# vim: noexpandtab tabstop=8 shiftwidth=8 syntax=make
#
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements. See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership. The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied. See the License for the
# specific language governing permissions and limitations
# under the License.
#
# WARNING: This may or may not work on your system. This Makefile is
# an example, rather than a ready-made universal solution.
PERL ?= yes
ENABLE_PERL_BINDINGS = $(PERL)
THREADING ?= yes
ifeq ($(THREADING),yes)
JAVA ?= yes
else
JAVA ?= no
endif
ENABLE_JAVA_BINDINGS = $(JAVA)
USE_APR_ICONV ?= no # set to yes to use APR iconv instead of GNU iconv
PARALLEL ?= 1
CLEANUP ?= 1
EXCLUSIVE_WC_LOCKS ?= 1
USE_HTTPV1 ?= no
USE_AUTHZ_SHORT_CIRCUIT ?= no
RAMDISK ?= /ramdisk
MAKE_JOBS ?= 4
# available backends: fsfs fsx bdb
SVN_CHECK_FS_BACKENDS ?= fsfs
PWD = $(shell pwd)
UNAME = $(shell uname)
RUBY = $(shell which ruby 2>/dev/null)
ifeq ($(RUBY),)
RUBY = $(shell which ruby27 2>/dev/null)
ifeq ($(RUBY),)
RUBY = $(shell which ruby26 2>/dev/null)
ifeq ($(RUBY),)
RUBY = $(shell which ruby25 2>/dev/null)
ifeq ($(RUBY),)
RUBY = $(shell which ruby24 2>/dev/null)
ifeq ($(RUBY),)
RUBY = $(shell which ruby23 2>/dev/null)
ifeq ($(RUBY),)
RUBY = $(shell which ruby22 2>/dev/null)
ifeq ($(RUBY),)
RUBY = $(shell which ruby21 2>/dev/null)
ifeq ($(RUBY),)
RUBY = $(shell which ruby20 2>/dev/null)
ifeq ($(RUBY),)
RUBY = $(shell which ruby19 2>/dev/null)
ifeq ($(RUBY),)
RUBY = $(shell which ruby18)
endif # 1.8
endif # 1.9
endif # 2.0
endif # 2.1
endif # 2.2
endif # 2.3
endif # 2.4
endif # 2.5
endif # 2.6
endif # 2.7
ifeq ($(UNAME),OpenBSD)
# Pick the correct base compiler (ie. clang rather than ancient gcc 4.2.1)
CC = cc
CXX = c++
endif
TAG ?= none
ifeq ($(TAG),none)
BRANCH ?= trunk
else
BRANCH = $(TAG)
endif
WC ?= $(BRANCH)
BRANCH_MAJOR := $(shell echo $(BRANCH) | sed -E 's/([0-9]+)\.([0-9]+)\..*/\1.\2/')
ifeq ($(BRANCH_MAJOR), $(filter 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13, $(BRANCH_MAJOR)))
PYTHON = python2
else
PYTHON = python3
endif
SVN_REL_WC = svn-$(WC)
SVN_WC = $(PWD)/$(SVN_REL_WC)
PREFIX = $(PWD)/prefix
SVN_PREFIX = $(PREFIX)/svn-$(WC)
DISTDIR = $(PWD)/distfiles
SRCDIR = $(PWD)/src
OBJDIR = $(PWD)/objdir
BDB_MAJOR_VER = 4.7
BDB_VER = $(BDB_MAJOR_VER).25
APR_VER = 1.7.0
APR_ICONV_VER = 1.2.1
GNU_ICONV_VER = 1.15
APR_UTIL_VER = 1.6.1
PCRE_VER = 8.41
HTTPD_VER = 2.4.37
NEON_VER = 0.32.5
SERF_VER = 1.3.10
CYRUS_SASL_VER = 2.1.28
SQLITE_VER = 3390400
LIBMAGIC_VER = 5.30
RUBY_VER = 2.7.4
BZ2_VER = 1.0.6
PYTHON_VER = 3.10.8
PYTHON2_VER = 2.7.13
PY3C_VER = 1.1
JUNIT_VER = 4.10
GETTEXT_VER = 0.19.8.1
LZ4_VER = 1.7.5
SWIG_OLD_VER = 3.0.12
BDB_DIST = db-$(BDB_VER).tar.gz
APR_ICONV_DIST = apr-iconv-$(APR_ICONV_VER).tar.gz
GNU_ICONV_DIST = libiconv-$(GNU_ICONV_VER).tar.gz
NEON_DIST = neon-$(NEON_VER).tar.gz
SQLITE_DIST = sqlite-autoconf-$(SQLITE_VER).tar.gz
CYRUS_SASL_DIST = cyrus-sasl-$(CYRUS_SASL_VER).tar.gz
PCRE_DIST = pcre-$(PCRE_VER).tar.gz
HTTPD_DIST = httpd-$(HTTPD_VER).tar.gz
LIBMAGIC_DIST = file-$(LIBMAGIC_VER).tar.gz
RUBY_DIST = ruby-$(RUBY_VER).tar.gz
BZ2_DIST = bzip2-$(BZ2_VER).tar.gz
PYTHON_DIST = Python-$(PYTHON_VER).tgz
PYTHON2_DIST = Python-$(PYTHON2_VER).tgz
PY3C_DIST = py3c-$(PY3C_VER).tar.gz
JUNIT_DIST = junit-${JUNIT_VER}.jar
GETTEXT_DIST = gettext-$(GETTEXT_VER).tar.gz
LZ4_DIST = lz4-$(LZ4_VER).tar.gz
SWIG_OLD_DIST = swig-$(SWIG_OLD_VER).tar.gz
SHA256_${BDB_DIST} = f14fd96dd38915a1d63dcb94a63fbb8092334ceba6b5060760427096f631263e
SHA256_${APR_ICONV_DIST} = 19381959d50c4a5f3b9c84d594a5f9ffb3809786919b3058281f4c87e1f4b245
SHA256_${GNU_ICONV_DIST} = ccf536620a45458d26ba83887a983b96827001e92a13847b45e4925cc8913178
SHA256_${PCRE_DIST} = 244838e1f1d14f7e2fa7681b857b3a8566b74215f28133f14a8f5e59241b682c
SHA256_${HTTPD_DIST} = aa97a834a32d51974be8d8a013b561e28d327387cb1da2c3c2762acd0146aabd
SHA256_${NEON_DIST} = 4872e12f802572dedd4b02f870065814b2d5141f7dbdaf708eedab826b51a58a
SHA256_${CYRUS_SASL_DIST} = 7ccfc6abd01ed67c1a0924b353e526f1b766b21f42d4562ee635a8ebfc5bb38c
SHA256_${SQLITE_DIST} = f31d445b48e67e284cf206717cc170ab63cbe4fd7f79a82793b772285e78fdbb
SHA256_${LIBMAGIC_DIST} = 694c2432e5240187524c9e7cf1ec6acc77b47a0e19554d34c14773e43dbbf214
SHA256_${RUBY_DIST} = 3043099089608859fc8cce7f9fdccaa1f53a462457e3838ec3b25a7d609fbc5b
SHA256_${BZ2_DIST} = a2848f34fcd5d6cf47def00461fcb528a0484d8edef8208d6d2e2909dc61d9cd
SHA256_${PYTHON_DIST} = f400c3fb394b8bef1292f6dc1292c5fadc3533039a5bc0c3e885f3e16738029a
SHA256_${PYTHON2_DIST} = a4f05a0720ce0fd92626f0278b6b433eee9a6173ddf2bced7957dfb599a5ece1
SHA256_${PY3C_DIST} = c7ffc22bc92dded0ca859db53ef3a0b466f89a9f8aad29359c9fe4ff18ebdd20
SHA256_${JUNIT_DIST} = 36a747ca1e0b86f6ea88055b8723bb87030d627766da6288bf077afdeeb0f75a
SHA256_${GETTEXT_DIST} = ff942af0e438ced4a8b0ea4b0b6e0d6d657157c5e2364de57baa279c1c125c43
SHA256_${LZ4_DIST} = 0190cacd63022ccb86f44fa5041dc6c3804407ad61550ca21c382827319e7e7e
SHA256_${SWIG_OLD_DIST} = 7cf9f447ae7ed1c51722efc45e7f14418d15d7a1e143ac9f09a668999f4fc94d
define do_check_sha256
if [ -x /bin/sha256 ]; then \
(cd $(DISTDIR) && \
echo "SHA256 (${1}) = ${SHA256_${1}}" | /bin/sha256 -C /dev/stdin "${1}"); \
elif [ -x /usr/bin/sha256sum ]; then \
(cd $(DISTDIR) && \
echo "${SHA256_${1}} ${1}" | /usr/bin/sha256sum --quiet --check); \
elif [ -x /sbin/sha256sum ]; then \
(cd $(DISTDIR) && \
echo "${SHA256_${1}} ${1}" | /sbin/sha256sum --quiet --check /dev/stdin); \
elif [ -x /usr/bin/shasum ]; then \
echo "${SHA256_${1}} ${1}"; \
(cd $(DISTDIR) && \
echo "${SHA256_${1}} ${1}" | /usr/bin/shasum -a 256 -c /dev/stdin ); \
else \
echo "Error: No tool found to verify checksum"; \
false; \
fi
endef
DISTFILES = $(DISTDIR)/$(NEON_DIST) \
$(DISTDIR)/$(SERF_DIST) \
$(DISTDIR)/$(SQLITE_DIST) \
$(DISTDIR)/$(PCRE_DIST) \
$(DISTDIR)/$(HTTPD_DIST) \
$(DISTDIR)/$(APR_ICONV_DIST) \
$(DISTDIR)/$(GNU_ICONV_DIST) \
$(DISTDIR)/$(CYRUS_SASL_DIST) \
$(DISTDIR)/$(LIBMAGIC_DIST) \
$(DISTDIR)/$(RUBY_DIST) \
$(DISTDIR)/$(BZ2_DIST) \
$(DISTDIR)/$(PYTHON_DIST) \
$(DISTDIR)/$(PYTHON2_DIST) \
$(DISTDIR)/$(PY3C_DIST) \
$(DISTDIR)/$(JUNIT_DIST) \
$(DISTDIR)/$(GETTEXT_DIST) \
$(DISTDIR)/$(SWIG_OLD_DIST)
FETCH_CMD = wget -c
SUBVERSION_REPOS_URL = https://svn.apache.org/repos/asf/subversion
BDB_URL = http://download.oracle.com/berkeley-db/$(BDB_DIST)
APR_URL = https://svn.apache.org/repos/asf/apr/apr
APR_ICONV_URL = https://archive.apache.org/dist/apr/$(APR_ICONV_DIST)
GNU_ICONV_URL = https://ftp.gnu.org/pub/gnu/libiconv/$(GNU_ICONV_DIST)
APR_UTIL_URL = https://svn.apache.org/repos/asf/apr/apr-util
PCRE_URL = https://downloads.sourceforge.net/project/pcre/pcre/$(PCRE_VER)/$(PCRE_DIST)
HTTPD_URL = https://archive.apache.org/dist/httpd/$(HTTPD_DIST)
NEON_URL = https://notroj.github.io/neon/$(NEON_DIST)
SERF_URL = https://svn.apache.org/repos/asf/serf/tags/$(SERF_VER)
SQLITE_URL = https://www.sqlite.org/2022/$(SQLITE_DIST)
CYRUS_SASL_URL = https://github.com/cyrusimap/cyrus-sasl/releases/download/cyrus-sasl-${CYRUS_SASL_VER}/$(CYRUS_SASL_DIST)
LIBMAGIC_URL = ftp://ftp.astron.com/pub/file/$(LIBMAGIC_DIST)
RUBY_URL = https://cache.ruby-lang.org/pub/ruby/2.7/$(RUBY_DIST)
BZ2_URL = https://stsp.name/distfiles/$(BZ2_DIST)
PYTHON_URL = https://python.org/ftp/python/$(PYTHON_VER)/$(PYTHON_DIST)
PYTHON2_URL = https://python.org/ftp/python/$(PYTHON2_VER)/$(PYTHON2_DIST)
PY3C_URL = https://stsp.name/distfiles/py3c-${PY3C_VER}.tar.gz
JUNIT_URL = https://stsp.name/distfiles/$(JUNIT_DIST)
GETTEXT_URL = https://ftp.gnu.org/pub/gnu/gettext/$(GETTEXT_DIST)
LZ4_URL = https://github.com/lz4/lz4/archive/v$(LZ4_VER).tar.gz
SWIG_OLD_URL = https://downloads.sourceforge.net/sourceforge/swig/swig-$(SWIG_OLD_VER).tar.gz
BDB_SRCDIR = $(SRCDIR)/db-$(BDB_VER)
APR_SRCDIR = $(SRCDIR)/apr-$(APR_VER)
APR_ICONV_SRCDIR = $(SRCDIR)/apr-iconv-$(APR_ICONV_VER)
GNU_ICONV_SRCDIR = $(SRCDIR)/libiconv-$(GNU_ICONV_VER)
APR_UTIL_SRCDIR = $(SRCDIR)/apr-util-$(APR_UTIL_VER)
PCRE_SRCDIR = $(SRCDIR)/pcre-$(PCRE_VER)
HTTPD_SRCDIR = $(SRCDIR)/httpd-$(HTTPD_VER)
NEON_SRCDIR = $(SRCDIR)/neon-$(NEON_VER)
SERF_SRCDIR = $(SRCDIR)/serf-$(SERF_VER)
SQLITE_SRCDIR = $(SRCDIR)/sqlite-autoconf-$(SQLITE_VER)
CYRUS_SASL_SRCDIR = $(SRCDIR)/cyrus-sasl-$(CYRUS_SASL_VER)
LIBMAGIC_SRCDIR = $(SRCDIR)/file-$(LIBMAGIC_VER)
RUBY_SRCDIR = $(SRCDIR)/ruby-$(RUBY_VER)
BZ2_SRCDIR = $(SRCDIR)/bzip2-$(BZ2_VER)
PYTHON_SRCDIR = $(SRCDIR)/Python-$(PYTHON_VER)
PYTHON2_SRCDIR = $(SRCDIR)/Python-$(PYTHON2_VER)
PY3C_SRCDIR = $(SRCDIR)/py3c-$(PY3C_VER)
GETTEXT_SRCDIR = $(SRCDIR)/gettext-$(GETTEXT_VER)
LZ4_SRCDIR = ${SRCDIR}/lz4-$(LZ4_VER)
SWIG_OLD_SRCDIR = ${SRCDIR}/swig-$(SWIG_OLD_VER)
SVN_SRCDIR = $(SVN_WC)
BDB_OBJDIR = $(OBJDIR)/db-$(BDB_VER)
APR_OBJDIR = $(OBJDIR)/apr-$(APR_VER)
APR_ICONV_OBJDIR = $(OBJDIR)/apr-iconv-$(APR_ICONV_VER)
GNU_ICONV_OBJDIR = $(OBJDIR)/libiconv-$(GNU_ICONV_VER)
APR_UTIL_OBJDIR = $(OBJDIR)/apr-util-$(APR_UTIL_VER)
PCRE_OBJDIR = $(OBJDIR)/pcre-$(PCRE_VER)
HTTPD_OBJDIR = $(OBJDIR)/httpd-$(HTTPD_VER)
NEON_OBJDIR = $(OBJDIR)/neon-$(NEON_VER)
SERF_OBJDIR = $(OBJDIR)/serf-$(SERF_VER)
SQLITE_OBJDIR = $(OBJDIR)/sqlite-$(SQLITE_VER)
CYRUS_SASL_OBJDIR = $(OBJDIR)/cyrus-sasl-$(CYRUS_SASL_VER)
LIBMAGIC_OBJDIR = $(OBJDIR)/file-$(LIBMAGIC_VER)
RUBY_OBJDIR = $(OBJDIR)/ruby-$(RUBY_VER)
BZ2_OBJDIR = $(OBJDIR)/bzip2-$(BZ2_VER)
PYTHON_OBJDIR = $(OBJDIR)/python-$(PYTHON_VER)
PYTHON2_OBJDIR = $(OBJDIR)/python-$(PYTHON2_VER)
PY3C_OBJDIR = $(OBJDIR)/py3c-$(PY3C_VER)
GETTEXT_OBJDIR = $(OBJDIR)/gettext-$(GETTEXT_VER)
LZ4_OBJDIR = ${OBJDIR}/lz4-$(LZ4_VER)
SWIG_OLD_OBJDIR = ${OBJDIR}/swig-$(SWIG_OLD_VER)
SVN_OBJDIR = $(OBJDIR)/$(SVN_REL_WC)
# Tweak this for out-of-tree builds. Note that running individual
# tests in the test suite won't work conveniently with out-of-tree
# builds!
svn_builddir ?=$(SVN_WC)
ifdef PROFILE
PROFILE_CFLAGS=-pg
endif
# We need this to make sure some targets below pick up the right libraries
LD_LIBRARY_PATH=$(PREFIX)/apr/lib:$(PREFIX)/gettext/lib:$(PREFIX)/iconv/lib:$(PREFIX)/bdb/lib:$(PREFIX)/neon/lib:$(PREFIX)/serf/lib:$(PREFIX)/sqlite/lib:$(PREFIX)/cyrus-sasl/lib:$(PREFIX)/iconv/lib:$(PREFIX)/libmagic/lib:$(PREFIX)/ruby/lib:$(PREFIX)/svn-$(WC)/lib
# We need this to make sure some targets below pick up the right pkg-config files
PKG_CONFIG_PATH=$(PREFIX)/apr/lib/pkgconfig:$(PREFIX)/neon/lib/pkgconfig:$(PREFIX)/serf/lib/pkgconfig:$(PREFIX)/sqlite/lib/pkgconfig:$(PREFIX)/ruby/lib/pkgconfig:$(PREFIX)/lz4/lib/pkgconfig
#######################################################################
# Main targets.
#######################################################################
.PHONY: all reset clean nuke fetch
all: dirs-create bdb-install apr-install iconv-install apr-util-install \
pcre-install httpd-install neon-install serf-install \
sqlite-install cyrus-sasl-install libmagic-install \
ruby-install bz2-install python-install python2-install py3c-retrieve \
gettext-install lz4-install swig-old-install svn-install \
svn-bindings-install
# Use these to start a build from the beginning.
reset: dirs-reset bdb-reset apr-reset iconv-reset apr-util-reset \
pcre-reset httpd-reset neon-reset serf-reset \
sqlite-reset cyrus-sasl-reset libmagic-reset ruby-reset python-reset \
python2-reset bz2-reset gettext-reset lz4-reset swig-old-reset svn-reset
# Use to save disk space.
clean: bdb-clean apr-clean iconv-clean apr-util-clean pcre-clean httpd-clean \
neon-clean serf-clean sqlite-clean cyrus-sasl-clean \
libmagic-clean ruby-clean bz2-clean python-clean python2-clean \
gettext-clean lz4-clean swig-old-clean svn-clean
# Nukes everything (including installed binaries!)
# Use this to start ALL OVER AGAIN! Use with caution!
nuke:
@echo
@echo "I will now remove the following directories PERMANENTLY:"
@echo
@echo " $(SRCDIR)"
@echo " $(OBJDIR)"
@echo " $(PREFIX)"
@echo
@echo -n 'Do you want me to continue? ([no]/yes): '
@read ANSWER ; \
case $$ANSWER in \
yes) echo "You said $$ANSWER. I will continue."; \
echo rm -rf $(SRCDIR) $(OBJDIR) $(PREFIX); \
rm -rf $(SRCDIR) $(OBJDIR) $(PREFIX); \
$(MAKE) reset; \
;; \
"") echo "You said no."; \
;; \
*) echo "You said $$ANSWER."; \
;; \
esac
fetch: $(DISTFILES)
#######################################################################
# directories
#######################################################################
dirs-create: $(PWD)/.dirs-created
dirs-reset:
rm -f $(PWD)/.dirs-created
$(PWD)/.dirs-created:
$(foreach d, $(PREFIX) $(DISTDIR) $(SRCDIR) $(OBJDIR), \
[ -d $(d) ] || mkdir -p $(d);)
touch $@
#######################################################################
# bdb
#######################################################################
bdb-retrieve: $(BDB_OBJDIR)/.retrieved
bdb-configure: $(BDB_OBJDIR)/.configured
bdb-compile: $(BDB_OBJDIR)/.compiled
bdb-install: $(BDB_OBJDIR)/.installed
bdb-reset:
$(foreach f, .retrieved .configured .compiled .installed, \
rm -f $(BDB_OBJDIR)/$(f);)
bdb-clean:
-(cd $(BDB_SRCDIR)/build_unix/ && env MAKEFLAGS= make clean)
# fetch distfile for bdb
$(DISTDIR)/$(BDB_DIST):
cd $(DISTDIR) && $(FETCH_CMD) $(BDB_URL)
# retrieve bdb
$(BDB_OBJDIR)/.retrieved: $(DISTDIR)/$(BDB_DIST)
$(call do_check_sha256,$(BDB_DIST))
[ -d $(BDB_OBJDIR) ] || mkdir -p $(BDB_OBJDIR)
tar -C $(SRCDIR) -zxf $(DISTDIR)/$(BDB_DIST)
touch $@
# configure bdb
$(BDB_OBJDIR)/.configured: $(BDB_OBJDIR)/.retrieved
cd $(BDB_SRCDIR)/build_unix \
&& env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`" \
CC=$(CC) CXX=$(CXX) \
../dist/configure \
--prefix=$(PREFIX)/bdb \
--enable-debug
touch $@
# compile bdb
$(BDB_OBJDIR)/.compiled: $(BDB_OBJDIR)/.configured
(cd $(BDB_SRCDIR)/build_unix && env MAKEFLAGS= make -j${MAKE_JOBS})
touch $@
# install bdb
$(BDB_OBJDIR)/.installed: $(BDB_OBJDIR)/.compiled
(cd $(BDB_SRCDIR)/build_unix && env MAKEFLAGS= make install)
touch $@
#######################################################################
# apr
#######################################################################
apr-retrieve: $(APR_OBJDIR)/.retrieved
apr-configure: $(APR_OBJDIR)/.configured
apr-compile: $(APR_OBJDIR)/.compiled
apr-install: $(APR_OBJDIR)/.installed
apr-reset:
$(foreach f, .retrieved .configured .compiled .installed, \
rm -f $(APR_OBJDIR)/$(f);)
apr-clean:
-(cd $(APR_OBJDIR) && env MAKEFLAGS= make clean)
# retrieve apr if not present yet
$(APR_OBJDIR)/.retrieved:
[ -d $(APR_OBJDIR) ] || mkdir -p $(APR_OBJDIR)
if [ ! -d $(APR_SRCDIR) ]; then \
svn export $(APR_URL)/tags/$(APR_VER)/ $(APR_SRCDIR); \
fi
touch $@
ifeq ($(THREADING),yes)
THREADS_FLAG=--enable-threads
else
THREADS_FLAG=--disable-threads
endif
ifdef POOL_DEBUG
POOL_DEBUG_FLAG=--enable-pool-debug=all
else
# Map apr_palloc()/apr_pool_{clear,destroy}() to malloc()/free().
# This also puts poison bytes into freed memory to help detect use after free.
POOL_DEBUG_FLAG=--enable-pool-debug=yes
endif
# configure apr
$(APR_OBJDIR)/.configured: $(APR_OBJDIR)/.retrieved $(BDB_OBJDIR)/.installed
cd $(APR_SRCDIR) && ./buildconf
cd $(APR_OBJDIR) \
&& env CFLAGS="-O0 -g $(PROFILE_CFLAGS)" GREP="`which grep`" \
PKG_CONFIG_PATH=$(PKG_CONFIG_PATH) \
CC=$(CC) CXX=$(CXX) \
$(APR_SRCDIR)/configure \
--prefix=$(PREFIX)/apr \
--enable-maintainer-mode \
$(THREADS_FLAG) \
$(POOL_DEBUG_FLAG)
touch $@
# compile apr
$(APR_OBJDIR)/.compiled: $(APR_OBJDIR)/.configured
(cd $(APR_OBJDIR) && env MAKEFLAGS= make -j${MAKE_JOBS})
touch $@
# install apr
$(APR_OBJDIR)/.installed: $(APR_OBJDIR)/.compiled
(cd $(APR_OBJDIR) && env MAKEFLAGS= make install)
touch $@
#######################################################################
# apr-iconv
#######################################################################
apr-iconv-retrieve: $(APR_ICONV_OBJDIR)/.retrieved
apr-iconv-configure: $(APR_ICONV_OBJDIR)/.configured
apr-iconv-compile: $(APR_ICONV_OBJDIR)/.compiled
apr-iconv-install: $(APR_ICONV_OBJDIR)/.installed
apr-iconv-reset:
$(foreach f, .retrieved .configured .compiled .installed, \
rm -f $(APR_ICONV_OBJDIR)/$(f);)
apr-iconv-clean:
-(cd $(APR_ICONV_OBJDIR) && env MAKEFLAGS= make clean)
# fetch distfile for apr-iconv
$(DISTDIR)/$(APR_ICONV_DIST):
cd $(DISTDIR) && $(FETCH_CMD) $(APR_ICONV_URL)
# retrieve apr-iconv
$(APR_ICONV_OBJDIR)/.retrieved: $(DISTDIR)/$(APR_ICONV_DIST)
$(call do_check_sha256,$(APR_ICONV_DIST))
[ -d $(APR_ICONV_OBJDIR) ] || mkdir -p $(APR_ICONV_OBJDIR)
tar -C $(SRCDIR) -zxf $(DISTDIR)/$(APR_ICONV_DIST)
touch $@
# configure apr-iconv
$(APR_ICONV_OBJDIR)/.configured: $(APR_ICONV_OBJDIR)/.retrieved \
$(APR_OBJDIR)/.installed
cd $(APR_ICONV_OBJDIR) \
&& env CFLAGS="-g $(PROFILE_CFLAGS) -DAPR_POOL_DEBUG" \
CC=$(CC) CXX=$(CXX) \
GREP="`which grep`" \
PKG_CONFIG_PATH=$(PKG_CONFIG_PATH) \
$(APR_ICONV_SRCDIR)/configure \
--prefix=$(PREFIX)/apr \
--with-apr=$(PREFIX)/apr
touch $@
# compile apr-iconv
$(APR_ICONV_OBJDIR)/.compiled: $(APR_ICONV_OBJDIR)/.configured
(cd $(APR_ICONV_OBJDIR) \
&& env MAKEFLAGS= make CPPFLAGS="-D_OSD_POSIX" CFLAGS="-g -O0 $(PROFILE_CFLAGS)" -j${MAKE_JOBS})
touch $@
# install apr-iconv
$(APR_ICONV_OBJDIR)/.installed: $(APR_ICONV_OBJDIR)/.compiled
(cd $(APR_ICONV_OBJDIR) && env MAKEFLAGS= make install)
touch $@
#######################################################################
# gnu-iconv
#######################################################################
gnu-iconv-retrieve: $(GNU_ICONV_OBJDIR)/.retrieved
gnu-iconv-configure: $(GNU_ICONV_OBJDIR)/.configured
gnu-iconv-compile: $(GNU_ICONV_OBJDIR)/.compiled
gnu-iconv-install: $(GNU_ICONV_OBJDIR)/.installed
gnu-iconv-reset:
$(foreach f, .retrieved .configured .compiled .installed, \
rm -f $(GNU_ICONV_OBJDIR)/$(f);)
gnu-iconv-clean:
-(cd $(GNU_ICONV_OBJDIR) && env MAKEFLAGS= make clean)
rm -f $(GNU_ICONV_OBJDIR)/lib_encodings.def.diff
rm -f $(GNU_ICONV_OBJDIR)/lib_aliases.gperf.diff
# fetch distfile for gnu-iconv
$(DISTDIR)/$(GNU_ICONV_DIST):
cd $(DISTDIR) && $(FETCH_CMD) $(GNU_ICONV_URL)
$(GNU_ICONV_OBJDIR)/lib_encodings.def.diff:
mkdir -p $(dir $@)
echo > $@.tmp '--- lib/encodings.def.orig Wed Oct 24 23:41:41 2007'
echo >>$@.tmp '+++ lib/encodings.def Wed Oct 24 23:43:47 2007'
echo >>$@.tmp '@@ -37,6 +37,7 @@'
echo >>$@.tmp ' '
echo >>$@.tmp ' '
echo >>$@.tmp ' DEFENCODING(( "US-ASCII", /* IANA */'
echo >>$@.tmp '+ "646",'
echo >>$@.tmp ' "ASCII", /* IANA, JDK 1.1 */'
echo >>$@.tmp ' "ISO646-US", /* IANA */'
echo >>$@.tmp ' "ISO_646.IRV:1991", /* IANA */'
mv -f $@.tmp $@
$(GNU_ICONV_OBJDIR)/lib_aliases.gperf.diff:
mkdir -p $(dir $@)
echo > $@.tmp '--- lib/aliases.gperf.orig Wed Oct 24 23:41:32 2007'
echo >>$@.tmp '+++ lib/aliases.gperf Wed Oct 24 23:47:38 2007'
echo >>$@.tmp '@@ -10,6 +10,7 @@ struct alias { int name; unsigned int encoding_index; '
echo >>$@.tmp ' %pic'
echo >>$@.tmp ' %%'
echo >>$@.tmp ' US-ASCII, ei_ascii'
echo >>$@.tmp '+646, ei_ascii'
echo >>$@.tmp ' ASCII, ei_ascii'
echo >>$@.tmp ' ISO646-US, ei_ascii'
echo >>$@.tmp ' ISO_646.IRV:1991, ei_ascii'
mv -f $@.tmp $@
# retrieve gnu-iconv
# Add 646 as an alias for ASCII to fix prop_test 22 on OpenBSD
$(GNU_ICONV_OBJDIR)/.retrieved: $(DISTDIR)/$(GNU_ICONV_DIST) \
$(GNU_ICONV_OBJDIR)/lib_encodings.def.diff \
$(GNU_ICONV_OBJDIR)/lib_aliases.gperf.diff
$(call do_check_sha256,$(GNU_ICONV_DIST))
tar -C $(SRCDIR) -zxf $(DISTDIR)/$(GNU_ICONV_DIST)
cd $(SRCDIR)/libiconv-$(GNU_ICONV_VER) && \
patch -p0 < $(GNU_ICONV_OBJDIR)/lib_encodings.def.diff && \
patch -p0 < $(GNU_ICONV_OBJDIR)/lib_aliases.gperf.diff
cd $(SRCDIR)/libiconv-${GNU_ICONV_VER} && \
sed -i 's/gcc/${CC}/' Makefile.devel
touch $@
# configure gnu-iconv
$(GNU_ICONV_OBJDIR)/.configured: $(GNU_ICONV_OBJDIR)/.retrieved
cd $(SRCDIR)/libiconv-${GNU_ICONV_VER} && \
${MAKE} -f Makefile.devel lib/aliases.h
cd $(GNU_ICONV_OBJDIR) \
&& env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`"\
CC=$(CC) CXX=$(CXX) \
PKG_CONFIG_PATH=$(PKG_CONFIG_PATH) \
$(GNU_ICONV_SRCDIR)/configure \
--prefix=$(PREFIX)/iconv \
--enable-extra-encodings
touch $@
# compile gnu-iconv
$(GNU_ICONV_OBJDIR)/.compiled: $(GNU_ICONV_OBJDIR)/.configured
(cd $(GNU_ICONV_OBJDIR) && env MAKEFLAGS= make -j${MAKE_JOBS})
touch $@
# install gnu-iconv
$(GNU_ICONV_OBJDIR)/.installed: $(GNU_ICONV_OBJDIR)/.compiled
(cd $(GNU_ICONV_OBJDIR) && env MAKEFLAGS= make install)
touch $@
#######################################################################
# iconv
#######################################################################
.PHONY: iconv-install iconv-reset iconv-clean
ifeq ($(USE_APR_ICONV),yes)
iconv-install: apr-iconv-install
iconv-reset: apr-iconv-reset
iconv-clean: apr-iconv-clean
else
iconv-install: gnu-iconv-install
iconv-reset: gnu-iconv-reset
iconv-clean: gnu-iconv-clean
endif
#######################################################################
# apr-util
#######################################################################
apr-util-retrieve: $(APR_UTIL_OBJDIR)/.retrieved
apr-util-configure: $(APR_UTIL_OBJDIR)/.configured
apr-util-compile: $(APR_UTIL_OBJDIR)/.compiled
apr-util-install: $(APR_UTIL_OBJDIR)/.installed
apr-util-reset:
$(foreach f, .retrieved .configured .compiled .installed, \
rm -f $(APR_UTIL_OBJDIR)/$(f);)
apr-util-clean:
-(cd $(APR_UTIL_OBJDIR) && env MAKEFLAGS= make clean)
# retrieve apr-util if not present yet
$(APR_UTIL_OBJDIR)/.retrieved:
[ -d $(APR_UTIL_OBJDIR) ] || mkdir -p $(APR_UTIL_OBJDIR)
if [ ! -d $(APR_UTIL_SRCDIR) ]; then \
svn export $(APR_UTIL_URL)/tags/$(APR_UTIL_VER)/ \
$(APR_UTIL_SRCDIR); \
fi
touch $@
ifeq ($(USE_APR_ICONV),yes)
ICONV_FLAG=--with-iconv=$(PREFIX)/apr
ICONV_OBJDIR=$(APR_ICONV_OBJDIR)
else
ICONV_FLAG=--with-iconv=$(PREFIX)/iconv
ICONV_OBJDIR=$(GNU_ICONV_OBJDIR)
endif
# configure apr-util
$(APR_UTIL_OBJDIR)/.configured: $(APR_UTIL_OBJDIR)/.retrieved \
$(APR_OBJDIR)/.installed $(ICONV_OBJDIR)/.installed
cd $(APR_UTIL_SRCDIR) && ./buildconf --with-apr=$(APR_SRCDIR)
cd $(APR_UTIL_OBJDIR) \
&& env LD_LIBRARY_PATH=$(PREFIX)/bdb/lib \
PKG_CONFIG_PATH=$(PKG_CONFIG_PATH) \
CFLAGS="-O0 -g $(PROFILE_CFLAGS) -DAPR_POOL_DEBUG" \
CC=$(CC) CXX=$(CXX) \
GREP="`which grep`" \
$(APR_UTIL_SRCDIR)/configure \
--prefix=$(PREFIX)/apr \
--enable-maintainer-mode \
--with-apr=$(PREFIX)/apr \
--with-berkeley-db=$(PREFIX)/bdb \
$(ICONV_FLAG)
touch $@
# compile apr-util
$(APR_UTIL_OBJDIR)/.compiled: $(APR_UTIL_OBJDIR)/.configured
(cd $(APR_UTIL_OBJDIR) && env MAKEFLAGS= make -j${MAKE_JOBS})
touch $@
# install apr-util
$(APR_UTIL_OBJDIR)/.installed: $(APR_UTIL_OBJDIR)/.compiled
(cd $(APR_UTIL_OBJDIR) && env MAKEFLAGS= make install)
touch $@
#######################################################################
# pcre
#######################################################################
pcre-retrieve: $(PCRE_OBJDIR)/.retrieved
pcre-configure: $(PCRE_OBJDIR)/.configured
pcre-compile: $(PCRE_OBJDIR)/.compiled
pcre-install: $(PCRE_OBJDIR)/.installed
pcre-reset:
$(foreach f, .retrieved .configured .compiled .installed, \
rm -f $(PCRE_OBJDIR)/$(f);)
pcre-clean:
-(cd $(PCRE_OBJDIR) && env MAKEFLAGS= make clean)
# fetch distfile for pcre
$(DISTDIR)/$(PCRE_DIST):
cd $(DISTDIR) && $(FETCH_CMD) $(PCRE_URL)
# retrieve pcre
$(PCRE_OBJDIR)/.retrieved: $(DISTDIR)/$(PCRE_DIST)
$(call do_check_sha256,$(PCRE_DIST))
[ -d $(PCRE_OBJDIR) ] || mkdir -p $(PCRE_OBJDIR)
tar -C $(SRCDIR) -zxf $(DISTDIR)/$(PCRE_DIST)
touch $@
# configure pcre
$(PCRE_OBJDIR)/.configured: $(PCRE_OBJDIR)/.retrieved
cd $(PCRE_OBJDIR) \
&& env CFLAGS="-g $(PROFILE_CFLAGS)" \
CC=$(CC) CXX=$(CXX) \
GREP="`which grep`" \
PKG_CONFIG_PATH=$(PKG_CONFIG_PATH) \
$(PCRE_SRCDIR)/configure \
--prefix=$(PREFIX)/pcre
touch $@
# compile pcre
$(PCRE_OBJDIR)/.compiled: $(PCRE_OBJDIR)/.configured
(cd $(PCRE_OBJDIR) && env MAKEFLAGS= make -j${MAKE_JOBS})
touch $@
# install pcre
$(PCRE_OBJDIR)/.installed: $(PCRE_OBJDIR)/.compiled
(cd $(PCRE_OBJDIR) && env MAKEFLAGS= make install)
touch $@
#######################################################################
# httpd
#######################################################################
HTTPD_CONF= $(PREFIX)/httpd/conf/httpd-$(SVN_REL_WC).conf
httpd-retrieve: $(HTTPD_OBJDIR)/.retrieved
httpd-configure: $(HTTPD_OBJDIR)/.configured
httpd-compile: $(HTTPD_OBJDIR)/.compiled
httpd-install: $(HTTPD_OBJDIR)/.installed $(HTTPD_CONF)
httpd-reset:
$(foreach f, .retrieved .configured .compiled .installed, \
rm -f $(HTTPD_OBJDIR)/$(f);)
httpd-clean:
-(cd $(HTTPD_OBJDIR) && env MAKEFLAGS= make clean)
rm -f $(HTTPD_OBJDIR)/mod-proxy-no-threads-2.4.diff
rm -f $(HTTPD_OBJDIR)/ssl-init-proxy-certs.diff
# fetch distfile for httpd
$(DISTDIR)/$(HTTPD_DIST):
cd $(DISTDIR) && $(FETCH_CMD) $(HTTPD_URL)
$(HTTPD_OBJDIR)/ssl-init-proxy-certs.diff:
mkdir -p $(dir $@)
echo > $@.tmp '--- modules/ssl/ssl_engine_init.c.orig Sun Dec 16 13:34:14 2018'
echo >> $@.tmp '+++ modules/ssl/ssl_engine_init.c Sun Dec 16 13:34:59 2018'
echo >> $@.tmp '@@ -1492,7 +1492,7 @@'
echo >> $@.tmp ' X509_STORE_CTX *sctx;'
echo >> $@.tmp ' X509_STORE *store = SSL_CTX_get_cert_store(mctx->ssl_ctx);'
echo >> $@.tmp ' '
echo >> $@.tmp '-#if OPENSSL_VERSION_NUMBER >= 0x1010100fL'
echo >> $@.tmp '+#if OPENSSL_VERSION_NUMBER >= 0x1010100fL && !defined(LIBRESSL_VERSION_NUMBER)'
echo >> $@.tmp ' /* For OpenSSL >=1.1.1, turn on client cert support which is'
echo >> $@.tmp ' * otherwise turned off by default (by design).'
echo >> $@.tmp ' * https://github.com/openssl/openssl/issues/6933 */'
mv -f $@.tmp $@
$(HTTPD_OBJDIR)/mod-proxy-no-threads-2.4.diff:
cd $(HTTPD_OBJDIR) && $(FETCH_CMD) https://stsp.name/mod-proxy-no-threads-2.4.diff
# retrieve httpd
$(HTTPD_OBJDIR)/.retrieved: $(DISTDIR)/$(HTTPD_DIST) \
$(HTTPD_OBJDIR)/ssl-init-proxy-certs.diff \
$(HTTPD_OBJDIR)/mod-proxy-no-threads-2.4.diff
$(call do_check_sha256,$(HTTPD_DIST))
[ -d $(HTTPD_OBJDIR) ] || mkdir -p $(HTTPD_OBJDIR)
tar -C $(SRCDIR) -zxf $(DISTDIR)/$(HTTPD_DIST)
(cd $(HTTPD_SRCDIR) && patch -p0 < $(HTTPD_OBJDIR)/ssl-init-proxy-certs.diff)
(cd $(HTTPD_SRCDIR) && patch -p0 < $(HTTPD_OBJDIR)/mod-proxy-no-threads-2.4.diff)
(cd $(HTTPD_SRCDIR) && svn diff -cr1849590 https://svn.apache.org/repos/asf/httpd/httpd/trunk | patch -p0)
(cd $(HTTPD_SRCDIR) && svn diff -cr1663375 https://svn.apache.org/repos/asf/httpd/httpd/trunk | patch -p0)
touch $@
# configure httpd
$(HTTPD_OBJDIR)/.configured: $(HTTPD_OBJDIR)/.retrieved \
$(APR_UTIL_OBJDIR)/.installed $(PCRE_OBJDIR)/.installed
cd $(HTTPD_SRCDIR) && ./buildconf \
--with-apr="$(PREFIX)/apr/bin/apr-1-config" \
--with-apr-util="$(PREFIX)/apr/bin/apu-1-config"
cd $(HTTPD_OBJDIR) \
&& env CFLAGS="-g $(PROFILE_CFLAGS) -DAPR_POOL_DEBUG" \
CC=$(CC) CXX=$(CXX) \
GREP="`which grep`" \
PKG_CONFIG_PATH=$(PKG_CONFIG_PATH) \
$(HTTPD_SRCDIR)/configure \
--prefix=$(PREFIX)/httpd \
--with-mpm=prefork \
--enable-ssl \
--enable-dav \
--enable-proxy \
--disable-md \
--disable-http2 \
--disable-brotli \
--with-apr="$(PREFIX)/apr/bin/apr-1-config" \
--with-apr-util="$(PREFIX)/apr/bin/apu-1-config" \
--with-pcre="$(PREFIX)/pcre"
touch $@
# compile httpd
$(HTTPD_OBJDIR)/.compiled: $(HTTPD_OBJDIR)/.configured
(cd $(HTTPD_OBJDIR) && env MAKEFLAGS= make -j${MAKE_JOBS})
touch $@
# install httpd
$(HTTPD_OBJDIR)/.installed: $(HTTPD_OBJDIR)/.compiled
(cd $(HTTPD_OBJDIR) && env MAKEFLAGS= make install)
touch $@
# create a httpd.conf for mod_dav_svn
$(HTTPD_CONF):
mkdir -p $(dir $@)
echo > $@.tmp '# httpd config for use with mod_dav_svn'
echo >>$@.tmp 'ServerRoot "$(PREFIX)/httpd"'
echo >>$@.tmp 'Listen localhost:8080'
echo >>$@.tmp 'LoadModule unixd_module modules/mod_unixd.so'
echo >>$@.tmp 'LoadModule alias_module modules/mod_alias.so'
echo >>$@.tmp 'LoadModule access_compat_module modules/mod_access_compat.so'
echo >>$@.tmp 'LoadModule authn_core_module modules/mod_authn_core.so'
echo >>$@.tmp 'LoadModule authn_file_module modules/mod_authn_file.so'
echo >>$@.tmp 'LoadModule authz_core_module modules/mod_authz_core.so'
echo >>$@.tmp 'LoadModule authz_user_module modules/mod_authz_user.so'
echo >>$@.tmp 'LoadModule authz_groupfile_module modules/mod_authz_groupfile.so'
echo >>$@.tmp 'LoadModule auth_basic_module modules/mod_auth_basic.so'
echo >>$@.tmp 'LoadModule dav_module modules/mod_dav.so'
echo >>$@.tmp 'LoadModule dav_svn_module modules/svn-$(WC)/mod_dav_svn.so'
echo >>$@.tmp 'LoadModule authz_svn_module modules/svn-$(WC)/mod_authz_svn.so'
echo >>$@.tmp 'DocumentRoot "$(PREFIX)/httpd/htdocs"'
echo >>$@.tmp ''
echo >>$@.tmp ' Options FollowSymLinks'
echo >>$@.tmp ' AllowOverride None'
echo >>$@.tmp ' Require all denied'
echo >>$@.tmp ''
echo >>$@.tmp ''
echo >>$@.tmp ' DAV svn'
echo >>$@.tmp ' SVNPath /tmp/svn-sandbox/repos'
echo >>$@.tmp ' Require ip localhost'
echo >>$@.tmp ''
mv -f $@.tmp $@
#######################################################################
# neon
#######################################################################
neon-retrieve: $(NEON_OBJDIR)/.retrieved
neon-configure: $(NEON_OBJDIR)/.configured
neon-compile: $(NEON_OBJDIR)/.compiled
neon-install: $(NEON_OBJDIR)/.installed
neon-reset:
$(foreach f, .retrieved .configured .compiled .installed, \
rm -f $(NEON_OBJDIR)/$(f);)
neon-clean:
-(cd $(NEON_OBJDIR) && env MAKEFLAGS= make clean)
# fetch distfile for neon
$(DISTDIR)/$(NEON_DIST):
cd $(DISTDIR) && $(FETCH_CMD) $(NEON_URL)
# retrieve neon
$(NEON_OBJDIR)/.retrieved: $(DISTDIR)/$(NEON_DIST)
$(call do_check_sha256,$(NEON_DIST))
[ -d $(NEON_OBJDIR) ] || mkdir -p $(NEON_OBJDIR)
tar -C $(SRCDIR) -zxf $(DISTDIR)/$(NEON_DIST)
touch $@
# OpenBSD does not have krb5-config in PATH, but the neon port has
# a suitable replacement.
ifeq ($(UNAME),OpenBSD)
KRB5_CONFIG_PATH=/usr/ports/net/neon/files
endif
# configure neon
$(NEON_OBJDIR)/.configured: $(NEON_OBJDIR)/.retrieved
cd $(NEON_SRCDIR) && ./autogen.sh
if [ -n "$(KRB5_CONFIG_PATH)" ] && [ -d "$(KRB5_CONFIG_PATH)" ]; then \
cp $(KRB5_CONFIG_PATH)/krb5-config $(NEON_OBJDIR); \
chmod +x $(NEON_OBJDIR)/krb5-config; \
fi
cd $(NEON_OBJDIR) \
&& env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`" \
CC=$(CC) CXX=$(CXX) \
PKG_CONFIG_PATH=$(PKG_CONFIG_PATH) \
$(NEON_SRCDIR)/configure \
PATH=$(NEON_OBJDIR):$$PATH \
--prefix=$(PREFIX)/neon \
--with-ssl \
--enable-shared \
--without-libproxy
touch $@
# compile neon
$(NEON_OBJDIR)/.compiled: $(NEON_OBJDIR)/.configured
(cd $(NEON_OBJDIR) && env MAKEFLAGS= make -j${MAKE_JOBS})
(cd $(NEON_OBJDIR) && env MAKEFLAGS= make docs)
touch $@
# install neon
$(NEON_OBJDIR)/.installed: $(NEON_OBJDIR)/.compiled
(cd $(NEON_OBJDIR) && env MAKEFLAGS= make install)
touch $@
#######################################################################
# serf
#######################################################################
serf-retrieve: $(SERF_OBJDIR)/.retrieved
serf-configure: $(SERF_OBJDIR)/.configured
serf-compile: $(SERF_OBJDIR)/.compiled
serf-install: $(SERF_OBJDIR)/.installed
serf-reset:
$(foreach f, .retrieved .configured .compiled .installed, \
rm -f $(SERF_OBJDIR)/$(f);)
serf-clean:
-(cd $(SERF_SRCDIR) && scons -c)
# fetch distfile for serf
#$(DISTDIR)/$(SERF_DIST):
# cd $(DISTDIR) && $(FETCH_CMD) $(SERF_URL)
#
# retrieve serf
#$(SERF_OBJDIR)/.retrieved: $(DISTDIR)/$(SERF_DIST)
# [ -d $(SERF_OBJDIR) ] || mkdir -p $(SERF_OBJDIR)
# tar -C $(SRCDIR) -zxf $(DISTDIR)/$(SERF_DIST)
# touch $@
# retrieve serf if not present yet
$(SERF_OBJDIR)/.retrieved:
[ -d $(SERF_OBJDIR) ] || mkdir -p $(SERF_OBJDIR)
if [ ! -d $(SERF_SRCDIR) ]; then \
svn co $(SERF_URL) $(SERF_SRCDIR); \
svn merge ^/serf/branches/1.3.x-sslbuild@1910116 $(SERF_SRCDIR); \
fi
touch $@
# compile serf (serf won't compile outside its source tree)
$(SERF_OBJDIR)/.compiled: $(SERF_OBJDIR)/.retrieved \
$(APR_UTIL_OBJDIR)/.installed
cd $(SERF_SRCDIR) && \
scons -j${MAKE_JOBS} DEBUG=1 \
CFLAGS="-O0 -g $(PROFILE_CFLAGS) -fPIC -DAPR_POOL_DEBUG" \
CC=$(CC) CXX=$(CXX) \
APR=$(PREFIX)/apr \
APU=$(PREFIX)/apr \
PREFIX=$(PREFIX)/serf \
PKG_CONFIG_PATH=$(PKG_CONFIG_PATH)
touch $@
# install serf
$(SERF_OBJDIR)/.installed: $(SERF_OBJDIR)/.compiled
rm -rf $(PREFIX)/serf # XXX scons cannot reinstall :(
cd $(SERF_SRCDIR) && \
scons install
# work around unportable scons shared lib support
-ln -s libserf-1.so.$(shell echo $(SERF_VER) | sed -e 's/[0-9]$$/0/') \
$(PREFIX)/serf/lib/libserf-1.so
-ln -s libserf-1.so.$(shell echo $(SERF_VER) | sed -e 's/[0-9]$$/0/') \
$(PREFIX)/serf/lib/libserf-1.so.$(shell echo $(SERF_VER) | sed -e 's/\.[0-9]$$//')
touch $@
#######################################################################
# sqlite
#######################################################################
sqlite-retrieve: $(SQLITE_OBJDIR)/.retrieved
sqlite-configure: $(SQLITE_OBJDIR)/.configured
sqlite-compile: $(SQLITE_OBJDIR)/.compiled
sqlite-install: $(SQLITE_OBJDIR)/.installed
sqlite-reset:
$(foreach f, .retrieved .configured .compiled .installed, \
rm -f $(SQLITE_OBJDIR)/$(f);)
sqlite-clean:
-cd $(SQLITE_OBJDIR) && env MAKEFLAGS= make clean
# fetch distfile for sqlite
$(DISTDIR)/$(SQLITE_DIST):
cd $(DISTDIR) && $(FETCH_CMD) $(SQLITE_URL)
# retrieve sqlite
$(SQLITE_OBJDIR)/.retrieved: $(DISTDIR)/$(SQLITE_DIST)
$(call do_check_sha256,$(SQLITE_DIST))
[ -d $(SQLITE_OBJDIR) ] || mkdir -p $(SQLITE_OBJDIR)
tar -C $(SRCDIR) -zxf $(DISTDIR)/$(SQLITE_DIST)
touch $@
ifeq ($(THREADING),yes)
THREADSAFE_FLAG=--enable-threadsafe
else
THREADSAFE_FLAG=--disable-threadsafe
endif
# configure sqlite
$(SQLITE_OBJDIR)/.configured: $(SQLITE_OBJDIR)/.retrieved
cd $(SQLITE_OBJDIR) \
&& env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`" \
PKG_CONFIG_PATH=$(PKG_CONFIG_PATH) \
CC=$(CC) CXX=$(CXX) \
$(SQLITE_SRCDIR)/configure \
--prefix=$(PREFIX)/sqlite \
$(THREADSAFE_FLAG)
touch $@
# compile sqlite
$(SQLITE_OBJDIR)/.compiled: $(SQLITE_OBJDIR)/.configured
(cd $(SQLITE_OBJDIR) && env MAKEFLAGS= make -j${MAKE_JOBS})
touch $@
# install sqlite
$(SQLITE_OBJDIR)/.installed: $(SQLITE_OBJDIR)/.compiled
(cd $(SQLITE_OBJDIR) && env MAKEFLAGS= make install)
touch $@
#######################################################################
# cyrus-sasl
#######################################################################
cyrus-sasl-retrieve: $(CYRUS_SASL_OBJDIR)/.retrieved
cyrus-sasl-configure: $(CYRUS_SASL_OBJDIR)/.configured
cyrus-sasl-compile: $(CYRUS_SASL_OBJDIR)/.compiled
cyrus-sasl-install: $(CYRUS_SASL_OBJDIR)/.installed
cyrus-sasl-reset:
$(foreach f, .retrieved .configured .compiled .installed, \
rm -f $(CYRUS_SASL_OBJDIR)/$(f);)
cyrus-sasl-clean:
-(cd $(CYRUS_SASL_OBJDIR) && env MAKEFLAGS= make distclean)
# fetch distfile for cyrus-sasl
$(DISTDIR)/$(CYRUS_SASL_DIST):
cd $(DISTDIR) && $(FETCH_CMD) $(CYRUS_SASL_URL)
# retrieve cyrus-sasl
$(CYRUS_SASL_OBJDIR)/.retrieved: $(DISTDIR)/$(CYRUS_SASL_DIST)
$(call do_check_sha256,$(CYRUS_SASL_DIST))
[ -d $(CYRUS_SASL_OBJDIR) ] || mkdir -p $(CYRUS_SASL_OBJDIR)
tar -C $(SRCDIR) -zxf $(DISTDIR)/$(CYRUS_SASL_DIST)
# fixes build on Debian:
sed 's/#elif WITH_DES/#elif defined(WITH_DES)/' \
< $(CYRUS_SASL_SRCDIR)/plugins/digestmd5.c \
> $(CYRUS_SASL_SRCDIR)/plugins/digestmd5.c.patched
mv $(CYRUS_SASL_SRCDIR)/plugins/digestmd5.c.patched \
$(CYRUS_SASL_SRCDIR)/plugins/digestmd5.c
ifeq ($(UNAME),OpenBSD)
# Fixes GSSAPI support on OpenBSD, which hasn't got libroken:
for f in `grep -l -R -- -lroken $(CYRUS_SASL_SRCDIR)`; do \
sed -e 's/-lroken//g' < $$f > $$f.tmp && \
mv $$f.tmp $$f; \
done
chmod +x $(CYRUS_SASL_SRCDIR)/configure
endif
# Fixes excessive auth log spam from sasl if broken .la files exist
sed 's/SASL_LOG_WARN/SASL_LOG_DEBUG/' \
< $(CYRUS_SASL_SRCDIR)/lib/dlopen.c \
> $(CYRUS_SASL_SRCDIR)/lib/dlopen.c.patched
mv $(CYRUS_SASL_SRCDIR)/lib/dlopen.c.patched \
$(CYRUS_SASL_SRCDIR)/lib/dlopen.c
# Fix a weird autotools error about missing cmulocal dir
(cd $(CYRUS_SASL_SRCDIR)/saslauthd/ && ln -sf ../cmulocal)
# Fix 64-bit time_t format-string issues
sed -i 's/t%020ld"/t%020lld"/' $(CYRUS_SASL_SRCDIR)/plugins/otp.c
touch $@
# configure cyrus-sasl
$(CYRUS_SASL_OBJDIR)/.configured: $(CYRUS_SASL_OBJDIR)/.retrieved \
$(BDB_OBJDIR)/.installed $(SQLITE_OBJDIR)/.installed
cd $(CYRUS_SASL_OBJDIR) \
&& env CFLAGS="-g $(PROFILE_CFLAGS)" \
CC=$(CC) CXX=$(CXX) MAKE=$(MAKE) \
GREP="`which grep`" \
PKG_CONFIG_PATH=$(PKG_CONFIG_PATH) \
$(CYRUS_SASL_SRCDIR)/configure \
--with-dbpath=$(PREFIX)/cyrus-sasl/etc/sasldb2 \
--with-plugindir=$(PREFIX)/cyrus-sasl/lib/sasl2 \
--with-configdir=$(PREFIX)/cyrus-sasl/lib/sasl2 \
--with-bdb-libdir=$(PREFIX)/bdb/lib \
--with-bdb-incdir=$(PREFIX)/bdb/include \
--with-dblib=berkeley \
--with-sqlite=$(PREFIX)/sqlite \
--prefix=$(PREFIX)/cyrus-sasl
touch $@
# compile cyrus-sasl (ignore MAKE_JOBS; multiple jobs cause random build failures)
$(CYRUS_SASL_OBJDIR)/.compiled: $(CYRUS_SASL_OBJDIR)/.configured
(cd $(CYRUS_SASL_OBJDIR) && env MAKE=$(MAKE) MAKEFLAGS= $(MAKE))
touch $@
# install cyrus-sasl
$(CYRUS_SASL_OBJDIR)/.installed: $(CYRUS_SASL_OBJDIR)/.compiled
(cd $(CYRUS_SASL_OBJDIR) && env MAKE=$(MAKE) MAKEFLAGS= $(MAKE) install)
touch $@
#######################################################################
# libmagic
#######################################################################
libmagic-retrieve: $(LIBMAGIC_OBJDIR)/.retrieved
libmagic-configure: $(LIBMAGIC_OBJDIR)/.configured
libmagic-compile: $(LIBMAGIC_OBJDIR)/.compiled
libmagic-install: $(LIBMAGIC_OBJDIR)/.installed
libmagic-reset:
$(foreach f, .retrieved .configured .compiled .installed, \
rm -f $(LIBMAGIC_OBJDIR)/$(f);)
libmagic-clean:
-(cd $(LIBMAGIC_OBJDIR) && env MAKEFLAGS= make distclean)
# fetch distfile for libmagic
$(DISTDIR)/$(LIBMAGIC_DIST):
cd $(DISTDIR) && $(FETCH_CMD) $(LIBMAGIC_URL)
# retrieve libmagic
$(LIBMAGIC_OBJDIR)/.retrieved: $(DISTDIR)/$(LIBMAGIC_DIST)
$(call do_check_sha256,$(LIBMAGIC_DIST))
[ -d $(LIBMAGIC_OBJDIR) ] || mkdir -p $(LIBMAGIC_OBJDIR)
tar -C $(SRCDIR) -zxf $(DISTDIR)/$(LIBMAGIC_DIST)
touch $@
# configure libmagic
$(LIBMAGIC_OBJDIR)/.configured: $(LIBMAGIC_OBJDIR)/.retrieved
cd $(LIBMAGIC_OBJDIR) \
&& env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`"\
CC=$(CC) CXX=$(CXX) \
PKG_CONFIG_PATH=$(PKG_CONFIG_PATH) \
$(LIBMAGIC_SRCDIR)/configure \
--enable-fsect-man5 \
--prefix=$(PREFIX)/libmagic
touch $@
# compile libmagic
$(LIBMAGIC_OBJDIR)/.compiled: $(LIBMAGIC_OBJDIR)/.configured
(cd $(LIBMAGIC_OBJDIR) && env MAKEFLAGS= make -j${MAKE_JOBS})
touch $@
# install libmagic
$(LIBMAGIC_OBJDIR)/.installed: $(LIBMAGIC_OBJDIR)/.compiled
(cd $(LIBMAGIC_OBJDIR) && env MAKEFLAGS= make install)
touch $@
#######################################################################
# ruby
#######################################################################
ruby-retrieve: $(RUBY_OBJDIR)/.retrieved
ruby-configure: $(RUBY_OBJDIR)/.configured
ruby-compile: $(RUBY_OBJDIR)/.compiled
ruby-install: $(RUBY_OBJDIR)/.installed
ruby-reset:
$(foreach f, .retrieved .configured .compiled .installed, \
rm -f $(RUBY_OBJDIR)/$(f);)
ruby-clean:
-(cd $(RUBY_OBJDIR) && env MAKEFLAGS= make distclean)
# fetch distfile for ruby
$(DISTDIR)/$(RUBY_DIST):
cd $(DISTDIR) && $(FETCH_CMD) $(RUBY_URL)
$(RUBY_OBJDIR)/openssl_missing.patch:
mkdir -p $(dir $@)
echo > $@.tmp 'Index: ext/openssl/openssl_missing.h'
echo >> $@.tmp '--- ext/openssl/openssl_missing.h.orig'
echo >> $@.tmp '+++ ext/openssl/openssl_missing.h'
echo >> $@.tmp '@@ -119,6 +119,9 @@ void ossl_HMAC_CTX_free(HMAC_CTX *);'
echo >> $@.tmp ' #if !defined(HAVE_X509_STORE_SET_EX_DATA)'
echo >> $@.tmp ' # define X509_STORE_set_ex_data(x, idx, data) \'
echo >> $@.tmp ' CRYPTO_set_ex_data(&(x)->ex_data, (idx), (data))'
echo >> $@.tmp '+#endif'
echo >> $@.tmp '+'
echo >> $@.tmp '+#if !defined(HAVE_X509_STORE_GET_EX_NEW_INDEX)'
echo >> $@.tmp ' # define X509_STORE_get_ex_new_index(l, p, newf, dupf, freef) \'
echo >> $@.tmp ' CRYPTO_get_ex_new_index(CRYPTO_EX_INDEX_X509_STORE, (l), (p), \'
echo >> $@.tmp ' (newf), (dupf), (freef))'
echo >> $@.tmp '@@ -192,6 +195,7 @@ void ossl_X509_REQ_get0_signature(const X509_REQ *, co'
echo >> $@.tmp ' #endif'
echo >> $@.tmp ' '
echo >> $@.tmp ' #if !defined(HAVE_OPAQUE_OPENSSL)'
echo >> $@.tmp '+#if defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x2070000fL'
echo >> $@.tmp ' #define IMPL_PKEY_GETTER(_type, _name) \'
echo >> $@.tmp ' static inline _type *EVP_PKEY_get0_##_type(EVP_PKEY *pkey) { \'
echo >> $@.tmp ' return pkey->pkey._name; }'
echo >> $@.tmp '@@ -243,6 +247,7 @@ IMPL_PKEY_GETTER(EC_KEY, ec)'
echo >> $@.tmp ' #undef IMPL_PKEY_GETTER'
echo >> $@.tmp ' #undef IMPL_KEY_ACCESSOR2'
echo >> $@.tmp ' #undef IMPL_KEY_ACCESSOR3'
echo >> $@.tmp '+#endif'
echo >> $@.tmp ' #endif /* HAVE_OPAQUE_OPENSSL */'
echo >> $@.tmp ' '
echo >> $@.tmp ' #if defined(HAVE_AUTHENTICATED_ENCRYPTION) && !defined(EVP_CTRL_AEAD_GET_TAG)'
mv -f $@.tmp $@
$(RUBY_OBJDIR)/sparc64_buserror.patch:
mkdir -p $(dir $@)
echo > $@.tmp '--- compile.c.orig Thu Mar 12 12:58:26 2020'
echo >> $@.tmp '+++ compile.c Thu Mar 12 16:36:55 2020'
echo >> $@.tmp '@@ -751,6 +751,16 @@'
echo >> $@.tmp ' #define STRICT_ALIGNMENT'
echo >> $@.tmp ' #endif'
echo >> $@.tmp ' '
echo >> $@.tmp '+/*'
echo >> $@.tmp '+ * Some OpenBSD platforms (including sparc64) require strict alignment.'
echo >> $@.tmp '+ */'
echo >> $@.tmp '+#if defined(__OpenBSD__)'
echo >> $@.tmp '+ #include '
echo >> $@.tmp '+ #ifdef __STRICT_ALIGNMENT'
echo >> $@.tmp '+ #define STRICT_ALIGNMENT'
echo >> $@.tmp '+ #endif'
echo >> $@.tmp '+#endif'
echo >> $@.tmp '+'
echo >> $@.tmp ' #ifdef STRICT_ALIGNMENT'
echo >> $@.tmp ' #if defined(HAVE_TRUE_LONG_LONG) && SIZEOF_LONG_LONG > SIZEOF_VALUE'
echo >> $@.tmp ' #define ALIGNMENT_SIZE SIZEOF_LONG_LONG'
mv -f $@.tmp $@
ifeq ($(UNAME),OpenBSD)
RUBY_SSL_EX_NEW_DATA_PATCH = sed -i -e '/^have_func("X509_STORE_set_ex_data")$$/ { p; s/^.*$$/\have_func("X509_STORE_get_ex_new_index")/; }'
else
RUBY_SSL_EX_NEW_DATA_PATCH = true
endif
# retrieve ruby
#
$(RUBY_OBJDIR)/.retrieved: $(DISTDIR)/$(RUBY_DIST) $(RUBY_OBJDIR)/openssl_missing.patch $(RUBY_OBJDIR)/sparc64_buserror.patch
$(call do_check_sha256,$(RUBY_DIST))
[ -d $(RUBY_OBJDIR) ] || mkdir -p $(RUBY_OBJDIR)
tar -C $(SRCDIR) -zxf $(DISTDIR)/$(RUBY_DIST)
-which ghead && sed -i -e "s/head -c/ghead -c/" $(RUBY_SRCDIR)/configure
$(RUBY_SSL_EX_NEW_DATA_PATCH) $(RUBY_SRCDIR)/ext/openssl/extconf.rb
cd $(RUBY_SRCDIR) && patch -p0 < $(RUBY_OBJDIR)/openssl_missing.patch
cd $(RUBY_SRCDIR) && patch -p0 < $(RUBY_OBJDIR)/sparc64_buserror.patch
sed -i 's/X509_num(bs->certs)/X509_num(OCSP_resp_get0_certs(bs))/' \
$(RUBY_SRCDIR)/ext/openssl/ossl_ocsp.c
touch $@
ifeq ($(THREADING),yes)
THREADSAFE_FLAG=--enable-pthread
else
THREADSAFE_FLAG=--disable-pthread
endif
# configure ruby
$(RUBY_OBJDIR)/.configured: $(RUBY_OBJDIR)/.retrieved
cd $(RUBY_OBJDIR) \
&& env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`"\
CC=$(CC) CXX=$(CXX) \
PKG_CONFIG_PATH=$(PKG_CONFIG_PATH) \
$(RUBY_SRCDIR)/configure \
--prefix=$(PREFIX)/ruby \
--enable-shared \
--with-baseruby="$(RUBY)" \
$(THREADSAFE_FLAG) \
--disable-install-doc \
--without-valgrind \
--without-gmp
touch $@
# compile ruby (ignore MAKE_JOBS; multiple jobs cause random build failures)
$(RUBY_OBJDIR)/.compiled: $(RUBY_OBJDIR)/.configured
(cd $(RUBY_OBJDIR) && env MAKEFLAGS= make)
touch $@
# install ruby
$(RUBY_OBJDIR)/.installed: $(RUBY_OBJDIR)/.compiled
(cd $(RUBY_OBJDIR) && env MAKEFLAGS= make install)
touch $@
#######################################################################
# bz2
#######################################################################
bz2-retrieve: $(BZ2_OBJDIR)/.retrieved
bz2-compile: $(BZ2_OBJDIR)/.compiled
bz2-install: $(BZ2_OBJDIR)/.installed
bz2-reset:
$(foreach f, .retrieved .configured .compiled .installed, \
rm -f $(BZ2_OBJDIR)/$(f);)
bz2-clean:
-(cd $(BZ2_SRCDIR) && env MAKEFLAGS= make distclean)
# fetch distfile for bz2
$(DISTDIR)/$(BZ2_DIST):
cd $(DISTDIR) && $(FETCH_CMD) $(BZ2_URL)
# retrieve bz2
$(BZ2_OBJDIR)/.retrieved: $(DISTDIR)/$(BZ2_DIST)
$(call do_check_sha256,$(BZ2_DIST))
[ -d $(BZ2_OBJDIR) ] || mkdir -p $(BZ2_OBJDIR)
tar -C $(SRCDIR) -zxf $(DISTDIR)/$(BZ2_DIST)
touch $@
# compile bz2
$(BZ2_OBJDIR)/.compiled: $(BZ2_OBJDIR)/.retrieved
(cd $(BZ2_SRCDIR) && env MAKEFLAGS= make CC=$(CC) CXX=$(CXX) \
CFLAGS="-g $(PROFILE_CFLAGS) -fPIC" -j${MAKE_JOBS})
touch $@
# install bz2
$(BZ2_OBJDIR)/.installed: $(BZ2_OBJDIR)/.compiled
(cd $(BZ2_SRCDIR) && env MAKEFLAGS= make install PREFIX=$(PREFIX)/bz2)
touch $@
#######################################################################
# python
#######################################################################
python-retrieve: $(PYTHON_OBJDIR)/.retrieved
python-configure: $(PYTHON_OBJDIR)/.configured
python-compile: $(PYTHON_OBJDIR)/.compiled
python-install: $(PYTHON_OBJDIR)/.installed
python-reset:
$(foreach f, .retrieved .configured .compiled .installed, \
rm -f $(PYTHON_OBJDIR)/$(f);)
python-clean:
-(cd $(PYTHON_OBJDIR) && env MAKEFLAGS= make distclean)
# fetch distfile for python
$(DISTDIR)/$(PYTHON_DIST):
cd $(DISTDIR) && $(FETCH_CMD) $(PYTHON_URL)
$(PYTHON_OBJDIR)/openbsd-march.diff:
mkdir -p $(dir $@)
echo >$@.tmp '--- configure.ac.orig Mon Nov 21 13:32:19 2022'
echo >>$@.tmp '+++ configure.ac Mon Nov 21 13:32:40 2022'
echo >>$@.tmp '@@ -878,2 +878,3 @@'
echo >>$@.tmp ' [FreeBSD*], [MULTIARCH=""],'
echo >>$@.tmp '+ [OpenBSD*], [MULTIARCH=""],'
echo >>$@.tmp ' [MULTIARCH=$$($$CC --print-multiarch 2>/dev/null)]'
mv -f $@.tmp $@
# retrieve python
#
$(PYTHON_OBJDIR)/.retrieved: $(DISTDIR)/$(PYTHON_DIST) $(PYTHON_OBJDIR)/openbsd-march.diff
$(call do_check_sha256,$(PYTHON_DIST))
[ -d $(PYTHON_OBJDIR) ] || mkdir -p $(PYTHON_OBJDIR)
tar -C $(SRCDIR) -zxf $(DISTDIR)/$(PYTHON_DIST)
# Make setup.py use our own dependencies instead of system ones
sed -e "s#sqlite_inc_paths = \[ '/usr/include',#sqlite_inc_paths = [ '$(PREFIX)/sqlite/include',#" \
-e "s#'/usr/include/db4'#'$(PREFIX)/bdb/include'#" \
-e "s|\(add_dir_to_list(self.compiler.library_dirs, '/usr/local/lib')\)|pass #\1|" \
-e "s|\(add_dir_to_list(self.compiler.include_dirs, '/usr/local/include')\)|pass #\1|" \
-e "s#find_library_file(lib_dirs, 'bz2'#find_library_file(['$(PREFIX)/bz2/lib'] + lib_dirs, 'bz2'#" \
< $(PYTHON_SRCDIR)/setup.py \
> $(PYTHON_SRCDIR)/setup.py.patched
mv $(PYTHON_SRCDIR)/setup.py.patched $(PYTHON_SRCDIR)/setup.py
chmod +x $(PYTHON_SRCDIR)/setup.py
cd $(PYTHON_SRCDIR) && patch -p0 < $(PYTHON_OBJDIR)/openbsd-march.diff
touch $@
# configure python
ifdef PROFILE
PYTHON_PROFILING=--enable-profiling
endif
$(PYTHON_OBJDIR)/.configured: $(PYTHON_OBJDIR)/.retrieved \
$(BZ2_OBJDIR)/.installed
cd $(PYTHON_SRCDIR) && autoconf
cd $(PYTHON_OBJDIR) \
&& env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`" \
CC=$(CC) CXX=$(CXX) \
CPPFLAGS="-I$(PREFIX)/bz2/include" \
LDFLAGS="-Wl,-rpath=$(PREFIX)/python/lib -L$(PREFIX)/bz2/lib" \
LD_LIBRARY_PATH="$(LD_LIBRARY_PATH):$(PREFIX)/python/lib:$$LD_LIBRARY_PATH" \
PKG_CONFIG_PATH=$(PKG_CONFIG_PATH) \
$(PYTHON_SRCDIR)/configure \
--prefix=$(PREFIX)/python \
--enable-shared \
--with-system-expat \
--with-dbmliborder=bdb \
--without-pymalloc \
$(PYTHON_PROFILING)
touch $@
# compile python
$(PYTHON_OBJDIR)/.compiled: $(PYTHON_OBJDIR)/.configured
(cd $(PYTHON_OBJDIR) && \
env MAKEFLAGS= \
LD_LIBRARY_PATH="$(LD_LIBRARY_PATH):$(PREFIX)/python/lib:$$LD_LIBRARY_PATH" \
make -j${MAKE_JOBS})
touch $@
# install python
$(PYTHON_OBJDIR)/.installed: $(PYTHON_OBJDIR)/.compiled
(cd $(PYTHON_OBJDIR) && \
env MAKEFLAGS= \
LD_LIBRARY_PATH="$(LD_LIBRARY_PATH):$(PREFIX)/python/lib:$$LD_LIBRARY_PATH" \
make install)
ln -sf $(PREFIX)/python/bin/python3 $(PREFIX)/python/bin/python
touch $@
#######################################################################
# python 2
#######################################################################
python2-retrieve: $(PYTHON2_OBJDIR)/.retrieved
python2-configure: $(PYTHON2_OBJDIR)/.configured
python2-compile: $(PYTHON2_OBJDIR)/.compiled
python2-install: $(PYTHON2_OBJDIR)/.installed
python2-reset:
$(foreach f, .retrieved .configured .compiled .installed, \
rm -f $(PYTHON2_OBJDIR)/$(f);)
python2-clean:
-(cd $(PYTHON2_OBJDIR) && env MAKEFLAGS= make distclean)
# fetch distfile for python 2
$(DISTDIR)/$(PYTHON2_DIST):
cd $(DISTDIR) && $(FETCH_CMD) $(PYTHON2_URL)
# https://bugs.python.org/issue12560
$(DISTDIR)/python-issue12560.patch:
cd $(DISTDIR) && $(FETCH_CMD) -O "$@" \
https://hg.python.org/cpython/raw-rev/32cc37a89b58
# retrieve python 2
#
$(PYTHON2_OBJDIR)/.retrieved: $(DISTDIR)/$(PYTHON2_DIST) $(DISTDIR)/python-issue12560.patch
$(call do_check_sha256,$(PYTHON2_DIST))
[ -d $(PYTHON2_OBJDIR) ] || mkdir -p $(PYTHON2_OBJDIR)
tar -C $(SRCDIR) -zxf $(DISTDIR)/$(PYTHON2_DIST)
# Make setup.py use our own dependencies instead of system ones
sed -e "s#sqlite_inc_paths = \[ '/usr/include',#sqlite_inc_paths = [ '$(PREFIX)/sqlite/include',#" \
-e "s#'/usr/include/db4'#'$(PREFIX)/bdb/include'#" \
-e "s|\(add_dir_to_list(self.compiler.library_dirs, '/usr/local/lib')\)|pass #\1|" \
-e "s|\(add_dir_to_list(self.compiler.include_dirs, '/usr/local/include')\)|pass #\1|" \
-e "s#find_library_file(lib_dirs, 'bz2'#find_library_file(['$(PREFIX)/bz2/lib'] + lib_dirs, 'bz2'#" \
< $(PYTHON2_SRCDIR)/setup.py \
> $(PYTHON2_SRCDIR)/setup.py.patched
mv $(PYTHON2_SRCDIR)/setup.py.patched $(PYTHON2_SRCDIR)/setup.py
chmod +x $(PYTHON2_SRCDIR)/setup.py
cd $(PYTHON2_SRCDIR) && patch -p1 < $(DISTDIR)/python-issue12560.patch
mkdir -p $(PYTHON2_OBJDIR)/bin
ln -sf "`which python2`" $(PYTHON2_OBJDIR)/bin/python
touch $@
# configure python 2
ifdef PROFILE
PYTHON2_PROFILING=--enable-profiling
endif
$(PYTHON2_OBJDIR)/.configured: $(PYTHON2_OBJDIR)/.retrieved \
$(BZ2_OBJDIR)/.installed
cd $(PYTHON2_OBJDIR) \
&& env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`" \
CC=$(CC) CXX=$(CXX) \
CPPFLAGS="-I$(PREFIX)/bz2/include" \
LDFLAGS="-Wl,-rpath=$(PREFIX)/python2/lib -L$(PREFIX)/bz2/lib" \
LD_LIBRARY_PATH="$(LD_LIBRARY_PATH):$(PREFIX)/python2/lib:$$LD_LIBRARY_PATH" \
PKG_CONFIG_PATH=$(PKG_CONFIG_PATH) \
PATH=$(PYTHON2_OBJDIR)/bin:$$PATH \
$(PYTHON2_SRCDIR)/configure \
--prefix=$(PREFIX)/python2 \
--enable-shared \
--with-system-expat \
--with-dbmliborder=bdb \
--without-pymalloc \
$(PYTHON2_PROFILING)
touch $@
# compile python 2
$(PYTHON2_OBJDIR)/.compiled: $(PYTHON2_OBJDIR)/.configured
(cd $(PYTHON2_OBJDIR) && \
env MAKEFLAGS= \
LD_LIBRARY_PATH="$(LD_LIBRARY_PATH):$(PREFIX)/python2/lib:$$LD_LIBRARY_PATH" \
PATH=$(PYTHON2_OBJDIR)/bin:$$PATH \
make -j${MAKE_JOBS})
touch $@
# install python 2
$(PYTHON2_OBJDIR)/.installed: $(PYTHON2_OBJDIR)/.compiled
(cd $(PYTHON2_OBJDIR) && \
env MAKEFLAGS= \
LD_LIBRARY_PATH="$(LD_LIBRARY_PATH):$(PREFIX)/python2/lib:$$LD_LIBRARY_PATH" \
PATH=$(PYTHON2_OBJDIR)/bin:$$PATH \
make install)
ln -sf $(PREFIX)/python2/bin/python2 $(PREFIX)/python2/bin/python
touch $@
#######################################################################
# py3c
#######################################################################
py3c-retrieve: $(PY3C_OBJDIR)/.retrieved
py3c-reset:
$(foreach f, .retrieved .configured .compiled .installed, \
rm -f $(PY3C_OBJDIR)/$(f);)
# fetch distfile for py3c
$(DISTDIR)/$(PY3C_DIST):
cd $(DISTDIR) && $(FETCH_CMD) $(PY3C_URL)
# retrieve py3c
$(PY3C_OBJDIR)/.retrieved: $(DISTDIR)/$(PY3C_DIST)
$(call do_check_sha256,$(PY3C_DIST))
[ -d $(PY3C_OBJDIR) ] || mkdir -p $(PY3C_OBJDIR)
tar -C $(SRCDIR) -zxf $(DISTDIR)/$(PY3C_DIST)
touch $@
#######################################################################
# junit
#######################################################################
# fetch distfile for junit
$(DISTDIR)/$(JUNIT_DIST):
cd $(DISTDIR) && $(FETCH_CMD) $(JUNIT_URL)
$(call do_check_sha256,$(JUNIT_DIST))
#######################################################################
# gettext
#######################################################################
gettext-retrieve: $(GETTEXT_OBJDIR)/.retrieved
gettext-configure: $(GETTEXT_OBJDIR)/.configured
gettext-compile: $(GETTEXT_OBJDIR)/.compiled
gettext-install: $(GETTEXT_OBJDIR)/.installed
gettext-reset:
$(foreach f, .retrieved .configured .compiled .installed, \
rm -f $(GETTEXT_OBJDIR)/$(f);)
gettext-clean:
-(cd $(GETTEXT_SRCDIR) && env MAKEFLAGS= make clean)
# fetch distfile for gettext
$(DISTDIR)/$(GETTEXT_DIST):
cd $(DISTDIR) && $(FETCH_CMD) $(GETTEXT_URL)
# retrieve gettext
$(GETTEXT_OBJDIR)/.retrieved: $(DISTDIR)/$(GETTEXT_DIST)
$(call do_check_sha256,$(GETTEXT_DIST))
[ -d $(GETTEXT_OBJDIR) ] || mkdir -p $(GETTEXT_OBJDIR)
tar -C $(SRCDIR) -zxf $(DISTDIR)/$(GETTEXT_DIST)
touch $@
# (gettext won't compile outside its source tree)
# configure gettext
$(GETTEXT_OBJDIR)/.configured: $(GETTEXT_OBJDIR)/.retrieved
cd $(GETTEXT_SRCDIR) \
&& env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`"\
CC=$(CC) CXX=$(CXX) \
LDFLAGS="-L$(PREFIX)/iconv/lib" \
PKG_CONFIG_PATH=$(PKG_CONFIG_PATH) \
$(GETTEXT_SRCDIR)/configure \
--prefix=$(PREFIX)/gettext \
--with-libiconv-prefix=$(PREFIX)/iconv \
--disable-c++ \
--disable-java \
--disable-csharp \
$(THREADS_FLAG)
-which gsed && \
sed -e 's/sed /gsed /g' < $(GETTEXT_SRCDIR)/build-aux/moopp \
> $(GETTEXT_SRCDIR)/build-aux/moopp.fixed && \
mv $(GETTEXT_SRCDIR)/build-aux/moopp.fixed \
$(GETTEXT_SRCDIR)/build-aux/moopp && \
chmod +x $(GETTEXT_SRCDIR)/build-aux/moopp
touch $@
# compile gettext
$(GETTEXT_OBJDIR)/.compiled: $(GETTEXT_OBJDIR)/.configured
(cd $(GETTEXT_SRCDIR) && env MAKEFLAGS= make -j${MAKE_JOBS})
touch $@
# install gettext
$(GETTEXT_OBJDIR)/.installed: $(GETTEXT_OBJDIR)/.compiled
(cd $(GETTEXT_SRCDIR) && env MAKEFLAGS= make install)
touch $@
#######################################################################
# lz4
#######################################################################
lz4-retrieve: $(LZ4_OBJDIR)/.retrieved
lz4-configure: $(LZ4_OBJDIR)/.configured
lz4-compile: $(LZ4_OBJDIR)/.compiled
lz4-install: $(LZ4_OBJDIR)/.installed
lz4-reset:
$(foreach f, .retrieved .configured .compiled .installed, \
rm -f $(LZ4_OBJDIR)/$(f);)
lz4-clean:
-(cd $(LZ4_SRCDIR) && env MAKEFLAGS= $(MAKE) clean)
# fetch distfile for lz4
$(DISTDIR)/$(LZ4_DIST):
cd $(DISTDIR) && $(FETCH_CMD) -O $(LZ4_DIST) $(LZ4_URL)
# retrieve lz4
$(LZ4_OBJDIR)/.retrieved: $(DISTDIR)/$(LZ4_DIST)
$(call do_check_sha256,$(LZ4_DIST))
[ -d $(LZ4_OBJDIR) ] || mkdir -p $(LZ4_OBJDIR)
tar -C $(SRCDIR) -zxf $(DISTDIR)/$(LZ4_DIST)
touch $@
# configure lz4
$(LZ4_OBJDIR)/.configured: $(LZ4_OBJDIR)/.retrieved
touch $@
# compile lz4
$(LZ4_OBJDIR)/.compiled: $(LZ4_OBJDIR)/.configured
(cd $(LZ4_SRCDIR)/lib && \
env MAKEFLAGS= $(MAKE) CC=$(CC) CXX=$(CXX) \
-j${MAKE_JOBS} PREFIX=$(PREFIX)/lz4)
touch $@
# install lz4
$(LZ4_OBJDIR)/.installed: $(LZ4_OBJDIR)/.compiled
mkdir -p $(PREFIX)/lz4/lib
(cd $(LZ4_SRCDIR)/lib && \
env MAKEFLAGS= $(MAKE) PREFIX=$(PREFIX)/lz4 install)
touch $@
#######################################################################
# swig-old
#######################################################################
swig-old-retrieve: $(SWIG_OLD_OBJDIR)/.retrieved
swig-old-configure: $(SWIG_OLD_OBJDIR)/.configured
swig-old-compile: $(SWIG_OLD_OBJDIR)/.compiled
swig-old-install: $(SWIG_OLD_OBJDIR)/.installed
swig-old-reset:
$(foreach f, .retrieved .configured .compiled .installed, \
rm -f $(SWIG_OLD_OBJDIR)/$(f);)
swig-old-clean:
-(cd $(SWIG_OLD_SRCDIR) && env MAKEFLAGS= $(MAKE) clean)
# fetch distfile for swig-old
$(DISTDIR)/$(SWIG_OLD_DIST):
cd $(DISTDIR) && $(FETCH_CMD) -O $(SWIG_OLD_DIST) $(SWIG_OLD_URL)
# retrieve swig-old
$(SWIG_OLD_OBJDIR)/.retrieved: $(DISTDIR)/$(SWIG_OLD_DIST)
$(call do_check_sha256,$(SWIG_OLD_DIST))
[ -d $(SWIG_OLD_OBJDIR) ] || mkdir -p $(SWIG_OLD_OBJDIR)
tar -C $(SRCDIR) -zxf $(DISTDIR)/$(SWIG_OLD_DIST)
touch $@
# configure swig-old
$(SWIG_OLD_OBJDIR)/.configured: $(SWIG_OLD_OBJDIR)/.retrieved
cd $(SWIG_OLD_SRCDIR) \
&& env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`"\
CC=$(CC) CXX=$(CXX) \
LDFLAGS="-L$(PREFIX)/iconv/lib" \
PKG_CONFIG_PATH=$(PKG_CONFIG_PATH) \
$(SWIG_OLD_SRCDIR)/configure \
--prefix=$(PREFIX)/swig-old
touch $@
# compile swig-old
$(SWIG_OLD_OBJDIR)/.compiled: $(SWIG_OLD_OBJDIR)/.configured
(cd $(SWIG_OLD_SRCDIR) && \
env MAKEFLAGS= $(MAKE) CC=$(CC) CXX=$(CXX) \
-j${MAKE_JOBS} PREFIX=$(PREFIX)/swig-old)
touch $@
# install swig-old
$(SWIG_OLD_OBJDIR)/.installed: $(SWIG_OLD_OBJDIR)/.compiled
(cd $(SWIG_OLD_SRCDIR) && \
env MAKEFLAGS= $(MAKE) PREFIX=$(PREFIX)/swig-old install)
touch $@
#######################################################################
# svn
#######################################################################
.PHONY: svn-configure svn-compile svn-install svn-bindings-compile \
svn-bindings-install svn-bindings-reset svn-clean
svn-install-all: svn-install svn-bindings-install
svn-retrieve: $(SVN_OBJDIR)/.retrieved
svn-configure: $(SVN_OBJDIR)/.configured
svn-compile: $(SVN_OBJDIR)/.compiled
svn-bindings-compile: $(SVN_OBJDIR)/.bindings-compiled
svn-install: $(SVN_OBJDIR)/.installed
svn-bindings-install: $(SVN_OBJDIR)/.bindings-installed
svn-bindings-reset:
$(foreach f, .bindings-compiled .bindings-installed, \
rm -f $(SVN_OBJDIR)/$(f);)
svn-reset: svn-bindings-reset
$(foreach f, .retrieved .configured .compiled .installed \
.bindings-compiled .bindings-installed, \
rm -f $(SVN_OBJDIR)/$(f);)
svn-clean:
-(cd $(svn_builddir) && env MAKEFLAGS= make distclean)
# retrieve svn if not present yet
$(SVN_OBJDIR)/.retrieved:
[ -d $(SVN_OBJDIR) ] || mkdir -p $(SVN_OBJDIR)
if [ "$(TAG)" != "none" ]; then \
branchdir="tags/$(TAG)"; \
co="export"; \
elif [ $(BRANCH) != trunk ]; then \
branchdir="branches/$(BRANCH)"; \
co="co"; \
else \
branchdir="$(BRANCH)"; \
co="co"; \
fi; \
if [ ! -d $(SVN_WC) ] && [ ! -h $(SVN_WC) ]; then \
svn $${co} $(SUBVERSION_REPOS_URL)/$${branchdir} \
$(SVN_WC); \
fi
touch $@
ifeq ($(BRANCH_MAJOR),1.7)
BDB_FLAG=db.h:$(PREFIX)/bdb/include:$(PREFIX)/bdb/lib:db-$(BDB_MAJOR_VER)
SERF_LDFLAG=-Wl,-rpath,$(PREFIX)/serf/lib -Wl,-rpath,$(PREFIX)/bdb/lib
MOD_DAV_SVN=modules/svn-$(WC)/mod_dav_svn.so
MOD_AUTHZ_SVN=modules/svn-$(WC)/mod_authz_svn.so
MOD_DONTDOTHAT=modules/svn-$(WC)/mod_dontdothat.so
LIBMAGIC_FLAG=--with-libmagic=$(PREFIX)/libmagic
NEON_FLAG=--with-neon="$(PREFIX)/neon"
JAVAHL_CHECK_TARGET=check-javahl
SWIG_OLD_FLAG=--with-swig=$(PREFIX)/swig-old/bin/swig
else ifeq ($(BRANCH_MAJOR),1.6)
BDB_FLAG=db.h:$(PREFIX)/bdb/include:$(PREFIX)/bdb/lib:db-$(BDB_MAJOR_VER)
SERF_LDFLAG=-Wl,-rpath,$(PREFIX)/serf/lib -Wl,-rpath,$(PREFIX)/bdb/lib
MOD_DAV_SVN=modules/svn-$(WC)/mod_dav_svn.so
MOD_AUTHZ_SVN=modules/svn-$(WC)/mod_authz_svn.so
MOD_DONTDOTHAT=modules/svn-$(WC)/mod_dontdothat.so
W_NO_SYSTEM_HEADERS=-Wno-system-headers
NEON_FLAG=--with-neon="$(PREFIX)/neon"
JAVAHL_CHECK_TARGET=check-javahl
SWIG_OLD_FLAG=--with-swig=$(PREFIX)/swig-old/bin/swig
else ifeq ($(BRANCH_MAJOR), $(filter 1.8 1.9, $(BRANCH_MAJOR)))
BDB_FLAG=db.h:$(PREFIX)/bdb/include:$(PREFIX)/bdb/lib:db-$(BDB_MAJOR_VER)
# serf >= 1.3.0 is built with scons and no longer sets up rpath linker flags,
# so we have to do that ourselves :(
SERF_LDFLAG=-Wl,-rpath,$(PREFIX)/serf/lib -Wl,-rpath,$(PREFIX)/bdb/lib
MOD_DAV_SVN=modules/svn-$(WC)/mod_dav_svn.so
MOD_AUTHZ_SVN=modules/svn-$(WC)/mod_authz_svn.so
MOD_DONTDOTHAT=modules/svn-$(WC)/mod_dontdothat.so
LIBMAGIC_FLAG=--with-libmagic=$(PREFIX)/libmagic
JAVAHL_CHECK_TARGET=check-all-javahl
SWIG_OLD_FLAG=--with-swig=$(PREFIX)/swig-old/bin/swig
else ifeq ($(BRANCH_MAJOR), $(filter 1.10 1.11, 1.12, 1.13 $(BRANCH_MAJOR)))
BDB_FLAG=db.h:$(PREFIX)/bdb/include:$(PREFIX)/bdb/lib:db-$(BDB_MAJOR_VER)
# serf >= 1.3.0 is built with scons and no longer sets up rpath linker flags,
# so we have to do that ourselves :(
SERF_LDFLAG=-Wl,-rpath,$(PREFIX)/serf/lib -Wl,-rpath,$(PREFIX)/bdb/lib
LZ4_LDFLAG=-Wl,-rpath,$(PREFIX)/lz4/lib
MOD_DAV_SVN=modules/svn-$(WC)/mod_dav_svn.so
MOD_AUTHZ_SVN=modules/svn-$(WC)/mod_authz_svn.so
MOD_DONTDOTHAT=modules/svn-$(WC)/mod_dontdothat.so
LIBMAGIC_FLAG=--with-libmagic=$(PREFIX)/libmagic
JAVAHL_CHECK_TARGET=check-all-javahl
LZ4_FLAG=--with-lz4=$(PREFIX)/lz4
UTF8PROC_FLAG=--with-utf8proc=internal
SWIG_OLD_FLAG=--with-swig=$(PREFIX)/swig-old/bin/swig
else # 1.14, trunk
BDB_FLAG=db.h:$(PREFIX)/bdb/include:$(PREFIX)/bdb/lib:db-$(BDB_MAJOR_VER)
# serf >= 1.3.0 is built with scons and no longer sets up rpath linker flags,
# so we have to do that ourselves :(
SERF_LDFLAG=-Wl,-rpath,$(PREFIX)/serf/lib -Wl,-rpath,$(PREFIX)/bdb/lib
LZ4_LDFLAG=-Wl,-rpath,$(PREFIX)/lz4/lib
MOD_DAV_SVN=modules/svn-$(WC)/mod_dav_svn.so
MOD_AUTHZ_SVN=modules/svn-$(WC)/mod_authz_svn.so
MOD_DONTDOTHAT=modules/svn-$(WC)/mod_dontdothat.so
LIBMAGIC_FLAG=--with-libmagic=$(PREFIX)/libmagic
JAVAHL_CHECK_TARGET=check-all-javahl
LZ4_FLAG=--with-lz4=$(PREFIX)/lz4
UTF8PROC_FLAG=--with-utf8proc=internal
endif
ifeq ($(ENABLE_JAVA_BINDINGS),yes)
JAVAHL_FLAG=--enable-javahl=yes --with-jdk --with-jikes=no \
--with-junit=$(DISTDIR)/$(JUNIT_DIST)
else
JAVAHL_FLAG=--with-jdk=no
endif
ifdef PROFILE
SVN_STATIC_FLAG=--enable-all-static
else
SVN_STATIC_FLAG=--disable-static
SVN_WITH_HTTPD=--with-apxs="$(PREFIX)/httpd/bin/apxs" \
--with-apache-libexecdir="$(PREFIX)/httpd/modules/svn-$(WC)"
SVN_WITH_SASL=--with-sasl="$(PREFIX)/cyrus-sasl"
endif
# On OpenBSD, MExtUtils -e ldopts outputs -L/usr/local/lib, which can
# cause us to link Perl bindings against the wrong set of SVN libraries.
# As a workaround, we patch the configure script after it has been generated.
ifeq ($(UNAME),OpenBSD)
SWIG_PL_INCLUDES_HACK= sed -i 's^\($$PERL -MExtUtils::Embed -e ccopts\)^\1 | sed -e s@-I/usr/local/include@@^' $(svn_builddir)/configure
SWIG_PL_LINK_HACK= sed -i 's^\($$PERL -MExtUtils::Embed -e ldopts\)^\1 | sed -e s@-L/usr/local/lib@@^' $(svn_builddir)/configure
else
SWIG_PL_INCLUDES_HACK=true
SWIG_PL_LINK_HACK=true
endif
$(SVN_OBJDIR)/.configured: $(SVN_OBJDIR)/.retrieved $(DISTDIR)/$(JUNIT_DIST) \
$(APR_OBJDIR)/.installed $(APR_UTIL_OBJDIR)/.installed \
$(BDB_OBJDIR)/.installed $(SQLITE_OBJDIR)/.installed \
$(HTTPD_OBJDIR)/.installed $(CYRUS_SASL_OBJDIR)/.installed \
$(LIBMAGIC_OBJDIR)/.installed $(NEON_OBJDIR)/.installed \
$(SERF_OBJDIR)/.installed \
$(RUBY_OBJDIR)/.installed $(PYTHON_OBJDIR)/.installed
cd $(SVN_SRCDIR) && ./autogen.sh
$(SWIG_PL_INCLUDES_HACK)
$(SWIG_PL_LINK_HACK)
cd $(svn_builddir) && \
env LDFLAGS="-L$(PREFIX)/neon/lib -L$(PREFIX)/apr/lib -L$(PREFIX)/serf/lib $(SERF_LDFLAG) -lcrypto -lssl $(LZ4_LDFLAG) -L$(PREFIX)/gettext/lib -L$(PREFIX)/iconv/lib" \
CC=$(CC) CXX=$(CXX) \
CFLAGS="-I$(PREFIX)/gettext/include -DAPR_POOL_DEBUG" \
CXXFLAGS="-I$(PREFIX)/gettext/include -DAPR_POOL_DEBUG" \
LD_LIBRARY_PATH="$(LD_LIBRARY_PATH):$(PREFIX)/$(PYTHON)/lib:$$LD_LIBRARY_PATH" \
PKG_CONFIG_PATH=$(PKG_CONFIG_PATH):$(PREFIX)/$(PYTHON)/lib/pkgconfig \
PYTHON=$(PREFIX)/$(PYTHON)/bin/python \
GREP="`which grep`" \
PATH=$(PREFIX)/ruby/bin:$(PREFIX)/$(PYTHON)/bin:$(PREFIX)/gettext/bin:$$PATH \
$(SVN_SRCDIR)/configure \
--enable-maintainer-mode \
--prefix="$(SVN_PREFIX)" \
--with-apr="$(PREFIX)/apr" \
--with-apr-util="$(PREFIX)/apr" \
$(NEON_FLAG) \
$(SVN_WITH_HTTPD) \
$(SVN_WITH_SASL) \
--with-serf="$(PREFIX)/serf" \
--with-sqlite="$(PREFIX)/sqlite" \
--with-zlib="/usr" \
--without-gnome-keyring \
--with-berkeley-db="$(BDB_FLAG)" \
--with-ruby-sitedir="$(SVN_PREFIX)/lib/ruby/site_ruby" \
--with-py3c="$(SRCDIR)/py3c-${PY3C_VER}" \
--disable-mod-activation \
--with-boost=no \
$(JAVAHL_FLAG) \
$(LIBMAGIC_FLAG) \
$(LZ4_FLAG) \
$(UTF8PROC_FLAG) \
$(SWIG_OLD_FLAG) \
$(SVN_STATIC_FLAG) \
$(DISABLE_NEON_VERSION_CHECK)
touch $@
# compile svn
$(SVN_OBJDIR)/.compiled: $(SVN_OBJDIR)/.configured
cd $(svn_builddir) \
&& env MAKEFLAGS= make -j${MAKE_JOBS} EXTRA_CFLAGS="$(PROFILE_CFLAGS) $(W_NO_SYSTEM_HEADERS)"
touch $@
# install svn
$(SVN_OBJDIR)/.installed: $(SVN_OBJDIR)/.compiled
cd $(svn_builddir) \
&& env MAKEFLAGS= make install install-tools
touch $@
# SWIG 1.x and 2.x are not compatible. If SWIG 2.x is used to generated .swg
# files and 1.x is used to build the bindings, the Python bindings fail to
# load with errors such as "undefined symbol 'SWIG_Python_str_AsChar'".
# So clean any pre-generated .swg files to make sure everything is done
# by the same version of SWIG.
$(SVN_OBJDIR)/.pre-generated-swig-cleaned:
-cd $(svn_builddir) \
&& env MAKEFLAGS= make clean-swig
touch $@
# On OpenBSD, Perl's LDDLFLAGS include -L/usr/local/lib, which can cause
# us to link Perl bindings against the wrong set of SVN libraries.
# We manually fix up the generated Makefile.PL to work around this issue.
ifeq ($(UNAME),OpenBSD)
MAKEFILE_PL_LDDLFLAGS_HACK= sed -i 's@^WriteMakefile@$$config{LDDLFLAGS} =~ s+-L/usr/local/lib++; WriteMakefile@' \
$(SVN_SRCDIR)/subversion/bindings/swig/perl/native/Makefile.PL
else
MAKEFILE_PL_LDDLFLAGS_HACK=true
endif
$(SVN_OBJDIR)/.bindings-compiled: $(SVN_OBJDIR)/.installed $(SVN_OBJDIR)/.pre-generated-swig-cleaned
cd $(svn_builddir) \
&& env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \
env MAKEFLAGS= make -j${MAKE_JOBS} swig-py
cd $(svn_builddir) && \
env PATH=$(PREFIX)/ruby/bin:$$PATH \
LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) env MAKEFLAGS= make -j${MAKE_JOBS} swig-rb
if [ $(ENABLE_PERL_BINDINGS) = yes ]; then \
cd $(svn_builddir) && make $(SVN_SRCDIR)/subversion/bindings/swig/perl/native/Makefile.PL; \
$(MAKEFILE_PL_LDDLFLAGS_HACK); \
cd $(svn_builddir) \
&& env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \
env MAKEFLAGS= make -j${MAKE_JOBS} swig-pl; \
fi
if [ $(ENABLE_JAVA_BINDINGS) = yes ]; then \
cd $(svn_builddir) \
&& env MAKEFLAGS= make javahl; \
fi
touch $@
$(SVN_OBJDIR)/.bindings-installed: $(SVN_OBJDIR)/.bindings-compiled
cd $(svn_builddir) \
&& env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \
env MAKEFLAGS= make install-swig-py
cd $(svn_builddir) && \
env PATH=$(PREFIX)/ruby/bin:$$PATH \
LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) MAKEFLAGS= make install-swig-rb
if [ $(ENABLE_PERL_BINDINGS) = yes ]; then \
cd $(svn_builddir) \
&& env MAKEFLAGS= LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \
make install-swig-pl-lib; \
cd subversion/bindings/swig/perl/native \
&& perl Makefile.PL PREFIX="$(SVN_PREFIX)" \
&& env MAKEFLAGS= LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \
make install; \
fi
if [ $(ENABLE_JAVA_BINDINGS) = yes ]; then \
cd $(svn_builddir) \
&& env MAKEFLAGS= make install-javahl; \
fi
touch $@
# run svn regression tests
HTTPD_CHECK_CONF=$(PREFIX)/httpd/conf/httpd-svn-check-$(WC).conf
HTTPD_PROXY_CONF=$(PREFIX)/httpd/conf/httpd-svn-proxy-$(WC).conf
HTTPD_CHECK_USERS=$(PREFIX)/httpd/conf/httpd-svn-check-users
HTTPD_CHECK_GROUPS=$(PREFIX)/httpd/conf/httpd-svn-check-groups
HTTPD_CHECK_PORT=8081
HTTPD_PROXY_PORT=8082
MOD_DONTDOTHAT_CONF=$(PREFIX)/httpd/conf/dontdothat
$(MOD_DONTDOTHAT_CONF):
mkdir -p $(dir $@)
echo > $@.tmp '[recursive-actions]'
echo >>$@.tmp '/ = deny'
mv -f $@.tmp $@
$(HTTPD_CHECK_GROUPS):
mkdir -p $(dir $@)
printf "random: jrandom\nconstant: jconstant\n" > $@
$(HTTPD_CHECK_CONF): $(MOD_DONTDOTHAT_CONF) $(HTTPD_CHECK_GROUPS)
mkdir -p $(dir $@)
env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) $(PREFIX)/httpd/bin/htpasswd -bc $(HTTPD_CHECK_USERS).tmp jrandom rayjandom
env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) $(PREFIX)/httpd/bin/htpasswd -b $(HTTPD_CHECK_USERS).tmp jconstant rayjandom
env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) $(PREFIX)/httpd/bin/htpasswd -b $(HTTPD_CHECK_USERS).tmp __dumpster__ __loadster__
env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) $(PREFIX)/httpd/bin/htpasswd -b $(HTTPD_CHECK_USERS).tmp JRANDOM rayjandom
env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) $(PREFIX)/httpd/bin/htpasswd -b $(HTTPD_CHECK_USERS).tmp JCONSTANT rayjandom
mv -f $(HTTPD_CHECK_USERS).tmp $(HTTPD_CHECK_USERS)
echo > $@.tmp '# httpd config for make check'
echo >>$@.tmp 'ServerRoot "$(PREFIX)/httpd"'
echo >>$@.tmp 'Listen localhost:$(HTTPD_CHECK_PORT)'
echo >>$@.tmp 'LogLevel warn'
echo >>$@.tmp 'LoadModule unixd_module modules/mod_unixd.so'
echo >>$@.tmp 'LoadModule alias_module modules/mod_alias.so'
echo >>$@.tmp 'LoadModule access_compat_module modules/mod_access_compat.so'
echo >>$@.tmp 'LoadModule authn_core_module modules/mod_authn_core.so'
echo >>$@.tmp 'LoadModule authn_file_module modules/mod_authn_file.so'
echo >>$@.tmp 'LoadModule authz_core_module modules/mod_authz_core.so'
echo >>$@.tmp 'LoadModule authz_user_module modules/mod_authz_user.so'
echo >>$@.tmp 'LoadModule authz_groupfile_module modules/mod_authz_groupfile.so'
echo >>$@.tmp 'LoadModule auth_basic_module modules/mod_auth_basic.so'
echo >>$@.tmp 'LoadModule dav_module modules/mod_dav.so'
echo >>$@.tmp 'LoadModule dav_svn_module $(MOD_DAV_SVN)'
echo >>$@.tmp 'LoadModule authz_svn_module $(MOD_AUTHZ_SVN)'
echo >>$@.tmp 'LoadModule dontdothat_module $(MOD_DONTDOTHAT)'
echo >>$@.tmp 'DocumentRoot "$(PREFIX)/httpd/htdocs"'
echo >>$@.tmp '# These two Locations are used for "make check"'
echo >>$@.tmp ''
echo >>$@.tmp ' Options FollowSymLinks'
echo >>$@.tmp ' AllowOverride None'
echo >>$@.tmp ' Require all granted'
echo >>$@.tmp ''
echo >>$@.tmp ''
echo >>$@.tmp ' DAV svn'
echo >>$@.tmp ' SVNParentPath $(SVN_WC)/subversion/tests/cmdline/svn-test-work/repositories'
echo >>$@.tmp ' AuthzSVNAccessFile $(SVN_WC)/subversion/tests/cmdline/svn-test-work/authz'
echo >>$@.tmp ' AuthType Basic'
echo >>$@.tmp ' AuthName "Subversion Repository"'
echo >>$@.tmp ' AuthUserFile $(HTTPD_CHECK_USERS)'
echo >>$@.tmp ' Require valid-user'
ifeq ($(USE_HTTPV1),yes)
echo >>$@.tmp ' SVNAdvertiseV2Protocol off'
endif
ifeq ($(USE_AUTHZ_SHORT_CIRCUIT),yes)
echo >>$@.tmp ' SVNPathAuthz short_circuit'
endif
echo >>$@.tmp ''
echo >>$@.tmp ''
echo >>$@.tmp ' DAV svn'
echo >>$@.tmp ' SVNPath $(SVN_WC)/subversion/tests/cmdline/svn-test-work/local_tmp/repos'
echo >>$@.tmp ' AuthzSVNAccessFile $(SVN_WC)/subversion/tests/cmdline/svn-test-work/authz'
echo >>$@.tmp ' AuthType Basic'
echo >>$@.tmp ' AuthName "Subversion Repository"'
echo >>$@.tmp ' AuthUserFile $(HTTPD_CHECK_USERS)'
echo >>$@.tmp ' Require valid-user'
ifeq ($(USE_HTTPV1),yes)
echo >>$@.tmp ' SVNAdvertiseV2Protocol off'
endif
ifeq ($(USE_AUTHZ_SHORT_CIRCUIT),yes)
echo >>$@.tmp ' SVNPathAuthz short_circuit'
endif
echo >>$@.tmp ''
echo >>$@.tmp ''
echo >>$@.tmp ' DAV svn'
echo >>$@.tmp ' SVNPath $(SVN_WC)/subversion/tests/cmdline/svn-test-work/local_tmp/trojan'
echo >>$@.tmp ' AuthzSVNAccessFile $(SVN_WC)/subversion/tests/cmdline/svn-test-work/authz'
echo >>$@.tmp ' AuthType Basic'
echo >>$@.tmp ' AuthName "Subversion Repository"'
echo >>$@.tmp ' AuthUserFile $(HTTPD_CHECK_USERS)'
echo >>$@.tmp ' Require valid-user'
ifeq ($(USE_HTTPV1),yes)
echo >>$@.tmp ' SVNAdvertiseV2Protocol off'
endif
ifeq ($(USE_AUTHZ_SHORT_CIRCUIT),yes)
echo >>$@.tmp ' SVNPathAuthz short_circuit'
endif
echo >>$@.tmp ''
echo >>$@.tmp '# This Location lets you access repositories dropped in /tmp/'
echo >>$@.tmp ''
echo >>$@.tmp ' DAV svn'
echo >>$@.tmp ' SVNParentPath /tmp'
echo >>$@.tmp ' Require all granted'
echo >>$@.tmp ' #AuthType Basic'
echo >>$@.tmp ' #AuthName "Subversion Repository"'
echo >>$@.tmp ' #AuthUserFile $(HTTPD_CHECK_USERS)'
echo >>$@.tmp ' #Require valid-user'
ifeq ($(USE_HTTPV1),yes)
echo >> $@.tmp ' SVNAdvertiseV2Protocol off'
endif
ifeq ($(USE_AUTHZ_SHORT_CIRCUIT),yes)
echo >> $@.tmp ' SVNPathAuthz short_circuit'
endif
echo >>$@.tmp ''
echo >>$@.tmp '# Location for tests using mod_dontdothat'
echo >>$@.tmp ''
echo >> $@.tmp 'DAV svn'
echo >> $@.tmp 'SVNParentPath $(SVN_WC)/subversion/tests/cmdline/svn-test-work/repositories'
echo >> $@.tmp 'AuthzSVNAccessFile $(SVN_WC)/subversion/tests/cmdline/svn-test-work/authz'
echo >> $@.tmp 'AuthType Basic'
echo >> $@.tmp 'AuthName "Subversion Repository"'
echo >> $@.tmp 'AuthzSVNAccessFile $(SVN_WC)/subversion/tests/cmdline/svn-test-work/authz'
echo >> $@.tmp 'AuthUserFile $(HTTPD_CHECK_USERS)'
echo >> $@.tmp 'Require valid-user'
ifeq ($(USE_HTTPV1),yes)
echo >> $@.tmp ' SVNAdvertiseV2Protocol off'
endif
echo >> $@.tmp 'DontDoThatConfigFile "$(MOD_DONTDOTHAT_CONF)"'
echo >> $@.tmp ''
echo >>$@.tmp '# Several locations for mod_authz_svn test follow'
echo >>$@.tmp ''
echo >>$@.tmp ' DAV svn'
echo >>$@.tmp ' SVNParentPath $(SVN_WC)/subversion/tests/cmdline/svn-test-work/local_tmp'
echo >>$@.tmp ' AuthzSVNAccessFile $(SVN_WC)/subversion/tests/cmdline/svn-test-work/authz'
ifeq ($(USE_HTTPV1),yes)
echo >>$@.tmp ' SVNAdvertiseV2Protocol off'
endif
echo >>$@.tmp ' SVNListParentPath On'
echo >>$@.tmp ' '
echo >>$@.tmp ' Require all granted'
echo >>$@.tmp ' '
echo >>$@.tmp ' '
echo >>$@.tmp ' Requite all granted'
echo >>$@.tmp ' '
ifeq ($(USE_AUTHZ_SHORT_CIRCUIT),yes)
echo >>$@.tmp ' SVNPathAuthz short_circuit'
endif
echo >>$@.tmp ''
echo >>$@.tmp ''
echo >>$@.tmp ' DAV svn'
echo >>$@.tmp ' SVNParentPath $(SVN_WC)/subversion/tests/cmdline/svn-test-work/repositories'
echo >>$@.tmp ' AuthzSVNReposRelativeAccessFile "^/authz"'
echo >>$@.tmp ' AuthType Basic'
echo >>$@.tmp ' AuthName "Subversion Repository"'
echo >>$@.tmp ' AuthUserFile $(HTTPD_CHECK_USERS)'
echo >>$@.tmp ' Require valid-user'
ifeq ($(USE_HTTPV1),yes)
echo >>$@.tmp ' SVNAdvertiseV2Protocol off'
endif
ifeq ($(USE_AUTHZ_SHORT_CIRCUIT),yes)
echo >>$@.tmp ' SVNPathAuthz short_circuit'
endif
echo >>$@.tmp ''
echo >>$@.tmp ''
echo >>$@.tmp ' DAV svn'
echo >>$@.tmp ' SVNParentPath $(SVN_WC)/subversion/tests/cmdline/svn-test-work/local_tmp'
echo >>$@.tmp ' AuthzSVNAccessFile $(SVN_WC)/subversion/tests/cmdline/svn-test-work/authz'
ifeq ($(USE_HTTPV1),yes)
echo >>$@.tmp ' SVNAdvertiseV2Protocol off'
endif
echo >>$@.tmp ' SVNListParentPath On'
echo >>$@.tmp ' AuthType Basic'
echo >>$@.tmp ' AuthName "Subversion Repository"'
echo >>$@.tmp ' AuthUserFile $(HTTPD_CHECK_USERS)'
echo >>$@.tmp ' Require valid-user'
echo >>$@.tmp ' Satisfy Any'
ifeq ($(USE_AUTHZ_SHORT_CIRCUIT),yes)
echo >>$@.tmp ' SVNPathAuthz short_circuit'
endif
echo >>$@.tmp ''
echo >>$@.tmp ''
echo >>$@.tmp ' DAV svn'
echo >>$@.tmp ' SVNParentPath $(SVN_WC)/subversion/tests/cmdline/svn-test-work/local_tmp'
echo >>$@.tmp ' AuthzSVNAccessFile $(SVN_WC)/subversion/tests/cmdline/svn-test-work/authz'
ifeq ($(USE_HTTPV1),yes)
echo >>$@.tmp ' SVNAdvertiseV2Protocol off'
endif
echo >>$@.tmp ' SVNListParentPath On'
echo >>$@.tmp ' AuthType Basic'
echo >>$@.tmp ' AuthName "Subversion Repository"'
echo >>$@.tmp ' AuthUserFile $(HTTPD_CHECK_USERS)'
echo >>$@.tmp ' Require valid-user'
echo >>$@.tmp ' AuthzSVNNoAuthWhenAnonymousAllowed On'
echo >>$@.tmp ' SVNPathAuthz On'
ifeq ($(USE_AUTHZ_SHORT_CIRCUIT),yes)
echo >>$@.tmp ' SVNPathAuthz short_circuit'
endif
echo >>$@.tmp ''
echo >>$@.tmp ''
echo >>$@.tmp ' DAV svn'
echo >>$@.tmp ' SVNParentPath $(SVN_WC)/subversion/tests/cmdline/svn-test-work/local_tmp'
echo >>$@.tmp ' AuthzSVNAccessFile $(SVN_WC)/subversion/tests/cmdline/svn-test-work/authz'
ifeq ($(USE_HTTPV1),yes)
echo >>$@.tmp ' SVNAdvertiseV2Protocol off'
endif
echo >>$@.tmp ' SVNListParentPath On'
echo >>$@.tmp ' AuthType Basic'
echo >>$@.tmp ' AuthName "Subversion Repository"'
echo >>$@.tmp ' AuthUserFile $(HTTPD_CHECK_USERS)'
echo >>$@.tmp ' Require valid-user'
ifeq ($(USE_AUTHZ_SHORT_CIRCUIT),yes)
echo >>$@.tmp ' SVNPathAuthz short_circuit'
endif
echo >>$@.tmp ''
echo >>$@.tmp ''
echo >>$@.tmp ' DAV svn'
echo >>$@.tmp ' SVNParentPath $(SVN_WC)/subversion/tests/cmdline/svn-test-work/local_tmp'
echo >>$@.tmp ' AuthzSVNAccessFile $(SVN_WC)/subversion/tests/cmdline/svn-test-work/authz'
ifeq ($(USE_HTTPV1),yes)
echo >>$@.tmp ' SVNAdvertiseV2Protocol off'
endif
echo >>$@.tmp ' SVNListParentPath On'
echo >>$@.tmp ' AuthType Basic'
echo >>$@.tmp ' AuthName "Subversion Repository"'
echo >>$@.tmp ' AuthUserFile $(HTTPD_CHECK_USERS)'
echo >>$@.tmp ' Require valid-user'
echo >>$@.tmp ' AuthzSVNAnonymous Off'
echo >>$@.tmp ' SVNPathAuthz On'
echo >>$@.tmp ''
echo >>$@.tmp ''
echo >>$@.tmp ' DAV svn'
echo >>$@.tmp ' SVNParentPath $(SVN_WC)/subversion/tests/cmdline/svn-test-work/local_tmp'
echo >>$@.tmp ' AuthzSVNAccessFile $(SVN_WC)/subversion/tests/cmdline/svn-test-work/authz'
ifeq ($(USE_HTTPV1),yes)
echo >>$@.tmp ' SVNAdvertiseV2Protocol off'
endif
echo >>$@.tmp ' SVNListParentPath On'
echo >>$@.tmp ' AuthType Basic'
echo >>$@.tmp ' AuthName "Subversion Repository"'
echo >>$@.tmp ' AuthUserFile $(HTTPD_CHECK_USERS)'
echo >>$@.tmp ' Require valid-user'
echo >>$@.tmp ' AuthzForceUsernameCase Lower'
ifeq ($(USE_AUTHZ_SHORT_CIRCUIT),yes)
echo >>$@.tmp ' SVNPathAuthz short_circuit'
endif
echo >>$@.tmp ''
echo >>$@.tmp ''
echo >>$@.tmp ' DAV svn'
echo >>$@.tmp ' SVNParentPath $(SVN_WC)/subversion/tests/cmdline/svn-test-work/local_tmp'
echo >>$@.tmp ' AuthzSVNAccessFile $(SVN_WC)/subversion/tests/cmdline/svn-test-work/authz'
ifeq ($(USE_HTTPV1),yes)
echo >>$@.tmp ' SVNAdvertiseV2Protocol off'
endif
echo >>$@.tmp ' SVNListParentPath On'
echo >>$@.tmp ' AuthType Basic'
echo >>$@.tmp ' AuthName "Subversion Repository"'
echo >>$@.tmp ' AuthUserFile $(HTTPD_CHECK_USERS)'
echo >>$@.tmp ' AuthGroupFile $(HTTPD_CHECK_GROUPS)'
echo >>$@.tmp ' Require group random'
echo >>$@.tmp ' AuthzSVNAuthoritative Off'
echo >>$@.tmp ' SVNPathAuthz On'
echo >>$@.tmp ''
echo >>$@.tmp ''
echo >>$@.tmp ' '
echo >>$@.tmp ' DAV svn'
echo >>$@.tmp ' SVNParentPath $(SVN_WC)/subversion/tests/cmdline/svn-test-work/local_tmp'
echo >>$@.tmp ' AuthzSVNAccessFile $(SVN_WC)/subversion/tests/cmdline/svn-test-work/authz'
ifeq ($(USE_HTTPV1),yes)
echo >>$@.tmp ' SVNAdvertiseV2Protocol off'
endif
echo >>$@.tmp ' SVNListParentPath On'
echo >>$@.tmp ' AuthType Basic'
echo >>$@.tmp ' AuthName "Subversion Repository"'
echo >>$@.tmp ' AuthUserFile $(HTTPD_CHECK_USERS)'
echo >>$@.tmp ' AuthzSendForbiddenOnFailure On'
echo >>$@.tmp ' Satisfy All'
echo >>$@.tmp ' '
echo >>$@.tmp ' Require valid-user'
echo >>$@.tmp ' Require expr req("ALLOW") == "1"'
echo >>$@.tmp ' '
ifeq ($(USE_AUTHZ_SHORT_CIRCUIT),yes)
echo >>$@.tmp ' SVNPathAuthz short_circuit'
endif
echo >>$@.tmp ' '
echo >>$@.tmp ' '
echo >>$@.tmp ' DAV svn'
echo >>$@.tmp ' SVNParentPath $(SVN_WC)/subversion/tests/cmdline/svn-test-work/local_tmp'
echo >>$@.tmp ' AuthzSVNAccessFile $(SVN_WC)/subversion/tests/cmdline/svn-test-work/authz'
ifeq ($(USE_HTTPV1),yes)
echo >>$@.tmp ' SVNAdvertiseV2Protocol off'
endif
echo >>$@.tmp ' SVNListParentPath On'
echo >>$@.tmp ' AuthType Basic'
echo >>$@.tmp ' AuthName "Subversion Repository"'
echo >>$@.tmp ' AuthUserFile $(HTTPD_CHECK_USERS)'
echo >>$@.tmp ' AuthzSendForbiddenOnFailure On'
echo >>$@.tmp ' Satisfy All'
echo >>$@.tmp ' '
echo >>$@.tmp ' Require valid-user'
echo >>$@.tmp ' Require expr req("ALLOW") == "1"'
echo >>$@.tmp ' '
ifeq ($(USE_AUTHZ_SHORT_CIRCUIT),yes)
echo >>$@.tmp ' SVNPathAuthz short_circuit'
endif
echo >>$@.tmp ' '
echo >>$@.tmp ''
echo >>$@.tmp 'RedirectMatch permanent ^/svn-test-work/repositories/REDIRECT-PERM-(.*)$$ /svn-test-work/repositories/$$1'
echo >>$@.tmp 'RedirectMatch ^/svn-test-work/repositories/REDIRECT-TEMP-(.*)$$ /svn-test-work/repositories/$$1'
echo >>$@.tmp 'IncludeOptional "conf/$(SVN_REL_WC)*-custom.conf"'
echo >> $@.tmp '#SVNInMemoryCacheSize 0'
echo >> $@.tmp '#SVNCacheTextDeltas Off'
echo >> $@.tmp '#SVNCacheRevProps Off'
mv -f $@.tmp $@
$(HTTPD_PROXY_CONF): $(HTTPD_CHECK_CONF)
mkdir -p $(dir $@)
echo > $@.tmp '# httpd config for a write-through proxy'
echo >>$@.tmp 'ServerRoot "$(PREFIX)/httpd"'
echo >>$@.tmp 'Listen localhost:$(HTTPD_PROXY_PORT)'
echo >>$@.tmp 'LoadModule unixd_module modules/mod_unixd.so'
echo >>$@.tmp 'LoadModule alias_module modules/mod_alias.so'
echo >>$@.tmp 'LoadModule access_compat_module modules/mod_access_compat.so'
echo >>$@.tmp 'LoadModule authn_core_module modules/mod_authn_core.so'
echo >>$@.tmp 'LoadModule authn_file_module modules/mod_authn_file.so'
echo >>$@.tmp 'LoadModule authz_core_module modules/mod_authz_core.so'
echo >>$@.tmp 'LoadModule authz_user_module modules/mod_authz_user.so'
echo >>$@.tmp 'LoadModule authz_groupfile_module modules/mod_authz_groupfile.so'
echo >>$@.tmp 'LoadModule auth_basic_module modules/mod_auth_basic.so'
echo >>$@.tmp 'LoadModule dav_module modules/mod_dav.so'
echo >>$@.tmp 'LoadModule dav_svn_module $(MOD_DAV_SVN)'
echo >>$@.tmp 'LoadModule authz_svn_module $(MOD_AUTHZ_SVN)'
echo >>$@.tmp 'LoadModule dontdothat_module $(MOD_DONTDOTHAT)'
echo >>$@.tmp 'DocumentRoot "$(PREFIX)/httpd/htdocs"'
echo >>$@.tmp '# This Location lets you access repositories dropped in /tmp/svn-$(BRANCH)-proxy'
echo >>$@.tmp ''
echo >>$@.tmp ' DAV svn'
echo >>$@.tmp ' SVNParentPath /tmp/svn-$(BRANCH)-proxy'
echo >>$@.tmp ' SVNMasterURI http://localhost:$(HTTPD_CHECK_PORT)/svn/'
echo >>$@.tmp ' Requite all granted'
echo >>$@.tmp ' #AuthType Basic'
echo >>$@.tmp ' #AuthName "Subversion Repository"'
echo >>$@.tmp ' #AuthUserFile $(HTTPD_CHECK_USERS)'
echo >>$@.tmp ' #Require valid-user'
ifeq ($(USE_HTTPV1),yes)
echo >> $@.tmp ' SVNAdvertiseV2Protocol off'
endif
ifeq ($(USE_AUTHZ_SHORT_CIRCUIT),yes)
echo >> $@.tmp ' SVNPathAuthz short_circuit'
endif
echo >>$@.tmp ''
echo >>$@.tmp '# This Location allows repositories to be synced'
echo >>$@.tmp ''
echo >>$@.tmp 'DAV svn'
echo >>$@.tmp 'SVNParentPath /tmp/svn-$(BRANCH)-proxy'
echo >>$@.tmp 'Require all granted'
echo >>$@.tmp ''
mv -f $@.tmp $@
.PHONY: libpath
libpath:
@echo export LD_LIBRARY_PATH="$(LD_LIBRARY_PATH):$$LD_LIBRARY_PATH" \
"PYTHONPATH=$(SVN_PREFIX)/lib/svn-python"
#
# OpenBSD requires an LD_PRELOAD hack to dlopen() libraries linked to
# libpthread (e.g. libsvn_auth_gnome_keyring.so) into executables that
# aren't linked to libpthread.
ifeq ($(UNAME),OpenBSD)
LIB_PTHREAD_HACK=LD_PRELOAD=libpthread.so
endif
.PHONY: start-svnserve stop-svnserve start-httpd stop-httpd
HTTPD_CMD = env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) $(LIB_PTHREAD_HACK) \
$(PREFIX)/httpd/bin/apachectl
HTTPD_LOG_ROTATE = mv $(PREFIX)/httpd/logs/error_log $(PREFIX)/httpd/logs/error_log.old
HTTPD_START_CMD = $(HTTPD_CMD) -f $(HTTPD_CHECK_CONF) -k start
HTTPD_START_CMD_PROXY = $(HTTPD_CMD) -f $(HTTPD_PROXY_CONF)
HTTPD_START_CMD_DEBUG = $(HTTPD_START_CMD) -X
HTTPD_STOP_CMD = $(HTTPD_CMD) -f $(HTTPD_CHECK_CONF) -k stop; sleep 3
SVNSERVE_START_CMD = (test -e $(PWD)/svnserve-*.pid && \
ls $(PWD)/svnserve-*.pid | while read pidfile; do \
kill `cat "$$pidfile"`; sleep 3; \
rm -f $$pidfile; \
done); \
$(SVN_PREFIX)/bin/svnserve \
--listen-host 127.0.0.1 \
--pid-file $(PWD)/svnserve-$(WC).pid \
-d -r $(svn_builddir)/subversion/tests/cmdline
SVNSERVE_STOP_CMD = kill `cat $(PWD)/svnserve-$(WC).pid`; sleep 3; \
rm -f $(PWD)/svnserve-$(WC).pid
start-httpd: $(HTTPD_CHECK_CONF)
-$(HTTPD_LOG_ROTATE)
$(HTTPD_START_CMD)
@echo "To run tests over http, run:"
@echo " make check BASE_URL=http://localhost:$(HTTPD_CHECK_PORT)"
@echo "The URL http://localhost:$(HTTPD_CHECK_PORT)/svn/"
@echo "lets you access repositories dropped into /tmp"
start-httpd-debug: $(HTTPD_CHECK_CONF)
$(HTTPD_START_CMD_DEBUG) &
@echo "To run tests over http, run:"
@echo " make check BASE_URL=http://localhost:$(HTTPD_CHECK_PORT)"
@echo "The URL http://localhost:$(HTTPD_CHECK_PORT)/svn/"
@echo "lets you access repositories dropped into /tmp"
@echo "Trying to attach gdb to httpd..."
@sleep 1
gdb $(PREFIX)/httpd/bin/httpd `cat $(PREFIX)/httpd/logs/httpd.pid`
start-httpd-proxy: $(HTTPD_PROXY_CONF)
$(HTTPD_START_CMD_PROXY)
@echo "The URL http://localhost:$(HTTPD_PROXY_PORT)/svn/"
@echo "lets you access repositories dropped into /tmp/svn-$(BRANCH)-proxy"
stop-httpd: $(HTTPD_CHECK_CONF)
$(HTTPD_STOP_CMD)
stop-httpd-proxy: $(HTTPD_PROXY_CONF)
pkill -f '$(PREFIX)/httpd/bin/httpd -f $(HTTPD_PROXY_CONF)'
start-svnserve: $(SVN_OBJDIR)/.compiled
$(SVNSERVE_START_CMD)
stop-svnserve:
$(SVNSERVE_STOP_CMD)
define do_check
-cd $(svn_builddir) && for fs in $(SVN_CHECK_FS_BACKENDS); do \
echo "Begin test: $(subst svn-check-,,$@) x $$fs"; \
test -d "$(RAMDISK)/tmp" && export TMPDIR="$(RAMDISK)/tmp"; \
env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) $(LIB_PTHREAD_HACK) \
env MAKEFLAGS= make check PARALLEL=$(PARALLEL) CLEANUP=$(CLEANUP) \
EXCLUSIVE_WC_LOCKS=$(EXCLUSIVE_WC_LOCKS) \
THREADED=$(THREADED) \
SVN_BIN_DIR=$(SVN_PREFIX)/bin \
MEMCACHED_SERVER=$(MEMCACHED_SERVER) $1 FS_TYPE=$$fs; \
for log in tests.log fails.log; do \
test -f $$log && mv -f $$log $$log.$@-$$fs; \
done; \
done
endef
TEST_WORK=$(svn_builddir)/subversion/tests/cmdline/svn-test-work
svn-check-prepare-ramdisk:
-rm -rf "$(TEST_WORK)"; \
if [ -d "$(RAMDISK)" ] && \
touch "$(RAMDISK)/$(SVN_REL_WC).writetest" && \
mkdir -p "$(RAMDISK)/$(SVN_REL_WC)"; then \
rm -f "$(RAMDISK)/$(SVN_REL_WC).writetest"; \
ln -s "$(RAMDISK)/$(SVN_REL_WC)" "$(TEST_WORK)"; \
mkdir -p "$(RAMDISK)/tmp"; \
fi
ifndef NEON_FLAG
svn-check-neon:
@echo Neon is not supported by this build of Subversion, skipping tests
@true
else
svn-check-neon: $(HTTPD_CHECK_CONF) $(SVN_OBJDIR)/.compiled $(SVN_OBJDIR)/.bindings-compiled svn-check-prepare-ramdisk
$(HTTPD_START_CMD)
$(call do_check,BASE_URL=http://localhost:$(HTTPD_CHECK_PORT) HTTP_LIBRARY=neon)
$(HTTPD_STOP_CMD)
endif
svn-check-serf: $(HTTPD_CHECK_CONF) $(SVN_OBJDIR)/.compiled $(SVN_OBJDIR)/.bindings-compiled svn-check-prepare-ramdisk
$(HTTPD_START_CMD)
$(call do_check,BASE_URL=http://localhost:$(HTTPD_CHECK_PORT) HTTP_LIBRARY=serf)
$(HTTPD_STOP_CMD)
svn-check-local: svn-check-prepare-ramdisk
$(call do_check)
svn-check-svn: svn-check-prepare-ramdisk
$(SVNSERVE_START_CMD)
$(call do_check,BASE_URL=svn://127.0.0.1)
$(SVNSERVE_STOP_CMD)
.PHONY: svn-check-swig-pl svn-check-swig-py svn-check-swig-rb svn-check-javahl
svn-check-bindings: svn-check-swig-pl svn-check-swig-py svn-check-swig-rb \
svn-check-javahl
RUBYLIB=$(SVN_PREFIX)/lib/ruby/site_ruby$(shell grep \
^svn_cv_ruby_sitedir_archsuffix $(svn_builddir)/config.log | \
cut -d'=' -f2):$(SVN_PREFIX)/lib/ruby/site_ruby$(shell \
grep ^svn_cv_ruby_sitedir_libsuffix $(svn_builddir)/config.log | \
cut -d'=' -f2)
svn-check-swig-pl:
-if [ $(ENABLE_PERL_BINDINGS) = yes ]; then \
(cd $(svn_builddir) && \
env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \
$(LIB_PTHREAD_HACK) \
env MAKEFLAGS= make check-swig-pl 2>&1) | \
tee $(svn_builddir)/tests.log.bindings.pl; \
fi
svn-check-swig-py:
-(cd $(svn_builddir) && \
env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \
env MAKEFLAGS= make check-swig-py 2>&1) | \
tee $(svn_builddir)/tests.log.bindings.py
# We add the svn prefix to PATH here because the ruby tests
# attempt to start an svnserve binary found in PATH.
svn-check-swig-rb:
(cd $(svn_builddir) && \
env RUBYLIB=$(RUBYLIB) \
LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \
PATH=$(SVN_PREFIX)/bin:$$PATH \
$(LIB_PTHREAD_HACK) \
env MAKEFLAGS= make check-swig-rb 2>&1) | \
tee $(svn_builddir)/tests.log.bindings.rb
svn-check-javahl:
-if [ $(ENABLE_JAVA_BINDINGS) = yes ]; then \
ln -s libsvnjavahl-1.so.0.0 $(PREFIX)/svn-$(WC)/lib/libsvnjavahl-1.so; \
(cd $(svn_builddir) && \
env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \
MAKEFLAGS= make $(JAVAHL_CHECK_TARGET) 2>&1) | \
tee $(svn_builddir)/tests.log.bindings.javahl; \
fi
svn-check: svn-check-prepare-ramdisk svn-check-local svn-check-svn \
svn-check-neon svn-check-serf svn-check-bindings
.PHONY: sign-email
ifdef NEON_FLAG
NEON_STR=ra_neon |
NEON_VER_LINE=@echo "neon: $(NEON_VER)"
endif
sign-email:
@echo "Summary: +1 to release"
@echo ""
@echo "Tested: [bdb | fsfs] x [ra_local | ra_svn | $(NEON_STR)ra_serf]"
@echo " swig bindings"
ifeq ($(ENABLE_JAVA_BINDINGS),yes)
@echo " javahl bindings"
endif
@echo ""
@echo "Test results: All passed."
@echo ""
@echo "Platform: `uname -r -s -m`"
@echo ""
@echo "Dependencies:"
@echo "bdb: $(BDB_VER)"
ifeq ($(USE_APR_ICONV),yes)
@echo "apr-iconv: $(APR_ICONV_VER)"
else
@echo "GNU-iconv: $(GNU_ICONV_VER)"
endif
@echo "apr: $(APR_VER)"
@echo "apr-util: $(APR_UTIL_VER)"
@echo "httpd: $(HTTPD_VER)"
$(NEON_VER_LINE)
@echo "serf: $(SERF_VER)"
@echo "cyrus-sasl: $(CYRUS_SASL_VER)"
@echo "sqlite: $(SQLITE_VER)"
ifdef LZ4_FLAG
@echo "lz4: $(LZ4_VER)"
endif
@echo "libssl: `openssl version`"
ifdef SWIG_OLD_FLAG
@echo "swig: `$(PREFIX)/swig-old/bin/swig -version | grep Version | cut -d' ' -f3`"
else
@echo "swig: `swig -version | grep Version | cut -d' ' -f3`"
endif
@echo "python: $(PYTHON_VER)"
@echo "perl: `eval \`perl -V:version\`; echo $$version`"
@echo "ruby: $(RUBY_VER)"
ifeq ($(ENABLE_JAVA_BINDINGS),yes)
@echo "java: `java -version 2>&1 | grep version | cut -d' ' -f3 | sed -e 's/\"//g'`"
endif
@echo ""
@echo "Signatures:"
@echo
@echo "subversion-$(TAG).tar.gz"
@echo "`cat subversion-$(TAG).tar.gz.asc`"
@echo
@echo "subversion-$(TAG).tar.bz2"
@echo "`cat subversion-$(TAG).tar.bz2.asc`"