Index: spamassassin_release_3_3_2_rc_1/INSTALL =================================================================== --- spamassassin_release_3_3_2_rc_1.orig/INSTALL 2011-05-14 09:04:39.000000000 -0700 +++ spamassassin_release_3_3_2_rc_1/INSTALL 2011-05-14 11:55:36.000000000 -0700 @@ -455,7 +455,7 @@ perl interpreter. Version 2.83 or later fixes this. If you do not plan to use this plugin, be sure to comment out - its loadplugin line in "/etc/mail/spamassassin/v310.pre". + its loadplugin line in "/etc/spamassassin/v310.pre". What Next? Index: spamassassin_release_3_3_2_rc_1/README =================================================================== --- spamassassin_release_3_3_2_rc_1.orig/README 2011-05-14 09:04:39.000000000 -0700 +++ spamassassin_release_3_3_2_rc_1/README 2011-05-14 11:55:36.000000000 -0700 @@ -111,13 +111,13 @@ not modify these, as they are overwritten when you run "sa-update". - - /etc/mail/spamassassin/*.cf: + - /etc/spamassassin/*.cf: Site config files, for system admins to create, modify, and add local rules and scores to. Modifications here will be appended to the config loaded from the above directory. - - /etc/mail/spamassassin/*.pre: + - /etc/spamassassin/*.pre: Plugin control files, installed from the distribution. These are used to control what plugins are loaded. Modifications here will @@ -126,7 +126,7 @@ You want to modify these files if you want to load additional plugins, or inhibit loading a plugin that is enabled by default. - If the files exist in /etc/mail/spamassassin, they will not + If the files exist in /etc/spamassassin, they will not be overwritten during future installs. - /usr/share/spamassassin/user_prefs.template: @@ -134,14 +134,14 @@ Distributed default user preferences. Do not modify this, as it is overwritten when you upgrade. - - /etc/mail/spamassassin/user_prefs.template: + - /etc/spamassassin/user_prefs.template: Default user preferences, for system admins to create, modify, and set defaults for users' preferences files. Takes precedence over the above prefs file, if it exists. Do not put system-wide settings in here; put them in a file in the - "/etc/mail/spamassassin" directory ending in ".cf". This file is + "/etc/spamassassin" directory ending in ".cf". This file is just a template, which will be copied to a user's home directory for them to change. Index: spamassassin_release_3_3_2_rc_1/UPGRADE =================================================================== --- spamassassin_release_3_3_2_rc_1.orig/UPGRADE 2011-05-14 09:04:39.000000000 -0700 +++ spamassassin_release_3_3_2_rc_1/UPGRADE 2011-05-14 11:55:36.000000000 -0700 @@ -49,7 +49,7 @@ perldoc Mail::SpamAssassin::Plugin::* (ie AWL, DCC, etc) - There are now multiple files read to enable plugins in the - /etc/mail/spamassassin directory; previously only one, "init.pre" was + /etc/spamassassin directory; previously only one, "init.pre" was read. Now both "init.pre", "v310.pre", and any other files ending in ".pre" will be read. As future releases are made, new plugins will be added to new files named according to the release they're @@ -207,7 +207,7 @@ - If you are using a UNIX machine with all database files on local disks, and no sharing of those databases across NFS filesystems, you can use a more efficient, but non-NFS-safe, locking mechanism. Do this by adding - the line "lock_method flock" to the /etc/mail/spamassassin/local.cf + the line "lock_method flock" to the /etc/spamassassin/local.cf file. This is strongly recommended if you're not using NFS, as it is much faster than the NFS-safe locker. Index: spamassassin_release_3_3_2_rc_1/USAGE =================================================================== --- spamassassin_release_3_3_2_rc_1.orig/USAGE 2011-05-14 09:04:39.000000000 -0700 +++ spamassassin_release_3_3_2_rc_1/USAGE 2011-05-14 11:55:36.000000000 -0700 @@ -117,7 +117,7 @@ CPU-intensive task before they can send mail to you, so we give that some bonus points. However, it requires that you list what addresses you expect to receive mail for, by adding 'hashcash_accept' lines to - your ~/.spamassassin/user_prefs or /etc/mail/spamassassin/local.cf + your ~/.spamassassin/user_prefs or /etc/spamassassin/local.cf files. See the Mail::SpamAssassin::Plugin::Hashcash manual page for details on how to specify these. @@ -129,14 +129,14 @@ - You can create your own system-wide rules files in - /etc/mail/spamassassin; their filenames should end in ".cf". Multiple + /etc/spamassassin; their filenames should end in ".cf". Multiple files will be read, and SpamAssassin will not overwrite these files when installing a new version. - You should not modify the files in /usr/share/spamassassin; these will be overwritten when you upgrade. Any changes you make in - files in the /etc/mail/spamassassin directory, however, will + files in the /etc/spamassassin directory, however, will override these files. Index: spamassassin_release_3_3_2_rc_1/ldap/README =================================================================== --- spamassassin_release_3_3_2_rc_1.orig/ldap/README 2011-05-14 09:04:33.000000000 -0700 +++ spamassassin_release_3_3_2_rc_1/ldap/README 2011-05-14 11:55:36.000000000 -0700 @@ -13,7 +13,7 @@ database or LDAP server. SpamAssassin will check the global configuration file (ie. any file matching -/etc/mail/spamassassin/*.cf) for the following settings: +/etc/spamassassin/*.cf) for the following settings: user_scores_dsn ldap://host:port/dc=basedn,dc=de?attr?scope?uid=__USERNAME__ user_scores_ldap_username bind dn Index: spamassassin_release_3_3_2_rc_1/lib/Mail/SpamAssassin/Conf.pm =================================================================== --- spamassassin_release_3_3_2_rc_1.orig/lib/Mail/SpamAssassin/Conf.pm 2011-05-14 09:04:33.000000000 -0700 +++ spamassassin_release_3_3_2_rc_1/lib/Mail/SpamAssassin/Conf.pm 2011-05-14 11:55:36.000000000 -0700 @@ -40,7 +40,7 @@ =head1 DESCRIPTION SpamAssassin is configured using traditional UNIX-style configuration files, -loaded from the C and C +loaded from the C and C directories. The following web page lists the most important configuration settings @@ -1956,7 +1956,7 @@ These settings differ from the ones above, in that they are considered 'privileged'. Only users running C from their procmailrc's or -forward files, or sysadmins editing a file in C, can +forward files, or sysadmins editing a file in C, can use them. C users cannot use them in their C files, for security and efficiency reasons, unless C is enabled (and then, they may only add rules from below). Index: spamassassin_release_3_3_2_rc_1/lib/Mail/SpamAssassin/Plugin/Test.pm =================================================================== --- spamassassin_release_3_3_2_rc_1.orig/lib/Mail/SpamAssassin/Plugin/Test.pm 2011-05-14 09:04:33.000000000 -0700 +++ spamassassin_release_3_3_2_rc_1/lib/Mail/SpamAssassin/Plugin/Test.pm 2011-05-14 11:55:36.000000000 -0700 @@ -27,7 +27,7 @@ =head1 DESCRIPTION To try this plugin, write the above two lines in the synopsis to -C. +C. =cut Index: spamassassin_release_3_3_2_rc_1/lib/spamassassin-run.pod =================================================================== --- spamassassin_release_3_3_2_rc_1.orig/lib/spamassassin-run.pod 2011-05-14 09:04:33.000000000 -0700 +++ spamassassin_release_3_3_2_rc_1/lib/spamassassin-run.pod 2011-05-14 11:55:36.000000000 -0700 @@ -41,7 +41,7 @@ -p prefs, --prefspath=file, --prefs-file=file Set user preferences file --siteconfigpath=path Path for site configs - (def: /etc/mail/spamassassin) + (def: /etc/spamassassin) --cf='config line' Additional line of configuration -x, --nocreate-prefs Don't create user preferences file -e, --exit-code Exit with a non-zero exit code if the @@ -239,7 +239,7 @@ =item B<--siteconfigpath>=I Use the specified path for locating site-specific configuration files. Ignore -the default directories (usually C or similar). +the default directories (usually C or similar). =item B<--cf='config line'> Index: spamassassin_release_3_3_2_rc_1/rules/user_prefs.template =================================================================== --- spamassassin_release_3_3_2_rc_1.orig/rules/user_prefs.template 2011-05-14 09:04:34.000000000 -0700 +++ spamassassin_release_3_3_2_rc_1/rules/user_prefs.template 2011-05-14 11:55:36.000000000 -0700 @@ -5,7 +5,7 @@ #* directory. At runtime, if a user has no preferences in their home directory #* already, it will be copied for them, allowing them to perform personalised #* customisation. If you want to make changes to the site-wide defaults, -#* create a file in /etc/spamassassin or /etc/mail/spamassassin instead. +#* create a file in /etc/spamassassin instead. ########################################################################### # How many points before a mail is considered spam. Index: spamassassin_release_3_3_2_rc_1/sa-compile.raw =================================================================== --- spamassassin_release_3_3_2_rc_1.orig/sa-compile.raw 2011-05-14 09:04:39.000000000 -0700 +++ spamassassin_release_3_3_2_rc_1/sa-compile.raw 2011-05-14 11:55:36.000000000 -0700 @@ -674,7 +674,7 @@ -p prefs, --prefspath=file, --prefs-file=file Set user preferences file --siteconfigpath=path Path for site configs - (default: /etc/mail/spamassassin) + (default: /etc/spamassassin) --updatedir=path Directory to place updates (default: @@LOCAL_STATE_DIR@@/compiled//@@VERSION@@) --cf='config line' Additional line of configuration @@ -736,7 +736,7 @@ =item B<--siteconfigpath>=I Use the specified path for locating site-specific configuration files. Ignore -the default directories (usually C or similar). +the default directories (usually C or similar). =item B<--updatedir> Index: spamassassin_release_3_3_2_rc_1/sa-learn.raw =================================================================== --- spamassassin_release_3_3_2_rc_1.orig/sa-learn.raw 2011-05-14 09:04:39.000000000 -0700 +++ spamassassin_release_3_3_2_rc_1/sa-learn.raw 2011-05-14 11:55:36.000000000 -0700 @@ -643,7 +643,7 @@ -p prefs, --prefspath=file, --prefs-file=file Set user preferences file --siteconfigpath=path Path for site configs - (default: /etc/mail/spamassassin) + (default: /etc/spamassassin) --cf='config line' Additional line of configuration -D, --debug [area=n,...] Print debugging messages -V, --version Print version @@ -800,7 +800,7 @@ =item B<--siteconfigpath>=I Use the specified path for locating site-specific configuration files. Ignore -the default directories (usually C or similar). +the default directories (usually C or similar). =item B<--cf='config line'> Index: spamassassin_release_3_3_2_rc_1/spamc/spamc.pod =================================================================== --- spamassassin_release_3_3_2_rc_1.orig/spamc/spamc.pod 2011-05-14 09:04:36.000000000 -0700 +++ spamassassin_release_3_3_2_rc_1/spamc/spamc.pod 2011-05-14 11:55:36.000000000 -0700 @@ -273,8 +273,8 @@ If the B<-F> switch is specified, that file will be used. Otherwise, C will attempt to load spamc.conf in C (default: -/etc/mail/spamassassin). If that file doesn't exist, and the B<-F> -switch is not specified, no configuration file will be read. +/etc/spamassassin). If that file doesn't exist, and the B<-F> switch +is not specified, no configuration file will be read. Example: Index: spamassassin_release_3_3_2_rc_1/spamd/README =================================================================== --- spamassassin_release_3_3_2_rc_1.orig/spamd/README 2011-05-14 09:04:39.000000000 -0700 +++ spamassassin_release_3_3_2_rc_1/spamd/README 2011-05-14 11:55:36.000000000 -0700 @@ -105,7 +105,7 @@ If you plan to use Bayesian classification (the BAYES rules) with spamd, you will need to either - 1. modify /etc/mail/spamassassin/local.cf to use a shared database of + 1. modify /etc/spamassassin/local.cf to use a shared database of tokens, by setting the 'bayes_path' setting to a path all users can read and write to. You will also need to set the 'bayes_file_mode' setting to 0666 so that created files are shared, too. Index: spamassassin_release_3_3_2_rc_1/spamd/README.vpopmail =================================================================== --- spamassassin_release_3_3_2_rc_1.orig/spamd/README.vpopmail 2011-05-14 09:04:39.000000000 -0700 +++ spamassassin_release_3_3_2_rc_1/spamd/README.vpopmail 2011-05-14 11:55:36.000000000 -0700 @@ -43,7 +43,7 @@ /home/vpopmail/domains/somedomain.net/4/userid/.spamassassin/user_prefs 5. One gotcha - cannot have personal AWL dbs - only a sitewide AWL will work. -This is specified in your /etc/mail/spamassassin/local.cf file. Perhaps a +This is specified in your /etc/spamassassin/local.cf file. Perhaps a future enhancement would be to add the capability to have personal AWL db. 6. Of course vpopmail must have the seekable patch installed (see Index: spamassassin_release_3_3_2_rc_1/spamd/spamd.raw =================================================================== --- spamassassin_release_3_3_2_rc_1.orig/spamd/spamd.raw 2011-05-14 09:04:39.000000000 -0700 +++ spamassassin_release_3_3_2_rc_1/spamd/spamd.raw 2011-05-14 11:55:36.000000000 -0700 @@ -2951,7 +2951,7 @@ =item B<--siteconfigpath>=I Use the specified path for locating site-specific configuration files. Ignore -the default directories (usually C or similar). +the default directories (usually C or similar). =item B<--cf='config line'> Index: spamassassin_release_3_3_2_rc_1/sql/README =================================================================== --- spamassassin_release_3_3_2_rc_1.orig/sql/README 2011-05-14 09:04:35.000000000 -0700 +++ spamassassin_release_3_3_2_rc_1/sql/README 2011-05-14 11:55:36.000000000 -0700 @@ -18,7 +18,7 @@ SQL preferences. SpamAssassin will check the global configuration file (ie. any file matching -/etc/mail/spamassassin/*.cf) for the following settings: +/etc/spamassassin/*.cf) for the following settings: user_scores_dsn DBI:driver:connection user_scores_sql_username dbusername Index: spamassassin_release_3_3_2_rc_1/sql/README.awl =================================================================== --- spamassassin_release_3_3_2_rc_1.orig/sql/README.awl 2011-05-14 09:04:35.000000000 -0700 +++ spamassassin_release_3_3_2_rc_1/sql/README.awl 2011-05-14 11:55:36.000000000 -0700 @@ -15,7 +15,7 @@ auto_whitelist_factory Mail::SpamAssassin::SQLBasedAddrList SpamAssassin will check the global configuration file (ie. any file -matching /etc/mail/spamassassin/*.cf) for the following settings: +matching /etc/spamassassin/*.cf) for the following settings: user_awl_dsn DBI:driver:database:hostname[:port] user_awl_sql_username dbusername Index: spamassassin_release_3_3_2_rc_1/t/data/testplugin.pm =================================================================== --- spamassassin_release_3_3_2_rc_1.orig/t/data/testplugin.pm 2011-05-14 09:04:37.000000000 -0700 +++ spamassassin_release_3_3_2_rc_1/t/data/testplugin.pm 2011-05-14 11:55:36.000000000 -0700 @@ -1,6 +1,6 @@ =head1 testplugin.pm -To try this out, write these lines to /etc/mail/spamassassin/plugintest.cf: +To try this out, write these lines to /etc/spamassassin/plugintest.cf: loadplugin myTestPlugin header MY_TEST_PLUGIN eval:check_test_plugin()