a period. | 74 |
![]() | First sentence should end with a period. | 76 |
![]() | First sentence should end with a period. | 79 |
![]() | First sentence should end with a period. | 87 |
![]() | First sentence should end with a period. | 90 |
![]() | First sentence should end with a period. | 92 |
![]() | First sentence should end with a period. | 94 |
![]() | First sentence should end with a period. | 96 |
![]() | First sentence should end with a period. | 98 |
![]() | First sentence should end with a period. | 100 |
![]() | First sentence should end with a period. | 102 |
![]() | First sentence should end with a period. | 104 |
![]() | '1000d' is a magic number. | 143 |
![]() | '1024d' is a magic number. | 143 |
![]() | '1024d' is a magic number. | 143 |
![]() | '*' should be on a new line. | 144 |
![]() | '1000d' is a magic number. | 145 |
![]() | '1024d' is a magic number. | 145 |
![]() | '1024d' is a magic number. | 145 |
![]() | '1000d' is a magic number. | 147 |
![]() | '1000d' is a magic number. | 149 |
![]() | '+' should be on a new line. | 159 |
![]() | '+' should be on a new line. | 161 |
![]() | '+' should be on a new line. | 163 |
![]() | '+' should be on a new line. | 165 |
![]() | '+' should be on a new line. | 167 |
![]() | '+' should be on a new line. | 169 |
![]() | '+' should be on a new line. | 171 |
![]() | '+' should be on a new line. | 173 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 233 |
![]() | First sentence should end with a period. | 247 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 252 |
![]() | Parameter messages should be final. | 253 |
![]() | '*' should be on a new line. | 261 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 273 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 278 |
![]() | Parameter conf should be final. | 279 |
![]() | 'conf' hides a field. | 279 |
![]() | Method 'run' is not designed for extension - needs to be abstract, final or empty. | 283 |
![]() | Parameter args should be final. | 284 |
![]() | '+' should be on a new line. | 341 |
![]() | '100.0f' is a magic number. | 360 |
![]() | Parameter args should be final. | 402 |
![]() | First sentence should end with a period. | 46 |
![]() | First sentence should end with a period. | 49 |
![]() | First sentence should end with a period. | 52 |
![]() | First sentence should end with a period. | 54 |
![]() | First sentence should end with a period. | 57 |
![]() | First sentence should end with a period. | 59 |
![]() | First sentence should end with a period. | 62 |
![]() | First sentence should end with a period. | 64 |
![]() | First sentence should end with a period. | 67 |
![]() | First sentence should end with a period. | 69 |
![]() | First sentence should end with a period. | 72 |
![]() | First sentence should end with a period. | 74 |
![]() | First sentence should end with a period. | 76 |
![]() | First sentence should end with a period. | 79 |
![]() | First sentence should end with a period. | 87 |
![]() | First sentence should end with a period. | 90 |
![]() | First sentence should end with a period. | 92 |
![]() | First sentence should end with a period. | 94 |
![]() | First sentence should end with a period. | 96 |
![]() | First sentence should end with a period. | 98 |
![]() | First sentence should end with a period. | 100 |
![]() | First sentence should end with a period. | 102 |
![]() | First sentence should end with a period. | 104 |
![]() | '1000d' is a magic number. | 143 |
![]() | '1024d' is a magic number. | 143 |
![]() | '1024d' is a magic number. | 143 |
![]() | '*' should be on a new line. | 144 |
![]() | '1000d' is a magic number. | 145 |
![]() | '1024d' is a magic number. | 145 |
![]() | '1024d' is a magic number. | 145 |
![]() | '1000d' is a magic number. | 147 |
![]() | '1000d' is a magic number. | 149 |
![]() | '+' should be on a new line. | 159 |
![]() | '+' should be on a new line. | 161 |
![]() | '+' should be on a new line. | 163 |
![]() | '+' should be on a new line. | 165 |
![]() | '+' should be on a new line. | 167 |
![]() | '+' should be on a new line. | 169 |
![]() | '+' should be on a new line. | 171 |
![]() | '+' should be on a new line. | 173 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 233 |
![]() | First sentence should end with a period. | 247 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 252 |
![]() | Parameter messages should be final. | 253 |
![]() | '*' should be on a new line. | 261 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 273 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 278 |
![]() | Parameter conf should be final. | 279 |
![]() | 'conf' hides a field. | 279 |
![]() | Method 'run' is not designed for extension - needs to be abstract, final or empty. | 283 |
![]() | Parameter args should be final. | 284 |
![]() | '+' should be on a new line. | 341 |
![]() | '100.0f' is a magic number. | 360 |
![]() | Parameter args should be final. | 402 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 45 |
![]() | First sentence should end with a period. | 48 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 51 |
![]() | Parameter messages should be final. | 52 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 56 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 61 |
![]() | Parameter conf should be final. | 62 |
![]() | 'conf' hides a field. | 62 |
![]() | '+' should be on a new line. | 107 |
![]() | '||' should be on a new line. | 114 |
![]() | '+' should be on a new line. | 120 |
![]() | '100.0f' is a magic number. | 124 |
![]() | First sentence should end with a period. | 45 |
![]() | First sentence should end with a period. | 48 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 51 |
![]() | Parameter messages should be final. | 52 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 56 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 61 |
![]() | Parameter conf should be final. | 62 |
![]() | 'conf' hides a field. | 62 |
![]() | '+' should be on a new line. | 107 |
![]() | '||' should be on a new line. | 114 |
![]() | '+' should be on a new line. | 120 |
![]() | '100.0f' is a magic number. | 124 |
Violation | Message | Line |
---|---|---|
![]() | Class ShortestPathsComputation should be declared as final. | 29 |
![]() | Parameter vertex should be final. | 44 |
![]() | '==' should be on a new line. | 46 |
![]() | Parameter vertex should be final. | 58 |
![]() | Parameter messages should be final. | 60 |
![]() | Avoid inline conditionals. | 65 |
![]() | Class ShortestPathsComputation should be declared as final. | 29 |
![]() | Parameter vertex should be final. | 44 |
![]() | '==' should be on a new line. | 46 |
![]() | Parameter vertex should be final. | 58 |
![]() | Parameter messages should be final. | 60 |
![]() | Avoid inline conditionals. | 65 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 18 |
![]() | First sentence should end with a period. | 18 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 21 |
![]() | First sentence should end with a period. | 25 |
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 29 |
![]() | First sentence should end with a period. | 31 |
![]() | First sentence should end with a period. | 21 |
![]() | First sentence should end with a period. | 25 |
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 29 |
![]() | First sentence should end with a period. | 31 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 42 |
![]() | First sentence should end with a period. | 45 |
![]() | Parameter conf should be final. | 51 |
![]() | '+' should be on a new line. | 64 |
![]() | '+' should be on a new line. | 65 |
![]() | Method 'getSplits' is not designed for extension - needs to be abstract, final or empty. | 71 |
![]() | Parameter context should be final. | 72 |
![]() | Method 'createRecordReader' is not designed for extension - needs to be abstract, final or empty. | 87 |
![]() | Parameter split should be final. | 89 |
![]() | Parameter context should be final. | 89 |
![]() | First sentence should end with a period. | 42 |
![]() | First sentence should end with a period. | 45 |
![]() | Parameter conf should be final. | 51 |
![]() | '+' should be on a new line. | 64 |
![]() | '+' should be on a new line. | 65 |
![]() | Method 'getSplits' is not designed for extension - needs to be abstract, final or empty. | 71 |
![]() | Parameter context should be final. | 72 |
![]() | Method 'createRecordReader' is not designed for extension - needs to be abstract, final or empty. | 87 |
![]() | Parameter split should be final. | 89 |
![]() | Parameter context should be final. | 89 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 35 |
![]() | First sentence should end with a period. | 37 |
![]() | Parameter splitIndex should be final. | 51 |
![]() | 'splitIndex' hides a field. | 51 |
![]() | Parameter numSplits should be final. | 51 |
![]() | 'numSplits' hides a field. | 51 |
![]() | Method 'getLength' is not designed for extension - needs to be abstract, final or empty. | 56 |
![]() | Method 'getLocations' is not designed for extension - needs to be abstract, final or empty. | 61 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 66 |
![]() | Parameter in should be final. | 67 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 72 |
![]() | Parameter out should be final. | 73 |
![]() | Method 'getSplitIndex' is not designed for extension - needs to be abstract, final or empty. | 83 |
![]() | Method 'getNumSplits' is not designed for extension - needs to be abstract, final or empty. | 92 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 96 |
![]() | '+' should be on a new line. | 98 |
![]() | First sentence should end with a period. | 35 |
![]() | First sentence should end with a period. | 37 |
![]() | Parameter splitIndex should be final. | 51 |
![]() | 'splitIndex' hides a field. | 51 |
![]() | Parameter numSplits should be final. | 51 |
![]() | 'numSplits' hides a field. | 51 |
![]() | Method 'getLength' is not designed for extension - needs to be abstract, final or empty. | 56 |
![]() | Method 'getLocations' is not designed for extension - needs to be abstract, final or empty. | 61 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 66 |
![]() | Parameter in should be final. | 67 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 72 |
![]() | Parameter out should be final. | 73 |
![]() | Method 'getSplitIndex' is not designed for extension - needs to be abstract, final or empty. | 83 |
![]() | Method 'getNumSplits' is not designed for extension - needs to be abstract, final or empty. | 92 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 96 |
![]() | '+' should be on a new line. | 98 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 37 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 38 |
![]() | Method 'checkOutputSpecs' is not designed for extension - needs to be abstract, final or empty. | 40 |
![]() | Parameter context should be final. | 41 |
![]() | '==' should be on a new line. | 43 |
![]() | '+' should be on a new line. | 45 |
![]() | Method 'getOutputCommitter' is not designed for extension - needs to be abstract, final or empty. | 53 |
![]() | Parameter context should be final. | 54 |
![]() | '==' should be on a new line. | 56 |
![]() | '+' should be on a new line. | 58 |
![]() | Method 'getRecordWriter' is not designed for extension - needs to be abstract, final or empty. | 66 |
![]() | Parameter context should be final. | 67 |
![]() | First sentence should end with a period. | 37 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 38 |
![]() | Method 'checkOutputSpecs' is not designed for extension - needs to be abstract, final or empty. | 40 |
![]() | Parameter context should be final. | 41 |
![]() | '==' should be on a new line. | 43 |
![]() | '+' should be on a new line. | 45 |
![]() | Method 'getOutputCommitter' is not designed for extension - needs to be abstract, final or empty. | 53 |
![]() | Parameter context should be final. | 54 |
![]() | '==' should be on a new line. | 56 |
![]() | '+' should be on a new line. | 58 |
![]() | Method 'getRecordWriter' is not designed for extension - needs to be abstract, final or empty. | 66 |
![]() | Parameter context should be final. | 67 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 32 |
![]() | First sentence should end with a period. | 34 |
![]() | Avoid inline conditionals. | 47 |
![]() | Parameter inputSplit should be final. | 61 |
![]() | Parameter context should be final. | 61 |
![]() | First sentence should end with a period. | 32 |
![]() | First sentence should end with a period. | 34 |
![]() | Avoid inline conditionals. | 47 |
![]() | Parameter inputSplit should be final. | 61 |
![]() | Parameter context should be final. | 61 |
Violation | Message | Line |
---|---|---|
![]() | Parameter context should be final. | 35 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 40 |
![]() | Parameter key should be final. | 41 |
![]() | Parameter value should be final. | 41 |
![]() | '+' should be on a new line. | 43 |
![]() | '+' should be on a new line. | 44 |
![]() | Parameter context should be final. | 35 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 40 |
![]() | Parameter key should be final. | 41 |
![]() | Parameter value should be final. | 41 |
![]() | '+' should be on a new line. | 43 |
![]() | '+' should be on a new line. | 44 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 50 |
![]() | First sentence should end with a period. | 66 |
![]() | Expected @throws tag for 'IOException'. | 72 |
![]() | Expected @throws tag for 'InterruptedException'. | 72 |
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 50 |
![]() | First sentence should end with a period. | 66 |
![]() | Expected @throws tag for 'IOException'. | 72 |
![]() | Expected @throws tag for 'InterruptedException'. | 72 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 57 |
![]() | Expected @throws tag for 'KeeperException'. | 65 |
![]() | Expected @throws tag for 'InterruptedException'. | 65 |
![]() | First sentence should end with a period. | 75 |
![]() | Expected @throws tag for 'IOException'. | 81 |
![]() | First sentence should end with a period. | 57 |
![]() | Expected @throws tag for 'KeeperException'. | 65 |
![]() | Expected @throws tag for 'InterruptedException'. | 65 |
![]() | First sentence should end with a period. | 75 |
![]() | Expected @throws tag for 'IOException'. | 81 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 52 |
![]() | Expected @throws tag for 'IOException'. | 87 |
![]() | Expected @throws tag for 'IOException'. | 97 |
![]() | First sentence should end with a period. | 178 |
![]() | First sentence should end with a period. | 198 |
![]() | First sentence should end with a period. | 52 |
![]() | Expected @throws tag for 'IOException'. | 87 |
![]() | Expected @throws tag for 'IOException'. | 97 |
![]() | First sentence should end with a period. | 178 |
![]() | First sentence should end with a period. | 198 |
Violation | Message | Line |
---|---|---|
![]() | Parameter context should be final. | 34 |
![]() | Parameter context should be final. | 38 |
![]() | Method 'needsTaskCommit' is not designed for extension - needs to be abstract, final or empty. | 41 |
![]() | Parameter context should be final. | 42 |
![]() | Parameter context should be final. | 48 |
![]() | Parameter context should be final. | 52 |
![]() | Parameter jobContext should be final. | 61 |
![]() | Parameter context should be final. | 34 |
![]() | Parameter context should be final. | 38 |
![]() | Method 'needsTaskCommit' is not designed for extension - needs to be abstract, final or empty. | 41 |
![]() | Parameter context should be final. | 42 |
![]() | Parameter context should be final. | 48 |
![]() | Parameter context should be final. | 52 |
![]() | Parameter jobContext should be final. | 61 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 21 |
![]() | First sentence should end with a period. | 25 |
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 29 |
![]() | First sentence should end with a period. | 31 |
![]() | First sentence should end with a period. | 21 |
![]() | First sentence should end with a period. | 25 |
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 29 |
![]() | First sentence should end with a period. | 31 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 83 |
![]() | First sentence should end with a period. | 86 |
![]() | First sentence should end with a period. | 88 |
![]() | Variable 'conf' must be private and have accessor methods. | 89 |
![]() | First sentence should end with a period. | 90 |
![]() | First sentence should end with a period. | 92 |
![]() | First sentence should end with a period. | 94 |
![]() | First sentence should end with a period. | 96 |
![]() | First sentence should end with a period. | 98 |
![]() | First sentence should end with a period. | 100 |
![]() | First sentence should end with a period. | 102 |
![]() | First sentence should end with a period. | 104 |
![]() | First sentence should end with a period. | 106 |
![]() | First sentence should end with a period. | 108 |
![]() | First sentence should end with a period. | 110 |
![]() | First sentence should end with a period. | 122 |
![]() | First sentence should end with a period. | 126 |
![]() | First sentence should end with a period. | 155 |
![]() | First sentence should end with a period. | 161 |
![]() | First sentence should end with a period. | 163 |
![]() | First sentence should end with a period. | 165 |
![]() | First sentence should end with a period. | 180 |
![]() | First sentence should end with a period. | 184 |
![]() | First sentence should end with a period. | 187 |
![]() | Parameter idMessageMap should be final. | 193 |
![]() | Parameter peerConnection should be final. | 194 |
![]() | Parameter isProxy should be final. | 195 |
![]() | 'isProxy' hides a field. | 195 |
![]() | First sentence should end with a period. | 230 |
![]() | Parameter peerConnection should be final. | 243 |
![]() | 'peerConnection' hides a field. | 243 |
![]() | Parameter context should be final. | 244 |
![]() | 'context' hides a field. | 244 |
![]() | ':' should be on a new line. | 262 |
![]() | '+' should be on a new line. | 267 |
![]() | '<' should be on a new line. | 278 |
![]() | '+' should be on a new line. | 281 |
![]() | '+' should be on a new line. | 282 |
![]() | '+' should be on a new line. | 292 |
![]() | '||' should be on a new line. | 308 |
![]() | '<' should be on a new line. | 309 |
![]() | ':' should be on a new line. | 319 |
![]() | '+' should be on a new line. | 330 |
![]() | '100f' is a magic number. | 335 |
![]() | '/' should be on a new line. | 335 |
![]() | '1000f' is a magic number. | 338 |
![]() | '60f' is a magic number. | 338 |
![]() | '100f' is a magic number. | 340 |
![]() | '-' should be on a new line. | 340 |
![]() | '+' should be on a new line. | 342 |
![]() | '+' should be on a new line. | 343 |
![]() | '+' should be on a new line. | 344 |
![]() | '+' should be on a new line. | 345 |
![]() | '+' should be on a new line. | 346 |
![]() | '+' should be on a new line. | 347 |
![]() | '+' should be on a new line. | 348 |
![]() | '+' should be on a new line. | 349 |
![]() | '+' should be on a new line. | 357 |
![]() | First sentence should end with a period. | 378 |
![]() | Parameter peerConnection should be final. | 389 |
![]() | 'peerConnection' hides a field. | 389 |
![]() | Parameter destVertex should be final. | 389 |
![]() | 'destVertex' hides a field. | 389 |
![]() | '<' should be on a new line. | 412 |
![]() | '+' should be on a new line. | 415 |
![]() | '+' should be on a new line. | 416 |
![]() | Parameter context should be final. | 446 |
![]() | 'context' hides a field. | 446 |
![]() | Parameter service should be final. | 447 |
![]() | 'service' hides a field. | 447 |
![]() | Expected @throws tag for 'IOException'. | 448 |
![]() | Expected @throws tag for 'InterruptedException'. | 448 |
![]() | '10' is a magic number. | 491 |
![]() | '+' should be on a new line. | 494 |
![]() | '+' should be on a new line. | 506 |
![]() | '+' should be on a new line. | 507 |
![]() | '+' should be on a new line. | 520 |
![]() | '+' should be on a new line. | 528 |
![]() | '+' should be on a new line. | 536 |
![]() | '+' should be on a new line. | 537 |
![]() | '+' should be on a new line. | 538 |
![]() | Parameter addr should be final. | 549 |
![]() | Parameter destVertex should be final. | 549 |
![]() | Expected @throws tag for 'IOException'. | 560 |
![]() | 'jobId' hides a field. | 572 |
![]() | 'jobToken' hides a field. | 572 |
![]() | Expected @throws tag for 'IOException'. | 572 |
![]() | Method 'getPort' is not designed for extension - needs to be abstract, final or empty. | 579 |
![]() | Method 'setup' is not designed for extension - needs to be abstract, final or empty. | 583 |
![]() | First sentence should end with a period. | 595 |
![]() | 'jobId' hides a field. | 606 |
![]() | 'jobToken' hides a field. | 606 |
![]() | Expected @throws tag for 'IOException'. | 607 |
![]() | Expected @throws tag for 'InterruptedException'. | 607 |
![]() | Parameter jobId should be final. | 618 |
![]() | 'jobId' hides a field. | 618 |
![]() | Parameter jobToken should be final. | 618 |
![]() | 'jobToken' hides a field. | 618 |
![]() | Expected @throws tag for 'IOException'. | 619 |
![]() | Expected @throws tag for 'InterruptedException'. | 619 |
![]() | '+' should be on a new line. | 629 |
![]() | '+' should be on a new line. | 630 |
![]() | Parameter workerInfo should be final. | 648 |
![]() | Parameter jobId should be final. | 649 |
![]() | 'jobId' hides a field. | 649 |
![]() | Parameter jobToken should be final. | 650 |
![]() | 'jobToken' hides a field. | 650 |
![]() | Expected @throws tag for 'IOException'. | 650 |
![]() | Expected @throws tag for 'InterruptedException'. | 650 |
![]() | '+' should be on a new line. | 652 |
![]() | '+' should be on a new line. | 653 |
![]() | '+' should be on a new line. | 670 |
![]() | '+' should be on a new line. | 671 |
![]() | Parameter protocol should be final. | 694 |
![]() | Parameter clientVersion should be final. | 694 |
![]() | Method 'getProtocolSignature' is not designed for extension - needs to be abstract, final or empty. | 710 |
![]() | Parameter protocol should be final. | 711 |
![]() | Parameter clientVersion should be final. | 712 |
![]() | Parameter clientMethodsHash should be final. | 713 |
![]() | Expected @throws tag for 'IOException'. | 713 |
![]() | Method 'closeConnections' is not designed for extension - needs to be abstract, final or empty. | 718 |
![]() | Parameter vertex should be final. | 733 |
![]() | Parameter msg should be final. | 733 |
![]() | Parameter vertex should be final. | 761 |
![]() | Parameter msgList should be final. | 762 |
![]() | '+' should be on a new line. | 765 |
![]() | Parameter vertexIdMessagesList should be final. | 782 |
![]() | '+' should be on a new line. | 785 |
![]() | Parameter partitionId should be final. | 808 |
![]() | Parameter vertexList should be final. | 809 |
![]() | '+' should be on a new line. | 811 |
![]() | Parameter sourceVertexId should be final. | 818 |
![]() | Parameter targetVertexId should be final. | 818 |
![]() | Parameter edgeValue should be final. | 818 |
![]() | Method 'removeEdge' is not designed for extension - needs to be abstract, final or empty. | 835 |
![]() | Parameter vertexIndex should be final. | 836 |
![]() | Parameter destinationVertexIndex should be final. | 836 |
![]() | '+' should be on a new line. | 838 |
![]() | Parameter vertex should be final. | 854 |
![]() | Method 'removeVertex' is not designed for extension - needs to be abstract, final or empty. | 870 |
![]() | Parameter vertexIndex should be final. | 871 |
![]() | Parameter workerInfo should be final. | 888 |
![]() | Parameter partition should be final. | 889 |
![]() | '+' should be on a new line. | 900 |
![]() | '+' should be on a new line. | 901 |
![]() | Parameter workerInfo should be final. | 933 |
![]() | Parameter partitionId should be final. | 934 |
![]() | '||' should be on a new line. | 945 |
![]() | '+' should be on a new line. | 948 |
![]() | Parameter destVertex should be final. | 962 |
![]() | Parameter destVertex should be final. | 970 |
![]() | Parameter msg should be final. | 970 |
![]() | '+' should be on a new line. | 973 |
![]() | '+' should be on a new line. | 983 |
![]() | '+' should be on a new line. | 995 |
![]() | Parameter destVertex should be final. | 1005 |
![]() | Parameter edge should be final. | 1005 |
![]() | '+' should be on a new line. | 1009 |
![]() | Parameter vertexIndex should be final. | 1018 |
![]() | Parameter destVertexIndex should be final. | 1018 |
![]() | '+' should be on a new line. | 1022 |
![]() | Parameter vertex should be final. | 1031 |
![]() | '+' should be on a new line. | 1035 |
![]() | Method 'removeVertexRequest' is not designed for extension - needs to be abstract, final or empty. | 1043 |
![]() | Parameter vertexIndex should be final. | 1044 |
![]() | '+' should be on a new line. | 1048 |
![]() | Method 'flush' is not designed for extension - needs to be abstract, final or empty. | 1056 |
![]() | '+' should be on a new line. | 1059 |
![]() | '+' should be on a new line. | 1060 |
![]() | '+' should be on a new line. | 1093 |
![]() | '+' should be on a new line. | 1094 |
![]() | Method 'resetMessageCount' is not designed for extension - needs to be abstract, final or empty. | 1099 |
![]() | Method 'prepareSuperstep' is not designed for extension - needs to be abstract, final or empty. | 1106 |
![]() | Method length is 159 lines (max allowed is 150). | 1106 |
![]() | '+' should be on a new line. | 1109 |
![]() | '+' should be on a new line. | 1110 |
![]() | '+' should be on a new line. | 1125 |
![]() | '<' should be on a new line. | 1128 |
![]() | '+' should be on a new line. | 1131 |
![]() | '+' should be on a new line. | 1132 |
![]() | '+' should be on a new line. | 1133 |
![]() | ':' should be on a new line. | 1159 |
![]() | '+' should be on a new line. | 1165 |
![]() | '+' should be on a new line. | 1166 |
![]() | '+' should be on a new line. | 1171 |
![]() | '+' should be on a new line. | 1179 |
![]() | '+' should be on a new line. | 1197 |
![]() | '+' should be on a new line. | 1198 |
![]() | '+' should be on a new line. | 1199 |
![]() | '+' should be on a new line. | 1200 |
![]() | '+' should be on a new line. | 1201 |
![]() | '+' should be on a new line. | 1202 |
![]() | '+' should be on a new line. | 1203 |
![]() | '+' should be on a new line. | 1204 |
![]() | '+' should be on a new line. | 1240 |
![]() | '+' should be on a new line. | 1241 |
![]() | '+' should be on a new line. | 1242 |
![]() | '+' should be on a new line. | 1243 |
![]() | '+' should be on a new line. | 1244 |
![]() | '+' should be on a new line. | 1252 |
![]() | '+' should be on a new line. | 1253 |
![]() | Method 'fixPartitionIdToSocketAddrMap' is not designed for extension - needs to be abstract, final or empty. | 1267 |
![]() | '&&' should be on a new line. | 1276 |
![]() | '||' should be on a new line. | 1278 |
![]() | '!=' should be on a new line. | 1279 |
![]() | '+' should be on a new line. | 1282 |
![]() | '+' should be on a new line. | 1283 |
![]() | '+' should be on a new line. | 1284 |
![]() | Method 'getName' is not designed for extension - needs to be abstract, final or empty. | 1301 |
![]() | First sentence should end with a period. | 83 |
![]() | First sentence should end with a period. | 86 |
![]() | First sentence should end with a period. | 88 |
![]() | Variable 'conf' must be private and have accessor methods. | 89 |
![]() | First sentence should end with a period. | 90 |
![]() | First sentence should end with a period. | 92 |
![]() | First sentence should end with a period. | 94 |
![]() | First sentence should end with a period. | 96 |
![]() | First sentence should end with a period. | 98 |
![]() | First sentence should end with a period. | 100 |
![]() | First sentence should end with a period. | 102 |
![]() | First sentence should end with a period. | 104 |
![]() | First sentence should end with a period. | 106 |
![]() | First sentence should end with a period. | 108 |
![]() | First sentence should end with a period. | 110 |
![]() | First sentence should end with a period. | 122 |
![]() | First sentence should end with a period. | 126 |
![]() | First sentence should end with a period. | 155 |
![]() | First sentence should end with a period. | 161 |
![]() | First sentence should end with a period. | 163 |
![]() | First sentence should end with a period. | 165 |
![]() | First sentence should end with a period. | 180 |
![]() | First sentence should end with a period. | 184 |
![]() | First sentence should end with a period. | 187 |
![]() | Parameter idMessageMap should be final. | 193 |
![]() | Parameter peerConnection should be final. | 194 |
![]() | Parameter isProxy should be final. | 195 |
![]() | 'isProxy' hides a field. | 195 |
![]() | First sentence should end with a period. | 230 |
![]() | Parameter peerConnection should be final. | 243 |
![]() | 'peerConnection' hides a field. | 243 |
![]() | Parameter context should be final. | 244 |
![]() | 'context' hides a field. | 244 |
![]() | ':' should be on a new line. | 262 |
![]() | '+' should be on a new line. | 267 |
![]() | '<' should be on a new line. | 278 |
![]() | '+' should be on a new line. | 281 |
![]() | '+' should be on a new line. | 282 |
![]() | '+' should be on a new line. | 292 |
![]() | '||' should be on a new line. | 308 |
![]() | '<' should be on a new line. | 309 |
![]() | ':' should be on a new line. | 319 |
![]() | '+' should be on a new line. | 330 |
![]() | '100f' is a magic number. | 335 |
![]() | '/' should be on a new line. | 335 |
![]() | '1000f' is a magic number. | 338 |
![]() | '60f' is a magic number. | 338 |
![]() | '100f' is a magic number. | 340 |
![]() | '-' should be on a new line. | 340 |
![]() | '+' should be on a new line. | 342 |
![]() | '+' should be on a new line. | 343 |
![]() | '+' should be on a new line. | 344 |
![]() | '+' should be on a new line. | 345 |
![]() | '+' should be on a new line. | 346 |
![]() | '+' should be on a new line. | 347 |
![]() | '+' should be on a new line. | 348 |
![]() | '+' should be on a new line. | 349 |
![]() | '+' should be on a new line. | 357 |
![]() | First sentence should end with a period. | 378 |
![]() | Parameter peerConnection should be final. | 389 |
![]() | 'peerConnection' hides a field. | 389 |
![]() | Parameter destVertex should be final. | 389 |
![]() | 'destVertex' hides a field. | 389 |
![]() | '<' should be on a new line. | 412 |
![]() | '+' should be on a new line. | 415 |
![]() | '+' should be on a new line. | 416 |
![]() | Parameter context should be final. | 446 |
![]() | 'context' hides a field. | 446 |
![]() | Parameter service should be final. | 447 |
![]() | 'service' hides a field. | 447 |
![]() | Expected @throws tag for 'IOException'. | 448 |
![]() | Expected @throws tag for 'InterruptedException'. | 448 |
![]() | '10' is a magic number. | 491 |
![]() | '+' should be on a new line. | 494 |
![]() | '+' should be on a new line. | 506 |
![]() | '+' should be on a new line. | 507 |
![]() | '+' should be on a new line. | 520 |
![]() | '+' should be on a new line. | 528 |
![]() | '+' should be on a new line. | 536 |
![]() | '+' should be on a new line. | 537 |
![]() | '+' should be on a new line. | 538 |
![]() | Parameter addr should be final. | 549 |
![]() | Parameter destVertex should be final. | 549 |
![]() | Expected @throws tag for 'IOException'. | 560 |
![]() | 'jobId' hides a field. | 572 |
![]() | 'jobToken' hides a field. | 572 |
![]() | Expected @throws tag for 'IOException'. | 572 |
![]() | Method 'getPort' is not designed for extension - needs to be abstract, final or empty. | 579 |
![]() | Method 'setup' is not designed for extension - needs to be abstract, final or empty. | 583 |
![]() | First sentence should end with a period. | 595 |
![]() | 'jobId' hides a field. | 606 |
![]() | 'jobToken' hides a field. | 606 |
![]() | Expected @throws tag for 'IOException'. | 607 |
![]() | Expected @throws tag for 'InterruptedException'. | 607 |
![]() | Parameter jobId should be final. | 618 |
![]() | 'jobId' hides a field. | 618 |
![]() | Parameter jobToken should be final. | 618 |
![]() | 'jobToken' hides a field. | 618 |
![]() | Expected @throws tag for 'IOException'. | 619 |
![]() | Expected @throws tag for 'InterruptedException'. | 619 |
![]() | '+' should be on a new line. | 629 |
![]() | '+' should be on a new line. | 630 |
![]() | Parameter workerInfo should be final. | 648 |
![]() | Parameter jobId should be final. | 649 |
![]() | 'jobId' hides a field. | 649 |
![]() | Parameter jobToken should be final. | 650 |
![]() | 'jobToken' hides a field. | 650 |
![]() | Expected @throws tag for 'IOException'. | 650 |
![]() | Expected @throws tag for 'InterruptedException'. | 650 |
![]() | '+' should be on a new line. | 652 |
![]() | '+' should be on a new line. | 653 |
![]() | '+' should be on a new line. | 670 |
![]() | '+' should be on a new line. | 671 |
![]() | Parameter protocol should be final. | 694 |
![]() | Parameter clientVersion should be final. | 694 |
![]() | Method 'getProtocolSignature' is not designed for extension - needs to be abstract, final or empty. | 710 |
![]() | Parameter protocol should be final. | 711 |
![]() | Parameter clientVersion should be final. | 712 |
![]() | Parameter clientMethodsHash should be final. | 713 |
![]() | Expected @throws tag for 'IOException'. | 713 |
![]() | Method 'closeConnections' is not designed for extension - needs to be abstract, final or empty. | 718 |
![]() | Parameter vertex should be final. | 733 |
![]() | Parameter msg should be final. | 733 |
![]() | Parameter vertex should be final. | 761 |
![]() | Parameter msgList should be final. | 762 |
![]() | '+' should be on a new line. | 765 |
![]() | Parameter vertexIdMessagesList should be final. | 782 |
![]() | '+' should be on a new line. | 785 |
![]() | Parameter partitionId should be final. | 808 |
![]() | Parameter vertexList should be final. | 809 |
![]() | '+' should be on a new line. | 811 |
![]() | Parameter sourceVertexId should be final. | 818 |
![]() | Parameter targetVertexId should be final. | 818 |
![]() | Parameter edgeValue should be final. | 818 |
![]() | Method 'removeEdge' is not designed for extension - needs to be abstract, final or empty. | 835 |
![]() | Parameter vertexIndex should be final. | 836 |
![]() | Parameter destinationVertexIndex should be final. | 836 |
![]() | '+' should be on a new line. | 838 |
![]() | Parameter vertex should be final. | 854 |
![]() | Method 'removeVertex' is not designed for extension - needs to be abstract, final or empty. | 870 |
![]() | Parameter vertexIndex should be final. | 871 |
![]() | Parameter workerInfo should be final. | 888 |
![]() | Parameter partition should be final. | 889 |
![]() | '+' should be on a new line. | 900 |
![]() | '+' should be on a new line. | 901 |
![]() | Parameter workerInfo should be final. | 933 |
![]() | Parameter partitionId should be final. | 934 |
![]() | '||' should be on a new line. | 945 |
![]() | '+' should be on a new line. | 948 |
![]() | Parameter destVertex should be final. | 962 |
![]() | Parameter destVertex should be final. | 970 |
![]() | Parameter msg should be final. | 970 |
![]() | '+' should be on a new line. | 973 |
![]() | '+' should be on a new line. | 983 |
![]() | '+' should be on a new line. | 995 |
![]() | Parameter destVertex should be final. | 1005 |
![]() | Parameter edge should be final. | 1005 |
![]() | '+' should be on a new line. | 1009 |
![]() | Parameter vertexIndex should be final. | 1018 |
![]() | Parameter destVertexIndex should be final. | 1018 |
![]() | '+' should be on a new line. | 1022 |
![]() | Parameter vertex should be final. | 1031 |
![]() | '+' should be on a new line. | 1035 |
![]() | Method 'removeVertexRequest' is not designed for extension - needs to be abstract, final or empty. | 1043 |
![]() | Parameter vertexIndex should be final. | 1044 |
![]() | '+' should be on a new line. | 1048 |
![]() | Method 'flush' is not designed for extension - needs to be abstract, final or empty. | 1056 |
![]() | '+' should be on a new line. | 1059 |
![]() | '+' should be on a new line. | 1060 |
![]() | '+' should be on a new line. | 1093 |
![]() | '+' should be on a new line. | 1094 |
![]() | Method 'resetMessageCount' is not designed for extension - needs to be abstract, final or empty. | 1099 |
![]() | Method 'prepareSuperstep' is not designed for extension - needs to be abstract, final or empty. | 1106 |
![]() | Method length is 159 lines (max allowed is 150). | 1106 |
![]() | '+' should be on a new line. | 1109 |
![]() | '+' should be on a new line. | 1110 |
![]() | '+' should be on a new line. | 1125 |
![]() | '<' should be on a new line. | 1128 |
![]() | '+' should be on a new line. | 1131 |
![]() | '+' should be on a new line. | 1132 |
![]() | '+' should be on a new line. | 1133 |
![]() | ':' should be on a new line. | 1159 |
![]() | '+' should be on a new line. | 1165 |
![]() | '+' should be on a new line. | 1166 |
![]() | '+' should be on a new line. | 1171 |
![]() | '+' should be on a new line. | 1179 |
![]() | '+' should be on a new line. | 1197 |
![]() | '+' should be on a new line. | 1198 |
![]() | '+' should be on a new line. | 1199 |
![]() | '+' should be on a new line. | 1200 |
![]() | '+' should be on a new line. | 1201 |
![]() | '+' should be on a new line. | 1202 |
![]() | '+' should be on a new line. | 1203 |
![]() | '+' should be on a new line. | 1204 |
![]() | '+' should be on a new line. | 1240 |
![]() | '+' should be on a new line. | 1241 |
![]() | '+' should be on a new line. | 1242 |
![]() | '+' should be on a new line. | 1243 |
![]() | '+' should be on a new line. | 1244 |
![]() | '+' should be on a new line. | 1252 |
![]() | '+' should be on a new line. | 1253 |
![]() | Method 'fixPartitionIdToSocketAddrMap' is not designed for extension - needs to be abstract, final or empty. | 1267 |
![]() | '&&' should be on a new line. | 1276 |
![]() | '||' should be on a new line. | 1278 |
![]() | '!=' should be on a new line. | 1279 |
![]() | '+' should be on a new line. | 1282 |
![]() | '+' should be on a new line. | 1283 |
![]() | '+' should be on a new line. | 1284 |
![]() | Method 'getName' is not designed for extension - needs to be abstract, final or empty. | 1301 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 50 |
![]() | Expected @throws tag for 'IOException'. | 64 |
![]() | Expected @throws tag for 'IOException'. | 73 |
![]() | Expected @throws tag for 'IOException'. | 82 |
![]() | Expected @throws tag for 'IOException'. | 91 |
![]() | First sentence should end with a period. | 93 |
![]() | Expected @throws tag for 'IOException'. | 102 |
![]() | First sentence should end with a period. | 104 |
![]() | Expected @throws tag for 'IOException'. | 111 |
![]() | First sentence should end with a period. | 113 |
![]() | Expected @throws tag for 'IOException'. | 119 |
![]() | First sentence should end with a period. | 121 |
![]() | Expected @throws tag for 'IOException'. | 127 |
![]() | First sentence should end with a period. | 50 |
![]() | Expected @throws tag for 'IOException'. | 64 |
![]() | Expected @throws tag for 'IOException'. | 73 |
![]() | Expected @throws tag for 'IOException'. | 82 |
![]() | Expected @throws tag for 'IOException'. | 91 |
![]() | First sentence should end with a period. | 93 |
![]() | Expected @throws tag for 'IOException'. | 102 |
![]() | First sentence should end with a period. | 104 |
![]() | Expected @throws tag for 'IOException'. | 111 |
![]() | First sentence should end with a period. | 113 |
![]() | Expected @throws tag for 'IOException'. | 119 |
![]() | First sentence should end with a period. | 121 |
![]() | Expected @throws tag for 'IOException'. | 127 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 23 |
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 23 |
![]() | First sentence should end with a period. | 27 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 21 |
![]() | First sentence should end with a period. | 21 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 23 |
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 23 |
![]() | First sentence should end with a period. | 27 |
Violation | Message | Line |
---|---|---|
![]() | Parameter msgList should be final. | 47 |
![]() | Method 'setClass' is not designed for extension - needs to be abstract, final or empty. | 51 |
![]() | Parameter msgList should be final. | 47 |
![]() | Method 'setClass' is not designed for extension - needs to be abstract, final or empty. | 51 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 74 |
![]() | Parameter context should be final. | 86 |
![]() | Parameter service should be final. | 87 |
![]() | Parameter graphState should be final. | 88 |
![]() | Expected @throws tag for 'IOException'. | 89 |
![]() | Expected @throws tag for 'InterruptedException'. | 89 |
![]() | Method 'createJobToken' is not designed for extension - needs to be abstract, final or empty. | 98 |
![]() | Expected @throws tag for 'IOException'. | 102 |
![]() | Method 'getRPCServer' is not designed for extension - needs to be abstract, final or empty. | 127 |
![]() | Parameter myAddress should be final. | 129 |
![]() | Parameter numHandlers should be final. | 129 |
![]() | Parameter jobId should be final. | 129 |
![]() | Parameter jt should be final. | 135 |
![]() | Expected @throws tag for 'IOException'. | 135 |
![]() | Method 'getRPCProxy' is not designed for extension - needs to be abstract, final or empty. | 166 |
![]() | Parameter jobId should be final. | 169 |
![]() | Parameter jt should be final. | 173 |
![]() | Expected @throws tag for 'IOException'. | 175 |
![]() | Expected @throws tag for 'InterruptedException'. | 175 |
![]() | '+' should be on a new line. | 185 |
![]() | Method 'getServerData' is not designed for extension - needs to be abstract, final or empty. | 206 |
![]() | First sentence should end with a period. | 74 |
![]() | Parameter context should be final. | 86 |
![]() | Parameter service should be final. | 87 |
![]() | Parameter graphState should be final. | 88 |
![]() | Expected @throws tag for 'IOException'. | 89 |
![]() | Expected @throws tag for 'InterruptedException'. | 89 |
![]() | Method 'createJobToken' is not designed for extension - needs to be abstract, final or empty. | 98 |
![]() | Expected @throws tag for 'IOException'. | 102 |
![]() | Method 'getRPCServer' is not designed for extension - needs to be abstract, final or empty. | 127 |
![]() | Parameter myAddress should be final. | 129 |
![]() | Parameter numHandlers should be final. | 129 |
![]() | Parameter jobId should be final. | 129 |
![]() | Parameter jt should be final. | 135 |
![]() | Expected @throws tag for 'IOException'. | 135 |
![]() | Method 'getRPCProxy' is not designed for extension - needs to be abstract, final or empty. | 166 |
![]() | Parameter jobId should be final. | 169 |
![]() | Parameter jt should be final. | 173 |
![]() | Expected @throws tag for 'IOException'. | 175 |
![]() | Expected @throws tag for 'InterruptedException'. | 175 |
![]() | '+' should be on a new line. | 185 |
![]() | Method 'getServerData' is not designed for extension - needs to be abstract, final or empty. | 206 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 45 |
![]() | First sentence should end with a period. | 47 |
![]() | First sentence should end with a period. | 50 |
![]() | First sentence should end with a period. | 54 |
![]() | Parameter conf should be final. | 59 |
![]() | Method 'addMessage' is not designed for extension - needs to be abstract, final or empty. | 75 |
![]() | Parameter partitionId should be final. | 75 |
![]() | Parameter destVertexId should be final. | 75 |
![]() | Parameter message should be final. | 75 |
![]() | Method 'removePartitionMessages' is not designed for extension - needs to be abstract, final or empty. | 118 |
![]() | Parameter partitionId should be final. | 118 |
![]() | Method 'removeAllPartitionMessages' is not designed for extension - needs to be abstract, final or empty. | 129 |
![]() | First sentence should end with a period. | 45 |
![]() | First sentence should end with a period. | 47 |
![]() | First sentence should end with a period. | 50 |
![]() | First sentence should end with a period. | 54 |
![]() | Parameter conf should be final. | 59 |
![]() | Method 'addMessage' is not designed for extension - needs to be abstract, final or empty. | 75 |
![]() | Parameter partitionId should be final. | 75 |
![]() | Parameter destVertexId should be final. | 75 |
![]() | Parameter message should be final. | 75 |
![]() | Method 'removePartitionMessages' is not designed for extension - needs to be abstract, final or empty. | 118 |
![]() | Parameter partitionId should be final. | 118 |
![]() | Method 'removeAllPartitionMessages' is not designed for extension - needs to be abstract, final or empty. | 129 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 42 |
![]() | First sentence should end with a period. | 45 |
![]() | Parameter partitionId should be final. | 58 |
![]() | Parameter destVertexId should be final. | 58 |
![]() | Parameter partitionId should be final. | 79 |
![]() | Method 'addEdgeMutation' is not designed for extension - needs to be abstract, final or empty. | 98 |
![]() | Parameter partitionId should be final. | 99 |
![]() | Parameter destVertexId should be final. | 99 |
![]() | Parameter edge should be final. | 99 |
![]() | Method 'removeEdgeMutation' is not designed for extension - needs to be abstract, final or empty. | 119 |
![]() | Parameter partitionId should be final. | 120 |
![]() | Parameter vertexIndex should be final. | 120 |
![]() | Parameter destinationVertexIndex should be final. | 120 |
![]() | Method 'addVertexMutation' is not designed for extension - needs to be abstract, final or empty. | 139 |
![]() | Parameter partitionId should be final. | 140 |
![]() | Parameter vertex should be final. | 140 |
![]() | Method 'removeVertexMutation' is not designed for extension - needs to be abstract, final or empty. | 159 |
![]() | Parameter partitionId should be final. | 160 |
![]() | Parameter destVertexId should be final. | 160 |
![]() | Method 'removePartitionMutations' is not designed for extension - needs to be abstract, final or empty. | 178 |
![]() | Parameter partitionId should be final. | 179 |
![]() | Method 'removeAllPartitionMutations' is not designed for extension - needs to be abstract, final or empty. | 191 |
![]() | First sentence should end with a period. | 42 |
![]() | First sentence should end with a period. | 45 |
![]() | Parameter partitionId should be final. | 58 |
![]() | Parameter destVertexId should be final. | 58 |
![]() | Parameter partitionId should be final. | 79 |
![]() | Method 'addEdgeMutation' is not designed for extension - needs to be abstract, final or empty. | 98 |
![]() | Parameter partitionId should be final. | 99 |
![]() | Parameter destVertexId should be final. | 99 |
![]() | Parameter edge should be final. | 99 |
![]() | Method 'removeEdgeMutation' is not designed for extension - needs to be abstract, final or empty. | 119 |
![]() | Parameter partitionId should be final. | 120 |
![]() | Parameter vertexIndex should be final. | 120 |
![]() | Parameter destinationVertexIndex should be final. | 120 |
![]() | Method 'addVertexMutation' is not designed for extension - needs to be abstract, final or empty. | 139 |
![]() | Parameter partitionId should be final. | 140 |
![]() | Parameter vertex should be final. | 140 |
![]() | Method 'removeVertexMutation' is not designed for extension - needs to be abstract, final or empty. | 159 |
![]() | Parameter partitionId should be final. | 160 |
![]() | Parameter destVertexId should be final. | 160 |
![]() | Method 'removePartitionMutations' is not designed for extension - needs to be abstract, final or empty. | 178 |
![]() | Parameter partitionId should be final. | 179 |
![]() | Method 'removeAllPartitionMutations' is not designed for extension - needs to be abstract, final or empty. | 191 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 35 |
![]() | First sentence should end with a period. | 48 |
![]() | First sentence should end with a period. | 51 |
![]() | First sentence should end with a period. | 56 |
![]() | Parameter configuration should be final. | 74 |
![]() | Parameter messageStoreFactory should be final. | 75 |
![]() | 'messageStoreFactory' hides a field. | 76 |
![]() | Method 'getPartitionStore' is not designed for extension - needs to be abstract, final or empty. | 94 |
![]() | First sentence should end with a period. | 98 |
![]() | Method 'getIncomingMessageStore' is not designed for extension - needs to be abstract, final or empty. | 104 |
![]() | First sentence should end with a period. | 108 |
![]() | Method 'getCurrentMessageStore' is not designed for extension - needs to be abstract, final or empty. | 114 |
![]() | First sentence should end with a period. | 118 |
![]() | Method 'prepareSuperstep' is not designed for extension - needs to be abstract, final or empty. | 119 |
![]() | First sentence should end with a period. | 132 |
![]() | Method 'getVertexMutations' is not designed for extension - needs to be abstract, final or empty. | 137 |
![]() | First sentence should end with a period. | 35 |
![]() | First sentence should end with a period. | 48 |
![]() | First sentence should end with a period. | 51 |
![]() | First sentence should end with a period. | 56 |
![]() | Parameter configuration should be final. | 74 |
![]() | Parameter messageStoreFactory should be final. | 75 |
![]() | 'messageStoreFactory' hides a field. | 76 |
![]() | Method 'getPartitionStore' is not designed for extension - needs to be abstract, final or empty. | 94 |
![]() | First sentence should end with a period. | 98 |
![]() | Method 'getIncomingMessageStore' is not designed for extension - needs to be abstract, final or empty. | 104 |
![]() | First sentence should end with a period. | 108 |
![]() | Method 'getCurrentMessageStore' is not designed for extension - needs to be abstract, final or empty. | 114 |
![]() | First sentence should end with a period. | 118 |
![]() | Method 'prepareSuperstep' is not designed for extension - needs to be abstract, final or empty. | 119 |
![]() | First sentence should end with a period. | 132 |
![]() | Method 'getVertexMutations' is not designed for extension - needs to be abstract, final or empty. | 137 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 41 |
![]() | First sentence should end with a period. | 43 |
![]() | First sentence should end with a period. | 45 |
![]() | Parameter vertexId should be final. | 59 |
![]() | 'vertexId' hides a field. | 59 |
![]() | Parameter msgList should be final. | 59 |
![]() | 'msgList' hides a field. | 59 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 64 |
![]() | Parameter input should be final. | 65 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 73 |
![]() | Parameter output should be final. | 74 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 79 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 84 |
![]() | Parameter conf should be final. | 85 |
![]() | 'conf' hides a field. | 85 |
![]() | Method 'getVertexId' is not designed for extension - needs to be abstract, final or empty. | 94 |
![]() | Method 'getMessageList' is not designed for extension - needs to be abstract, final or empty. | 103 |
![]() | First sentence should end with a period. | 41 |
![]() | First sentence should end with a period. | 43 |
![]() | First sentence should end with a period. | 45 |
![]() | Parameter vertexId should be final. | 59 |
![]() | 'vertexId' hides a field. | 59 |
![]() | Parameter msgList should be final. | 59 |
![]() | 'msgList' hides a field. | 59 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 64 |
![]() | Parameter input should be final. | 65 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 73 |
![]() | Parameter output should be final. | 74 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 79 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 84 |
![]() | Parameter conf should be final. | 85 |
![]() | 'conf' hides a field. | 85 |
![]() | Method 'getVertexId' is not designed for extension - needs to be abstract, final or empty. | 94 |
![]() | Method 'getMessageList' is not designed for extension - needs to be abstract, final or empty. | 103 |
Violation | Message | Line |
---|---|---|
![]() | Parameter vertexIdMessagesList should be final. | 50 |
![]() | Method 'setClass' is not designed for extension - needs to be abstract, final or empty. | 54 |
![]() | Parameter vertexIdMessagesList should be final. | 50 |
![]() | Method 'setClass' is not designed for extension - needs to be abstract, final or empty. | 54 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 44 |
![]() | Method 'setClass' is not designed for extension - needs to be abstract, final or empty. | 49 |
![]() | First sentence should end with a period. | 44 |
![]() | Method 'setClass' is not designed for extension - needs to be abstract, final or empty. | 49 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 31 |
![]() | First sentence should end with a period. | 61 |
![]() | First sentence should end with a period. | 70 |
![]() | Expected @throws tag for 'IOException'. | 77 |
![]() | First sentence should end with a period. | 79 |
![]() | Expected @throws tag for 'IOException'. | 87 |
![]() | First sentence should end with a period. | 89 |
![]() | Expected @throws tag for 'IOException'. | 95 |
![]() | First sentence should end with a period. | 97 |
![]() | Expected @throws tag for 'IOException'. | 103 |
![]() | Expected @throws tag for 'IOException'. | 111 |
![]() | Expected @throws tag for 'IOException'. | 125 |
![]() | First sentence should end with a period. | 31 |
![]() | First sentence should end with a period. | 61 |
![]() | First sentence should end with a period. | 70 |
![]() | Expected @throws tag for 'IOException'. | 77 |
![]() | First sentence should end with a period. | 79 |
![]() | Expected @throws tag for 'IOException'. | 87 |
![]() | First sentence should end with a period. | 89 |
![]() | Expected @throws tag for 'IOException'. | 95 |
![]() | First sentence should end with a period. | 97 |
![]() | Expected @throws tag for 'IOException'. | 103 |
![]() | Expected @throws tag for 'IOException'. | 111 |
![]() | Expected @throws tag for 'IOException'. | 125 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 24 |
![]() | First sentence should end with a period. | 24 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 51 |
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 51 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 28 |
![]() | First sentence should end with a period. | 36 |
![]() | Expected @throws tag for 'IOException'. | 42 |
![]() | Expected @throws tag for 'IOException'. | 51 |
![]() | Expected @throws tag for 'IOException'. | 59 |
![]() | Expected @throws tag for 'IOException'. | 66 |
![]() | First sentence should end with a period. | 28 |
![]() | First sentence should end with a period. | 36 |
![]() | Expected @throws tag for 'IOException'. | 42 |
![]() | Expected @throws tag for 'IOException'. | 51 |
![]() | Expected @throws tag for 'IOException'. | 59 |
![]() | Expected @throws tag for 'IOException'. | 66 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 57 |
![]() | First sentence should end with a period. | 59 |
![]() | First sentence should end with a period. | 61 |
![]() | First sentence should end with a period. | 63 |
![]() | First sentence should end with a period. | 65 |
![]() | First sentence should end with a period. | 67 |
![]() | First sentence should end with a period. | 70 |
![]() | Parameter combiner should be final. | 78 |
![]() | 'combiner' hides a field. | 78 |
![]() | Parameter config should be final. | 79 |
![]() | 'config' hides a field. | 79 |
![]() | Parameter fileStoreFactory should be final. | 80 |
![]() | 'fileStoreFactory' hides a field. | 80 |
![]() | Method 'addVertexMessages' is not designed for extension - needs to be abstract, final or empty. | 91 |
![]() | Parameter vertexId should be final. | 92 |
![]() | Parameter messages should be final. | 93 |
![]() | Method 'addMessages' is not designed for extension - needs to be abstract, final or empty. | 117 |
![]() | Parameter messages should be final. | 118 |
![]() | Method 'getVertexMessages' is not designed for extension - needs to be abstract, final or empty. | 124 |
![]() | Parameter vertexId should be final. | 125 |
![]() | Method 'getNumberOfMessages' is not designed for extension - needs to be abstract, final or empty. | 136 |
![]() | Method 'hasMessagesForVertex' is not designed for extension - needs to be abstract, final or empty. | 141 |
![]() | Parameter vertexId should be final. | 142 |
![]() | Method 'getDestinationVertices' is not designed for extension - needs to be abstract, final or empty. | 146 |
![]() | Method 'clearVertexMessages' is not designed for extension - needs to be abstract, final or empty. | 151 |
![]() | Parameter vertexId should be final. | 152 |
![]() | Method 'clearAll' is not designed for extension - needs to be abstract, final or empty. | 156 |
![]() | Method 'flush' is not designed for extension - needs to be abstract, final or empty. | 166 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 184 |
![]() | Parameter out should be final. | 185 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 209 |
![]() | Parameter in should be final. | 210 |
![]() | First sentence should end with a period. | 245 |
![]() | Parameter config should be final. | 257 |
![]() | Parameter fileStoreFactory should be final. | 258 |
![]() | First sentence should end with a period. | 262 |
![]() | First sentence should end with a period. | 271 |
![]() | First sentence should end with a period. | 273 |
![]() | First sentence should end with a period. | 275 |
![]() | Parameter config should be final. | 284 |
![]() | 'config' hides a field. | 284 |
![]() | Parameter fileStoreFactory should be final. | 285 |
![]() | 'fileStoreFactory' hides a field. | 285 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 57 |
![]() | First sentence should end with a period. | 59 |
![]() | First sentence should end with a period. | 61 |
![]() | First sentence should end with a period. | 63 |
![]() | First sentence should end with a period. | 65 |
![]() | First sentence should end with a period. | 67 |
![]() | First sentence should end with a period. | 70 |
![]() | Parameter combiner should be final. | 78 |
![]() | 'combiner' hides a field. | 78 |
![]() | Parameter config should be final. | 79 |
![]() | 'config' hides a field. | 79 |
![]() | Parameter fileStoreFactory should be final. | 80 |
![]() | 'fileStoreFactory' hides a field. | 80 |
![]() | Method 'addVertexMessages' is not designed for extension - needs to be abstract, final or empty. | 91 |
![]() | Parameter vertexId should be final. | 92 |
![]() | Parameter messages should be final. | 93 |
![]() | Method 'addMessages' is not designed for extension - needs to be abstract, final or empty. | 117 |
![]() | Parameter messages should be final. | 118 |
![]() | Method 'getVertexMessages' is not designed for extension - needs to be abstract, final or empty. | 124 |
![]() | Parameter vertexId should be final. | 125 |
![]() | Method 'getNumberOfMessages' is not designed for extension - needs to be abstract, final or empty. | 136 |
![]() | Method 'hasMessagesForVertex' is not designed for extension - needs to be abstract, final or empty. | 141 |
![]() | Parameter vertexId should be final. | 142 |
![]() | Method 'getDestinationVertices' is not designed for extension - needs to be abstract, final or empty. | 146 |
![]() | Method 'clearVertexMessages' is not designed for extension - needs to be abstract, final or empty. | 151 |
![]() | Parameter vertexId should be final. | 152 |
![]() | Method 'clearAll' is not designed for extension - needs to be abstract, final or empty. | 156 |
![]() | Method 'flush' is not designed for extension - needs to be abstract, final or empty. | 166 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 184 |
![]() | Parameter out should be final. | 185 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 209 |
![]() | Parameter in should be final. | 210 |
![]() | First sentence should end with a period. | 245 |
![]() | Parameter config should be final. | 257 |
![]() | Parameter fileStoreFactory should be final. | 258 |
![]() | First sentence should end with a period. | 262 |
![]() | First sentence should end with a period. | 271 |
![]() | First sentence should end with a period. | 273 |
![]() | First sentence should end with a period. | 275 |
![]() | Parameter config should be final. | 284 |
![]() | 'config' hides a field. | 284 |
![]() | Parameter fileStoreFactory should be final. | 285 |
![]() | 'fileStoreFactory' hides a field. | 285 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 51 |
![]() | First sentence should end with a period. | 53 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 58 |
![]() | Parameter service should be final. | 69 |
![]() | 'service' hides a field. | 69 |
![]() | Parameter maxNumberOfMessagesInMemory should be final. | 70 |
![]() | 'maxNumberOfMessagesInMemory' hides a field. | 70 |
![]() | Parameter fileStoreFactory should be final. | 71 |
![]() | 'fileStoreFactory' hides a field. | 72 |
![]() | Method 'addVertexMessages' is not designed for extension - needs to be abstract, final or empty. | 79 |
![]() | Parameter vertexId should be final. | 80 |
![]() | Parameter messages should be final. | 81 |
![]() | Method 'addMessages' is not designed for extension - needs to be abstract, final or empty. | 86 |
![]() | Parameter messages should be final. | 87 |
![]() | Method 'addPartitionMessages' is not designed for extension - needs to be abstract, final or empty. | 95 |
![]() | Parameter messages should be final. | 96 |
![]() | Parameter partitionId should be final. | 97 |
![]() | Method 'getVertexMessages' is not designed for extension - needs to be abstract, final or empty. | 102 |
![]() | Parameter vertexId should be final. | 103 |
![]() | Method 'getNumberOfMessages' is not designed for extension - needs to be abstract, final or empty. | 111 |
![]() | ':' should be on a new line. | 114 |
![]() | Method 'hasMessagesForVertex' is not designed for extension - needs to be abstract, final or empty. | 121 |
![]() | Parameter vertexId should be final. | 122 |
![]() | Method 'getDestinationVertices' is not designed for extension - needs to be abstract, final or empty. | 126 |
![]() | ':' should be on a new line. | 129 |
![]() | Method 'getPartitionDestinationVertices' is not designed for extension - needs to be abstract, final or empty. | 136 |
![]() | Parameter partitionId should be final. | 137 |
![]() | Method 'clearVertexMessages' is not designed for extension - needs to be abstract, final or empty. | 147 |
![]() | Parameter vertexId should be final. | 148 |
![]() | Method 'clearPartition' is not designed for extension - needs to be abstract, final or empty. | 154 |
![]() | Parameter partitionId should be final. | 155 |
![]() | Method 'clearAll' is not designed for extension - needs to be abstract, final or empty. | 163 |
![]() | ':' should be on a new line. | 165 |
![]() | First sentence should end with a period. | 172 |
![]() | Expected @throws tag for 'IOException'. | 177 |
![]() | First sentence should end with a period. | 183 |
![]() | ':' should be on a new line. | 190 |
![]() | First sentence should end with a period. | 197 |
![]() | Expected @throws tag for 'IOException'. | 202 |
![]() | ':' should be on a new line. | 205 |
![]() | First sentence should end with a period. | 218 |
![]() | Parameter vertexId should be final. | 225 |
![]() | Parameter partitionId should be final. | 239 |
![]() | Avoid inline conditionals. | 248 |
![]() | Method 'writePartition' is not designed for extension - needs to be abstract, final or empty. | 251 |
![]() | Parameter out should be final. | 252 |
![]() | Parameter partitionId should be final. | 253 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 262 |
![]() | Parameter out should be final. | 263 |
![]() | ':' should be on a new line. | 265 |
![]() | Method 'readFieldsForPartition' is not designed for extension - needs to be abstract, final or empty. | 272 |
![]() | Parameter in should be final. | 273 |
![]() | Parameter partitionId should be final. | 274 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 282 |
![]() | Parameter in should be final. | 283 |
![]() | First sentence should end with a period. | 294 |
![]() | Parameter service should be final. | 310 |
![]() | Parameter maxMessagesInMemory should be final. | 311 |
![]() | Parameter fileStoreFactory should be final. | 312 |
![]() | First sentence should end with a period. | 318 |
![]() | First sentence should end with a period. | 329 |
![]() | First sentence should end with a period. | 331 |
![]() | First sentence should end with a period. | 333 |
![]() | Parameter service should be final. | 343 |
![]() | 'service' hides a field. | 343 |
![]() | Parameter maxMessagesInMemory should be final. | 344 |
![]() | 'maxMessagesInMemory' hides a field. | 344 |
![]() | Parameter fileStoreFactory should be final. | 345 |
![]() | 'fileStoreFactory' hides a field. | 346 |
![]() | First sentence should end with a period. | 51 |
![]() | First sentence should end with a period. | 53 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 58 |
![]() | Parameter service should be final. | 69 |
![]() | 'service' hides a field. | 69 |
![]() | Parameter maxNumberOfMessagesInMemory should be final. | 70 |
![]() | 'maxNumberOfMessagesInMemory' hides a field. | 70 |
![]() | Parameter fileStoreFactory should be final. | 71 |
![]() | 'fileStoreFactory' hides a field. | 72 |
![]() | Method 'addVertexMessages' is not designed for extension - needs to be abstract, final or empty. | 79 |
![]() | Parameter vertexId should be final. | 80 |
![]() | Parameter messages should be final. | 81 |
![]() | Method 'addMessages' is not designed for extension - needs to be abstract, final or empty. | 86 |
![]() | Parameter messages should be final. | 87 |
![]() | Method 'addPartitionMessages' is not designed for extension - needs to be abstract, final or empty. | 95 |
![]() | Parameter messages should be final. | 96 |
![]() | Parameter partitionId should be final. | 97 |
![]() | Method 'getVertexMessages' is not designed for extension - needs to be abstract, final or empty. | 102 |
![]() | Parameter vertexId should be final. | 103 |
![]() | Method 'getNumberOfMessages' is not designed for extension - needs to be abstract, final or empty. | 111 |
![]() | ':' should be on a new line. | 114 |
![]() | Method 'hasMessagesForVertex' is not designed for extension - needs to be abstract, final or empty. | 121 |
![]() | Parameter vertexId should be final. | 122 |
![]() | Method 'getDestinationVertices' is not designed for extension - needs to be abstract, final or empty. | 126 |
![]() | ':' should be on a new line. | 129 |
![]() | Method 'getPartitionDestinationVertices' is not designed for extension - needs to be abstract, final or empty. | 136 |
![]() | Parameter partitionId should be final. | 137 |
![]() | Method 'clearVertexMessages' is not designed for extension - needs to be abstract, final or empty. | 147 |
![]() | Parameter vertexId should be final. | 148 |
![]() | Method 'clearPartition' is not designed for extension - needs to be abstract, final or empty. | 154 |
![]() | Parameter partitionId should be final. | 155 |
![]() | Method 'clearAll' is not designed for extension - needs to be abstract, final or empty. | 163 |
![]() | ':' should be on a new line. | 165 |
![]() | First sentence should end with a period. | 172 |
![]() | Expected @throws tag for 'IOException'. | 177 |
![]() | First sentence should end with a period. | 183 |
![]() | ':' should be on a new line. | 190 |
![]() | First sentence should end with a period. | 197 |
![]() | Expected @throws tag for 'IOException'. | 202 |
![]() | ':' should be on a new line. | 205 |
![]() | First sentence should end with a period. | 218 |
![]() | Parameter vertexId should be final. | 225 |
![]() | Parameter partitionId should be final. | 239 |
![]() | Avoid inline conditionals. | 248 |
![]() | Method 'writePartition' is not designed for extension - needs to be abstract, final or empty. | 251 |
![]() | Parameter out should be final. | 252 |
![]() | Parameter partitionId should be final. | 253 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 262 |
![]() | Parameter out should be final. | 263 |
![]() | ':' should be on a new line. | 265 |
![]() | Method 'readFieldsForPartition' is not designed for extension - needs to be abstract, final or empty. | 272 |
![]() | Parameter in should be final. | 273 |
![]() | Parameter partitionId should be final. | 274 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 282 |
![]() | Parameter in should be final. | 283 |
![]() | First sentence should end with a period. | 294 |
![]() | Parameter service should be final. | 310 |
![]() | Parameter maxMessagesInMemory should be final. | 311 |
![]() | Parameter fileStoreFactory should be final. | 312 |
![]() | First sentence should end with a period. | 318 |
![]() | First sentence should end with a period. | 329 |
![]() | First sentence should end with a period. | 331 |
![]() | First sentence should end with a period. | 333 |
![]() | Parameter service should be final. | 343 |
![]() | 'service' hides a field. | 343 |
![]() | Parameter maxMessagesInMemory should be final. | 344 |
![]() | 'maxMessagesInMemory' hides a field. | 344 |
![]() | Parameter fileStoreFactory should be final. | 345 |
![]() | 'fileStoreFactory' hides a field. | 346 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 26 |
![]() | Expected @throws tag for 'IOException'. | 39 |
![]() | First sentence should end with a period. | 26 |
![]() | Expected @throws tag for 'IOException'. | 39 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 35 |
![]() | Expected @throws tag for 'IOException'. | 43 |
![]() | First sentence should end with a period. | 45 |
![]() | First sentence should end with a period. | 52 |
![]() | First sentence should end with a period. | 60 |
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 35 |
![]() | Expected @throws tag for 'IOException'. | 43 |
![]() | First sentence should end with a period. | 45 |
![]() | First sentence should end with a period. | 52 |
![]() | First sentence should end with a period. | 60 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 30 |
![]() | First sentence should end with a period. | 38 |
![]() | Expected @throws tag for 'IOException'. | 46 |
![]() | First sentence should end with a period. | 48 |
![]() | Expected @throws tag for 'IOException'. | 62 |
![]() | Expected @throws tag for 'IOException'. | 71 |
![]() | First sentence should end with a period. | 73 |
![]() | Expected @throws tag for 'IOException'. | 82 |
![]() | First sentence should end with a period. | 30 |
![]() | First sentence should end with a period. | 38 |
![]() | Expected @throws tag for 'IOException'. | 46 |
![]() | First sentence should end with a period. | 48 |
![]() | Expected @throws tag for 'IOException'. | 62 |
![]() | Expected @throws tag for 'IOException'. | 71 |
![]() | First sentence should end with a period. | 73 |
![]() | Expected @throws tag for 'IOException'. | 82 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 24 |
![]() | First sentence should end with a period. | 33 |
![]() | First sentence should end with a period. | 24 |
![]() | First sentence should end with a period. | 33 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 61 |
![]() | First sentence should end with a period. | 63 |
![]() | First sentence should end with a period. | 65 |
![]() | First sentence should end with a period. | 67 |
![]() | First sentence should end with a period. | 69 |
![]() | First sentence should end with a period. | 71 |
![]() | Parameter config should be final. | 82 |
![]() | 'config' hides a field. | 82 |
![]() | Parameter bufferSize should be final. | 82 |
![]() | 'bufferSize' hides a field. | 82 |
![]() | Parameter fileName should be final. | 83 |
![]() | Method 'addMessages' is not designed for extension - needs to be abstract, final or empty. | 89 |
![]() | Parameter messages should be final. | 90 |
![]() | Parameter messages should be final. | 107 |
![]() | Expected @throws tag for 'IOException'. | 108 |
![]() | Method 'getVertexMessages' is not designed for extension - needs to be abstract, final or empty. | 143 |
![]() | Parameter vertexId should be final. | 144 |
![]() | Expected @throws tag for 'IOException'. | 145 |
![]() | Parameter vertexId should be final. | 162 |
![]() | Method 'clearAll' is not designed for extension - needs to be abstract, final or empty. | 165 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 171 |
![]() | Parameter out should be final. | 172 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 189 |
![]() | Parameter in should be final. | 190 |
![]() | 'in' hides a field. | 190 |
![]() | First sentence should end with a period. | 205 |
![]() | Expected @throws tag for 'IOException'. | 210 |
![]() | Expected @throws tag for 'IOException'. | 227 |
![]() | Expected @throws tag for 'IOException'. | 244 |
![]() | Expected @throws tag for 'IOException'. | 262 |
![]() | Expected @throws tag for 'IOException'. | 279 |
![]() | Expected @throws tag for 'IOException'. | 292 |
![]() | First sentence should end with a period. | 300 |
![]() | Parameter config should be final. | 310 |
![]() | First sentence should end with a period. | 314 |
![]() | First sentence should end with a period. | 323 |
![]() | First sentence should end with a period. | 325 |
![]() | First sentence should end with a period. | 327 |
![]() | First sentence should end with a period. | 329 |
![]() | Parameter config should be final. | 333 |
![]() | 'config' hides a field. | 333 |
![]() | First sentence should end with a period. | 61 |
![]() | First sentence should end with a period. | 63 |
![]() | First sentence should end with a period. | 65 |
![]() | First sentence should end with a period. | 67 |
![]() | First sentence should end with a period. | 69 |
![]() | First sentence should end with a period. | 71 |
![]() | Parameter config should be final. | 82 |
![]() | 'config' hides a field. | 82 |
![]() | Parameter bufferSize should be final. | 82 |
![]() | 'bufferSize' hides a field. | 82 |
![]() | Parameter fileName should be final. | 83 |
![]() | Method 'addMessages' is not designed for extension - needs to be abstract, final or empty. | 89 |
![]() | Parameter messages should be final. | 90 |
![]() | Parameter messages should be final. | 107 |
![]() | Expected @throws tag for 'IOException'. | 108 |
![]() | Method 'getVertexMessages' is not designed for extension - needs to be abstract, final or empty. | 143 |
![]() | Parameter vertexId should be final. | 144 |
![]() | Expected @throws tag for 'IOException'. | 145 |
![]() | Parameter vertexId should be final. | 162 |
![]() | Method 'clearAll' is not designed for extension - needs to be abstract, final or empty. | 165 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 171 |
![]() | Parameter out should be final. | 172 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 189 |
![]() | Parameter in should be final. | 190 |
![]() | 'in' hides a field. | 190 |
![]() | First sentence should end with a period. | 205 |
![]() | Expected @throws tag for 'IOException'. | 210 |
![]() | Expected @throws tag for 'IOException'. | 227 |
![]() | Expected @throws tag for 'IOException'. | 244 |
![]() | Expected @throws tag for 'IOException'. | 262 |
![]() | Expected @throws tag for 'IOException'. | 279 |
![]() | Expected @throws tag for 'IOException'. | 292 |
![]() | First sentence should end with a period. | 300 |
![]() | Parameter config should be final. | 310 |
![]() | First sentence should end with a period. | 314 |
![]() | First sentence should end with a period. | 323 |
![]() | First sentence should end with a period. | 325 |
![]() | First sentence should end with a period. | 327 |
![]() | First sentence should end with a period. | 329 |
![]() | Parameter config should be final. | 333 |
![]() | 'config' hides a field. | 333 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 42 |
![]() | First sentence should end with a period. | 53 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 60 |
![]() | First sentence should end with a period. | 62 |
![]() | Parameter service should be final. | 70 |
![]() | 'service' hides a field. | 70 |
![]() | Parameter combiner should be final. | 71 |
![]() | 'combiner' hides a field. | 71 |
![]() | Parameter config should be final. | 71 |
![]() | 'config' hides a field. | 71 |
![]() | Method 'addVertexMessages' is not designed for extension - needs to be abstract, final or empty. | 78 |
![]() | Parameter vertexId should be final. | 79 |
![]() | Parameter messages should be final. | 80 |
![]() | Method 'addMessages' is not designed for extension - needs to be abstract, final or empty. | 102 |
![]() | Parameter messages should be final. | 103 |
![]() | Method 'addPartitionMessages' is not designed for extension - needs to be abstract, final or empty. | 109 |
![]() | Parameter messages should be final. | 110 |
![]() | Parameter partitionId should be final. | 111 |
![]() | Method 'getVertexMessages' is not designed for extension - needs to be abstract, final or empty. | 115 |
![]() | Parameter vertexId should be final. | 116 |
![]() | Avoid inline conditionals. | 119 |
![]() | ':' should be on a new line. | 119 |
![]() | Method 'getNumberOfMessages' is not designed for extension - needs to be abstract, final or empty. | 123 |
![]() | Method 'hasMessagesForVertex' is not designed for extension - needs to be abstract, final or empty. | 134 |
![]() | Parameter vertexId should be final. | 135 |
![]() | Avoid inline conditionals. | 138 |
![]() | Method 'getDestinationVertices' is not designed for extension - needs to be abstract, final or empty. | 141 |
![]() | Method 'getPartitionDestinationVertices' is not designed for extension - needs to be abstract, final or empty. | 150 |
![]() | Parameter partitionId should be final. | 151 |
![]() | Avoid inline conditionals. | 153 |
![]() | ':' should be on a new line. | 153 |
![]() | Method 'clearVertexMessages' is not designed for extension - needs to be abstract, final or empty. | 157 |
![]() | Parameter vertexId should be final. | 158 |
![]() | Method 'clearPartition' is not designed for extension - needs to be abstract, final or empty. | 166 |
![]() | Parameter partitionId should be final. | 167 |
![]() | Method 'clearAll' is not designed for extension - needs to be abstract, final or empty. | 171 |
![]() | First sentence should end with a period. | 176 |
![]() | Parameter vertexId should be final. | 182 |
![]() | Method 'writePartition' is not designed for extension - needs to be abstract, final or empty. | 186 |
![]() | Parameter out should be final. | 187 |
![]() | Parameter partitionId should be final. | 188 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 203 |
![]() | Parameter out should be final. | 204 |
![]() | Method 'readFieldsForPartition' is not designed for extension - needs to be abstract, final or empty. | 212 |
![]() | Parameter in should be final. | 213 |
![]() | Parameter partitionId should be final. | 214 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 234 |
![]() | Parameter in should be final. | 235 |
![]() | First sentence should end with a period. | 244 |
![]() | Parameter service should be final. | 258 |
![]() | Parameter config should be final. | 258 |
![]() | First sentence should end with a period. | 262 |
![]() | First sentence should end with a period. | 273 |
![]() | First sentence should end with a period. | 275 |
![]() | First sentence should end with a period. | 277 |
![]() | Parameter service should be final. | 284 |
![]() | 'service' hides a field. | 284 |
![]() | Parameter config should be final. | 285 |
![]() | 'config' hides a field. | 285 |
![]() | First sentence should end with a period. | 42 |
![]() | First sentence should end with a period. | 53 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 60 |
![]() | First sentence should end with a period. | 62 |
![]() | Parameter service should be final. | 70 |
![]() | 'service' hides a field. | 70 |
![]() | Parameter combiner should be final. | 71 |
![]() | 'combiner' hides a field. | 71 |
![]() | Parameter config should be final. | 71 |
![]() | 'config' hides a field. | 71 |
![]() | Method 'addVertexMessages' is not designed for extension - needs to be abstract, final or empty. | 78 |
![]() | Parameter vertexId should be final. | 79 |
![]() | Parameter messages should be final. | 80 |
![]() | Method 'addMessages' is not designed for extension - needs to be abstract, final or empty. | 102 |
![]() | Parameter messages should be final. | 103 |
![]() | Method 'addPartitionMessages' is not designed for extension - needs to be abstract, final or empty. | 109 |
![]() | Parameter messages should be final. | 110 |
![]() | Parameter partitionId should be final. | 111 |
![]() | Method 'getVertexMessages' is not designed for extension - needs to be abstract, final or empty. | 115 |
![]() | Parameter vertexId should be final. | 116 |
![]() | Avoid inline conditionals. | 119 |
![]() | ':' should be on a new line. | 119 |
![]() | Method 'getNumberOfMessages' is not designed for extension - needs to be abstract, final or empty. | 123 |
![]() | Method 'hasMessagesForVertex' is not designed for extension - needs to be abstract, final or empty. | 134 |
![]() | Parameter vertexId should be final. | 135 |
![]() | Avoid inline conditionals. | 138 |
![]() | Method 'getDestinationVertices' is not designed for extension - needs to be abstract, final or empty. | 141 |
![]() | Method 'getPartitionDestinationVertices' is not designed for extension - needs to be abstract, final or empty. | 150 |
![]() | Parameter partitionId should be final. | 151 |
![]() | Avoid inline conditionals. | 153 |
![]() | ':' should be on a new line. | 153 |
![]() | Method 'clearVertexMessages' is not designed for extension - needs to be abstract, final or empty. | 157 |
![]() | Parameter vertexId should be final. | 158 |
![]() | Method 'clearPartition' is not designed for extension - needs to be abstract, final or empty. | 166 |
![]() | Parameter partitionId should be final. | 167 |
![]() | Method 'clearAll' is not designed for extension - needs to be abstract, final or empty. | 171 |
![]() | First sentence should end with a period. | 176 |
![]() | Parameter vertexId should be final. | 182 |
![]() | Method 'writePartition' is not designed for extension - needs to be abstract, final or empty. | 186 |
![]() | Parameter out should be final. | 187 |
![]() | Parameter partitionId should be final. | 188 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 203 |
![]() | Parameter out should be final. | 204 |
![]() | Method 'readFieldsForPartition' is not designed for extension - needs to be abstract, final or empty. | 212 |
![]() | Parameter in should be final. | 213 |
![]() | Parameter partitionId should be final. | 214 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 234 |
![]() | Parameter in should be final. | 235 |
![]() | First sentence should end with a period. | 244 |
![]() | Parameter service should be final. | 258 |
![]() | Parameter config should be final. | 258 |
![]() | First sentence should end with a period. | 262 |
![]() | First sentence should end with a period. | 273 |
![]() | First sentence should end with a period. | 275 |
![]() | First sentence should end with a period. | 277 |
![]() | Parameter service should be final. | 284 |
![]() | 'service' hides a field. | 284 |
![]() | Parameter config should be final. | 285 |
![]() | 'config' hides a field. | 285 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 34 |
![]() | First sentence should end with a period. | 36 |
![]() | First sentence should end with a period. | 39 |
![]() | First sentence should end with a period. | 41 |
![]() | First sentence should end with a period. | 43 |
![]() | First sentence should end with a period. | 45 |
![]() | First sentence should end with a period. | 47 |
![]() | Method 'handleUpstream' is not designed for extension - needs to be abstract, final or empty. | 51 |
![]() | Parameter ctx should be final. | 52 |
![]() | Parameter e should be final. | 52 |
![]() | '&&' should be on a new line. | 54 |
![]() | Method 'handleDownstream' is not designed for extension - needs to be abstract, final or empty. | 64 |
![]() | Parameter ctx should be final. | 65 |
![]() | Parameter e should be final. | 65 |
![]() | '&&' should be on a new line. | 67 |
![]() | First sentence should end with a period. | 94 |
![]() | Method 'resetAll' is not designed for extension - needs to be abstract, final or empty. | 97 |
![]() | Method 'getBytesSent' is not designed for extension - needs to be abstract, final or empty. | 102 |
![]() | Missing a Javadoc comment. | 102 |
![]() | Method 'getBytesReceived' is not designed for extension - needs to be abstract, final or empty. | 106 |
![]() | Missing a Javadoc comment. | 106 |
![]() | Method 'getMbytesPerSecSent' is not designed for extension - needs to be abstract, final or empty. | 113 |
![]() | '1000f' is a magic number. | 114 |
![]() | '/' should be on a new line. | 114 |
![]() | Method 'getMbytesPerSecReceived' is not designed for extension - needs to be abstract, final or empty. | 121 |
![]() | '1000f' is a magic number. | 122 |
![]() | '/' should be on a new line. | 122 |
![]() | Method 'getMetrics' is not designed for extension - needs to be abstract, final or empty. | 129 |
![]() | Avoid inline conditionals. | 135 |
![]() | Avoid inline conditionals. | 137 |
![]() | '+' should be on a new line. | 138 |
![]() | '+' should be on a new line. | 139 |
![]() | '+' should be on a new line. | 140 |
![]() | '+' should be on a new line. | 141 |
![]() | '+' should be on a new line. | 142 |
![]() | '+' should be on a new line. | 143 |
![]() | '+' should be on a new line. | 144 |
![]() | '+' should be on a new line. | 145 |
![]() | '+' should be on a new line. | 146 |
![]() | '+' should be on a new line. | 147 |
![]() | '+' should be on a new line. | 148 |
![]() | '1000f' is a magic number. | 149 |
![]() | Method 'getMetricsWindow' is not designed for extension - needs to be abstract, final or empty. | 159 |
![]() | Parameter minMsecsWindow should be final. | 159 |
![]() | First sentence should end with a period. | 34 |
![]() | First sentence should end with a period. | 36 |
![]() | First sentence should end with a period. | 39 |
![]() | First sentence should end with a period. | 41 |
![]() | First sentence should end with a period. | 43 |
![]() | First sentence should end with a period. | 45 |
![]() | First sentence should end with a period. | 47 |
![]() | Method 'handleUpstream' is not designed for extension - needs to be abstract, final or empty. | 51 |
![]() | Parameter ctx should be final. | 52 |
![]() | Parameter e should be final. | 52 |
![]() | '&&' should be on a new line. | 54 |
![]() | Method 'handleDownstream' is not designed for extension - needs to be abstract, final or empty. | 64 |
![]() | Parameter ctx should be final. | 65 |
![]() | Parameter e should be final. | 65 |
![]() | '&&' should be on a new line. | 67 |
![]() | First sentence should end with a period. | 94 |
![]() | Method 'resetAll' is not designed for extension - needs to be abstract, final or empty. | 97 |
![]() | Method 'getBytesSent' is not designed for extension - needs to be abstract, final or empty. | 102 |
![]() | Missing a Javadoc comment. | 102 |
![]() | Method 'getBytesReceived' is not designed for extension - needs to be abstract, final or empty. | 106 |
![]() | Missing a Javadoc comment. | 106 |
![]() | Method 'getMbytesPerSecSent' is not designed for extension - needs to be abstract, final or empty. | 113 |
![]() | '1000f' is a magic number. | 114 |
![]() | '/' should be on a new line. | 114 |
![]() | Method 'getMbytesPerSecReceived' is not designed for extension - needs to be abstract, final or empty. | 121 |
![]() | '1000f' is a magic number. | 122 |
![]() | '/' should be on a new line. | 122 |
![]() | Method 'getMetrics' is not designed for extension - needs to be abstract, final or empty. | 129 |
![]() | Avoid inline conditionals. | 135 |
![]() | Avoid inline conditionals. | 137 |
![]() | '+' should be on a new line. | 138 |
![]() | '+' should be on a new line. | 139 |
![]() | '+' should be on a new line. | 140 |
![]() | '+' should be on a new line. | 141 |
![]() | '+' should be on a new line. | 142 |
![]() | '+' should be on a new line. | 143 |
![]() | '+' should be on a new line. | 144 |
![]() | '+' should be on a new line. | 145 |
![]() | '+' should be on a new line. | 146 |
![]() | '+' should be on a new line. | 147 |
![]() | '+' should be on a new line. | 148 |
![]() | '1000f' is a magic number. | 149 |
![]() | Method 'getMetricsWindow' is not designed for extension - needs to be abstract, final or empty. | 159 |
![]() | Parameter minMsecsWindow should be final. | 159 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 26 |
![]() | First sentence should end with a period. | 30 |
![]() | First sentence should end with a period. | 32 |
![]() | First sentence should end with a period. | 35 |
![]() | Method 'addChannel' is not designed for extension - needs to be abstract, final or empty. | 40 |
![]() | Parameter channel should be final. | 40 |
![]() | First sentence should end with a period. | 44 |
![]() | Method 'nextChannel' is not designed for extension - needs to be abstract, final or empty. | 49 |
![]() | First sentence should end with a period. | 58 |
![]() | Method 'removeLast' is not designed for extension - needs to be abstract, final or empty. | 63 |
![]() | First sentence should end with a period. | 69 |
![]() | First sentence should end with a period. | 79 |
![]() | Method 'getChannels' is not designed for extension - needs to be abstract, final or empty. | 84 |
![]() | First sentence should end with a period. | 26 |
![]() | First sentence should end with a period. | 30 |
![]() | First sentence should end with a period. | 32 |
![]() | First sentence should end with a period. | 35 |
![]() | Method 'addChannel' is not designed for extension - needs to be abstract, final or empty. | 40 |
![]() | Parameter channel should be final. | 40 |
![]() | First sentence should end with a period. | 44 |
![]() | Method 'nextChannel' is not designed for extension - needs to be abstract, final or empty. | 49 |
![]() | First sentence should end with a period. | 58 |
![]() | Method 'removeLast' is not designed for extension - needs to be abstract, final or empty. | 63 |
![]() | First sentence should end with a period. | 69 |
![]() | First sentence should end with a period. | 79 |
![]() | Method 'getChannels' is not designed for extension - needs to be abstract, final or empty. | 84 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 61 |
![]() | First sentence should end with a period. | 64 |
![]() | First sentence should end with a period. | 66 |
![]() | First sentence should end with a period. | 69 |
![]() | First sentence should end with a period. | 71 |
![]() | First sentence should end with a period. | 73 |
![]() | First sentence should end with a period. | 75 |
![]() | First sentence should end with a period. | 77 |
![]() | First sentence should end with a period. | 79 |
![]() | First sentence should end with a period. | 81 |
![]() | First sentence should end with a period. | 92 |
![]() | First sentence should end with a period. | 94 |
![]() | First sentence should end with a period. | 96 |
![]() | First sentence should end with a period. | 98 |
![]() | First sentence should end with a period. | 100 |
![]() | First sentence should end with a period. | 102 |
![]() | First sentence should end with a period. | 104 |
![]() | First sentence should end with a period. | 106 |
![]() | First sentence should end with a period. | 108 |
![]() | First sentence should end with a period. | 110 |
![]() | First sentence should end with a period. | 112 |
![]() | First sentence should end with a period. | 114 |
![]() | First sentence should end with a period. | 116 |
![]() | First sentence should end with a period. | 118 |
![]() | First sentence should end with a period. | 121 |
![]() | First sentence should end with a period. | 124 |
![]() | Parameter context should be final. | 129 |
![]() | 'context' hides a field. | 129 |
![]() | '+' should be on a new line. | 148 |
![]() | First sentence should end with a period. | 215 |
![]() | First sentence should end with a period. | 217 |
![]() | Parameter future should be final. | 226 |
![]() | 'future' hides a field. | 226 |
![]() | Parameter address should be final. | 226 |
![]() | 'address' hides a field. | 226 |
![]() | First sentence should end with a period. | 232 |
![]() | Method 'connectAllAddresses' is not designed for extension - needs to be abstract, final or empty. | 237 |
![]() | Parameter addresses should be final. | 237 |
![]() | '||' should be on a new line. | 242 |
![]() | '+' should be on a new line. | 244 |
![]() | '+' should be on a new line. | 248 |
![]() | '+' should be on a new line. | 275 |
![]() | '+' should be on a new line. | 276 |
![]() | '+' should be on a new line. | 287 |
![]() | '+' should be on a new line. | 306 |
![]() | '+' should be on a new line. | 307 |
![]() | '+' should be on a new line. | 308 |
![]() | '+' should be on a new line. | 309 |
![]() | Method 'stop' is not designed for extension - needs to be abstract, final or empty. | 325 |
![]() | Parameter cf should be final. | 340 |
![]() | '+' should be on a new line. | 344 |
![]() | '+' should be on a new line. | 345 |
![]() | First sentence should end with a period. | 358 |
![]() | Parameter remoteServer should be final. | 364 |
![]() | '+' should be on a new line. | 379 |
![]() | '+' should be on a new line. | 380 |
![]() | '+' should be on a new line. | 396 |
![]() | '+' should be on a new line. | 397 |
![]() | '5000' is a magic number. | 401 |
![]() | '+' should be on a new line. | 406 |
![]() | '+' should be on a new line. | 407 |
![]() | First sentence should end with a period. | 411 |
![]() | Method 'sendWritableRequest' is not designed for extension - needs to be abstract, final or empty. | 418 |
![]() | Parameter destWorkerId should be final. | 418 |
![]() | Parameter remoteServer should be final. | 419 |
![]() | Parameter request should be final. | 420 |
![]() | '+' should be on a new line. | 435 |
![]() | '+' should be on a new line. | 436 |
![]() | '&&' should be on a new line. | 442 |
![]() | Method 'waitAllRequests' is not designed for extension - needs to be abstract, final or empty. | 453 |
![]() | '+' should be on a new line. | 456 |
![]() | Parameter maxOpenRequests should be final. | 469 |
![]() | '+' should be on a new line. | 476 |
![]() | '+' should be on a new line. | 477 |
![]() | '+' should be on a new line. | 478 |
![]() | '+' should be on a new line. | 479 |
![]() | ':' should be on a new line. | 483 |
![]() | '+' should be on a new line. | 485 |
![]() | ':' should be on a new line. | 501 |
![]() | '||' should be on a new line. | 507 |
![]() | '||' should be on a new line. | 508 |
![]() | '+' should be on a new line. | 510 |
![]() | '+' should be on a new line. | 511 |
![]() | '+' should be on a new line. | 512 |
![]() | '+' should be on a new line. | 513 |
![]() | '+' should be on a new line. | 514 |
![]() | '+' should be on a new line. | 515 |
![]() | '+' should be on a new line. | 516 |
![]() | '+' should be on a new line. | 517 |
![]() | '==' should be on a new line. | 530 |
![]() | '+' should be on a new line. | 532 |
![]() | Unused @throws tag for 'ArrayIndexOutOfBoundsException'. | 551 |
![]() | Method 'getChannelConfig' is not designed for extension - needs to be abstract, final or empty. | 555 |
![]() | First sentence should end with a period. | 61 |
![]() | First sentence should end with a period. | 64 |
![]() | First sentence should end with a period. | 66 |
![]() | First sentence should end with a period. | 69 |
![]() | First sentence should end with a period. | 71 |
![]() | First sentence should end with a period. | 73 |
![]() | First sentence should end with a period. | 75 |
![]() | First sentence should end with a period. | 77 |
![]() | First sentence should end with a period. | 79 |
![]() | First sentence should end with a period. | 81 |
![]() | First sentence should end with a period. | 92 |
![]() | First sentence should end with a period. | 94 |
![]() | First sentence should end with a period. | 96 |
![]() | First sentence should end with a period. | 98 |
![]() | First sentence should end with a period. | 100 |
![]() | First sentence should end with a period. | 102 |
![]() | First sentence should end with a period. | 104 |
![]() | First sentence should end with a period. | 106 |
![]() | First sentence should end with a period. | 108 |
![]() | First sentence should end with a period. | 110 |
![]() | First sentence should end with a period. | 112 |
![]() | First sentence should end with a period. | 114 |
![]() | First sentence should end with a period. | 116 |
![]() | First sentence should end with a period. | 118 |
![]() | First sentence should end with a period. | 121 |
![]() | First sentence should end with a period. | 124 |
![]() | Parameter context should be final. | 129 |
![]() | 'context' hides a field. | 129 |
![]() | '+' should be on a new line. | 148 |
![]() | First sentence should end with a period. | 215 |
![]() | First sentence should end with a period. | 217 |
![]() | Parameter future should be final. | 226 |
![]() | 'future' hides a field. | 226 |
![]() | Parameter address should be final. | 226 |
![]() | 'address' hides a field. | 226 |
![]() | First sentence should end with a period. | 232 |
![]() | Method 'connectAllAddresses' is not designed for extension - needs to be abstract, final or empty. | 237 |
![]() | Parameter addresses should be final. | 237 |
![]() | '||' should be on a new line. | 242 |
![]() | '+' should be on a new line. | 244 |
![]() | '+' should be on a new line. | 248 |
![]() | '+' should be on a new line. | 275 |
![]() | '+' should be on a new line. | 276 |
![]() | '+' should be on a new line. | 287 |
![]() | '+' should be on a new line. | 306 |
![]() | '+' should be on a new line. | 307 |
![]() | '+' should be on a new line. | 308 |
![]() | '+' should be on a new line. | 309 |
![]() | Method 'stop' is not designed for extension - needs to be abstract, final or empty. | 325 |
![]() | Parameter cf should be final. | 340 |
![]() | '+' should be on a new line. | 344 |
![]() | '+' should be on a new line. | 345 |
![]() | First sentence should end with a period. | 358 |
![]() | Parameter remoteServer should be final. | 364 |
![]() | '+' should be on a new line. | 379 |
![]() | '+' should be on a new line. | 380 |
![]() | '+' should be on a new line. | 396 |
![]() | '+' should be on a new line. | 397 |
![]() | '5000' is a magic number. | 401 |
![]() | '+' should be on a new line. | 406 |
![]() | '+' should be on a new line. | 407 |
![]() | First sentence should end with a period. | 411 |
![]() | Method 'sendWritableRequest' is not designed for extension - needs to be abstract, final or empty. | 418 |
![]() | Parameter destWorkerId should be final. | 418 |
![]() | Parameter remoteServer should be final. | 419 |
![]() | Parameter request should be final. | 420 |
![]() | '+' should be on a new line. | 435 |
![]() | '+' should be on a new line. | 436 |
![]() | '&&' should be on a new line. | 442 |
![]() | Method 'waitAllRequests' is not designed for extension - needs to be abstract, final or empty. | 453 |
![]() | '+' should be on a new line. | 456 |
![]() | Parameter maxOpenRequests should be final. | 469 |
![]() | '+' should be on a new line. | 476 |
![]() | '+' should be on a new line. | 477 |
![]() | '+' should be on a new line. | 478 |
![]() | '+' should be on a new line. | 479 |
![]() | ':' should be on a new line. | 483 |
![]() | '+' should be on a new line. | 485 |
![]() | ':' should be on a new line. | 501 |
![]() | '||' should be on a new line. | 507 |
![]() | '||' should be on a new line. | 508 |
![]() | '+' should be on a new line. | 510 |
![]() | '+' should be on a new line. | 511 |
![]() | '+' should be on a new line. | 512 |
![]() | '+' should be on a new line. | 513 |
![]() | '+' should be on a new line. | 514 |
![]() | '+' should be on a new line. | 515 |
![]() | '+' should be on a new line. | 516 |
![]() | '+' should be on a new line. | 517 |
![]() | '==' should be on a new line. | 530 |
![]() | '+' should be on a new line. | 532 |
![]() | Unused @throws tag for 'ArrayIndexOutOfBoundsException'. | 551 |
![]() | Method 'getChannelConfig' is not designed for extension - needs to be abstract, final or empty. | 555 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 33 |
![]() | First sentence should end with a period. | 37 |
![]() | First sentence should end with a period. | 39 |
![]() | First sentence should end with a period. | 42 |
![]() | Parameter context should be final. | 47 |
![]() | Method 'fixWorkerAddresses' is not designed for extension - needs to be abstract, final or empty. | 52 |
![]() | Parameter workers should be final. | 53 |
![]() | 'workers' hides a field. | 53 |
![]() | Method 'flush' is not designed for extension - needs to be abstract, final or empty. | 64 |
![]() | Method 'closeConnections' is not designed for extension - needs to be abstract, final or empty. | 69 |
![]() | First sentence should end with a period. | 33 |
![]() | First sentence should end with a period. | 37 |
![]() | First sentence should end with a period. | 39 |
![]() | First sentence should end with a period. | 42 |
![]() | Parameter context should be final. | 47 |
![]() | Method 'fixWorkerAddresses' is not designed for extension - needs to be abstract, final or empty. | 52 |
![]() | Parameter workers should be final. | 53 |
![]() | 'workers' hides a field. | 53 |
![]() | Method 'flush' is not designed for extension - needs to be abstract, final or empty. | 64 |
![]() | Method 'closeConnections' is not designed for extension - needs to be abstract, final or empty. | 69 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 33 |
![]() | First sentence should end with a period. | 35 |
![]() | First sentence should end with a period. | 38 |
![]() | Parameter context should be final. | 43 |
![]() | Method 'fixWorkerAddresses' is not designed for extension - needs to be abstract, final or empty. | 48 |
![]() | Parameter workers should be final. | 49 |
![]() | Method 'flush' is not designed for extension - needs to be abstract, final or empty. | 53 |
![]() | Method 'closeConnections' is not designed for extension - needs to be abstract, final or empty. | 58 |
![]() | Method 'getMyAddress' is not designed for extension - needs to be abstract, final or empty. | 63 |
![]() | Method 'close' is not designed for extension - needs to be abstract, final or empty. | 68 |
![]() | First sentence should end with a period. | 33 |
![]() | First sentence should end with a period. | 35 |
![]() | First sentence should end with a period. | 38 |
![]() | Parameter context should be final. | 43 |
![]() | Method 'fixWorkerAddresses' is not designed for extension - needs to be abstract, final or empty. | 48 |
![]() | Parameter workers should be final. | 49 |
![]() | Method 'flush' is not designed for extension - needs to be abstract, final or empty. | 53 |
![]() | Method 'closeConnections' is not designed for extension - needs to be abstract, final or empty. | 58 |
![]() | Method 'getMyAddress' is not designed for extension - needs to be abstract, final or empty. | 63 |
![]() | Method 'close' is not designed for extension - needs to be abstract, final or empty. | 68 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 31 |
![]() | First sentence should end with a period. | 34 |
![]() | Parameter conf should be final. | 39 |
![]() | Method 'getMyAddress' is not designed for extension - needs to be abstract, final or empty. | 45 |
![]() | Method 'close' is not designed for extension - needs to be abstract, final or empty. | 50 |
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 31 |
![]() | First sentence should end with a period. | 34 |
![]() | Parameter conf should be final. | 39 |
![]() | Method 'getMyAddress' is not designed for extension - needs to be abstract, final or empty. | 45 |
![]() | Method 'close' is not designed for extension - needs to be abstract, final or empty. | 50 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 47 |
![]() | First sentence should end with a period. | 51 |
![]() | First sentence should end with a period. | 53 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 57 |
![]() | First sentence should end with a period. | 59 |
![]() | First sentence should end with a period. | 61 |
![]() | First sentence should end with a period. | 63 |
![]() | First sentence should end with a period. | 65 |
![]() | First sentence should end with a period. | 67 |
![]() | First sentence should end with a period. | 69 |
![]() | First sentence should end with a period. | 71 |
![]() | First sentence should end with a period. | 73 |
![]() | First sentence should end with a period. | 75 |
![]() | First sentence should end with a period. | 77 |
![]() | First sentence should end with a period. | 79 |
![]() | First sentence should end with a period. | 81 |
![]() | First sentence should end with a period. | 83 |
![]() | First sentence should end with a period. | 86 |
![]() | Parameter conf should be final. | 92 |
![]() | 'conf' hides a field. | 92 |
![]() | Parameter requestServerHandlerFactory should be final. | 93 |
![]() | 'requestServerHandlerFactory' hides a field. | 93 |
![]() | First sentence should end with a period. | 128 |
![]() | Method 'start' is not designed for extension - needs to be abstract, final or empty. | 131 |
![]() | '1024' is a magic number. | 144 |
![]() | '1024' is a magic number. | 144 |
![]() | '1024' is a magic number. | 144 |
![]() | '4' is a magic number. | 144 |
![]() | '4' is a magic number. | 144 |
![]() | '10' is a magic number. | 156 |
![]() | '+' should be on a new line. | 158 |
![]() | '+' should be on a new line. | 176 |
![]() | '+' should be on a new line. | 177 |
![]() | '+' should be on a new line. | 191 |
![]() | '+' should be on a new line. | 199 |
![]() | '+' should be on a new line. | 204 |
![]() | '+' should be on a new line. | 205 |
![]() | '+' should be on a new line. | 206 |
![]() | '+' should be on a new line. | 207 |
![]() | '+' should be on a new line. | 208 |
![]() | Method 'stop' is not designed for extension - needs to be abstract, final or empty. | 216 |
![]() | Method 'getMyAddress' is not designed for extension - needs to be abstract, final or empty. | 227 |
![]() | Missing a Javadoc comment. | 227 |
![]() | First sentence should end with a period. | 47 |
![]() | First sentence should end with a period. | 51 |
![]() | First sentence should end with a period. | 53 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 57 |
![]() | First sentence should end with a period. | 59 |
![]() | First sentence should end with a period. | 61 |
![]() | First sentence should end with a period. | 63 |
![]() | First sentence should end with a period. | 65 |
![]() | First sentence should end with a period. | 67 |
![]() | First sentence should end with a period. | 69 |
![]() | First sentence should end with a period. | 71 |
![]() | First sentence should end with a period. | 73 |
![]() | First sentence should end with a period. | 75 |
![]() | First sentence should end with a period. | 77 |
![]() | First sentence should end with a period. | 79 |
![]() | First sentence should end with a period. | 81 |
![]() | First sentence should end with a period. | 83 |
![]() | First sentence should end with a period. | 86 |
![]() | Parameter conf should be final. | 92 |
![]() | 'conf' hides a field. | 92 |
![]() | Parameter requestServerHandlerFactory should be final. | 93 |
![]() | 'requestServerHandlerFactory' hides a field. | 93 |
![]() | First sentence should end with a period. | 128 |
![]() | Method 'start' is not designed for extension - needs to be abstract, final or empty. | 131 |
![]() | '1024' is a magic number. | 144 |
![]() | '1024' is a magic number. | 144 |
![]() | '1024' is a magic number. | 144 |
![]() | '4' is a magic number. | 144 |
![]() | '4' is a magic number. | 144 |
![]() | '10' is a magic number. | 156 |
![]() | '+' should be on a new line. | 158 |
![]() | '+' should be on a new line. | 176 |
![]() | '+' should be on a new line. | 177 |
![]() | '+' should be on a new line. | 191 |
![]() | '+' should be on a new line. | 199 |
![]() | '+' should be on a new line. | 204 |
![]() | '+' should be on a new line. | 205 |
![]() | '+' should be on a new line. | 206 |
![]() | '+' should be on a new line. | 207 |
![]() | '+' should be on a new line. | 208 |
![]() | Method 'stop' is not designed for extension - needs to be abstract, final or empty. | 216 |
![]() | Method 'getMyAddress' is not designed for extension - needs to be abstract, final or empty. | 227 |
![]() | Missing a Javadoc comment. | 227 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 70 |
![]() | First sentence should end with a period. | 73 |
![]() | First sentence should end with a period. | 75 |
![]() | First sentence should end with a period. | 77 |
![]() | First sentence should end with a period. | 84 |
![]() | First sentence should end with a period. | 88 |
![]() | First sentence should end with a period. | 92 |
![]() | First sentence should end with a period. | 94 |
![]() | First sentence should end with a period. | 96 |
![]() | First sentence should end with a period. | 98 |
![]() | First sentence should end with a period. | 100 |
![]() | Parameter context should be final. | 110 |
![]() | Parameter service should be final. | 111 |
![]() | 'service' hides a field. | 111 |
![]() | Parameter serverData should be final. | 112 |
![]() | 'serverData' hides a field. | 112 |
![]() | Method 'fixPartitionIdToSocketAddrMap' is not designed for extension - needs to be abstract, final or empty. | 128 |
![]() | '&&' should be on a new line. | 138 |
![]() | '||' should be on a new line. | 140 |
![]() | '!=' should be on a new line. | 141 |
![]() | '+' should be on a new line. | 144 |
![]() | '+' should be on a new line. | 145 |
![]() | '+' should be on a new line. | 146 |
![]() | '!=' should be on a new line. | 154 |
![]() | Parameter workerInfo should be final. | 175 |
![]() | Parameter partitionId should be final. | 176 |
![]() | '&&' should be on a new line. | 182 |
![]() | '+' should be on a new line. | 186 |
![]() | '+' should be on a new line. | 187 |
![]() | '5000' is a magic number. | 190 |
![]() | '+' should be on a new line. | 196 |
![]() | First sentence should end with a period. | 205 |
![]() | Parameter workerInfo should be final. | 212 |
![]() | Parameter remoteServerAddress should be final. | 213 |
![]() | Parameter writableRequest should be final. | 214 |
![]() | '==' should be on a new line. | 216 |
![]() | Method 'sendMessageRequest' is not designed for extension - needs to be abstract, final or empty. | 225 |
![]() | Parameter destVertexId should be final. | 226 |
![]() | Parameter message should be final. | 226 |
![]() | '+' should be on a new line. | 231 |
![]() | Method 'sendPartitionRequest' is not designed for extension - needs to be abstract, final or empty. | 254 |
![]() | Parameter workerInfo should be final. | 255 |
![]() | Parameter partition should be final. | 256 |
![]() | '+' should be on a new line. | 260 |
![]() | ':' should be on a new line. | 275 |
![]() | Parameter partitionId should be final. | 309 |
![]() | Parameter partitionOwner should be final. | 309 |
![]() | Parameter partitionMutationCount should be final. | 310 |
![]() | Method 'addEdgeRequest' is not designed for extension - needs to be abstract, final or empty. | 325 |
![]() | Parameter vertexIndex should be final. | 326 |
![]() | Parameter edge should be final. | 326 |
![]() | '+' should be on a new line. | 332 |
![]() | Method 'removeEdgeRequest' is not designed for extension - needs to be abstract, final or empty. | 344 |
![]() | Parameter vertexIndex should be final. | 345 |
![]() | Parameter destinationVertexIndex should be final. | 346 |
![]() | '+' should be on a new line. | 351 |
![]() | Method 'addVertexRequest' is not designed for extension - needs to be abstract, final or empty. | 364 |
![]() | Parameter vertex should be final. | 365 |
![]() | '+' should be on a new line. | 370 |
![]() | Method 'removeVertexRequest' is not designed for extension - needs to be abstract, final or empty. | 382 |
![]() | Parameter vertexIndex should be final. | 383 |
![]() | '+' should be on a new line. | 388 |
![]() | Method 'flush' is not designed for extension - needs to be abstract, final or empty. | 400 |
![]() | ':' should be on a new line. | 405 |
![]() | ':' should be on a new line. | 423 |
![]() | Method 'resetMessageCount' is not designed for extension - needs to be abstract, final or empty. | 441 |
![]() | Method 'closeConnections' is not designed for extension - needs to be abstract, final or empty. | 448 |
![]() | Method 'setup' is not designed for extension - needs to be abstract, final or empty. | 453 |
![]() | First sentence should end with a period. | 70 |
![]() | First sentence should end with a period. | 73 |
![]() | First sentence should end with a period. | 75 |
![]() | First sentence should end with a period. | 77 |
![]() | First sentence should end with a period. | 84 |
![]() | First sentence should end with a period. | 88 |
![]() | First sentence should end with a period. | 92 |
![]() | First sentence should end with a period. | 94 |
![]() | First sentence should end with a period. | 96 |
![]() | First sentence should end with a period. | 98 |
![]() | First sentence should end with a period. | 100 |
![]() | Parameter context should be final. | 110 |
![]() | Parameter service should be final. | 111 |
![]() | 'service' hides a field. | 111 |
![]() | Parameter serverData should be final. | 112 |
![]() | 'serverData' hides a field. | 112 |
![]() | Method 'fixPartitionIdToSocketAddrMap' is not designed for extension - needs to be abstract, final or empty. | 128 |
![]() | '&&' should be on a new line. | 138 |
![]() | '||' should be on a new line. | 140 |
![]() | '!=' should be on a new line. | 141 |
![]() | '+' should be on a new line. | 144 |
![]() | '+' should be on a new line. | 145 |
![]() | '+' should be on a new line. | 146 |
![]() | '!=' should be on a new line. | 154 |
![]() | Parameter workerInfo should be final. | 175 |
![]() | Parameter partitionId should be final. | 176 |
![]() | '&&' should be on a new line. | 182 |
![]() | '+' should be on a new line. | 186 |
![]() | '+' should be on a new line. | 187 |
![]() | '5000' is a magic number. | 190 |
![]() | '+' should be on a new line. | 196 |
![]() | First sentence should end with a period. | 205 |
![]() | Parameter workerInfo should be final. | 212 |
![]() | Parameter remoteServerAddress should be final. | 213 |
![]() | Parameter writableRequest should be final. | 214 |
![]() | '==' should be on a new line. | 216 |
![]() | Method 'sendMessageRequest' is not designed for extension - needs to be abstract, final or empty. | 225 |
![]() | Parameter destVertexId should be final. | 226 |
![]() | Parameter message should be final. | 226 |
![]() | '+' should be on a new line. | 231 |
![]() | Method 'sendPartitionRequest' is not designed for extension - needs to be abstract, final or empty. | 254 |
![]() | Parameter workerInfo should be final. | 255 |
![]() | Parameter partition should be final. | 256 |
![]() | '+' should be on a new line. | 260 |
![]() | ':' should be on a new line. | 275 |
![]() | Parameter partitionId should be final. | 309 |
![]() | Parameter partitionOwner should be final. | 309 |
![]() | Parameter partitionMutationCount should be final. | 310 |
![]() | Method 'addEdgeRequest' is not designed for extension - needs to be abstract, final or empty. | 325 |
![]() | Parameter vertexIndex should be final. | 326 |
![]() | Parameter edge should be final. | 326 |
![]() | '+' should be on a new line. | 332 |
![]() | Method 'removeEdgeRequest' is not designed for extension - needs to be abstract, final or empty. | 344 |
![]() | Parameter vertexIndex should be final. | 345 |
![]() | Parameter destinationVertexIndex should be final. | 346 |
![]() | '+' should be on a new line. | 351 |
![]() | Method 'addVertexRequest' is not designed for extension - needs to be abstract, final or empty. | 364 |
![]() | Parameter vertex should be final. | 365 |
![]() | '+' should be on a new line. | 370 |
![]() | Method 'removeVertexRequest' is not designed for extension - needs to be abstract, final or empty. | 382 |
![]() | Parameter vertexIndex should be final. | 383 |
![]() | '+' should be on a new line. | 388 |
![]() | Method 'flush' is not designed for extension - needs to be abstract, final or empty. | 400 |
![]() | ':' should be on a new line. | 405 |
![]() | ':' should be on a new line. | 423 |
![]() | Method 'resetMessageCount' is not designed for extension - needs to be abstract, final or empty. | 441 |
![]() | Method 'closeConnections' is not designed for extension - needs to be abstract, final or empty. | 448 |
![]() | Method 'setup' is not designed for extension - needs to be abstract, final or empty. | 453 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 48 |
![]() | First sentence should end with a period. | 50 |
![]() | Parameter context should be final. | 59 |
![]() | Parameter service should be final. | 60 |
![]() | Method 'fixPartitionIdToSocketAddrMap' is not designed for extension - needs to be abstract, final or empty. | 67 |
![]() | Method 'sendMessageRequest' is not designed for extension - needs to be abstract, final or empty. | 72 |
![]() | Parameter destVertexId should be final. | 73 |
![]() | Parameter message should be final. | 73 |
![]() | Method 'sendPartitionRequest' is not designed for extension - needs to be abstract, final or empty. | 77 |
![]() | Parameter workerInfo should be final. | 78 |
![]() | Parameter partition should be final. | 79 |
![]() | Method 'addEdgeRequest' is not designed for extension - needs to be abstract, final or empty. | 83 |
![]() | Parameter vertexIndex should be final. | 84 |
![]() | Parameter edge should be final. | 84 |
![]() | Method 'removeEdgeRequest' is not designed for extension - needs to be abstract, final or empty. | 89 |
![]() | Parameter vertexIndex should be final. | 90 |
![]() | Parameter destinationVertexIndex should be final. | 91 |
![]() | Method 'addVertexRequest' is not designed for extension - needs to be abstract, final or empty. | 95 |
![]() | Parameter vertex should be final. | 96 |
![]() | Method 'removeVertexRequest' is not designed for extension - needs to be abstract, final or empty. | 100 |
![]() | Parameter vertexIndex should be final. | 101 |
![]() | Method 'flush' is not designed for extension - needs to be abstract, final or empty. | 105 |
![]() | Method 'resetMessageCount' is not designed for extension - needs to be abstract, final or empty. | 110 |
![]() | Method 'closeConnections' is not designed for extension - needs to be abstract, final or empty. | 115 |
![]() | Method 'setup' is not designed for extension - needs to be abstract, final or empty. | 120 |
![]() | Method 'prepareSuperstep' is not designed for extension - needs to be abstract, final or empty. | 125 |
![]() | Method 'getServerData' is not designed for extension - needs to be abstract, final or empty. | 130 |
![]() | Method 'close' is not designed for extension - needs to be abstract, final or empty. | 135 |
![]() | Method 'getPort' is not designed for extension - needs to be abstract, final or empty. | 141 |
![]() | First sentence should end with a period. | 48 |
![]() | First sentence should end with a period. | 50 |
![]() | Parameter context should be final. | 59 |
![]() | Parameter service should be final. | 60 |
![]() | Method 'fixPartitionIdToSocketAddrMap' is not designed for extension - needs to be abstract, final or empty. | 67 |
![]() | Method 'sendMessageRequest' is not designed for extension - needs to be abstract, final or empty. | 72 |
![]() | Parameter destVertexId should be final. | 73 |
![]() | Parameter message should be final. | 73 |
![]() | Method 'sendPartitionRequest' is not designed for extension - needs to be abstract, final or empty. | 77 |
![]() | Parameter workerInfo should be final. | 78 |
![]() | Parameter partition should be final. | 79 |
![]() | Method 'addEdgeRequest' is not designed for extension - needs to be abstract, final or empty. | 83 |
![]() | Parameter vertexIndex should be final. | 84 |
![]() | Parameter edge should be final. | 84 |
![]() | Method 'removeEdgeRequest' is not designed for extension - needs to be abstract, final or empty. | 89 |
![]() | Parameter vertexIndex should be final. | 90 |
![]() | Parameter destinationVertexIndex should be final. | 91 |
![]() | Method 'addVertexRequest' is not designed for extension - needs to be abstract, final or empty. | 95 |
![]() | Parameter vertex should be final. | 96 |
![]() | Method 'removeVertexRequest' is not designed for extension - needs to be abstract, final or empty. | 100 |
![]() | Parameter vertexIndex should be final. | 101 |
![]() | Method 'flush' is not designed for extension - needs to be abstract, final or empty. | 105 |
![]() | Method 'resetMessageCount' is not designed for extension - needs to be abstract, final or empty. | 110 |
![]() | Method 'closeConnections' is not designed for extension - needs to be abstract, final or empty. | 115 |
![]() | Method 'setup' is not designed for extension - needs to be abstract, final or empty. | 120 |
![]() | Method 'prepareSuperstep' is not designed for extension - needs to be abstract, final or empty. | 125 |
![]() | Method 'getServerData' is not designed for extension - needs to be abstract, final or empty. | 130 |
![]() | Method 'close' is not designed for extension - needs to be abstract, final or empty. | 135 |
![]() | Method 'getPort' is not designed for extension - needs to be abstract, final or empty. | 141 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 61 |
![]() | First sentence should end with a period. | 64 |
![]() | First sentence should end with a period. | 66 |
![]() | First sentence should end with a period. | 68 |
![]() | First sentence should end with a period. | 70 |
![]() | Parameter conf should be final. | 79 |
![]() | 'conf' hides a field. | 79 |
![]() | Parameter service should be final. | 80 |
![]() | 'service' hides a field. | 80 |
![]() | Method 'getPort' is not designed for extension - needs to be abstract, final or empty. | 109 |
![]() | Method 'prepareSuperstep' is not designed for extension - needs to be abstract, final or empty. | 114 |
![]() | '+' should be on a new line. | 127 |
![]() | '+' should be on a new line. | 138 |
![]() | '+' should be on a new line. | 165 |
![]() | '+' should be on a new line. | 166 |
![]() | '+' should be on a new line. | 167 |
![]() | '+' should be on a new line. | 168 |
![]() | '+' should be on a new line. | 169 |
![]() | '+' should be on a new line. | 177 |
![]() | '+' should be on a new line. | 178 |
![]() | '+' should be on a new line. | 189 |
![]() | '+' should be on a new line. | 190 |
![]() | Method 'getServerData' is not designed for extension - needs to be abstract, final or empty. | 195 |
![]() | Method 'close' is not designed for extension - needs to be abstract, final or empty. | 200 |
![]() | First sentence should end with a period. | 61 |
![]() | First sentence should end with a period. | 64 |
![]() | First sentence should end with a period. | 66 |
![]() | First sentence should end with a period. | 68 |
![]() | First sentence should end with a period. | 70 |
![]() | Parameter conf should be final. | 79 |
![]() | 'conf' hides a field. | 79 |
![]() | Parameter service should be final. | 80 |
![]() | 'service' hides a field. | 80 |
![]() | Method 'getPort' is not designed for extension - needs to be abstract, final or empty. | 109 |
![]() | Method 'prepareSuperstep' is not designed for extension - needs to be abstract, final or empty. | 114 |
![]() | '+' should be on a new line. | 127 |
![]() | '+' should be on a new line. | 138 |
![]() | '+' should be on a new line. | 165 |
![]() | '+' should be on a new line. | 166 |
![]() | '+' should be on a new line. | 167 |
![]() | '+' should be on a new line. | 168 |
![]() | '+' should be on a new line. | 169 |
![]() | '+' should be on a new line. | 177 |
![]() | '+' should be on a new line. | 178 |
![]() | '+' should be on a new line. | 189 |
![]() | '+' should be on a new line. | 190 |
![]() | Method 'getServerData' is not designed for extension - needs to be abstract, final or empty. | 195 |
![]() | Method 'close' is not designed for extension - needs to be abstract, final or empty. | 200 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 25 |
![]() | First sentence should end with a period. | 30 |
![]() | Method 'getNextRequestId' is not designed for extension - needs to be abstract, final or empty. | 40 |
![]() | Parameter address should be final. | 40 |
![]() | '+' should be on a new line. | 45 |
![]() | First sentence should end with a period. | 25 |
![]() | First sentence should end with a period. | 30 |
![]() | Method 'getNextRequestId' is not designed for extension - needs to be abstract, final or empty. | 40 |
![]() | Parameter address should be final. | 40 |
![]() | '+' should be on a new line. | 45 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 29 |
![]() | Parameter destinationWorkerId should be final. | 38 |
![]() | 'destinationWorkerId' hides a field. | 38 |
![]() | Parameter requestId should be final. | 38 |
![]() | 'requestId' hides a field. | 38 |
![]() | Method 'getDestinationWorkerId' is not designed for extension - needs to be abstract, final or empty. | 43 |
![]() | Missing a Javadoc comment. | 43 |
![]() | Method 'getRequestId' is not designed for extension - needs to be abstract, final or empty. | 47 |
![]() | Missing a Javadoc comment. | 47 |
![]() | Method 'hashCode' is not designed for extension - needs to be abstract, final or empty. | 51 |
![]() | '29' is a magic number. | 53 |
![]() | '57' is a magic number. | 53 |
![]() | Method 'equals' is not designed for extension - needs to be abstract, final or empty. | 56 |
![]() | Parameter other should be final. | 57 |
![]() | '&&' should be on a new line. | 60 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 69 |
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 29 |
![]() | Parameter destinationWorkerId should be final. | 38 |
![]() | 'destinationWorkerId' hides a field. | 38 |
![]() | Parameter requestId should be final. | 38 |
![]() | 'requestId' hides a field. | 38 |
![]() | Method 'getDestinationWorkerId' is not designed for extension - needs to be abstract, final or empty. | 43 |
![]() | Missing a Javadoc comment. | 43 |
![]() | Method 'getRequestId' is not designed for extension - needs to be abstract, final or empty. | 47 |
![]() | Missing a Javadoc comment. | 47 |
![]() | Method 'hashCode' is not designed for extension - needs to be abstract, final or empty. | 51 |
![]() | '29' is a magic number. | 53 |
![]() | '57' is a magic number. | 53 |
![]() | Method 'equals' is not designed for extension - needs to be abstract, final or empty. | 56 |
![]() | Parameter other should be final. | 57 |
![]() | '&&' should be on a new line. | 60 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 69 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 24 |
![]() | First sentence should end with a period. | 27 |
![]() | Parameter workerRequestReservedMap should be final. | 34 |
![]() | Parameter conf should be final. | 34 |
![]() | Method 'processRequest' is not designed for extension - needs to be abstract, final or empty. | 38 |
![]() | Parameter request should be final. | 39 |
![]() | First sentence should end with a period. | 43 |
![]() | Method 'newHandler' is not designed for extension - needs to be abstract, final or empty. | 47 |
![]() | Parameter workerRequestReservedMap should be final. | 49 |
![]() | Parameter conf should be final. | 50 |
![]() | First sentence should end with a period. | 24 |
![]() | First sentence should end with a period. | 27 |
![]() | Parameter workerRequestReservedMap should be final. | 34 |
![]() | Parameter conf should be final. | 34 |
![]() | Method 'processRequest' is not designed for extension - needs to be abstract, final or empty. | 38 |
![]() | Parameter request should be final. | 39 |
![]() | First sentence should end with a period. | 43 |
![]() | Method 'newHandler' is not designed for extension - needs to be abstract, final or empty. | 47 |
![]() | Parameter workerRequestReservedMap should be final. | 49 |
![]() | Parameter conf should be final. | 50 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 37 |
![]() | First sentence should end with a period. | 40 |
![]() | First sentence should end with a period. | 42 |
![]() | Parameter conf should be final. | 51 |
![]() | 'conf' hides a field. | 51 |
![]() | Parameter byteCounter should be final. | 51 |
![]() | 'byteCounter' hides a field. | 51 |
![]() | Method 'decode' is not designed for extension - needs to be abstract, final or empty. | 56 |
![]() | Parameter ctx should be final. | 57 |
![]() | Parameter channel should be final. | 58 |
![]() | Parameter msg should be final. | 58 |
![]() | '30000' is a magic number. | 64 |
![]() | First sentence should end with a period. | 37 |
![]() | First sentence should end with a period. | 40 |
![]() | First sentence should end with a period. | 42 |
![]() | Parameter conf should be final. | 51 |
![]() | 'conf' hides a field. | 51 |
![]() | Parameter byteCounter should be final. | 51 |
![]() | 'byteCounter' hides a field. | 51 |
![]() | Method 'decode' is not designed for extension - needs to be abstract, final or empty. | 56 |
![]() | Parameter ctx should be final. | 57 |
![]() | Parameter channel should be final. | 58 |
![]() | Parameter msg should be final. | 58 |
![]() | '30000' is a magic number. | 64 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 34 |
![]() | First sentence should end with a period. | 36 |
![]() | '4' is a magic number. | 37 |
![]() | Method 'encode' is not designed for extension - needs to be abstract, final or empty. | 39 |
![]() | Parameter ctx should be final. | 40 |
![]() | Parameter channel should be final. | 41 |
![]() | Parameter msg should be final. | 41 |
![]() | '10' is a magic number. | 50 |
![]() | '4' is a magic number. | 63 |
![]() | First sentence should end with a period. | 34 |
![]() | First sentence should end with a period. | 36 |
![]() | '4' is a magic number. | 37 |
![]() | Method 'encode' is not designed for extension - needs to be abstract, final or empty. | 39 |
![]() | Parameter ctx should be final. | 40 |
![]() | Parameter channel should be final. | 41 |
![]() | Parameter msg should be final. | 41 |
![]() | '10' is a magic number. | 50 |
![]() | '4' is a magic number. | 63 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 31 |
![]() | First sentence should end with a period. | 33 |
![]() | First sentence should end with a period. | 35 |
![]() | First sentence should end with a period. | 37 |
![]() | Parameter destinationAddress should be final. | 46 |
![]() | 'destinationAddress' hides a field. | 46 |
![]() | Parameter request should be final. | 47 |
![]() | 'request' hides a field. | 47 |
![]() | Method 'getDestinationAddress' is not designed for extension - needs to be abstract, final or empty. | 53 |
![]() | Missing a Javadoc comment. | 53 |
![]() | Method 'getStartedMsecs' is not designed for extension - needs to be abstract, final or empty. | 57 |
![]() | Missing a Javadoc comment. | 57 |
![]() | Method 'getElapsedMsecs' is not designed for extension - needs to be abstract, final or empty. | 66 |
![]() | Method 'getRequest' is not designed for extension - needs to be abstract, final or empty. | 70 |
![]() | Missing a Javadoc comment. | 70 |
![]() | Method 'setWriteFuture' is not designed for extension - needs to be abstract, final or empty. | 74 |
![]() | Missing a Javadoc comment. | 74 |
![]() | Parameter writeFuture should be final. | 74 |
![]() | 'writeFuture' hides a field. | 74 |
![]() | Method 'getWriteFuture' is not designed for extension - needs to be abstract, final or empty. | 78 |
![]() | Missing a Javadoc comment. | 78 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 82 |
![]() | '+' should be on a new line. | 84 |
![]() | '+' should be on a new line. | 85 |
![]() | '+' should be on a new line. | 86 |
![]() | Avoid inline conditionals. | 87 |
![]() | ':' should be on a new line. | 87 |
![]() | '+' should be on a new line. | 88 |
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 31 |
![]() | First sentence should end with a period. | 33 |
![]() | First sentence should end with a period. | 35 |
![]() | First sentence should end with a period. | 37 |
![]() | Parameter destinationAddress should be final. | 46 |
![]() | 'destinationAddress' hides a field. | 46 |
![]() | Parameter request should be final. | 47 |
![]() | 'request' hides a field. | 47 |
![]() | Method 'getDestinationAddress' is not designed for extension - needs to be abstract, final or empty. | 53 |
![]() | Missing a Javadoc comment. | 53 |
![]() | Method 'getStartedMsecs' is not designed for extension - needs to be abstract, final or empty. | 57 |
![]() | Missing a Javadoc comment. | 57 |
![]() | Method 'getElapsedMsecs' is not designed for extension - needs to be abstract, final or empty. | 66 |
![]() | Method 'getRequest' is not designed for extension - needs to be abstract, final or empty. | 70 |
![]() | Missing a Javadoc comment. | 70 |
![]() | Method 'setWriteFuture' is not designed for extension - needs to be abstract, final or empty. | 74 |
![]() | Missing a Javadoc comment. | 74 |
![]() | Parameter writeFuture should be final. | 74 |
![]() | 'writeFuture' hides a field. | 74 |
![]() | Method 'getWriteFuture' is not designed for extension - needs to be abstract, final or empty. | 78 |
![]() | Missing a Javadoc comment. | 78 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 82 |
![]() | '+' should be on a new line. | 84 |
![]() | '+' should be on a new line. | 85 |
![]() | '+' should be on a new line. | 86 |
![]() | Avoid inline conditionals. | 87 |
![]() | ':' should be on a new line. | 87 |
![]() | '+' should be on a new line. | 88 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 40 |
![]() | First sentence should end with a period. | 42 |
![]() | Name 'ALREADY_CLOSED_FIRST_REQUEST' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 46 |
![]() | First sentence should end with a period. | 47 |
![]() | First sentence should end with a period. | 49 |
![]() | First sentence should end with a period. | 51 |
![]() | First sentence should end with a period. | 54 |
![]() | Parameter workerRequestReservedMap should be final. | 61 |
![]() | 'workerRequestReservedMap' hides a field. | 61 |
![]() | Parameter conf should be final. | 62 |
![]() | Method 'messageReceived' is not designed for extension - needs to be abstract, final or empty. | 70 |
![]() | Parameter ctx should be final. | 72 |
![]() | Parameter e should be final. | 72 |
![]() | '+' should be on a new line. | 81 |
![]() | '+' should be on a new line. | 82 |
![]() | '+' should be on a new line. | 97 |
![]() | '+' should be on a new line. | 98 |
![]() | '+' should be on a new line. | 99 |
![]() | '+' should be on a new line. | 100 |
![]() | First sentence should end with a period. | 112 |
![]() | Method 'channelConnected' is not designed for extension - needs to be abstract, final or empty. | 119 |
![]() | Parameter ctx should be final. | 120 |
![]() | Parameter e should be final. | 121 |
![]() | '+' should be on a new line. | 123 |
![]() | Method 'channelClosed' is not designed for extension - needs to be abstract, final or empty. | 128 |
![]() | Parameter ctx should be final. | 129 |
![]() | Parameter e should be final. | 130 |
![]() | '+' should be on a new line. | 132 |
![]() | '+' should be on a new line. | 133 |
![]() | Method 'exceptionCaught' is not designed for extension - needs to be abstract, final or empty. | 138 |
![]() | Parameter ctx should be final. | 139 |
![]() | Parameter e should be final. | 139 |
![]() | '+' should be on a new line. | 140 |
![]() | First sentence should end with a period. | 144 |
![]() | First sentence should end with a period. | 148 |
![]() | First sentence should end with a period. | 40 |
![]() | First sentence should end with a period. | 42 |
![]() | Name 'ALREADY_CLOSED_FIRST_REQUEST' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 46 |
![]() | First sentence should end with a period. | 47 |
![]() | First sentence should end with a period. | 49 |
![]() | First sentence should end with a period. | 51 |
![]() | First sentence should end with a period. | 54 |
![]() | Parameter workerRequestReservedMap should be final. | 61 |
![]() | 'workerRequestReservedMap' hides a field. | 61 |
![]() | Parameter conf should be final. | 62 |
![]() | Method 'messageReceived' is not designed for extension - needs to be abstract, final or empty. | 70 |
![]() | Parameter ctx should be final. | 72 |
![]() | Parameter e should be final. | 72 |
![]() | '+' should be on a new line. | 81 |
![]() | '+' should be on a new line. | 82 |
![]() | '+' should be on a new line. | 97 |
![]() | '+' should be on a new line. | 98 |
![]() | '+' should be on a new line. | 99 |
![]() | '+' should be on a new line. | 100 |
![]() | First sentence should end with a period. | 112 |
![]() | Method 'channelConnected' is not designed for extension - needs to be abstract, final or empty. | 119 |
![]() | Parameter ctx should be final. | 120 |
![]() | Parameter e should be final. | 121 |
![]() | '+' should be on a new line. | 123 |
![]() | Method 'channelClosed' is not designed for extension - needs to be abstract, final or empty. | 128 |
![]() | Parameter ctx should be final. | 129 |
![]() | Parameter e should be final. | 130 |
![]() | '+' should be on a new line. | 132 |
![]() | '+' should be on a new line. | 133 |
![]() | Method 'exceptionCaught' is not designed for extension - needs to be abstract, final or empty. | 138 |
![]() | Parameter ctx should be final. | 139 |
![]() | Parameter e should be final. | 139 |
![]() | '+' should be on a new line. | 140 |
![]() | First sentence should end with a period. | 144 |
![]() | First sentence should end with a period. | 148 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 39 |
![]() | Name 'ALREADY_DROPPED_FIRST_RESPONSE' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 43 |
![]() | First sentence should end with a period. | 44 |
![]() | First sentence should end with a period. | 46 |
![]() | Parameter workerIdOutstandingRequestMap should be final. | 58 |
![]() | 'workerIdOutstandingRequestMap' hides a field. | 59 |
![]() | Parameter conf should be final. | 60 |
![]() | Method 'messageReceived' is not designed for extension - needs to be abstract, final or empty. | 67 |
![]() | Parameter ctx should be final. | 69 |
![]() | Parameter event should be final. | 69 |
![]() | '+' should be on a new line. | 71 |
![]() | '+' should be on a new line. | 92 |
![]() | '+' should be on a new line. | 111 |
![]() | '+' should be on a new line. | 115 |
![]() | '+' should be on a new line. | 116 |
![]() | '+' should be on a new line. | 117 |
![]() | Method 'channelClosed' is not designed for extension - needs to be abstract, final or empty. | 128 |
![]() | Parameter ctx should be final. | 129 |
![]() | Parameter e should be final. | 130 |
![]() | '+' should be on a new line. | 132 |
![]() | Method 'exceptionCaught' is not designed for extension - needs to be abstract, final or empty. | 137 |
![]() | Parameter ctx should be final. | 138 |
![]() | Parameter e should be final. | 138 |
![]() | '+' should be on a new line. | 139 |
![]() | First sentence should end with a period. | 39 |
![]() | Name 'ALREADY_DROPPED_FIRST_RESPONSE' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 43 |
![]() | First sentence should end with a period. | 44 |
![]() | First sentence should end with a period. | 46 |
![]() | Parameter workerIdOutstandingRequestMap should be final. | 58 |
![]() | 'workerIdOutstandingRequestMap' hides a field. | 59 |
![]() | Parameter conf should be final. | 60 |
![]() | Method 'messageReceived' is not designed for extension - needs to be abstract, final or empty. | 67 |
![]() | Parameter ctx should be final. | 69 |
![]() | Parameter event should be final. | 69 |
![]() | '+' should be on a new line. | 71 |
![]() | '+' should be on a new line. | 92 |
![]() | '+' should be on a new line. | 111 |
![]() | '+' should be on a new line. | 115 |
![]() | '+' should be on a new line. | 116 |
![]() | '+' should be on a new line. | 117 |
![]() | Method 'channelClosed' is not designed for extension - needs to be abstract, final or empty. | 128 |
![]() | Parameter ctx should be final. | 129 |
![]() | Parameter e should be final. | 130 |
![]() | '+' should be on a new line. | 132 |
![]() | Method 'exceptionCaught' is not designed for extension - needs to be abstract, final or empty. | 137 |
![]() | Parameter ctx should be final. | 138 |
![]() | Parameter e should be final. | 138 |
![]() | '+' should be on a new line. | 139 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 29 |
![]() | First sentence should end with a period. | 33 |
![]() | First sentence should end with a period. | 37 |
![]() | Parameter conf should be final. | 42 |
![]() | Method 'reserveRequest' is not designed for extension - needs to be abstract, final or empty. | 56 |
![]() | Parameter workerId should be final. | 56 |
![]() | Parameter requestId should be final. | 56 |
![]() | Parameter workerId should be final. | 67 |
![]() | First sentence should end with a period. | 29 |
![]() | First sentence should end with a period. | 33 |
![]() | First sentence should end with a period. | 37 |
![]() | Parameter conf should be final. | 42 |
![]() | Method 'reserveRequest' is not designed for extension - needs to be abstract, final or empty. | 56 |
![]() | Parameter workerId should be final. | 56 |
![]() | Parameter requestId should be final. | 56 |
![]() | Parameter workerId should be final. | 67 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 41 |
![]() | Parameter serverData should be final. | 48 |
![]() | 'serverData' hides a field. | 48 |
![]() | Parameter workerRequestReservedMap should be final. | 49 |
![]() | Parameter conf should be final. | 50 |
![]() | Method 'processRequest' is not designed for extension - needs to be abstract, final or empty. | 55 |
![]() | Parameter request should be final. | 56 |
![]() | First sentence should end with a period. | 60 |
![]() | First sentence should end with a period. | 64 |
![]() | First sentence should end with a period. | 67 |
![]() | Parameter serverData should be final. | 72 |
![]() | 'serverData' hides a field. | 72 |
![]() | Method 'newHandler' is not designed for extension - needs to be abstract, final or empty. | 76 |
![]() | Parameter workerRequestReservedMap should be final. | 78 |
![]() | Parameter conf should be final. | 79 |
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 41 |
![]() | Parameter serverData should be final. | 48 |
![]() | 'serverData' hides a field. | 48 |
![]() | Parameter workerRequestReservedMap should be final. | 49 |
![]() | Parameter conf should be final. | 50 |
![]() | Method 'processRequest' is not designed for extension - needs to be abstract, final or empty. | 55 |
![]() | Parameter request should be final. | 56 |
![]() | First sentence should end with a period. | 60 |
![]() | First sentence should end with a period. | 64 |
![]() | First sentence should end with a period. | 67 |
![]() | Parameter serverData should be final. | 72 |
![]() | 'serverData' hides a field. | 72 |
![]() | Method 'newHandler' is not designed for extension - needs to be abstract, final or empty. | 76 |
![]() | Parameter workerRequestReservedMap should be final. | 78 |
![]() | Parameter conf should be final. | 79 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 21 |
![]() | First sentence should end with a period. | 25 |
![]() | First sentence should end with a period. | 21 |
![]() | First sentence should end with a period. | 25 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 21 |
![]() | First sentence should end with a period. | 25 |
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 29 |
![]() | First sentence should end with a period. | 35 |
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 41 |
![]() | Parameter requestClass should be final. | 46 |
![]() | 'requestClass' hides a field. | 46 |
![]() | First sentence should end with a period. | 50 |
![]() | First sentence should end with a period. | 21 |
![]() | First sentence should end with a period. | 25 |
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 29 |
![]() | First sentence should end with a period. | 35 |
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 41 |
![]() | Parameter requestClass should be final. | 46 |
![]() | 'requestClass' hides a field. | 46 |
![]() | First sentence should end with a period. | 50 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 41 |
![]() | Parameter partitionId should be final. | 50 |
![]() | Parameter vertexIdMessages should be final. | 51 |
![]() | Method 'getType' is not designed for extension - needs to be abstract, final or empty. | 55 |
![]() | Method 'doRequest' is not designed for extension - needs to be abstract, final or empty. | 60 |
![]() | Parameter serverData should be final. | 61 |
![]() | First sentence should end with a period. | 41 |
![]() | Parameter partitionId should be final. | 50 |
![]() | Parameter vertexIdMessages should be final. | 51 |
![]() | Method 'getType' is not designed for extension - needs to be abstract, final or empty. | 55 |
![]() | Method 'doRequest' is not designed for extension - needs to be abstract, final or empty. | 60 |
![]() | Parameter serverData should be final. | 61 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 50 |
![]() | First sentence should end with a period. | 53 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 58 |
![]() | Parameter partitionId should be final. | 69 |
![]() | 'partitionId' hides a field. | 69 |
![]() | Parameter vertexIdMessages should be final. | 70 |
![]() | 'vertexIdMessages' hides a field. | 70 |
![]() | Method 'readFieldsRequest' is not designed for extension - needs to be abstract, final or empty. | 75 |
![]() | Parameter input should be final. | 76 |
![]() | Method 'writeRequest' is not designed for extension - needs to be abstract, final or empty. | 97 |
![]() | Parameter output should be final. | 98 |
![]() | Method 'getType' is not designed for extension - needs to be abstract, final or empty. | 110 |
![]() | Method 'doRequest' is not designed for extension - needs to be abstract, final or empty. | 115 |
![]() | Parameter serverData should be final. | 116 |
![]() | First sentence should end with a period. | 125 |
![]() | Method 'getPartitionId' is not designed for extension - needs to be abstract, final or empty. | 130 |
![]() | First sentence should end with a period. | 134 |
![]() | Method 'getVertexIdMessages' is not designed for extension - needs to be abstract, final or empty. | 139 |
![]() | First sentence should end with a period. | 50 |
![]() | First sentence should end with a period. | 53 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 58 |
![]() | Parameter partitionId should be final. | 69 |
![]() | 'partitionId' hides a field. | 69 |
![]() | Parameter vertexIdMessages should be final. | 70 |
![]() | 'vertexIdMessages' hides a field. | 70 |
![]() | Method 'readFieldsRequest' is not designed for extension - needs to be abstract, final or empty. | 75 |
![]() | Parameter input should be final. | 76 |
![]() | Method 'writeRequest' is not designed for extension - needs to be abstract, final or empty. | 97 |
![]() | Parameter output should be final. | 98 |
![]() | Method 'getType' is not designed for extension - needs to be abstract, final or empty. | 110 |
![]() | Method 'doRequest' is not designed for extension - needs to be abstract, final or empty. | 115 |
![]() | Parameter serverData should be final. | 116 |
![]() | First sentence should end with a period. | 125 |
![]() | Method 'getPartitionId' is not designed for extension - needs to be abstract, final or empty. | 130 |
![]() | First sentence should end with a period. | 134 |
![]() | Method 'getVertexIdMessages' is not designed for extension - needs to be abstract, final or empty. | 139 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 49 |
![]() | First sentence should end with a period. | 52 |
![]() | First sentence should end with a period. | 54 |
![]() | First sentence should end with a period. | 57 |
![]() | Parameter partitionId should be final. | 69 |
![]() | 'partitionId' hides a field. | 69 |
![]() | Parameter vertexIdMutations should be final. | 70 |
![]() | 'vertexIdMutations' hides a field. | 70 |
![]() | Method 'readFieldsRequest' is not designed for extension - needs to be abstract, final or empty. | 75 |
![]() | Parameter input should be final. | 76 |
![]() | Method 'writeRequest' is not designed for extension - needs to be abstract, final or empty. | 94 |
![]() | Parameter output should be final. | 95 |
![]() | ':' should be on a new line. | 98 |
![]() | Method 'getType' is not designed for extension - needs to be abstract, final or empty. | 105 |
![]() | Method 'doRequest' is not designed for extension - needs to be abstract, final or empty. | 110 |
![]() | Parameter serverData should be final. | 111 |
![]() | ':' should be on a new line. | 114 |
![]() | First sentence should end with a period. | 49 |
![]() | First sentence should end with a period. | 52 |
![]() | First sentence should end with a period. | 54 |
![]() | First sentence should end with a period. | 57 |
![]() | Parameter partitionId should be final. | 69 |
![]() | 'partitionId' hides a field. | 69 |
![]() | Parameter vertexIdMutations should be final. | 70 |
![]() | 'vertexIdMutations' hides a field. | 70 |
![]() | Method 'readFieldsRequest' is not designed for extension - needs to be abstract, final or empty. | 75 |
![]() | Parameter input should be final. | 76 |
![]() | Method 'writeRequest' is not designed for extension - needs to be abstract, final or empty. | 94 |
![]() | Parameter output should be final. | 95 |
![]() | ':' should be on a new line. | 98 |
![]() | Method 'getType' is not designed for extension - needs to be abstract, final or empty. | 105 |
![]() | Method 'doRequest' is not designed for extension - needs to be abstract, final or empty. | 110 |
![]() | Parameter serverData should be final. | 111 |
![]() | ':' should be on a new line. | 114 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 47 |
![]() | First sentence should end with a period. | 50 |
![]() | First sentence should end with a period. | 52 |
![]() | First sentence should end with a period. | 55 |
![]() | Parameter partitionId should be final. | 66 |
![]() | 'partitionId' hides a field. | 66 |
![]() | Parameter vertices should be final. | 67 |
![]() | 'vertices' hides a field. | 67 |
![]() | Method 'readFieldsRequest' is not designed for extension - needs to be abstract, final or empty. | 72 |
![]() | Parameter input should be final. | 73 |
![]() | Method 'writeRequest' is not designed for extension - needs to be abstract, final or empty. | 84 |
![]() | Parameter output should be final. | 85 |
![]() | Method 'getType' is not designed for extension - needs to be abstract, final or empty. | 93 |
![]() | Method 'doRequest' is not designed for extension - needs to be abstract, final or empty. | 98 |
![]() | Parameter serverData should be final. | 99 |
![]() | First sentence should end with a period. | 47 |
![]() | First sentence should end with a period. | 50 |
![]() | First sentence should end with a period. | 52 |
![]() | First sentence should end with a period. | 55 |
![]() | Parameter partitionId should be final. | 66 |
![]() | 'partitionId' hides a field. | 66 |
![]() | Parameter vertices should be final. | 67 |
![]() | 'vertices' hides a field. | 67 |
![]() | Method 'readFieldsRequest' is not designed for extension - needs to be abstract, final or empty. | 72 |
![]() | Parameter input should be final. | 73 |
![]() | Method 'writeRequest' is not designed for extension - needs to be abstract, final or empty. | 84 |
![]() | Parameter output should be final. | 85 |
![]() | Method 'getType' is not designed for extension - needs to be abstract, final or empty. | 93 |
![]() | Method 'doRequest' is not designed for extension - needs to be abstract, final or empty. | 98 |
![]() | Parameter serverData should be final. | 99 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 25 |
![]() | First sentence should end with a period. | 35 |
![]() | First sentence should end with a period. | 25 |
![]() | First sentence should end with a period. | 35 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 28 |
![]() | First sentence should end with a period. | 32 |
![]() | First sentence should end with a period. | 34 |
![]() | First sentence should end with a period. | 36 |
![]() | Method 'getClientId' is not designed for extension - needs to be abstract, final or empty. | 39 |
![]() | Missing a Javadoc comment. | 39 |
![]() | Method 'setClientId' is not designed for extension - needs to be abstract, final or empty. | 43 |
![]() | Missing a Javadoc comment. | 43 |
![]() | Parameter clientId should be final. | 43 |
![]() | 'clientId' hides a field. | 43 |
![]() | Method 'getRequestId' is not designed for extension - needs to be abstract, final or empty. | 47 |
![]() | Missing a Javadoc comment. | 47 |
![]() | Method 'setRequestId' is not designed for extension - needs to be abstract, final or empty. | 51 |
![]() | Missing a Javadoc comment. | 51 |
![]() | Parameter requestId should be final. | 51 |
![]() | 'requestId' hides a field. | 51 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 62 |
![]() | Expected @throws tag for 'IOException'. | 67 |
![]() | First sentence should end with a period. | 69 |
![]() | Expected @throws tag for 'IOException'. | 74 |
![]() | Parameter conf should be final. | 82 |
![]() | 'conf' hides a field. | 82 |
![]() | Parameter input should be final. | 87 |
![]() | Parameter output should be final. | 94 |
![]() | First sentence should end with a period. | 28 |
![]() | First sentence should end with a period. | 32 |
![]() | First sentence should end with a period. | 34 |
![]() | First sentence should end with a period. | 36 |
![]() | Method 'getClientId' is not designed for extension - needs to be abstract, final or empty. | 39 |
![]() | Missing a Javadoc comment. | 39 |
![]() | Method 'setClientId' is not designed for extension - needs to be abstract, final or empty. | 43 |
![]() | Missing a Javadoc comment. | 43 |
![]() | Parameter clientId should be final. | 43 |
![]() | 'clientId' hides a field. | 43 |
![]() | Method 'getRequestId' is not designed for extension - needs to be abstract, final or empty. | 47 |
![]() | Missing a Javadoc comment. | 47 |
![]() | Method 'setRequestId' is not designed for extension - needs to be abstract, final or empty. | 51 |
![]() | Missing a Javadoc comment. | 51 |
![]() | Parameter requestId should be final. | 51 |
![]() | 'requestId' hides a field. | 51 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 62 |
![]() | Expected @throws tag for 'IOException'. | 67 |
![]() | First sentence should end with a period. | 69 |
![]() | Expected @throws tag for 'IOException'. | 74 |
![]() | Parameter conf should be final. | 82 |
![]() | 'conf' hides a field. | 82 |
![]() | Parameter input should be final. | 87 |
![]() | Parameter output should be final. | 94 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 35 |
![]() | First sentence should end with a period. | 37 |
![]() | First sentence should end with a period. | 39 |
![]() | First sentence should end with a period. | 41 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 44 |
![]() | Parameter messages should be final. | 45 |
![]() | '10' is a magic number. | 65 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 73 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 93 |
![]() | Parameter expected should be final. | 109 |
![]() | Parameter actual should be final. | 109 |
![]() | '+' should be on a new line. | 111 |
![]() | First sentence should end with a period. | 35 |
![]() | First sentence should end with a period. | 37 |
![]() | First sentence should end with a period. | 39 |
![]() | First sentence should end with a period. | 41 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 44 |
![]() | Parameter messages should be final. | 45 |
![]() | '10' is a magic number. | 65 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 73 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 93 |
![]() | Parameter expected should be final. | 109 |
![]() | Parameter actual should be final. | 109 |
![]() | '+' should be on a new line. | 111 |
Violation | Message | Line |
---|---|---|
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 54 |
![]() | Parameter messages should be final. | 55 |
![]() | Expected @throws tag for 'IOException'. | 55 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 54 |
![]() | Parameter messages should be final. | 55 |
![]() | Expected @throws tag for 'IOException'. | 55 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 31 |
![]() | First sentence should end with a period. | 43 |
![]() | First sentence should end with a period. | 46 |
![]() | First sentence should end with a period. | 51 |
![]() | First sentence should end with a period. | 53 |
![]() | Variable 'recordsRead' must be private and have accessor methods. | 54 |
![]() | First sentence should end with a period. | 55 |
![]() | Variable 'totalRecords' must be private and have accessor methods. | 56 |
![]() | Variable 'inputSplit' must be private and have accessor methods. | 58 |
![]() | Variable 'reverseIdOrder' must be private and have accessor methods. | 60 |
![]() | First sentence should end with a period. | 61 |
![]() | Variable 'configuration' must be private and have accessor methods. | 62 |
![]() | Parameter inputSplit should be final. | 71 |
![]() | 'inputSplit' hides a field. | 71 |
![]() | Parameter context should be final. | 72 |
![]() | '100.0f' is a magic number. | 89 |
![]() | First sentence should end with a period. | 31 |
![]() | First sentence should end with a period. | 43 |
![]() | First sentence should end with a period. | 46 |
![]() | First sentence should end with a period. | 51 |
![]() | First sentence should end with a period. | 53 |
![]() | Variable 'recordsRead' must be private and have accessor methods. | 54 |
![]() | First sentence should end with a period. | 55 |
![]() | Variable 'totalRecords' must be private and have accessor methods. | 56 |
![]() | Variable 'inputSplit' must be private and have accessor methods. | 58 |
![]() | Variable 'reverseIdOrder' must be private and have accessor methods. | 60 |
![]() | First sentence should end with a period. | 61 |
![]() | Variable 'configuration' must be private and have accessor methods. | 62 |
![]() | Parameter inputSplit should be final. | 71 |
![]() | 'inputSplit' hides a field. | 71 |
![]() | Parameter context should be final. | 72 |
![]() | '100.0f' is a magic number. | 89 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 25 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 41 |
![]() | Parameter messages should be final. | 42 |
![]() | First sentence should end with a period. | 25 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 41 |
![]() | Parameter messages should be final. | 42 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 29 |
![]() | Method 'combine' is not designed for extension - needs to be abstract, final or empty. | 34 |
![]() | Parameter target should be final. | 36 |
![]() | Parameter messages should be final. | 37 |
![]() | First sentence should end with a period. | 29 |
![]() | Method 'combine' is not designed for extension - needs to be abstract, final or empty. | 34 |
![]() | Parameter target should be final. | 36 |
![]() | Parameter messages should be final. | 37 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 28 |
![]() | Method 'combine' is not designed for extension - needs to be abstract, final or empty. | 33 |
![]() | Parameter target should be final. | 34 |
![]() | Parameter messages should be final. | 35 |
![]() | First sentence should end with a period. | 28 |
![]() | Method 'combine' is not designed for extension - needs to be abstract, final or empty. | 33 |
![]() | Parameter target should be final. | 34 |
![]() | Parameter messages should be final. | 35 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 38 |
![]() | Name 'FILENAME' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 39 |
![]() | First sentence should end with a period. | 40 |
![]() | Missing a Javadoc comment. | 43 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 47 |
![]() | Parameter context should be final. | 49 |
![]() | Parameter applicationAttempt should be final. | 49 |
![]() | Method 'writeAggregator' is not designed for extension - needs to be abstract, final or empty. | 57 |
![]() | Parameter aggregatorMap should be final. | 59 |
![]() | Parameter superstep should be final. | 60 |
![]() | Method 'close' is not designed for extension - needs to be abstract, final or empty. | 67 |
![]() | First sentence should end with a period. | 38 |
![]() | Name 'FILENAME' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 39 |
![]() | First sentence should end with a period. | 40 |
![]() | Missing a Javadoc comment. | 43 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 47 |
![]() | Parameter context should be final. | 49 |
![]() | Parameter applicationAttempt should be final. | 49 |
![]() | Method 'writeAggregator' is not designed for extension - needs to be abstract, final or empty. | 57 |
![]() | Parameter aggregatorMap should be final. | 59 |
![]() | Parameter superstep should be final. | 60 |
![]() | Method 'close' is not designed for extension - needs to be abstract, final or empty. | 67 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 52 |
![]() | First sentence should end with a period. | 54 |
![]() | First sentence should end with a period. | 56 |
![]() | First sentence should end with a period. | 62 |
![]() | First sentence should end with a period. | 65 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 68 |
![]() | Parameter messages should be final. | 69 |
![]() | '&&' should be on a new line. | 76 |
![]() | '&&' should be on a new line. | 77 |
![]() | '+' should be on a new line. | 79 |
![]() | '+' should be on a new line. | 80 |
![]() | '+' should be on a new line. | 81 |
![]() | '+' should be on a new line. | 94 |
![]() | '+' should be on a new line. | 100 |
![]() | '+' should be on a new line. | 101 |
![]() | '+' should be on a new line. | 106 |
![]() | '+' should be on a new line. | 107 |
![]() | '+' should be on a new line. | 110 |
![]() | '+' should be on a new line. | 112 |
![]() | '+' should be on a new line. | 113 |
![]() | '+' should be on a new line. | 114 |
![]() | '+' should be on a new line. | 115 |
![]() | '+' should be on a new line. | 116 |
![]() | First sentence should end with a period. | 128 |
![]() | First sentence should end with a period. | 130 |
![]() | Name 'FINAL_SUM' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 131 |
![]() | First sentence should end with a period. | 132 |
![]() | '6' is a magic number. | 133 |
![]() | Missing a Javadoc comment. | 137 |
![]() | Method 'preApplication' is not designed for extension - needs to be abstract, final or empty. | 141 |
![]() | Method 'postApplication' is not designed for extension - needs to be abstract, final or empty. | 150 |
![]() | Method 'getSupersteps' is not designed for extension - needs to be abstract, final or empty. | 164 |
![]() | Missing a Javadoc comment. | 164 |
![]() | Method 'getEnableFault' is not designed for extension - needs to be abstract, final or empty. | 168 |
![]() | Missing a Javadoc comment. | 168 |
![]() | Method 'run' is not designed for extension - needs to be abstract, final or empty. | 173 |
![]() | Parameter args should be final. | 174 |
![]() | '100.0f' is a magic number. | 222 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 247 |
![]() | Parameter args should be final. | 261 |
![]() | Expected @throws tag for 'Exception'. | 261 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 265 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 270 |
![]() | Parameter conf should be final. | 271 |
![]() | 'conf' hides a field. | 271 |
![]() | First sentence should end with a period. | 52 |
![]() | First sentence should end with a period. | 54 |
![]() | First sentence should end with a period. | 56 |
![]() | First sentence should end with a period. | 62 |
![]() | First sentence should end with a period. | 65 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 68 |
![]() | Parameter messages should be final. | 69 |
![]() | '&&' should be on a new line. | 76 |
![]() | '&&' should be on a new line. | 77 |
![]() | '+' should be on a new line. | 79 |
![]() | '+' should be on a new line. | 80 |
![]() | '+' should be on a new line. | 81 |
![]() | '+' should be on a new line. | 94 |
![]() | '+' should be on a new line. | 100 |
![]() | '+' should be on a new line. | 101 |
![]() | '+' should be on a new line. | 106 |
![]() | '+' should be on a new line. | 107 |
![]() | '+' should be on a new line. | 110 |
![]() | '+' should be on a new line. | 112 |
![]() | '+' should be on a new line. | 113 |
![]() | '+' should be on a new line. | 114 |
![]() | '+' should be on a new line. | 115 |
![]() | '+' should be on a new line. | 116 |
![]() | First sentence should end with a period. | 128 |
![]() | First sentence should end with a period. | 130 |
![]() | Name 'FINAL_SUM' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 131 |
![]() | First sentence should end with a period. | 132 |
![]() | '6' is a magic number. | 133 |
![]() | Missing a Javadoc comment. | 137 |
![]() | Method 'preApplication' is not designed for extension - needs to be abstract, final or empty. | 141 |
![]() | Method 'postApplication' is not designed for extension - needs to be abstract, final or empty. | 150 |
![]() | Method 'getSupersteps' is not designed for extension - needs to be abstract, final or empty. | 164 |
![]() | Missing a Javadoc comment. | 164 |
![]() | Method 'getEnableFault' is not designed for extension - needs to be abstract, final or empty. | 168 |
![]() | Missing a Javadoc comment. | 168 |
![]() | Method 'run' is not designed for extension - needs to be abstract, final or empty. | 173 |
![]() | Parameter args should be final. | 174 |
![]() | '100.0f' is a magic number. | 222 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 247 |
![]() | Parameter args should be final. | 261 |
![]() | Expected @throws tag for 'Exception'. | 261 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 265 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 270 |
![]() | Parameter conf should be final. | 271 |
![]() | 'conf' hides a field. | 271 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 32 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 33 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 35 |
![]() | Parameter messages should be final. | 36 |
![]() | '101' is a magic number. | 38 |
![]() | '102' is a magic number. | 39 |
![]() | '103' is a magic number. | 40 |
![]() | '+' should be on a new line. | 52 |
![]() | '306' is a magic number. | 55 |
![]() | '3' is a magic number. | 59 |
![]() | '+' should be on a new line. | 61 |
![]() | First sentence should end with a period. | 32 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 33 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 35 |
![]() | Parameter messages should be final. | 36 |
![]() | '101' is a magic number. | 38 |
![]() | '102' is a magic number. | 39 |
![]() | '103' is a magic number. | 40 |
![]() | '+' should be on a new line. | 52 |
![]() | '306' is a magic number. | 55 |
![]() | '3' is a magic number. | 59 |
![]() | '+' should be on a new line. | 61 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 32 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 33 |
![]() | Comment matches to-do format 'TODO:'. | 34 |
![]() | First sentence should end with a period. | 34 |
![]() | Name 'SUPERSTEP' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 35 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 37 |
![]() | Parameter messages should be final. | 38 |
![]() | '0.15f' is a magic number. | 45 |
![]() | '0.85f' is a magic number. | 45 |
![]() | '30' is a magic number. | 47 |
![]() | '20' is a magic number. | 48 |
![]() | '10L' is a magic number. | 49 |
![]() | '2000' is a magic number. | 51 |
![]() | '10' is a magic number. | 56 |
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 32 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 33 |
![]() | Comment matches to-do format 'TODO:'. | 34 |
![]() | First sentence should end with a period. | 34 |
![]() | Name 'SUPERSTEP' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 35 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 37 |
![]() | Parameter messages should be final. | 38 |
![]() | '0.15f' is a magic number. | 45 |
![]() | '0.85f' is a magic number. | 45 |
![]() | '30' is a magic number. | 47 |
![]() | '20' is a magic number. | 48 |
![]() | '10L' is a magic number. | 49 |
![]() | '2000' is a magic number. | 51 |
![]() | '10' is a magic number. | 56 |
Violation | Message | Line |
---|---|---|
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 36 |
![]() | Parameter messages should be final. | 37 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 36 |
![]() | Parameter messages should be final. | 37 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 24 |
![]() | First sentence should end with a period. | 24 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 33 |
![]() | First sentence should end with a period. | 35 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 39 |
![]() | Parameter messages should be final. | 40 |
![]() | Avoid inline conditionals. | 41 |
![]() | First sentence should end with a period. | 56 |
![]() | Name 'FINAL_SUM' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 57 |
![]() | Method 'setFinalSum' is not designed for extension - needs to be abstract, final or empty. | 76 |
![]() | Missing a Javadoc comment. | 76 |
![]() | Parameter sum should be final. | 76 |
![]() | Missing a Javadoc comment. | 80 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 90 |
![]() | '10' is a magic number. | 94 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 99 |
![]() | First sentence should end with a period. | 33 |
![]() | First sentence should end with a period. | 35 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 39 |
![]() | Parameter messages should be final. | 40 |
![]() | Avoid inline conditionals. | 41 |
![]() | First sentence should end with a period. | 56 |
![]() | Name 'FINAL_SUM' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 57 |
![]() | Method 'setFinalSum' is not designed for extension - needs to be abstract, final or empty. | 76 |
![]() | Missing a Javadoc comment. | 76 |
![]() | Parameter sum should be final. | 76 |
![]() | Missing a Javadoc comment. | 80 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 90 |
![]() | '10' is a magic number. | 94 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 99 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 32 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 33 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 34 |
![]() | Parameter messages should be final. | 35 |
![]() | '101' is a magic number. | 37 |
![]() | '102' is a magic number. | 38 |
![]() | '103' is a magic number. | 39 |
![]() | '+' should be on a new line. | 49 |
![]() | '306' is a magic number. | 52 |
![]() | '3' is a magic number. | 56 |
![]() | '+' should be on a new line. | 57 |
![]() | First sentence should end with a period. | 32 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 33 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 34 |
![]() | Parameter messages should be final. | 35 |
![]() | '101' is a magic number. | 37 |
![]() | '102' is a magic number. | 38 |
![]() | '103' is a magic number. | 39 |
![]() | '+' should be on a new line. | 49 |
![]() | '306' is a magic number. | 52 |
![]() | '3' is a magic number. | 56 |
![]() | '+' should be on a new line. | 57 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 37 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 38 |
![]() | First sentence should end with a period. | 40 |
![]() | '100' is a magic number. | 41 |
![]() | Parameter range should be final. | 51 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 55 |
![]() | Parameter messages should be final. | 56 |
![]() | '3' is a magic number. | 70 |
![]() | '+' should be on a new line. | 74 |
![]() | '+' should be on a new line. | 75 |
![]() | '+' should be on a new line. | 81 |
![]() | '+' should be on a new line. | 82 |
![]() | '3' is a magic number. | 87 |
![]() | '4' is a magic number. | 96 |
![]() | '5' is a magic number. | 98 |
![]() | '+' should be on a new line. | 102 |
![]() | '+' should be on a new line. | 103 |
![]() | '+' should be on a new line. | 109 |
![]() | '+' should be on a new line. | 110 |
![]() | '3' is a magic number. | 115 |
![]() | '6' is a magic number. | 118 |
![]() | '3' is a magic number. | 121 |
![]() | '7' is a magic number. | 124 |
![]() | '+' should be on a new line. | 128 |
![]() | '+' should be on a new line. | 129 |
![]() | '8' is a magic number. | 132 |
![]() | '+' should be on a new line. | 136 |
![]() | '+' should be on a new line. | 137 |
![]() | First sentence should end with a period. | 150 |
![]() | First sentence should end with a period. | 152 |
![]() | First sentence should end with a period. | 154 |
![]() | First sentence should end with a period. | 156 |
![]() | Method 'postSuperstep' is not designed for extension - needs to be abstract, final or empty. | 169 |
![]() | '+' should be on a new line. | 176 |
![]() | '+' should be on a new line. | 177 |
![]() | Method 'getVertexCount' is not designed for extension - needs to be abstract, final or empty. | 183 |
![]() | Missing a Javadoc comment. | 183 |
![]() | Method 'getEdgeCount' is not designed for extension - needs to be abstract, final or empty. | 187 |
![]() | Missing a Javadoc comment. | 187 |
![]() | Method 'getOrigEdgeCount' is not designed for extension - needs to be abstract, final or empty. | 191 |
![]() | Missing a Javadoc comment. | 191 |
![]() | Method 'increaseEdgesRemoved' is not designed for extension - needs to be abstract, final or empty. | 198 |
![]() | First sentence should end with a period. | 37 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 38 |
![]() | First sentence should end with a period. | 40 |
![]() | '100' is a magic number. | 41 |
![]() | Parameter range should be final. | 51 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 55 |
![]() | Parameter messages should be final. | 56 |
![]() | '3' is a magic number. | 70 |
![]() | '+' should be on a new line. | 74 |
![]() | '+' should be on a new line. | 75 |
![]() | '+' should be on a new line. | 81 |
![]() | '+' should be on a new line. | 82 |
![]() | '3' is a magic number. | 87 |
![]() | '4' is a magic number. | 96 |
![]() | '5' is a magic number. | 98 |
![]() | '+' should be on a new line. | 102 |
![]() | '+' should be on a new line. | 103 |
![]() | '+' should be on a new line. | 109 |
![]() | '+' should be on a new line. | 110 |
![]() | '3' is a magic number. | 115 |
![]() | '6' is a magic number. | 118 |
![]() | '3' is a magic number. | 121 |
![]() | '7' is a magic number. | 124 |
![]() | '+' should be on a new line. | 128 |
![]() | '+' should be on a new line. | 129 |
![]() | '8' is a magic number. | 132 |
![]() | '+' should be on a new line. | 136 |
![]() | '+' should be on a new line. | 137 |
![]() | First sentence should end with a period. | 150 |
![]() | First sentence should end with a period. | 152 |
![]() | First sentence should end with a period. | 154 |
![]() | First sentence should end with a period. | 156 |
![]() | Method 'postSuperstep' is not designed for extension - needs to be abstract, final or empty. | 169 |
![]() | '+' should be on a new line. | 176 |
![]() | '+' should be on a new line. | 177 |
![]() | Method 'getVertexCount' is not designed for extension - needs to be abstract, final or empty. | 183 |
![]() | Missing a Javadoc comment. | 183 |
![]() | Method 'getEdgeCount' is not designed for extension - needs to be abstract, final or empty. | 187 |
![]() | Missing a Javadoc comment. | 187 |
![]() | Method 'getOrigEdgeCount' is not designed for extension - needs to be abstract, final or empty. | 191 |
![]() | Missing a Javadoc comment. | 191 |
![]() | Method 'increaseEdgesRemoved' is not designed for extension - needs to be abstract, final or empty. | 198 |
Violation | Message | Line |
---|---|---|
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 36 |
![]() | Parameter messages should be final. | 37 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 36 |
![]() | Parameter messages should be final. | 37 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 57 |
![]() | First sentence should end with a period. | 60 |
![]() | Name 'SUM_AGG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 61 |
![]() | First sentence should end with a period. | 62 |
![]() | Name 'MIN_AGG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 63 |
![]() | First sentence should end with a period. | 64 |
![]() | Name 'MAX_AGG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 65 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 67 |
![]() | Parameter messages should be final. | 68 |
![]() | '0.15f' is a magic number. | 75 |
![]() | '0.85f' is a magic number. | 75 |
![]() | '+' should be on a new line. | 80 |
![]() | '+' should be on a new line. | 81 |
![]() | First sentence should end with a period. | 99 |
![]() | Name 'FINAL_MAX' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 100 |
![]() | First sentence should end with a period. | 101 |
![]() | Name 'FINAL_MIN' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 102 |
![]() | First sentence should end with a period. | 103 |
![]() | Name 'FINAL_SUM' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 104 |
![]() | Missing a Javadoc comment. | 106 |
![]() | Missing a Javadoc comment. | 110 |
![]() | Missing a Javadoc comment. | 114 |
![]() | Method 'postApplication' is not designed for extension - needs to be abstract, final or empty. | 123 |
![]() | Method 'preSuperstep' is not designed for extension - needs to be abstract, final or empty. | 134 |
![]() | '3' is a magic number. | 136 |
![]() | '+' should be on a new line. | 137 |
![]() | '+' should be on a new line. | 138 |
![]() | '!=' should be on a new line. | 140 |
![]() | '+' should be on a new line. | 142 |
![]() | '+' should be on a new line. | 143 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 163 |
![]() | First sentence should end with a period. | 172 |
![]() | First sentence should end with a period. | 178 |
![]() | Method 'nextVertex' is not designed for extension - needs to be abstract, final or empty. | 189 |
![]() | Method 'getCurrentVertex' is not designed for extension - needs to be abstract, final or empty. | 194 |
![]() | '10d' is a magic number. | 203 |
![]() | '%' should be on a new line. | 205 |
![]() | '100f' is a magic number. | 207 |
![]() | '+' should be on a new line. | 213 |
![]() | '+' should be on a new line. | 214 |
![]() | First sentence should end with a period. | 221 |
![]() | Method 'createVertexReader' is not designed for extension - needs to be abstract, final or empty. | 227 |
![]() | Parameter split should be final. | 229 |
![]() | Parameter context should be final. | 230 |
![]() | First sentence should end with a period. | 236 |
![]() | Parameter lineRecordWriter should be final. | 247 |
![]() | Method 'writeVertex' is not designed for extension - needs to be abstract, final or empty. | 251 |
![]() | Parameter vertex should be final. | 253 |
![]() | First sentence should end with a period. | 261 |
![]() | Method 'createVertexWriter' is not designed for extension - needs to be abstract, final or empty. | 266 |
![]() | Parameter context should be final. | 268 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 57 |
![]() | First sentence should end with a period. | 60 |
![]() | Name 'SUM_AGG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 61 |
![]() | First sentence should end with a period. | 62 |
![]() | Name 'MIN_AGG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 63 |
![]() | First sentence should end with a period. | 64 |
![]() | Name 'MAX_AGG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 65 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 67 |
![]() | Parameter messages should be final. | 68 |
![]() | '0.15f' is a magic number. | 75 |
![]() | '0.85f' is a magic number. | 75 |
![]() | '+' should be on a new line. | 80 |
![]() | '+' should be on a new line. | 81 |
![]() | First sentence should end with a period. | 99 |
![]() | Name 'FINAL_MAX' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 100 |
![]() | First sentence should end with a period. | 101 |
![]() | Name 'FINAL_MIN' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 102 |
![]() | First sentence should end with a period. | 103 |
![]() | Name 'FINAL_SUM' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 104 |
![]() | Missing a Javadoc comment. | 106 |
![]() | Missing a Javadoc comment. | 110 |
![]() | Missing a Javadoc comment. | 114 |
![]() | Method 'postApplication' is not designed for extension - needs to be abstract, final or empty. | 123 |
![]() | Method 'preSuperstep' is not designed for extension - needs to be abstract, final or empty. | 134 |
![]() | '3' is a magic number. | 136 |
![]() | '+' should be on a new line. | 137 |
![]() | '+' should be on a new line. | 138 |
![]() | '!=' should be on a new line. | 140 |
![]() | '+' should be on a new line. | 142 |
![]() | '+' should be on a new line. | 143 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 163 |
![]() | First sentence should end with a period. | 172 |
![]() | First sentence should end with a period. | 178 |
![]() | Method 'nextVertex' is not designed for extension - needs to be abstract, final or empty. | 189 |
![]() | Method 'getCurrentVertex' is not designed for extension - needs to be abstract, final or empty. | 194 |
![]() | '10d' is a magic number. | 203 |
![]() | '%' should be on a new line. | 205 |
![]() | '100f' is a magic number. | 207 |
![]() | '+' should be on a new line. | 213 |
![]() | '+' should be on a new line. | 214 |
![]() | First sentence should end with a period. | 221 |
![]() | Method 'createVertexReader' is not designed for extension - needs to be abstract, final or empty. | 227 |
![]() | Parameter split should be final. | 229 |
![]() | Parameter context should be final. | 230 |
![]() | First sentence should end with a period. | 236 |
![]() | Parameter lineRecordWriter should be final. | 247 |
![]() | Method 'writeVertex' is not designed for extension - needs to be abstract, final or empty. | 251 |
![]() | Parameter vertex should be final. | 253 |
![]() | First sentence should end with a period. | 261 |
![]() | Method 'createVertexWriter' is not designed for extension - needs to be abstract, final or empty. | 266 |
![]() | Parameter context should be final. | 268 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 40 |
![]() | First sentence should end with a period. | 42 |
![]() | '==' should be on a new line. | 52 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 57 |
![]() | Parameter messages should be final. | 58 |
![]() | Avoid inline conditionals. | 62 |
![]() | '+' should be on a new line. | 67 |
![]() | '+' should be on a new line. | 75 |
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 40 |
![]() | First sentence should end with a period. | 42 |
![]() | '==' should be on a new line. | 52 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 57 |
![]() | Parameter messages should be final. | 58 |
![]() | Avoid inline conditionals. | 62 |
![]() | '+' should be on a new line. | 67 |
![]() | '+' should be on a new line. | 75 |
Violation | Message | Line |
---|---|---|
![]() | Method 'combine' is not designed for extension - needs to be abstract, final or empty. | 36 |
![]() | Parameter vertexIndex should be final. | 37 |
![]() | Parameter messages should be final. | 38 |
![]() | Method 'combine' is not designed for extension - needs to be abstract, final or empty. | 36 |
![]() | Parameter vertexIndex should be final. | 37 |
![]() | Parameter messages should be final. | 38 |
Violation | Message | Line |
---|---|---|
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 49 |
![]() | Parameter messages should be final. | 50 |
![]() | '3' is a magic number. | 51 |
![]() | First sentence should end with a period. | 56 |
![]() | First sentence should end with a period. | 62 |
![]() | Method 'nextVertex' is not designed for extension - needs to be abstract, final or empty. | 72 |
![]() | Method 'getCurrentVertex' is not designed for extension - needs to be abstract, final or empty. | 77 |
![]() | '?' should be on a new line. | 84 |
![]() | Avoid inline conditionals. | 84 |
![]() | '-' should be on a new line. | 85 |
![]() | ':' should be on a new line. | 86 |
![]() | '10' is a magic number. | 90 |
![]() | '%' should be on a new line. | 93 |
![]() | '100f' is a magic number. | 95 |
![]() | '+' should be on a new line. | 101 |
![]() | '+' should be on a new line. | 102 |
![]() | '+' should be on a new line. | 103 |
![]() | First sentence should end with a period. | 110 |
![]() | Method 'createVertexReader' is not designed for extension - needs to be abstract, final or empty. | 116 |
![]() | Parameter split should be final. | 118 |
![]() | Parameter context should be final. | 118 |
![]() | First sentence should end with a period. | 124 |
![]() | Parameter lineRecordWriter should be final. | 135 |
![]() | Method 'writeVertex' is not designed for extension - needs to be abstract, final or empty. | 139 |
![]() | Parameter vertex should be final. | 140 |
![]() | First sentence should end with a period. | 148 |
![]() | Method 'createVertexWriter' is not designed for extension - needs to be abstract, final or empty. | 153 |
![]() | Parameter context should be final. | 155 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 49 |
![]() | Parameter messages should be final. | 50 |
![]() | '3' is a magic number. | 51 |
![]() | First sentence should end with a period. | 56 |
![]() | First sentence should end with a period. | 62 |
![]() | Method 'nextVertex' is not designed for extension - needs to be abstract, final or empty. | 72 |
![]() | Method 'getCurrentVertex' is not designed for extension - needs to be abstract, final or empty. | 77 |
![]() | '?' should be on a new line. | 84 |
![]() | Avoid inline conditionals. | 84 |
![]() | '-' should be on a new line. | 85 |
![]() | ':' should be on a new line. | 86 |
![]() | '10' is a magic number. | 90 |
![]() | '%' should be on a new line. | 93 |
![]() | '100f' is a magic number. | 95 |
![]() | '+' should be on a new line. | 101 |
![]() | '+' should be on a new line. | 102 |
![]() | '+' should be on a new line. | 103 |
![]() | First sentence should end with a period. | 110 |
![]() | Method 'createVertexReader' is not designed for extension - needs to be abstract, final or empty. | 116 |
![]() | Parameter split should be final. | 118 |
![]() | Parameter context should be final. | 118 |
![]() | First sentence should end with a period. | 124 |
![]() | Parameter lineRecordWriter should be final. | 135 |
![]() | Method 'writeVertex' is not designed for extension - needs to be abstract, final or empty. | 139 |
![]() | Parameter vertex should be final. | 140 |
![]() | First sentence should end with a period. | 148 |
![]() | Method 'createVertexWriter' is not designed for extension - needs to be abstract, final or empty. | 153 |
![]() | Parameter context should be final. | 155 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 67 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 71 |
![]() | Parameter messages should be final. | 72 |
![]() | '?' should be on a new line. | 80 |
![]() | Avoid inline conditionals. | 80 |
![]() | First sentence should end with a period. | 105 |
![]() | First sentence should end with a period. | 107 |
![]() | First sentence should end with a period. | 110 |
![]() | First sentence should end with a period. | 113 |
![]() | Parameter k should be final. | 117 |
![]() | Parameter v should be final. | 117 |
![]() | First sentence should end with a period. | 121 |
![]() | Method 'getKey' is not designed for extension - needs to be abstract, final or empty. | 123 |
![]() | First sentence should end with a period. | 124 |
![]() | Method 'getValue' is not designed for extension - needs to be abstract, final or empty. | 126 |
![]() | First sentence should end with a period. | 127 |
![]() | Method 'compareTo' is not designed for extension - needs to be abstract, final or empty. | 130 |
![]() | Parameter other should be final. | 131 |
![]() | First sentence should end with a period. | 136 |
![]() | First sentence should end with a period. | 140 |
![]() | First sentence should end with a period. | 144 |
![]() | Method 'setClass' is not designed for extension - needs to be abstract, final or empty. | 145 |
![]() | First sentence should end with a period. | 67 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 71 |
![]() | Parameter messages should be final. | 72 |
![]() | '?' should be on a new line. | 80 |
![]() | Avoid inline conditionals. | 80 |
![]() | First sentence should end with a period. | 105 |
![]() | First sentence should end with a period. | 107 |
![]() | First sentence should end with a period. | 110 |
![]() | First sentence should end with a period. | 113 |
![]() | Parameter k should be final. | 117 |
![]() | Parameter v should be final. | 117 |
![]() | First sentence should end with a period. | 121 |
![]() | Method 'getKey' is not designed for extension - needs to be abstract, final or empty. | 123 |
![]() | First sentence should end with a period. | 124 |
![]() | Method 'getValue' is not designed for extension - needs to be abstract, final or empty. | 126 |
![]() | First sentence should end with a period. | 127 |
![]() | Method 'compareTo' is not designed for extension - needs to be abstract, final or empty. | 130 |
![]() | Parameter other should be final. | 131 |
![]() | First sentence should end with a period. | 136 |
![]() | First sentence should end with a period. | 140 |
![]() | First sentence should end with a period. | 144 |
![]() | Method 'setClass' is not designed for extension - needs to be abstract, final or empty. | 145 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 50 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 53 |
![]() | Parameter messages should be final. | 54 |
![]() | '+' should be on a new line. | 61 |
![]() | First sentence should end with a period. | 73 |
![]() | Method 'preApplication' is not designed for extension - needs to be abstract, final or empty. | 78 |
![]() | '+' should be on a new line. | 90 |
![]() | '+' should be on a new line. | 96 |
![]() | '+' should be on a new line. | 100 |
![]() | '+' should be on a new line. | 103 |
![]() | Method 'postApplication' is not designed for extension - needs to be abstract, final or empty. | 114 |
![]() | Method 'emit' is not designed for extension - needs to be abstract, final or empty. | 139 |
![]() | Parameter s should be final. | 139 |
![]() | Method 'run' is not designed for extension - needs to be abstract, final or empty. | 148 |
![]() | Parameter args should be final. | 149 |
![]() | '100.0f' is a magic number. | 163 |
![]() | Parameter args should be final. | 177 |
![]() | Expected @throws tag for 'Exception'. | 177 |
![]() | First sentence should end with a period. | 50 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 53 |
![]() | Parameter messages should be final. | 54 |
![]() | '+' should be on a new line. | 61 |
![]() | First sentence should end with a period. | 73 |
![]() | Method 'preApplication' is not designed for extension - needs to be abstract, final or empty. | 78 |
![]() | '+' should be on a new line. | 90 |
![]() | '+' should be on a new line. | 96 |
![]() | '+' should be on a new line. | 100 |
![]() | '+' should be on a new line. | 103 |
![]() | Method 'postApplication' is not designed for extension - needs to be abstract, final or empty. | 114 |
![]() | Method 'emit' is not designed for extension - needs to be abstract, final or empty. | 139 |
![]() | Parameter s should be final. | 139 |
![]() | Method 'run' is not designed for extension - needs to be abstract, final or empty. | 148 |
![]() | Parameter args should be final. | 149 |
![]() | '100.0f' is a magic number. | 163 |
![]() | Parameter args should be final. | 177 |
![]() | Expected @throws tag for 'Exception'. | 177 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 46 |
![]() | First sentence should end with a period. | 48 |
![]() | First sentence should end with a period. | 50 |
![]() | Parameter superstep should be final. | 65 |
![]() | 'superstep' hides a field. | 65 |
![]() | Parameter sourceVertexId should be final. | 65 |
![]() | 'sourceVertexId' hides a field. | 65 |
![]() | Parameter value should be final. | 65 |
![]() | 'value' hides a field. | 65 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 71 |
![]() | Parameter input should be final. | 72 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 78 |
![]() | Parameter output should be final. | 79 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 85 |
![]() | '+' should be on a new line. | 87 |
![]() | First sentence should end with a period. | 98 |
![]() | First sentence should end with a period. | 101 |
![]() | Name 'FINAL_SUM' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 102 |
![]() | First sentence should end with a period. | 103 |
![]() | Name 'SUPERSTEPS' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 104 |
![]() | '6' is a magic number. | 104 |
![]() | First sentence should end with a period. | 105 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 106 |
![]() | Missing a Javadoc comment. | 108 |
![]() | Method 'preApplication' is not designed for extension - needs to be abstract, final or empty. | 117 |
![]() | Method 'postApplication' is not designed for extension - needs to be abstract, final or empty. | 124 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 139 |
![]() | Parameter messages should be final. | 140 |
![]() | '+' should be on a new line. | 151 |
![]() | '+' should be on a new line. | 152 |
![]() | '+' should be on a new line. | 159 |
![]() | '+' should be on a new line. | 160 |
![]() | '+' should be on a new line. | 161 |
![]() | '+' should be on a new line. | 166 |
![]() | '+' should be on a new line. | 167 |
![]() | '&&' should be on a new line. | 170 |
![]() | '+' should be on a new line. | 173 |
![]() | '+' should be on a new line. | 174 |
![]() | '+' should be on a new line. | 181 |
![]() | '+' should be on a new line. | 182 |
![]() | '+' should be on a new line. | 189 |
![]() | '+' should be on a new line. | 190 |
![]() | '+' should be on a new line. | 191 |
![]() | '+' should be on a new line. | 192 |
![]() | '+' should be on a new line. | 193 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 210 |
![]() | First sentence should end with a period. | 46 |
![]() | First sentence should end with a period. | 48 |
![]() | First sentence should end with a period. | 50 |
![]() | Parameter superstep should be final. | 65 |
![]() | 'superstep' hides a field. | 65 |
![]() | Parameter sourceVertexId should be final. | 65 |
![]() | 'sourceVertexId' hides a field. | 65 |
![]() | Parameter value should be final. | 65 |
![]() | 'value' hides a field. | 65 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 71 |
![]() | Parameter input should be final. | 72 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 78 |
![]() | Parameter output should be final. | 79 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 85 |
![]() | '+' should be on a new line. | 87 |
![]() | First sentence should end with a period. | 98 |
![]() | First sentence should end with a period. | 101 |
![]() | Name 'FINAL_SUM' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 102 |
![]() | First sentence should end with a period. | 103 |
![]() | Name 'SUPERSTEPS' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 104 |
![]() | '6' is a magic number. | 104 |
![]() | First sentence should end with a period. | 105 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 106 |
![]() | Missing a Javadoc comment. | 108 |
![]() | Method 'preApplication' is not designed for extension - needs to be abstract, final or empty. | 117 |
![]() | Method 'postApplication' is not designed for extension - needs to be abstract, final or empty. | 124 |
![]() | Method 'compute' is not designed for extension - needs to be abstract, final or empty. | 139 |
![]() | Parameter messages should be final. | 140 |
![]() | '+' should be on a new line. | 151 |
![]() | '+' should be on a new line. | 152 |
![]() | '+' should be on a new line. | 159 |
![]() | '+' should be on a new line. | 160 |
![]() | '+' should be on a new line. | 161 |
![]() | '+' should be on a new line. | 166 |
![]() | '+' should be on a new line. | 167 |
![]() | '&&' should be on a new line. | 170 |
![]() | '+' should be on a new line. | 173 |
![]() | '+' should be on a new line. | 174 |
![]() | '+' should be on a new line. | 181 |
![]() | '+' should be on a new line. | 182 |
![]() | '+' should be on a new line. | 189 |
![]() | '+' should be on a new line. | 190 |
![]() | '+' should be on a new line. | 191 |
![]() | '+' should be on a new line. | 192 |
![]() | '+' should be on a new line. | 193 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 210 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 63 |
![]() | First sentence should end with a period. | 63 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 31 |
![]() | First sentence should end with a period. | 33 |
![]() | First sentence should end with a period. | 35 |
![]() | First sentence should end with a period. | 37 |
![]() | Parameter aggregatorClass should be final. | 47 |
![]() | Parameter persistent should be final. | 48 |
![]() | 'persistent' hides a field. | 48 |
![]() | Expected @throws tag for 'IllegalAccessException'. | 48 |
![]() | Expected @throws tag for 'InstantiationException'. | 49 |
![]() | First sentence should end with a period. | 56 |
![]() | Method 'getPreviousAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 61 |
![]() | First sentence should end with a period. | 65 |
![]() | Method 'setPreviousAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 70 |
![]() | Parameter value should be final. | 70 |
![]() | First sentence should end with a period. | 74 |
![]() | Method 'isPersistent' is not designed for extension - needs to be abstract, final or empty. | 79 |
![]() | First sentence should end with a period. | 83 |
![]() | Method 'isChanged' is not designed for extension - needs to be abstract, final or empty. | 88 |
![]() | First sentence should end with a period. | 92 |
![]() | Method 'aggregateCurrent' is not designed for extension - needs to be abstract, final or empty. | 97 |
![]() | Parameter value should be final. | 97 |
![]() | First sentence should end with a period. | 102 |
![]() | Method 'getCurrentAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 107 |
![]() | First sentence should end with a period. | 111 |
![]() | Method 'setCurrentAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 116 |
![]() | Parameter value should be final. | 116 |
![]() | First sentence should end with a period. | 121 |
![]() | Method 'resetCurrentAggregator' is not designed for extension - needs to be abstract, final or empty. | 124 |
![]() | First sentence should end with a period. | 129 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 134 |
![]() | First sentence should end with a period. | 138 |
![]() | Method 'getAggregatorClass' is not designed for extension - needs to be abstract, final or empty. | 143 |
![]() | First sentence should end with a period. | 31 |
![]() | First sentence should end with a period. | 33 |
![]() | First sentence should end with a period. | 35 |
![]() | First sentence should end with a period. | 37 |
![]() | Parameter aggregatorClass should be final. | 47 |
![]() | Parameter persistent should be final. | 48 |
![]() | 'persistent' hides a field. | 48 |
![]() | Expected @throws tag for 'IllegalAccessException'. | 48 |
![]() | Expected @throws tag for 'InstantiationException'. | 49 |
![]() | First sentence should end with a period. | 56 |
![]() | Method 'getPreviousAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 61 |
![]() | First sentence should end with a period. | 65 |
![]() | Method 'setPreviousAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 70 |
![]() | Parameter value should be final. | 70 |
![]() | First sentence should end with a period. | 74 |
![]() | Method 'isPersistent' is not designed for extension - needs to be abstract, final or empty. | 79 |
![]() | First sentence should end with a period. | 83 |
![]() | Method 'isChanged' is not designed for extension - needs to be abstract, final or empty. | 88 |
![]() | First sentence should end with a period. | 92 |
![]() | Method 'aggregateCurrent' is not designed for extension - needs to be abstract, final or empty. | 97 |
![]() | Parameter value should be final. | 97 |
![]() | First sentence should end with a period. | 102 |
![]() | Method 'getCurrentAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 107 |
![]() | First sentence should end with a period. | 111 |
![]() | Method 'setCurrentAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 116 |
![]() | Parameter value should be final. | 116 |
![]() | First sentence should end with a period. | 121 |
![]() | Method 'resetCurrentAggregator' is not designed for extension - needs to be abstract, final or empty. | 124 |
![]() | First sentence should end with a period. | 129 |
![]() | Method 'createInitialValue' is not designed for extension - needs to be abstract, final or empty. | 134 |
![]() | First sentence should end with a period. | 138 |
![]() | Method 'getAggregatorClass' is not designed for extension - needs to be abstract, final or empty. | 143 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 35 |
![]() | Expected @throws tag for 'IOException'. | 49 |
![]() | Expected @throws tag for 'IOException'. | 62 |
![]() | Expected @throws tag for 'IOException'. | 72 |
![]() | First sentence should end with a period. | 35 |
![]() | Expected @throws tag for 'IOException'. | 49 |
![]() | Expected @throws tag for 'IOException'. | 62 |
![]() | Expected @throws tag for 'IOException'. | 72 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 66 |
![]() | First sentence should end with a period. | 68 |
![]() | First sentence should end with a period. | 70 |
![]() | First sentence should end with a period. | 72 |
![]() | First sentence should end with a period. | 74 |
![]() | First sentence should end with a period. | 76 |
![]() | First sentence should end with a period. | 78 |
![]() | First sentence should end with a period. | 80 |
![]() | First sentence should end with a period. | 83 |
![]() | First sentence should end with a period. | 86 |
![]() | First sentence should end with a period. | 92 |
![]() | First sentence should end with a period. | 95 |
![]() | First sentence should end with a period. | 97 |
![]() | First sentence should end with a period. | 99 |
![]() | First sentence should end with a period. | 101 |
![]() | First sentence should end with a period. | 108 |
![]() | First sentence should end with a period. | 111 |
![]() | First sentence should end with a period. | 113 |
![]() | First sentence should end with a period. | 116 |
![]() | First sentence should end with a period. | 119 |
![]() | First sentence should end with a period. | 121 |
![]() | First sentence should end with a period. | 123 |
![]() | First sentence should end with a period. | 126 |
![]() | First sentence should end with a period. | 129 |
![]() | First sentence should end with a period. | 132 |
![]() | First sentence should end with a period. | 134 |
![]() | First sentence should end with a period. | 136 |
![]() | First sentence should end with a period. | 138 |
![]() | First sentence should end with a period. | 140 |
![]() | First sentence should end with a period. | 143 |
![]() | First sentence should end with a period. | 145 |
![]() | First sentence should end with a period. | 147 |
![]() | First sentence should end with a period. | 150 |
![]() | First sentence should end with a period. | 153 |
![]() | First sentence should end with a period. | 155 |
![]() | First sentence should end with a period. | 157 |
![]() | First sentence should end with a period. | 160 |
![]() | First sentence should end with a period. | 163 |
![]() | First sentence should end with a period. | 165 |
![]() | First sentence should end with a period. | 168 |
![]() | First sentence should end with a period. | 170 |
![]() | First sentence should end with a period. | 172 |
![]() | First sentence should end with a period. | 174 |
![]() | First sentence should end with a period. | 181 |
![]() | First sentence should end with a period. | 191 |
![]() | First sentence should end with a period. | 193 |
![]() | Variable 'basePath' must be private and have accessor methods. | 194 |
![]() | First sentence should end with a period. | 195 |
![]() | Variable 'masterJobStatePath' must be private and have accessor methods. | 196 |
![]() | First sentence should end with a period. | 197 |
![]() | Variable 'inputSplitsPath' must be private and have accessor methods. | 198 |
![]() | First sentence should end with a period. | 199 |
![]() | Variable 'inputSplitsAllReadyPath' must be private and have accessor methods. | 200 |
![]() | First sentence should end with a period. | 201 |
![]() | Variable 'inputSplitsDonePath' must be private and have accessor methods. | 202 |
![]() | First sentence should end with a period. | 203 |
![]() | Variable 'inputSplitsAllDonePath' must be private and have accessor methods. | 204 |
![]() | First sentence should end with a period. | 205 |
![]() | Variable 'applicationAttemptsPath' must be private and have accessor methods. | 206 |
![]() | First sentence should end with a period. | 207 |
![]() | Variable 'cleanedUpPath' must be private and have accessor methods. | 208 |
![]() | First sentence should end with a period. | 209 |
![]() | Variable 'checkpointBasePath' must be private and have accessor methods. | 210 |
![]() | First sentence should end with a period. | 211 |
![]() | Variable 'masterElectionPath' must be private and have accessor methods. | 212 |
![]() | First sentence should end with a period. | 213 |
![]() | Variable 'currentMasterPath' must be private and have accessor methods. | 214 |
![]() | First sentence should end with a period. | 215 |
![]() | First sentence should end with a period. | 219 |
![]() | First sentence should end with a period. | 221 |
![]() | First sentence should end with a period. | 223 |
![]() | First sentence should end with a period. | 225 |
![]() | First sentence should end with a period. | 227 |
![]() | First sentence should end with a period. | 231 |
![]() | First sentence should end with a period. | 233 |
![]() | First sentence should end with a period. | 235 |
![]() | First sentence should end with a period. | 237 |
![]() | First sentence should end with a period. | 239 |
![]() | First sentence should end with a period. | 242 |
![]() | First sentence should end with a period. | 244 |
![]() | First sentence should end with a period. | 246 |
![]() | First sentence should end with a period. | 248 |
![]() | First sentence should end with a period. | 250 |
![]() | First sentence should end with a period. | 252 |
![]() | First sentence should end with a period. | 254 |
![]() | First sentence should end with a period. | 256 |
![]() | First sentence should end with a period. | 258 |
![]() | First sentence should end with a period. | 260 |
![]() | First sentence should end with a period. | 262 |
![]() | First sentence should end with a period. | 264 |
![]() | First sentence should end with a period. | 266 |
![]() | First sentence should end with a period. | 268 |
![]() | Parameter serverPortList should be final. | 280 |
![]() | Parameter sessionMsecTimeout should be final. | 281 |
![]() | Parameter context should be final. | 282 |
![]() | 'context' hides a field. | 282 |
![]() | Parameter graphMapper should be final. | 283 |
![]() | 'graphMapper' hides a field. | 283 |
![]() | '&&' should be on a new line. | 314 |
![]() | '+' should be on a new line. | 317 |
![]() | '+' should be on a new line. | 348 |
![]() | First sentence should end with a period. | 361 |
![]() | Parameter path should be final. | 367 |
![]() | '+' should be on a new line. | 371 |
![]() | '+' should be on a new line. | 375 |
![]() | '+' should be on a new line. | 379 |
![]() | '+' should be on a new line. | 383 |
![]() | First sentence should end with a period. | 389 |
![]() | Parameter path should be final. | 395 |
![]() | '+' should be on a new line. | 399 |
![]() | First sentence should end with a period. | 406 |
![]() | Parameter attempt should be final. | 413 |
![]() | First sentence should end with a period. | 417 |
![]() | Parameter attempt should be final. | 425 |
![]() | Parameter superstep should be final. | 426 |
![]() | '+' should be on a new line. | 427 |
![]() | First sentence should end with a period. | 431 |
![]() | Parameter attempt should be final. | 439 |
![]() | Parameter superstep should be final. | 440 |
![]() | '+' should be on a new line. | 441 |
![]() | First sentence should end with a period. | 445 |
![]() | Parameter attempt should be final. | 453 |
![]() | Parameter superstep should be final. | 454 |
![]() | '+' should be on a new line. | 455 |
![]() | First sentence should end with a period. | 459 |
![]() | Parameter attempt should be final. | 467 |
![]() | Parameter superstep should be final. | 467 |
![]() | '+' should be on a new line. | 468 |
![]() | First sentence should end with a period. | 472 |
![]() | Parameter attempt should be final. | 479 |
![]() | Parameter superstep should be final. | 480 |
![]() | '+' should be on a new line. | 481 |
![]() | First sentence should end with a period. | 485 |
![]() | Parameter attempt should be final. | 492 |
![]() | Parameter superstep should be final. | 493 |
![]() | '+' should be on a new line. | 494 |
![]() | Parameter attempt should be final. | 507 |
![]() | Parameter superstep should be final. | 508 |
![]() | Parameter workerInfo should be final. | 509 |
![]() | '+' should be on a new line. | 510 |
![]() | First sentence should end with a period. | 514 |
![]() | Parameter attempt should be final. | 521 |
![]() | Parameter superstep should be final. | 521 |
![]() | '+' should be on a new line. | 522 |
![]() | First sentence should end with a period. | 526 |
![]() | Parameter attempt should be final. | 533 |
![]() | Parameter superstep should be final. | 533 |
![]() | '+' should be on a new line. | 534 |
![]() | First sentence should end with a period. | 538 |
![]() | Parameter superstep should be final. | 545 |
![]() | First sentence should end with a period. | 549 |
![]() | Parameter finalizedPath should be final. | 555 |
![]() | '+' should be on a new line. | 558 |
![]() | First sentence should end with a period. | 580 |
![]() | Parameter superstep should be final. | 585 |
![]() | Parameter superstep should be final. | 601 |
![]() | First sentence should end with a period. | 615 |
![]() | Missing a Javadoc comment. | 624 |
![]() | Missing a Javadoc comment. | 628 |
![]() | Missing a Javadoc comment. | 632 |
![]() | Missing a Javadoc comment. | 636 |
![]() | Missing a Javadoc comment. | 640 |
![]() | Missing a Javadoc comment. | 644 |
![]() | Missing a Javadoc comment. | 648 |
![]() | Missing a Javadoc comment. | 652 |
![]() | Missing a Javadoc comment. | 656 |
![]() | Missing a Javadoc comment. | 660 |
![]() | Missing a Javadoc comment. | 664 |
![]() | Missing a Javadoc comment. | 668 |
![]() | Missing a Javadoc comment. | 673 |
![]() | Missing a Javadoc comment. | 677 |
![]() | Missing a Javadoc comment. | 682 |
![]() | Missing a Javadoc comment. | 686 |
![]() | '+' should be on a new line. | 706 |
![]() | '+' should be on a new line. | 709 |
![]() | '+' should be on a new line. | 712 |
![]() | '+' should be on a new line. | 727 |
![]() | '+' should be on a new line. | 730 |
![]() | '+' should be on a new line. | 733 |
![]() | First sentence should end with a period. | 744 |
![]() | '+' should be on a new line. | 769 |
![]() | '+' should be on a new line. | 772 |
![]() | '+' should be on a new line. | 775 |
![]() | '+' should be on a new line. | 789 |
![]() | '+' should be on a new line. | 792 |
![]() | '+' should be on a new line. | 819 |
![]() | '+' should be on a new line. | 857 |
![]() | Parameter superstep should be final. | 869 |
![]() | First sentence should end with a period. | 873 |
![]() | Parameter applicationAttempt should be final. | 879 |
![]() | '+' should be on a new line. | 890 |
![]() | '+' should be on a new line. | 894 |
![]() | '+' should be on a new line. | 898 |
![]() | Method 'registerAggregator' is not designed for extension - needs to be abstract, final or empty. | 915 |
![]() | Parameter name should be final. | 916 |
![]() | Parameter aggregatorClass should be final. | 916 |
![]() | Parameter persistent should be final. | 917 |
![]() | Expected @throws tag for 'InstantiationException'. | 917 |
![]() | Expected @throws tag for 'IllegalAccessException'. | 918 |
![]() | Method 'getAggregator' is not designed for extension - needs to be abstract, final or empty. | 939 |
![]() | Parameter name should be final. | 939 |
![]() | Method 'getAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 950 |
![]() | Parameter name should be final. | 950 |
![]() | Method 'getAggregatorMap' is not designed for extension - needs to be abstract, final or empty. | 964 |
![]() | Method 'registerBspEvent' is not designed for extension - needs to be abstract, final or empty. | 975 |
![]() | Parameter event should be final. | 975 |
![]() | First sentence should end with a period. | 979 |
![]() | Method 'getGraphPartitionerFactory' is not designed for extension - needs to be abstract, final or empty. | 984 |
![]() | Method 'processEvent' is not designed for extension - needs to be abstract, final or empty. | 995 |
![]() | Parameter event should be final. | 995 |
![]() | Parameter event should be final. | 1000 |
![]() | '+' should be on a new line. | 1004 |
![]() | '+' should be on a new line. | 1005 |
![]() | '+' should be on a new line. | 1016 |
![]() | '||' should be on a new line. | 1035 |
![]() | '&&' should be on a new line. | 1036 |
![]() | '+' should be on a new line. | 1039 |
![]() | '&&' should be on a new line. | 1044 |
![]() | '+' should be on a new line. | 1047 |
![]() | '&&' should be on a new line. | 1052 |
![]() | '+' should be on a new line. | 1055 |
![]() | '&&' should be on a new line. | 1060 |
![]() | '+' should be on a new line. | 1063 |
![]() | '&&' should be on a new line. | 1068 |
![]() | '+' should be on a new line. | 1071 |
![]() | '&&' should be on a new line. | 1076 |
![]() | '+' should be on a new line. | 1079 |
![]() | '&&' should be on a new line. | 1084 |
![]() | '+' should be on a new line. | 1087 |
![]() | '&&' should be on a new line. | 1092 |
![]() | '+' should be on a new line. | 1095 |
![]() | '&&' should be on a new line. | 1100 |
![]() | '&&' should be on a new line. | 1107 |
![]() | '&&' should be on a new line. | 1114 |
![]() | '&&' should be on a new line. | 1121 |
![]() | '+' should be on a new line. | 1131 |
![]() | '+' should be on a new line. | 1132 |
![]() | First sentence should end with a period. | 66 |
![]() | First sentence should end with a period. | 68 |
![]() | First sentence should end with a period. | 70 |
![]() | First sentence should end with a period. | 72 |
![]() | First sentence should end with a period. | 74 |
![]() | First sentence should end with a period. | 76 |
![]() | First sentence should end with a period. | 78 |
![]() | First sentence should end with a period. | 80 |
![]() | First sentence should end with a period. | 83 |
![]() | First sentence should end with a period. | 86 |
![]() | First sentence should end with a period. | 92 |
![]() | First sentence should end with a period. | 95 |
![]() | First sentence should end with a period. | 97 |
![]() | First sentence should end with a period. | 99 |
![]() | First sentence should end with a period. | 101 |
![]() | First sentence should end with a period. | 108 |
![]() | First sentence should end with a period. | 111 |
![]() | First sentence should end with a period. | 113 |
![]() | First sentence should end with a period. | 116 |
![]() | First sentence should end with a period. | 119 |
![]() | First sentence should end with a period. | 121 |
![]() | First sentence should end with a period. | 123 |
![]() | First sentence should end with a period. | 126 |
![]() | First sentence should end with a period. | 129 |
![]() | First sentence should end with a period. | 132 |
![]() | First sentence should end with a period. | 134 |
![]() | First sentence should end with a period. | 136 |
![]() | First sentence should end with a period. | 138 |
![]() | First sentence should end with a period. | 140 |
![]() | First sentence should end with a period. | 143 |
![]() | First sentence should end with a period. | 145 |
![]() | First sentence should end with a period. | 147 |
![]() | First sentence should end with a period. | 150 |
![]() | First sentence should end with a period. | 153 |
![]() | First sentence should end with a period. | 155 |
![]() | First sentence should end with a period. | 157 |
![]() | First sentence should end with a period. | 160 |
![]() | First sentence should end with a period. | 163 |
![]() | First sentence should end with a period. | 165 |
![]() | First sentence should end with a period. | 168 |
![]() | First sentence should end with a period. | 170 |
![]() | First sentence should end with a period. | 172 |
![]() | First sentence should end with a period. | 174 |
![]() | First sentence should end with a period. | 181 |
![]() | First sentence should end with a period. | 191 |
![]() | First sentence should end with a period. | 193 |
![]() | Variable 'basePath' must be private and have accessor methods. | 194 |
![]() | First sentence should end with a period. | 195 |
![]() | Variable 'masterJobStatePath' must be private and have accessor methods. | 196 |
![]() | First sentence should end with a period. | 197 |
![]() | Variable 'inputSplitsPath' must be private and have accessor methods. | 198 |
![]() | First sentence should end with a period. | 199 |
![]() | Variable 'inputSplitsAllReadyPath' must be private and have accessor methods. | 200 |
![]() | First sentence should end with a period. | 201 |
![]() | Variable 'inputSplitsDonePath' must be private and have accessor methods. | 202 |
![]() | First sentence should end with a period. | 203 |
![]() | Variable 'inputSplitsAllDonePath' must be private and have accessor methods. | 204 |
![]() | First sentence should end with a period. | 205 |
![]() | Variable 'applicationAttemptsPath' must be private and have accessor methods. | 206 |
![]() | First sentence should end with a period. | 207 |
![]() | Variable 'cleanedUpPath' must be private and have accessor methods. | 208 |
![]() | First sentence should end with a period. | 209 |
![]() | Variable 'checkpointBasePath' must be private and have accessor methods. | 210 |
![]() | First sentence should end with a period. | 211 |
![]() | Variable 'masterElectionPath' must be private and have accessor methods. | 212 |
![]() | First sentence should end with a period. | 213 |
![]() | Variable 'currentMasterPath' must be private and have accessor methods. | 214 |
![]() | First sentence should end with a period. | 215 |
![]() | First sentence should end with a period. | 219 |
![]() | First sentence should end with a period. | 221 |
![]() | First sentence should end with a period. | 223 |
![]() | First sentence should end with a period. | 225 |
![]() | First sentence should end with a period. | 227 |
![]() | First sentence should end with a period. | 231 |
![]() | First sentence should end with a period. | 233 |
![]() | First sentence should end with a period. | 235 |
![]() | First sentence should end with a period. | 237 |
![]() | First sentence should end with a period. | 239 |
![]() | First sentence should end with a period. | 242 |
![]() | First sentence should end with a period. | 244 |
![]() | First sentence should end with a period. | 246 |
![]() | First sentence should end with a period. | 248 |
![]() | First sentence should end with a period. | 250 |
![]() | First sentence should end with a period. | 252 |
![]() | First sentence should end with a period. | 254 |
![]() | First sentence should end with a period. | 256 |
![]() | First sentence should end with a period. | 258 |
![]() | First sentence should end with a period. | 260 |
![]() | First sentence should end with a period. | 262 |
![]() | First sentence should end with a period. | 264 |
![]() | First sentence should end with a period. | 266 |
![]() | First sentence should end with a period. | 268 |
![]() | Parameter serverPortList should be final. | 280 |
![]() | Parameter sessionMsecTimeout should be final. | 281 |
![]() | Parameter context should be final. | 282 |
![]() | 'context' hides a field. | 282 |
![]() | Parameter graphMapper should be final. | 283 |
![]() | 'graphMapper' hides a field. | 283 |
![]() | '&&' should be on a new line. | 314 |
![]() | '+' should be on a new line. | 317 |
![]() | '+' should be on a new line. | 348 |
![]() | First sentence should end with a period. | 361 |
![]() | Parameter path should be final. | 367 |
![]() | '+' should be on a new line. | 371 |
![]() | '+' should be on a new line. | 375 |
![]() | '+' should be on a new line. | 379 |
![]() | '+' should be on a new line. | 383 |
![]() | First sentence should end with a period. | 389 |
![]() | Parameter path should be final. | 395 |
![]() | '+' should be on a new line. | 399 |
![]() | First sentence should end with a period. | 406 |
![]() | Parameter attempt should be final. | 413 |
![]() | First sentence should end with a period. | 417 |
![]() | Parameter attempt should be final. | 425 |
![]() | Parameter superstep should be final. | 426 |
![]() | '+' should be on a new line. | 427 |
![]() | First sentence should end with a period. | 431 |
![]() | Parameter attempt should be final. | 439 |
![]() | Parameter superstep should be final. | 440 |
![]() | '+' should be on a new line. | 441 |
![]() | First sentence should end with a period. | 445 |
![]() | Parameter attempt should be final. | 453 |
![]() | Parameter superstep should be final. | 454 |
![]() | '+' should be on a new line. | 455 |
![]() | First sentence should end with a period. | 459 |
![]() | Parameter attempt should be final. | 467 |
![]() | Parameter superstep should be final. | 467 |
![]() | '+' should be on a new line. | 468 |
![]() | First sentence should end with a period. | 472 |
![]() | Parameter attempt should be final. | 479 |
![]() | Parameter superstep should be final. | 480 |
![]() | '+' should be on a new line. | 481 |
![]() | First sentence should end with a period. | 485 |
![]() | Parameter attempt should be final. | 492 |
![]() | Parameter superstep should be final. | 493 |
![]() | '+' should be on a new line. | 494 |
![]() | Parameter attempt should be final. | 507 |
![]() | Parameter superstep should be final. | 508 |
![]() | Parameter workerInfo should be final. | 509 |
![]() | '+' should be on a new line. | 510 |
![]() | First sentence should end with a period. | 514 |
![]() | Parameter attempt should be final. | 521 |
![]() | Parameter superstep should be final. | 521 |
![]() | '+' should be on a new line. | 522 |
![]() | First sentence should end with a period. | 526 |
![]() | Parameter attempt should be final. | 533 |
![]() | Parameter superstep should be final. | 533 |
![]() | '+' should be on a new line. | 534 |
![]() | First sentence should end with a period. | 538 |
![]() | Parameter superstep should be final. | 545 |
![]() | First sentence should end with a period. | 549 |
![]() | Parameter finalizedPath should be final. | 555 |
![]() | '+' should be on a new line. | 558 |
![]() | First sentence should end with a period. | 580 |
![]() | Parameter superstep should be final. | 585 |
![]() | Parameter superstep should be final. | 601 |
![]() | First sentence should end with a period. | 615 |
![]() | Missing a Javadoc comment. | 624 |
![]() | Missing a Javadoc comment. | 628 |
![]() | Missing a Javadoc comment. | 632 |
![]() | Missing a Javadoc comment. | 636 |
![]() | Missing a Javadoc comment. | 640 |
![]() | Missing a Javadoc comment. | 644 |
![]() | Missing a Javadoc comment. | 648 |
![]() | Missing a Javadoc comment. | 652 |
![]() | Missing a Javadoc comment. | 656 |
![]() | Missing a Javadoc comment. | 660 |
![]() | Missing a Javadoc comment. | 664 |
![]() | Missing a Javadoc comment. | 668 |
![]() | Missing a Javadoc comment. | 673 |
![]() | Missing a Javadoc comment. | 677 |
![]() | Missing a Javadoc comment. | 682 |
![]() | Missing a Javadoc comment. | 686 |
![]() | '+' should be on a new line. | 706 |
![]() | '+' should be on a new line. | 709 |
![]() | '+' should be on a new line. | 712 |
![]() | '+' should be on a new line. | 727 |
![]() | '+' should be on a new line. | 730 |
![]() | '+' should be on a new line. | 733 |
![]() | First sentence should end with a period. | 744 |
![]() | '+' should be on a new line. | 769 |
![]() | '+' should be on a new line. | 772 |
![]() | '+' should be on a new line. | 775 |
![]() | '+' should be on a new line. | 789 |
![]() | '+' should be on a new line. | 792 |
![]() | '+' should be on a new line. | 819 |
![]() | '+' should be on a new line. | 857 |
![]() | Parameter superstep should be final. | 869 |
![]() | First sentence should end with a period. | 873 |
![]() | Parameter applicationAttempt should be final. | 879 |
![]() | '+' should be on a new line. | 890 |
![]() | '+' should be on a new line. | 894 |
![]() | '+' should be on a new line. | 898 |
![]() | Method 'registerAggregator' is not designed for extension - needs to be abstract, final or empty. | 915 |
![]() | Parameter name should be final. | 916 |
![]() | Parameter aggregatorClass should be final. | 916 |
![]() | Parameter persistent should be final. | 917 |
![]() | Expected @throws tag for 'InstantiationException'. | 917 |
![]() | Expected @throws tag for 'IllegalAccessException'. | 918 |
![]() | Method 'getAggregator' is not designed for extension - needs to be abstract, final or empty. | 939 |
![]() | Parameter name should be final. | 939 |
![]() | Method 'getAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 950 |
![]() | Parameter name should be final. | 950 |
![]() | Method 'getAggregatorMap' is not designed for extension - needs to be abstract, final or empty. | 964 |
![]() | Method 'registerBspEvent' is not designed for extension - needs to be abstract, final or empty. | 975 |
![]() | Parameter event should be final. | 975 |
![]() | First sentence should end with a period. | 979 |
![]() | Method 'getGraphPartitionerFactory' is not designed for extension - needs to be abstract, final or empty. | 984 |
![]() | Method 'processEvent' is not designed for extension - needs to be abstract, final or empty. | 995 |
![]() | Parameter event should be final. | 995 |
![]() | Parameter event should be final. | 1000 |
![]() | '+' should be on a new line. | 1004 |
![]() | '+' should be on a new line. | 1005 |
![]() | '+' should be on a new line. | 1016 |
![]() | '||' should be on a new line. | 1035 |
![]() | '&&' should be on a new line. | 1036 |
![]() | '+' should be on a new line. | 1039 |
![]() | '&&' should be on a new line. | 1044 |
![]() | '+' should be on a new line. | 1047 |
![]() | '&&' should be on a new line. | 1052 |
![]() | '+' should be on a new line. | 1055 |
![]() | '&&' should be on a new line. | 1060 |
![]() | '+' should be on a new line. | 1063 |
![]() | '&&' should be on a new line. | 1068 |
![]() | '+' should be on a new line. | 1071 |
![]() | '&&' should be on a new line. | 1076 |
![]() | '+' should be on a new line. | 1079 |
![]() | '&&' should be on a new line. | 1084 |
![]() | '+' should be on a new line. | 1087 |
![]() | '&&' should be on a new line. | 1092 |
![]() | '+' should be on a new line. | 1095 |
![]() | '&&' should be on a new line. | 1100 |
![]() | '&&' should be on a new line. | 1107 |
![]() | '&&' should be on a new line. | 1114 |
![]() | '&&' should be on a new line. | 1121 |
![]() | '+' should be on a new line. | 1131 |
![]() | '+' should be on a new line. | 1132 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 93 |
![]() | First sentence should end with a period. | 95 |
![]() | First sentence should end with a period. | 97 |
![]() | First sentence should end with a period. | 99 |
![]() | First sentence should end with a period. | 101 |
![]() | First sentence should end with a period. | 103 |
![]() | First sentence should end with a period. | 105 |
![]() | First sentence should end with a period. | 107 |
![]() | First sentence should end with a period. | 109 |
![]() | First sentence should end with a period. | 111 |
![]() | First sentence should end with a period. | 113 |
![]() | First sentence should end with a period. | 117 |
![]() | First sentence should end with a period. | 119 |
![]() | First sentence should end with a period. | 121 |
![]() | First sentence should end with a period. | 123 |
![]() | First sentence should end with a period. | 125 |
![]() | First sentence should end with a period. | 127 |
![]() | First sentence should end with a period. | 129 |
![]() | First sentence should end with a period. | 131 |
![]() | First sentence should end with a period. | 133 |
![]() | First sentence should end with a period. | 135 |
![]() | First sentence should end with a period. | 137 |
![]() | First sentence should end with a period. | 140 |
![]() | First sentence should end with a period. | 142 |
![]() | First sentence should end with a period. | 144 |
![]() | First sentence should end with a period. | 146 |
![]() | First sentence should end with a period. | 148 |
![]() | Parameter serverPortList should be final. | 160 |
![]() | Parameter sessionMsecTimeout should be final. | 161 |
![]() | Parameter context should be final. | 162 |
![]() | Parameter graphMapper should be final. | 163 |
![]() | '100.0f' is a magic number. | 176 |
![]() | Method 'setJobState' is not designed for extension - needs to be abstract, final or empty. | 190 |
![]() | Parameter state should be final. | 191 |
![]() | Parameter applicationAttempt should be final. | 192 |
![]() | Parameter desiredSuperstep should be final. | 193 |
![]() | '+' should be on a new line. | 200 |
![]() | '+' should be on a new line. | 204 |
![]() | '+' should be on a new line. | 215 |
![]() | '+' should be on a new line. | 219 |
![]() | '+' should be on a new line. | 223 |
![]() | Parameter numWorkers should be final. | 243 |
![]() | '100f' is a magic number. | 254 |
![]() | '+' should be on a new line. | 256 |
![]() | '+' should be on a new line. | 257 |
![]() | '+' should be on a new line. | 262 |
![]() | Parameter workerInfosPath should be final. | 307 |
![]() | Parameter watch should be final. | 308 |
![]() | First sentence should end with a period. | 330 |
![]() | Parameter superstep should be final. | 339 |
![]() | Parameter healthyWorkerInfoList should be final. | 340 |
![]() | Parameter unhealthyWorkerInfoList should be final. | 341 |
![]() | ':' should be on a new line. | 378 |
![]() | ':' should be on a new line. | 386 |
![]() | '+' should be on a new line. | 409 |
![]() | '100.0f' is a magic number. | 411 |
![]() | '>=' should be on a new line. | 411 |
![]() | '+' should be on a new line. | 416 |
![]() | '+' should be on a new line. | 417 |
![]() | '+' should be on a new line. | 418 |
![]() | '+' should be on a new line. | 419 |
![]() | '+' should be on a new line. | 420 |
![]() | '+' should be on a new line. | 425 |
![]() | '+' should be on a new line. | 432 |
![]() | '+' should be on a new line. | 433 |
![]() | '+' should be on a new line. | 434 |
![]() | '+' should be on a new line. | 435 |
![]() | '+' should be on a new line. | 436 |
![]() | '<=' should be on a new line. | 439 |
![]() | '+' should be on a new line. | 454 |
![]() | '+' should be on a new line. | 463 |
![]() | '+' should be on a new line. | 464 |
![]() | '+' should be on a new line. | 465 |
![]() | '+' should be on a new line. | 466 |
![]() | '+' should be on a new line. | 467 |
![]() | '+' should be on a new line. | 473 |
![]() | '+' should be on a new line. | 478 |
![]() | '+' should be on a new line. | 479 |
![]() | '+' should be on a new line. | 480 |
![]() | Method 'createInputSplits' is not designed for extension - needs to be abstract, final or empty. | 486 |
![]() | '+' should be on a new line. | 494 |
![]() | '+' should be on a new line. | 502 |
![]() | '+' should be on a new line. | 526 |
![]() | '+' should be on a new line. | 527 |
![]() | '+' should be on a new line. | 528 |
![]() | '+' should be on a new line. | 529 |
![]() | Avoid inline conditionals. | 551 |
![]() | Avoid inline conditionals. | 555 |
![]() | '+' should be on a new line. | 566 |
![]() | '+' should be on a new line. | 567 |
![]() | '+' should be on a new line. | 572 |
![]() | '+' should be on a new line. | 594 |
![]() | Parameter superstep should be final. | 622 |
![]() | Parameter partitionOwners should be final. | 623 |
![]() | Expected @throws tag for 'IOException'. | 624 |
![]() | Expected @throws tag for 'KeeperException'. | 624 |
![]() | Expected @throws tag for 'InterruptedException'. | 624 |
![]() | '+' should be on a new line. | 649 |
![]() | '+' should be on a new line. | 650 |
![]() | '+' should be on a new line. | 656 |
![]() | '+' should be on a new line. | 657 |
![]() | '+' should be on a new line. | 658 |
![]() | '+' should be on a new line. | 659 |
![]() | '+' should be on a new line. | 681 |
![]() | '-' should be on a new line. | 692 |
![]() | '+' should be on a new line. | 701 |
![]() | '+' should be on a new line. | 702 |
![]() | '+' should be on a new line. | 703 |
![]() | Method 'setup' is not designed for extension - needs to be abstract, final or empty. | 712 |
![]() | Method 'becomeMaster' is not designed for extension - needs to be abstract, final or empty. | 739 |
![]() | '+' should be on a new line. | 746 |
![]() | '&&' should be on a new line. | 762 |
![]() | '==' should be on a new line. | 764 |
![]() | '+' should be on a new line. | 766 |
![]() | '+' should be on a new line. | 780 |
![]() | '+' should be on a new line. | 781 |
![]() | '-' should be on a new line. | 786 |
![]() | '+' should be on a new line. | 796 |
![]() | Parameter superstep should be final. | 836 |
![]() | '+' should be on a new line. | 892 |
![]() | Parameter superstep should be final. | 903 |
![]() | '+' should be on a new line. | 942 |
![]() | '+' should be on a new line. | 960 |
![]() | '+' should be on a new line. | 961 |
![]() | '+' should be on a new line. | 970 |
![]() | ':' should be on a new line. | 980 |
![]() | Parameter superstep should be final. | 996 |
![]() | ':' should be on a new line. | 1021 |
![]() | '+' should be on a new line. | 1028 |
![]() | '+' should be on a new line. | 1040 |
![]() | '+' should be on a new line. | 1051 |
![]() | Parameter superstep should be final. | 1068 |
![]() | Parameter chosenWorkerInfoList should be final. | 1069 |
![]() | Expected @throws tag for 'IOException'. | 1070 |
![]() | Expected @throws tag for 'KeeperException'. | 1070 |
![]() | Expected @throws tag for 'InterruptedException'. | 1070 |
![]() | '+' should be on a new line. | 1072 |
![]() | '+' should be on a new line. | 1077 |
![]() | '+' should be on a new line. | 1098 |
![]() | '-' should be on a new line. | 1115 |
![]() | Parameter allPartitionStatsList should be final. | 1130 |
![]() | 'allPartitionStatsList' hides a field. | 1130 |
![]() | Parameter chosenWorkerInfoList should be final. | 1131 |
![]() | Parameter masterGraphPartitioner should be final. | 1132 |
![]() | 'masterGraphPartitioner' hides a field. | 1132 |
![]() | '||' should be on a new line. | 1134 |
![]() | '+' should be on a new line. | 1185 |
![]() | '+' should be on a new line. | 1189 |
![]() | First sentence should end with a period. | 1205 |
![]() | Parameter chosenWorkerInfoHealthPath should be final. | 1215 |
![]() | Parameter chosenWorkerInfoList should be final. | 1216 |
![]() | Expected @throws tag for 'KeeperException'. | 1217 |
![]() | Expected @throws tag for 'InterruptedException'. | 1217 |
![]() | '+' should be on a new line. | 1226 |
![]() | '+' should be on a new line. | 1227 |
![]() | Method 'restartFromCheckpoint' is not designed for extension - needs to be abstract, final or empty. | 1234 |
![]() | Parameter checkpoint should be final. | 1235 |
![]() | First sentence should end with a period. | 1257 |
![]() | Method 'accept' is not designed for extension - needs to be abstract, final or empty. | 1261 |
![]() | Parameter path should be final. | 1262 |
![]() | Method 'getLastGoodCheckpoint' is not designed for extension - needs to be abstract, final or empty. | 1267 |
![]() | '+' should be on a new line. | 1282 |
![]() | '+' should be on a new line. | 1283 |
![]() | Parameter finishedWorkerPath should be final. | 1302 |
![]() | Parameter workerInfoList should be final. | 1303 |
![]() | Parameter event should be final. | 1304 |
![]() | '+' should be on a new line. | 1313 |
![]() | '+' should be on a new line. | 1317 |
![]() | '+' should be on a new line. | 1338 |
![]() | '+' should be on a new line. | 1342 |
![]() | '+' should be on a new line. | 1346 |
![]() | '+' should be on a new line. | 1347 |
![]() | '+' should be on a new line. | 1348 |
![]() | '+' should be on a new line. | 1349 |
![]() | '+' should be on a new line. | 1350 |
![]() | '+' should be on a new line. | 1351 |
![]() | '&&' should be on a new line. | 1355 |
![]() | '30000' is a magic number. | 1357 |
![]() | '+' should be on a new line. | 1358 |
![]() | '+' should be on a new line. | 1359 |
![]() | '+' should be on a new line. | 1360 |
![]() | '+' should be on a new line. | 1361 |
![]() | '<' should be on a new line. | 1363 |
![]() | '+' should be on a new line. | 1370 |
![]() | '+' should be on a new line. | 1371 |
![]() | '+' should be on a new line. | 1372 |
![]() | '+' should be on a new line. | 1373 |
![]() | '30' is a magic number. | 1381 |
![]() | '1000' is a magic number. | 1381 |
![]() | '&&' should be on a new line. | 1387 |
![]() | '+' should be on a new line. | 1395 |
![]() | '+' should be on a new line. | 1399 |
![]() | First sentence should end with a period. | 1407 |
![]() | Parameter removeableSuperstep should be final. | 1413 |
![]() | Expected @throws tag for 'InterruptedException'. | 1414 |
![]() | '&&' should be on a new line. | 1417 |
![]() | '+' should be on a new line. | 1420 |
![]() | '+' should be on a new line. | 1424 |
![]() | '+' should be on a new line. | 1431 |
![]() | '+' should be on a new line. | 1435 |
![]() | Method 'coordinateSuperstep' is not designed for extension - needs to be abstract, final or empty. | 1441 |
![]() | Method length is 157 lines (max allowed is 150). | 1441 |
![]() | '+' should be on a new line. | 1454 |
![]() | '+' should be on a new line. | 1461 |
![]() | '+' should be on a new line. | 1464 |
![]() | '+' should be on a new line. | 1465 |
![]() | '-' should be on a new line. | 1477 |
![]() | '+' should be on a new line. | 1511 |
![]() | '+' should be on a new line. | 1520 |
![]() | '||' should be on a new line. | 1548 |
![]() | '==' should be on a new line. | 1549 |
![]() | '&&' should be on a new line. | 1550 |
![]() | Parameter entry should be final. | 1583 |
![]() | '?' should be on a new line. | 1590 |
![]() | Avoid inline conditionals. | 1590 |
![]() | '+' should be on a new line. | 1594 |
![]() | First sentence should end with a period. | 1601 |
![]() | Parameter superstep should be final. | 1606 |
![]() | '+' should be on a new line. | 1645 |
![]() | '||' should be on a new line. | 1657 |
![]() | '==' should be on a new line. | 1658 |
![]() | '+' should be on a new line. | 1669 |
![]() | '+' should be on a new line. | 1670 |
![]() | '+' should be on a new line. | 1671 |
![]() | '+' should be on a new line. | 1678 |
![]() | '+' should be on a new line. | 1679 |
![]() | '+' should be on a new line. | 1680 |
![]() | '+' should be on a new line. | 1685 |
![]() | '+' should be on a new line. | 1690 |
![]() | '+' should be on a new line. | 1706 |
![]() | '+' should be on a new line. | 1712 |
![]() | '+' should be on a new line. | 1715 |
![]() | Method 'cleanup' is not designed for extension - needs to be abstract, final or empty. | 1720 |
![]() | '+' should be on a new line. | 1726 |
![]() | '+' should be on a new line. | 1736 |
![]() | '+' should be on a new line. | 1741 |
![]() | '+' should be on a new line. | 1759 |
![]() | '+' should be on a new line. | 1760 |
![]() | First sentence should end with a period. | 1782 |
![]() | First sentence should end with a period. | 1791 |
![]() | Parameter failedWorkerPath should be final. | 1806 |
![]() | '||' should be on a new line. | 1819 |
![]() | '&&' should be on a new line. | 1820 |
![]() | '+' should be on a new line. | 1822 |
![]() | '+' should be on a new line. | 1823 |
![]() | '+' should be on a new line. | 1824 |
![]() | '+' should be on a new line. | 1825 |
![]() | '+' should be on a new line. | 1826 |
![]() | Method 'processEvent' is not designed for extension - needs to be abstract, final or empty. | 1833 |
![]() | Parameter event should be final. | 1834 |
![]() | '&&' should be on a new line. | 1836 |
![]() | '+' should be on a new line. | 1839 |
![]() | '&&' should be on a new line. | 1845 |
![]() | '+' should be on a new line. | 1848 |
![]() | '&&' should be on a new line. | 1853 |
![]() | '+' should be on a new line. | 1856 |
![]() | Method 'registerAggregator' is not designed for extension - needs to be abstract, final or empty. | 1866 |
![]() | Parameter name should be final. | 1867 |
![]() | Parameter aggregatorClass should be final. | 1868 |
![]() | Method 'registerPersistentAggregator' is not designed for extension - needs to be abstract, final or empty. | 1873 |
![]() | Parameter name should be final. | 1874 |
![]() | Parameter aggregatorClass should be final. | 1875 |
![]() | Method 'setAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 1880 |
![]() | Parameter name should be final. | 1881 |
![]() | Parameter value should be final. | 1881 |
![]() | '+' should be on a new line. | 1885 |
![]() | First sentence should end with a period. | 1891 |
![]() | Parameter globalStats should be final. | 1896 |
![]() | '-' should be on a new line. | 1898 |
![]() | '-' should be on a new line. | 1901 |
![]() | '-' should be on a new line. | 1904 |
![]() | '-' should be on a new line. | 1907 |
![]() | First sentence should end with a period. | 93 |
![]() | First sentence should end with a period. | 95 |
![]() | First sentence should end with a period. | 97 |
![]() | First sentence should end with a period. | 99 |
![]() | First sentence should end with a period. | 101 |
![]() | First sentence should end with a period. | 103 |
![]() | First sentence should end with a period. | 105 |
![]() | First sentence should end with a period. | 107 |
![]() | First sentence should end with a period. | 109 |
![]() | First sentence should end with a period. | 111 |
![]() | First sentence should end with a period. | 113 |
![]() | First sentence should end with a period. | 117 |
![]() | First sentence should end with a period. | 119 |
![]() | First sentence should end with a period. | 121 |
![]() | First sentence should end with a period. | 123 |
![]() | First sentence should end with a period. | 125 |
![]() | First sentence should end with a period. | 127 |
![]() | First sentence should end with a period. | 129 |
![]() | First sentence should end with a period. | 131 |
![]() | First sentence should end with a period. | 133 |
![]() | First sentence should end with a period. | 135 |
![]() | First sentence should end with a period. | 137 |
![]() | First sentence should end with a period. | 140 |
![]() | First sentence should end with a period. | 142 |
![]() | First sentence should end with a period. | 144 |
![]() | First sentence should end with a period. | 146 |
![]() | First sentence should end with a period. | 148 |
![]() | Parameter serverPortList should be final. | 160 |
![]() | Parameter sessionMsecTimeout should be final. | 161 |
![]() | Parameter context should be final. | 162 |
![]() | Parameter graphMapper should be final. | 163 |
![]() | '100.0f' is a magic number. | 176 |
![]() | Method 'setJobState' is not designed for extension - needs to be abstract, final or empty. | 190 |
![]() | Parameter state should be final. | 191 |
![]() | Parameter applicationAttempt should be final. | 192 |
![]() | Parameter desiredSuperstep should be final. | 193 |
![]() | '+' should be on a new line. | 200 |
![]() | '+' should be on a new line. | 204 |
![]() | '+' should be on a new line. | 215 |
![]() | '+' should be on a new line. | 219 |
![]() | '+' should be on a new line. | 223 |
![]() | Parameter numWorkers should be final. | 243 |
![]() | '100f' is a magic number. | 254 |
![]() | '+' should be on a new line. | 256 |
![]() | '+' should be on a new line. | 257 |
![]() | '+' should be on a new line. | 262 |
![]() | Parameter workerInfosPath should be final. | 307 |
![]() | Parameter watch should be final. | 308 |
![]() | First sentence should end with a period. | 330 |
![]() | Parameter superstep should be final. | 339 |
![]() | Parameter healthyWorkerInfoList should be final. | 340 |
![]() | Parameter unhealthyWorkerInfoList should be final. | 341 |
![]() | ':' should be on a new line. | 378 |
![]() | ':' should be on a new line. | 386 |
![]() | '+' should be on a new line. | 409 |
![]() | '100.0f' is a magic number. | 411 |
![]() | '>=' should be on a new line. | 411 |
![]() | '+' should be on a new line. | 416 |
![]() | '+' should be on a new line. | 417 |
![]() | '+' should be on a new line. | 418 |
![]() | '+' should be on a new line. | 419 |
![]() | '+' should be on a new line. | 420 |
![]() | '+' should be on a new line. | 425 |
![]() | '+' should be on a new line. | 432 |
![]() | '+' should be on a new line. | 433 |
![]() | '+' should be on a new line. | 434 |
![]() | '+' should be on a new line. | 435 |
![]() | '+' should be on a new line. | 436 |
![]() | '<=' should be on a new line. | 439 |
![]() | '+' should be on a new line. | 454 |
![]() | '+' should be on a new line. | 463 |
![]() | '+' should be on a new line. | 464 |
![]() | '+' should be on a new line. | 465 |
![]() | '+' should be on a new line. | 466 |
![]() | '+' should be on a new line. | 467 |
![]() | '+' should be on a new line. | 473 |
![]() | '+' should be on a new line. | 478 |
![]() | '+' should be on a new line. | 479 |
![]() | '+' should be on a new line. | 480 |
![]() | Method 'createInputSplits' is not designed for extension - needs to be abstract, final or empty. | 486 |
![]() | '+' should be on a new line. | 494 |
![]() | '+' should be on a new line. | 502 |
![]() | '+' should be on a new line. | 526 |
![]() | '+' should be on a new line. | 527 |
![]() | '+' should be on a new line. | 528 |
![]() | '+' should be on a new line. | 529 |
![]() | Avoid inline conditionals. | 551 |
![]() | Avoid inline conditionals. | 555 |
![]() | '+' should be on a new line. | 566 |
![]() | '+' should be on a new line. | 567 |
![]() | '+' should be on a new line. | 572 |
![]() | '+' should be on a new line. | 594 |
![]() | Parameter superstep should be final. | 622 |
![]() | Parameter partitionOwners should be final. | 623 |
![]() | Expected @throws tag for 'IOException'. | 624 |
![]() | Expected @throws tag for 'KeeperException'. | 624 |
![]() | Expected @throws tag for 'InterruptedException'. | 624 |
![]() | '+' should be on a new line. | 649 |
![]() | '+' should be on a new line. | 650 |
![]() | '+' should be on a new line. | 656 |
![]() | '+' should be on a new line. | 657 |
![]() | '+' should be on a new line. | 658 |
![]() | '+' should be on a new line. | 659 |
![]() | '+' should be on a new line. | 681 |
![]() | '-' should be on a new line. | 692 |
![]() | '+' should be on a new line. | 701 |
![]() | '+' should be on a new line. | 702 |
![]() | '+' should be on a new line. | 703 |
![]() | Method 'setup' is not designed for extension - needs to be abstract, final or empty. | 712 |
![]() | Method 'becomeMaster' is not designed for extension - needs to be abstract, final or empty. | 739 |
![]() | '+' should be on a new line. | 746 |
![]() | '&&' should be on a new line. | 762 |
![]() | '==' should be on a new line. | 764 |
![]() | '+' should be on a new line. | 766 |
![]() | '+' should be on a new line. | 780 |
![]() | '+' should be on a new line. | 781 |
![]() | '-' should be on a new line. | 786 |
![]() | '+' should be on a new line. | 796 |
![]() | Parameter superstep should be final. | 836 |
![]() | '+' should be on a new line. | 892 |
![]() | Parameter superstep should be final. | 903 |
![]() | '+' should be on a new line. | 942 |
![]() | '+' should be on a new line. | 960 |
![]() | '+' should be on a new line. | 961 |
![]() | '+' should be on a new line. | 970 |
![]() | ':' should be on a new line. | 980 |
![]() | Parameter superstep should be final. | 996 |
![]() | ':' should be on a new line. | 1021 |
![]() | '+' should be on a new line. | 1028 |
![]() | '+' should be on a new line. | 1040 |
![]() | '+' should be on a new line. | 1051 |
![]() | Parameter superstep should be final. | 1068 |
![]() | Parameter chosenWorkerInfoList should be final. | 1069 |
![]() | Expected @throws tag for 'IOException'. | 1070 |
![]() | Expected @throws tag for 'KeeperException'. | 1070 |
![]() | Expected @throws tag for 'InterruptedException'. | 1070 |
![]() | '+' should be on a new line. | 1072 |
![]() | '+' should be on a new line. | 1077 |
![]() | '+' should be on a new line. | 1098 |
![]() | '-' should be on a new line. | 1115 |
![]() | Parameter allPartitionStatsList should be final. | 1130 |
![]() | 'allPartitionStatsList' hides a field. | 1130 |
![]() | Parameter chosenWorkerInfoList should be final. | 1131 |
![]() | Parameter masterGraphPartitioner should be final. | 1132 |
![]() | 'masterGraphPartitioner' hides a field. | 1132 |
![]() | '||' should be on a new line. | 1134 |
![]() | '+' should be on a new line. | 1185 |
![]() | '+' should be on a new line. | 1189 |
![]() | First sentence should end with a period. | 1205 |
![]() | Parameter chosenWorkerInfoHealthPath should be final. | 1215 |
![]() | Parameter chosenWorkerInfoList should be final. | 1216 |
![]() | Expected @throws tag for 'KeeperException'. | 1217 |
![]() | Expected @throws tag for 'InterruptedException'. | 1217 |
![]() | '+' should be on a new line. | 1226 |
![]() | '+' should be on a new line. | 1227 |
![]() | Method 'restartFromCheckpoint' is not designed for extension - needs to be abstract, final or empty. | 1234 |
![]() | Parameter checkpoint should be final. | 1235 |
![]() | First sentence should end with a period. | 1257 |
![]() | Method 'accept' is not designed for extension - needs to be abstract, final or empty. | 1261 |
![]() | Parameter path should be final. | 1262 |
![]() | Method 'getLastGoodCheckpoint' is not designed for extension - needs to be abstract, final or empty. | 1267 |
![]() | '+' should be on a new line. | 1282 |
![]() | '+' should be on a new line. | 1283 |
![]() | Parameter finishedWorkerPath should be final. | 1302 |
![]() | Parameter workerInfoList should be final. | 1303 |
![]() | Parameter event should be final. | 1304 |
![]() | '+' should be on a new line. | 1313 |
![]() | '+' should be on a new line. | 1317 |
![]() | '+' should be on a new line. | 1338 |
![]() | '+' should be on a new line. | 1342 |
![]() | '+' should be on a new line. | 1346 |
![]() | '+' should be on a new line. | 1347 |
![]() | '+' should be on a new line. | 1348 |
![]() | '+' should be on a new line. | 1349 |
![]() | '+' should be on a new line. | 1350 |
![]() | '+' should be on a new line. | 1351 |
![]() | '&&' should be on a new line. | 1355 |
![]() | '30000' is a magic number. | 1357 |
![]() | '+' should be on a new line. | 1358 |
![]() | '+' should be on a new line. | 1359 |
![]() | '+' should be on a new line. | 1360 |
![]() | '+' should be on a new line. | 1361 |
![]() | '<' should be on a new line. | 1363 |
![]() | '+' should be on a new line. | 1370 |
![]() | '+' should be on a new line. | 1371 |
![]() | '+' should be on a new line. | 1372 |
![]() | '+' should be on a new line. | 1373 |
![]() | '30' is a magic number. | 1381 |
![]() | '1000' is a magic number. | 1381 |
![]() | '&&' should be on a new line. | 1387 |
![]() | '+' should be on a new line. | 1395 |
![]() | '+' should be on a new line. | 1399 |
![]() | First sentence should end with a period. | 1407 |
![]() | Parameter removeableSuperstep should be final. | 1413 |
![]() | Expected @throws tag for 'InterruptedException'. | 1414 |
![]() | '&&' should be on a new line. | 1417 |
![]() | '+' should be on a new line. | 1420 |
![]() | '+' should be on a new line. | 1424 |
![]() | '+' should be on a new line. | 1431 |
![]() | '+' should be on a new line. | 1435 |
![]() | Method 'coordinateSuperstep' is not designed for extension - needs to be abstract, final or empty. | 1441 |
![]() | Method length is 157 lines (max allowed is 150). | 1441 |
![]() | '+' should be on a new line. | 1454 |
![]() | '+' should be on a new line. | 1461 |
![]() | '+' should be on a new line. | 1464 |
![]() | '+' should be on a new line. | 1465 |
![]() | '-' should be on a new line. | 1477 |
![]() | '+' should be on a new line. | 1511 |
![]() | '+' should be on a new line. | 1520 |
![]() | '||' should be on a new line. | 1548 |
![]() | '==' should be on a new line. | 1549 |
![]() | '&&' should be on a new line. | 1550 |
![]() | Parameter entry should be final. | 1583 |
![]() | '?' should be on a new line. | 1590 |
![]() | Avoid inline conditionals. | 1590 |
![]() | '+' should be on a new line. | 1594 |
![]() | First sentence should end with a period. | 1601 |
![]() | Parameter superstep should be final. | 1606 |
![]() | '+' should be on a new line. | 1645 |
![]() | '||' should be on a new line. | 1657 |
![]() | '==' should be on a new line. | 1658 |
![]() | '+' should be on a new line. | 1669 |
![]() | '+' should be on a new line. | 1670 |
![]() | '+' should be on a new line. | 1671 |
![]() | '+' should be on a new line. | 1678 |
![]() | '+' should be on a new line. | 1679 |
![]() | '+' should be on a new line. | 1680 |
![]() | '+' should be on a new line. | 1685 |
![]() | '+' should be on a new line. | 1690 |
![]() | '+' should be on a new line. | 1706 |
![]() | '+' should be on a new line. | 1712 |
![]() | '+' should be on a new line. | 1715 |
![]() | Method 'cleanup' is not designed for extension - needs to be abstract, final or empty. | 1720 |
![]() | '+' should be on a new line. | 1726 |
![]() | '+' should be on a new line. | 1736 |
![]() | '+' should be on a new line. | 1741 |
![]() | '+' should be on a new line. | 1759 |
![]() | '+' should be on a new line. | 1760 |
![]() | First sentence should end with a period. | 1782 |
![]() | First sentence should end with a period. | 1791 |
![]() | Parameter failedWorkerPath should be final. | 1806 |
![]() | '||' should be on a new line. | 1819 |
![]() | '&&' should be on a new line. | 1820 |
![]() | '+' should be on a new line. | 1822 |
![]() | '+' should be on a new line. | 1823 |
![]() | '+' should be on a new line. | 1824 |
![]() | '+' should be on a new line. | 1825 |
![]() | '+' should be on a new line. | 1826 |
![]() | Method 'processEvent' is not designed for extension - needs to be abstract, final or empty. | 1833 |
![]() | Parameter event should be final. | 1834 |
![]() | '&&' should be on a new line. | 1836 |
![]() | '+' should be on a new line. | 1839 |
![]() | '&&' should be on a new line. | 1845 |
![]() | '+' should be on a new line. | 1848 |
![]() | '&&' should be on a new line. | 1853 |
![]() | '+' should be on a new line. | 1856 |
![]() | Method 'registerAggregator' is not designed for extension - needs to be abstract, final or empty. | 1866 |
![]() | Parameter name should be final. | 1867 |
![]() | Parameter aggregatorClass should be final. | 1868 |
![]() | Method 'registerPersistentAggregator' is not designed for extension - needs to be abstract, final or empty. | 1873 |
![]() | Parameter name should be final. | 1874 |
![]() | Parameter aggregatorClass should be final. | 1875 |
![]() | Method 'setAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 1880 |
![]() | Parameter name should be final. | 1881 |
![]() | Parameter value should be final. | 1881 |
![]() | '+' should be on a new line. | 1885 |
![]() | First sentence should end with a period. | 1891 |
![]() | Parameter globalStats should be final. | 1896 |
![]() | '-' should be on a new line. | 1898 |
![]() | '-' should be on a new line. | 1901 |
![]() | '-' should be on a new line. | 1904 |
![]() | '-' should be on a new line. | 1907 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 89 |
![]() | First sentence should end with a period. | 91 |
![]() | First sentence should end with a period. | 93 |
![]() | First sentence should end with a period. | 95 |
![]() | First sentence should end with a period. | 97 |
![]() | First sentence should end with a period. | 99 |
![]() | First sentence should end with a period. | 102 |
![]() | First sentence should end with a period. | 104 |
![]() | First sentence should end with a period. | 113 |
![]() | First sentence should end with a period. | 115 |
![]() | First sentence should end with a period. | 117 |
![]() | First sentence should end with a period. | 119 |
![]() | Parameter serverPortList should be final. | 138 |
![]() | Parameter sessionMsecTimeout should be final. | 139 |
![]() | Parameter context should be final. | 140 |
![]() | Parameter graphMapper should be final. | 141 |
![]() | Parameter graphState should be final. | 142 |
![]() | Expected @throws tag for 'IOException'. | 143 |
![]() | Expected @throws tag for 'InterruptedException'. | 143 |
![]() | '+' should be on a new line. | 164 |
![]() | '+' should be on a new line. | 166 |
![]() | '+' should be on a new line. | 167 |
![]() | Method 'getWorkerContext' is not designed for extension - needs to be abstract, final or empty. | 187 |
![]() | Missing a Javadoc comment. | 187 |
![]() | Comment matches to-do format 'TODO:'. | 194 |
![]() | Method 'isHealthy' is not designed for extension - needs to be abstract, final or empty. | 199 |
![]() | Expected @throws tag for 'KeeperException'. | 221 |
![]() | Expected @throws tag for 'InterruptedException'. | 221 |
![]() | '100.0f' is a magic number. | 252 |
![]() | '/' should be on a new line. | 252 |
![]() | '+' should be on a new line. | 254 |
![]() | '+' should be on a new line. | 255 |
![]() | '+' should be on a new line. | 256 |
![]() | '+' is followed by whitespace. | 257 |
![]() | '+' should be on a new line. | 257 |
![]() | '+' should be on a new line. | 262 |
![]() | '+' should be on a new line. | 263 |
![]() | '+' should be on a new line. | 270 |
![]() | '+' should be on a new line. | 278 |
![]() | '+' should be on a new line. | 279 |
![]() | '+' should be on a new line. | 280 |
![]() | '60' is a magic number. | 290 |
![]() | '1000' is a magic number. | 290 |
![]() | Expected @throws tag for 'IOException'. | 312 |
![]() | Expected @throws tag for 'ClassNotFoundException'. | 313 |
![]() | Expected @throws tag for 'InterruptedException'. | 313 |
![]() | Expected @throws tag for 'InstantiationException'. | 313 |
![]() | Expected @throws tag for 'IllegalAccessException'. | 314 |
![]() | Expected @throws tag for 'KeeperException'. | 314 |
![]() | ':' should be on a new line. | 323 |
![]() | Parameter inputSplitPath should be final. | 344 |
![]() | '+' should be on a new line. | 354 |
![]() | '+' should be on a new line. | 358 |
![]() | '+' should be on a new line. | 362 |
![]() | Parameter inputSplitPath should be final. | 381 |
![]() | Expected @throws tag for 'IOException'. | 382 |
![]() | Expected @throws tag for 'ClassNotFoundException'. | 382 |
![]() | Expected @throws tag for 'InterruptedException'. | 382 |
![]() | Expected @throws tag for 'InstantiationException'. | 383 |
![]() | Expected @throws tag for 'IllegalAccessException'. | 383 |
![]() | '+' should be on a new line. | 388 |
![]() | Parameter inputSplitPath should be final. | 404 |
![]() | Expected @throws tag for 'IOException'. | 405 |
![]() | Expected @throws tag for 'ClassNotFoundException'. | 405 |
![]() | '+' should be on a new line. | 429 |
![]() | '+' should be on a new line. | 430 |
![]() | Parameter inputSplit should be final. | 446 |
![]() | Expected @throws tag for 'IOException'. | 446 |
![]() | Expected @throws tag for 'InterruptedException'. | 446 |
![]() | '+' should be on a new line. | 458 |
![]() | '+' should be on a new line. | 479 |
![]() | '250000' is a magic number. | 493 |
![]() | '+' should be on a new line. | 494 |
![]() | '+' should be on a new line. | 495 |
![]() | '+' should be on a new line. | 496 |
![]() | '+' should be on a new line. | 497 |
![]() | '+' should be on a new line. | 498 |
![]() | '+' should be on a new line. | 499 |
![]() | '&&' should be on a new line. | 509 |
![]() | '>=' should be on a new line. | 510 |
![]() | '+' should be on a new line. | 513 |
![]() | '+' should be on a new line. | 514 |
![]() | Method 'assignMessagesToVertex' is not designed for extension - needs to be abstract, final or empty. | 526 |
![]() | Parameter vertex should be final. | 527 |
![]() | Parameter messages should be final. | 528 |
![]() | Method 'getMasterInfo' is not designed for extension - needs to be abstract, final or empty. | 532 |
![]() | Method 'setup' is not designed for extension - needs to be abstract, final or empty. | 537 |
![]() | Method length is 158 lines (max allowed is 150). | 537 |
![]() | '==' should be on a new line. | 553 |
![]() | '&&' should be on a new line. | 554 |
![]() | '==' should be on a new line. | 555 |
![]() | '+' should be on a new line. | 558 |
![]() | '+' should be on a new line. | 559 |
![]() | '+' should be on a new line. | 560 |
![]() | '+' should be on a new line. | 568 |
![]() | '+' should be on a new line. | 606 |
![]() | '+' should be on a new line. | 610 |
![]() | '+' should be on a new line. | 613 |
![]() | '+' should be on a new line. | 616 |
![]() | '+' should be on a new line. | 619 |
![]() | '+' should be on a new line. | 622 |
![]() | '+' should be on a new line. | 625 |
![]() | '+' should be on a new line. | 656 |
![]() | '&&' should be on a new line. | 668 |
![]() | ':' should be on a new line. | 682 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 697 |
![]() | Parameter name should be final. | 698 |
![]() | Parameter value should be final. | 698 |
![]() | '+' should be on a new line. | 703 |
![]() | Parameter superstep should be final. | 715 |
![]() | ':' should be on a new line. | 722 |
![]() | '+' should be on a new line. | 729 |
![]() | Parameter superstep should be final. | 747 |
![]() | ':' should be on a new line. | 749 |
![]() | '+' should be on a new line. | 761 |
![]() | '+' should be on a new line. | 765 |
![]() | '+' should be on a new line. | 768 |
![]() | '+' should be on a new line. | 779 |
![]() | '+' should be on a new line. | 797 |
![]() | '+' should be on a new line. | 798 |
![]() | '+' should be on a new line. | 801 |
![]() | '+' should be on a new line. | 802 |
![]() | '+' should be on a new line. | 805 |
![]() | '+' should be on a new line. | 806 |
![]() | '+' should be on a new line. | 820 |
![]() | First sentence should end with a period. | 825 |
![]() | Parameter superstep should be final. | 830 |
![]() | '+' should be on a new line. | 853 |
![]() | '+' should be on a new line. | 854 |
![]() | '+' should be on a new line. | 855 |
![]() | '+' should be on a new line. | 859 |
![]() | '+' should be on a new line. | 863 |
![]() | '+' should be on a new line. | 866 |
![]() | '+' should be on a new line. | 869 |
![]() | '+' should be on a new line. | 873 |
![]() | '+' should be on a new line. | 874 |
![]() | '+' should be on a new line. | 875 |
![]() | '+' should be on a new line. | 884 |
![]() | '+' should be on a new line. | 890 |
![]() | '+' should be on a new line. | 894 |
![]() | Method 'failureCleanup' is not designed for extension - needs to be abstract, final or empty. | 899 |
![]() | Method 'startSuperstep' is not designed for extension - needs to be abstract, final or empty. | 904 |
![]() | '==' should be on a new line. | 923 |
![]() | '+' should be on a new line. | 959 |
![]() | '+' should be on a new line. | 960 |
![]() | '+' should be on a new line. | 961 |
![]() | '+' should be on a new line. | 968 |
![]() | '+' should be on a new line. | 969 |
![]() | '+' should be on a new line. | 970 |
![]() | Method 'finishSuperstep' is not designed for extension - needs to be abstract, final or empty. | 975 |
![]() | Parameter partitionStatsList should be final. | 976 |
![]() | '+' should be on a new line. | 990 |
![]() | '+' should be on a new line. | 991 |
![]() | '+' should be on a new line. | 992 |
![]() | '+' should be on a new line. | 1010 |
![]() | '+' should be on a new line. | 1011 |
![]() | '+' should be on a new line. | 1036 |
![]() | '+' should be on a new line. | 1045 |
![]() | '+' should be on a new line. | 1048 |
![]() | '+' should be on a new line. | 1051 |
![]() | '+' should be on a new line. | 1054 |
![]() | '+' should be on a new line. | 1055 |
![]() | '+' should be on a new line. | 1056 |
![]() | '+' should be on a new line. | 1057 |
![]() | '+' should be on a new line. | 1069 |
![]() | '+' should be on a new line. | 1073 |
![]() | '+' should be on a new line. | 1080 |
![]() | '+' should be on a new line. | 1084 |
![]() | '+' should be on a new line. | 1085 |
![]() | '+' should be on a new line. | 1086 |
![]() | Expected @throws tag for 'IOException'. | 1099 |
![]() | Expected @throws tag for 'InterruptedException'. | 1099 |
![]() | '==' should be on a new line. | 1100 |
![]() | '+' should be on a new line. | 1102 |
![]() | ':' should be on a new line. | 1112 |
![]() | Method 'cleanup' is not designed for extension - needs to be abstract, final or empty. | 1121 |
![]() | '+' should be on a new line. | 1130 |
![]() | '+' should be on a new line. | 1140 |
![]() | '+' should be on a new line. | 1145 |
![]() | '+' should be on a new line. | 1150 |
![]() | '+' should be on a new line. | 1154 |
![]() | Method 'storeCheckpoint' is not designed for extension - needs to be abstract, final or empty. | 1170 |
![]() | '+' should be on a new line. | 1172 |
![]() | '+' should be on a new line. | 1173 |
![]() | '+' should be on a new line. | 1174 |
![]() | '+' should be on a new line. | 1180 |
![]() | '+' should be on a new line. | 1181 |
![]() | '+' should be on a new line. | 1184 |
![]() | '+' should be on a new line. | 1185 |
![]() | '+' should be on a new line. | 1188 |
![]() | '+' should be on a new line. | 1189 |
![]() | '+' should be on a new line. | 1195 |
![]() | '+' should be on a new line. | 1199 |
![]() | ':' should be on a new line. | 1212 |
![]() | '+' should be on a new line. | 1230 |
![]() | '+' should be on a new line. | 1231 |
![]() | '+' should be on a new line. | 1232 |
![]() | '+' should be on a new line. | 1245 |
![]() | '+' should be on a new line. | 1262 |
![]() | '+' should be on a new line. | 1265 |
![]() | '+' should be on a new line. | 1268 |
![]() | Method 'loadCheckpoint' is not designed for extension - needs to be abstract, final or empty. | 1273 |
![]() | Parameter superstep should be final. | 1274 |
![]() | ':' should be on a new line. | 1293 |
![]() | '+' should be on a new line. | 1297 |
![]() | '+' should be on a new line. | 1300 |
![]() | '+' should be on a new line. | 1316 |
![]() | '+' should be on a new line. | 1328 |
![]() | '+' should be on a new line. | 1338 |
![]() | '+' should be on a new line. | 1343 |
![]() | '+' should be on a new line. | 1350 |
![]() | '+' should be on a new line. | 1356 |
![]() | '+' should be on a new line. | 1357 |
![]() | '+' should be on a new line. | 1358 |
![]() | First sentence should end with a period. | 1383 |
![]() | Parameter workerPartitionMap should be final. | 1390 |
![]() | ':' should be on a new line. | 1395 |
![]() | '+' should be on a new line. | 1402 |
![]() | '+' should be on a new line. | 1403 |
![]() | '+' should be on a new line. | 1407 |
![]() | '+' should be on a new line. | 1408 |
![]() | '+' should be on a new line. | 1433 |
![]() | '+' should be on a new line. | 1437 |
![]() | Parameter masterSetPartitionOwners should be final. | 1447 |
![]() | '+' should be on a new line. | 1476 |
![]() | '+' should be on a new line. | 1494 |
![]() | Method 'processEvent' is not designed for extension - needs to be abstract, final or empty. | 1520 |
![]() | Parameter event should be final. | 1521 |
![]() | '&&' should be on a new line. | 1523 |
![]() | '+' should be on a new line. | 1526 |
![]() | '==' should be on a new line. | 1531 |
![]() | '&&' should be on a new line. | 1532 |
![]() | '!=' should be on a new line. | 1533 |
![]() | '+' should be on a new line. | 1535 |
![]() | '+' should be on a new line. | 1541 |
![]() | '&&' should be on a new line. | 1545 |
![]() | '+' should be on a new line. | 1548 |
![]() | Method 'getWorkerInfo' is not designed for extension - needs to be abstract, final or empty. | 1558 |
![]() | Method 'getPartitionStore' is not designed for extension - needs to be abstract, final or empty. | 1563 |
![]() | Method 'getPartitionOwners' is not designed for extension - needs to be abstract, final or empty. | 1572 |
![]() | Method 'getVertexPartitionOwner' is not designed for extension - needs to be abstract, final or empty. | 1577 |
![]() | Parameter vertexId should be final. | 1578 |
![]() | Method 'getPartition' is not designed for extension - needs to be abstract, final or empty. | 1582 |
![]() | Parameter vertexId should be final. | 1583 |
![]() | Method 'getPartitionId' is not designed for extension - needs to be abstract, final or empty. | 1587 |
![]() | Parameter vertexId should be final. | 1588 |
![]() | Method 'hasPartition' is not designed for extension - needs to be abstract, final or empty. | 1593 |
![]() | Parameter partitionId should be final. | 1594 |
![]() | Method 'getVertex' is not designed for extension - needs to be abstract, final or empty. | 1598 |
![]() | Parameter vertexId should be final. | 1599 |
![]() | Method 'getServerData' is not designed for extension - needs to be abstract, final or empty. | 1609 |
![]() | First sentence should end with a period. | 89 |
![]() | First sentence should end with a period. | 91 |
![]() | First sentence should end with a period. | 93 |
![]() | First sentence should end with a period. | 95 |
![]() | First sentence should end with a period. | 97 |
![]() | First sentence should end with a period. | 99 |
![]() | First sentence should end with a period. | 102 |
![]() | First sentence should end with a period. | 104 |
![]() | First sentence should end with a period. | 113 |
![]() | First sentence should end with a period. | 115 |
![]() | First sentence should end with a period. | 117 |
![]() | First sentence should end with a period. | 119 |
![]() | Parameter serverPortList should be final. | 138 |
![]() | Parameter sessionMsecTimeout should be final. | 139 |
![]() | Parameter context should be final. | 140 |
![]() | Parameter graphMapper should be final. | 141 |
![]() | Parameter graphState should be final. | 142 |
![]() | Expected @throws tag for 'IOException'. | 143 |
![]() | Expected @throws tag for 'InterruptedException'. | 143 |
![]() | '+' should be on a new line. | 164 |
![]() | '+' should be on a new line. | 166 |
![]() | '+' should be on a new line. | 167 |
![]() | Method 'getWorkerContext' is not designed for extension - needs to be abstract, final or empty. | 187 |
![]() | Missing a Javadoc comment. | 187 |
![]() | Comment matches to-do format 'TODO:'. | 194 |
![]() | Method 'isHealthy' is not designed for extension - needs to be abstract, final or empty. | 199 |
![]() | Expected @throws tag for 'KeeperException'. | 221 |
![]() | Expected @throws tag for 'InterruptedException'. | 221 |
![]() | '100.0f' is a magic number. | 252 |
![]() | '/' should be on a new line. | 252 |
![]() | '+' should be on a new line. | 254 |
![]() | '+' should be on a new line. | 255 |
![]() | '+' should be on a new line. | 256 |
![]() | '+' is followed by whitespace. | 257 |
![]() | '+' should be on a new line. | 257 |
![]() | '+' should be on a new line. | 262 |
![]() | '+' should be on a new line. | 263 |
![]() | '+' should be on a new line. | 270 |
![]() | '+' should be on a new line. | 278 |
![]() | '+' should be on a new line. | 279 |
![]() | '+' should be on a new line. | 280 |
![]() | '60' is a magic number. | 290 |
![]() | '1000' is a magic number. | 290 |
![]() | Expected @throws tag for 'IOException'. | 312 |
![]() | Expected @throws tag for 'ClassNotFoundException'. | 313 |
![]() | Expected @throws tag for 'InterruptedException'. | 313 |
![]() | Expected @throws tag for 'InstantiationException'. | 313 |
![]() | Expected @throws tag for 'IllegalAccessException'. | 314 |
![]() | Expected @throws tag for 'KeeperException'. | 314 |
![]() | ':' should be on a new line. | 323 |
![]() | Parameter inputSplitPath should be final. | 344 |
![]() | '+' should be on a new line. | 354 |
![]() | '+' should be on a new line. | 358 |
![]() | '+' should be on a new line. | 362 |
![]() | Parameter inputSplitPath should be final. | 381 |
![]() | Expected @throws tag for 'IOException'. | 382 |
![]() | Expected @throws tag for 'ClassNotFoundException'. | 382 |
![]() | Expected @throws tag for 'InterruptedException'. | 382 |
![]() | Expected @throws tag for 'InstantiationException'. | 383 |
![]() | Expected @throws tag for 'IllegalAccessException'. | 383 |
![]() | '+' should be on a new line. | 388 |
![]() | Parameter inputSplitPath should be final. | 404 |
![]() | Expected @throws tag for 'IOException'. | 405 |
![]() | Expected @throws tag for 'ClassNotFoundException'. | 405 |
![]() | '+' should be on a new line. | 429 |
![]() | '+' should be on a new line. | 430 |
![]() | Parameter inputSplit should be final. | 446 |
![]() | Expected @throws tag for 'IOException'. | 446 |
![]() | Expected @throws tag for 'InterruptedException'. | 446 |
![]() | '+' should be on a new line. | 458 |
![]() | '+' should be on a new line. | 479 |
![]() | '250000' is a magic number. | 493 |
![]() | '+' should be on a new line. | 494 |
![]() | '+' should be on a new line. | 495 |
![]() | '+' should be on a new line. | 496 |
![]() | '+' should be on a new line. | 497 |
![]() | '+' should be on a new line. | 498 |
![]() | '+' should be on a new line. | 499 |
![]() | '&&' should be on a new line. | 509 |
![]() | '>=' should be on a new line. | 510 |
![]() | '+' should be on a new line. | 513 |
![]() | '+' should be on a new line. | 514 |
![]() | Method 'assignMessagesToVertex' is not designed for extension - needs to be abstract, final or empty. | 526 |
![]() | Parameter vertex should be final. | 527 |
![]() | Parameter messages should be final. | 528 |
![]() | Method 'getMasterInfo' is not designed for extension - needs to be abstract, final or empty. | 532 |
![]() | Method 'setup' is not designed for extension - needs to be abstract, final or empty. | 537 |
![]() | Method length is 158 lines (max allowed is 150). | 537 |
![]() | '==' should be on a new line. | 553 |
![]() | '&&' should be on a new line. | 554 |
![]() | '==' should be on a new line. | 555 |
![]() | '+' should be on a new line. | 558 |
![]() | '+' should be on a new line. | 559 |
![]() | '+' should be on a new line. | 560 |
![]() | '+' should be on a new line. | 568 |
![]() | '+' should be on a new line. | 606 |
![]() | '+' should be on a new line. | 610 |
![]() | '+' should be on a new line. | 613 |
![]() | '+' should be on a new line. | 616 |
![]() | '+' should be on a new line. | 619 |
![]() | '+' should be on a new line. | 622 |
![]() | '+' should be on a new line. | 625 |
![]() | '+' should be on a new line. | 656 |
![]() | '&&' should be on a new line. | 668 |
![]() | ':' should be on a new line. | 682 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 697 |
![]() | Parameter name should be final. | 698 |
![]() | Parameter value should be final. | 698 |
![]() | '+' should be on a new line. | 703 |
![]() | Parameter superstep should be final. | 715 |
![]() | ':' should be on a new line. | 722 |
![]() | '+' should be on a new line. | 729 |
![]() | Parameter superstep should be final. | 747 |
![]() | ':' should be on a new line. | 749 |
![]() | '+' should be on a new line. | 761 |
![]() | '+' should be on a new line. | 765 |
![]() | '+' should be on a new line. | 768 |
![]() | '+' should be on a new line. | 779 |
![]() | '+' should be on a new line. | 797 |
![]() | '+' should be on a new line. | 798 |
![]() | '+' should be on a new line. | 801 |
![]() | '+' should be on a new line. | 802 |
![]() | '+' should be on a new line. | 805 |
![]() | '+' should be on a new line. | 806 |
![]() | '+' should be on a new line. | 820 |
![]() | First sentence should end with a period. | 825 |
![]() | Parameter superstep should be final. | 830 |
![]() | '+' should be on a new line. | 853 |
![]() | '+' should be on a new line. | 854 |
![]() | '+' should be on a new line. | 855 |
![]() | '+' should be on a new line. | 859 |
![]() | '+' should be on a new line. | 863 |
![]() | '+' should be on a new line. | 866 |
![]() | '+' should be on a new line. | 869 |
![]() | '+' should be on a new line. | 873 |
![]() | '+' should be on a new line. | 874 |
![]() | '+' should be on a new line. | 875 |
![]() | '+' should be on a new line. | 884 |
![]() | '+' should be on a new line. | 890 |
![]() | '+' should be on a new line. | 894 |
![]() | Method 'failureCleanup' is not designed for extension - needs to be abstract, final or empty. | 899 |
![]() | Method 'startSuperstep' is not designed for extension - needs to be abstract, final or empty. | 904 |
![]() | '==' should be on a new line. | 923 |
![]() | '+' should be on a new line. | 959 |
![]() | '+' should be on a new line. | 960 |
![]() | '+' should be on a new line. | 961 |
![]() | '+' should be on a new line. | 968 |
![]() | '+' should be on a new line. | 969 |
![]() | '+' should be on a new line. | 970 |
![]() | Method 'finishSuperstep' is not designed for extension - needs to be abstract, final or empty. | 975 |
![]() | Parameter partitionStatsList should be final. | 976 |
![]() | '+' should be on a new line. | 990 |
![]() | '+' should be on a new line. | 991 |
![]() | '+' should be on a new line. | 992 |
![]() | '+' should be on a new line. | 1010 |
![]() | '+' should be on a new line. | 1011 |
![]() | '+' should be on a new line. | 1036 |
![]() | '+' should be on a new line. | 1045 |
![]() | '+' should be on a new line. | 1048 |
![]() | '+' should be on a new line. | 1051 |
![]() | '+' should be on a new line. | 1054 |
![]() | '+' should be on a new line. | 1055 |
![]() | '+' should be on a new line. | 1056 |
![]() | '+' should be on a new line. | 1057 |
![]() | '+' should be on a new line. | 1069 |
![]() | '+' should be on a new line. | 1073 |
![]() | '+' should be on a new line. | 1080 |
![]() | '+' should be on a new line. | 1084 |
![]() | '+' should be on a new line. | 1085 |
![]() | '+' should be on a new line. | 1086 |
![]() | Expected @throws tag for 'IOException'. | 1099 |
![]() | Expected @throws tag for 'InterruptedException'. | 1099 |
![]() | '==' should be on a new line. | 1100 |
![]() | '+' should be on a new line. | 1102 |
![]() | ':' should be on a new line. | 1112 |
![]() | Method 'cleanup' is not designed for extension - needs to be abstract, final or empty. | 1121 |
![]() | '+' should be on a new line. | 1130 |
![]() | '+' should be on a new line. | 1140 |
![]() | '+' should be on a new line. | 1145 |
![]() | '+' should be on a new line. | 1150 |
![]() | '+' should be on a new line. | 1154 |
![]() | Method 'storeCheckpoint' is not designed for extension - needs to be abstract, final or empty. | 1170 |
![]() | '+' should be on a new line. | 1172 |
![]() | '+' should be on a new line. | 1173 |
![]() | '+' should be on a new line. | 1174 |
![]() | '+' should be on a new line. | 1180 |
![]() | '+' should be on a new line. | 1181 |
![]() | '+' should be on a new line. | 1184 |
![]() | '+' should be on a new line. | 1185 |
![]() | '+' should be on a new line. | 1188 |
![]() | '+' should be on a new line. | 1189 |
![]() | '+' should be on a new line. | 1195 |
![]() | '+' should be on a new line. | 1199 |
![]() | ':' should be on a new line. | 1212 |
![]() | '+' should be on a new line. | 1230 |
![]() | '+' should be on a new line. | 1231 |
![]() | '+' should be on a new line. | 1232 |
![]() | '+' should be on a new line. | 1245 |
![]() | '+' should be on a new line. | 1262 |
![]() | '+' should be on a new line. | 1265 |
![]() | '+' should be on a new line. | 1268 |
![]() | Method 'loadCheckpoint' is not designed for extension - needs to be abstract, final or empty. | 1273 |
![]() | Parameter superstep should be final. | 1274 |
![]() | ':' should be on a new line. | 1293 |
![]() | '+' should be on a new line. | 1297 |
![]() | '+' should be on a new line. | 1300 |
![]() | '+' should be on a new line. | 1316 |
![]() | '+' should be on a new line. | 1328 |
![]() | '+' should be on a new line. | 1338 |
![]() | '+' should be on a new line. | 1343 |
![]() | '+' should be on a new line. | 1350 |
![]() | '+' should be on a new line. | 1356 |
![]() | '+' should be on a new line. | 1357 |
![]() | '+' should be on a new line. | 1358 |
![]() | First sentence should end with a period. | 1383 |
![]() | Parameter workerPartitionMap should be final. | 1390 |
![]() | ':' should be on a new line. | 1395 |
![]() | '+' should be on a new line. | 1402 |
![]() | '+' should be on a new line. | 1403 |
![]() | '+' should be on a new line. | 1407 |
![]() | '+' should be on a new line. | 1408 |
![]() | '+' should be on a new line. | 1433 |
![]() | '+' should be on a new line. | 1437 |
![]() | Parameter masterSetPartitionOwners should be final. | 1447 |
![]() | '+' should be on a new line. | 1476 |
![]() | '+' should be on a new line. | 1494 |
![]() | Method 'processEvent' is not designed for extension - needs to be abstract, final or empty. | 1520 |
![]() | Parameter event should be final. | 1521 |
![]() | '&&' should be on a new line. | 1523 |
![]() | '+' should be on a new line. | 1526 |
![]() | '==' should be on a new line. | 1531 |
![]() | '&&' should be on a new line. | 1532 |
![]() | '!=' should be on a new line. | 1533 |
![]() | '+' should be on a new line. | 1535 |
![]() | '+' should be on a new line. | 1541 |
![]() | '&&' should be on a new line. | 1545 |
![]() | '+' should be on a new line. | 1548 |
![]() | Method 'getWorkerInfo' is not designed for extension - needs to be abstract, final or empty. | 1558 |
![]() | Method 'getPartitionStore' is not designed for extension - needs to be abstract, final or empty. | 1563 |
![]() | Method 'getPartitionOwners' is not designed for extension - needs to be abstract, final or empty. | 1572 |
![]() | Method 'getVertexPartitionOwner' is not designed for extension - needs to be abstract, final or empty. | 1577 |
![]() | Parameter vertexId should be final. | 1578 |
![]() | Method 'getPartition' is not designed for extension - needs to be abstract, final or empty. | 1582 |
![]() | Parameter vertexId should be final. | 1583 |
![]() | Method 'getPartitionId' is not designed for extension - needs to be abstract, final or empty. | 1587 |
![]() | Parameter vertexId should be final. | 1588 |
![]() | Method 'hasPartition' is not designed for extension - needs to be abstract, final or empty. | 1593 |
![]() | Parameter partitionId should be final. | 1594 |
![]() | Method 'getVertex' is not designed for extension - needs to be abstract, final or empty. | 1598 |
![]() | Parameter vertexId should be final. | 1599 |
![]() | Method 'getServerData' is not designed for extension - needs to be abstract, final or empty. | 1609 |
Violation | Message | Line |
---|---|---|
![]() | Class BspUtils should be declared as final. | 34 |
![]() | Parameter conf should be final. | 54 |
![]() | First sentence should end with a period. | 61 |
![]() | Parameter conf should be final. | 75 |
![]() | First sentence should end with a period. | 81 |
![]() | Parameter conf should be final. | 94 |
![]() | Parameter conf should be final. | 117 |
![]() | First sentence should end with a period. | 124 |
![]() | Parameter conf should be final. | 139 |
![]() | Parameter conf should be final. | 161 |
![]() | First sentence should end with a period. | 168 |
![]() | Parameter conf should be final. | 180 |
![]() | Parameter conf should be final. | 193 |
![]() | First sentence should end with a period. | 199 |
![]() | Parameter conf should be final. | 205 |
![]() | Parameter conf should be final. | 222 |
![]() | First sentence should end with a period. | 229 |
![]() | Parameter conf should be final. | 239 |
![]() | Parameter conf should be final. | 260 |
![]() | First sentence should end with a period. | 267 |
![]() | Parameter conf should be final. | 281 |
![]() | Parameter graphState should be final. | 282 |
![]() | Parameter conf should be final. | 298 |
![]() | First sentence should end with a period. | 305 |
![]() | Parameter conf should be final. | 319 |
![]() | Parameter graphState should be final. | 320 |
![]() | First sentence should end with a period. | 329 |
![]() | Parameter conf should be final. | 336 |
![]() | First sentence should end with a period. | 343 |
![]() | Parameter conf should be final. | 350 |
![]() | First sentence should end with a period. | 358 |
![]() | Parameter conf should be final. | 371 |
![]() | First sentence should end with a period. | 378 |
![]() | Parameter conf should be final. | 391 |
![]() | Parameter conf should be final. | 407 |
![]() | First sentence should end with a period. | 412 |
![]() | Parameter conf should be final. | 421 |
![]() | Parameter conf should be final. | 443 |
![]() | First sentence should end with a period. | 448 |
![]() | Parameter conf should be final. | 457 |
![]() | Parameter conf should be final. | 483 |
![]() | First sentence should end with a period. | 488 |
![]() | Parameter conf should be final. | 497 |
![]() | Parameter conf should be final. | 523 |
![]() | First sentence should end with a period. | 528 |
![]() | Parameter conf should be final. | 537 |
![]() | Class BspUtils should be declared as final. | 34 |
![]() | Parameter conf should be final. | 54 |
![]() | First sentence should end with a period. | 61 |
![]() | Parameter conf should be final. | 75 |
![]() | First sentence should end with a period. | 81 |
![]() | Parameter conf should be final. | 94 |
![]() | Parameter conf should be final. | 117 |
![]() | First sentence should end with a period. | 124 |
![]() | Parameter conf should be final. | 139 |
![]() | Parameter conf should be final. | 161 |
![]() | First sentence should end with a period. | 168 |
![]() | Parameter conf should be final. | 180 |
![]() | Parameter conf should be final. | 193 |
![]() | First sentence should end with a period. | 199 |
![]() | Parameter conf should be final. | 205 |
![]() | Parameter conf should be final. | 222 |
![]() | First sentence should end with a period. | 229 |
![]() | Parameter conf should be final. | 239 |
![]() | Parameter conf should be final. | 260 |
![]() | First sentence should end with a period. | 267 |
![]() | Parameter conf should be final. | 281 |
![]() | Parameter graphState should be final. | 282 |
![]() | Parameter conf should be final. | 298 |
![]() | First sentence should end with a period. | 305 |
![]() | Parameter conf should be final. | 319 |
![]() | Parameter graphState should be final. | 320 |
![]() | First sentence should end with a period. | 329 |
![]() | Parameter conf should be final. | 336 |
![]() | First sentence should end with a period. | 343 |
![]() | Parameter conf should be final. | 350 |
![]() | First sentence should end with a period. | 358 |
![]() | Parameter conf should be final. | 371 |
![]() | First sentence should end with a period. | 378 |
![]() | Parameter conf should be final. | 391 |
![]() | Parameter conf should be final. | 407 |
![]() | First sentence should end with a period. | 412 |
![]() | Parameter conf should be final. | 421 |
![]() | Parameter conf should be final. | 443 |
![]() | First sentence should end with a period. | 448 |
![]() | Parameter conf should be final. | 457 |
![]() | Parameter conf should be final. | 483 |
![]() | First sentence should end with a period. | 488 |
![]() | Parameter conf should be final. | 497 |
![]() | Parameter conf should be final. | 523 |
![]() | First sentence should end with a period. | 528 |
![]() | Parameter conf should be final. | 537 |
Violation | Message | Line |
---|---|---|
![]() | Parameter in should be final. | 34 |
![]() | Parameter out should be final. | 38 |
![]() | Parameter in should be final. | 34 |
![]() | Parameter out should be final. | 38 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 34 |
![]() | First sentence should end with a period. | 36 |
![]() | First sentence should end with a period. | 39 |
![]() | First sentence should end with a period. | 44 |
![]() | Parameter targetVertexId should be final. | 50 |
![]() | 'targetVertexId' hides a field. | 50 |
![]() | Parameter value should be final. | 50 |
![]() | 'value' hides a field. | 50 |
![]() | First sentence should end with a period. | 55 |
![]() | Method 'getTargetVertexId' is not designed for extension - needs to be abstract, final or empty. | 60 |
![]() | First sentence should end with a period. | 64 |
![]() | Method 'getValue' is not designed for extension - needs to be abstract, final or empty. | 69 |
![]() | Method 'setTargetVertexId' is not designed for extension - needs to be abstract, final or empty. | 78 |
![]() | Parameter targetVertexId should be final. | 78 |
![]() | 'targetVertexId' hides a field. | 78 |
![]() | Method 'setValue' is not designed for extension - needs to be abstract, final or empty. | 87 |
![]() | Parameter value should be final. | 87 |
![]() | 'value' hides a field. | 87 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 91 |
![]() | '+' should be on a new line. | 93 |
![]() | Method 'compareTo' is not designed for extension - needs to be abstract, final or empty. | 97 |
![]() | Parameter edge should be final. | 99 |
![]() | Method 'equals' is not designed for extension - needs to be abstract, final or empty. | 103 |
![]() | Parameter o should be final. | 104 |
![]() | Avoid inline conditionals. | 114 |
![]() | ':' should be on a new line. | 114 |
![]() | Avoid inline conditionals. | 118 |
![]() | Method 'hashCode' is not designed for extension - needs to be abstract, final or empty. | 125 |
![]() | Avoid inline conditionals. | 127 |
![]() | '31' is a magic number. | 128 |
![]() | Avoid inline conditionals. | 128 |
![]() | First sentence should end with a period. | 34 |
![]() | First sentence should end with a period. | 36 |
![]() | First sentence should end with a period. | 39 |
![]() | First sentence should end with a period. | 44 |
![]() | Parameter targetVertexId should be final. | 50 |
![]() | 'targetVertexId' hides a field. | 50 |
![]() | Parameter value should be final. | 50 |
![]() | 'value' hides a field. | 50 |
![]() | First sentence should end with a period. | 55 |
![]() | Method 'getTargetVertexId' is not designed for extension - needs to be abstract, final or empty. | 60 |
![]() | First sentence should end with a period. | 64 |
![]() | Method 'getValue' is not designed for extension - needs to be abstract, final or empty. | 69 |
![]() | Method 'setTargetVertexId' is not designed for extension - needs to be abstract, final or empty. | 78 |
![]() | Parameter targetVertexId should be final. | 78 |
![]() | 'targetVertexId' hides a field. | 78 |
![]() | Method 'setValue' is not designed for extension - needs to be abstract, final or empty. | 87 |
![]() | Parameter value should be final. | 87 |
![]() | 'value' hides a field. | 87 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 91 |
![]() | '+' should be on a new line. | 93 |
![]() | Method 'compareTo' is not designed for extension - needs to be abstract, final or empty. | 97 |
![]() | Parameter edge should be final. | 99 |
![]() | Method 'equals' is not designed for extension - needs to be abstract, final or empty. | 103 |
![]() | Parameter o should be final. | 104 |
![]() | Avoid inline conditionals. | 114 |
![]() | ':' should be on a new line. | 114 |
![]() | Avoid inline conditionals. | 118 |
![]() | Method 'hashCode' is not designed for extension - needs to be abstract, final or empty. | 125 |
![]() | Avoid inline conditionals. | 127 |
![]() | '31' is a magic number. | 128 |
![]() | Avoid inline conditionals. | 128 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 49 |
![]() | First sentence should end with a period. | 51 |
![]() | First sentence should end with a period. | 53 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 56 |
![]() | Parameter id should be final. | 57 |
![]() | Parameter value should be final. | 57 |
![]() | Parameter edges should be final. | 57 |
![]() | Parameter messages should be final. | 57 |
![]() | Method 'getEdges' is not designed for extension - needs to be abstract, final or empty. | 69 |
![]() | Parameter targetVertexId should be final. | 75 |
![]() | Parameter value should be final. | 75 |
![]() | '+' should be on a new line. | 78 |
![]() | '+' should be on a new line. | 79 |
![]() | Method 'getNumEdges' is not designed for extension - needs to be abstract, final or empty. | 88 |
![]() | Method 'removeEdge' is not designed for extension - needs to be abstract, final or empty. | 93 |
![]() | Parameter targetVertexId should be final. | 94 |
![]() | Method 'putMessages' is not designed for extension - needs to be abstract, final or empty. | 106 |
![]() | Parameter messages should be final. | 107 |
![]() | Method 'getMessages' is not designed for extension - needs to be abstract, final or empty. | 112 |
![]() | Method 'getNumMessages' is not designed for extension - needs to be abstract, final or empty. | 117 |
![]() | Parameter in should be final. | 123 |
![]() | Parameter out should be final. | 157 |
![]() | Method 'releaseResources' is not designed for extension - needs to be abstract, final or empty. | 175 |
![]() | First sentence should end with a period. | 49 |
![]() | First sentence should end with a period. | 51 |
![]() | First sentence should end with a period. | 53 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 56 |
![]() | Parameter id should be final. | 57 |
![]() | Parameter value should be final. | 57 |
![]() | Parameter edges should be final. | 57 |
![]() | Parameter messages should be final. | 57 |
![]() | Method 'getEdges' is not designed for extension - needs to be abstract, final or empty. | 69 |
![]() | Parameter targetVertexId should be final. | 75 |
![]() | Parameter value should be final. | 75 |
![]() | '+' should be on a new line. | 78 |
![]() | '+' should be on a new line. | 79 |
![]() | Method 'getNumEdges' is not designed for extension - needs to be abstract, final or empty. | 88 |
![]() | Method 'removeEdge' is not designed for extension - needs to be abstract, final or empty. | 93 |
![]() | Parameter targetVertexId should be final. | 94 |
![]() | Method 'putMessages' is not designed for extension - needs to be abstract, final or empty. | 106 |
![]() | Parameter messages should be final. | 107 |
![]() | Method 'getMessages' is not designed for extension - needs to be abstract, final or empty. | 112 |
![]() | Method 'getNumMessages' is not designed for extension - needs to be abstract, final or empty. | 117 |
![]() | Parameter in should be final. | 123 |
![]() | Parameter out should be final. | 157 |
![]() | Method 'releaseResources' is not designed for extension - needs to be abstract, final or empty. | 175 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 41 |
![]() | First sentence should end with a period. | 43 |
![]() | First sentence should end with a period. | 47 |
![]() | First sentence should end with a period. | 50 |
![]() | First sentence should end with a period. | 53 |
![]() | First sentence should end with a period. | 56 |
![]() | First sentence should end with a period. | 59 |
![]() | First sentence should end with a period. | 63 |
![]() | First sentence should end with a period. | 65 |
![]() | First sentence should end with a period. | 67 |
![]() | First sentence should end with a period. | 69 |
![]() | First sentence should end with a period. | 71 |
![]() | First sentence should end with a period. | 74 |
![]() | First sentence should end with a period. | 78 |
![]() | First sentence should end with a period. | 99 |
![]() | First sentence should end with a period. | 103 |
![]() | First sentence should end with a period. | 112 |
![]() | First sentence should end with a period. | 115 |
![]() | First sentence should end with a period. | 117 |
![]() | First sentence should end with a period. | 120 |
![]() | First sentence should end with a period. | 126 |
![]() | First sentence should end with a period. | 129 |
![]() | First sentence should end with a period. | 132 |
![]() | First sentence should end with a period. | 135 |
![]() | First sentence should end with a period. | 139 |
![]() | First sentence should end with a period. | 142 |
![]() | First sentence should end with a period. | 145 |
![]() | First sentence should end with a period. | 148 |
![]() | First sentence should end with a period. | 151 |
![]() | First sentence should end with a period. | 154 |
![]() | First sentence should end with a period. | 157 |
![]() | First sentence should end with a period. | 159 |
![]() | First sentence should end with a period. | 162 |
![]() | First sentence should end with a period. | 164 |
![]() | First sentence should end with a period. | 170 |
![]() | First sentence should end with a period. | 173 |
![]() | First sentence should end with a period. | 177 |
![]() | First sentence should end with a period. | 180 |
![]() | First sentence should end with a period. | 184 |
![]() | First sentence should end with a period. | 187 |
![]() | First sentence should end with a period. | 190 |
![]() | First sentence should end with a period. | 193 |
![]() | First sentence should end with a period. | 196 |
![]() | First sentence should end with a period. | 199 |
![]() | First sentence should end with a period. | 202 |
![]() | First sentence should end with a period. | 205 |
![]() | First sentence should end with a period. | 208 |
![]() | First sentence should end with a period. | 211 |
![]() | First sentence should end with a period. | 214 |
![]() | First sentence should end with a period. | 216 |
![]() | First sentence should end with a period. | 219 |
![]() | First sentence should end with a period. | 222 |
![]() | First sentence should end with a period. | 224 |
![]() | First sentence should end with a period. | 230 |
![]() | First sentence should end with a period. | 233 |
![]() | First sentence should end with a period. | 235 |
![]() | First sentence should end with a period. | 238 |
![]() | First sentence should end with a period. | 241 |
![]() | First sentence should end with a period. | 244 |
![]() | First sentence should end with a period. | 247 |
![]() | First sentence should end with a period. | 250 |
![]() | First sentence should end with a period. | 253 |
![]() | First sentence should end with a period. | 256 |
![]() | First sentence should end with a period. | 259 |
![]() | First sentence should end with a period. | 262 |
![]() | First sentence should end with a period. | 264 |
![]() | First sentence should end with a period. | 267 |
![]() | First sentence should end with a period. | 270 |
![]() | First sentence should end with a period. | 273 |
![]() | First sentence should end with a period. | 276 |
![]() | First sentence should end with a period. | 279 |
![]() | First sentence should end with a period. | 282 |
![]() | First sentence should end with a period. | 285 |
![]() | First sentence should end with a period. | 289 |
![]() | First sentence should end with a period. | 291 |
![]() | First sentence should end with a period. | 294 |
![]() | First sentence should end with a period. | 297 |
![]() | First sentence should end with a period. | 300 |
![]() | First sentence should end with a period. | 303 |
![]() | First sentence should end with a period. | 309 |
![]() | First sentence should end with a period. | 321 |
![]() | First sentence should end with a period. | 332 |
![]() | First sentence should end with a period. | 342 |
![]() | First sentence should end with a period. | 348 |
![]() | First sentence should end with a period. | 351 |
![]() | '+' should be on a new line. | 353 |
![]() | First sentence should end with a period. | 371 |
![]() | First sentence should end with a period. | 388 |
![]() | First sentence should end with a period. | 420 |
![]() | First sentence should end with a period. | 423 |
![]() | First sentence should end with a period. | 478 |
![]() | First sentence should end with a period. | 481 |
![]() | First sentence should end with a period. | 483 |
![]() | First sentence should end with a period. | 487 |
![]() | Parameter jobName should be final. | 493 |
![]() | Expected @throws tag for 'IOException'. | 493 |
![]() | Parameter conf should be final. | 504 |
![]() | 'conf' hides a field. | 504 |
![]() | Parameter jobName should be final. | 504 |
![]() | Expected @throws tag for 'IOException'. | 504 |
![]() | Method 'getConfiguration' is not designed for extension - needs to be abstract, final or empty. | 514 |
![]() | Method 'getInternalJob' is not designed for extension - needs to be abstract, final or empty. | 525 |
![]() | '||' should be on a new line. | 537 |
![]() | '100.0f' is a magic number. | 539 |
![]() | '+' should be on a new line. | 541 |
![]() | '+' should be on a new line. | 543 |
![]() | '+' should be on a new line. | 559 |
![]() | '+' should be on a new line. | 560 |
![]() | First sentence should end with a period. | 566 |
![]() | Parameter vertexClass should be final. | 571 |
![]() | First sentence should end with a period. | 575 |
![]() | Parameter vertexInputFormatClass should be final. | 581 |
![]() | First sentence should end with a period. | 587 |
![]() | Parameter masterComputeClass should be final. | 592 |
![]() | First sentence should end with a period. | 597 |
![]() | Parameter vertexOutputFormatClass should be final. | 603 |
![]() | First sentence should end with a period. | 609 |
![]() | Parameter vertexCombinerClass should be final. | 614 |
![]() | First sentence should end with a period. | 620 |
![]() | Parameter graphPartitionerFactoryClass should be final. | 626 |
![]() | First sentence should end with a period. | 632 |
![]() | Parameter vertexResolverClass should be final. | 637 |
![]() | First sentence should end with a period. | 643 |
![]() | Parameter workerContextClass should be final. | 649 |
![]() | First sentence should end with a period. | 655 |
![]() | Parameter aggregatorWriterClass should be final. | 662 |
![]() | Parameter minWorkers should be final. | 678 |
![]() | Parameter maxWorkers should be final. | 679 |
![]() | Parameter minPercentResponded should be final. | 680 |
![]() | Parameter serverList should be final. | 693 |
![]() | Parameter conf should be final. | 704 |
![]() | '+' should be on a new line. | 714 |
![]() | '+' should be on a new line. | 715 |
![]() | '+' should be on a new line. | 721 |
![]() | '+' should be on a new line. | 722 |
![]() | Parameter param should be final. | 733 |
![]() | Parameter defaultValue should be final. | 733 |
![]() | Parameter verbose should be final. | 748 |
![]() | Expected @throws tag for 'IOException'. | 749 |
![]() | Expected @throws tag for 'InterruptedException'. | 749 |
![]() | Expected @throws tag for 'ClassNotFoundException'. | 749 |
![]() | '512' is a magic number. | 754 |
![]() | '1024' is a magic number. | 758 |
![]() | '1024' is a magic number. | 759 |
![]() | '60000' is a magic number. | 766 |
![]() | '5' is a magic number. | 766 |
![]() | First sentence should end with a period. | 41 |
![]() | First sentence should end with a period. | 43 |
![]() | First sentence should end with a period. | 47 |
![]() | First sentence should end with a period. | 50 |
![]() | First sentence should end with a period. | 53 |
![]() | First sentence should end with a period. | 56 |
![]() | First sentence should end with a period. | 59 |
![]() | First sentence should end with a period. | 63 |
![]() | First sentence should end with a period. | 65 |
![]() | First sentence should end with a period. | 67 |
![]() | First sentence should end with a period. | 69 |
![]() | First sentence should end with a period. | 71 |
![]() | First sentence should end with a period. | 74 |
![]() | First sentence should end with a period. | 78 |
![]() | First sentence should end with a period. | 99 |
![]() | First sentence should end with a period. | 103 |
![]() | First sentence should end with a period. | 112 |
![]() | First sentence should end with a period. | 115 |
![]() | First sentence should end with a period. | 117 |
![]() | First sentence should end with a period. | 120 |
![]() | First sentence should end with a period. | 126 |
![]() | First sentence should end with a period. | 129 |
![]() | First sentence should end with a period. | 132 |
![]() | First sentence should end with a period. | 135 |
![]() | First sentence should end with a period. | 139 |
![]() | First sentence should end with a period. | 142 |
![]() | First sentence should end with a period. | 145 |
![]() | First sentence should end with a period. | 148 |
![]() | First sentence should end with a period. | 151 |
![]() | First sentence should end with a period. | 154 |
![]() | First sentence should end with a period. | 157 |
![]() | First sentence should end with a period. | 159 |
![]() | First sentence should end with a period. | 162 |
![]() | First sentence should end with a period. | 164 |
![]() | First sentence should end with a period. | 170 |
![]() | First sentence should end with a period. | 173 |
![]() | First sentence should end with a period. | 177 |
![]() | First sentence should end with a period. | 180 |
![]() | First sentence should end with a period. | 184 |
![]() | First sentence should end with a period. | 187 |
![]() | First sentence should end with a period. | 190 |
![]() | First sentence should end with a period. | 193 |
![]() | First sentence should end with a period. | 196 |
![]() | First sentence should end with a period. | 199 |
![]() | First sentence should end with a period. | 202 |
![]() | First sentence should end with a period. | 205 |
![]() | First sentence should end with a period. | 208 |
![]() | First sentence should end with a period. | 211 |
![]() | First sentence should end with a period. | 214 |
![]() | First sentence should end with a period. | 216 |
![]() | First sentence should end with a period. | 219 |
![]() | First sentence should end with a period. | 222 |
![]() | First sentence should end with a period. | 224 |
![]() | First sentence should end with a period. | 230 |
![]() | First sentence should end with a period. | 233 |
![]() | First sentence should end with a period. | 235 |
![]() | First sentence should end with a period. | 238 |
![]() | First sentence should end with a period. | 241 |
![]() | First sentence should end with a period. | 244 |
![]() | First sentence should end with a period. | 247 |
![]() | First sentence should end with a period. | 250 |
![]() | First sentence should end with a period. | 253 |
![]() | First sentence should end with a period. | 256 |
![]() | First sentence should end with a period. | 259 |
![]() | First sentence should end with a period. | 262 |
![]() | First sentence should end with a period. | 264 |
![]() | First sentence should end with a period. | 267 |
![]() | First sentence should end with a period. | 270 |
![]() | First sentence should end with a period. | 273 |
![]() | First sentence should end with a period. | 276 |
![]() | First sentence should end with a period. | 279 |
![]() | First sentence should end with a period. | 282 |
![]() | First sentence should end with a period. | 285 |
![]() | First sentence should end with a period. | 289 |
![]() | First sentence should end with a period. | 291 |
![]() | First sentence should end with a period. | 294 |
![]() | First sentence should end with a period. | 297 |
![]() | First sentence should end with a period. | 300 |
![]() | First sentence should end with a period. | 303 |
![]() | First sentence should end with a period. | 309 |
![]() | First sentence should end with a period. | 321 |
![]() | First sentence should end with a period. | 332 |
![]() | First sentence should end with a period. | 342 |
![]() | First sentence should end with a period. | 348 |
![]() | First sentence should end with a period. | 351 |
![]() | '+' should be on a new line. | 353 |
![]() | First sentence should end with a period. | 371 |
![]() | First sentence should end with a period. | 388 |
![]() | First sentence should end with a period. | 420 |
![]() | First sentence should end with a period. | 423 |
![]() | First sentence should end with a period. | 478 |
![]() | First sentence should end with a period. | 481 |
![]() | First sentence should end with a period. | 483 |
![]() | First sentence should end with a period. | 487 |
![]() | Parameter jobName should be final. | 493 |
![]() | Expected @throws tag for 'IOException'. | 493 |
![]() | Parameter conf should be final. | 504 |
![]() | 'conf' hides a field. | 504 |
![]() | Parameter jobName should be final. | 504 |
![]() | Expected @throws tag for 'IOException'. | 504 |
![]() | Method 'getConfiguration' is not designed for extension - needs to be abstract, final or empty. | 514 |
![]() | Method 'getInternalJob' is not designed for extension - needs to be abstract, final or empty. | 525 |
![]() | '||' should be on a new line. | 537 |
![]() | '100.0f' is a magic number. | 539 |
![]() | '+' should be on a new line. | 541 |
![]() | '+' should be on a new line. | 543 |
![]() | '+' should be on a new line. | 559 |
![]() | '+' should be on a new line. | 560 |
![]() | First sentence should end with a period. | 566 |
![]() | Parameter vertexClass should be final. | 571 |
![]() | First sentence should end with a period. | 575 |
![]() | Parameter vertexInputFormatClass should be final. | 581 |
![]() | First sentence should end with a period. | 587 |
![]() | Parameter masterComputeClass should be final. | 592 |
![]() | First sentence should end with a period. | 597 |
![]() | Parameter vertexOutputFormatClass should be final. | 603 |
![]() | First sentence should end with a period. | 609 |
![]() | Parameter vertexCombinerClass should be final. | 614 |
![]() | First sentence should end with a period. | 620 |
![]() | Parameter graphPartitionerFactoryClass should be final. | 626 |
![]() | First sentence should end with a period. | 632 |
![]() | Parameter vertexResolverClass should be final. | 637 |
![]() | First sentence should end with a period. | 643 |
![]() | Parameter workerContextClass should be final. | 649 |
![]() | First sentence should end with a period. | 655 |
![]() | Parameter aggregatorWriterClass should be final. | 662 |
![]() | Parameter minWorkers should be final. | 678 |
![]() | Parameter maxWorkers should be final. | 679 |
![]() | Parameter minPercentResponded should be final. | 680 |
![]() | Parameter serverList should be final. | 693 |
![]() | Parameter conf should be final. | 704 |
![]() | '+' should be on a new line. | 714 |
![]() | '+' should be on a new line. | 715 |
![]() | '+' should be on a new line. | 721 |
![]() | '+' should be on a new line. | 722 |
![]() | Parameter param should be final. | 733 |
![]() | Parameter defaultValue should be final. | 733 |
![]() | Parameter verbose should be final. | 748 |
![]() | Expected @throws tag for 'IOException'. | 749 |
![]() | Expected @throws tag for 'InterruptedException'. | 749 |
![]() | Expected @throws tag for 'ClassNotFoundException'. | 749 |
![]() | '512' is a magic number. | 754 |
![]() | '1024' is a magic number. | 758 |
![]() | '1024' is a magic number. | 759 |
![]() | '60000' is a magic number. | 766 |
![]() | '5' is a magic number. | 766 |
Violation | Message | Line |
---|---|---|
![]() | Comment matches to-do format 'TODO:'. | 35 |
![]() | First sentence should end with a period. | 58 |
![]() | First sentence should end with a period. | 66 |
![]() | First sentence should end with a period. | 74 |
![]() | First sentence should end with a period. | 77 |
![]() | First sentence should end with a period. | 80 |
![]() | First sentence should end with a period. | 83 |
![]() | First sentence should end with a period. | 86 |
![]() | Parameter conf should be final. | 89 |
![]() | Method 'transferThisPartition' is not designed for extension - needs to be abstract, final or empty. | 107 |
![]() | Parameter owner should be final. | 107 |
![]() | '>=' should be on a new line. | 109 |
![]() | '||' should be on a new line. | 110 |
![]() | '>=' should be on a new line. | 111 |
![]() | '?' should be on a new line. | 126 |
![]() | Avoid inline conditionals. | 126 |
![]() | '?' should be on a new line. | 136 |
![]() | Avoid inline conditionals. | 136 |
![]() | First sentence should end with a period. | 140 |
![]() | Method 'clearCounters' is not designed for extension - needs to be abstract, final or empty. | 141 |
![]() | Method 'incrementCounters' is not designed for extension - needs to be abstract, final or empty. | 160 |
![]() | Parameter partitionOwner should be final. | 162 |
![]() | Parameter vertex should be final. | 163 |
![]() | '+' should be on a new line. | 171 |
![]() | First sentence should end with a period. | 175 |
![]() | Method 'getMaxEdgesPerTransfer' is not designed for extension - needs to be abstract, final or empty. | 177 |
![]() | First sentence should end with a period. | 181 |
![]() | Method 'getMaxVerticesPerTransfer' is not designed for extension - needs to be abstract, final or empty. | 183 |
![]() | First sentence should end with a period. | 187 |
![]() | Method 'getTotalEdges' is not designed for extension - needs to be abstract, final or empty. | 189 |
![]() | First sentence should end with a period. | 193 |
![]() | Method 'getTotalVertices' is not designed for extension - needs to be abstract, final or empty. | 195 |
![]() | Comment matches to-do format 'TODO:'. | 35 |
![]() | First sentence should end with a period. | 58 |
![]() | First sentence should end with a period. | 66 |
![]() | First sentence should end with a period. | 74 |
![]() | First sentence should end with a period. | 77 |
![]() | First sentence should end with a period. | 80 |
![]() | First sentence should end with a period. | 83 |
![]() | First sentence should end with a period. | 86 |
![]() | Parameter conf should be final. | 89 |
![]() | Method 'transferThisPartition' is not designed for extension - needs to be abstract, final or empty. | 107 |
![]() | Parameter owner should be final. | 107 |
![]() | '>=' should be on a new line. | 109 |
![]() | '||' should be on a new line. | 110 |
![]() | '>=' should be on a new line. | 111 |
![]() | '?' should be on a new line. | 126 |
![]() | Avoid inline conditionals. | 126 |
![]() | '?' should be on a new line. | 136 |
![]() | Avoid inline conditionals. | 136 |
![]() | First sentence should end with a period. | 140 |
![]() | Method 'clearCounters' is not designed for extension - needs to be abstract, final or empty. | 141 |
![]() | Method 'incrementCounters' is not designed for extension - needs to be abstract, final or empty. | 160 |
![]() | Parameter partitionOwner should be final. | 162 |
![]() | Parameter vertex should be final. | 163 |
![]() | '+' should be on a new line. | 171 |
![]() | First sentence should end with a period. | 175 |
![]() | Method 'getMaxEdgesPerTransfer' is not designed for extension - needs to be abstract, final or empty. | 177 |
![]() | First sentence should end with a period. | 181 |
![]() | Method 'getMaxVerticesPerTransfer' is not designed for extension - needs to be abstract, final or empty. | 183 |
![]() | First sentence should end with a period. | 187 |
![]() | Method 'getTotalEdges' is not designed for extension - needs to be abstract, final or empty. | 189 |
![]() | First sentence should end with a period. | 193 |
![]() | Method 'getTotalVertices' is not designed for extension - needs to be abstract, final or empty. | 195 |
Violation | Message | Line |
---|---|---|
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 47 |
![]() | First sentence should end with a period. | 50 |
![]() | First sentence should end with a period. | 52 |
![]() | First sentence should end with a period. | 54 |
![]() | First sentence should end with a period. | 56 |
![]() | First sentence should end with a period. | 58 |
![]() | First sentence should end with a period. | 61 |
![]() | First sentence should end with a period. | 63 |
![]() | First sentence should end with a period. | 65 |
![]() | First sentence should end with a period. | 67 |
![]() | Parameter conf should be final. | 81 |
![]() | 'conf' hides a field. | 81 |
![]() | Method 'validateClassTypes' is not designed for extension - needs to be abstract, final or empty. | 91 |
![]() | '+' should be on a new line. | 117 |
![]() | '+' should be on a new line. | 118 |
![]() | '+' should be on a new line. | 125 |
![]() | '+' should be on a new line. | 126 |
![]() | '+' should be on a new line. | 133 |
![]() | '+' should be on a new line. | 134 |
![]() | '+' should be on a new line. | 149 |
![]() | '+' should be on a new line. | 150 |
![]() | '+' should be on a new line. | 155 |
![]() | '+' should be on a new line. | 156 |
![]() | '+' should be on a new line. | 175 |
![]() | '+' should be on a new line. | 176 |
![]() | '+' should be on a new line. | 183 |
![]() | '+' should be on a new line. | 184 |
![]() | '+' should be on a new line. | 191 |
![]() | '+' should be on a new line. | 192 |
![]() | '&&' should be on a new line. | 207 |
![]() | '+' should be on a new line. | 210 |
![]() | '+' should be on a new line. | 211 |
![]() | '&&' should be on a new line. | 214 |
![]() | '+' should be on a new line. | 217 |
![]() | '+' should be on a new line. | 218 |
![]() | '&&' should be on a new line. | 221 |
![]() | '+' should be on a new line. | 224 |
![]() | '+' should be on a new line. | 225 |
![]() | '&&' should be on a new line. | 228 |
![]() | '+' should be on a new line. | 231 |
![]() | '+' should be on a new line. | 232 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 47 |
![]() | First sentence should end with a period. | 50 |
![]() | First sentence should end with a period. | 52 |
![]() | First sentence should end with a period. | 54 |
![]() | First sentence should end with a period. | 56 |
![]() | First sentence should end with a period. | 58 |
![]() | First sentence should end with a period. | 61 |
![]() | First sentence should end with a period. | 63 |
![]() | First sentence should end with a period. | 65 |
![]() | First sentence should end with a period. | 67 |
![]() | Parameter conf should be final. | 81 |
![]() | 'conf' hides a field. | 81 |
![]() | Method 'validateClassTypes' is not designed for extension - needs to be abstract, final or empty. | 91 |
![]() | '+' should be on a new line. | 117 |
![]() | '+' should be on a new line. | 118 |
![]() | '+' should be on a new line. | 125 |
![]() | '+' should be on a new line. | 126 |
![]() | '+' should be on a new line. | 133 |
![]() | '+' should be on a new line. | 134 |
![]() | '+' should be on a new line. | 149 |
![]() | '+' should be on a new line. | 150 |
![]() | '+' should be on a new line. | 155 |
![]() | '+' should be on a new line. | 156 |
![]() | '+' should be on a new line. | 175 |
![]() | '+' should be on a new line. | 176 |
![]() | '+' should be on a new line. | 183 |
![]() | '+' should be on a new line. | 184 |
![]() | '+' should be on a new line. | 191 |
![]() | '+' should be on a new line. | 192 |
![]() | '&&' should be on a new line. | 207 |
![]() | '+' should be on a new line. | 210 |
![]() | '+' should be on a new line. | 211 |
![]() | '&&' should be on a new line. | 214 |
![]() | '+' should be on a new line. | 217 |
![]() | '+' should be on a new line. | 218 |
![]() | '&&' should be on a new line. | 221 |
![]() | '+' should be on a new line. | 224 |
![]() | '+' should be on a new line. | 225 |
![]() | '&&' should be on a new line. | 228 |
![]() | '+' should be on a new line. | 231 |
![]() | '+' should be on a new line. | 232 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 32 |
![]() | First sentence should end with a period. | 34 |
![]() | First sentence should end with a period. | 36 |
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 40 |
![]() | Method 'addPartitionStats' is not designed for extension - needs to be abstract, final or empty. | 48 |
![]() | Parameter partitionStats should be final. | 48 |
![]() | Method 'getVertexCount' is not designed for extension - needs to be abstract, final or empty. | 54 |
![]() | Missing a Javadoc comment. | 54 |
![]() | Method 'getFinishedVertexCount' is not designed for extension - needs to be abstract, final or empty. | 58 |
![]() | Missing a Javadoc comment. | 58 |
![]() | Method 'getEdgeCount' is not designed for extension - needs to be abstract, final or empty. | 62 |
![]() | Missing a Javadoc comment. | 62 |
![]() | Method 'getMessageCount' is not designed for extension - needs to be abstract, final or empty. | 66 |
![]() | Missing a Javadoc comment. | 66 |
![]() | Method 'getHaltComputation' is not designed for extension - needs to be abstract, final or empty. | 70 |
![]() | Missing a Javadoc comment. | 70 |
![]() | Method 'setHaltComputation' is not designed for extension - needs to be abstract, final or empty. | 74 |
![]() | Missing a Javadoc comment. | 74 |
![]() | Parameter value should be final. | 74 |
![]() | Method 'addMessageCount' is not designed for extension - needs to be abstract, final or empty. | 83 |
![]() | Parameter messageCount should be final. | 83 |
![]() | 'messageCount' hides a field. | 83 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 87 |
![]() | Parameter input should be final. | 88 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 96 |
![]() | Parameter output should be final. | 97 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 105 |
![]() | '+' should be on a new line. | 107 |
![]() | '+' should be on a new line. | 108 |
![]() | First sentence should end with a period. | 32 |
![]() | First sentence should end with a period. | 34 |
![]() | First sentence should end with a period. | 36 |
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 40 |
![]() | Method 'addPartitionStats' is not designed for extension - needs to be abstract, final or empty. | 48 |
![]() | Parameter partitionStats should be final. | 48 |
![]() | Method 'getVertexCount' is not designed for extension - needs to be abstract, final or empty. | 54 |
![]() | Missing a Javadoc comment. | 54 |
![]() | Method 'getFinishedVertexCount' is not designed for extension - needs to be abstract, final or empty. | 58 |
![]() | Missing a Javadoc comment. | 58 |
![]() | Method 'getEdgeCount' is not designed for extension - needs to be abstract, final or empty. | 62 |
![]() | Missing a Javadoc comment. | 62 |
![]() | Method 'getMessageCount' is not designed for extension - needs to be abstract, final or empty. | 66 |
![]() | Missing a Javadoc comment. | 66 |
![]() | Method 'getHaltComputation' is not designed for extension - needs to be abstract, final or empty. | 70 |
![]() | Missing a Javadoc comment. | 70 |
![]() | Method 'setHaltComputation' is not designed for extension - needs to be abstract, final or empty. | 74 |
![]() | Missing a Javadoc comment. | 74 |
![]() | Parameter value should be final. | 74 |
![]() | Method 'addMessageCount' is not designed for extension - needs to be abstract, final or empty. | 83 |
![]() | Parameter messageCount should be final. | 83 |
![]() | 'messageCount' hides a field. | 83 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 87 |
![]() | Parameter input should be final. | 88 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 96 |
![]() | Parameter output should be final. | 97 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 105 |
![]() | '+' should be on a new line. | 107 |
![]() | '+' should be on a new line. | 108 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 64 |
![]() | First sentence should end with a period. | 66 |
![]() | First sentence should end with a period. | 68 |
![]() | First sentence should end with a period. | 70 |
![]() | First sentence should end with a period. | 74 |
![]() | First sentence should end with a period. | 76 |
![]() | First sentence should end with a period. | 88 |
![]() | First sentence should end with a period. | 90 |
![]() | First sentence should end with a period. | 92 |
![]() | First sentence should end with a period. | 94 |
![]() | First sentence should end with a period. | 96 |
![]() | First sentence should end with a period. | 98 |
![]() | First sentence should end with a period. | 100 |
![]() | Method 'getMapFunctions' is not designed for extension - needs to be abstract, final or empty. | 109 |
![]() | First sentence should end with a period. | 113 |
![]() | First sentence should end with a period. | 122 |
![]() | Missing a Javadoc comment. | 131 |
![]() | Missing a Javadoc comment. | 135 |
![]() | Parameter t should be final. | 144 |
![]() | Parameter e should be final. | 144 |
![]() | '+' should be on a new line. | 146 |
![]() | Method 'determineClassTypes' is not designed for extension - needs to be abstract, final or empty. | 157 |
![]() | Parameter conf should be final. | 157 |
![]() | 'conf' hides a field. | 157 |
![]() | '3' is a magic number. | 165 |
![]() | Parameter myClass should be final. | 188 |
![]() | Parameter conf should be final. | 225 |
![]() | Parameter zkManager should be final. | 226 |
![]() | Method 'setup' is not designed for extension - needs to be abstract, final or empty. | 262 |
![]() | Parameter context should be final. | 263 |
![]() | '+' should be on a new line. | 323 |
![]() | '*' should be on a new line. | 330 |
![]() | '||' should be on a new line. | 337 |
![]() | '||' should be on a new line. | 338 |
![]() | '||' should be on a new line. | 339 |
![]() | '+' should be on a new line. | 342 |
![]() | '||' should be on a new line. | 353 |
![]() | '||' should be on a new line. | 354 |
![]() | Method 'map' is not designed for extension - needs to be abstract, final or empty. | 382 |
![]() | Method length is 152 lines (max allowed is 150). | 382 |
![]() | Parameter key should be final. | 383 |
![]() | Parameter value should be final. | 383 |
![]() | Parameter context should be final. | 383 |
![]() | '||' should be on a new line. | 398 |
![]() | '+' should be on a new line. | 407 |
![]() | '15000' is a magic number. | 477 |
![]() | ':' should be on a new line. | 479 |
![]() | '||' should be on a new line. | 494 |
![]() | '+' should be on a new line. | 523 |
![]() | '+' should be on a new line. | 524 |
![]() | '+' should be on a new line. | 529 |
![]() | Method 'cleanup' is not designed for extension - needs to be abstract, final or empty. | 537 |
![]() | Parameter context should be final. | 538 |
![]() | Method 'run' is not designed for extension - needs to be abstract, final or empty. | 564 |
![]() | Parameter context should be final. | 565 |
![]() | First sentence should end with a period. | 64 |
![]() | First sentence should end with a period. | 66 |
![]() | First sentence should end with a period. | 68 |
![]() | First sentence should end with a period. | 70 |
![]() | First sentence should end with a period. | 74 |
![]() | First sentence should end with a period. | 76 |
![]() | First sentence should end with a period. | 88 |
![]() | First sentence should end with a period. | 90 |
![]() | First sentence should end with a period. | 92 |
![]() | First sentence should end with a period. | 94 |
![]() | First sentence should end with a period. | 96 |
![]() | First sentence should end with a period. | 98 |
![]() | First sentence should end with a period. | 100 |
![]() | Method 'getMapFunctions' is not designed for extension - needs to be abstract, final or empty. | 109 |
![]() | First sentence should end with a period. | 113 |
![]() | First sentence should end with a period. | 122 |
![]() | Missing a Javadoc comment. | 131 |
![]() | Missing a Javadoc comment. | 135 |
![]() | Parameter t should be final. | 144 |
![]() | Parameter e should be final. | 144 |
![]() | '+' should be on a new line. | 146 |
![]() | Method 'determineClassTypes' is not designed for extension - needs to be abstract, final or empty. | 157 |
![]() | Parameter conf should be final. | 157 |
![]() | 'conf' hides a field. | 157 |
![]() | '3' is a magic number. | 165 |
![]() | Parameter myClass should be final. | 188 |
![]() | Parameter conf should be final. | 225 |
![]() | Parameter zkManager should be final. | 226 |
![]() | Method 'setup' is not designed for extension - needs to be abstract, final or empty. | 262 |
![]() | Parameter context should be final. | 263 |
![]() | '+' should be on a new line. | 323 |
![]() | '*' should be on a new line. | 330 |
![]() | '||' should be on a new line. | 337 |
![]() | '||' should be on a new line. | 338 |
![]() | '||' should be on a new line. | 339 |
![]() | '+' should be on a new line. | 342 |
![]() | '||' should be on a new line. | 353 |
![]() | '||' should be on a new line. | 354 |
![]() | Method 'map' is not designed for extension - needs to be abstract, final or empty. | 382 |
![]() | Method length is 152 lines (max allowed is 150). | 382 |
![]() | Parameter key should be final. | 383 |
![]() | Parameter value should be final. | 383 |
![]() | Parameter context should be final. | 383 |
![]() | '||' should be on a new line. | 398 |
![]() | '+' should be on a new line. | 407 |
![]() | '15000' is a magic number. | 477 |
![]() | ':' should be on a new line. | 479 |
![]() | '||' should be on a new line. | 494 |
![]() | '+' should be on a new line. | 523 |
![]() | '+' should be on a new line. | 524 |
![]() | '+' should be on a new line. | 529 |
![]() | Method 'cleanup' is not designed for extension - needs to be abstract, final or empty. | 537 |
![]() | Parameter context should be final. | 538 |
![]() | Method 'run' is not designed for extension - needs to be abstract, final or empty. | 564 |
![]() | Parameter context should be final. | 565 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 37 |
![]() | First sentence should end with a period. | 39 |
![]() | First sentence should end with a period. | 41 |
![]() | First sentence should end with a period. | 43 |
![]() | First sentence should end with a period. | 45 |
![]() | First sentence should end with a period. | 47 |
![]() | Method 'getSuperstep' is not designed for extension - needs to be abstract, final or empty. | 50 |
![]() | Missing a Javadoc comment. | 50 |
![]() | Method 'setSuperstep' is not designed for extension - needs to be abstract, final or empty. | 60 |
![]() | Parameter superstep should be final. | 60 |
![]() | 'superstep' hides a field. | 60 |
![]() | Method 'getTotalNumVertices' is not designed for extension - needs to be abstract, final or empty. | 65 |
![]() | Missing a Javadoc comment. | 65 |
![]() | Method 'setTotalNumVertices' is not designed for extension - needs to be abstract, final or empty. | 75 |
![]() | Parameter numVertices should be final. | 75 |
![]() | 'numVertices' hides a field. | 75 |
![]() | Method 'getTotalNumEdges' is not designed for extension - needs to be abstract, final or empty. | 80 |
![]() | Missing a Javadoc comment. | 80 |
![]() | Method 'setTotalNumEdges' is not designed for extension - needs to be abstract, final or empty. | 90 |
![]() | Parameter numEdges should be final. | 90 |
![]() | 'numEdges' hides a field. | 90 |
![]() | Method 'getContext' is not designed for extension - needs to be abstract, final or empty. | 95 |
![]() | Missing a Javadoc comment. | 95 |
![]() | Method 'setContext' is not designed for extension - needs to be abstract, final or empty. | 105 |
![]() | Parameter context should be final. | 105 |
![]() | 'context' hides a field. | 105 |
![]() | Method 'getGraphMapper' is not designed for extension - needs to be abstract, final or empty. | 110 |
![]() | Missing a Javadoc comment. | 110 |
![]() | Method 'setGraphMapper' is not designed for extension - needs to be abstract, final or empty. | 120 |
![]() | Parameter graphMapper should be final. | 121 |
![]() | 'graphMapper' hides a field. | 121 |
![]() | Method 'setWorkerCommunications' is not designed for extension - needs to be abstract, final or empty. | 132 |
![]() | Parameter workerCommunications should be final. | 133 |
![]() | 'workerCommunications' hides a field. | 133 |
![]() | Method 'getWorkerCommunications' is not designed for extension - needs to be abstract, final or empty. | 138 |
![]() | Missing a Javadoc comment. | 138 |
![]() | First sentence should end with a period. | 37 |
![]() | First sentence should end with a period. | 39 |
![]() | First sentence should end with a period. | 41 |
![]() | First sentence should end with a period. | 43 |
![]() | First sentence should end with a period. | 45 |
![]() | First sentence should end with a period. | 47 |
![]() | Method 'getSuperstep' is not designed for extension - needs to be abstract, final or empty. | 50 |
![]() | Missing a Javadoc comment. | 50 |
![]() | Method 'setSuperstep' is not designed for extension - needs to be abstract, final or empty. | 60 |
![]() | Parameter superstep should be final. | 60 |
![]() | 'superstep' hides a field. | 60 |
![]() | Method 'getTotalNumVertices' is not designed for extension - needs to be abstract, final or empty. | 65 |
![]() | Missing a Javadoc comment. | 65 |
![]() | Method 'setTotalNumVertices' is not designed for extension - needs to be abstract, final or empty. | 75 |
![]() | Parameter numVertices should be final. | 75 |
![]() | 'numVertices' hides a field. | 75 |
![]() | Method 'getTotalNumEdges' is not designed for extension - needs to be abstract, final or empty. | 80 |
![]() | Missing a Javadoc comment. | 80 |
![]() | Method 'setTotalNumEdges' is not designed for extension - needs to be abstract, final or empty. | 90 |
![]() | Parameter numEdges should be final. | 90 |
![]() | 'numEdges' hides a field. | 90 |
![]() | Method 'getContext' is not designed for extension - needs to be abstract, final or empty. | 95 |
![]() | Missing a Javadoc comment. | 95 |
![]() | Method 'setContext' is not designed for extension - needs to be abstract, final or empty. | 105 |
![]() | Parameter context should be final. | 105 |
![]() | 'context' hides a field. | 105 |
![]() | Method 'getGraphMapper' is not designed for extension - needs to be abstract, final or empty. | 110 |
![]() | Missing a Javadoc comment. | 110 |
![]() | Method 'setGraphMapper' is not designed for extension - needs to be abstract, final or empty. | 120 |
![]() | Parameter graphMapper should be final. | 121 |
![]() | 'graphMapper' hides a field. | 121 |
![]() | Method 'setWorkerCommunications' is not designed for extension - needs to be abstract, final or empty. | 132 |
![]() | Parameter workerCommunications should be final. | 133 |
![]() | 'workerCommunications' hides a field. | 133 |
![]() | Method 'getWorkerCommunications' is not designed for extension - needs to be abstract, final or empty. | 138 |
![]() | Missing a Javadoc comment. | 138 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 57 |
![]() | Variable 'edgeMap' must be private and have accessor methods. | 58 |
![]() | First sentence should end with a period. | 59 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 62 |
![]() | Parameter id should be final. | 64 |
![]() | Parameter value should be final. | 64 |
![]() | Parameter edges should be final. | 64 |
![]() | Parameter messages should be final. | 64 |
![]() | Parameter targetVertexId should be final. | 73 |
![]() | Parameter value should be final. | 73 |
![]() | '+' should be on a new line. | 76 |
![]() | '+' should be on a new line. | 77 |
![]() | Method 'hasEdge' is not designed for extension - needs to be abstract, final or empty. | 86 |
![]() | Parameter targetVertexId should be final. | 87 |
![]() | Method 'getEdges' is not designed for extension - needs to be abstract, final or empty. | 97 |
![]() | Parameter edge should be final. | 103 |
![]() | Method 'getEdgeValue' is not designed for extension - needs to be abstract, final or empty. | 109 |
![]() | Parameter targetVertexId should be final. | 110 |
![]() | Method 'getNumEdges' is not designed for extension - needs to be abstract, final or empty. | 114 |
![]() | Method 'removeEdge' is not designed for extension - needs to be abstract, final or empty. | 119 |
![]() | Parameter targetVertexId should be final. | 120 |
![]() | Parameter message should be final. | 125 |
![]() | Method 'putMessages' is not designed for extension - needs to be abstract, final or empty. | 131 |
![]() | Parameter messages should be final. | 132 |
![]() | Method 'getMessages' is not designed for extension - needs to be abstract, final or empty. | 137 |
![]() | Method 'getNumMessages' is not designed for extension - needs to be abstract, final or empty. | 142 |
![]() | Parameter in should be final. | 148 |
![]() | Parameter out should be final. | 182 |
![]() | Method 'releaseResources' is not designed for extension - needs to be abstract, final or empty. | 200 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 57 |
![]() | Variable 'edgeMap' must be private and have accessor methods. | 58 |
![]() | First sentence should end with a period. | 59 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 62 |
![]() | Parameter id should be final. | 64 |
![]() | Parameter value should be final. | 64 |
![]() | Parameter edges should be final. | 64 |
![]() | Parameter messages should be final. | 64 |
![]() | Parameter targetVertexId should be final. | 73 |
![]() | Parameter value should be final. | 73 |
![]() | '+' should be on a new line. | 76 |
![]() | '+' should be on a new line. | 77 |
![]() | Method 'hasEdge' is not designed for extension - needs to be abstract, final or empty. | 86 |
![]() | Parameter targetVertexId should be final. | 87 |
![]() | Method 'getEdges' is not designed for extension - needs to be abstract, final or empty. | 97 |
![]() | Parameter edge should be final. | 103 |
![]() | Method 'getEdgeValue' is not designed for extension - needs to be abstract, final or empty. | 109 |
![]() | Parameter targetVertexId should be final. | 110 |
![]() | Method 'getNumEdges' is not designed for extension - needs to be abstract, final or empty. | 114 |
![]() | Method 'removeEdge' is not designed for extension - needs to be abstract, final or empty. | 119 |
![]() | Parameter targetVertexId should be final. | 120 |
![]() | Parameter message should be final. | 125 |
![]() | Method 'putMessages' is not designed for extension - needs to be abstract, final or empty. | 131 |
![]() | Parameter messages should be final. | 132 |
![]() | Method 'getMessages' is not designed for extension - needs to be abstract, final or empty. | 137 |
![]() | Method 'getNumMessages' is not designed for extension - needs to be abstract, final or empty. | 142 |
![]() | Parameter in should be final. | 148 |
![]() | Parameter out should be final. | 182 |
![]() | Method 'releaseResources' is not designed for extension - needs to be abstract, final or empty. | 200 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 40 |
![]() | First sentence should end with a period. | 42 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 45 |
![]() | Parameter id should be final. | 46 |
![]() | Parameter value should be final. | 46 |
![]() | Parameter edges should be final. | 47 |
![]() | Parameter messages should be final. | 48 |
![]() | 'messages' hides a field. | 48 |
![]() | Avoid inline conditionals. | 50 |
![]() | Avoid inline conditionals. | 57 |
![]() | Method 'getNeighbors' is not designed for extension - needs to be abstract, final or empty. | 66 |
![]() | Method 'hasEdge' is not designed for extension - needs to be abstract, final or empty. | 76 |
![]() | Parameter targetVertexId should be final. | 77 |
![]() | Method 'getNumEdges' is not designed for extension - needs to be abstract, final or empty. | 86 |
![]() | Method 'getMessages' is not designed for extension - needs to be abstract, final or empty. | 91 |
![]() | Method 'putMessages' is not designed for extension - needs to be abstract, final or empty. | 101 |
![]() | Parameter newMessages should be final. | 102 |
![]() | Method 'getNumMessages' is not designed for extension - needs to be abstract, final or empty. | 110 |
![]() | Method 'releaseResources' is not designed for extension - needs to be abstract, final or empty. | 115 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 120 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 135 |
![]() | Parameter in should be final. | 136 |
![]() | First sentence should end with a period. | 40 |
![]() | First sentence should end with a period. | 42 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 45 |
![]() | Parameter id should be final. | 46 |
![]() | Parameter value should be final. | 46 |
![]() | Parameter edges should be final. | 47 |
![]() | Parameter messages should be final. | 48 |
![]() | 'messages' hides a field. | 48 |
![]() | Avoid inline conditionals. | 50 |
![]() | Avoid inline conditionals. | 57 |
![]() | Method 'getNeighbors' is not designed for extension - needs to be abstract, final or empty. | 66 |
![]() | Method 'hasEdge' is not designed for extension - needs to be abstract, final or empty. | 76 |
![]() | Parameter targetVertexId should be final. | 77 |
![]() | Method 'getNumEdges' is not designed for extension - needs to be abstract, final or empty. | 86 |
![]() | Method 'getMessages' is not designed for extension - needs to be abstract, final or empty. | 91 |
![]() | Method 'putMessages' is not designed for extension - needs to be abstract, final or empty. | 101 |
![]() | Parameter newMessages should be final. | 102 |
![]() | Method 'getNumMessages' is not designed for extension - needs to be abstract, final or empty. | 110 |
![]() | Method 'releaseResources' is not designed for extension - needs to be abstract, final or empty. | 115 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 120 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 135 |
![]() | Parameter in should be final. | 136 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 49 |
![]() | First sentence should end with a period. | 51 |
![]() | First sentence should end with a period. | 53 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 58 |
![]() | 'zooKeeper' hides a field. | 65 |
![]() | Parameter pathList should be final. | 66 |
![]() | 'pathList' hides a field. | 66 |
![]() | 'hostName' hides a field. | 66 |
![]() | '19' is a magic number. | 106 |
![]() | Avoid inline conditionals. | 108 |
![]() | Parameter zkSplitPath should be final. | 120 |
![]() | Expected @throws tag for 'IOException'. | 121 |
![]() | Expected @throws tag for 'KeeperException'. | 121 |
![]() | Expected @throws tag for 'InterruptedException'. | 121 |
![]() | First sentence should end with a period. | 129 |
![]() | Method 'iterator' is not designed for extension - needs to be abstract, final or empty. | 133 |
![]() | First sentence should end with a period. | 141 |
![]() | Method 'hasNext' is not designed for extension - needs to be abstract, final or empty. | 148 |
![]() | First sentence should end with a period. | 153 |
![]() | Method 'next' is not designed for extension - needs to be abstract, final or empty. | 156 |
![]() | Method 'remove' is not designed for extension - needs to be abstract, final or empty. | 162 |
![]() | First sentence should end with a period. | 49 |
![]() | First sentence should end with a period. | 51 |
![]() | First sentence should end with a period. | 53 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 58 |
![]() | 'zooKeeper' hides a field. | 65 |
![]() | Parameter pathList should be final. | 66 |
![]() | 'pathList' hides a field. | 66 |
![]() | 'hostName' hides a field. | 66 |
![]() | '19' is a magic number. | 106 |
![]() | Avoid inline conditionals. | 108 |
![]() | Parameter zkSplitPath should be final. | 120 |
![]() | Expected @throws tag for 'IOException'. | 121 |
![]() | Expected @throws tag for 'KeeperException'. | 121 |
![]() | Expected @throws tag for 'InterruptedException'. | 121 |
![]() | First sentence should end with a period. | 129 |
![]() | Method 'iterator' is not designed for extension - needs to be abstract, final or empty. | 133 |
![]() | First sentence should end with a period. | 141 |
![]() | Method 'hasNext' is not designed for extension - needs to be abstract, final or empty. | 148 |
![]() | First sentence should end with a period. | 153 |
![]() | Method 'next' is not designed for extension - needs to be abstract, final or empty. | 156 |
![]() | Method 'remove' is not designed for extension - needs to be abstract, final or empty. | 162 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 37 |
![]() | First sentence should end with a period. | 44 |
![]() | First sentence should end with a period. | 47 |
![]() | First sentence should end with a period. | 50 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 53 |
![]() | Parameter id should be final. | 54 |
![]() | Parameter value should be final. | 54 |
![]() | Parameter edges should be final. | 55 |
![]() | Parameter messages should be final. | 56 |
![]() | ':' should be on a new line. | 59 |
![]() | Parameter targetId should be final. | 73 |
![]() | Parameter edgeValue should be final. | 74 |
![]() | '+' should be on a new line. | 77 |
![]() | '+' should be on a new line. | 78 |
![]() | Method 'removeEdge' is not designed for extension - needs to be abstract, final or empty. | 87 |
![]() | Parameter targetVertexId should be final. | 88 |
![]() | Method 'getEdges' is not designed for extension - needs to be abstract, final or empty. | 99 |
![]() | Method 'hasEdge' is not designed for extension - needs to be abstract, final or empty. | 133 |
![]() | Parameter targetVertexId should be final. | 134 |
![]() | Method 'getNumEdges' is not designed for extension - needs to be abstract, final or empty. | 138 |
![]() | Parameter in should be final. | 144 |
![]() | Parameter destVertexId should be final. | 173 |
![]() | Parameter edgeValue should be final. | 173 |
![]() | Parameter message should be final. | 187 |
![]() | Method 'putMessages' is not designed for extension - needs to be abstract, final or empty. | 200 |
![]() | Parameter messages should be final. | 201 |
![]() | Method 'releaseResources' is not designed for extension - needs to be abstract, final or empty. | 208 |
![]() | Method 'getNumMessages' is not designed for extension - needs to be abstract, final or empty. | 214 |
![]() | Method 'getMessages' is not designed for extension - needs to be abstract, final or empty. | 219 |
![]() | First sentence should end with a period. | 229 |
![]() | Parameter elementList should be final. | 238 |
![]() | 'elementList' hides a field. | 238 |
![]() | First sentence should end with a period. | 254 |
![]() | First sentence should end with a period. | 256 |
![]() | Parameter elementList should be final. | 264 |
![]() | 'elementList' hides a field. | 264 |
![]() | First sentence should end with a period. | 37 |
![]() | First sentence should end with a period. | 44 |
![]() | First sentence should end with a period. | 47 |
![]() | First sentence should end with a period. | 50 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 53 |
![]() | Parameter id should be final. | 54 |
![]() | Parameter value should be final. | 54 |
![]() | Parameter edges should be final. | 55 |
![]() | Parameter messages should be final. | 56 |
![]() | ':' should be on a new line. | 59 |
![]() | Parameter targetId should be final. | 73 |
![]() | Parameter edgeValue should be final. | 74 |
![]() | '+' should be on a new line. | 77 |
![]() | '+' should be on a new line. | 78 |
![]() | Method 'removeEdge' is not designed for extension - needs to be abstract, final or empty. | 87 |
![]() | Parameter targetVertexId should be final. | 88 |
![]() | Method 'getEdges' is not designed for extension - needs to be abstract, final or empty. | 99 |
![]() | Method 'hasEdge' is not designed for extension - needs to be abstract, final or empty. | 133 |
![]() | Parameter targetVertexId should be final. | 134 |
![]() | Method 'getNumEdges' is not designed for extension - needs to be abstract, final or empty. | 138 |
![]() | Parameter in should be final. | 144 |
![]() | Parameter destVertexId should be final. | 173 |
![]() | Parameter edgeValue should be final. | 173 |
![]() | Parameter message should be final. | 187 |
![]() | Method 'putMessages' is not designed for extension - needs to be abstract, final or empty. | 200 |
![]() | Parameter messages should be final. | 201 |
![]() | Method 'releaseResources' is not designed for extension - needs to be abstract, final or empty. | 208 |
![]() | Method 'getNumMessages' is not designed for extension - needs to be abstract, final or empty. | 214 |
![]() | Method 'getMessages' is not designed for extension - needs to be abstract, final or empty. | 219 |
![]() | First sentence should end with a period. | 229 |
![]() | Parameter elementList should be final. | 238 |
![]() | 'elementList' hides a field. | 238 |
![]() | First sentence should end with a period. | 254 |
![]() | First sentence should end with a period. | 256 |
![]() | Parameter elementList should be final. | 264 |
![]() | 'elementList' hides a field. | 264 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 23 |
![]() | Expected @throws tag for 'InstantiationException'. | 38 |
![]() | Expected @throws tag for 'IllegalAccessException'. | 38 |
![]() | Expected @throws tag for 'InstantiationException'. | 52 |
![]() | Expected @throws tag for 'IllegalAccessException'. | 52 |
![]() | First sentence should end with a period. | 23 |
![]() | Expected @throws tag for 'InstantiationException'. | 38 |
![]() | Expected @throws tag for 'IllegalAccessException'. | 38 |
![]() | Expected @throws tag for 'InstantiationException'. | 52 |
![]() | Expected @throws tag for 'IllegalAccessException'. | 52 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 47 |
![]() | First sentence should end with a period. | 49 |
![]() | Expected @throws tag for 'InstantiationException'. | 61 |
![]() | Expected @throws tag for 'IllegalAccessException'. | 62 |
![]() | Method 'getSuperstep' is not designed for extension - needs to be abstract, final or empty. | 69 |
![]() | Method 'getTotalNumVertices' is not designed for extension - needs to be abstract, final or empty. | 79 |
![]() | Method 'getTotalNumEdges' is not designed for extension - needs to be abstract, final or empty. | 89 |
![]() | Method 'haltComputation' is not designed for extension - needs to be abstract, final or empty. | 97 |
![]() | Method 'isHalted' is not designed for extension - needs to be abstract, final or empty. | 106 |
![]() | Method 'getGraphState' is not designed for extension - needs to be abstract, final or empty. | 115 |
![]() | First sentence should end with a period. | 119 |
![]() | Method 'setGraphState' is not designed for extension - needs to be abstract, final or empty. | 124 |
![]() | Parameter graphState should be final. | 124 |
![]() | 'graphState' hides a field. | 124 |
![]() | First sentence should end with a period. | 128 |
![]() | Method 'getContext' is not designed for extension - needs to be abstract, final or empty. | 133 |
![]() | Parameter name should be final. | 139 |
![]() | Parameter aggregatorClass should be final. | 139 |
![]() | Parameter name should be final. | 147 |
![]() | Parameter aggregatorClass should be final. | 148 |
![]() | Method 'getAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 154 |
![]() | Parameter name should be final. | 155 |
![]() | Method 'setAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 160 |
![]() | Parameter name should be final. | 161 |
![]() | Parameter value should be final. | 161 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 166 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 171 |
![]() | Parameter conf should be final. | 172 |
![]() | 'conf' hides a field. | 172 |
![]() | First sentence should end with a period. | 47 |
![]() | First sentence should end with a period. | 49 |
![]() | Expected @throws tag for 'InstantiationException'. | 61 |
![]() | Expected @throws tag for 'IllegalAccessException'. | 62 |
![]() | Method 'getSuperstep' is not designed for extension - needs to be abstract, final or empty. | 69 |
![]() | Method 'getTotalNumVertices' is not designed for extension - needs to be abstract, final or empty. | 79 |
![]() | Method 'getTotalNumEdges' is not designed for extension - needs to be abstract, final or empty. | 89 |
![]() | Method 'haltComputation' is not designed for extension - needs to be abstract, final or empty. | 97 |
![]() | Method 'isHalted' is not designed for extension - needs to be abstract, final or empty. | 106 |
![]() | Method 'getGraphState' is not designed for extension - needs to be abstract, final or empty. | 115 |
![]() | First sentence should end with a period. | 119 |
![]() | Method 'setGraphState' is not designed for extension - needs to be abstract, final or empty. | 124 |
![]() | Parameter graphState should be final. | 124 |
![]() | 'graphState' hides a field. | 124 |
![]() | First sentence should end with a period. | 128 |
![]() | Method 'getContext' is not designed for extension - needs to be abstract, final or empty. | 133 |
![]() | Parameter name should be final. | 139 |
![]() | Parameter aggregatorClass should be final. | 139 |
![]() | Parameter name should be final. | 147 |
![]() | Parameter aggregatorClass should be final. | 148 |
![]() | Method 'getAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 154 |
![]() | Parameter name should be final. | 155 |
![]() | Method 'setAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 160 |
![]() | Parameter name should be final. | 161 |
![]() | Parameter value should be final. | 161 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 166 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 171 |
![]() | Parameter conf should be final. | 172 |
![]() | 'conf' hides a field. | 172 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 48 |
![]() | First sentence should end with a period. | 50 |
![]() | First sentence should end with a period. | 52 |
![]() | First sentence should end with a period. | 54 |
![]() | First sentence should end with a period. | 58 |
![]() | First sentence should end with a period. | 60 |
![]() | Parameter bspServiceMaster should be final. | 71 |
![]() | 'bspServiceMaster' hides a field. | 71 |
![]() | Parameter context should be final. | 72 |
![]() | 'context' hides a field. | 72 |
![]() | Method 'run' is not designed for extension - needs to be abstract, final or empty. | 86 |
![]() | '!=' should be on a new line. | 98 |
![]() | '||' should be on a new line. | 99 |
![]() | '1000.0d' is a magic number. | 105 |
![]() | '-' should be on a new line. | 112 |
![]() | '1000.0d' is a magic number. | 115 |
![]() | '+' should be on a new line. | 117 |
![]() | '+' should be on a new line. | 118 |
![]() | '1000.0d' is a magic number. | 119 |
![]() | '+' should be on a new line. | 119 |
![]() | '+' should be on a new line. | 120 |
![]() | '+' should be on a new line. | 121 |
![]() | '+' should be on a new line. | 132 |
![]() | '==' should be on a new line. | 158 |
![]() | '+' should be on a new line. | 160 |
![]() | '+' should be on a new line. | 163 |
![]() | '+' should be on a new line. | 169 |
![]() | '/' should be on a new line. | 170 |
![]() | '1000.0d' is a magic number. | 171 |
![]() | '+' should be on a new line. | 172 |
![]() | '/' should be on a new line. | 173 |
![]() | '1000.0d' is a magic number. | 174 |
![]() | '+' should be on a new line. | 182 |
![]() | '+' should be on a new line. | 186 |
![]() | '+' should be on a new line. | 190 |
![]() | First sentence should end with a period. | 48 |
![]() | First sentence should end with a period. | 50 |
![]() | First sentence should end with a period. | 52 |
![]() | First sentence should end with a period. | 54 |
![]() | First sentence should end with a period. | 58 |
![]() | First sentence should end with a period. | 60 |
![]() | Parameter bspServiceMaster should be final. | 71 |
![]() | 'bspServiceMaster' hides a field. | 71 |
![]() | Parameter context should be final. | 72 |
![]() | 'context' hides a field. | 72 |
![]() | Method 'run' is not designed for extension - needs to be abstract, final or empty. | 86 |
![]() | '!=' should be on a new line. | 98 |
![]() | '||' should be on a new line. | 99 |
![]() | '1000.0d' is a magic number. | 105 |
![]() | '-' should be on a new line. | 112 |
![]() | '1000.0d' is a magic number. | 115 |
![]() | '+' should be on a new line. | 117 |
![]() | '+' should be on a new line. | 118 |
![]() | '1000.0d' is a magic number. | 119 |
![]() | '+' should be on a new line. | 119 |
![]() | '+' should be on a new line. | 120 |
![]() | '+' should be on a new line. | 121 |
![]() | '+' should be on a new line. | 132 |
![]() | '==' should be on a new line. | 158 |
![]() | '+' should be on a new line. | 160 |
![]() | '+' should be on a new line. | 163 |
![]() | '+' should be on a new line. | 169 |
![]() | '/' should be on a new line. | 170 |
![]() | '1000.0d' is a magic number. | 171 |
![]() | '+' should be on a new line. | 172 |
![]() | '/' should be on a new line. | 173 |
![]() | '1000.0d' is a magic number. | 174 |
![]() | '+' should be on a new line. | 182 |
![]() | '+' should be on a new line. | 186 |
![]() | '+' should be on a new line. | 190 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 40 |
![]() | Method 'instantiateVertex' is not designed for extension - needs to be abstract, final or empty. | 68 |
![]() | Parameter vertexId should be final. | 69 |
![]() | Parameter vertexValue should be final. | 69 |
![]() | Parameter edges should be final. | 69 |
![]() | Parameter messages should be final. | 69 |
![]() | Method 'addVertexRequest' is not designed for extension - needs to be abstract, final or empty. | 84 |
![]() | Parameter vertex should be final. | 84 |
![]() | Expected @throws tag for 'IOException'. | 85 |
![]() | Method 'removeVertexRequest' is not designed for extension - needs to be abstract, final or empty. | 96 |
![]() | Parameter vertexId should be final. | 96 |
![]() | Expected @throws tag for 'IOException'. | 96 |
![]() | First sentence should end with a period. | 101 |
![]() | Method 'addEdgeRequest' is not designed for extension - needs to be abstract, final or empty. | 108 |
![]() | Parameter sourceVertexId should be final. | 108 |
![]() | Parameter edge should be final. | 108 |
![]() | Expected @throws tag for 'IOException'. | 109 |
![]() | Method 'removeEdgeRequest' is not designed for extension - needs to be abstract, final or empty. | 121 |
![]() | Parameter sourceVertexId should be final. | 121 |
![]() | Parameter targetVertexId should be final. | 121 |
![]() | Expected @throws tag for 'IOException'. | 122 |
![]() | First sentence should end with a period. | 40 |
![]() | Method 'instantiateVertex' is not designed for extension - needs to be abstract, final or empty. | 68 |
![]() | Parameter vertexId should be final. | 69 |
![]() | Parameter vertexValue should be final. | 69 |
![]() | Parameter edges should be final. | 69 |
![]() | Parameter messages should be final. | 69 |
![]() | Method 'addVertexRequest' is not designed for extension - needs to be abstract, final or empty. | 84 |
![]() | Parameter vertex should be final. | 84 |
![]() | Expected @throws tag for 'IOException'. | 85 |
![]() | Method 'removeVertexRequest' is not designed for extension - needs to be abstract, final or empty. | 96 |
![]() | Parameter vertexId should be final. | 96 |
![]() | Expected @throws tag for 'IOException'. | 96 |
![]() | First sentence should end with a period. | 101 |
![]() | Method 'addEdgeRequest' is not designed for extension - needs to be abstract, final or empty. | 108 |
![]() | Parameter sourceVertexId should be final. | 108 |
![]() | Parameter edge should be final. | 108 |
![]() | Expected @throws tag for 'IOException'. | 109 |
![]() | Method 'removeEdgeRequest' is not designed for extension - needs to be abstract, final or empty. | 121 |
![]() | Parameter sourceVertexId should be final. | 121 |
![]() | Parameter targetVertexId should be final. | 121 |
![]() | Expected @throws tag for 'IOException'. | 122 |
Violation | Message | Line |
---|---|---|
![]() | Method 'getEdges' is not designed for extension - needs to be abstract, final or empty. | 53 |
![]() | Parameter targetVertexId should be final. | 57 |
![]() | Method 'getEdgeValue' is not designed for extension - needs to be abstract, final or empty. | 63 |
![]() | Parameter targetVertexId should be final. | 64 |
![]() | First sentence should end with a period. | 68 |
![]() | Method 'addEdge' is not designed for extension - needs to be abstract, final or empty. | 76 |
![]() | Parameter targetVertexId should be final. | 77 |
![]() | Parameter value should be final. | 77 |
![]() | First sentence should end with a period. | 81 |
![]() | Method 'addEdgeRequest' is not designed for extension - needs to be abstract, final or empty. | 87 |
![]() | Parameter sourceVertexId should be final. | 87 |
![]() | Expected @throws tag for 'IOException'. | 87 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 93 |
![]() | Parameter in should be final. | 94 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 125 |
![]() | Parameter out should be final. | 126 |
![]() | Method 'getEdges' is not designed for extension - needs to be abstract, final or empty. | 53 |
![]() | Parameter targetVertexId should be final. | 57 |
![]() | Method 'getEdgeValue' is not designed for extension - needs to be abstract, final or empty. | 63 |
![]() | Parameter targetVertexId should be final. | 64 |
![]() | First sentence should end with a period. | 68 |
![]() | Method 'addEdge' is not designed for extension - needs to be abstract, final or empty. | 76 |
![]() | Parameter targetVertexId should be final. | 77 |
![]() | Parameter value should be final. | 77 |
![]() | First sentence should end with a period. | 81 |
![]() | Method 'addEdgeRequest' is not designed for extension - needs to be abstract, final or empty. | 87 |
![]() | Parameter sourceVertexId should be final. | 87 |
![]() | Expected @throws tag for 'IOException'. | 87 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 93 |
![]() | Parameter in should be final. | 94 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 125 |
![]() | Parameter out should be final. | 126 |
Violation | Message | Line |
---|---|---|
![]() | Method 'getEdges' is not designed for extension - needs to be abstract, final or empty. | 55 |
![]() | Parameter targetVertexId should be final. | 61 |
![]() | Method 'getEdgeValue' is not designed for extension - needs to be abstract, final or empty. | 67 |
![]() | Parameter targetVertexId should be final. | 68 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 72 |
![]() | Parameter in should be final. | 73 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 104 |
![]() | Parameter out should be final. | 105 |
![]() | Method 'getEdges' is not designed for extension - needs to be abstract, final or empty. | 55 |
![]() | Parameter targetVertexId should be final. | 61 |
![]() | Method 'getEdgeValue' is not designed for extension - needs to be abstract, final or empty. | 67 |
![]() | Parameter targetVertexId should be final. | 68 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 72 |
![]() | Parameter in should be final. | 73 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 104 |
![]() | Parameter out should be final. | 105 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 41 |
![]() | First sentence should end with a period. | 43 |
![]() | First sentence should end with a period. | 45 |
![]() | First sentence should end with a period. | 54 |
![]() | First sentence should end with a period. | 56 |
![]() | Variable 'output' must be private and have accessor methods. | 57 |
![]() | First sentence should end with a period. | 58 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 61 |
![]() | Parameter context should be final. | 63 |
![]() | Parameter attempt should be final. | 63 |
![]() | '+' should be on a new line. | 71 |
![]() | Method 'writeAggregator' is not designed for extension - needs to be abstract, final or empty. | 78 |
![]() | Parameter aggregatorMap should be final. | 80 |
![]() | Parameter superstep should be final. | 81 |
![]() | Method 'aggregatorToString' is not designed for extension - needs to be abstract, final or empty. | 101 |
![]() | Parameter aggregatorName should be final. | 101 |
![]() | Parameter value should be final. | 102 |
![]() | Parameter superstep should be final. | 103 |
![]() | Parameter superstep should be final. | 115 |
![]() | '||' should be on a new line. | 116 |
![]() | Method 'close' is not designed for extension - needs to be abstract, final or empty. | 120 |
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 41 |
![]() | First sentence should end with a period. | 43 |
![]() | First sentence should end with a period. | 45 |
![]() | First sentence should end with a period. | 54 |
![]() | First sentence should end with a period. | 56 |
![]() | Variable 'output' must be private and have accessor methods. | 57 |
![]() | First sentence should end with a period. | 58 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 61 |
![]() | Parameter context should be final. | 63 |
![]() | Parameter attempt should be final. | 63 |
![]() | '+' should be on a new line. | 71 |
![]() | Method 'writeAggregator' is not designed for extension - needs to be abstract, final or empty. | 78 |
![]() | Parameter aggregatorMap should be final. | 80 |
![]() | Parameter superstep should be final. | 81 |
![]() | Method 'aggregatorToString' is not designed for extension - needs to be abstract, final or empty. | 101 |
![]() | Parameter aggregatorName should be final. | 101 |
![]() | Parameter value should be final. | 102 |
![]() | Parameter superstep should be final. | 103 |
![]() | Parameter superstep should be final. | 115 |
![]() | '||' should be on a new line. | 116 |
![]() | Method 'close' is not designed for extension - needs to be abstract, final or empty. | 120 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 57 |
![]() | 'id' hides a field. | 71 |
![]() | 'value' hides a field. | 71 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 80 |
![]() | Parameter id should be final. | 80 |
![]() | 'id' hides a field. | 80 |
![]() | Parameter value should be final. | 80 |
![]() | 'value' hides a field. | 80 |
![]() | Expected @throws tag for 'IOException'. | 92 |
![]() | Method 'getSuperstep' is not designed for extension - needs to be abstract, final or empty. | 99 |
![]() | Method 'getId' is not designed for extension - needs to be abstract, final or empty. | 108 |
![]() | First sentence should end with a period. | 112 |
![]() | Method 'getValue' is not designed for extension - needs to be abstract, final or empty. | 117 |
![]() | First sentence should end with a period. | 121 |
![]() | Method 'setValue' is not designed for extension - needs to be abstract, final or empty. | 126 |
![]() | Parameter value should be final. | 126 |
![]() | 'value' hides a field. | 126 |
![]() | Method 'getTotalNumVertices' is not designed for extension - needs to be abstract, final or empty. | 136 |
![]() | Method 'getTotalNumEdges' is not designed for extension - needs to be abstract, final or empty. | 146 |
![]() | Method 'hasEdge' is not designed for extension - needs to be abstract, final or empty. | 163 |
![]() | Parameter targetVertexId should be final. | 163 |
![]() | Method 'getEdgeValue' is not designed for extension - needs to be abstract, final or empty. | 180 |
![]() | Parameter targetVertexId should be final. | 180 |
![]() | Method 'getNumEdges' is not designed for extension - needs to be abstract, final or empty. | 194 |
![]() | Method 'sendMessage' is not designed for extension - needs to be abstract, final or empty. | 206 |
![]() | Parameter id should be final. | 206 |
![]() | 'id' hides a field. | 206 |
![]() | Parameter message should be final. | 206 |
![]() | Method 'sendMessageToAllEdges' is not designed for extension - needs to be abstract, final or empty. | 220 |
![]() | Parameter message should be final. | 220 |
![]() | Method 'voteToHalt' is not designed for extension - needs to be abstract, final or empty. | 232 |
![]() | Method 'wakeUp' is not designed for extension - needs to be abstract, final or empty. | 239 |
![]() | Method 'isHalted' is not designed for extension - needs to be abstract, final or empty. | 248 |
![]() | Method 'getNumMessages' is not designed for extension - needs to be abstract, final or empty. | 264 |
![]() | First sentence should end with a period. | 268 |
![]() | First sentence should end with a period. | 275 |
![]() | Method 'getGraphState' is not designed for extension - needs to be abstract, final or empty. | 286 |
![]() | First sentence should end with a period. | 290 |
![]() | Method 'setGraphState' is not designed for extension - needs to be abstract, final or empty. | 295 |
![]() | Parameter graphState should be final. | 295 |
![]() | 'graphState' hides a field. | 295 |
![]() | First sentence should end with a period. | 299 |
![]() | Method 'getContext' is not designed for extension - needs to be abstract, final or empty. | 304 |
![]() | First sentence should end with a period. | 308 |
![]() | Method 'getWorkerContext' is not designed for extension - needs to be abstract, final or empty. | 313 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 317 |
![]() | Parameter name should be final. | 318 |
![]() | Parameter value should be final. | 318 |
![]() | 'value' hides a field. | 318 |
![]() | Method 'getAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 323 |
![]() | Parameter name should be final. | 324 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 329 |
![]() | Parameter in should be final. | 330 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 358 |
![]() | Parameter out should be final. | 359 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 377 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 382 |
![]() | Parameter conf should be final. | 383 |
![]() | 'conf' hides a field. | 383 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 387 |
![]() | '+' should be on a new line. | 389 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 57 |
![]() | 'id' hides a field. | 71 |
![]() | 'value' hides a field. | 71 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 80 |
![]() | Parameter id should be final. | 80 |
![]() | 'id' hides a field. | 80 |
![]() | Parameter value should be final. | 80 |
![]() | 'value' hides a field. | 80 |
![]() | Expected @throws tag for 'IOException'. | 92 |
![]() | Method 'getSuperstep' is not designed for extension - needs to be abstract, final or empty. | 99 |
![]() | Method 'getId' is not designed for extension - needs to be abstract, final or empty. | 108 |
![]() | First sentence should end with a period. | 112 |
![]() | Method 'getValue' is not designed for extension - needs to be abstract, final or empty. | 117 |
![]() | First sentence should end with a period. | 121 |
![]() | Method 'setValue' is not designed for extension - needs to be abstract, final or empty. | 126 |
![]() | Parameter value should be final. | 126 |
![]() | 'value' hides a field. | 126 |
![]() | Method 'getTotalNumVertices' is not designed for extension - needs to be abstract, final or empty. | 136 |
![]() | Method 'getTotalNumEdges' is not designed for extension - needs to be abstract, final or empty. | 146 |
![]() | Method 'hasEdge' is not designed for extension - needs to be abstract, final or empty. | 163 |
![]() | Parameter targetVertexId should be final. | 163 |
![]() | Method 'getEdgeValue' is not designed for extension - needs to be abstract, final or empty. | 180 |
![]() | Parameter targetVertexId should be final. | 180 |
![]() | Method 'getNumEdges' is not designed for extension - needs to be abstract, final or empty. | 194 |
![]() | Method 'sendMessage' is not designed for extension - needs to be abstract, final or empty. | 206 |
![]() | Parameter id should be final. | 206 |
![]() | 'id' hides a field. | 206 |
![]() | Parameter message should be final. | 206 |
![]() | Method 'sendMessageToAllEdges' is not designed for extension - needs to be abstract, final or empty. | 220 |
![]() | Parameter message should be final. | 220 |
![]() | Method 'voteToHalt' is not designed for extension - needs to be abstract, final or empty. | 232 |
![]() | Method 'wakeUp' is not designed for extension - needs to be abstract, final or empty. | 239 |
![]() | Method 'isHalted' is not designed for extension - needs to be abstract, final or empty. | 248 |
![]() | Method 'getNumMessages' is not designed for extension - needs to be abstract, final or empty. | 264 |
![]() | First sentence should end with a period. | 268 |
![]() | First sentence should end with a period. | 275 |
![]() | Method 'getGraphState' is not designed for extension - needs to be abstract, final or empty. | 286 |
![]() | First sentence should end with a period. | 290 |
![]() | Method 'setGraphState' is not designed for extension - needs to be abstract, final or empty. | 295 |
![]() | Parameter graphState should be final. | 295 |
![]() | 'graphState' hides a field. | 295 |
![]() | First sentence should end with a period. | 299 |
![]() | Method 'getContext' is not designed for extension - needs to be abstract, final or empty. | 304 |
![]() | First sentence should end with a period. | 308 |
![]() | Method 'getWorkerContext' is not designed for extension - needs to be abstract, final or empty. | 313 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 317 |
![]() | Parameter name should be final. | 318 |
![]() | Parameter value should be final. | 318 |
![]() | 'value' hides a field. | 318 |
![]() | Method 'getAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 323 |
![]() | Parameter name should be final. | 324 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 329 |
![]() | Parameter in should be final. | 330 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 358 |
![]() | Parameter out should be final. | 359 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 377 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 382 |
![]() | Parameter conf should be final. | 383 |
![]() | 'conf' hides a field. | 383 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 387 |
![]() | '+' should be on a new line. | 389 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 54 |
![]() | First sentence should end with a period. | 54 |
Violation | Message | Line |
---|---|---|
![]() | Expected @throws tag for 'IOException'. | 46 |
![]() | Expected @throws tag for 'IOException'. | 46 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 25 |
![]() | First sentence should end with a period. | 27 |
![]() | Parameter vertexCount should be final. | 44 |
![]() | 'vertexCount' hides a field. | 44 |
![]() | Parameter edgeCount should be final. | 44 |
![]() | 'edgeCount' hides a field. | 44 |
![]() | Method 'getVertexCount' is not designed for extension - needs to be abstract, final or empty. | 49 |
![]() | Missing a Javadoc comment. | 49 |
![]() | Method 'getEdgeCount' is not designed for extension - needs to be abstract, final or empty. | 53 |
![]() | Missing a Javadoc comment. | 53 |
![]() | Method 'incrVertexEdgeCount' is not designed for extension - needs to be abstract, final or empty. | 63 |
![]() | Parameter vertexEdgeCount should be final. | 64 |
![]() | Method 'incrVertexEdgeCount' is not designed for extension - needs to be abstract, final or empty. | 77 |
![]() | Parameter vertexCount should be final. | 78 |
![]() | 'vertexCount' hides a field. | 78 |
![]() | Parameter edgeCount should be final. | 78 |
![]() | 'edgeCount' hides a field. | 78 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 84 |
![]() | First sentence should end with a period. | 25 |
![]() | First sentence should end with a period. | 27 |
![]() | Parameter vertexCount should be final. | 44 |
![]() | 'vertexCount' hides a field. | 44 |
![]() | Parameter edgeCount should be final. | 44 |
![]() | 'edgeCount' hides a field. | 44 |
![]() | Method 'getVertexCount' is not designed for extension - needs to be abstract, final or empty. | 49 |
![]() | Missing a Javadoc comment. | 49 |
![]() | Method 'getEdgeCount' is not designed for extension - needs to be abstract, final or empty. | 53 |
![]() | Missing a Javadoc comment. | 53 |
![]() | Method 'incrVertexEdgeCount' is not designed for extension - needs to be abstract, final or empty. | 63 |
![]() | Parameter vertexEdgeCount should be final. | 64 |
![]() | Method 'incrVertexEdgeCount' is not designed for extension - needs to be abstract, final or empty. | 77 |
![]() | Parameter vertexCount should be final. | 78 |
![]() | 'vertexCount' hides a field. | 78 |
![]() | Parameter edgeCount should be final. | 78 |
![]() | 'edgeCount' hides a field. | 78 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 84 |
Violation | Message | Line |
---|---|---|
![]() | Expected @throws tag for 'IOException'. | 64 |
![]() | Expected @throws tag for 'InterruptedException'. | 64 |
![]() | Expected @throws tag for 'IOException'. | 79 |
![]() | Expected @throws tag for 'IOException'. | 64 |
![]() | Expected @throws tag for 'InterruptedException'. | 64 |
![]() | Expected @throws tag for 'IOException'. | 79 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 48 |
![]() | First sentence should end with a period. | 51 |
![]() | First sentence should end with a period. | 53 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 57 |
![]() | Method 'copy' is not designed for extension - needs to be abstract, final or empty. | 65 |
![]() | Method 'getAddedVertexList' is not designed for extension - needs to be abstract, final or empty. | 75 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 80 |
![]() | Parameter input should be final. | 81 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 109 |
![]() | Parameter output should be final. | 110 |
![]() | First sentence should end with a period. | 127 |
![]() | Method 'addVertex' is not designed for extension - needs to be abstract, final or empty. | 132 |
![]() | Parameter vertex should be final. | 132 |
![]() | Method 'getRemovedVertexCount' is not designed for extension - needs to be abstract, final or empty. | 136 |
![]() | First sentence should end with a period. | 141 |
![]() | Method 'removeVertex' is not designed for extension - needs to be abstract, final or empty. | 144 |
![]() | Method 'getAddedEdgeList' is not designed for extension - needs to be abstract, final or empty. | 148 |
![]() | First sentence should end with a period. | 153 |
![]() | Method 'addEdge' is not designed for extension - needs to be abstract, final or empty. | 158 |
![]() | Parameter edge should be final. | 158 |
![]() | Method 'getRemovedEdgeList' is not designed for extension - needs to be abstract, final or empty. | 162 |
![]() | First sentence should end with a period. | 167 |
![]() | Method 'removeEdge' is not designed for extension - needs to be abstract, final or empty. | 172 |
![]() | Parameter destinationVertexId should be final. | 172 |
![]() | First sentence should end with a period. | 176 |
![]() | Method 'addVertexMutations' is not designed for extension - needs to be abstract, final or empty. | 181 |
![]() | Parameter vertexMutations should be final. | 181 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 188 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 203 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 208 |
![]() | Parameter conf should be final. | 209 |
![]() | 'conf' hides a field. | 209 |
![]() | First sentence should end with a period. | 48 |
![]() | First sentence should end with a period. | 51 |
![]() | First sentence should end with a period. | 53 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 57 |
![]() | Method 'copy' is not designed for extension - needs to be abstract, final or empty. | 65 |
![]() | Method 'getAddedVertexList' is not designed for extension - needs to be abstract, final or empty. | 75 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 80 |
![]() | Parameter input should be final. | 81 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 109 |
![]() | Parameter output should be final. | 110 |
![]() | First sentence should end with a period. | 127 |
![]() | Method 'addVertex' is not designed for extension - needs to be abstract, final or empty. | 132 |
![]() | Parameter vertex should be final. | 132 |
![]() | Method 'getRemovedVertexCount' is not designed for extension - needs to be abstract, final or empty. | 136 |
![]() | First sentence should end with a period. | 141 |
![]() | Method 'removeVertex' is not designed for extension - needs to be abstract, final or empty. | 144 |
![]() | Method 'getAddedEdgeList' is not designed for extension - needs to be abstract, final or empty. | 148 |
![]() | First sentence should end with a period. | 153 |
![]() | Method 'addEdge' is not designed for extension - needs to be abstract, final or empty. | 158 |
![]() | Parameter edge should be final. | 158 |
![]() | Method 'getRemovedEdgeList' is not designed for extension - needs to be abstract, final or empty. | 162 |
![]() | First sentence should end with a period. | 167 |
![]() | Method 'removeEdge' is not designed for extension - needs to be abstract, final or empty. | 172 |
![]() | Parameter destinationVertexId should be final. | 172 |
![]() | First sentence should end with a period. | 176 |
![]() | Method 'addVertexMutations' is not designed for extension - needs to be abstract, final or empty. | 181 |
![]() | Parameter vertexMutations should be final. | 181 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 188 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 203 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 208 |
![]() | Parameter conf should be final. | 209 |
![]() | 'conf' hides a field. | 209 |
Violation | Message | Line |
---|---|---|
![]() | Expected @throws tag for 'IOException'. | 52 |
![]() | Expected @throws tag for 'InterruptedException'. | 52 |
![]() | Expected @throws tag for 'InterruptedException'. | 67 |
![]() | Expected @throws tag for 'IOException'. | 80 |
![]() | Expected @throws tag for 'InterruptedException'. | 80 |
![]() | Expected @throws tag for 'IOException'. | 52 |
![]() | Expected @throws tag for 'InterruptedException'. | 52 |
![]() | Expected @throws tag for 'InterruptedException'. | 67 |
![]() | Expected @throws tag for 'IOException'. | 80 |
![]() | Expected @throws tag for 'InterruptedException'. | 80 |
Violation | Message | Line |
---|---|---|
![]() | Expected @throws tag for 'IOException'. | 50 |
![]() | Expected @throws tag for 'InterruptedException'. | 50 |
![]() | Expected @throws tag for 'IOException'. | 58 |
![]() | Expected @throws tag for 'InterruptedException'. | 58 |
![]() | Expected @throws tag for 'IOException'. | 69 |
![]() | Expected @throws tag for 'InterruptedException'. | 69 |
![]() | Expected @throws tag for 'IOException'. | 76 |
![]() | Expected @throws tag for 'IOException'. | 86 |
![]() | Expected @throws tag for 'InterruptedException'. | 86 |
![]() | Expected @throws tag for 'IOException'. | 50 |
![]() | Expected @throws tag for 'InterruptedException'. | 50 |
![]() | Expected @throws tag for 'IOException'. | 58 |
![]() | Expected @throws tag for 'InterruptedException'. | 58 |
![]() | Expected @throws tag for 'IOException'. | 69 |
![]() | Expected @throws tag for 'InterruptedException'. | 69 |
![]() | Expected @throws tag for 'IOException'. | 76 |
![]() | Expected @throws tag for 'IOException'. | 86 |
![]() | Expected @throws tag for 'InterruptedException'. | 86 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 42 |
![]() | First sentence should end with a period. | 44 |
![]() | First sentence should end with a period. | 46 |
![]() | Method 'resolve' is not designed for extension - needs to be abstract, final or empty. | 49 |
![]() | Parameter vertexId should be final. | 51 |
![]() | Parameter vertex should be final. | 52 |
![]() | Parameter vertexChanges should be final. | 53 |
![]() | Parameter hasMessages should be final. | 54 |
![]() | '+' should be on a new line. | 69 |
![]() | '+' should be on a new line. | 70 |
![]() | '&&' should be on a new line. | 94 |
![]() | '+' should be on a new line. | 96 |
![]() | '+' should be on a new line. | 97 |
![]() | '&&' should be on a new line. | 102 |
![]() | Method 'instantiateVertex' is not designed for extension - needs to be abstract, final or empty. | 115 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 123 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 128 |
![]() | Parameter conf should be final. | 129 |
![]() | 'conf' hides a field. | 129 |
![]() | Method 'setGraphState' is not designed for extension - needs to be abstract, final or empty. | 138 |
![]() | Parameter graphState should be final. | 138 |
![]() | 'graphState' hides a field. | 138 |
![]() | First sentence should end with a period. | 42 |
![]() | First sentence should end with a period. | 44 |
![]() | First sentence should end with a period. | 46 |
![]() | Method 'resolve' is not designed for extension - needs to be abstract, final or empty. | 49 |
![]() | Parameter vertexId should be final. | 51 |
![]() | Parameter vertex should be final. | 52 |
![]() | Parameter vertexChanges should be final. | 53 |
![]() | Parameter hasMessages should be final. | 54 |
![]() | '+' should be on a new line. | 69 |
![]() | '+' should be on a new line. | 70 |
![]() | '&&' should be on a new line. | 94 |
![]() | '+' should be on a new line. | 96 |
![]() | '+' should be on a new line. | 97 |
![]() | '&&' should be on a new line. | 102 |
![]() | Method 'instantiateVertex' is not designed for extension - needs to be abstract, final or empty. | 115 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 123 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 128 |
![]() | Parameter conf should be final. | 129 |
![]() | 'conf' hides a field. | 129 |
![]() | Method 'setGraphState' is not designed for extension - needs to be abstract, final or empty. | 138 |
![]() | Parameter graphState should be final. | 138 |
![]() | 'graphState' hides a field. | 138 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 27 |
![]() | Expected @throws tag for 'IOException'. | 44 |
![]() | First sentence should end with a period. | 46 |
![]() | Expected @throws tag for 'IOException'. | 54 |
![]() | Expected @throws tag for 'InterruptedException'. | 54 |
![]() | Expected @throws tag for 'IOException'. | 64 |
![]() | Expected @throws tag for 'InterruptedException'. | 64 |
![]() | First sentence should end with a period. | 27 |
![]() | Expected @throws tag for 'IOException'. | 44 |
![]() | First sentence should end with a period. | 46 |
![]() | Expected @throws tag for 'IOException'. | 54 |
![]() | Expected @throws tag for 'InterruptedException'. | 54 |
![]() | Expected @throws tag for 'IOException'. | 64 |
![]() | Expected @throws tag for 'InterruptedException'. | 64 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 23 |
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 23 |
![]() | First sentence should end with a period. | 27 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 30 |
![]() | Method 'setGraphState' is not designed for extension - needs to be abstract, final or empty. | 38 |
![]() | Parameter graphState should be final. | 38 |
![]() | 'graphState' hides a field. | 38 |
![]() | Method 'getSuperstep' is not designed for extension - needs to be abstract, final or empty. | 79 |
![]() | Method 'getTotalNumVertices' is not designed for extension - needs to be abstract, final or empty. | 89 |
![]() | Method 'getTotalNumEdges' is not designed for extension - needs to be abstract, final or empty. | 99 |
![]() | First sentence should end with a period. | 103 |
![]() | Method 'getContext' is not designed for extension - needs to be abstract, final or empty. | 108 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 112 |
![]() | Parameter name should be final. | 113 |
![]() | Parameter value should be final. | 113 |
![]() | Method 'getAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 118 |
![]() | Parameter name should be final. | 119 |
![]() | First sentence should end with a period. | 30 |
![]() | Method 'setGraphState' is not designed for extension - needs to be abstract, final or empty. | 38 |
![]() | Parameter graphState should be final. | 38 |
![]() | 'graphState' hides a field. | 38 |
![]() | Method 'getSuperstep' is not designed for extension - needs to be abstract, final or empty. | 79 |
![]() | Method 'getTotalNumVertices' is not designed for extension - needs to be abstract, final or empty. | 89 |
![]() | Method 'getTotalNumEdges' is not designed for extension - needs to be abstract, final or empty. | 99 |
![]() | First sentence should end with a period. | 103 |
![]() | Method 'getContext' is not designed for extension - needs to be abstract, final or empty. | 108 |
![]() | Method 'aggregate' is not designed for extension - needs to be abstract, final or empty. | 112 |
![]() | Parameter name should be final. | 113 |
![]() | Parameter value should be final. | 113 |
![]() | Method 'getAggregatedValue' is not designed for extension - needs to be abstract, final or empty. | 118 |
![]() | Parameter name should be final. | 119 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 32 |
![]() | First sentence should end with a period. | 34 |
![]() | First sentence should end with a period. | 36 |
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 41 |
![]() | Parameter hostname should be final. | 54 |
![]() | 'hostname' hides a field. | 54 |
![]() | Parameter partitionId should be final. | 54 |
![]() | 'partitionId' hides a field. | 54 |
![]() | Parameter port should be final. | 54 |
![]() | 'port' hides a field. | 54 |
![]() | Method 'getHostname' is not designed for extension - needs to be abstract, final or empty. | 61 |
![]() | Missing a Javadoc comment. | 61 |
![]() | Method 'getPartitionId' is not designed for extension - needs to be abstract, final or empty. | 65 |
![]() | Missing a Javadoc comment. | 65 |
![]() | Method 'getHostnameId' is not designed for extension - needs to be abstract, final or empty. | 69 |
![]() | Missing a Javadoc comment. | 69 |
![]() | First sentence should end with a period. | 73 |
![]() | Method 'getInetSocketAddress' is not designed for extension - needs to be abstract, final or empty. | 78 |
![]() | Method 'getPort' is not designed for extension - needs to be abstract, final or empty. | 82 |
![]() | Missing a Javadoc comment. | 82 |
![]() | Method 'equals' is not designed for extension - needs to be abstract, final or empty. | 86 |
![]() | Parameter other should be final. | 87 |
![]() | '&&' should be on a new line. | 90 |
![]() | '&&' should be on a new line. | 91 |
![]() | Method 'hashCode' is not designed for extension - needs to be abstract, final or empty. | 99 |
![]() | '17' is a magic number. | 101 |
![]() | '37' is a magic number. | 102 |
![]() | '37' is a magic number. | 103 |
![]() | '37' is a magic number. | 104 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 108 |
![]() | '+' should be on a new line. | 110 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 114 |
![]() | Parameter input should be final. | 115 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 122 |
![]() | Parameter output should be final. | 123 |
![]() | First sentence should end with a period. | 32 |
![]() | First sentence should end with a period. | 34 |
![]() | First sentence should end with a period. | 36 |
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 41 |
![]() | Parameter hostname should be final. | 54 |
![]() | 'hostname' hides a field. | 54 |
![]() | Parameter partitionId should be final. | 54 |
![]() | 'partitionId' hides a field. | 54 |
![]() | Parameter port should be final. | 54 |
![]() | 'port' hides a field. | 54 |
![]() | Method 'getHostname' is not designed for extension - needs to be abstract, final or empty. | 61 |
![]() | Missing a Javadoc comment. | 61 |
![]() | Method 'getPartitionId' is not designed for extension - needs to be abstract, final or empty. | 65 |
![]() | Missing a Javadoc comment. | 65 |
![]() | Method 'getHostnameId' is not designed for extension - needs to be abstract, final or empty. | 69 |
![]() | Missing a Javadoc comment. | 69 |
![]() | First sentence should end with a period. | 73 |
![]() | Method 'getInetSocketAddress' is not designed for extension - needs to be abstract, final or empty. | 78 |
![]() | Method 'getPort' is not designed for extension - needs to be abstract, final or empty. | 82 |
![]() | Missing a Javadoc comment. | 82 |
![]() | Method 'equals' is not designed for extension - needs to be abstract, final or empty. | 86 |
![]() | Parameter other should be final. | 87 |
![]() | '&&' should be on a new line. | 90 |
![]() | '&&' should be on a new line. | 91 |
![]() | Method 'hashCode' is not designed for extension - needs to be abstract, final or empty. | 99 |
![]() | '17' is a magic number. | 101 |
![]() | '37' is a magic number. | 102 |
![]() | '37' is a magic number. | 103 |
![]() | '37' is a magic number. | 104 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 108 |
![]() | '+' should be on a new line. | 110 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 114 |
![]() | Parameter input should be final. | 115 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 122 |
![]() | Parameter output should be final. | 123 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 34 |
![]() | First sentence should end with a period. | 36 |
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 40 |
![]() | First sentence should end with a period. | 42 |
![]() | Parameter partitionId should be final. | 56 |
![]() | 'partitionId' hides a field. | 56 |
![]() | Parameter workerInfo should be final. | 56 |
![]() | 'workerInfo' hides a field. | 56 |
![]() | Parameter partitionId should be final. | 68 |
![]() | 'partitionId' hides a field. | 68 |
![]() | Parameter workerInfo should be final. | 69 |
![]() | 'workerInfo' hides a field. | 69 |
![]() | Parameter previousWorkerInfo should be final. | 70 |
![]() | 'previousWorkerInfo' hides a field. | 70 |
![]() | Parameter checkpointFilesPrefix should be final. | 71 |
![]() | 'checkpointFilesPrefix' hides a field. | 71 |
![]() | Method 'getPartitionId' is not designed for extension - needs to be abstract, final or empty. | 78 |
![]() | Method 'getWorkerInfo' is not designed for extension - needs to be abstract, final or empty. | 83 |
![]() | Method 'setWorkerInfo' is not designed for extension - needs to be abstract, final or empty. | 88 |
![]() | Parameter workerInfo should be final. | 89 |
![]() | 'workerInfo' hides a field. | 89 |
![]() | Method 'getPreviousWorkerInfo' is not designed for extension - needs to be abstract, final or empty. | 93 |
![]() | Method 'setPreviousWorkerInfo' is not designed for extension - needs to be abstract, final or empty. | 98 |
![]() | Parameter workerInfo should be final. | 99 |
![]() | 'workerInfo' hides a field. | 99 |
![]() | Method 'getCheckpointFilesPrefix' is not designed for extension - needs to be abstract, final or empty. | 103 |
![]() | Method 'setCheckpointFilesPrefix' is not designed for extension - needs to be abstract, final or empty. | 108 |
![]() | Parameter checkpointFilesPrefix should be final. | 109 |
![]() | 'checkpointFilesPrefix' hides a field. | 109 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 113 |
![]() | Parameter input should be final. | 114 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 129 |
![]() | Parameter output should be final. | 130 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 147 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 152 |
![]() | Parameter conf should be final. | 153 |
![]() | 'conf' hides a field. | 153 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 157 |
![]() | '+' should be on a new line. | 159 |
![]() | First sentence should end with a period. | 34 |
![]() | First sentence should end with a period. | 36 |
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 40 |
![]() | First sentence should end with a period. | 42 |
![]() | Parameter partitionId should be final. | 56 |
![]() | 'partitionId' hides a field. | 56 |
![]() | Parameter workerInfo should be final. | 56 |
![]() | 'workerInfo' hides a field. | 56 |
![]() | Parameter partitionId should be final. | 68 |
![]() | 'partitionId' hides a field. | 68 |
![]() | Parameter workerInfo should be final. | 69 |
![]() | 'workerInfo' hides a field. | 69 |
![]() | Parameter previousWorkerInfo should be final. | 70 |
![]() | 'previousWorkerInfo' hides a field. | 70 |
![]() | Parameter checkpointFilesPrefix should be final. | 71 |
![]() | 'checkpointFilesPrefix' hides a field. | 71 |
![]() | Method 'getPartitionId' is not designed for extension - needs to be abstract, final or empty. | 78 |
![]() | Method 'getWorkerInfo' is not designed for extension - needs to be abstract, final or empty. | 83 |
![]() | Method 'setWorkerInfo' is not designed for extension - needs to be abstract, final or empty. | 88 |
![]() | Parameter workerInfo should be final. | 89 |
![]() | 'workerInfo' hides a field. | 89 |
![]() | Method 'getPreviousWorkerInfo' is not designed for extension - needs to be abstract, final or empty. | 93 |
![]() | Method 'setPreviousWorkerInfo' is not designed for extension - needs to be abstract, final or empty. | 98 |
![]() | Parameter workerInfo should be final. | 99 |
![]() | 'workerInfo' hides a field. | 99 |
![]() | Method 'getCheckpointFilesPrefix' is not designed for extension - needs to be abstract, final or empty. | 103 |
![]() | Method 'setCheckpointFilesPrefix' is not designed for extension - needs to be abstract, final or empty. | 108 |
![]() | Parameter checkpointFilesPrefix should be final. | 109 |
![]() | 'checkpointFilesPrefix' hides a field. | 109 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 113 |
![]() | Parameter input should be final. | 114 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 129 |
![]() | Parameter output should be final. | 130 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 147 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 152 |
![]() | Parameter conf should be final. | 153 |
![]() | 'conf' hides a field. | 153 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 157 |
![]() | '+' should be on a new line. | 159 |
Violation | Message | Line |
---|---|---|
![]() | Parameter conf should be final. | 83 |
![]() | 'conf' hides a field. | 83 |
![]() | '+' should be on a new line. | 89 |
![]() | Parameter partitionId should be final. | 100 |
![]() | Parameter partitionId should be final. | 111 |
![]() | Parameter partitionId should be final. | 126 |
![]() | Parameter partition should be final. | 136 |
![]() | Expected @throws tag for 'IOException'. | 137 |
![]() | Parameter partitionId should be final. | 156 |
![]() | Expected @throws tag for 'IOException'. | 157 |
![]() | Parameter partitionId should be final. | 181 |
![]() | Parameter vertices should be final. | 182 |
![]() | Expected @throws tag for 'IOException'. | 183 |
![]() | Parameter partitionId should be final. | 198 |
![]() | '+' should be on a new line. | 204 |
![]() | '+' should be on a new line. | 213 |
![]() | '+' should be on a new line. | 218 |
![]() | '+' should be on a new line. | 224 |
![]() | Parameter partition should be final. | 234 |
![]() | '+' should be on a new line. | 246 |
![]() | Method 'addPartition' is not designed for extension - needs to be abstract, final or empty. | 251 |
![]() | Parameter partition should be final. | 252 |
![]() | '+' should be on a new line. | 255 |
![]() | Method 'addPartitionVertices' is not designed for extension - needs to be abstract, final or empty. | 262 |
![]() | Parameter partitionId should be final. | 263 |
![]() | Parameter vertices should be final. | 264 |
![]() | '+' should be on a new line. | 279 |
![]() | Method 'getPartition' is not designed for extension - needs to be abstract, final or empty. | 300 |
![]() | Parameter partitionId should be final. | 301 |
![]() | '+' should be on a new line. | 308 |
![]() | Method 'removePartition' is not designed for extension - needs to be abstract, final or empty. | 313 |
![]() | Parameter partitionId should be final. | 314 |
![]() | '+' should be on a new line. | 325 |
![]() | Method 'deletePartition' is not designed for extension - needs to be abstract, final or empty. | 336 |
![]() | Parameter partitionId should be final. | 337 |
![]() | Method 'hasPartition' is not designed for extension - needs to be abstract, final or empty. | 352 |
![]() | Parameter partitionId should be final. | 353 |
![]() | Method 'getPartitionIds' is not designed for extension - needs to be abstract, final or empty. | 357 |
![]() | Method 'getNumPartitions' is not designed for extension - needs to be abstract, final or empty. | 363 |
![]() | Parameter conf should be final. | 83 |
![]() | 'conf' hides a field. | 83 |
![]() | '+' should be on a new line. | 89 |
![]() | Parameter partitionId should be final. | 100 |
![]() | Parameter partitionId should be final. | 111 |
![]() | Parameter partitionId should be final. | 126 |
![]() | Parameter partition should be final. | 136 |
![]() | Expected @throws tag for 'IOException'. | 137 |
![]() | Parameter partitionId should be final. | 156 |
![]() | Expected @throws tag for 'IOException'. | 157 |
![]() | Parameter partitionId should be final. | 181 |
![]() | Parameter vertices should be final. | 182 |
![]() | Expected @throws tag for 'IOException'. | 183 |
![]() | Parameter partitionId should be final. | 198 |
![]() | '+' should be on a new line. | 204 |
![]() | '+' should be on a new line. | 213 |
![]() | '+' should be on a new line. | 218 |
![]() | '+' should be on a new line. | 224 |
![]() | Parameter partition should be final. | 234 |
![]() | '+' should be on a new line. | 246 |
![]() | Method 'addPartition' is not designed for extension - needs to be abstract, final or empty. | 251 |
![]() | Parameter partition should be final. | 252 |
![]() | '+' should be on a new line. | 255 |
![]() | Method 'addPartitionVertices' is not designed for extension - needs to be abstract, final or empty. | 262 |
![]() | Parameter partitionId should be final. | 263 |
![]() | Parameter vertices should be final. | 264 |
![]() | '+' should be on a new line. | 279 |
![]() | Method 'getPartition' is not designed for extension - needs to be abstract, final or empty. | 300 |
![]() | Parameter partitionId should be final. | 301 |
![]() | '+' should be on a new line. | 308 |
![]() | Method 'removePartition' is not designed for extension - needs to be abstract, final or empty. | 313 |
![]() | Parameter partitionId should be final. | 314 |
![]() | '+' should be on a new line. | 325 |
![]() | Method 'deletePartition' is not designed for extension - needs to be abstract, final or empty. | 336 |
![]() | Parameter partitionId should be final. | 337 |
![]() | Method 'hasPartition' is not designed for extension - needs to be abstract, final or empty. | 352 |
![]() | Parameter partitionId should be final. | 353 |
![]() | Method 'getPartitionIds' is not designed for extension - needs to be abstract, final or empty. | 357 |
![]() | Method 'getNumPartitions' is not designed for extension - needs to be abstract, final or empty. | 363 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 44 |
![]() | First sentence should end with a period. | 47 |
![]() | First sentence should end with a period. | 49 |
![]() | First sentence should end with a period. | 52 |
![]() | First sentence should end with a period. | 54 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 55 |
![]() | First sentence should end with a period. | 56 |
![]() | '1024' is a magic number. | 60 |
![]() | '1024' is a magic number. | 60 |
![]() | '350' is a magic number. | 60 |
![]() | First sentence should end with a period. | 61 |
![]() | First sentence should end with a period. | 63 |
![]() | First sentence should end with a period. | 65 |
![]() | First sentence should end with a period. | 67 |
![]() | Parameter conf should be final. | 75 |
![]() | 'conf' hides a field. | 75 |
![]() | Method 'createInitialPartitionOwners' is not designed for extension - needs to be abstract, final or empty. | 81 |
![]() | Parameter availableWorkerInfos should be final. | 83 |
![]() | Parameter maxWorkers should be final. | 83 |
![]() | '*' should be on a new line. | 95 |
![]() | '+' should be on a new line. | 102 |
![]() | '+' should be on a new line. | 103 |
![]() | '*' should be on a new line. | 104 |
![]() | '+' should be on a new line. | 108 |
![]() | '+' should be on a new line. | 109 |
![]() | Method 'getCurrentPartitionOwners' is not designed for extension - needs to be abstract, final or empty. | 125 |
![]() | Method 'setPartitionOwnerList' is not designed for extension - needs to be abstract, final or empty. | 135 |
![]() | Parameter partitionOwnerList should be final. | 135 |
![]() | 'partitionOwnerList' hides a field. | 136 |
![]() | Method 'generateChangedPartitionOwners' is not designed for extension - needs to be abstract, final or empty. | 140 |
![]() | Parameter allPartitionStatsList should be final. | 142 |
![]() | Parameter availableWorkerInfos should be final. | 143 |
![]() | Parameter maxWorkers should be final. | 144 |
![]() | Parameter superstep should be final. | 145 |
![]() | Method 'createPartitionStats' is not designed for extension - needs to be abstract, final or empty. | 153 |
![]() | First sentence should end with a period. | 44 |
![]() | First sentence should end with a period. | 47 |
![]() | First sentence should end with a period. | 49 |
![]() | First sentence should end with a period. | 52 |
![]() | First sentence should end with a period. | 54 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 55 |
![]() | First sentence should end with a period. | 56 |
![]() | '1024' is a magic number. | 60 |
![]() | '1024' is a magic number. | 60 |
![]() | '350' is a magic number. | 60 |
![]() | First sentence should end with a period. | 61 |
![]() | First sentence should end with a period. | 63 |
![]() | First sentence should end with a period. | 65 |
![]() | First sentence should end with a period. | 67 |
![]() | Parameter conf should be final. | 75 |
![]() | 'conf' hides a field. | 75 |
![]() | Method 'createInitialPartitionOwners' is not designed for extension - needs to be abstract, final or empty. | 81 |
![]() | Parameter availableWorkerInfos should be final. | 83 |
![]() | Parameter maxWorkers should be final. | 83 |
![]() | '*' should be on a new line. | 95 |
![]() | '+' should be on a new line. | 102 |
![]() | '+' should be on a new line. | 103 |
![]() | '*' should be on a new line. | 104 |
![]() | '+' should be on a new line. | 108 |
![]() | '+' should be on a new line. | 109 |
![]() | Method 'getCurrentPartitionOwners' is not designed for extension - needs to be abstract, final or empty. | 125 |
![]() | Method 'setPartitionOwnerList' is not designed for extension - needs to be abstract, final or empty. | 135 |
![]() | Parameter partitionOwnerList should be final. | 135 |
![]() | 'partitionOwnerList' hides a field. | 136 |
![]() | Method 'generateChangedPartitionOwners' is not designed for extension - needs to be abstract, final or empty. | 140 |
![]() | Parameter allPartitionStatsList should be final. | 142 |
![]() | Parameter availableWorkerInfos should be final. | 143 |
![]() | Parameter maxWorkers should be final. | 144 |
![]() | Parameter superstep should be final. | 145 |
![]() | Method 'createPartitionStats' is not designed for extension - needs to be abstract, final or empty. | 153 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 39 |
![]() | Method 'createMasterGraphPartitioner' is not designed for extension - needs to be abstract, final or empty. | 42 |
![]() | Method 'createWorkerGraphPartitioner' is not designed for extension - needs to be abstract, final or empty. | 47 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 52 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 57 |
![]() | Parameter conf should be final. | 58 |
![]() | 'conf' hides a field. | 58 |
![]() | First sentence should end with a period. | 39 |
![]() | Method 'createMasterGraphPartitioner' is not designed for extension - needs to be abstract, final or empty. | 42 |
![]() | Method 'createWorkerGraphPartitioner' is not designed for extension - needs to be abstract, final or empty. | 47 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 52 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 57 |
![]() | Parameter conf should be final. | 58 |
![]() | 'conf' hides a field. | 58 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 39 |
![]() | Method 'createMasterGraphPartitioner' is not designed for extension - needs to be abstract, final or empty. | 42 |
![]() | Method 'createWorkerGraphPartitioner' is not designed for extension - needs to be abstract, final or empty. | 47 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 52 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 57 |
![]() | Parameter conf should be final. | 58 |
![]() | 'conf' hides a field. | 58 |
![]() | First sentence should end with a period. | 39 |
![]() | Method 'createMasterGraphPartitioner' is not designed for extension - needs to be abstract, final or empty. | 42 |
![]() | Method 'createWorkerGraphPartitioner' is not designed for extension - needs to be abstract, final or empty. | 47 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 52 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 57 |
![]() | Parameter conf should be final. | 58 |
![]() | 'conf' hides a field. | 58 |
Violation | Message | Line |
---|---|---|
![]() | Method 'getPartitionOwner' is not designed for extension - needs to be abstract, final or empty. | 36 |
![]() | Parameter vertexId should be final. | 37 |
![]() | Method 'getPartitionOwner' is not designed for extension - needs to be abstract, final or empty. | 36 |
![]() | Parameter vertexId should be final. | 37 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 45 |
![]() | Variable 'partitionOwnerList' must be private and have accessor methods. | 46 |
![]() | Method 'createPartitionOwner' is not designed for extension - needs to be abstract, final or empty. | 49 |
![]() | Method 'getPartitionOwner' is not designed for extension - needs to be abstract, final or empty. | 54 |
![]() | Parameter vertexId should be final. | 55 |
![]() | '%' should be on a new line. | 57 |
![]() | Method 'finalizePartitionStats' is not designed for extension - needs to be abstract, final or empty. | 62 |
![]() | Parameter workerPartitionStats should be final. | 64 |
![]() | Parameter partitionStore should be final. | 65 |
![]() | Method 'updatePartitionOwners' is not designed for extension - needs to be abstract, final or empty. | 70 |
![]() | Parameter myWorkerInfo should be final. | 72 |
![]() | Parameter masterSetPartitionOwners should be final. | 73 |
![]() | Parameter partitionStore should be final. | 74 |
![]() | '&&' should be on a new line. | 87 |
![]() | '+' should be on a new line. | 91 |
![]() | '+' should be on a new line. | 92 |
![]() | Method 'getPartitionOwners' is not designed for extension - needs to be abstract, final or empty. | 116 |
![]() | First sentence should end with a period. | 45 |
![]() | Variable 'partitionOwnerList' must be private and have accessor methods. | 46 |
![]() | Method 'createPartitionOwner' is not designed for extension - needs to be abstract, final or empty. | 49 |
![]() | Method 'getPartitionOwner' is not designed for extension - needs to be abstract, final or empty. | 54 |
![]() | Parameter vertexId should be final. | 55 |
![]() | '%' should be on a new line. | 57 |
![]() | Method 'finalizePartitionStats' is not designed for extension - needs to be abstract, final or empty. | 62 |
![]() | Parameter workerPartitionStats should be final. | 64 |
![]() | Parameter partitionStore should be final. | 65 |
![]() | Method 'updatePartitionOwners' is not designed for extension - needs to be abstract, final or empty. | 70 |
![]() | Parameter myWorkerInfo should be final. | 72 |
![]() | Parameter masterSetPartitionOwners should be final. | 73 |
![]() | Parameter partitionStore should be final. | 74 |
![]() | '&&' should be on a new line. | 87 |
![]() | '+' should be on a new line. | 91 |
![]() | '+' should be on a new line. | 92 |
![]() | Method 'getPartitionOwners' is not designed for extension - needs to be abstract, final or empty. | 116 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 76 |
![]() | First sentence should end with a period. | 76 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 50 |
![]() | First sentence should end with a period. | 52 |
![]() | First sentence should end with a period. | 54 |
![]() | Parameter conf should be final. | 63 |
![]() | 'conf' hides a field. | 63 |
![]() | Parameter id should be final. | 63 |
![]() | 'id' hides a field. | 63 |
![]() | Method 'getVertex' is not designed for extension - needs to be abstract, final or empty. | 80 |
![]() | Parameter vertexIndex should be final. | 80 |
![]() | First sentence should end with a period. | 84 |
![]() | Method 'putVertex' is not designed for extension - needs to be abstract, final or empty. | 90 |
![]() | Parameter vertex should be final. | 90 |
![]() | First sentence should end with a period. | 94 |
![]() | Method 'removeVertex' is not designed for extension - needs to be abstract, final or empty. | 100 |
![]() | Parameter vertexIndex should be final. | 100 |
![]() | Method 'getVertices' is not designed for extension - needs to be abstract, final or empty. | 109 |
![]() | Method 'putVertices' is not designed for extension - needs to be abstract, final or empty. | 118 |
![]() | Parameter vertices should be final. | 118 |
![]() | Method 'getEdgeCount' is not designed for extension - needs to be abstract, final or empty. | 129 |
![]() | Method 'getId' is not designed for extension - needs to be abstract, final or empty. | 142 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 146 |
![]() | '+' should be on a new line. | 148 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 152 |
![]() | Parameter input should be final. | 153 |
![]() | '+' should be on a new line. | 162 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 168 |
![]() | Parameter output should be final. | 169 |
![]() | First sentence should end with a period. | 50 |
![]() | First sentence should end with a period. | 52 |
![]() | First sentence should end with a period. | 54 |
![]() | Parameter conf should be final. | 63 |
![]() | 'conf' hides a field. | 63 |
![]() | Parameter id should be final. | 63 |
![]() | 'id' hides a field. | 63 |
![]() | Method 'getVertex' is not designed for extension - needs to be abstract, final or empty. | 80 |
![]() | Parameter vertexIndex should be final. | 80 |
![]() | First sentence should end with a period. | 84 |
![]() | Method 'putVertex' is not designed for extension - needs to be abstract, final or empty. | 90 |
![]() | Parameter vertex should be final. | 90 |
![]() | First sentence should end with a period. | 94 |
![]() | Method 'removeVertex' is not designed for extension - needs to be abstract, final or empty. | 100 |
![]() | Parameter vertexIndex should be final. | 100 |
![]() | Method 'getVertices' is not designed for extension - needs to be abstract, final or empty. | 109 |
![]() | Method 'putVertices' is not designed for extension - needs to be abstract, final or empty. | 118 |
![]() | Parameter vertices should be final. | 118 |
![]() | Method 'getEdgeCount' is not designed for extension - needs to be abstract, final or empty. | 129 |
![]() | Method 'getId' is not designed for extension - needs to be abstract, final or empty. | 142 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 146 |
![]() | '+' should be on a new line. | 148 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 152 |
![]() | Parameter input should be final. | 153 |
![]() | '+' should be on a new line. | 162 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 168 |
![]() | Parameter output should be final. | 169 |
Violation | Message | Line |
---|---|---|
![]() | Class PartitionBalancer should be declared as final. | 37 |
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 41 |
![]() | First sentence should end with a period. | 44 |
![]() | First sentence should end with a period. | 47 |
![]() | First sentence should end with a period. | 50 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 51 |
![]() | First sentence should end with a period. | 57 |
![]() | First sentence should end with a period. | 59 |
![]() | First sentence should end with a period. | 61 |
![]() | Parameter partitionStat should be final. | 77 |
![]() | Parameter balanceValue should be final. | 78 |
![]() | First sentence should end with a period. | 90 |
![]() | First sentence should end with a period. | 95 |
![]() | First sentence should end with a period. | 97 |
![]() | Parameter ownerStatMap should be final. | 108 |
![]() | 'ownerStatMap' hides a field. | 108 |
![]() | Parameter balanceValue should be final. | 109 |
![]() | 'balanceValue' hides a field. | 109 |
![]() | Parameter owner1 should be final. | 115 |
![]() | Parameter owner2 should be final. | 115 |
![]() | '-' should be on a new line. | 117 |
![]() | First sentence should end with a period. | 128 |
![]() | First sentence should end with a period. | 130 |
![]() | First sentence should end with a period. | 132 |
![]() | First sentence should end with a period. | 134 |
![]() | Parameter workerInfo should be final. | 145 |
![]() | 'workerInfo' hides a field. | 145 |
![]() | Parameter balanceValue should be final. | 146 |
![]() | 'balanceValue' hides a field. | 146 |
![]() | Parameter ownerStatsMap should be final. | 147 |
![]() | 'ownerStatsMap' hides a field. | 147 |
![]() | Parameter partitionOwner should be final. | 168 |
![]() | Parameter other should be final. | 181 |
![]() | Parameter conf should be final. | 197 |
![]() | Parameter partitionOwners should be final. | 198 |
![]() | Parameter allPartitionStats should be final. | 199 |
![]() | Parameter availableWorkerInfos should be final. | 200 |
![]() | '+' should be on a new line. | 205 |
![]() | '+' should be on a new line. | 217 |
![]() | '!=' should be on a new line. | 225 |
![]() | '+' should be on a new line. | 228 |
![]() | '+' should be on a new line. | 239 |
![]() | '+' should be on a new line. | 244 |
![]() | '+' should be on a new line. | 250 |
![]() | '+' should be on a new line. | 251 |
![]() | Class PartitionBalancer should be declared as final. | 37 |
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 41 |
![]() | First sentence should end with a period. | 44 |
![]() | First sentence should end with a period. | 47 |
![]() | First sentence should end with a period. | 50 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 51 |
![]() | First sentence should end with a period. | 57 |
![]() | First sentence should end with a period. | 59 |
![]() | First sentence should end with a period. | 61 |
![]() | Parameter partitionStat should be final. | 77 |
![]() | Parameter balanceValue should be final. | 78 |
![]() | First sentence should end with a period. | 90 |
![]() | First sentence should end with a period. | 95 |
![]() | First sentence should end with a period. | 97 |
![]() | Parameter ownerStatMap should be final. | 108 |
![]() | 'ownerStatMap' hides a field. | 108 |
![]() | Parameter balanceValue should be final. | 109 |
![]() | 'balanceValue' hides a field. | 109 |
![]() | Parameter owner1 should be final. | 115 |
![]() | Parameter owner2 should be final. | 115 |
![]() | '-' should be on a new line. | 117 |
![]() | First sentence should end with a period. | 128 |
![]() | First sentence should end with a period. | 130 |
![]() | First sentence should end with a period. | 132 |
![]() | First sentence should end with a period. | 134 |
![]() | Parameter workerInfo should be final. | 145 |
![]() | 'workerInfo' hides a field. | 145 |
![]() | Parameter balanceValue should be final. | 146 |
![]() | 'balanceValue' hides a field. | 146 |
![]() | Parameter ownerStatsMap should be final. | 147 |
![]() | 'ownerStatsMap' hides a field. | 147 |
![]() | Parameter partitionOwner should be final. | 168 |
![]() | Parameter other should be final. | 181 |
![]() | Parameter conf should be final. | 197 |
![]() | Parameter partitionOwners should be final. | 198 |
![]() | Parameter allPartitionStats should be final. | 199 |
![]() | Parameter availableWorkerInfos should be final. | 200 |
![]() | '+' should be on a new line. | 205 |
![]() | '+' should be on a new line. | 217 |
![]() | '!=' should be on a new line. | 225 |
![]() | '+' should be on a new line. | 228 |
![]() | '+' should be on a new line. | 239 |
![]() | '+' should be on a new line. | 244 |
![]() | '+' should be on a new line. | 250 |
![]() | '+' should be on a new line. | 251 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 32 |
![]() | First sentence should end with a period. | 34 |
![]() | Parameter myDependencyWorkerSet should be final. | 44 |
![]() | 'myDependencyWorkerSet' hides a field. | 44 |
![]() | Parameter sendWorkerPartitionMap should be final. | 45 |
![]() | 'sendWorkerPartitionMap' hides a field. | 45 |
![]() | First sentence should end with a period. | 50 |
![]() | Method 'getMyDependencyWorkerSet' is not designed for extension - needs to be abstract, final or empty. | 55 |
![]() | Method 'getSendWorkerPartitionMap' is not designed for extension - needs to be abstract, final or empty. | 64 |
![]() | Method 'doExchange' is not designed for extension - needs to be abstract, final or empty. | 73 |
![]() | '||' should be on a new line. | 74 |
![]() | First sentence should end with a period. | 32 |
![]() | First sentence should end with a period. | 34 |
![]() | Parameter myDependencyWorkerSet should be final. | 44 |
![]() | 'myDependencyWorkerSet' hides a field. | 44 |
![]() | Parameter sendWorkerPartitionMap should be final. | 45 |
![]() | 'sendWorkerPartitionMap' hides a field. | 45 |
![]() | First sentence should end with a period. | 50 |
![]() | Method 'getMyDependencyWorkerSet' is not designed for extension - needs to be abstract, final or empty. | 55 |
![]() | Method 'getSendWorkerPartitionMap' is not designed for extension - needs to be abstract, final or empty. | 64 |
![]() | Method 'doExchange' is not designed for extension - needs to be abstract, final or empty. | 73 |
![]() | '||' should be on a new line. | 74 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 28 |
![]() | First sentence should end with a period. | 28 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 32 |
![]() | First sentence should end with a period. | 34 |
![]() | First sentence should end with a period. | 36 |
![]() | First sentence should end with a period. | 38 |
![]() | Parameter partitionId should be final. | 54 |
![]() | 'partitionId' hides a field. | 54 |
![]() | Parameter vertexCount should be final. | 55 |
![]() | 'vertexCount' hides a field. | 55 |
![]() | Parameter finishedVertexCount should be final. | 56 |
![]() | 'finishedVertexCount' hides a field. | 56 |
![]() | Parameter edgeCount should be final. | 57 |
![]() | 'edgeCount' hides a field. | 57 |
![]() | Method 'setPartitionId' is not designed for extension - needs to be abstract, final or empty. | 69 |
![]() | Parameter partitionId should be final. | 69 |
![]() | 'partitionId' hides a field. | 69 |
![]() | Method 'getPartitionId' is not designed for extension - needs to be abstract, final or empty. | 78 |
![]() | Method 'incrVertexCount' is not designed for extension - needs to be abstract, final or empty. | 85 |
![]() | Method 'getVertexCount' is not designed for extension - needs to be abstract, final or empty. | 94 |
![]() | Method 'incrFinishedVertexCount' is not designed for extension - needs to be abstract, final or empty. | 101 |
![]() | Method 'getFinishedVertexCount' is not designed for extension - needs to be abstract, final or empty. | 110 |
![]() | Method 'addEdgeCount' is not designed for extension - needs to be abstract, final or empty. | 119 |
![]() | Parameter edgeCount should be final. | 119 |
![]() | 'edgeCount' hides a field. | 119 |
![]() | Method 'getEdgeCount' is not designed for extension - needs to be abstract, final or empty. | 128 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 132 |
![]() | Parameter input should be final. | 133 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 140 |
![]() | Parameter output should be final. | 141 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 148 |
![]() | '+' should be on a new line. | 150 |
![]() | First sentence should end with a period. | 32 |
![]() | First sentence should end with a period. | 34 |
![]() | First sentence should end with a period. | 36 |
![]() | First sentence should end with a period. | 38 |
![]() | Parameter partitionId should be final. | 54 |
![]() | 'partitionId' hides a field. | 54 |
![]() | Parameter vertexCount should be final. | 55 |
![]() | 'vertexCount' hides a field. | 55 |
![]() | Parameter finishedVertexCount should be final. | 56 |
![]() | 'finishedVertexCount' hides a field. | 56 |
![]() | Parameter edgeCount should be final. | 57 |
![]() | 'edgeCount' hides a field. | 57 |
![]() | Method 'setPartitionId' is not designed for extension - needs to be abstract, final or empty. | 69 |
![]() | Parameter partitionId should be final. | 69 |
![]() | 'partitionId' hides a field. | 69 |
![]() | Method 'getPartitionId' is not designed for extension - needs to be abstract, final or empty. | 78 |
![]() | Method 'incrVertexCount' is not designed for extension - needs to be abstract, final or empty. | 85 |
![]() | Method 'getVertexCount' is not designed for extension - needs to be abstract, final or empty. | 94 |
![]() | Method 'incrFinishedVertexCount' is not designed for extension - needs to be abstract, final or empty. | 101 |
![]() | Method 'getFinishedVertexCount' is not designed for extension - needs to be abstract, final or empty. | 110 |
![]() | Method 'addEdgeCount' is not designed for extension - needs to be abstract, final or empty. | 119 |
![]() | Parameter edgeCount should be final. | 119 |
![]() | 'edgeCount' hides a field. | 119 |
![]() | Method 'getEdgeCount' is not designed for extension - needs to be abstract, final or empty. | 128 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 132 |
![]() | Parameter input should be final. | 133 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 140 |
![]() | Parameter output should be final. | 141 |
![]() | Method 'toString' is not designed for extension - needs to be abstract, final or empty. | 148 |
![]() | '+' should be on a new line. | 150 |
Violation | Message | Line |
---|---|---|
![]() | Method 'isEmpty' is not designed for extension - needs to be abstract, final or empty. | 109 |
![]() | Method 'getPartitions' is not designed for extension - needs to be abstract, final or empty. | 118 |
![]() | Parameter partitionId should be final. | 122 |
![]() | Method 'isEmpty' is not designed for extension - needs to be abstract, final or empty. | 109 |
![]() | Method 'getPartitions' is not designed for extension - needs to be abstract, final or empty. | 118 |
![]() | Parameter partitionId should be final. | 122 |
Violation | Message | Line |
---|---|---|
![]() | Class PartitionUtils should be declared as final. | 39 |
![]() | First sentence should end with a period. | 40 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 41 |
![]() | Parameter worker1 should be final. | 54 |
![]() | Parameter worker2 should be final. | 55 |
![]() | '-' should be on a new line. | 56 |
![]() | Parameter worker1 should be final. | 68 |
![]() | Parameter worker2 should be final. | 69 |
![]() | '-' should be on a new line. | 70 |
![]() | Parameter partitionOwnerList should be final. | 83 |
![]() | Parameter allPartitionStats should be final. | 84 |
![]() | '+' should be on a new line. | 91 |
![]() | '+' should be on a new line. | 126 |
![]() | '/' should be on a new line. | 127 |
![]() | '+' should be on a new line. | 128 |
![]() | '+' should be on a new line. | 129 |
![]() | '+' should be on a new line. | 130 |
![]() | '+' should be on a new line. | 131 |
![]() | '+' should be on a new line. | 132 |
![]() | '+' should be on a new line. | 133 |
![]() | '+' should be on a new line. | 134 |
![]() | '+' should be on a new line. | 138 |
![]() | '/' should be on a new line. | 139 |
![]() | '+' should be on a new line. | 140 |
![]() | '+' should be on a new line. | 141 |
![]() | '+' should be on a new line. | 142 |
![]() | '+' should be on a new line. | 143 |
![]() | '+' should be on a new line. | 144 |
![]() | '+' should be on a new line. | 145 |
![]() | '+' should be on a new line. | 146 |
![]() | Class PartitionUtils should be declared as final. | 39 |
![]() | First sentence should end with a period. | 40 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 41 |
![]() | Parameter worker1 should be final. | 54 |
![]() | Parameter worker2 should be final. | 55 |
![]() | '-' should be on a new line. | 56 |
![]() | Parameter worker1 should be final. | 68 |
![]() | Parameter worker2 should be final. | 69 |
![]() | '-' should be on a new line. | 70 |
![]() | Parameter partitionOwnerList should be final. | 83 |
![]() | Parameter allPartitionStats should be final. | 84 |
![]() | '+' should be on a new line. | 91 |
![]() | '+' should be on a new line. | 126 |
![]() | '/' should be on a new line. | 127 |
![]() | '+' should be on a new line. | 128 |
![]() | '+' should be on a new line. | 129 |
![]() | '+' should be on a new line. | 130 |
![]() | '+' should be on a new line. | 131 |
![]() | '+' should be on a new line. | 132 |
![]() | '+' should be on a new line. | 133 |
![]() | '+' should be on a new line. | 134 |
![]() | '+' should be on a new line. | 138 |
![]() | '/' should be on a new line. | 139 |
![]() | '+' should be on a new line. | 140 |
![]() | '+' should be on a new line. | 141 |
![]() | '+' should be on a new line. | 142 |
![]() | '+' should be on a new line. | 143 |
![]() | '+' should be on a new line. | 144 |
![]() | '+' should be on a new line. | 145 |
![]() | '+' should be on a new line. | 146 |
Violation | Message | Line |
---|---|---|
![]() | Method 'createPartitionStats' is not designed for extension - needs to be abstract, final or empty. | 39 |
![]() | Method 'createPartitionStats' is not designed for extension - needs to be abstract, final or empty. | 39 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 37 |
![]() | Parameter maxIndex should be final. | 50 |
![]() | 'maxIndex' hides a field. | 50 |
![]() | Method 'getMaxIndex' is not designed for extension - needs to be abstract, final or empty. | 59 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 63 |
![]() | Parameter input should be final. | 64 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 70 |
![]() | Parameter output should be final. | 71 |
![]() | First sentence should end with a period. | 37 |
![]() | Parameter maxIndex should be final. | 50 |
![]() | 'maxIndex' hides a field. | 50 |
![]() | Method 'getMaxIndex' is not designed for extension - needs to be abstract, final or empty. | 59 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 63 |
![]() | Parameter input should be final. | 64 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 70 |
![]() | Parameter output should be final. | 71 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 36 |
![]() | First sentence should end with a period. | 39 |
![]() | Method 'getRangeSplitHint' is not designed for extension - needs to be abstract, final or empty. | 44 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 48 |
![]() | Parameter input should be final. | 49 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 60 |
![]() | Parameter output should be final. | 61 |
![]() | First sentence should end with a period. | 36 |
![]() | First sentence should end with a period. | 39 |
![]() | Method 'getRangeSplitHint' is not designed for extension - needs to be abstract, final or empty. | 44 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 48 |
![]() | Parameter input should be final. | 49 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 60 |
![]() | Parameter output should be final. | 61 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 40 |
![]() | First sentence should end with a period. | 42 |
![]() | First sentence should end with a period. | 44 |
![]() | First sentence should end with a period. | 46 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 49 |
![]() | Parameter input should be final. | 50 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 57 |
![]() | Parameter output should be final. | 58 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 64 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 69 |
![]() | Parameter conf should be final. | 70 |
![]() | 'conf' hides a field. | 70 |
![]() | First sentence should end with a period. | 40 |
![]() | First sentence should end with a period. | 42 |
![]() | First sentence should end with a period. | 44 |
![]() | First sentence should end with a period. | 46 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 49 |
![]() | Parameter input should be final. | 50 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 57 |
![]() | Parameter output should be final. | 58 |
![]() | Method 'getConf' is not designed for extension - needs to be abstract, final or empty. | 64 |
![]() | Method 'setConf' is not designed for extension - needs to be abstract, final or empty. | 69 |
![]() | Parameter conf should be final. | 70 |
![]() | 'conf' hides a field. | 70 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 48 |
![]() | Variable 'vertexRangeMap' must be private and have accessor methods. | 49 |
![]() | Method 'createPartitionOwner' is not designed for extension - needs to be abstract, final or empty. | 52 |
![]() | Method 'getPartitionOwner' is not designed for extension - needs to be abstract, final or empty. | 57 |
![]() | Parameter vertexId should be final. | 58 |
![]() | Method 'getPartitionOwners' is not designed for extension - needs to be abstract, final or empty. | 74 |
![]() | First sentence should end with a period. | 48 |
![]() | Variable 'vertexRangeMap' must be private and have accessor methods. | 49 |
![]() | Method 'createPartitionOwner' is not designed for extension - needs to be abstract, final or empty. | 52 |
![]() | Method 'getPartitionOwner' is not designed for extension - needs to be abstract, final or empty. | 57 |
![]() | Parameter vertexId should be final. | 58 |
![]() | Method 'getPartitionOwners' is not designed for extension - needs to be abstract, final or empty. | 74 |
Violation | Message | Line |
---|---|---|
![]() | Parameter conf should be final. | 53 |
![]() | 'conf' hides a field. | 53 |
![]() | Method 'addPartition' is not designed for extension - needs to be abstract, final or empty. | 57 |
![]() | Parameter partition should be final. | 58 |
![]() | '+' should be on a new line. | 60 |
![]() | Method 'addPartitionVertices' is not designed for extension - needs to be abstract, final or empty. | 65 |
![]() | Parameter partitionId should be final. | 66 |
![]() | Parameter vertices should be final. | 67 |
![]() | Method 'getPartition' is not designed for extension - needs to be abstract, final or empty. | 80 |
![]() | Parameter partitionId should be final. | 81 |
![]() | Method 'removePartition' is not designed for extension - needs to be abstract, final or empty. | 85 |
![]() | Parameter partitionId should be final. | 86 |
![]() | Method 'deletePartition' is not designed for extension - needs to be abstract, final or empty. | 90 |
![]() | Parameter partitionId should be final. | 91 |
![]() | Method 'hasPartition' is not designed for extension - needs to be abstract, final or empty. | 95 |
![]() | Parameter partitionId should be final. | 96 |
![]() | Method 'getPartitionIds' is not designed for extension - needs to be abstract, final or empty. | 100 |
![]() | Method 'getNumPartitions' is not designed for extension - needs to be abstract, final or empty. | 105 |
![]() | Parameter conf should be final. | 53 |
![]() | 'conf' hides a field. | 53 |
![]() | Method 'addPartition' is not designed for extension - needs to be abstract, final or empty. | 57 |
![]() | Parameter partition should be final. | 58 |
![]() | '+' should be on a new line. | 60 |
![]() | Method 'addPartitionVertices' is not designed for extension - needs to be abstract, final or empty. | 65 |
![]() | Parameter partitionId should be final. | 66 |
![]() | Parameter vertices should be final. | 67 |
![]() | Method 'getPartition' is not designed for extension - needs to be abstract, final or empty. | 80 |
![]() | Parameter partitionId should be final. | 81 |
![]() | Method 'removePartition' is not designed for extension - needs to be abstract, final or empty. | 85 |
![]() | Parameter partitionId should be final. | 86 |
![]() | Method 'deletePartition' is not designed for extension - needs to be abstract, final or empty. | 90 |
![]() | Parameter partitionId should be final. | 91 |
![]() | Method 'hasPartition' is not designed for extension - needs to be abstract, final or empty. | 95 |
![]() | Parameter partitionId should be final. | 96 |
![]() | Method 'getPartitionIds' is not designed for extension - needs to be abstract, final or empty. | 100 |
![]() | Method 'getNumPartitions' is not designed for extension - needs to be abstract, final or empty. | 105 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 48 |
![]() | First sentence should end with a period. | 48 |
Violation | Message | Line |
---|---|---|
![]() | Method 'getServices' is not designed for extension - needs to be abstract, final or empty. | 38 |
![]() | Method 'getServices' is not designed for extension - needs to be abstract, final or empty. | 38 |
Violation | Message | Line |
---|---|---|
![]() | Method 'selectToken' is not designed for extension - needs to be abstract, final or empty. | 34 |
![]() | Parameter service should be final. | 36 |
![]() | Parameter tokens should be final. | 37 |
![]() | Method 'selectToken' is not designed for extension - needs to be abstract, final or empty. | 34 |
![]() | Parameter service should be final. | 36 |
![]() | Parameter tokens should be final. | 37 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 64 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 65 |
![]() | Parameter conf should be final. | 73 |
![]() | Parameter allPartitionStatsList should be final. | 79 |
![]() | Parameter availableWorkerInfos should be final. | 80 |
![]() | Parameter maxWorkers should be final. | 81 |
![]() | Parameter superstep should be final. | 82 |
![]() | '+' should be on a new line. | 97 |
![]() | '+' should be on a new line. | 98 |
![]() | ':' should be on a new line. | 103 |
![]() | '?' should be on a new line. | 106 |
![]() | Avoid inline conditionals. | 106 |
![]() | '+' should be on a new line. | 114 |
![]() | Method 'createMasterGraphPartitioner' is not designed for extension - needs to be abstract, final or empty. | 122 |
![]() | First sentence should end with a period. | 64 |
![]() | Name 'LOG' must match pattern '^[a-z][a-zA-Z0-9]*$'. | 65 |
![]() | Parameter conf should be final. | 73 |
![]() | Parameter allPartitionStatsList should be final. | 79 |
![]() | Parameter availableWorkerInfos should be final. | 80 |
![]() | Parameter maxWorkers should be final. | 81 |
![]() | Parameter superstep should be final. | 82 |
![]() | '+' should be on a new line. | 97 |
![]() | '+' should be on a new line. | 98 |
![]() | ':' should be on a new line. | 103 |
![]() | '?' should be on a new line. | 106 |
![]() | Avoid inline conditionals. | 106 |
![]() | '+' should be on a new line. | 114 |
![]() | Method 'createMasterGraphPartitioner' is not designed for extension - needs to be abstract, final or empty. | 122 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 57 |
![]() | First sentence should end with a period. | 59 |
![]() | Parameter recordWriter should be final. | 67 |
![]() | Parameter vertex should be final. | 72 |
![]() | Method 'createVertexWriter' is not designed for extension - needs to be abstract, final or empty. | 92 |
![]() | Parameter context should be final. | 93 |
![]() | '(' should be on the previous line. | 96 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 57 |
![]() | First sentence should end with a period. | 59 |
![]() | Parameter recordWriter should be final. | 67 |
![]() | Parameter vertex should be final. | 72 |
![]() | Method 'createVertexWriter' is not designed for extension - needs to be abstract, final or empty. | 92 |
![]() | Parameter context should be final. | 93 |
![]() | '(' should be on the previous line. | 96 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 53 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 57 |
![]() | Parameter lineRecordReader should be final. | 84 |
![]() | Parameter lineRecordReader should be final. | 96 |
![]() | Parameter sanitizer should be final. | 97 |
![]() | 'sanitizer' hides a field. | 97 |
![]() | First sentence should end with a period. | 117 |
![]() | Method 'nextVertex' is not designed for extension - needs to be abstract, final or empty. | 126 |
![]() | Method 'getCurrentVertex' is not designed for extension - needs to be abstract, final or empty. | 131 |
![]() | First sentence should end with a period. | 53 |
![]() | First sentence should end with a period. | 55 |
![]() | First sentence should end with a period. | 57 |
![]() | Parameter lineRecordReader should be final. | 84 |
![]() | Parameter lineRecordReader should be final. | 96 |
![]() | Parameter sanitizer should be final. | 97 |
![]() | 'sanitizer' hides a field. | 97 |
![]() | First sentence should end with a period. | 117 |
![]() | Method 'nextVertex' is not designed for extension - needs to be abstract, final or empty. | 126 |
![]() | Method 'getCurrentVertex' is not designed for extension - needs to be abstract, final or empty. | 131 |
Violation | Message | Line |
---|---|---|
![]() | Method 'getSplits' is not designed for extension - needs to be abstract, final or empty. | 45 |
![]() | Parameter context should be final. | 46 |
![]() | Parameter numWorkers should be final. | 46 |
![]() | Method 'getSplits' is not designed for extension - needs to be abstract, final or empty. | 45 |
![]() | Parameter context should be final. | 46 |
![]() | Parameter numWorkers should be final. | 46 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 56 |
![]() | First sentence should end with a period. | 58 |
![]() | First sentence should end with a period. | 64 |
![]() | Parameter recordWriter should be final. | 72 |
![]() | Parameter vertex should be final. | 77 |
![]() | Method 'createVertexWriter' is not designed for extension - needs to be abstract, final or empty. | 103 |
![]() | Parameter context should be final. | 104 |
![]() | '(' should be on the previous line. | 107 |
![]() | First sentence should end with a period. | 56 |
![]() | First sentence should end with a period. | 58 |
![]() | First sentence should end with a period. | 64 |
![]() | Parameter recordWriter should be final. | 72 |
![]() | Parameter vertex should be final. | 77 |
![]() | Method 'createVertexWriter' is not designed for extension - needs to be abstract, final or empty. | 103 |
![]() | Parameter context should be final. | 104 |
![]() | '(' should be on the previous line. | 107 |
Violation | Message | Line |
---|---|---|
![]() | Method 'createVertexReader' is not designed for extension - needs to be abstract, final or empty. | 49 |
![]() | Parameter split should be final. | 51 |
![]() | Parameter context should be final. | 51 |
![]() | First sentence should end with a period. | 63 |
![]() | Parameter lineReader should be final. | 71 |
![]() | Method 'getCurrentVertex' is not designed for extension - needs to be abstract, final or empty. | 76 |
![]() | Method 'nextVertex' is not designed for extension - needs to be abstract, final or empty. | 99 |
![]() | Method 'createVertexReader' is not designed for extension - needs to be abstract, final or empty. | 49 |
![]() | Parameter split should be final. | 51 |
![]() | Parameter context should be final. | 51 |
![]() | First sentence should end with a period. | 63 |
![]() | Parameter lineReader should be final. | 71 |
![]() | Method 'getCurrentVertex' is not designed for extension - needs to be abstract, final or empty. | 76 |
![]() | Method 'nextVertex' is not designed for extension - needs to be abstract, final or empty. | 99 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 21 |
![]() | Class JsonBase64VertexFormat should be declared as final. | 24 |
![]() | First sentence should end with a period. | 25 |
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 29 |
![]() | First sentence should end with a period. | 21 |
![]() | Class JsonBase64VertexFormat should be declared as final. | 24 |
![]() | First sentence should end with a period. | 25 |
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 29 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 61 |
![]() | Parameter lineRecordReader should be final. | 78 |
![]() | Method 'createVertexReader' is not designed for extension - needs to be abstract, final or empty. | 158 |
![]() | Parameter split should be final. | 160 |
![]() | Parameter context should be final. | 160 |
![]() | First sentence should end with a period. | 61 |
![]() | Parameter lineRecordReader should be final. | 78 |
![]() | Method 'createVertexReader' is not designed for extension - needs to be abstract, final or empty. | 158 |
![]() | Parameter split should be final. | 160 |
![]() | Parameter context should be final. | 160 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 54 |
![]() | Parameter lineRecordWriter should be final. | 70 |
![]() | Parameter vertex should be final. | 75 |
![]() | Method 'createVertexWriter' is not designed for extension - needs to be abstract, final or empty. | 119 |
![]() | Parameter context should be final. | 120 |
![]() | First sentence should end with a period. | 54 |
![]() | Parameter lineRecordWriter should be final. | 70 |
![]() | Parameter vertex should be final. | 75 |
![]() | Method 'createVertexWriter' is not designed for extension - needs to be abstract, final or empty. | 119 |
![]() | Parameter context should be final. | 120 |
Violation | Message | Line |
---|---|---|
![]() | Method 'createVertexReader' is not designed for extension - needs to be abstract, final or empty. | 48 |
![]() | Parameter split should be final. | 50 |
![]() | Parameter context should be final. | 51 |
![]() | Parameter lineRecordReader should be final. | 77 |
![]() | Method 'createVertexReader' is not designed for extension - needs to be abstract, final or empty. | 48 |
![]() | Parameter split should be final. | 50 |
![]() | Parameter context should be final. | 51 |
![]() | Parameter lineRecordReader should be final. | 77 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 35 |
![]() | Method 'createVertexWriter' is not designed for extension - needs to be abstract, final or empty. | 42 |
![]() | Parameter context should be final. | 44 |
![]() | Parameter lineRecordWriter should be final. | 64 |
![]() | Parameter vertex should be final. | 69 |
![]() | First sentence should end with a period. | 35 |
![]() | Method 'createVertexWriter' is not designed for extension - needs to be abstract, final or empty. | 42 |
![]() | Parameter context should be final. | 44 |
![]() | Parameter lineRecordWriter should be final. | 64 |
![]() | Parameter vertex should be final. | 69 |
Violation | Message | Line |
---|---|---|
![]() | Parameter lineRecordReader should be final. | 60 |
![]() | Parameter lineRecordReader should be final. | 70 |
![]() | Parameter sanitizer should be final. | 71 |
![]() | Parameter s should be final. | 76 |
![]() | Parameter id should be final. | 76 |
![]() | Parameter s should be final. | 81 |
![]() | Parameter value should be final. | 81 |
![]() | Parameter s1 should be final. | 87 |
![]() | Parameter s2 should be final. | 88 |
![]() | Parameter textIntWritableEdge should be final. | 89 |
![]() | Method 'createVertexReader' is not designed for extension - needs to be abstract, final or empty. | 95 |
![]() | Parameter split should be final. | 98 |
![]() | Parameter context should be final. | 99 |
![]() | Parameter lineRecordReader should be final. | 60 |
![]() | Parameter lineRecordReader should be final. | 70 |
![]() | Parameter sanitizer should be final. | 71 |
![]() | Parameter s should be final. | 76 |
![]() | Parameter id should be final. | 76 |
![]() | Parameter s should be final. | 81 |
![]() | Parameter value should be final. | 81 |
![]() | Parameter s1 should be final. | 87 |
![]() | Parameter s2 should be final. | 88 |
![]() | Parameter textIntWritableEdge should be final. | 89 |
![]() | Method 'createVertexReader' is not designed for extension - needs to be abstract, final or empty. | 95 |
![]() | Parameter split should be final. | 98 |
![]() | Parameter context should be final. | 99 |
Violation | Message | Line |
---|---|---|
![]() | Method 'createVertexReader' is not designed for extension - needs to be abstract, final or empty. | 72 |
![]() | Parameter split should be final. | 74 |
![]() | Parameter context should be final. | 74 |
![]() | First sentence should end with a period. | 100 |
![]() | Parameter inputSplit should be final. | 110 |
![]() | Parameter context should be final. | 111 |
![]() | '*' should be on a new line. | 129 |
![]() | '+' should be on a new line. | 130 |
![]() | '+' should be on a new line. | 135 |
![]() | '%' should be on a new line. | 168 |
![]() | '+' should be on a new line. | 176 |
![]() | '+' should be on a new line. | 177 |
![]() | '+' should be on a new line. | 178 |
![]() | '100.0f' is a magic number. | 190 |
![]() | Method 'createVertexReader' is not designed for extension - needs to be abstract, final or empty. | 72 |
![]() | Parameter split should be final. | 74 |
![]() | Parameter context should be final. | 74 |
![]() | First sentence should end with a period. | 100 |
![]() | Parameter inputSplit should be final. | 110 |
![]() | Parameter context should be final. | 111 |
![]() | '*' should be on a new line. | 129 |
![]() | '+' should be on a new line. | 130 |
![]() | '+' should be on a new line. | 135 |
![]() | '%' should be on a new line. | 168 |
![]() | '+' should be on a new line. | 176 |
![]() | '+' should be on a new line. | 177 |
![]() | '+' should be on a new line. | 178 |
![]() | '100.0f' is a magic number. | 190 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 48 |
![]() | Variable 'sequenceFileInputFormat' must be private and have accessor methods. | 49 |
![]() | Method 'getSplits' is not designed for extension - needs to be abstract, final or empty. | 52 |
![]() | Parameter context should be final. | 53 |
![]() | Parameter numWorkers should be final. | 53 |
![]() | Method 'createVertexReader' is not designed for extension - needs to be abstract, final or empty. | 58 |
![]() | Parameter split should be final. | 59 |
![]() | Parameter context should be final. | 60 |
![]() | First sentence should end with a period. | 78 |
![]() | Parameter recordReader should be final. | 86 |
![]() | 'recordReader' hides a field. | 86 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 90 |
![]() | Parameter inputSplit should be final. | 90 |
![]() | Parameter context should be final. | 91 |
![]() | Method 'nextVertex' is not designed for extension - needs to be abstract, final or empty. | 95 |
![]() | Method 'getCurrentVertex' is not designed for extension - needs to be abstract, final or empty. | 100 |
![]() | Method 'close' is not designed for extension - needs to be abstract, final or empty. | 106 |
![]() | Method 'getProgress' is not designed for extension - needs to be abstract, final or empty. | 110 |
![]() | First sentence should end with a period. | 48 |
![]() | Variable 'sequenceFileInputFormat' must be private and have accessor methods. | 49 |
![]() | Method 'getSplits' is not designed for extension - needs to be abstract, final or empty. | 52 |
![]() | Parameter context should be final. | 53 |
![]() | Parameter numWorkers should be final. | 53 |
![]() | Method 'createVertexReader' is not designed for extension - needs to be abstract, final or empty. | 58 |
![]() | Parameter split should be final. | 59 |
![]() | Parameter context should be final. | 60 |
![]() | First sentence should end with a period. | 78 |
![]() | Parameter recordReader should be final. | 86 |
![]() | 'recordReader' hides a field. | 86 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 90 |
![]() | Parameter inputSplit should be final. | 90 |
![]() | Parameter context should be final. | 91 |
![]() | Method 'nextVertex' is not designed for extension - needs to be abstract, final or empty. | 95 |
![]() | Method 'getCurrentVertex' is not designed for extension - needs to be abstract, final or empty. | 100 |
![]() | Method 'close' is not designed for extension - needs to be abstract, final or empty. | 106 |
![]() | Method 'getProgress' is not designed for extension - needs to be abstract, final or empty. | 110 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 42 |
![]() | Parameter lineRecordReader should be final. | 55 |
![]() | First sentence should end with a period. | 59 |
![]() | Parameter lineRecordReader should be final. | 65 |
![]() | Parameter sanitizer should be final. | 66 |
![]() | Parameter s should be final. | 71 |
![]() | Parameter id should be final. | 71 |
![]() | Parameter s should be final. | 76 |
![]() | Parameter value should be final. | 76 |
![]() | Parameter s1 should be final. | 81 |
![]() | Parameter s2 should be final. | 81 |
![]() | Parameter textIntWritableEdge should be final. | 82 |
![]() | Method 'createVertexReader' is not designed for extension - needs to be abstract, final or empty. | 88 |
![]() | Parameter split should be final. | 90 |
![]() | Parameter context should be final. | 91 |
![]() | First sentence should end with a period. | 42 |
![]() | Parameter lineRecordReader should be final. | 55 |
![]() | First sentence should end with a period. | 59 |
![]() | Parameter lineRecordReader should be final. | 65 |
![]() | Parameter sanitizer should be final. | 66 |
![]() | Parameter s should be final. | 71 |
![]() | Parameter id should be final. | 71 |
![]() | Parameter s should be final. | 76 |
![]() | Parameter value should be final. | 76 |
![]() | Parameter s1 should be final. | 81 |
![]() | Parameter s2 should be final. | 81 |
![]() | Parameter textIntWritableEdge should be final. | 82 |
![]() | Method 'createVertexReader' is not designed for extension - needs to be abstract, final or empty. | 88 |
![]() | Parameter split should be final. | 90 |
![]() | Parameter context should be final. | 91 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 49 |
![]() | Variable 'textInputFormat' must be private and have accessor methods. | 50 |
![]() | First sentence should end with a period. | 64 |
![]() | First sentence should end with a period. | 66 |
![]() | Parameter lineRecordReader should be final. | 75 |
![]() | 'lineRecordReader' hides a field. | 75 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 79 |
![]() | Parameter inputSplit should be final. | 80 |
![]() | Parameter context should be final. | 80 |
![]() | 'context' hides a field. | 80 |
![]() | Method 'close' is not designed for extension - needs to be abstract, final or empty. | 86 |
![]() | Method 'getProgress' is not designed for extension - needs to be abstract, final or empty. | 91 |
![]() | Method 'getRecordReader' is not designed for extension - needs to be abstract, final or empty. | 101 |
![]() | Method 'getContext' is not designed for extension - needs to be abstract, final or empty. | 110 |
![]() | Method 'getSplits' is not designed for extension - needs to be abstract, final or empty. | 115 |
![]() | Parameter context should be final. | 116 |
![]() | Parameter numWorkers should be final. | 116 |
![]() | First sentence should end with a period. | 49 |
![]() | Variable 'textInputFormat' must be private and have accessor methods. | 50 |
![]() | First sentence should end with a period. | 64 |
![]() | First sentence should end with a period. | 66 |
![]() | Parameter lineRecordReader should be final. | 75 |
![]() | 'lineRecordReader' hides a field. | 75 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 79 |
![]() | Parameter inputSplit should be final. | 80 |
![]() | Parameter context should be final. | 80 |
![]() | 'context' hides a field. | 80 |
![]() | Method 'close' is not designed for extension - needs to be abstract, final or empty. | 86 |
![]() | Method 'getProgress' is not designed for extension - needs to be abstract, final or empty. | 91 |
![]() | Method 'getRecordReader' is not designed for extension - needs to be abstract, final or empty. | 101 |
![]() | Method 'getContext' is not designed for extension - needs to be abstract, final or empty. | 110 |
![]() | Method 'getSplits' is not designed for extension - needs to be abstract, final or empty. | 115 |
![]() | Parameter context should be final. | 116 |
![]() | Parameter numWorkers should be final. | 116 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 46 |
![]() | Variable 'textOutputFormat' must be private and have accessor methods. | 47 |
![]() | First sentence should end with a period. | 61 |
![]() | First sentence should end with a period. | 63 |
![]() | Parameter lineRecordWriter should be final. | 71 |
![]() | 'lineRecordWriter' hides a field. | 71 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 75 |
![]() | Parameter context should be final. | 76 |
![]() | 'context' hides a field. | 76 |
![]() | Method 'close' is not designed for extension - needs to be abstract, final or empty. | 80 |
![]() | Parameter context should be final. | 81 |
![]() | 'context' hides a field. | 81 |
![]() | Method 'getRecordWriter' is not designed for extension - needs to be abstract, final or empty. | 91 |
![]() | Method 'getContext' is not designed for extension - needs to be abstract, final or empty. | 100 |
![]() | Method 'checkOutputSpecs' is not designed for extension - needs to be abstract, final or empty. | 105 |
![]() | Parameter context should be final. | 106 |
![]() | Method 'getOutputCommitter' is not designed for extension - needs to be abstract, final or empty. | 111 |
![]() | Parameter context should be final. | 112 |
![]() | First sentence should end with a period. | 46 |
![]() | Variable 'textOutputFormat' must be private and have accessor methods. | 47 |
![]() | First sentence should end with a period. | 61 |
![]() | First sentence should end with a period. | 63 |
![]() | Parameter lineRecordWriter should be final. | 71 |
![]() | 'lineRecordWriter' hides a field. | 71 |
![]() | Method 'initialize' is not designed for extension - needs to be abstract, final or empty. | 75 |
![]() | Parameter context should be final. | 76 |
![]() | 'context' hides a field. | 76 |
![]() | Method 'close' is not designed for extension - needs to be abstract, final or empty. | 80 |
![]() | Parameter context should be final. | 81 |
![]() | 'context' hides a field. | 81 |
![]() | Method 'getRecordWriter' is not designed for extension - needs to be abstract, final or empty. | 91 |
![]() | Method 'getContext' is not designed for extension - needs to be abstract, final or empty. | 100 |
![]() | Method 'checkOutputSpecs' is not designed for extension - needs to be abstract, final or empty. | 105 |
![]() | Parameter context should be final. | 106 |
![]() | Method 'getOutputCommitter' is not designed for extension - needs to be abstract, final or empty. | 111 |
![]() | Parameter context should be final. | 112 |
Violation | Message | Line |
---|---|---|
![]() | Class AnnotationUtils should be declared as final. | 35 |
![]() | Parameter annotation should be final. | 50 |
![]() | Parameter packageName should be final. | 50 |
![]() | Parameter packageName should be final. | 68 |
![]() | First sentence should end with a period. | 106 |
![]() | First sentence should end with a period. | 108 |
![]() | First sentence should end with a period. | 110 |
![]() | First sentence should end with a period. | 112 |
![]() | Parameter packageName should be final. | 119 |
![]() | Expected @throws tag for 'IOException'. | 119 |
![]() | First sentence should end with a period. | 146 |
![]() | First sentence should end with a period. | 185 |
![]() | First sentence should end with a period. | 187 |
![]() | Parameter packageName should be final. | 193 |
![]() | Parameter directory should be final. | 210 |
![]() | Parameter files should be final. | 210 |
![]() | First sentence should end with a period. | 239 |
![]() | Parameter className should be final. | 245 |
![]() | Class AnnotationUtils should be declared as final. | 35 |
![]() | Parameter annotation should be final. | 50 |
![]() | Parameter packageName should be final. | 50 |
![]() | Parameter packageName should be final. | 68 |
![]() | First sentence should end with a period. | 106 |
![]() | First sentence should end with a period. | 108 |
![]() | First sentence should end with a period. | 110 |
![]() | First sentence should end with a period. | 112 |
![]() | Parameter packageName should be final. | 119 |
![]() | Expected @throws tag for 'IOException'. | 119 |
![]() | First sentence should end with a period. | 146 |
![]() | First sentence should end with a period. | 185 |
![]() | First sentence should end with a period. | 187 |
![]() | Parameter packageName should be final. | 193 |
![]() | Parameter directory should be final. | 210 |
![]() | Parameter files should be final. | 210 |
![]() | First sentence should end with a period. | 239 |
![]() | Parameter className should be final. | 245 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 40 |
![]() | First sentence should end with a period. | 43 |
![]() | First sentence should end with a period. | 46 |
![]() | Parameter arrayListWritable should be final. | 59 |
![]() | Parameter refClass should be final. | 68 |
![]() | 'refClass' hides a field. | 68 |
![]() | First sentence should end with a period. | 73 |
![]() | Method 'setClass' is not designed for extension - needs to be abstract, final or empty. | 78 |
![]() | Parameter refClass should be final. | 78 |
![]() | 'refClass' hides a field. | 78 |
![]() | '+' should be on a new line. | 81 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 93 |
![]() | Parameter in should be final. | 94 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 107 |
![]() | Parameter out should be final. | 108 |
![]() | Parameter conf should be final. | 122 |
![]() | 'conf' hides a field. | 122 |
![]() | First sentence should end with a period. | 40 |
![]() | First sentence should end with a period. | 43 |
![]() | First sentence should end with a period. | 46 |
![]() | Parameter arrayListWritable should be final. | 59 |
![]() | Parameter refClass should be final. | 68 |
![]() | 'refClass' hides a field. | 68 |
![]() | First sentence should end with a period. | 73 |
![]() | Method 'setClass' is not designed for extension - needs to be abstract, final or empty. | 78 |
![]() | Parameter refClass should be final. | 78 |
![]() | 'refClass' hides a field. | 78 |
![]() | '+' should be on a new line. | 81 |
![]() | Method 'readFields' is not designed for extension - needs to be abstract, final or empty. | 93 |
![]() | Parameter in should be final. | 94 |
![]() | Method 'write' is not designed for extension - needs to be abstract, final or empty. | 107 |
![]() | Parameter out should be final. | 108 |
![]() | Parameter conf should be final. | 122 |
![]() | 'conf' hides a field. | 122 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 24 |
![]() | Class CollectionUtils should be declared as final. | 25 |
![]() | Parameter key should be final. | 41 |
![]() | Parameter values should be final. | 42 |
![]() | Parameter map should be final. | 42 |
![]() | First sentence should end with a period. | 24 |
![]() | Class CollectionUtils should be declared as final. | 25 |
![]() | Parameter key should be final. | 41 |
![]() | Parameter values should be final. | 42 |
![]() | Parameter map should be final. | 42 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 23 |
![]() | Class ComparisonUtils should be declared as final. | 24 |
![]() | First sentence should end with a period. | 26 |
![]() | First sentence should end with a period. | 29 |
![]() | Parameter first should be final. | 37 |
![]() | Parameter second should be final. | 37 |
![]() | First sentence should end with a period. | 41 |
![]() | Parameter first should be final. | 49 |
![]() | Parameter second should be final. | 49 |
![]() | Avoid inline conditionals. | 54 |
![]() | ':' should be on a new line. | 54 |
![]() | First sentence should end with a period. | 23 |
![]() | Class ComparisonUtils should be declared as final. | 24 |
![]() | First sentence should end with a period. | 26 |
![]() | First sentence should end with a period. | 29 |
![]() | Parameter first should be final. | 37 |
![]() | Parameter second should be final. | 37 |
![]() | First sentence should end with a period. | 41 |
![]() | Parameter first should be final. | 49 |
![]() | Parameter second should be final. | 49 |
![]() | Avoid inline conditionals. | 54 |
![]() | ':' should be on a new line. | 54 |
Violation | Message | Line |
---|---|---|
![]() | Method 'iterator' is not designed for extension - needs to be abstract, final or empty. | 30 |
![]() | Method 'hasNext' is not designed for extension - needs to be abstract, final or empty. | 35 |
![]() | Method 'next' is not designed for extension - needs to be abstract, final or empty. | 40 |
![]() | Method 'remove' is not designed for extension - needs to be abstract, final or empty. | 45 |
![]() | Method 'iterator' is not designed for extension - needs to be abstract, final or empty. | 30 |
![]() | Method 'hasNext' is not designed for extension - needs to be abstract, final or empty. | 35 |
![]() | Method 'next' is not designed for extension - needs to be abstract, final or empty. | 40 |
![]() | Method 'remove' is not designed for extension - needs to be abstract, final or empty. | 45 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 29 |
![]() | Method 'getMilliseconds' is not designed for extension - needs to be abstract, final or empty. | 32 |
![]() | Method 'getNanoseconds' is not designed for extension - needs to be abstract, final or empty. | 37 |
![]() | Method 'getSeconds' is not designed for extension - needs to be abstract, final or empty. | 42 |
![]() | Method 'getCurrentDate' is not designed for extension - needs to be abstract, final or empty. | 47 |
![]() | Method 'sleep' is not designed for extension - needs to be abstract, final or empty. | 52 |
![]() | Parameter milliseconds should be final. | 53 |
![]() | First sentence should end with a period. | 29 |
![]() | Method 'getMilliseconds' is not designed for extension - needs to be abstract, final or empty. | 32 |
![]() | Method 'getNanoseconds' is not designed for extension - needs to be abstract, final or empty. | 37 |
![]() | Method 'getSeconds' is not designed for extension - needs to be abstract, final or empty. | 42 |
![]() | Method 'getCurrentDate' is not designed for extension - needs to be abstract, final or empty. | 47 |
![]() | Method 'sleep' is not designed for extension - needs to be abstract, final or empty. | 52 |
![]() | Parameter milliseconds should be final. | 53 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 33 |
![]() | Class FileUtils should be declared as final. | 36 |
![]() | First sentence should end with a period. | 38 |
![]() | Parameter vertexClass should be final. | 50 |
![]() | Expected @throws tag for 'IOException'. | 51 |
![]() | '+' should be on a new line. | 54 |
![]() | Parameter parent should be final. | 71 |
![]() | Parameter name should be final. | 71 |
![]() | Expected @throws tag for 'IOException'. | 72 |
![]() | Parameter parent should be final. | 84 |
![]() | Parameter name should be final. | 84 |
![]() | Expected @throws tag for 'IOException'. | 85 |
![]() | Parameter parent should be final. | 100 |
![]() | Parameter name should be final. | 100 |
![]() | Parameter dir should be final. | 101 |
![]() | Expected @throws tag for 'IOException'. | 101 |
![]() | Parameter file should be final. | 117 |
![]() | Parameter lines should be final. | 117 |
![]() | Expected @throws tag for 'IOException'. | 118 |
![]() | First sentence should end with a period. | 130 |
![]() | Parameter dir should be final. | 135 |
![]() | Parameter f should be final. | 146 |
![]() | Parameter conf should be final. | 162 |
![]() | Parameter path should be final. | 162 |
![]() | Expected @throws tag for 'IOException'. | 163 |
![]() | Parameter conf should be final. | 174 |
![]() | Parameter path should be final. | 174 |
![]() | Expected @throws tag for 'IOException'. | 175 |
![]() | First sentence should end with a period. | 33 |
![]() | Class FileUtils should be declared as final. | 36 |
![]() | First sentence should end with a period. | 38 |
![]() | Parameter vertexClass should be final. | 50 |
![]() | Expected @throws tag for 'IOException'. | 51 |
![]() | '+' should be on a new line. | 54 |
![]() | Parameter parent should be final. | 71 |
![]() | Parameter name should be final. | 71 |
![]() | Expected @throws tag for 'IOException'. | 72 |
![]() | Parameter parent should be final. | 84 |
![]() | Parameter name should be final. | 84 |
![]() | Expected @throws tag for 'IOException'. | 85 |
![]() | Parameter parent should be final. | 100 |
![]() | Parameter name should be final. | 100 |
![]() | Parameter dir should be final. | 101 |
![]() | Expected @throws tag for 'IOException'. | 101 |
![]() | Parameter file should be final. | 117 |
![]() | Parameter lines should be final. | 117 |
![]() | Expected @throws tag for 'IOException'. | 118 |
![]() | First sentence should end with a period. | 130 |
![]() | Parameter dir should be final. | 135 |
![]() | Parameter f should be final. | 146 |
![]() | Parameter conf should be final. | 162 |
![]() | Parameter path should be final. | 162 |
![]() | Expected @throws tag for 'IOException'. | 163 |
![]() | Parameter conf should be final. | 174 |
![]() | Parameter path should be final. | 174 |
![]() | Expected @throws tag for 'IOException'. | 175 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 31 |
![]() | First sentence should end with a period. | 33 |
![]() | First sentence should end with a period. | 35 |
![]() | Method 'add' is not designed for extension - needs to be abstract, final or empty. | 44 |
![]() | Parameter key should be final. | 44 |
![]() | First sentence should end with a period. | 64 |
![]() | Method 'cardinality' is not designed for extension - needs to be abstract, final or empty. | 69 |
![]() | First sentence should end with a period. | 74 |
![]() | Method 'size' is not designed for extension - needs to be abstract, final or empty. | 79 |
![]() | First sentence should end with a period. | 83 |
![]() | Method 'has' is not designed for extension - needs to be abstract, final or empty. | 89 |
![]() | Parameter key should be final. | 89 |
![]() | Method 'getLastBaseKey' is not designed for extension - needs to be abstract, final or empty. | 104 |
![]() | First sentence should end with a period. | 108 |
![]() | Parameter remainder should be final. | 113 |
![]() | '+' should be on a new line. | 116 |
![]() | '+' should be on a new line. | 117 |
![]() | '+' should be on a new line. | 118 |
![]() | First sentence should end with a period. | 31 |
![]() | First sentence should end with a period. | 33 |
![]() | First sentence should end with a period. | 35 |
![]() | Method 'add' is not designed for extension - needs to be abstract, final or empty. | 44 |
![]() | Parameter key should be final. | 44 |
![]() | First sentence should end with a period. | 64 |
![]() | Method 'cardinality' is not designed for extension - needs to be abstract, final or empty. | 69 |
![]() | First sentence should end with a period. | 74 |
![]() | Method 'size' is not designed for extension - needs to be abstract, final or empty. | 79 |
![]() | First sentence should end with a period. | 83 |
![]() | Method 'has' is not designed for extension - needs to be abstract, final or empty. | 89 |
![]() | Parameter key should be final. | 89 |
![]() | Method 'getLastBaseKey' is not designed for extension - needs to be abstract, final or empty. | 104 |
![]() | First sentence should end with a period. | 108 |
![]() | Parameter remainder should be final. | 113 |
![]() | '+' should be on a new line. | 116 |
![]() | '+' should be on a new line. | 117 |
![]() | '+' should be on a new line. | 118 |
Violation | Message | Line |
---|---|---|
![]() | Class InternalVertexRunner should be declared as final. | 49 |
![]() | First sentence should end with a period. | 50 |
![]() | Parameter vertexClass should be final. | 71 |
![]() | Parameter vertexInputFormatClass should be final. | 72 |
![]() | Parameter vertexOutputFormatClass should be final. | 72 |
![]() | Parameter params should be final. | 73 |
![]() | Parameter data should be final. | 73 |
![]() | Expected @throws tag for 'Exception'. | 73 |
![]() | Parameter vertexClass should be final. | 92 |
![]() | Parameter vertexCombinerClass should be final. | 93 |
![]() | Parameter vertexInputFormatClass should be final. | 93 |
![]() | Parameter vertexOutputFormatClass should be final. | 94 |
![]() | Parameter params should be final. | 94 |
![]() | Parameter data should be final. | 95 |
![]() | Expected @throws tag for 'Exception'. | 95 |
![]() | '100.0f' is a magic number. | 120 |
![]() | '+' should be on a new line. | 124 |
![]() | First sentence should end with a period. | 189 |
![]() | Class InternalVertexRunner should be declared as final. | 49 |
![]() | First sentence should end with a period. | 50 |
![]() | Parameter vertexClass should be final. | 71 |
![]() | Parameter vertexInputFormatClass should be final. | 72 |
![]() | Parameter vertexOutputFormatClass should be final. | 72 |
![]() | Parameter params should be final. | 73 |
![]() | Parameter data should be final. | 73 |
![]() | Expected @throws tag for 'Exception'. | 73 |
![]() | Parameter vertexClass should be final. | 92 |
![]() | Parameter vertexCombinerClass should be final. | 93 |
![]() | Parameter vertexInputFormatClass should be final. | 93 |
![]() | Parameter vertexOutputFormatClass should be final. | 94 |
![]() | Parameter params should be final. | 94 |
![]() | Parameter data should be final. | 95 |
![]() | Expected @throws tag for 'Exception'. | 95 |
![]() | '100.0f' is a magic number. | 120 |
![]() | '+' should be on a new line. | 124 |
![]() | First sentence should end with a period. | 189 |
Violation | Message | Line |
---|---|---|
![]() | Class MemoryUtils should be declared as final. | 24 |
![]() | First sentence should end with a period. | 28 |
![]() | '+' should be on a new line. | 34 |
![]() | '1024f' is a magic number. | 35 |
![]() | '1024f' is a magic number. | 35 |
![]() | '+' should be on a new line. | 35 |
![]() | '+' should be on a new line. | 36 |
![]() | '1024f' is a magic number. | 37 |
![]() | '1024f' is a magic number. | 37 |
![]() | '+' should be on a new line. | 37 |
![]() | '+' should be on a new line. | 38 |
![]() | '1024f' is a magic number. | 39 |
![]() | '1024f' is a magic number. | 39 |
![]() | Class MemoryUtils should be declared as final. | 24 |
![]() | First sentence should end with a period. | 28 |
![]() | '+' should be on a new line. | 34 |
![]() | '1024f' is a magic number. | 35 |
![]() | '1024f' is a magic number. | 35 |
![]() | '+' should be on a new line. | 35 |
![]() | '+' should be on a new line. | 36 |
![]() | '1024f' is a magic number. | 37 |
![]() | '1024f' is a magic number. | 37 |
![]() | '+' should be on a new line. | 37 |
![]() | '+' should be on a new line. | 38 |
![]() | '1024f' is a magic number. | 39 |
![]() | '1024f' is a magic number. | 39 |
Violation | Message | Line |
---|---|---|
![]() | Class ReflectionUtils should be declared as final. | 38 |
![]() | Parameter type should be final. | 51 |
![]() | Parameter baseClass should be final. | 80 |
![]() | Parameter childClass should be final. | 80 |
![]() | '!' is followed by whitespace. | 84 |
![]() | Parameter target should be final. | 135 |
![]() | Parameter fieldname should be final. | 135 |
![]() | Parameter value should be final. | 135 |
![]() | Expected @throws tag for 'NoSuchFieldException'. | 136 |
![]() | Expected @throws tag for 'IllegalAccessException'. | 136 |
![]() | First sentence should end with a period. | 142 |
![]() | Parameter inClass should be final. | 150 |
![]() | Parameter fieldname should be final. | 150 |
![]() | Class ReflectionUtils should be declared as final. | 38 |
![]() | Parameter type should be final. | 51 |
![]() | Parameter baseClass should be final. | 80 |
![]() | Parameter childClass should be final. | 80 |
![]() | '!' is followed by whitespace. | 84 |
![]() | Parameter target should be final. | 135 |
![]() | Parameter fieldname should be final. | 135 |
![]() | Parameter value should be final. | 135 |
![]() | Expected @throws tag for 'NoSuchFieldException'. | 136 |
![]() | Expected @throws tag for 'IllegalAccessException'. | 136 |
![]() | First sentence should end with a period. | 142 |
![]() | Parameter inClass should be final. | 150 |
![]() | Parameter fieldname should be final. | 150 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 28 |
![]() | Method 'getMilliseconds' is not designed for extension - needs to be abstract, final or empty. | 33 |
![]() | Method 'getNanoseconds' is not designed for extension - needs to be abstract, final or empty. | 38 |
![]() | Method 'getSeconds' is not designed for extension - needs to be abstract, final or empty. | 43 |
![]() | Method 'getCurrentDate' is not designed for extension - needs to be abstract, final or empty. | 48 |
![]() | Method 'sleep' is not designed for extension - needs to be abstract, final or empty. | 53 |
![]() | Parameter milliseconds should be final. | 54 |
![]() | First sentence should end with a period. | 58 |
![]() | First sentence should end with a period. | 28 |
![]() | Method 'getMilliseconds' is not designed for extension - needs to be abstract, final or empty. | 33 |
![]() | Method 'getNanoseconds' is not designed for extension - needs to be abstract, final or empty. | 38 |
![]() | Method 'getSeconds' is not designed for extension - needs to be abstract, final or empty. | 43 |
![]() | Method 'getCurrentDate' is not designed for extension - needs to be abstract, final or empty. | 48 |
![]() | Method 'sleep' is not designed for extension - needs to be abstract, final or empty. | 53 |
![]() | Parameter milliseconds should be final. | 54 |
![]() | First sentence should end with a period. | 58 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 28 |
![]() | First sentence should end with a period. | 30 |
![]() | First sentence should end with a period. | 32 |
![]() | First sentence should end with a period. | 34 |
![]() | First sentence should end with a period. | 36 |
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 40 |
![]() | First sentence should end with a period. | 42 |
![]() | First sentence should end with a period. | 44 |
![]() | First sentence should end with a period. | 46 |
![]() | First sentence should end with a period. | 49 |
![]() | First sentence should end with a period. | 58 |
![]() | First sentence should end with a period. | 66 |
![]() | First sentence should end with a period. | 74 |
![]() | First sentence should end with a period. | 81 |
![]() | Expected @throws tag for 'InterruptedException'. | 87 |
![]() | First sentence should end with a period. | 28 |
![]() | First sentence should end with a period. | 30 |
![]() | First sentence should end with a period. | 32 |
![]() | First sentence should end with a period. | 34 |
![]() | First sentence should end with a period. | 36 |
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 40 |
![]() | First sentence should end with a period. | 42 |
![]() | First sentence should end with a period. | 44 |
![]() | First sentence should end with a period. | 46 |
![]() | First sentence should end with a period. | 49 |
![]() | First sentence should end with a period. | 58 |
![]() | First sentence should end with a period. | 66 |
![]() | First sentence should end with a period. | 74 |
![]() | First sentence should end with a period. | 81 |
![]() | Expected @throws tag for 'InterruptedException'. | 87 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 29 |
![]() | First sentence should end with a period. | 31 |
![]() | First sentence should end with a period. | 34 |
![]() | Parameter msecs should be final. | 40 |
![]() | 'msecs' hides a field. | 40 |
![]() | Parameter log should be final. | 40 |
![]() | 'log' hides a field. | 40 |
![]() | Method 'info' is not designed for extension - needs to be abstract, final or empty. | 50 |
![]() | Parameter msg should be final. | 50 |
![]() | Method 'isPrintable' is not designed for extension - needs to be abstract, final or empty. | 61 |
![]() | First sentence should end with a period. | 27 |
![]() | First sentence should end with a period. | 29 |
![]() | First sentence should end with a period. | 31 |
![]() | First sentence should end with a period. | 34 |
![]() | Parameter msecs should be final. | 40 |
![]() | 'msecs' hides a field. | 40 |
![]() | Parameter log should be final. | 40 |
![]() | 'log' hides a field. | 40 |
![]() | Method 'info' is not designed for extension - needs to be abstract, final or empty. | 50 |
![]() | Parameter msg should be final. | 50 |
![]() | Method 'isPrintable' is not designed for extension - needs to be abstract, final or empty. | 61 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 24 |
![]() | First sentence should end with a period. | 29 |
![]() | First sentence should end with a period. | 31 |
![]() | Parameter intArray should be final. | 39 |
![]() | 'intArray' hides a field. | 39 |
![]() | Method 'hasNext' is not designed for extension - needs to be abstract, final or empty. | 44 |
![]() | Method 'next' is not designed for extension - needs to be abstract, final or empty. | 49 |
![]() | First sentence should end with a period. | 24 |
![]() | First sentence should end with a period. | 29 |
![]() | First sentence should end with a period. | 31 |
![]() | Parameter intArray should be final. | 39 |
![]() | 'intArray' hides a field. | 39 |
![]() | Method 'hasNext' is not designed for extension - needs to be abstract, final or empty. | 44 |
![]() | Method 'next' is not designed for extension - needs to be abstract, final or empty. | 49 |
Violation | Message | Line |
---|---|---|
![]() | Class WritableUtils should be declared as final. | 43 |
![]() | Parameter byteArray should be final. | 56 |
![]() | Parameter writableObject should be final. | 56 |
![]() | Parameter zkExt should be final. | 76 |
![]() | Parameter zkPath should be final. | 77 |
![]() | Parameter watch should be final. | 78 |
![]() | Parameter stat should be final. | 79 |
![]() | Parameter writableObject should be final. | 80 |
![]() | Parameter writableObject should be final. | 99 |
![]() | Parameter zkExt should be final. | 121 |
![]() | Parameter zkPath should be final. | 122 |
![]() | Parameter version should be final. | 123 |
![]() | Parameter writableObject should be final. | 124 |
![]() | Parameter writableList should be final. | 149 |
![]() | Parameter zkExt should be final. | 174 |
![]() | Parameter zkPath should be final. | 175 |
![]() | Parameter version should be final. | 176 |
![]() | Parameter writableList should be final. | 177 |
![]() | Parameter byteArray should be final. | 204 |
![]() | Parameter writableClass should be final. | 205 |
![]() | Parameter conf should be final. | 206 |
![]() | Parameter zkExt should be final. | 237 |
![]() | Parameter zkPath should be final. | 238 |
![]() | Parameter watch should be final. | 239 |
![]() | Parameter stat should be final. | 240 |
![]() | Parameter writableClass should be final. | 241 |
![]() | Parameter conf should be final. | 242 |
![]() | Class WritableUtils should be declared as final. | 43 |
![]() | Parameter byteArray should be final. | 56 |
![]() | Parameter writableObject should be final. | 56 |
![]() | Parameter zkExt should be final. | 76 |
![]() | Parameter zkPath should be final. | 77 |
![]() | Parameter watch should be final. | 78 |
![]() | Parameter stat should be final. | 79 |
![]() | Parameter writableObject should be final. | 80 |
![]() | Parameter writableObject should be final. | 99 |
![]() | Parameter zkExt should be final. | 121 |
![]() | Parameter zkPath should be final. | 122 |
![]() | Parameter version should be final. | 123 |
![]() | Parameter writableObject should be final. | 124 |
![]() | Parameter writableList should be final. | 149 |
![]() | Parameter zkExt should be final. | 174 |
![]() | Parameter zkPath should be final. | 175 |
![]() | Parameter version should be final. | 176 |
![]() | Parameter writableList should be final. | 177 |
![]() | Parameter byteArray should be final. | 204 |
![]() | Parameter writableClass should be final. | 205 |
![]() | Parameter conf should be final. | 206 |
![]() | Parameter zkExt should be final. | 237 |
![]() | Parameter zkPath should be final. | 238 |
![]() | Parameter watch should be final. | 239 |
![]() | Parameter stat should be final. | 240 |
![]() | Parameter writableClass should be final. | 241 |
![]() | Parameter conf should be final. | 242 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 36 |
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 40 |
![]() | Variable 'progressable' must be private and have accessor methods. | 41 |
![]() | First sentence should end with a period. | 42 |
![]() | First sentence should end with a period. | 44 |
![]() | First sentence should end with a period. | 46 |
![]() | First sentence should end with a period. | 48 |
![]() | First sentence should end with a period. | 50 |
![]() | Parameter progressable should be final. | 58 |
![]() | 'progressable' hides a field. | 58 |
![]() | Parameter progressable should be final. | 69 |
![]() | 'progressable' hides a field. | 69 |
![]() | Parameter msecPeriod should be final. | 69 |
![]() | 'msecPeriod' hides a field. | 69 |
![]() | Parameter time should be final. | 69 |
![]() | 'time' hides a field. | 69 |
![]() | Method 'reset' is not designed for extension - needs to be abstract, final or empty. | 75 |
![]() | Method 'signal' is not designed for extension - needs to be abstract, final or empty. | 85 |
![]() | Method 'waitMsecs' is not designed for extension - needs to be abstract, final or empty. | 96 |
![]() | Parameter msecs should be final. | 97 |
![]() | '+' should be on a new line. | 115 |
![]() | '+' should be on a new line. | 120 |
![]() | '+' should be on a new line. | 121 |
![]() | Method 'waitForever' is not designed for extension - needs to be abstract, final or empty. | 136 |
![]() | First sentence should end with a period. | 36 |
![]() | First sentence should end with a period. | 38 |
![]() | First sentence should end with a period. | 40 |
![]() | Variable 'progressable' must be private and have accessor methods. | 41 |
![]() | First sentence should end with a period. | 42 |
![]() | First sentence should end with a period. | 44 |
![]() | First sentence should end with a period. | 46 |
![]() | First sentence should end with a period. | 48 |
![]() | First sentence should end with a period. | 50 |
![]() | Parameter progressable should be final. | 58 |
![]() | 'progressable' hides a field. | 58 |
![]() | Parameter progressable should be final. | 69 |
![]() | 'progressable' hides a field. | 69 |
![]() | Parameter msecPeriod should be final. | 69 |
![]() | 'msecPeriod' hides a field. | 69 |
![]() | Parameter time should be final. | 69 |
![]() | 'time' hides a field. | 69 |
![]() | Method 'reset' is not designed for extension - needs to be abstract, final or empty. | 75 |
![]() | Method 'signal' is not designed for extension - needs to be abstract, final or empty. | 85 |
![]() | Method 'waitMsecs' is not designed for extension - needs to be abstract, final or empty. | 96 |
![]() | Parameter msecs should be final. | 97 |
![]() | '+' should be on a new line. | 115 |
![]() | '+' should be on a new line. | 120 |
![]() | '+' should be on a new line. | 121 |
![]() | Method 'waitForever' is not designed for extension - needs to be abstract, final or empty. | 136 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 42 |
![]() | First sentence should end with a period. | 44 |
![]() | First sentence should end with a period. | 47 |
![]() | Parameter connectString should be final. | 64 |
![]() | Parameter sessionTimeout should be final. | 65 |
![]() | Parameter watcher should be final. | 66 |
![]() | Expected @throws tag for 'IOException'. | 66 |
![]() | Method 'createExt' is not designed for extension - needs to be abstract, final or empty. | 84 |
![]() | Parameter data should be final. | 86 |
![]() | Parameter acl should be final. | 87 |
![]() | Parameter createMode should be final. | 88 |
![]() | Parameter recursive should be final. | 89 |
![]() | Expected @throws tag for 'KeeperException'. | 89 |
![]() | Expected @throws tag for 'InterruptedException'. | 89 |
![]() | '+' should be on a new line. | 113 |
![]() | First sentence should end with a period. | 121 |
![]() | First sentence should end with a period. | 125 |
![]() | First sentence should end with a period. | 127 |
![]() | First sentence should end with a period. | 130 |
![]() | Parameter path should be final. | 136 |
![]() | 'path' hides a field. | 136 |
![]() | Parameter stat should be final. | 136 |
![]() | 'stat' hides a field. | 136 |
![]() | Method 'getPath' is not designed for extension - needs to be abstract, final or empty. | 146 |
![]() | First sentence should end with a period. | 150 |
![]() | Method 'getStat' is not designed for extension - needs to be abstract, final or empty. | 155 |
![]() | Method 'createOrSetExt' is not designed for extension - needs to be abstract, final or empty. | 173 |
![]() | Parameter data should be final. | 174 |
![]() | Parameter acl should be final. | 175 |
![]() | Parameter createMode should be final. | 176 |
![]() | Parameter recursive should be final. | 177 |
![]() | Parameter version should be final. | 178 |
![]() | Expected @throws tag for 'KeeperException'. | 178 |
![]() | Expected @throws tag for 'InterruptedException'. | 178 |
![]() | First sentence should end with a period. | 192 |
![]() | Method 'createOnceExt' is not designed for extension - needs to be abstract, final or empty. | 204 |
![]() | Parameter data should be final. | 205 |
![]() | Parameter acl should be final. | 206 |
![]() | Parameter createMode should be final. | 207 |
![]() | Parameter recursive should be final. | 208 |
![]() | Expected @throws tag for 'KeeperException'. | 208 |
![]() | Expected @throws tag for 'InterruptedException'. | 208 |
![]() | Method 'deleteExt' is not designed for extension - needs to be abstract, final or empty. | 231 |
![]() | Parameter version should be final. | 231 |
![]() | Parameter recursive should be final. | 231 |
![]() | Expected @throws tag for 'InterruptedException'. | 232 |
![]() | Expected @throws tag for 'KeeperException'. | 232 |
![]() | Method 'getChildrenExt' is not designed for extension - needs to be abstract, final or empty. | 268 |
![]() | Parameter watch should be final. | 270 |
![]() | Parameter sequenceSorted should be final. | 271 |
![]() | Parameter fullPath should be final. | 272 |
![]() | Expected @throws tag for 'KeeperException'. | 272 |
![]() | Expected @throws tag for 'InterruptedException'. | 272 |
![]() | Parameter s1 should be final. | 277 |
![]() | Parameter s2 should be final. | 277 |
![]() | '||' should be on a new line. | 278 |
![]() | '+' should be on a new line. | 281 |
![]() | '+' should be on a new line. | 282 |
![]() | '+' should be on a new line. | 283 |
![]() | '+' should be on a new line. | 284 |
![]() | '-' should be on a new line. | 288 |
![]() | '-' should be on a new line. | 291 |
![]() | First sentence should end with a period. | 42 |
![]() | First sentence should end with a period. | 44 |
![]() | First sentence should end with a period. | 47 |
![]() | Parameter connectString should be final. | 64 |
![]() | Parameter sessionTimeout should be final. | 65 |
![]() | Parameter watcher should be final. | 66 |
![]() | Expected @throws tag for 'IOException'. | 66 |
![]() | Method 'createExt' is not designed for extension - needs to be abstract, final or empty. | 84 |
![]() | Parameter data should be final. | 86 |
![]() | Parameter acl should be final. | 87 |
![]() | Parameter createMode should be final. | 88 |
![]() | Parameter recursive should be final. | 89 |
![]() | Expected @throws tag for 'KeeperException'. | 89 |
![]() | Expected @throws tag for 'InterruptedException'. | 89 |
![]() | '+' should be on a new line. | 113 |
![]() | First sentence should end with a period. | 121 |
![]() | First sentence should end with a period. | 125 |
![]() | First sentence should end with a period. | 127 |
![]() | First sentence should end with a period. | 130 |
![]() | Parameter path should be final. | 136 |
![]() | 'path' hides a field. | 136 |
![]() | Parameter stat should be final. | 136 |
![]() | 'stat' hides a field. | 136 |
![]() | Method 'getPath' is not designed for extension - needs to be abstract, final or empty. | 146 |
![]() | First sentence should end with a period. | 150 |
![]() | Method 'getStat' is not designed for extension - needs to be abstract, final or empty. | 155 |
![]() | Method 'createOrSetExt' is not designed for extension - needs to be abstract, final or empty. | 173 |
![]() | Parameter data should be final. | 174 |
![]() | Parameter acl should be final. | 175 |
![]() | Parameter createMode should be final. | 176 |
![]() | Parameter recursive should be final. | 177 |
![]() | Parameter version should be final. | 178 |
![]() | Expected @throws tag for 'KeeperException'. | 178 |
![]() | Expected @throws tag for 'InterruptedException'. | 178 |
![]() | First sentence should end with a period. | 192 |
![]() | Method 'createOnceExt' is not designed for extension - needs to be abstract, final or empty. | 204 |
![]() | Parameter data should be final. | 205 |
![]() | Parameter acl should be final. | 206 |
![]() | Parameter createMode should be final. | 207 |
![]() | Parameter recursive should be final. | 208 |
![]() | Expected @throws tag for 'KeeperException'. | 208 |
![]() | Expected @throws tag for 'InterruptedException'. | 208 |
![]() | Method 'deleteExt' is not designed for extension - needs to be abstract, final or empty. | 231 |
![]() | Parameter version should be final. | 231 |
![]() | Parameter recursive should be final. | 231 |
![]() | Expected @throws tag for 'InterruptedException'. | 232 |
![]() | Expected @throws tag for 'KeeperException'. | 232 |
![]() | Method 'getChildrenExt' is not designed for extension - needs to be abstract, final or empty. | 268 |
![]() | Parameter watch should be final. | 270 |
![]() | Parameter sequenceSorted should be final. | 271 |
![]() | Parameter fullPath should be final. | 272 |
![]() | Expected @throws tag for 'KeeperException'. | 272 |
![]() | Expected @throws tag for 'InterruptedException'. | 272 |
![]() | Parameter s1 should be final. | 277 |
![]() | Parameter s2 should be final. | 277 |
![]() | '||' should be on a new line. | 278 |
![]() | '+' should be on a new line. | 281 |
![]() | '+' should be on a new line. | 282 |
![]() | '+' should be on a new line. | 283 |
![]() | '+' should be on a new line. | 284 |
![]() | '-' should be on a new line. | 288 |
![]() | '-' should be on a new line. | 291 |
Violation | Message | Line |
---|---|---|
![]() | First sentence should end with a period. | 59 |
![]() | First sentence should end with a period. | 61 |
![]() | First sentence should end with a period. | 63 |
![]() | First sentence should end with a period. | 66 |
![]() | First sentence should end with a period. | 68 |
![]() | First sentence should end with a period. | 70 |
![]() | First sentence should end with a period. | 72 |
![]() | First sentence should end with a period. | 74 |
![]() | First sentence should end with a period. | 76 |
![]() | First sentence should end with a period. | 81 |
![]() | First sentence should end with a period. | 86 |
![]() | First sentence should end with a period. | 88 |
![]() | First sentence should end with a period. | 90 |
![]() | First sentence should end with a period. | 92 |
![]() | First sentence should end with a period. | 94 |
![]() | First sentence should end with a period. | 96 |
![]() | First sentence should end with a period. | 98 |
![]() | First sentence should end with a period. | 100 |
![]() | First sentence should end with a period. | 102 |
![]() | First sentence should end with a period. | 104 |
![]() | First sentence should end with a period. | 106 |
![]() | First sentence should end with a period. | 108 |
![]() | First sentence should end with a period. | 110 |
![]() | First sentence should end with a period. | 112 |
![]() | First sentence should end with a period. | 118 |
![]() | First sentence should end with a period. | 120 |
![]() | First sentence should end with a period. | 122 |
![]() | Parameter context should be final. | 132 |
![]() | 'context' hides a field. | 132 |
![]() | Expected @throws tag for 'IOException'. | 133 |
![]() | '+' should be on a new line. | 146 |
![]() | '+' should be on a new line. | 156 |
![]() | '+' should be on a new line. | 159 |
![]() | First sentence should end with a period. | 173 |
![]() | First sentence should end with a period. | 182 |
![]() | Parameter conf should be final. | 190 |
![]() | '+' should be on a new line. | 193 |
![]() | First sentence should end with a period. | 204 |
![]() | First sentence should end with a period. | 206 |
![]() | 'is' hides a field. | 214 |
![]() | Method 'setup' is not designed for extension - needs to be abstract, final or empty. | 243 |
![]() | Expected @throws tag for 'IOException'. | 243 |
![]() | Expected @throws tag for 'InterruptedException'. | 243 |
![]() | Method 'createCandidateStamp' is not designed for extension - needs to be abstract, final or empty. | 252 |
![]() | '+' should be on a new line. | 255 |
![]() | '+' should be on a new line. | 258 |
![]() | '+' should be on a new line. | 265 |
![]() | '+' should be on a new line. | 270 |
![]() | '+' should be on a new line. | 271 |
![]() | '+' should be on a new line. | 272 |
![]() | '+' should be on a new line. | 273 |
![]() | '+' should be on a new line. | 278 |
![]() | '+' should be on a new line. | 282 |
![]() | '+' should be on a new line. | 287 |
![]() | '+' should be on a new line. | 299 |
![]() | '+' should be on a new line. | 303 |
![]() | Method 'computationDone' is not designed for extension - needs to be abstract, final or empty. | 312 |
![]() | Expected @throws tag for 'IOException'. | 327 |
![]() | Expected @throws tag for 'InterruptedException'. | 328 |
![]() | '+' should be on a new line. | 341 |
![]() | '+' should be on a new line. | 342 |
![]() | '+' should be on a new line. | 351 |
![]() | '+' should be on a new line. | 352 |
![]() | '+' should be on a new line. | 353 |
![]() | '+' should be on a new line. | 354 |
![]() | '+' should be on a new line. | 355 |
![]() | '+' should be on a new line. | 356 |
![]() | ':' should be on a new line. | 370 |
![]() | '+' should be on a new line. | 372 |
![]() | '+' should be on a new line. | 373 |
![]() | '+' should be on a new line. | 382 |
![]() | Expected @throws tag for 'IOException'. | 395 |
![]() | Expected @throws tag for 'IOException'. | 415 |
![]() | Expected @throws tag for 'InterruptedException'. | 416 |
![]() | '+' should be on a new line. | 429 |
![]() | '+' should be on a new line. | 430 |
![]() | '+' should be on a new line. | 431 |
![]() | '+' should be on a new line. | 440 |
![]() | '+' should be on a new line. | 450 |
![]() | '+' should be on a new line. | 451 |
![]() | '+' should be on a new line. | 456 |
![]() | '+' should be on a new line. | 457 |
![]() | '+' should be on a new line. | 458 |
![]() | First sentence should end with a period. | 475 |
![]() | Method 'getZooKeeperServerPortString' is not designed for extension - needs to be abstract, final or empty. | 479 |
![]() | Parameter serverList should be final. | 489 |
![]() | '+' should be on a new line. | 491 |
![]() | '+' should be on a new line. | 492 |
![]() | '+' should be on a new line. | 499 |
![]() | '+' should be on a new line. | 505 |
![]() | '+' should be on a new line. | 510 |
![]() | '+' should be on a new line. | 516 |
![]() | '+' should be on a new line. | 523 |
![]() | '+' should be on a new line. | 527 |
![]() | '+' should be on a new line. | 528 |
![]() | '+' should be on a new line. | 530 |
![]() | '+' should be on a new line. | 531 |
![]() | '+' should be on a new line. | 533 |
![]() | '+' should be on a new line. | 534 |
![]() | '+' should be on a new line. | 536 |
![]() | '+' should be on a new line. | 538 |
![]() | '+' should be on a new line. | 540 |
![]() | '+' should be on a new line. | 545 |
![]() | '+' should be on a new line. | 546 |
![]() | Method 'onlineZooKeeperServers' is not designed for extension - needs to be abstract, final or empty. | 572 |
![]() | Method length is 185 lines (max allowed is 150). | 572 |
![]() | '+' should be on a new line. | 578 |
![]() | '+' should be on a new line. | 583 |
![]() | '+' should be on a new line. | 613 |
![]() | '+' should be on a new line. | 614 |
![]() | '+' should be on a new line. | 628 |
![]() | '+' should be on a new line. | 629 |
![]() | '+' should be on a new line. | 638 |
![]() | '+' should be on a new line. | 650 |
![]() | '+' should be on a new line. | 651 |
![]() | '+' should be on a new line. | 652 |
![]() | '+' should be on a new line. | 653 |
![]() | '+' should be on a new line. | 654 |
![]() | '5000' is a magic number. | 660 |
![]() | '+' should be on a new line. | 662 |
![]() | '+' should be on a new line. | 667 |
![]() | '+' should be on a new line. | 670 |
![]() | '+' should be on a new line. | 673 |
![]() | '+' should be on a new line. | 681 |
![]() | '+' should be on a new line. | 687 |
![]() | '+' should be on a new line. | 691 |
![]() | '+' should be on a new line. | 695 |
![]() | '+' should be on a new line. | 700 |
![]() | '&&' should be on a new line. | 711 |
![]() | '+' should be on a new line. | 719 |
![]() | '+' should be on a new line. | 720 |
![]() | '+' should be on a new line. | 726 |
![]() | '+' should be on a new line. | 727 |
![]() | '+' should be on a new line. | 728 |
![]() | '+' should be on a new line. | 729 |
![]() | '+' should be on a new line. | 730 |
![]() | '+' should be on a new line. | 731 |
![]() | '+' should be on a new line. | 732 |
![]() | '+' should be on a new line. | 733 |
![]() | '+' should be on a new line. | 741 |
![]() | '+' should be on a new line. | 742 |
![]() | '+' should be on a new line. | 751 |
![]() | Parameter totalMapTasks should be final. | 763 |
![]() | '+' should be on a new line. | 779 |
![]() | '+' should be on a new line. | 780 |
![]() | '+' should be on a new line. | 781 |
![]() | '+' should be on a new line. | 782 |
![]() | Method 'offlineZooKeeperServers' is not designed for extension - needs to be abstract, final or empty. | 807 |
![]() | Parameter state should be final. | 807 |
![]() | '+' should be on a new line. | 824 |
![]() | '+' should be on a new line. | 828 |
![]() | '+' should be on a new line. | 833 |
![]() | Method 'runsZooKeeper' is not designed for extension - needs to be abstract, final or empty. | 847 |
![]() | First sentence should end with a period. | 59 |
![]() | First sentence should end with a period. | 61 |
![]() | First sentence should end with a period. | 63 |
![]() | First sentence should end with a period. | 66 |
![]() | First sentence should end with a period. | 68 |
![]() | First sentence should end with a period. | 70 |
![]() | First sentence should end with a period. | 72 |
![]() | First sentence should end with a period. | 74 |
![]() | First sentence should end with a period. | 76 |
![]() | First sentence should end with a period. | 81 |
![]() | First sentence should end with a period. | 86 |
![]() | First sentence should end with a period. | 88 |
![]() | First sentence should end with a period. | 90 |
![]() | First sentence should end with a period. | 92 |
![]() | First sentence should end with a period. | 94 |
![]() | First sentence should end with a period. | 96 |
![]() | First sentence should end with a period. | 98 |
![]() | First sentence should end with a period. | 100 |
![]() | First sentence should end with a period. | 102 |
![]() | First sentence should end with a period. | 104 |
![]() | First sentence should end with a period. | 106 |
![]() | First sentence should end with a period. | 108 |
![]() | First sentence should end with a period. | 110 |
![]() | First sentence should end with a period. | 112 |
![]() | First sentence should end with a period. | 118 |
![]() | First sentence should end with a period. | 120 |
![]() | First sentence should end with a period. | 122 |
![]() | Parameter context should be final. | 132 |
![]() | 'context' hides a field. | 132 |
![]() | Expected @throws tag for 'IOException'. | 133 |
![]() | '+' should be on a new line. | 146 |
![]() | '+' should be on a new line. | 156 |
![]() | '+' should be on a new line. | 159 |
![]() | First sentence should end with a period. | 173 |
![]() | First sentence should end with a period. | 182 |
![]() | Parameter conf should be final. | 190 |
![]() | '+' should be on a new line. | 193 |
![]() | First sentence should end with a period. | 204 |
![]() | First sentence should end with a period. | 206 |
![]() | 'is' hides a field. | 214 |
![]() | Method 'setup' is not designed for extension - needs to be abstract, final or empty. | 243 |
![]() | Expected @throws tag for 'IOException'. | 243 |
![]() | Expected @throws tag for 'InterruptedException'. | 243 |
![]() | Method 'createCandidateStamp' is not designed for extension - needs to be abstract, final or empty. | 252 |
![]() | '+' should be on a new line. | 255 |
![]() | '+' should be on a new line. | 258 |
![]() | '+' should be on a new line. | 265 |
![]() | '+' should be on a new line. | 270 |
![]() | '+' should be on a new line. | 271 |
![]() | '+' should be on a new line. | 272 |
![]() | '+' should be on a new line. | 273 |
![]() | '+' should be on a new line. | 278 |
![]() | '+' should be on a new line. | 282 |
![]() | '+' should be on a new line. | 287 |
![]() | '+' should be on a new line. | 299 |
![]() | '+' should be on a new line. | 303 |
![]() | Method 'computationDone' is not designed for extension - needs to be abstract, final or empty. | 312 |
![]() | Expected @throws tag for 'IOException'. | 327 |
![]() | Expected @throws tag for 'InterruptedException'. | 328 |
![]() | '+' should be on a new line. | 341 |
![]() | '+' should be on a new line. | 342 |
![]() | '+' should be on a new line. | 351 |
![]() | '+' should be on a new line. | 352 |
![]() | '+' should be on a new line. | 353 |
![]() | '+' should be on a new line. | 354 |
![]() | '+' should be on a new line. | 355 |
![]() | '+' should be on a new line. | 356 |
![]() | ':' should be on a new line. | 370 |
![]() | '+' should be on a new line. | 372 |
![]() | '+' should be on a new line. | 373 |
![]() | '+' should be on a new line. | 382 |
![]() | Expected @throws tag for 'IOException'. | 395 |
![]() | Expected @throws tag for 'IOException'. | 415 |
![]() | Expected @throws tag for 'InterruptedException'. | 416 |
![]() | '+' should be on a new line. | 429 |
![]() | '+' should be on a new line. | 430 |
![]() | '+' should be on a new line. | 431 |
![]() | '+' should be on a new line. | 440 |
![]() | '+' should be on a new line. | 450 |
![]() | '+' should be on a new line. | 451 |
![]() | '+' should be on a new line. | 456 |
![]() | '+' should be on a new line. | 457 |
![]() | '+' should be on a new line. | 458 |
![]() | First sentence should end with a period. | 475 |
![]() | Method 'getZooKeeperServerPortString' is not designed for extension - needs to be abstract, final or empty. | 479 |
![]() | Parameter serverList should be final. | 489 |
![]() | '+' should be on a new line. | 491 |
![]() | '+' should be on a new line. | 492 |
![]() | '+' should be on a new line. | 499 |
![]() | '+' should be on a new line. | 505 |
![]() | '+' should be on a new line. | 510 |
![]() | '+' should be on a new line. | 516 |
![]() | '+' should be on a new line. | 523 |
![]() | '+' should be on a new line. | 527 |
![]() | '+' should be on a new line. | 528 |
![]() | '+' should be on a new line. | 530 |
![]() | '+' should be on a new line. | 531 |
![]() | '+' should be on a new line. | 533 |
![]() | '+' should be on a new line. | 534 |
![]() | '+' should be on a new line. | 536 |
![]() | '+' should be on a new line. | 538 |
![]() | '+' should be on a new line. | 540 |
![]() | '+' should be on a new line. | 545 |
![]() | '+' should be on a new line. | 546 |
![]() | Method 'onlineZooKeeperServers' is not designed for extension - needs to be abstract, final or empty. | 572 |
![]() | Method length is 185 lines (max allowed is 150). | 572 |
![]() | '+' should be on a new line. | 578 |
![]() | '+' should be on a new line. | 583 |
![]() | '+' should be on a new line. | 613 |
![]() | '+' should be on a new line. | 614 |
![]() | '+' should be on a new line. | 628 |
![]() | '+' should be on a new line. | 629 |
![]() | '+' should be on a new line. | 638 |
![]() | '+' should be on a new line. | 650 |
![]() | '+' should be on a new line. | 651 |
![]() | '+' should be on a new line. | 652 |
![]() | '+' should be on a new line. | 653 |
![]() | '+' should be on a new line. | 654 |
![]() | '5000' is a magic number. | 660 |
![]() | '+' should be on a new line. | 662 |
![]() | '+' should be on a new line. | 667 |
![]() | '+' should be on a new line. | 670 |
![]() | '+' should be on a new line. | 673 |
![]() | '+' should be on a new line. | 681 |
![]() | '+' should be on a new line. | 687 |
![]() | '+' should be on a new line. | 691 |
![]() | '+' should be on a new line. | 695 |
![]() | '+' should be on a new line. | 700 |
![]() | '&&' should be on a new line. | 711 |
![]() | '+' should be on a new line. | 719 |
![]() | '+' should be on a new line. | 720 |
![]() | '+' should be on a new line. | 726 |
![]() | '+' should be on a new line. | 727 |
![]() | '+' should be on a new line. | 728 |
![]() | '+' should be on a new line. | 729 |
![]() | '+' should be on a new line. | 730 |
![]() | '+' should be on a new line. | 731 |
![]() | '+' should be on a new line. | 732 |
![]() | '+' should be on a new line. | 733 |
![]() | '+' should be on a new line. | 741 |
![]() | '+' should be on a new line. | 742 |
![]() | '+' should be on a new line. | 751 |
![]() | Parameter totalMapTasks should be final. | 763 |
![]() | '+' should be on a new line. | 779 |
![]() | '+' should be on a new line. | 780 |
![]() | '+' should be on a new line. | 781 |
![]() | '+' should be on a new line. | 782 |
![]() | Method 'offlineZooKeeperServers' is not designed for extension - needs to be abstract, final or empty. | 807 |
![]() | Parameter state should be final. | 807 |
![]() | '+' should be on a new line. | 824 |
![]() | '+' should be on a new line. | 828 |
![]() | '+' should be on a new line. | 833 |
![]() | Method 'runsZooKeeper' is not designed for extension - needs to be abstract, final or empty. | 847 |