# vim: noexpandtab tabstop=8 shiftwidth=8 syntax=make # # Licensed to the Apache Software Foundation (ASF) under one # or more contributor license agreements. See the NOTICE file # distributed with this work for additional information # regarding copyright ownership. The ASF licenses this file # to you under the Apache License, Version 2.0 (the # "License"); you may not use this file except in compliance # with the License. You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, # software distributed under the License is distributed on an # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY # KIND, either express or implied. See the License for the # specific language governing permissions and limitations # under the License. # # WARNING: This may or may not work on your system. This Makefile is # an example, rather than a ready-made universal solution. # **************************************************************** # ** IMPORTANT NOTE FOR SVN COMMITTERS: READ THIS. ** # ** ** # **************************************************************** # | This Makefile is used by the bb-openbsd buildbot | # | (http://ci.apache.org/builders/bb-openbsd). Please check | # | the bot's health after making changes to this file. | # |______________________________________________________________| ENABLE_PERL_BINDINGS ?= yes THREADING ?= yes ifeq ($(THREADING),yes) ENABLE_JAVA_BINDINGS ?= yes else ENABLE_JAVA_BINDINGS ?= no endif USE_APR_ICONV ?= no # set to yes to use APR iconv instead of GNU iconv PARALLEL ?= 1 CLEANUP ?= 1 EXCLUSIVE_WC_LOCKS ?= 1 USE_HTTPV1 ?= no USE_AUTHZ_SHORT_CIRCUIT ?= no RAMDISK ?= /ramdisk PWD = $(shell pwd) UNAME = $(shell uname) TAG ?= none ifeq ($(TAG),none) BRANCH ?= trunk else BRANCH = $(TAG) endif WC ?= $(BRANCH) BRANCH_MAJOR = $(shell echo $(BRANCH) | \ sed -e 's/\([0-9]\)\.\([0-9]\)\.[x0-9].*$$/\1.\2/') SVN_REL_WC = svn-$(WC) SVN_WC = $(PWD)/$(SVN_REL_WC) PREFIX = $(PWD)/prefix SVN_PREFIX = $(PREFIX)/svn-$(WC) DISTDIR = $(PWD)/distfiles SRCDIR = $(PWD)/src OBJDIR = $(PWD)/objdir BDB_MAJOR_VER = 4.7 BDB_VER = $(BDB_MAJOR_VER).25 APR_VER = 1.4.8 APR_ICONV_VER = 1.2.1 GNU_ICONV_VER = 1.14 APR_UTIL_VER = 1.4.1 HTTPD_VER = 2.2.26 NEON_VER = 0.29.6 SERF_VER = 1.3.3 SERF_OLD_VER = 0.3.1 CYRUS_SASL_VER = 2.1.25 SQLITE_VER = 3080200 LIBMAGIC_VER = 5.11 RUBY_VER = 1.8.7-p358 BZ2_VER = 1.0.6 PYTHON_VER = 2.7.3 JUNIT_VER = 4.10 BDB_DIST = db-$(BDB_VER).tar.gz APR_ICONV_DIST = apr-iconv-$(APR_ICONV_VER).tar.gz GNU_ICONV_DIST = libiconv-$(GNU_ICONV_VER).tar.gz NEON_DIST = neon-$(NEON_VER).tar.gz SQLITE_DIST = sqlite-autoconf-$(SQLITE_VER).tar.gz CYRUS_SASL_DIST = cyrus-sasl-$(CYRUS_SASL_VER).tar.gz HTTPD_DIST = httpd-$(HTTPD_VER).tar.bz2 LIBMAGIC_DIST = file-$(LIBMAGIC_VER).tar.gz RUBY_DIST = ruby-$(RUBY_VER).tar.gz BZ2_DIST = bzip2-$(BZ2_VER).tar.gz PYTHON_DIST = Python-$(PYTHON_VER).tgz JUNIT_DIST = junit-${JUNIT_VER}.jar DISTFILES = $(DISTDIR)/$(NEON_DIST) \ $(DISTDIR)/$(SERF_DIST) \ $(DISTDIR)/$(SQLITE_DIST) \ $(DISTDIR)/$(HTTPD_DIST) \ $(DISTDIR)/$(APR_ICONV_DIST) \ $(DISTDIR)/$(GNU_ICONV_DIST) \ $(DISTDIR)/$(CYRUS_SASL_DIST) \ $(DISTDIR)/$(LIBMAGIC_DIST) \ $(DISTDIR)/$(RUBY_DIST) \ $(DISTDIR)/$(BZ2_DIST) \ $(DISTDIR)/$(PYTHON_DIST) \ $(DISTDIR)/$(JUNIT_DIST) FETCH_CMD = wget -c SUBVERSION_REPOS_URL = https://svn.apache.org/repos/asf/subversion BDB_URL = http://ftp2.de.freebsd.org/pub/FreeBSD/distfiles/bdb/$(BDB_DIST) APR_URL = http://svn.apache.org/repos/asf/apr/apr APR_ICONV_URL = http://www.apache.org/dist/apr/$(APR_ICONV_DIST) GNU_ICONV_URL = http://ftp.gnu.org/pub/gnu/libiconv/$(GNU_ICONV_DIST) APR_UTIL_URL = http://svn.apache.org/repos/asf/apr/apr-util HTTPD_URL = http://archive.apache.org/dist/httpd/$(HTTPD_DIST) NEON_URL = http://webdav.org/neon/$(NEON_DIST) #SERF_URL = http://serf.googlecode.com/files/$(SERF_DIST) SERF_URL = http://serf.googlecode.com/svn/tags/$(SERF_VER) SERF_OLD_URL = http://serf.googlecode.com/svn/tags/$(SERF_OLD_VER) SQLITE_URL = http://www.sqlite.org/2013/$(SQLITE_DIST) CYRUS_SASL_URL = ftp://ftp.andrew.cmu.edu/pub/cyrus-mail/$(CYRUS_SASL_DIST) LIBMAGIC_URL = ftp://ftp.astron.com/pub/file/$(LIBMAGIC_DIST) RUBY_URL = http://ftp.ruby-lang.org/pub/ruby/1.8/$(RUBY_DIST) BZ2_URL = http://bzip.org/$(BZ2_VER)/$(BZ2_DIST) PYTHON_URL = http://python.org/ftp/python/$(PYTHON_VER)/$(PYTHON_DIST) JUNIT_URL = http://downloads.sourceforge.net/project/junit/junit/$(JUNIT_VER)/$(JUNIT_DIST) BDB_SRCDIR = $(SRCDIR)/db-$(BDB_VER) APR_SRCDIR = $(SRCDIR)/apr-$(APR_VER) APR_ICONV_SRCDIR = $(SRCDIR)/apr-iconv-$(APR_ICONV_VER) GNU_ICONV_SRCDIR = $(SRCDIR)/libiconv-$(GNU_ICONV_VER) APR_UTIL_SRCDIR = $(SRCDIR)/apr-util-$(APR_UTIL_VER) HTTPD_SRCDIR = $(SRCDIR)/httpd-$(HTTPD_VER) NEON_SRCDIR = $(SRCDIR)/neon-$(NEON_VER) SERF_SRCDIR = $(SRCDIR)/serf-$(SERF_VER) SERF_OLD_SRCDIR = $(SRCDIR)/serf-$(SERF_OLD_VER) SQLITE_SRCDIR = $(SRCDIR)/sqlite-autoconf-$(SQLITE_VER) CYRUS_SASL_SRCDIR = $(SRCDIR)/cyrus-sasl-$(CYRUS_SASL_VER) LIBMAGIC_SRCDIR = $(SRCDIR)/file-$(LIBMAGIC_VER) RUBY_SRCDIR = $(SRCDIR)/ruby-$(RUBY_VER) BZ2_SRCDIR = $(SRCDIR)/bzip2-$(BZ2_VER) PYTHON_SRCDIR = $(SRCDIR)/Python-$(PYTHON_VER) SVN_SRCDIR = $(SVN_WC) BDB_OBJDIR = $(OBJDIR)/db-$(BDB_VER) APR_OBJDIR = $(OBJDIR)/apr-$(APR_VER) APR_ICONV_OBJDIR = $(OBJDIR)/apr-iconv-$(APR_ICONV_VER) GNU_ICONV_OBJDIR = $(OBJDIR)/libiconv-$(GNU_ICONV_VER) APR_UTIL_OBJDIR = $(OBJDIR)/apr-util-$(APR_UTIL_VER) HTTPD_OBJDIR = $(OBJDIR)/httpd-$(HTTPD_VER) NEON_OBJDIR = $(OBJDIR)/neon-$(NEON_VER) SERF_OBJDIR = $(OBJDIR)/serf-$(SERF_VER) SERF_OLD_OBJDIR = $(OBJDIR)/serf-$(SERF_OLD_VER) SQLITE_OBJDIR = $(OBJDIR)/sqlite-$(SQLITE_VER) CYRUS_SASL_OBJDIR = $(OBJDIR)/cyrus-sasl-$(CYRUS_SASL_VER) LIBMAGIC_OBJDIR = $(OBJDIR)/file-$(LIBMAGIC_VER) RUBY_OBJDIR = $(OBJDIR)/ruby-$(RUBY_VER) BZ2_OBJDIR = $(OBJDIR)/bzip2-$(BZ2_VER) PYTHON_OBJDIR = $(OBJDIR)/python-$(PYTHON_VER) SVN_OBJDIR = $(OBJDIR)/$(SVN_REL_WC) # Tweak this for out-of-tree builds. Note that running individual # tests in the test suite won't work conveniently with out-of-tree # builds! svn_builddir ?=$(SVN_WC) ifdef PROFILE PROFILE_CFLAGS=-pg endif # We need this to make sure some targets below pick up the right libraries LD_LIBRARY_PATH=$(PREFIX)/apr/lib:$(PREFIX)/iconv/lib:$(PREFIX)/bdb/lib:$(PREFIX)/neon/lib:$(PREFIX)/serf/lib:$(PREFIX)/sqlite/lib:$(PREFIX)/cyrus-sasl/lib:$(PREFIX)/iconv/lib:$(PREFIX)/libmagic/lib:$(PREFIX)/ruby/lib:$(PREFIX)/python/lib:$(PREFIX)/svn-$(WC)/lib ####################################################################### # Main targets. ####################################################################### .PHONY: all reset clean nuke all: dirs-create bdb-install apr-install iconv-install apr-util-install \ httpd-install neon-install serf-install serf-old-install \ sqlite-install cyrus-sasl-install libmagic-install \ ruby-install bz2-install python-install \ svn-install svn-bindings-install # Use these to start a build from the beginning. reset: dirs-reset bdb-reset apr-reset iconv-reset apr-util-reset \ httpd-reset neon-reset serf-reset serf-old-reset sqlite-reset \ cyrus-sasl-reset libmagic-reset ruby-reset python-reset \ bz2-reset svn-reset # Use to save disk space. clean: bdb-clean apr-clean iconv-clean apr-util-clean httpd-clean \ neon-clean serf-clean serf-old-clean sqlite-clean cyrus-sasl-clean \ libmagic-clean ruby-clean bz2-clean python-clean svn-clean # Nukes everything (including installed binaries!) # Use this to start ALL OVER AGAIN! Use with caution! nuke: @echo @echo "I will now remove the following directories PERMANENTLY:" @echo @echo " $(SRCDIR)" @echo " $(OBJDIR)" @echo " $(PREFIX)" @echo @echo -n 'Do you want me to continue? ([no]/yes): ' @read ANSWER ; \ case $$ANSWER in \ yes) echo "You said $$ANSWER. I will continue."; \ echo rm -rf $(SRCDIR) $(OBJDIR) $(PREFIX); \ rm -rf $(SRCDIR) $(OBJDIR) $(PREFIX); \ $(MAKE) reset; \ ;; \ "") echo "You said no."; \ ;; \ *) echo "You said $$ANSWER."; \ ;; \ esac ####################################################################### # directories ####################################################################### dirs-create: $(PWD)/.dirs-created dirs-reset: rm -f $(PWD)/.dirs-created $(PWD)/.dirs-created: $(foreach d, $(PREFIX) $(DISTDIR) $(SRCDIR) $(OBJDIR), \ [ -d $(d) ] || mkdir -p $(d);) touch $@ ####################################################################### # bdb ####################################################################### bdb-retrieve: $(BDB_OBJDIR)/.retrieved bdb-configure: $(BDB_OBJDIR)/.configured bdb-compile: $(BDB_OBJDIR)/.compiled bdb-install: $(BDB_OBJDIR)/.installed bdb-reset: $(foreach f, .retrieved .configured .compiled .installed, \ rm -f $(BDB_OBJDIR)/$(f);) bdb-clean: -(cd $(BDB_SRCDIR)/build_unix/ && env MAKEFLAGS= make clean) # fetch distfile for bdb $(DISTDIR)/$(BDB_DIST): cd $(DISTDIR) && $(FETCH_CMD) $(BDB_URL) # retrieve bdb $(BDB_OBJDIR)/.retrieved: $(DISTDIR)/$(BDB_DIST) [ -d $(BDB_OBJDIR) ] || mkdir -p $(BDB_OBJDIR) tar -C $(SRCDIR) -zxf $(DISTDIR)/$(BDB_DIST) touch $@ # configure bdb $(BDB_OBJDIR)/.configured: $(BDB_OBJDIR)/.retrieved cd $(BDB_SRCDIR)/build_unix \ && env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`" \ ../dist/configure \ --prefix=$(PREFIX)/bdb \ --enable-debug touch $@ # compile bdb $(BDB_OBJDIR)/.compiled: $(BDB_OBJDIR)/.configured (cd $(BDB_SRCDIR)/build_unix && env MAKEFLAGS= make) touch $@ # install bdb $(BDB_OBJDIR)/.installed: $(BDB_OBJDIR)/.compiled (cd $(BDB_SRCDIR)/build_unix && env MAKEFLAGS= make install) touch $@ ####################################################################### # apr ####################################################################### apr-retrieve: $(APR_OBJDIR)/.retrieved apr-configure: $(APR_OBJDIR)/.configured apr-compile: $(APR_OBJDIR)/.compiled apr-install: $(APR_OBJDIR)/.installed apr-reset: $(foreach f, .retrieved .configured .compiled .installed, \ rm -f $(APR_OBJDIR)/$(f);) apr-clean: -(cd $(APR_OBJDIR) && env MAKEFLAGS= make clean) # retrieve apr if not present yet $(APR_OBJDIR)/.retrieved: [ -d $(APR_OBJDIR) ] || mkdir -p $(APR_OBJDIR) if [ ! -d $(APR_SRCDIR) ]; then \ svn export $(APR_URL)/tags/$(APR_VER)/ $(APR_SRCDIR); \ fi touch $@ ifeq ($(THREADING),yes) THREADS_FLAG=--enable-threads else THREADS_FLAG=--disable-threads endif ifdef POOL_DEBUG POOL_DEBUG_FLAG=--enable-pool-debug=all endif # configure apr $(APR_OBJDIR)/.configured: $(APR_OBJDIR)/.retrieved $(BDB_OBJDIR)/.installed cd $(APR_SRCDIR) && ./buildconf cd $(APR_OBJDIR) \ && env CFLAGS="-O0 -g $(PROFILE_CFLAGS)" GREP="`which grep`" \ $(APR_SRCDIR)/configure \ --prefix=$(PREFIX)/apr \ --enable-maintainer-mode \ $(THREADS_FLAG) \ $(POOL_DEBUG_FLAG) touch $@ # compile apr $(APR_OBJDIR)/.compiled: $(APR_OBJDIR)/.configured (cd $(APR_OBJDIR) && env MAKEFLAGS= make) touch $@ # install apr $(APR_OBJDIR)/.installed: $(APR_OBJDIR)/.compiled (cd $(APR_OBJDIR) && env MAKEFLAGS= make install) touch $@ ####################################################################### # apr-iconv ####################################################################### apr-iconv-retrieve: $(APR_ICONV_OBJDIR)/.retrieved apr-iconv-configure: $(APR_ICONV_OBJDIR)/.configured apr-iconv-compile: $(APR_ICONV_OBJDIR)/.compiled apr-iconv-install: $(APR_ICONV_OBJDIR)/.installed apr-iconv-reset: $(foreach f, .retrieved .configured .compiled .installed, \ rm -f $(APR_ICONV_OBJDIR)/$(f);) apr-iconv-clean: -(cd $(APR_ICONV_OBJDIR) && env MAKEFLAGS= make clean) # fetch distfile for apr-iconv $(DISTDIR)/$(APR_ICONV_DIST): cd $(DISTDIR) && $(FETCH_CMD) $(APR_ICONV_URL) # retrieve apr-iconv $(APR_ICONV_OBJDIR)/.retrieved: $(DISTDIR)/$(APR_ICONV_DIST) [ -d $(APR_ICONV_OBJDIR) ] || mkdir -p $(APR_ICONV_OBJDIR) tar -C $(SRCDIR) -zxf $(DISTDIR)/$(APR_ICONV_DIST) touch $@ # configure apr-iconv $(APR_ICONV_OBJDIR)/.configured: $(APR_ICONV_OBJDIR)/.retrieved \ $(APR_OBJDIR)/.installed cd $(APR_ICONV_OBJDIR) \ && env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`" \ $(APR_ICONV_SRCDIR)/configure \ --prefix=$(PREFIX)/apr \ --with-apr=$(PREFIX)/apr touch $@ # compile apr-iconv $(APR_ICONV_OBJDIR)/.compiled: $(APR_ICONV_OBJDIR)/.configured (cd $(APR_ICONV_OBJDIR) \ && env MAKEFLAGS= make CPPFLAGS="-D_OSD_POSIX" CFLAGS="-g -O0 $(PROFILE_CFLAGS)") touch $@ # install apr-iconv $(APR_ICONV_OBJDIR)/.installed: $(APR_ICONV_OBJDIR)/.compiled (cd $(APR_ICONV_OBJDIR) && env MAKEFLAGS= make install) touch $@ ####################################################################### # gnu-iconv ####################################################################### gnu-iconv-retrieve: $(GNU_ICONV_OBJDIR)/.retrieved gnu-iconv-configure: $(GNU_ICONV_OBJDIR)/.configured gnu-iconv-compile: $(GNU_ICONV_OBJDIR)/.compiled gnu-iconv-install: $(GNU_ICONV_OBJDIR)/.installed gnu-iconv-reset: $(foreach f, .retrieved .configured .compiled .installed, \ rm -f $(GNU_ICONV_OBJDIR)/$(f);) gnu-iconv-clean: -(cd $(GNU_ICONV_OBJDIR) && env MAKEFLAGS= make clean) rm -f $(GNU_ICONV_OBJDIR)/lib_encodings.def.diff rm -f $(GNU_ICONV_OBJDIR)/lib_aliases.gperf.diff # fetch distfile for gnu-iconv $(DISTDIR)/$(GNU_ICONV_DIST): cd $(DISTDIR) && $(FETCH_CMD) $(GNU_ICONV_URL) $(GNU_ICONV_OBJDIR)/lib_encodings.def.diff: mkdir -p $(dir $@) echo > $@.tmp '--- lib/encodings.def.orig Wed Oct 24 23:41:41 2007' echo >>$@.tmp '+++ lib/encodings.def Wed Oct 24 23:43:47 2007' echo >>$@.tmp '@@ -37,6 +37,7 @@' echo >>$@.tmp ' ' echo >>$@.tmp ' ' echo >>$@.tmp ' DEFENCODING(( "US-ASCII", /* IANA */' echo >>$@.tmp '+ "646",' echo >>$@.tmp ' "ASCII", /* IANA, JDK 1.1 */' echo >>$@.tmp ' "ISO646-US", /* IANA */' echo >>$@.tmp ' "ISO_646.IRV:1991", /* IANA */' mv -f $@.tmp $@ $(GNU_ICONV_OBJDIR)/lib_aliases.gperf.diff: mkdir -p $(dir $@) echo > $@.tmp '--- lib/aliases.gperf.orig Wed Oct 24 23:41:32 2007' echo >>$@.tmp '+++ lib/aliases.gperf Wed Oct 24 23:47:38 2007' echo >>$@.tmp '@@ -10,6 +10,7 @@ struct alias { int name; unsigned int encoding_index; ' echo >>$@.tmp ' %pic' echo >>$@.tmp ' %%' echo >>$@.tmp ' US-ASCII, ei_ascii' echo >>$@.tmp '+646, ei_ascii' echo >>$@.tmp ' ASCII, ei_ascii' echo >>$@.tmp ' ISO646-US, ei_ascii' echo >>$@.tmp ' ISO_646.IRV:1991, ei_ascii' mv -f $@.tmp $@ # retrieve gnu-iconv # Add 646 as an alias for ASCII to fix prop_test 22 on OpenBSD $(GNU_ICONV_OBJDIR)/.retrieved: $(DISTDIR)/$(GNU_ICONV_DIST) \ $(GNU_ICONV_OBJDIR)/lib_encodings.def.diff \ $(GNU_ICONV_OBJDIR)/lib_aliases.gperf.diff tar -C $(SRCDIR) -zxf $(DISTDIR)/$(GNU_ICONV_DIST) cd $(SRCDIR)/libiconv-$(GNU_ICONV_VER) && \ patch -p0 < $(GNU_ICONV_OBJDIR)/lib_encodings.def.diff && \ patch -p0 < $(GNU_ICONV_OBJDIR)/lib_aliases.gperf.diff touch $@ # configure gnu-iconv $(GNU_ICONV_OBJDIR)/.configured: $(GNU_ICONV_OBJDIR)/.retrieved cd $(SRCDIR)/libiconv-${GNU_ICONV_VER} && \ ${MAKE} -f Makefile.devel lib/aliases.h cd $(GNU_ICONV_OBJDIR) \ && env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`"\ $(GNU_ICONV_SRCDIR)/configure \ --prefix=$(PREFIX)/iconv \ --enable-extra-encodings touch $@ # compile gnu-iconv $(GNU_ICONV_OBJDIR)/.compiled: $(GNU_ICONV_OBJDIR)/.configured (cd $(GNU_ICONV_OBJDIR) && env MAKEFLAGS= make) touch $@ # install gnu-iconv $(GNU_ICONV_OBJDIR)/.installed: $(GNU_ICONV_OBJDIR)/.compiled (cd $(GNU_ICONV_OBJDIR) && env MAKEFLAGS= make install) touch $@ ####################################################################### # iconv ####################################################################### .PHONY: iconv-install iconv-reset iconv-clean ifeq ($(USE_APR_ICONV),yes) iconv-install: apr-iconv-install iconv-reset: apr-iconv-reset iconv-clean: apr-iconv-clean else iconv-install: gnu-iconv-install iconv-reset: gnu-iconv-reset iconv-clean: gnu-iconv-clean endif ####################################################################### # apr-util ####################################################################### apr-util-retrieve: $(APR_UTIL_OBJDIR)/.retrieved apr-util-configure: $(APR_UTIL_OBJDIR)/.configured apr-util-compile: $(APR_UTIL_OBJDIR)/.compiled apr-util-install: $(APR_UTIL_OBJDIR)/.installed apr-util-reset: $(foreach f, .retrieved .configured .compiled .installed, \ rm -f $(APR_UTIL_OBJDIR)/$(f);) apr-util-clean: -(cd $(APR_UTIL_OBJDIR) && env MAKEFLAGS= make clean) # retrieve apr-util if not present yet $(APR_UTIL_OBJDIR)/.retrieved: [ -d $(APR_UTIL_OBJDIR) ] || mkdir -p $(APR_UTIL_OBJDIR) if [ ! -d $(APR_UTIL_SRCDIR) ]; then \ svn export $(APR_UTIL_URL)/tags/$(APR_UTIL_VER)/ \ $(APR_UTIL_SRCDIR); \ fi touch $@ ifeq ($(USE_APR_ICONV),yes) ICONV_FLAG=--with-iconv=$(PREFIX)/apr ICONV_OBJDIR=$(APR_ICONV_OBJDIR) else ICONV_FLAG=--with-iconv=$(PREFIX)/iconv ICONV_OBJDIR=$(GNU_ICONV_OBJDIR) endif # configure apr-util $(APR_UTIL_OBJDIR)/.configured: $(APR_UTIL_OBJDIR)/.retrieved \ $(APR_OBJDIR)/.installed $(ICONV_OBJDIR)/.installed cd $(APR_UTIL_SRCDIR) && ./buildconf --with-apr=$(APR_SRCDIR) cd $(APR_UTIL_OBJDIR) \ && env LD_LIBRARY_PATH=$(PREFIX)/bdb/lib \ CFLAGS="-O0 -g $(PROFILE_CFLAGS)" \ GREP="`which grep`" \ $(APR_UTIL_SRCDIR)/configure \ --prefix=$(PREFIX)/apr \ --enable-maintainer-mode \ --with-apr=$(PREFIX)/apr \ --with-berkeley-db=$(PREFIX)/bdb \ $(ICONV_FLAG) touch $@ # compile apr-util $(APR_UTIL_OBJDIR)/.compiled: $(APR_UTIL_OBJDIR)/.configured (cd $(APR_UTIL_OBJDIR) && env MAKEFLAGS= make) touch $@ # install apr-util $(APR_UTIL_OBJDIR)/.installed: $(APR_UTIL_OBJDIR)/.compiled (cd $(APR_UTIL_OBJDIR) && env MAKEFLAGS= make install) touch $@ ####################################################################### # httpd ####################################################################### HTTPD_CONF= $(PREFIX)/httpd/conf/httpd-$(SVN_REL_WC).conf httpd-retrieve: $(HTTPD_OBJDIR)/.retrieved httpd-configure: $(HTTPD_OBJDIR)/.configured httpd-compile: $(HTTPD_OBJDIR)/.compiled httpd-install: $(HTTPD_OBJDIR)/.installed $(HTTPD_CONF) httpd-reset: $(foreach f, .retrieved .configured .compiled .installed, \ rm -f $(HTTPD_OBJDIR)/$(f);) httpd-clean: -(cd $(HTTPD_OBJDIR) && env MAKEFLAGS= make clean) # fetch distfile for httpd $(DISTDIR)/$(HTTPD_DIST): cd $(DISTDIR) && $(FETCH_CMD) $(HTTPD_URL) # retrieve httpd $(HTTPD_OBJDIR)/.retrieved: $(DISTDIR)/$(HTTPD_DIST) [ -d $(HTTPD_OBJDIR) ] || mkdir -p $(HTTPD_OBJDIR) tar -C $(SRCDIR) -jxf $(DISTDIR)/$(HTTPD_DIST) touch $@ # configure httpd $(HTTPD_OBJDIR)/.configured: $(HTTPD_OBJDIR)/.retrieved \ $(APR_UTIL_OBJDIR)/.installed cd $(HTTPD_OBJDIR) \ && env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`" \ $(HTTPD_SRCDIR)/configure \ --prefix=$(PREFIX)/httpd \ --enable-maintainer-mode \ --enable-ssl \ --enable-dav \ --with-mpm=prefork \ --with-apr="$(PREFIX)/apr" \ --with-apr-util="$(PREFIX)/apr" touch $@ # compile httpd $(HTTPD_OBJDIR)/.compiled: $(HTTPD_OBJDIR)/.configured (cd $(HTTPD_OBJDIR) && env MAKEFLAGS= make) touch $@ # install httpd $(HTTPD_OBJDIR)/.installed: $(HTTPD_OBJDIR)/.compiled (cd $(HTTPD_OBJDIR) && env MAKEFLAGS= make install) touch $@ # create a httpd.conf for mod_dav_svn $(HTTPD_CONF): mkdir -p $(dir $@) echo > $@.tmp '# httpd config for use with mod_dav_svn' echo >>$@.tmp 'ServerRoot "$(PREFIX)/httpd"' echo >>$@.tmp 'Listen localhost:8080' echo >>$@.tmp 'LoadModule dav_svn_module modules/svn-$(WC)/mod_dav_svn.so' echo >>$@.tmp 'LoadModule authz_svn_module modules/svn-$(WC)/mod_authz_svn.so' echo >>$@.tmp 'DocumentRoot "$(PREFIX)/httpd/htdocs"' echo >>$@.tmp '' echo >>$@.tmp ' Options FollowSymLinks' echo >>$@.tmp ' AllowOverride None' echo >>$@.tmp ' Order deny,allow' echo >>$@.tmp ' Deny from all' echo >>$@.tmp '' echo >>$@.tmp '' echo >>$@.tmp ' DAV svn' echo >>$@.tmp ' SVNPath /tmp/svn-sandbox/repos' echo >>$@.tmp ' Allow from localhost' echo >>$@.tmp '' mv -f $@.tmp $@ ####################################################################### # neon ####################################################################### neon-retrieve: $(NEON_OBJDIR)/.retrieved neon-configure: $(NEON_OBJDIR)/.configured neon-compile: $(NEON_OBJDIR)/.compiled neon-install: $(NEON_OBJDIR)/.installed neon-reset: $(foreach f, .retrieved .configured .compiled .installed, \ rm -f $(NEON_OBJDIR)/$(f);) neon-clean: -(cd $(NEON_OBJDIR) && env MAKEFLAGS= make clean) # fetch distfile for neon $(DISTDIR)/$(NEON_DIST): cd $(DISTDIR) && $(FETCH_CMD) $(NEON_URL) # retrieve neon NEON_SVN_URL=http://svn.webdav.org/repos/projects/neon/trunk $(NEON_OBJDIR)/.retrieved: $(DISTDIR)/$(NEON_DIST) [ -d $(NEON_OBJDIR) ] || mkdir -p $(NEON_OBJDIR) tar -C $(SRCDIR) -zxf $(DISTDIR)/$(NEON_DIST) # fix build with OpenSSL lacking SSLv2 support: cd $(NEON_SRCDIR)/src && svn diff -c 1865 \ $(NEON_SVN_URL)/src/ne_openssl.c | patch -p0 cd $(NEON_SRCDIR)/src && svn diff -c 1872 \ $(NEON_SVN_URL)/src/ne_openssl.c | patch -p0 cd $(NEON_SRCDIR)/src && svn diff -c 1865 \ $(NEON_SVN_URL)/src/ne_ssl.h | patch -p0 cd $(NEON_SRCDIR)/src && svn diff -c 1865 \ $(NEON_SVN_URL)/src/ne_session.c | patch -p0 touch $@ # OpenBSD does not have krb5-config in PATH, but the neon port has # a suitable replacement. ifeq ($(UNAME),OpenBSD) KRB5_CONFIG_PATH=/usr/ports/net/neon/files endif # configure neon $(NEON_OBJDIR)/.configured: $(NEON_OBJDIR)/.retrieved cd $(NEON_SRCDIR) && ./autogen.sh if [ -n "$(KRB5_CONFIG_PATH)" ] && [ -d "$(KRB5_CONFIG_PATH)" ]; then \ cp $(KRB5_CONFIG_PATH)/krb5-config $(NEON_OBJDIR); \ chmod +x $(NEON_OBJDIR)/krb5-config; \ fi cd $(NEON_OBJDIR) \ && env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`" \ $(NEON_SRCDIR)/configure \ PATH=$(NEON_OBJDIR):$$PATH \ --prefix=$(PREFIX)/neon \ --with-ssl \ --enable-shared \ --without-libproxy touch $@ # compile neon $(NEON_OBJDIR)/.compiled: $(NEON_OBJDIR)/.configured (cd $(NEON_OBJDIR) && env MAKEFLAGS= make) touch $@ # install neon $(NEON_OBJDIR)/.installed: $(NEON_OBJDIR)/.compiled (cd $(NEON_OBJDIR) && env MAKEFLAGS= make install) touch $@ ####################################################################### # serf ####################################################################### serf-retrieve: $(SERF_OBJDIR)/.retrieved serf-configure: $(SERF_OBJDIR)/.configured serf-compile: $(SERF_OBJDIR)/.compiled serf-install: $(SERF_OBJDIR)/.installed serf-reset: $(foreach f, .retrieved .configured .compiled .installed, \ rm -f $(SERF_OBJDIR)/$(f);) serf-clean: -(cd $(SERF_SRCDIR) && scons -c) # fetch distfile for serf #$(DISTDIR)/$(SERF_DIST): # cd $(DISTDIR) && $(FETCH_CMD) $(SERF_URL) # # retrieve serf #$(SERF_OBJDIR)/.retrieved: $(DISTDIR)/$(SERF_DIST) # [ -d $(SERF_OBJDIR) ] || mkdir -p $(SERF_OBJDIR) # tar -C $(SRCDIR) -zxf $(DISTDIR)/$(SERF_DIST) # cd $(SRCDIR)/serf-$(SERF_VER) && \ # svn diff -c1394 http://serf.googlecode.com/svn | patch -p2 # touch $@ # retrieve serf if not present yet $(SERF_OBJDIR)/.retrieved: [ -d $(SERF_OBJDIR) ] || mkdir -p $(SERF_OBJDIR) if [ ! -d $(SERF_SRCDIR) ]; then \ svn export $(SERF_URL) $(SERF_SRCDIR); \ fi touch $@ # compile serf (serf won't compile outside its source tree) $(SERF_OBJDIR)/.compiled: $(SERF_OBJDIR)/.retrieved \ $(APR_UTIL_OBJDIR)/.installed cd $(SERF_SRCDIR) && \ scons DEBUG=1 CFLAGS="-O0 -g $(PROFILE_CFLAGS)" \ APR=$(PREFIX)/apr \ APU=$(PREFIX)/apr \ PREFIX=$(PREFIX)/serf touch $@ # install serf $(SERF_OBJDIR)/.installed: $(SERF_OBJDIR)/.compiled rm -rf $(PREFIX)/serf # XXX scons cannot reinstall :( cd $(SERF_SRCDIR) && \ scons install # work around unportable scons shared lib support -ln -s libserf-1.so.$(shell echo $(SERF_VER) | sed -e 's/[0-9]$$/0/') \ $(PREFIX)/serf/lib/libserf-1.so touch $@ ####################################################################### # serf-old (compatible with Subversion 1.5) ####################################################################### serf-old-retrieve: $(SERF_OLD_OBJDIR)/.retrieved serf-old-configure: $(SERF_OLD_OBJDIR)/.configured serf-old-compile: $(SERF_OLD_OBJDIR)/.compiled serf-old-install: $(SERF_OLD_OBJDIR)/.installed serf-old-reset: $(foreach f, .retrieved .configured .compiled .installed, \ rm -f $(SERF_OLD_OBJDIR)/$(f);) serf-old-clean: -(cd $(SERF_OLD_SRCDIR) && ./serfmake clean) # retrieve serf if not present yet $(SERF_OLD_OBJDIR)/.retrieved: [ -d $(SERF_OLD_OBJDIR) ] || mkdir -p $(SERF_OLD_OBJDIR) if [ ! -d $(SERF_OLD_SRCDIR) ]; then \ svn export $(SERF_OLD_URL) $(SERF_OLD_SRCDIR); \ fi touch $@ # compile serf (serf won't compile outside its source tree) $(SERF_OLD_OBJDIR)/.compiled: $(SERF_OLD_OBJDIR)/.retrieved \ $(APR_UTIL_OBJDIR)/.installed cd $(SERF_OLD_SRCDIR) && \ env CFLAGS="-O0 -g $(PROFILE_CFLAGS)" \ ./serfmake --with-apr=$(PREFIX)/apr \ --prefix=$(PREFIX)/serf-old \ build touch $@ # install serf $(SERF_OLD_OBJDIR)/.installed: $(SERF_OLD_OBJDIR)/.compiled cd $(SERF_OLD_SRCDIR) && \ ./serfmake --with-apr=$(PREFIX)/apr \ --with-apr-util=$(PREFIX)/apr \ --prefix=$(PREFIX)/serf-old \ install touch $@ ####################################################################### # sqlite ####################################################################### sqlite-retrieve: $(SQLITE_OBJDIR)/.retrieved sqlite-configure: $(SQLITE_OBJDIR)/.configured sqlite-compile: $(SQLITE_OBJDIR)/.compiled sqlite-install: $(SQLITE_OBJDIR)/.installed sqlite-reset: $(foreach f, .retrieved .configured .compiled .installed, \ rm -f $(SQLITE_OBJDIR)/$(f);) sqlite-clean: -cd $(SQLITE_OBJDIR) && env MAKEFLAGS= make clean # fetch distfile for sqlite $(DISTDIR)/$(SQLITE_DIST): cd $(DISTDIR) && $(FETCH_CMD) $(SQLITE_URL) # retrieve sqlite $(SQLITE_OBJDIR)/.retrieved: $(DISTDIR)/$(SQLITE_DIST) [ -d $(SQLITE_OBJDIR) ] || mkdir -p $(SQLITE_OBJDIR) tar -C $(SRCDIR) -zxf $(DISTDIR)/$(SQLITE_DIST) touch $@ ifeq ($(THREADING),yes) THREADSAFE_FLAG=--enable-threadsafe else THREADSAFE_FLAG=--disable-threadsafe endif # configure sqlite $(SQLITE_OBJDIR)/.configured: $(SQLITE_OBJDIR)/.retrieved cd $(SQLITE_OBJDIR) \ && env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`" \ $(SQLITE_SRCDIR)/configure \ --prefix=$(PREFIX)/sqlite \ $(THREADSAFE_FLAG) touch $@ # compile sqlite $(SQLITE_OBJDIR)/.compiled: $(SQLITE_OBJDIR)/.configured (cd $(SQLITE_OBJDIR) && env MAKEFLAGS= make) touch $@ # install sqlite $(SQLITE_OBJDIR)/.installed: $(SQLITE_OBJDIR)/.compiled (cd $(SQLITE_OBJDIR) && env MAKEFLAGS= make install) touch $@ ####################################################################### # cyrus-sasl ####################################################################### cyrus-sasl-retrieve: $(CYRUS_SASL_OBJDIR)/.retrieved cyrus-sasl-configure: $(CYRUS_SASL_OBJDIR)/.configured cyrus-sasl-compile: $(CYRUS_SASL_OBJDIR)/.compiled cyrus-sasl-install: $(CYRUS_SASL_OBJDIR)/.installed cyrus-sasl-reset: $(foreach f, .retrieved .configured .compiled .installed, \ rm -f $(CYRUS_SASL_OBJDIR)/$(f);) cyrus-sasl-clean: -(cd $(CYRUS_SASL_OBJDIR) && env MAKEFLAGS= make distclean) # fetch distfile for cyrus-sasl $(DISTDIR)/$(CYRUS_SASL_DIST): cd $(DISTDIR) && $(FETCH_CMD) $(CYRUS_SASL_URL) # retrieve cyrus-sasl $(CYRUS_SASL_OBJDIR)/.retrieved: $(DISTDIR)/$(CYRUS_SASL_DIST) [ -d $(CYRUS_SASL_OBJDIR) ] || mkdir -p $(CYRUS_SASL_OBJDIR) tar -C $(SRCDIR) -zxf $(DISTDIR)/$(CYRUS_SASL_DIST) # fixes build on Debian: sed 's/#elif WITH_DES/#elif defined(WITH_DES)/' \ < $(CYRUS_SASL_SRCDIR)/plugins/digestmd5.c \ > $(CYRUS_SASL_SRCDIR)/plugins/digestmd5.c.patched mv $(CYRUS_SASL_SRCDIR)/plugins/digestmd5.c.patched \ $(CYRUS_SASL_SRCDIR)/plugins/digestmd5.c ifeq ($(UNAME),OpenBSD) # Fixes GSSAPI support on OpenBSD, which hasn't got libroken: for f in `grep -l -R -- -lroken $(CYRUS_SASL_SRCDIR)`; do \ sed -e 's/-lroken//g' < $$f > $$f.tmp && \ mv $$f.tmp $$f; \ done chmod +x $(CYRUS_SASL_SRCDIR)/configure endif # Fixes excessive auth log spam from sasl if broken .la files exist sed 's/SASL_LOG_WARN/SASL_LOG_DEBUG/' \ < $(CYRUS_SASL_SRCDIR)/lib/dlopen.c \ > $(CYRUS_SASL_SRCDIR)/lib/dlopen.c.patched mv $(CYRUS_SASL_SRCDIR)/lib/dlopen.c.patched \ $(CYRUS_SASL_SRCDIR)/lib/dlopen.c # Fix a weird autotools error about missing cmulocal dir (cd $(CYRUS_SASL_SRCDIR)/saslauthd/ && ln -sf ../cmulocal) touch $@ # configure cyrus-sasl $(CYRUS_SASL_OBJDIR)/.configured: $(CYRUS_SASL_OBJDIR)/.retrieved \ $(BDB_OBJDIR)/.installed $(SQLITE_OBJDIR)/.installed cd $(CYRUS_SASL_OBJDIR) \ && env CFLAGS="-g $(PROFILE_CFLAGS)" \ CPPFLAGS="-I/usr/include/kerberosV" \ GREP="`which grep`" \ $(CYRUS_SASL_SRCDIR)/configure \ --with-dbpath=$(PREFIX)/cyrus-sasl/etc/sasldb2 \ --with-plugindir=$(PREFIX)/cyrus-sasl/lib/sasl2 \ --with-configdir=$(PREFIX)/cyrus-sasl/lib/sasl2 \ --with-bdb-libdir=$(PREFIX)/bdb/lib \ --with-bdb-incdir=$(PREFIX)/bdb/include \ --with-dblib=berkeley \ --with-sqlite=$(PREFIX)/sqlite \ --prefix=$(PREFIX)/cyrus-sasl touch $@ # compile cyrus-sasl $(CYRUS_SASL_OBJDIR)/.compiled: $(CYRUS_SASL_OBJDIR)/.configured (cd $(CYRUS_SASL_OBJDIR) && env MAKEFLAGS= make) touch $@ # install cyrus-sasl $(CYRUS_SASL_OBJDIR)/.installed: $(CYRUS_SASL_OBJDIR)/.compiled (cd $(CYRUS_SASL_OBJDIR) && env MAKEFLAGS= make install) touch $@ ####################################################################### # libmagic ####################################################################### libmagic-retrieve: $(LIBMAGIC_OBJDIR)/.retrieved libmagic-configure: $(LIBMAGIC_OBJDIR)/.configured libmagic-compile: $(LIBMAGIC_OBJDIR)/.compiled libmagic-install: $(LIBMAGIC_OBJDIR)/.installed libmagic-reset: $(foreach f, .retrieved .configured .compiled .installed, \ rm -f $(LIBMAGIC_OBJDIR)/$(f);) libmagic-clean: -(cd $(LIBMAGIC_OBJDIR) && env MAKEFLAGS= make distclean) # fetch distfile for libmagic $(DISTDIR)/$(LIBMAGIC_DIST): cd $(DISTDIR) && $(FETCH_CMD) $(LIBMAGIC_URL) # retrieve libmagic $(LIBMAGIC_OBJDIR)/.retrieved: $(DISTDIR)/$(LIBMAGIC_DIST) [ -d $(LIBMAGIC_OBJDIR) ] || mkdir -p $(LIBMAGIC_OBJDIR) tar -C $(SRCDIR) -zxf $(DISTDIR)/$(LIBMAGIC_DIST) touch $@ # configure libmagic $(LIBMAGIC_OBJDIR)/.configured: $(LIBMAGIC_OBJDIR)/.retrieved cd $(LIBMAGIC_OBJDIR) \ && env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`"\ $(LIBMAGIC_SRCDIR)/configure \ --enable-fsect-man5 \ --prefix=$(PREFIX)/libmagic touch $@ # compile libmagic $(LIBMAGIC_OBJDIR)/.compiled: $(LIBMAGIC_OBJDIR)/.configured (cd $(LIBMAGIC_OBJDIR) && env MAKEFLAGS= make) touch $@ # install libmagic $(LIBMAGIC_OBJDIR)/.installed: $(LIBMAGIC_OBJDIR)/.compiled (cd $(LIBMAGIC_OBJDIR) && env MAKEFLAGS= make install) touch $@ ####################################################################### # ruby ####################################################################### ruby-retrieve: $(RUBY_OBJDIR)/.retrieved ruby-configure: $(RUBY_OBJDIR)/.configured ruby-compile: $(RUBY_OBJDIR)/.compiled ruby-install: $(RUBY_OBJDIR)/.installed ruby-reset: $(foreach f, .retrieved .configured .compiled .installed, \ rm -f $(RUBY_OBJDIR)/$(f);) ruby-clean: -(cd $(RUBY_OBJDIR) && env MAKEFLAGS= make distclean) # fetch distfile for ruby $(DISTDIR)/$(RUBY_DIST): cd $(DISTDIR) && $(FETCH_CMD) $(RUBY_URL) # retrieve ruby # $(RUBY_OBJDIR)/.retrieved: $(DISTDIR)/$(RUBY_DIST) [ -d $(RUBY_OBJDIR) ] || mkdir -p $(RUBY_OBJDIR) tar -C $(SRCDIR) -zxf $(DISTDIR)/$(RUBY_DIST) touch $@ ifeq ($(THREADING),yes) THREADSAFE_FLAG=--enable-pthread else THREADSAFE_FLAG=--disable-pthread endif # configure ruby $(RUBY_OBJDIR)/.configured: $(RUBY_OBJDIR)/.retrieved cd $(RUBY_OBJDIR) \ && env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`"\ $(RUBY_SRCDIR)/configure \ --prefix=$(PREFIX)/ruby \ --enable-shared \ $(THREADSAFE_FLAG) touch $@ # compile ruby $(RUBY_OBJDIR)/.compiled: $(RUBY_OBJDIR)/.configured (cd $(RUBY_OBJDIR) && env MAKEFLAGS= make) touch $@ # install ruby $(RUBY_OBJDIR)/.installed: $(RUBY_OBJDIR)/.compiled (cd $(RUBY_OBJDIR) && env MAKEFLAGS= make install) touch $@ ####################################################################### # bz2 ####################################################################### bz2-retrieve: $(BZ2_OBJDIR)/.retrieved bz2-compile: $(BZ2_OBJDIR)/.compiled bz2-install: $(BZ2_OBJDIR)/.installed bz2-reset: $(foreach f, .retrieved .configured .compiled .installed, \ rm -f $(BZ2_OBJDIR)/$(f);) bz2-clean: -(cd $(BZ2_SRCDIR) && env MAKEFLAGS= make distclean) # fetch distfile for bz2 $(DISTDIR)/$(BZ2_DIST): cd $(DISTDIR) && $(FETCH_CMD) $(BZ2_URL) # retrieve bz2 $(BZ2_OBJDIR)/.retrieved: $(DISTDIR)/$(BZ2_DIST) [ -d $(BZ2_OBJDIR) ] || mkdir -p $(BZ2_OBJDIR) tar -C $(SRCDIR) -zxf $(DISTDIR)/$(BZ2_DIST) touch $@ # compile bz2 $(BZ2_OBJDIR)/.compiled: $(BZ2_OBJDIR)/.retrieved (cd $(BZ2_SRCDIR) && env MAKEFLAGS= make CFLAGS="-g $(PROFILE_CFLAGS) -fPIC") touch $@ # install bz2 $(BZ2_OBJDIR)/.installed: $(BZ2_OBJDIR)/.compiled (cd $(BZ2_SRCDIR) && env MAKEFLAGS= make install PREFIX=$(PREFIX)/bz2) touch $@ ####################################################################### # python ####################################################################### python-retrieve: $(PYTHON_OBJDIR)/.retrieved python-configure: $(PYTHON_OBJDIR)/.configured python-compile: $(PYTHON_OBJDIR)/.compiled python-install: $(PYTHON_OBJDIR)/.installed python-reset: $(foreach f, .retrieved .configured .compiled .installed, \ rm -f $(PYTHON_OBJDIR)/$(f);) python-clean: -(cd $(PYTHON_OBJDIR) && env MAKEFLAGS= make distclean) # fetch distfile for python $(DISTDIR)/$(PYTHON_DIST): cd $(DISTDIR) && $(FETCH_CMD) $(PYTHON_URL) # retrieve python # $(PYTHON_OBJDIR)/.retrieved: $(DISTDIR)/$(PYTHON_DIST) [ -d $(PYTHON_OBJDIR) ] || mkdir -p $(PYTHON_OBJDIR) tar -C $(SRCDIR) -zxf $(DISTDIR)/$(PYTHON_DIST) # Make setup.py use our own dependencies instead of system ones sed -e "s#sqlite_inc_paths = \[ '/usr/include',#sqlite_inc_paths = [ '$(PREFIX)/sqlite/include',#" \ -e "s#'/usr/include/db4'#'$(PREFIX)/bdb/include'#" \ -e "s|\(add_dir_to_list(self.compiler.library_dirs, '/usr/local/lib')\)|#\1|" \ -e "s|\(add_dir_to_list(self.compiler.include_dirs, '/usr/local/include')\)|#\1|" \ -e "s#find_library_file(lib_dirs, 'bz2'#find_library_file(['$(PREFIX)/bz2/lib'] + lib_dirs, 'bz2'#" \ < $(PYTHON_SRCDIR)/setup.py \ > $(PYTHON_SRCDIR)/setup.py.patched mv $(PYTHON_SRCDIR)/setup.py.patched $(PYTHON_SRCDIR)/setup.py chmod +x $(PYTHON_SRCDIR)/setup.py # Fixes shared library linking on OpenBSD # http://bugs.python.org/issue12560 # Also fix compilation error on OpenBSD 5.0 and later (undefined # reference to 'lstat' -- already fixed in hg.python.org/cpython). sed -e '4930s#NetBSD\*|#NetBSD*|OpenBSD*|#' \ -e 's#OpenBSD/4\.\[789\]#OpenBSD/*#' \ < $(PYTHON_SRCDIR)/configure \ > $(PYTHON_SRCDIR)/configure.patched mv $(PYTHON_SRCDIR)/configure.patched $(PYTHON_SRCDIR)/configure chmod +x $(PYTHON_SRCDIR)/configure touch $@ # configure python ifdef PROFILE PYTHON_PROFILING=--enable-profiling endif $(PYTHON_OBJDIR)/.configured: $(PYTHON_OBJDIR)/.retrieved \ $(BZ2_OBJDIR)/.installed cd $(PYTHON_OBJDIR) \ && env CFLAGS="-g $(PROFILE_CFLAGS)" GREP="`which grep`" \ CPPFLAGS="-I$(PREFIX)/bz2/include" \ LDFLAGS="-Wl,-rpath=$(PREFIX)/python/lib -L$(PREFIX)/bz2/lib" \ $(PYTHON_SRCDIR)/configure \ --prefix=$(PREFIX)/python \ --enable-shared \ --with-system-expat \ --with-dbmliborder=bdb \ $(PYTHON_PROFILING) touch $@ # compile python $(PYTHON_OBJDIR)/.compiled: $(PYTHON_OBJDIR)/.configured (cd $(PYTHON_OBJDIR) && env MAKEFLAGS= make) touch $@ # install python $(PYTHON_OBJDIR)/.installed: $(PYTHON_OBJDIR)/.compiled (cd $(PYTHON_OBJDIR) && env MAKEFLAGS= make install) touch $@ ####################################################################### # junit ####################################################################### # fetch distfile for junit $(DISTDIR)/$(JUNIT_DIST): cd $(DISTDIR) && $(FETCH_CMD) $(JUNIT_URL) ####################################################################### # svn ####################################################################### .PHONY: svn-configure svn-compile svn-install svn-bindings-compile \ svn-bindings-install svn-bindings-reset svn-clean svn-install-all: svn-install svn-bindings-install svn-configure: $(SVN_OBJDIR)/.configured svn-compile: $(SVN_OBJDIR)/.compiled svn-bindings-compile: $(SVN_OBJDIR)/.bindings-compiled svn-install: $(SVN_OBJDIR)/.installed svn-bindings-install: $(SVN_OBJDIR)/.bindings-installed svn-bindings-reset: $(foreach f, .bindings-compiled .bindings-installed, \ rm -f $(SVN_OBJDIR)/$(f);) svn-reset: svn-bindings-reset $(foreach f, .retrieved .configured .compiled .installed \ .bindings-compiled .bindings-installed, \ rm -f $(SVN_OBJDIR)/$(f);) svn-clean: -(cd $(svn_builddir) && env MAKEFLAGS= make distclean) # retrieve svn if not present yet $(SVN_OBJDIR)/.retrieved: [ -d $(SVN_OBJDIR) ] || mkdir -p $(SVN_OBJDIR) if [ "$(TAG)" != "none" ]; then \ branchdir="tags/$(TAG)"; \ co="export"; \ elif [ $(BRANCH) != trunk ]; then \ branchdir="branches/$(BRANCH)"; \ co="co"; \ else \ branchdir="$(BRANCH)"; \ co="co"; \ fi; \ if [ ! -d $(SVN_WC) ] && [ ! -h $(SVN_WC) ]; then \ svn $${co} $(SUBVERSION_REPOS_URL)/$${branchdir} \ $(SVN_WC); \ fi touch $@ ifeq ($(BRANCH_MAJOR),1.7) BDB_FLAG=db.h:$(PREFIX)/bdb/include:$(PREFIX)/bdb/lib:db-$(BDB_MAJOR_VER) SERF_FLAG=--with-serf="$(PREFIX)/serf" SERF_LDFLAG=-Wl,-rpath,$(PREFIX)/serf/lib -Wl,-rpath,$(PREFIX)/bdb/lib MOD_DAV_SVN=modules/svn-$(WC)/mod_dav_svn.so MOD_AUTHZ_SVN=modules/svn-$(WC)/mod_authz_svn.so LIBMAGIC_FLAG=--with-libmagic=$(PREFIX)/libmagic NEON_FLAG=--with-neon="$(PREFIX)/neon" JAVAHL_CHECK_TARGET=check-javahl else ifeq ($(BRANCH_MAJOR),1.6) BDB_FLAG=db.h:$(PREFIX)/bdb/include:$(PREFIX)/bdb/lib:db-$(BDB_MAJOR_VER) SERF_FLAG=--with-serf="$(PREFIX)/serf" SERF_LDFLAG=-Wl,-rpath,$(PREFIX)/serf/lib -Wl,-rpath,$(PREFIX)/bdb/lib MOD_DAV_SVN=modules/svn-$(WC)/mod_dav_svn.so MOD_AUTHZ_SVN=modules/svn-$(WC)/mod_authz_svn.so W_NO_SYSTEM_HEADERS=-Wno-system-headers NEON_FLAG=--with-neon="$(PREFIX)/neon" JAVAHL_CHECK_TARGET=check-javahl else ifeq ($(BRANCH_MAJOR),1.5) BDB_FLAG=$(PREFIX)/bdb SERF_FLAG=--with-serf="$(PREFIX)/serf-old" MOD_DAV_SVN=modules/mod_dav_svn.so MOD_AUTHZ_SVN=modules/mod_authz_svn.so DISABLE_NEON_VERSION_CHECK=--disable-neon-version-check W_NO_SYSTEM_HEADERS=-Wno-system-headers NEON_FLAG=--with-neon="$(PREFIX)/neon" JAVAHL_CHECK_TARGET=check-javahl else # 1.8 BDB_FLAG=db.h:$(PREFIX)/bdb/include:$(PREFIX)/bdb/lib:db-$(BDB_MAJOR_VER) SERF_FLAG=--with-serf="$(PREFIX)/serf" # serf >= 1.3.0 is built with scons and no longer sets up rpath linker flags, # so we have to do that ourselves :( SERF_LDFLAG=-Wl,-rpath,$(PREFIX)/serf/lib -Wl,-rpath,$(PREFIX)/bdb/lib MOD_DAV_SVN=modules/svn-$(WC)/mod_dav_svn.so MOD_AUTHZ_SVN=modules/svn-$(WC)/mod_authz_svn.so LIBMAGIC_FLAG=--with-libmagic=$(PREFIX)/libmagic JAVAHL_CHECK_TARGET=check-all-javahl endif ifeq ($(ENABLE_JAVA_BINDINGS),yes) JAVAHL_FLAG=--enable-javahl=yes --with-jdk --with-jikes=no \ --with-junit=$(DISTDIR)/$(JUNIT_DIST) else JAVAHL_FLAG=--with-jdk=no endif ifdef PROFILE SVN_STATIC_FLAG=--enable-all-static else SVN_STATIC_FLAG=--disable-static SVN_WITH_HTTPD=--with-apxs="$(PREFIX)/httpd/bin/apxs" \ --with-apache-libexecdir="$(PREFIX)/httpd/modules/svn-$(WC)" SVN_WITH_SASL=--with-sasl="$(PREFIX)/cyrus-sasl" endif $(SVN_OBJDIR)/.configured: $(SVN_OBJDIR)/.retrieved $(DISTDIR)/$(JUNIT_DIST) \ $(APR_OBJDIR)/.installed $(APR_UTIL_OBJDIR)/.installed \ $(BDB_OBJDIR)/.installed $(SQLITE_OBJDIR)/.installed \ $(HTTPD_OBJDIR)/.installed $(CYRUS_SASL_OBJDIR)/.installed \ $(LIBMAGIC_OBJDIR)/.installed $(NEON_OBJDIR)/.installed \ $(SERF_OBJDIR)/.installed $(SERF_OLD_OBJDIR)/.installed \ $(RUBY_OBJDIR)/.installed $(PYTHON_OBJDIR)/.installed cd $(SVN_SRCDIR) && ./autogen.sh cd $(svn_builddir) && \ env LDFLAGS="-L$(PREFIX)/neon/lib -L$(PREFIX)/apr/lib $(SERF_LDFLAG)" \ LD_LIBRARY_PATH="$(LD_LIBRARY_PATH):$$LD_LIBRARY_PATH" \ GREP="`which grep`" \ PATH=$(PREFIX)/ruby/bin:$(PREFIX)/python/bin:$$PATH \ $(SVN_SRCDIR)/configure \ --enable-maintainer-mode \ --with-ssl \ --prefix="$(SVN_PREFIX)" \ --with-apr="$(PREFIX)/apr" \ --with-apr-util="$(PREFIX)/apr" \ $(NEON_FLAG) \ $(SVN_WITH_HTTPD) \ $(SVN_WITH_SASL) \ $(SERF_FLAG) \ --with-sqlite="$(PREFIX)/sqlite" \ --with-berkeley-db="$(BDB_FLAG)" \ --with-ruby-sitedir="$(SVN_PREFIX)/lib/ruby/site_ruby" \ --disable-mod-activation \ $(JAVAHL_FLAG) \ $(LIBMAGIC_FLAG) \ $(SVN_STATIC_FLAG) \ $(DISABLE_NEON_VERSION_CHECK) touch $@ # compile svn $(SVN_OBJDIR)/.compiled: $(SVN_OBJDIR)/.configured cd $(svn_builddir) \ && env MAKEFLAGS= make EXTRA_CFLAGS="$(PROFILE_CFLAGS) $(W_NO_SYSTEM_HEADERS)" touch $@ # install svn $(SVN_OBJDIR)/.installed: $(SVN_OBJDIR)/.compiled cd $(svn_builddir) \ && env MAKEFLAGS= make install touch $@ # SWIG 1.x and 2.x are not compatible. If SWIG 2.x is used to generated .swg # files and 1.x is used to build the bindings, the Python bindings fail to # load with errors such as "undefined symbol 'SWIG_Python_str_AsChar'". # So clean any pre-generated .swg files to make sure everything is done # by the same version of SWIG. $(SVN_OBJDIR)/.pre-generated-swig-cleaned: -cd $(svn_builddir) \ && env MAKEFLAGS= make clean-swig touch $@ $(SVN_OBJDIR)/.bindings-compiled: $(SVN_OBJDIR)/.installed $(SVN_OBJDIR)/.pre-generated-swig-cleaned cd $(svn_builddir) \ && env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \ env MAKEFLAGS= make swig-py cd $(svn_builddir) && \ env PATH=$(PREFIX)/ruby/bin:$$PATH \ LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) env MAKEFLAGS= make swig-rb if [ $(ENABLE_PERL_BINDINGS) = yes ]; then \ cd $(svn_builddir) \ && env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \ env MAKEFLAGS= make swig-pl; \ fi if [ $(ENABLE_JAVA_BINDINGS) = yes ]; then \ cd $(svn_builddir) \ && env MAKEFLAGS= make javahl; \ fi touch $@ $(SVN_OBJDIR)/.bindings-installed: $(SVN_OBJDIR)/.bindings-compiled cd $(svn_builddir) \ && env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \ env MAKEFLAGS= make install-swig-py cd $(svn_builddir) && \ env PATH=$(PREFIX)/ruby/bin:$$PATH \ LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) env MAKEFLAGS= make install-swig-rb if [ $(ENABLE_PERL_BINDINGS) = yes ]; then \ cd $(svn_builddir) \ && env MAKEFLAGS= make install-swig-pl-lib; \ cd subversion/bindings/swig/perl/native \ && perl Makefile.PL PREFIX="$(SVN_PREFIX)" \ && env MAKEFLAGS= make install; \ fi if [ $(ENABLE_JAVA_BINDINGS) = yes ]; then \ cd $(svn_builddir) \ && env MAKEFLAGS= make install-javahl; \ fi touch $@ # run svn regression tests HTTPD_CHECK_CONF=$(PREFIX)/httpd/conf/httpd-svn-check-$(WC).conf HTTPD_CHECK_USERS=$(PREFIX)/httpd/conf/httpd-svn-check-users HTTPD_CHECK_PORT=8081 $(HTTPD_CHECK_USERS): mkdir -p $(dir $@) echo > $@.tmp 'jrandom:xCGl35kV9oWCY' echo >>$@.tmp 'jconstant:xCGl35kV9oWCY' mv -f $@.tmp $@ $(HTTPD_CHECK_CONF): $(HTTPD_CHECK_USERS) echo > $@.tmp '# httpd config for make check' echo >>$@.tmp 'ServerRoot "$(PREFIX)/httpd"' echo >>$@.tmp 'Listen localhost:$(HTTPD_CHECK_PORT)' echo >>$@.tmp 'LoadModule dav_svn_module $(MOD_DAV_SVN)' echo >>$@.tmp 'LoadModule authz_svn_module $(MOD_AUTHZ_SVN)' echo >>$@.tmp 'DocumentRoot "$(PREFIX)/httpd/htdocs"' echo >>$@.tmp '# These two Locations are used for "make check"' echo >>$@.tmp '' echo >>$@.tmp ' Options FollowSymLinks' echo >>$@.tmp ' AllowOverride None' echo >>$@.tmp ' Order deny,allow' echo >>$@.tmp ' Allow from all' echo >>$@.tmp '' echo >>$@.tmp '' echo >>$@.tmp ' DAV svn' echo >>$@.tmp ' SVNParentPath $(SVN_WC)/subversion/tests/cmdline/svn-test-work/repositories' echo >>$@.tmp ' AuthzSVNAccessFile $(SVN_WC)/subversion/tests/cmdline/svn-test-work/authz' echo >>$@.tmp ' AuthType Basic' echo >>$@.tmp ' AuthName "Subversion Repository"' echo >>$@.tmp ' AuthUserFile $(HTTPD_CHECK_USERS)' echo >>$@.tmp ' Require valid-user' ifeq ($(USE_HTTPV1),yes) echo >>$@.tmp ' SVNAdvertiseV2Protocol off' endif ifeq ($(USE_AUTHZ_SHORT_CIRCUIT),yes) echo >>$@.tmp ' SVNPathAuthz short_circuit' endif echo >>$@.tmp '' echo >>$@.tmp '' echo >>$@.tmp ' DAV svn' echo >>$@.tmp ' SVNPath $(SVN_WC)/subversion/tests/cmdline/svn-test-work/local_tmp/repos' echo >>$@.tmp ' AuthzSVNAccessFile $(SVN_WC)/subversion/tests/cmdline/svn-test-work/authz' echo >>$@.tmp ' AuthType Basic' echo >>$@.tmp ' AuthName "Subversion Repository"' echo >>$@.tmp ' AuthUserFile $(HTTPD_CHECK_USERS)' echo >>$@.tmp ' Require valid-user' ifeq ($(USE_HTTPV1),yes) echo >>$@.tmp ' SVNAdvertiseV2Protocol off' endif ifeq ($(USE_AUTHZ_SHORT_CIRCUIT),yes) echo >>$@.tmp ' SVNPathAuthz short_circuit' endif echo >>$@.tmp '' echo >>$@.tmp '# This Location lets you access repositories dropped in /tmp/' echo >>$@.tmp '' echo >>$@.tmp ' DAV svn' echo >>$@.tmp ' SVNParentPath /tmp' echo >>$@.tmp ' Allow from all' ifeq ($(USE_HTTPV1),yes) echo >>$@.tmp ' SVNAdvertiseV2Protocol off' endif ifeq ($(USE_AUTHZ_SHORT_CIRCUIT),yes) echo >>$@.tmp ' SVNPathAuthz short_circuit' endif echo >>$@.tmp '' echo >>$@.tmp 'RedirectMatch permanent ^/svn-test-work/repositories/REDIRECT-PERM-(.*)$$ /svn-test-work/repositories/$$1' echo >>$@.tmp 'RedirectMatch ^/svn-test-work/repositories/REDIRECT-TEMP-(.*)$$ /svn-test-work/repositories/$$1' mv -f $@.tmp $@ .PHONY: libpath libpath: @echo export LD_LIBRARY_PATH="$(LD_LIBRARY_PATH):$$LD_LIBRARY_PATH" \ "PYTHONPATH=$(SVN_PREFIX)/lib/svn-python" # # OpenBSD requires an LD_PRELOAD hack to dlopen() libraries linked to # libpthread (e.g. libsvn_auth_gnome_keyring.so) into executables that # aren't linked to libpthread. ifeq ($(UNAME),OpenBSD) LIB_PTHREAD_HACK=LD_PRELOAD=libpthread.so endif .PHONY: start-svnserve stop-svnserve start-httpd stop-httpd HTTPD_CMD = env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) $(LIB_PTHREAD_HACK) \ $(PREFIX)/httpd/bin/apachectl -f $(HTTPD_CHECK_CONF) HTTPD_START_CMD = $(HTTPD_CMD) -k start HTTPD_START_CMD_DEBUG = $(HTTPD_START_CMD) -X HTTPD_STOP_CMD = $(HTTPD_CMD) -k stop; sleep 3 SVNSERVE_START_CMD = (test -e $(PWD)/svnserve-*.pid && \ ls $(PWD)/svnserve-*.pid | while read pidfile; do \ kill `cat "$$pidfile"`; sleep 3; \ rm -f $$pidfile; \ done); \ $(SVN_PREFIX)/bin/svnserve \ --listen-host 127.0.0.1 \ --pid-file $(PWD)/svnserve-$(WC).pid \ -d -r $(svn_builddir)/subversion/tests/cmdline SVNSERVE_STOP_CMD = kill `cat $(PWD)/svnserve-$(WC).pid`; sleep 3; \ rm -f $(PWD)/svnserve-$(WC).pid start-httpd: $(HTTPD_CHECK_CONF) $(HTTPD_START_CMD) @echo "To run tests over http, run:" @echo " make check BASE_URL=http://localhost:$(HTTPD_CHECK_PORT)" @echo "The URL http://localhost:$(HTTPD_CHECK_PORT)/svn/" @echo "lets you access repositories dropped into /tmp" start-httpd-debug: $(HTTPD_CHECK_CONF) $(HTTPD_START_CMD_DEBUG) & @echo "To run tests over http, run:" @echo " make check BASE_URL=http://localhost:$(HTTPD_CHECK_PORT)" @echo "The URL http://localhost:$(HTTPD_CHECK_PORT)/svn/" @echo "lets you access repositories dropped into /tmp" @echo "Trying to attach gdb to httpd..." @sleep 1 gdb $(PREFIX)/httpd/bin/httpd `cat $(PREFIX)/httpd/logs/httpd.pid` stop-httpd: $(HTTPD_STOP_CMD) start-svnserve: $(SVN_OBJDIR)/.compiled $(SVNSERVE_START_CMD) stop-svnserve: $(SVNSERVE_STOP_CMD) define do_check -cd $(svn_builddir) && for fs in fsfs bdb; do \ echo "Begin test: $(subst svn-check-,,$@) x $$fs"; \ test -d "$(RAMDISK)/tmp" && export TMPDIR="$(RAMDISK)/tmp"; \ env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) $(LIB_PTHREAD_HACK) \ env MAKEFLAGS= make check PARALLEL=$(PARALLEL) CLEANUP=$(CLEANUP) \ EXCLUSIVE_WC_LOCKS=$(EXCLUSIVE_WC_LOCKS) $1 FS_TYPE=$$fs; \ for log in tests.log fails.log; do \ test -f $$log && mv -f $$log $$log.$@-$$fs; \ done; \ done endef TEST_WORK=$(svn_builddir)/subversion/tests/cmdline/svn-test-work svn-check-prepare-ramdisk: -rm -rf "$(TEST_WORK)"; \ if [ -d "$(RAMDISK)" ] && \ touch "$(RAMDISK)/$(SVN_REL_WC).writetest" && \ mkdir -p "$(RAMDISK)/$(SVN_REL_WC)"; then \ rm -f "$(RAMDISK)/$(SVN_REL_WC).writetest"; \ ln -s "$(RAMDISK)/$(SVN_REL_WC)" "$(TEST_WORK)"; \ mkdir -p "$(RAMDISK)/tmp"; \ fi ifndef NEON_FLAG svn-check-neon: @echo Neon is not supported by this build of Subversion, skipping tests @true else svn-check-neon: $(HTTPD_CHECK_CONF) $(SVN_OBJDIR)/.compiled $(SVN_OBJDIR)/.bindings-compiled svn-check-prepare-ramdisk $(HTTPD_START_CMD) $(call do_check,BASE_URL=http://localhost:$(HTTPD_CHECK_PORT) HTTP_LIBRARY=neon) $(HTTPD_STOP_CMD) endif svn-check-serf: $(HTTPD_CHECK_CONF) $(SVN_OBJDIR)/.compiled $(SVN_OBJDIR)/.bindings-compiled svn-check-prepare-ramdisk $(HTTPD_START_CMD) $(call do_check,BASE_URL=http://localhost:$(HTTPD_CHECK_PORT) HTTP_LIBRARY=serf) $(HTTPD_STOP_CMD) svn-check-local: svn-check-prepare-ramdisk $(call do_check) svn-check-svn: svn-check-prepare-ramdisk $(SVNSERVE_START_CMD) $(call do_check,BASE_URL=svn://127.0.0.1) $(SVNSERVE_STOP_CMD) .PHONY: svn-check-swig-pl svn-check-swig-py svn-check-swig-rb svn-check-javahl svn-check-bindings: svn-check-swig-pl svn-check-swig-py svn-check-swig-rb \ svn-check-javahl RUBYLIB=$(SVN_PREFIX)/lib/ruby/site_ruby$(shell grep \ ^svn_cv_ruby_sitedir_archsuffix $(svn_builddir)/config.log | \ cut -d'=' -f2):$(SVN_PREFIX)/lib/ruby/site_ruby$(shell \ grep ^svn_cv_ruby_sitedir_libsuffix $(svn_builddir)/config.log | \ cut -d'=' -f2) svn-check-swig-pl: -if [ $(ENABLE_PERL_BINDINGS) = yes ]; then \ (cd $(svn_builddir) && \ env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \ $(LIB_PTHREAD_HACK) \ env MAKEFLAGS= make check-swig-pl 2>&1) | \ tee $(svn_builddir)/tests.log.bindings.pl; \ fi svn-check-swig-py: -(cd $(svn_builddir) && \ env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \ env MAKEFLAGS= make check-swig-py 2>&1) | \ tee $(svn_builddir)/tests.log.bindings.py # We add the svn prefix to PATH here because the ruby tests # attempt to start an svnserve binary found in PATH. svn-check-swig-rb: (cd $(svn_builddir) && \ env RUBYLIB=$(RUBYLIB) \ LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \ PATH=$(SVN_PREFIX)/bin:$$PATH \ $(LIB_PTHREAD_HACK) \ env MAKEFLAGS= make check-swig-rb 2>&1) | \ tee $(svn_builddir)/tests.log.bindings.rb svn-check-javahl: -if [ $(ENABLE_JAVA_BINDINGS) = yes ]; then \ (cd $(svn_builddir) && \ env LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) \ env MAKEFLAGS= make $(JAVAHL_CHECK_TARGET) 2>&1) | \ tee $(svn_builddir)/tests.log.bindings.javahl; \ fi svn-check: svn-check-prepare-ramdisk svn-check-local svn-check-svn \ svn-check-neon svn-check-serf svn-check-bindings .PHONY: sign-email ifdef NEON_FLAG NEON_STR=ra_neon | NEON_VER_LINE=@echo "neon: $(NEON_VER)" endif sign-email: @echo "Summary: +1 to release" @echo "" @echo "Tested: [bdb | fsfs] x [ra_local | ra_svn | $(NEON_STR)ra_serf]" @echo " swig bindings" ifeq ($(ENABLE_JAVA_BINDINGS),yes) @echo " javahl bindings" endif @echo "" @echo "Test results: All passed." @echo "" @echo "Platform: `uname -r -s -m`" @echo "" @echo "Dependencies:" @echo "bdb: $(BDB_VER)" ifeq ($(USE_APR_ICONV),yes) @echo "apr-iconv: $(APR_ICONV_VER)" else @echo "GNU-iconv: $(GNU_ICONV_VER)" endif @echo "apr: $(APR_VER)" @echo "apr-util: $(APR_UTIL_VER)" @echo "httpd: $(HTTPD_VER)" $(NEON_VER_LINE) @echo "serf: $(SERF_VER)" @echo "cyrus-sasl: $(CYRUS_SASL_VER)" @echo "sqlite: $(SQLITE_VER)" @echo "openssl: `openssl version | cut -d' ' -f2`" @echo "swig: `swig -version | grep Version | cut -d' ' -f3`" @echo "python: $(PYTHON_VER)" @echo "perl: `eval \`perl -V:version\`; echo $$version`" @echo "ruby: $(RUBY_VER)" ifeq ($(ENABLE_JAVA_BINDINGS),yes) @echo "java: `java -version 2>&1 | grep version | cut -d' ' -f3 | sed -e 's/\"//g'`" endif @echo "" @echo "Signatures:" @echo @echo "subversion-$(TAG).tar.gz" @echo "`cat subversion-$(TAG).tar.gz.asc`" @echo @echo "subversion-$(TAG).tar.bz2" @echo "`cat subversion-$(TAG).tar.bz2.asc`"