LARM is now maintained at http://larm.sourceforge.net/.

Author: Clemens Marschner

Revised: Apr. 11, 2003

This document describes the configuration parameters and the inner workings of the LARM web crawler contribution.

Note: There have been discussions about how the future of LARM could be. In this paper, which describes the original architecture or LARM, you can see it still has a lot of the shortcomings. The discussions have resulted in an effort to expand the LARM-crawler into a complete search engine. The project is still in its infancies: Contributions are very welcome. Please see the LARM pages in the Apache Wiki for details.

Purpose and Intended Audience

This document was made for Lucene developers, not necessarily with any background knowledge on crawlers, to understand the inner workings of the LARM crawler, the current problems and some directions for future development. The aim is to keep the entry costs low for people who have an interest in developing this piece of software further. It may also serve for actual users of the Lucene engine, but beware, since there is a lot that will change in the near future, especially the configuration.

Quick Start

The crawler is only accessible via anonymous CVS at this time. See the Jakarta CVS instructions for details if you're not familiar with CVS. Too long? The following will give you a quick start: create a new directory, say, "jakarta", make it your current directory, and type cvs -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic login password: anoncvs cvs -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic checkout jakarta-lucene-sandbox The crawler will then be in jakarta-lucene-sandbox/contributions/webcrawler-LARM. To compile it you will also need a copy of a current lucene-X.jar. You can get it from Jakarta's download pages. a working installation of ANT (1.5 or above recommended). ant.sh/.bat should be in your PATH After that you will need to tell ANT where the lucene.jar is located. This is done in the build.properties file. The easiest way to write one is to copy the build.properties.sample file in LARM's root directory and adapt the path. LARM needs a couple of other libraries which have been included in the libs/ directory. You shouldn't have to care about that. Some fixes had to be applied to the underlying HTTP library, the HTTPClient from Roland Tschalär. The patched jar was added to the libraries in the libs/ directory now. See the README file for details. Compiling should work simply by typing ant You should then have a working copy of LARM in build/webcrawler-LARM-0.5.jar. See the section Syntax below on how to start the crawler.

Why web crawlers at all?

Web crawlers became necessary because the web standard protocols didn't contain any mechanisms to inform search engines that the data on a web server had been changed. If this were possible, a search engine could be notified in a "push" fashion, which would simplify the total process and would make indexes as current as possible. Imagine a web server that notifies another web server that a link was created from one of its pages to the other server. That other server could then send a message back if the page was removed. On the other hand, handling this system would be a lot more complicated. Keeping distributed information up to date is an erroneous task. Even in a single relational database it is often complicated to define and handle dependencies between relations. Should it be possible to allow inconsistencies for a short period of time? Should dependent data be deleted if a record is removed? Handling relationships between clusters of information well incorporates a new level of complexity. In order to keep the software (web servers and browsers) simple, the inventors of the web concentrated on just a few core elements - URLs for (more or less) uniquely identifying distributed information, HTTP for handling the information, and HTML for structuring it. That system was so simple that one could understand it in a very short time. This is probably one of the main reasons why the WWW became so popular. Well, another one would probably be coloured, moving graphics of naked people. But the WWW has some major disadvantages: There is no single index of all available pages. Information can change without notice. URLs can point to pages that no longer exist. There is no mechanism to get "all" pages from a web server. The whole system is in a constant process of change. And after all, the whole thing is growing at phenomenal rates. Building a search engine on top of that is not something you can do on a Saturday afternoon. Given the sheer size, it would take months to search through all the pages in order to answer a single query, even if we had a means to get from server to server, get the pages from there, and search them. But we don't even know how to do that, since we don't know all the web servers. That first problem was addressed by bookmark collections, which soon became very popular. The most popular probably was Yahoo, which evolved to one of the most popular pages in the web just a year after it emerged from a college dorm room. The second problem was how to get the information from all those pages laying around. This is where a web crawler comes in. Ok, those engineers said, we are not able to get a list of all the pages. But almost every page contains links to other pages. We can save a page, extract all the links, and load all of these pages these links point to. If we start at a popular location which contains a lot of links, like Yahoo for example, chances should be that we can get "all" pages on the web. A little more formal, the web can be seen as a directional graph, with pages as nodes and links as edges between them. A web crawler, also called "spider" or "fetcher", uses the graph structure of the web to get documents in order to be able to index them. Since there is no "push" mechanism for updating our index, we need to "pull" the information on our own, by repeatedly crawling the web.

Implementation - the first attempt

"Easy", you may think now, "just implement what he said in the paragraph before." So you start getting a page, extracting the links, following all the pages you have not already visited. In Perl that can be done in a few lines of code. But then, very soon (I can tell you), you end up in a lot of problems: a server doesn't respond. Your program always wait for it to time out you get OutOfMemory errors soon after the beginning your hard drive fills up You notice that one page is loaded again time after time, because the URL changed a little Some servers will behave very strange. They will respond after 30 seconds, sometimes they time out, sometimes they are not accessible at all some URLs will get longer and longer. Suddenly you will get URLs with a length of thousands of characters. But the main problem will be: you notice that your network interface card (NIC) is waiting, and your CPU is waiting. What's going on? The overall process will take days

Features of the LARM crawler

The LARM web crawler is a result of experiences with the errors as mentioned above, connected with a lot of monitoring to get the maximum out of the given system resources. It was designed with several different aspects in mind: Speed. This involves balancing the resources to prevent bottlenecks. The crawler is multi-threaded. A lot of work went in avoiding synchronization between threads, i.e. by rewriting or replacing the standard Java classes, which slows down multi-threaded programs a lot Simplicity. The underlying scheme is quite modular and comprehensible. See the description of the pipeline below Power. The modular design and the ease of the Java language makes customisation simple Scalability. The crawler was supposed to be able to crawl large intranets with hundreds of servers and hundreds of thousands of documents within a reasonable amount of time. It was not meant to be scalable to the whole Internet. Java. Although there are many crawlers around at the time when I started to think about it (in Summer 2000), I couldn't find a good available implementation in Java. If this crawler would have to be integrated in a Java search engine, a homogeneous system would be an advantage. And after all, I wanted to see if a fast implementation could be done in this language.

What the crawler can do for you, and what it cannot (yet)

What it can do for you: Crawl a distinct set of the web, only restricted by a given regular expression all pages have to match. The pages are saved into page files of max. 50 MB (look at FetcherMain.java for details) and an index file that contains the links between the URL and the position in the page file. Links are logged as well. This is part of the standard LogStorage. Other storages exist as well (see below) Crawling is done breadth first. Hosts are accessed in a round-robin manner, to prevent the situation that all threads access one host at once. However, at the moment there is no means to throttle access to a server - the crawler works as fast as it can. There are also some problems with this technique, as will be described below. The main part of the crawler is implemented as a pool of concurrent threads, which speeds up I/O access The HTML link extractor has been optimised for speed. It was made 10 x faster than a generic SAX parser implementation A lot of logging and monitoring is done, to be able to track down the going-ons in the inside A lot of parts of the crawler have already been optimised to consume not more memory then needed. A lot of the internal queues are cached on hard drive, for example. Only the HashMap of already crawled pages and the HostInfo structures still completely remain in memory, thus limiting the number of crawled hosts and the number of crawled pages. At the moment, OutOfMemory errors are not prevented, so beware. URLs are passed through a pipeline of filters that limit, for example, the length of a URL, load robots.txt the first time a host is accessed, etc. This pipeline can be extended easily by adding a Java class to the pipeline. The storage mechanism is also pluggable. One of the next issues would be to include this storage mechanism into the pipeline, to allow a separation of logging, processing, and storage On the other hand, at the time of this writing, the crawler has not yet evolved into a production release. The reason is: until now, it just served me alone. These issues remain: Still, there's a relatively high memory overhead per server and also some overhead per page, especially since a map of already crawled pages is held in memory at this time. Although some of the in-memory structures are already put on disk, memory consumption is still linear to the number of pages crawled. We have lots of ideas on how to move that out, but since then, as an example with 500 MB RAM, the crawler scales up to some 100.000 files on some 100s of hosts. It's not polite. It sucks out the servers, which can impose DOS (Denial of Service) problems. We have plans to restrict concurrent server accesses to only one, but that's not yet implemented. Only some of the configuration can be done with command line parameters. The pipeline is put together in the startup procedure. Configuration will be done from within an XML file in the future. We are planning to use the Avalon framework for that. The ThreadMonitor is very experimental. It has evolved from a pure monitoring mechanism to a central part of the whole crawler. It should probably be refactored. Speed could still be optimized. Synchronization takes place too often. At the moment URLs and documents are passed one after each other. Should be changed such that groups of messages are passed in one turn. The Lucene integration is pretty experimental, and also pretty slow. It forms a major bottleneck if you use it. No processing whatsoever is done on the documents (except extracting the links). It should be decided how much of this is supposed to be done within the crawler, and what should be done in a post processing step. Unix is the favoured operating system. I used a SUSE Linux with 2.2 kernel. I remember that I ran into problems with the I/O routines on Windows machines. I haven't tried it for a long time now, though. Only http is supported, no file server crawling with recurse directory options, etc. I noticed on high bandwidth (100 MBit/s) systems that very slowly system sockets were eaten, although the Java code seemed to be ok.

Syntax and runtime behaviour

The command line options are very simple: java [-server] [-Xmx[ZZ]mb] -classpath <path-to-LARM.jar>:<paths-to-libs/*.jar>:<path-to-lucene> de.lanlab.larm.fetcher.FetcherMain [-start STARTURL | @STARTURLFILE]+ -restrictto REGEX [-threads[=10]] -hostresolver HOSTRES.PROPERTIES -start a start URL or, alternatively, a file with start URLs (one in each line). In the latter case the file name must be preceded by '@'. It must be a valid http-URL, including the http prefix -restrictto a (Perl5) regular expression that all URLs have to obey. These regexes are performed on the normalized version of a URL (see below). If you are not familiar with regular expressions, see The Perl Man Pages. -threads the number of concurrent threads that crawl the pages. At this time, more than 25 threads don't provide any advantages because synchronization effects and (probably) the overhead of the scheduler slow the system down Java runtime options: -server starts the hot spot VM in server mode, which starts up a little slower, but is faster during the run. Recommended -Xmx<ZZ>mb sets the maximum size of the heap to <ZZ> mb. Should be a lot. Set it to what you have. You may also want to have a look at the source code, because some options cannot be dealt with from the outside at this time. Other options Unfortunately, a lot of the options are still not configurable from the outside. Most of them are configured from within FetcherMain.java. You will have to edit this file if you want to change LARM's behavior. However, others are still spread over some of the other classes. At this time, we tried to put a "FIXME" comment around all these options, so check out the source code. What happens now? The filter pipeline is built. The ScopeFilter is initialised with the expression given by restrictto The URL is put into the pipeline The documents are fetched. If the mime type is text/html, links are extracted and put back into the queue. The documents and URLs are forwarded to the storage, which saves them Meanwhile, every 5 seconds, the ThreadMonitor gathers statistics, flushes log files, starts the garbage collection, and stops the fetcher when everything seems to be done: all threads are idle, and nothing is remaining in the queues

LARM's output files

LARM is by default configured such that it outputs a bunch of files into the logs/ directory. During the run it also uses a cachingqueue/ directory that holds temporary internal queues. This directory can be deleted if the crawler should be stopped before its operation has ended. Logfiles are flushed every time the ThreadMonitor is called, usually every 5 seconds. The logs/ directory keeps output from the LogStorage, which is a pretty verbose storage class, and the output from different filter classes (see below). Namely, in the default configuration, the directory will contain the following files after a crawl: links.log - contains the list of links. One record is a tab-delimited line. Format is [from-page] [to-page] [to-page-normalized] [link-type] [anchor-text]. link-type can be 0 (ordinary link), 1 (frame) or 2 (redirect). anchor text is the text between <a> and </a> tags or the ALT-Tag in case of IMG or AREA links. FRAME or LINK links don't contain anchor texts. pagefile_x.pfl - contains the contents of the downloaded files. Pagefiles are segments of max. 50 MB. Offsets are included in store.log. files are saved as-is. store.log - contains the list of downloaded files. One record is a tab-delimited line. Format is [from-page] [url] [url-normalized] [link-type] [HTTP-response-code] [MIME type] [file size] [HTML-title] [page file nr.] [offset in page file]. The attributes [from-page] and [link-type] refer to the first link found to this file. You can extract the files from the page files by using the [page file nr.], [offset] and [file size] attributes. thread(\n+)[|_errors].log - contain output of each crawling thread .*Filter.log - contain status messages of the different filters. ThreadMonitor.log - contains info from the ThreadMonitor. self-explanation is included in the first line of this file.

Normalized URLs

URLs are only supposed to make a web resource accessible. Unfortunately there can be more than one representation of a URL, which can cause a web crawler to save one file twice under different URLs. Two mechanisms are used to reduce this error, while at the same time trying to keep the second error (two URLs are regarded as pointing to the same file, but are in fact two different ones): Common URL patterns are reduced to a known "canonical" form. I. e. The URLs http://host and http://host/ point to the same file. The latter is defined as the canonical form of a root URL. For a complete listing of these actions, see below Host names can be edited through a set of rules manually passed to the HostResolver, which can be configured in a configuration file. The result is used like a stemming function in IR systems: The normalized form of a URL is used internally for comparisons, but to the outside (i.e. for accessing the file), the original form is applied.

URL patterns

These are the patterns applied by the URLNormalizer: Host and path names are changed to lowercase. We know that on Unix it may be possible to have two files in one directory that only differ in their cases, but we don't think this will be used very often. On the other hand, on Windows systems, case doesn't matter, so a lot of Links use URLs with mixed cases All characters except the ones marked 'safe' in the URL standard are escaped. Spaces are always escaped as "%20" and not "+" If Unicode characters are encountered, they are written as escaped UTF-8 characters. subsequent slashes '//' are removed. '/./' is reduced to '/' index.* and default.* file names are removed Todo: '/../' is not handled yet Todo: Examples

The Host Resolver

The host resolver is also applied when the URL normalization takes place. It knows three different types of rules: startsWith: replace the start of a URL with something else if a certain pattern is found at the start endsWith: same with the end synonym: treat a host name as a synonym to another These three rules are applied to each URL in that order. I. e. you can tell the host resolver to always remove the "www." of each host, therefore regarding "cnn.com" and "www.cnn.com" as equal, by defining the rule setStartsWith("www.","") Configuring HostResolver in a config file The HostResolver was one test on how config files could look like if they were implemented using standard Java procedures. We used the Jakarta BeanUtils for these matters (see The BeanUtils website for details) and implemented the HostResolver as a JavaBean. The rules can then be stated as "mapped properties" in a hostResolver.properties file (see the start syntax above). The only difference between normal properties and the mapped properties as supported by BeanUtils is that a second argument can be passed to the latter. An example of such a properties file would look like this: #hostResolver.properties #format: # startsWith(part1) = part2 # if host starts with part1, this part will be replaced by part2 # endsWith(part1) = part2 # if host ends with part1, this part will be replaced by part2. # This is done after startsWith was processed # synonym(host1) = host2 # the keywords startsWith, endsWith and synonym are case sensitive # host1 will be replaced with host2. this is done _after_ startsWith # and endsWith was processed startsWith(www.)= startsWith(www2.)= startsWith(w3.)= endsWith(.somehost.com)=.somhost2.com synonym(daedalus.apache.org)=apache.org As you can see, the file format itself is like the standard Java Properties format (comments etc.). Keywords are case sensitive. At the time when the class was written, BeanUtils still had a bug that dots "." were not supported in mapped properties indexes. As with the new version (1.5 at the time of this writing) this is supposed to be removed, but I have not tried yet. Therefore, the comma "," was made a synonym for dots. Since "," is not allowed in domain names, you can still use (and even mix) them if you want, or if you only have an older BeanUtils version available.

LARM currently provides a very simple LuceneStorage that allows for integrating the crawler with Lucene. It's meant to be a working example on how this can be accomplished, not a final implementation. If you like to volunteer on that part, contributions are welcome.

The current storage simply takes the input that comes from the crawler (a WebDocument which mainly consists of name/value pairs with the document's contents) and puts it into a Lucene index. Each name/value pair is put into one field. There's currently no incremental or update operation, or document caching via a RAMDirectory. Therefore the LuceneStorage becomes a bottleneck even with slow network connections.

see storage/LuceneStorage.java and fetcher/FetcherMain.java for details

I studied the Mercator web crawler but decided to implement a somewhat different architecture. Here is a high level overview of the default configuration:

The message handler is an implementation of a simple chain of responsibility. Implementations of Message are passed down a filter chain. Each of the filters can decide whether to send the message along, change it, or even delete it. In this case, Messages of type URLMessage are used. The message handler runs in its own thread. Thus, a call of putMessage() or putMessages() resp. involve a producer-consumer-like message transfer. The filters themselves run within the message handler thread. At the end of the pipeline the Fetcher distributes the incoming messages to its worker threads. They are implemented as a thread pool: Several ServerThreads are running concurrently and wait for Tasks which include the procedure to be executed. If more tasks are to be done than threads are available, they are kept in a queue, which will be read whenever a task is finished.

At this point the pipeline pattern is left . The FetcherTask itself is still quite monolithic. It gets the document, parses it if possible, and stores it into a storage. In the future one might think of additional configurable processing steps within another processing pipeline. I thought about incorporating it into the filter pipeline, but since the filters are passive components and the FetcherThreads are active, this didn't work.

Performance

The performance was improved about 10-15 times compared to the first naive attempts with a pre-built parser and Sun's network classes. And there is still room left. On a network with about 150 web servers, which the crawler server was connected to by a 100 MBit FDDS connection, I was able to crawl an average of 60 documents per second, or 3,7 MB, after 10 minutes in the startup period. In this first period, crawling is slower because the number of servers is small, so the server output limits crawling. There may also be servers that don't respond. They are excluded from the crawl after a few attempts. Overall, performance is affected by a lot of factors: The operating system, the native interface, the Java libraries, the web servers, the number of threads, whether dynamic pages are included in the crawl, etc. From a development side, the speed is affected by the balance between I/O and CPU usage. Both has to be kept at 100%, otherwise one of them becomes the bottleneck. Managing these resources is the central part of a crawler. Imagine that only one thread is crawling. This is the worst case, as can be seen very fast: The diagram to the right resembles a UML sequence diagram, except that it stresses the time that a message needs to traverse the network. The URL is processed somehow. That's the filter part as stated above The request is sent. It goes through the different network layers of the crawler server. A TCP/IP connection is established. Several packets are sent back and forth. Then the crawler waits until the web server processes the request, looks up the file or renders the page (which can take several seconds or even minutes), then sends the file to the crawler. The crawler receives packet after packet, combines them to a file. Probably it is copied through several buffers until it is complete. This will take some CPU time, but mostly it will wait for the next packet to arrive. The network transfer by itself is also affected by a lot of factors, i.e. the speed of the web server, acknowledgment messages, resent packages etc. so 100% network utilization will almost never be reached. The document is processed, which will take up the whole CPU. The network will be idle at that time. The storage process, which by itself uses CPU and disk I/O resources, was left out here. That process will be very similar, although the traversal will be faster. As you can see, both CPU and I/O are not used most of the time, and wait for the other one (or the network) to complete. This is the reason why single threaded web crawlers tend to be very slow (wget for example). The slowest component always becomes the bottleneck. Two strategies can be followed to improve this situation: use asynchronous I/O use several threads Asynchronous I/O means, I/O requests are sent, but then the crawler continues to process documents it has already crawled. Actually I haven't seen an implementation of this technique. Asynchronous I/O was not available in Java until version 1.4. An advantage would be that thread handling is also an expensive process in terms of CPU and memory usage. Threads are resources and, thus, limited. I heard that application server developers wanted asynchronous I/O, to be able to cope with hundreds of simultaneous requests without spawning extra threads for each of them. Probably this can be a solution in the future. But from what I know about it today, it will not be necessary The way this problem is solved usually in Java is with the use of several threads. If many threads are used, chances are good that at any given moment, at least one thread is in one of the states above, which means both CPU and I/O will be at a maximum. The problem with this is that multi threaded programming is considered to be one of the most difficult areas in computer science. But given the simple linear structure of web crawlers, it is not very hard to avoid race conditions or dead lock problems. You always get into problems when threads are supposed to access shared resources, though. Don't touch this until you have read the standard literature and have made at least 10 mistakes (and solved them!). Multi-threading doesn't come without a cost, however. First, there is the cost of thread scheduling. I don't have numbers for that in Java, but I suppose that this should not be very expensive. MutExes can affect the whole program a lot . I noticed that they should be avoided like hell. In a crawler, a MutEx is used, for example, when a new URL is passed to the thread, or when the fetched documents are supposed to be stored linearly, one after the other. For example, the tasks used to insert a new URL into the global message handler each time when a new URL was found in the document. I was able to speed it up considerably when I changed this so that the URLs are collected locally and then inserted only once per document. Probably this can be augmented even further if each task is comprised of several documents which are fetched one after the other and then stored together. Nonetheless, keeping the right balance between the two resources is a big concern. At the moment, the number of threads and the number of processing steps is static, and is only optimised by trial and error. Few hosts, slow network -> few threads. slow CPU -> few processing steps. many hosts, fast network -> many threads. Probably those heuristics will do well, but I wonder if these figures could also be fine-tuned dynamically during runtime. Another issue that was optimised were very fine-grained method calls. For example, the original implementation of the HTML parser used to call the read()-method for each character. This call had probably to traverse several Decorators until it got to a - synchronized call. That's why the CharArrayReader was replaced by a SimpleCharArrayReader, because only one thread works on a document at a time. These issues can only be traced down with special tools, i.e. profilers. The work is worth it, because it allows one to work on the 20% of the code that costs 80% of the time.

Memory Usage

One "web crawler law" could be defined as: What can get infinite, will get infinite. What can go wrong, will go wrong. Eventually. Very soon. A major task during the development was to get memory usage low. But a lot of work still needs to be done here. Most of the optimizations incorporated now move the problem from main memory to the hard disk, which doesn't solve the problem. Here are some means that were used: CachingQueues: The message queue, the Fetcher queue, the robot exclusion queue (see below) - a lot of queues can fill up the whole main memory in a very short period of time. But since queues are only accessed at their ends, a very simple mechanism was implemented to keep memory usage low: The queue was divided into blocks of fixed size. Only the two blocks at its end are kept in RAM. The rest is serialized on disk. In the end, only a list of block references has to be managed Define a maximum value for everything, and keep an eye on it. Downloaded files can get "infinitely" large. URLs can get infinitely long. Servers may contain an infinite set of documents. A lot of these checks had to be included even in the university network mentioned. A special case were the URLs. Some .shtml pages on a web server pointed to a subdirectory that didn't exist but revealed the same page. If these errors are introduced at will, they are called crawler traps: An infinite URL space. The only way of dealing with this is manually excluding the hosts. Optimized HTML parser. Current parsers tend to create a huge amount of very small objects. Most of that work is unnecessary for the task to be done. This can only be optimised by stripping down the parser to do only what it is supposed to do in that special task. However, there still remains a problem: The HashMap of already visited URLs needs to be accessed randomly while reading and writing. I can imagine only two ways to overcome this: Limiting, in some way, the number of URLs in RAM. If the crawler were distributed, this could be done by assigning only a certain number of hosts to each crawler node, while at the same time limiting the number of pages read from one host. In the end this will only limit the number of hosts that can be crawled by the number of crawler nodes available. Another solution would be to store complete hosts on drive, together with the list of unresolved URLs. Again, this shifts the problem only from RAM to the hard drive Something worth while would be to compress the URLs. A lot of parts of URLs are the same between hundreds of URLs (i.e. the host name). And since only a limited number of characters are allowed in URLs, Huffman compression will lead to a good compression rate . A first attempt would be to incorporate the visited URLs hash into the HostInfo structure. After all, the VisitedFilter hash map turned out to be the data structure that will take up most of the RAM after some time.

The Filters

Most of the functionality of the different filters has already been described. Here's another, more detailed view : RobotExclusionFilter The first implementation of this filter just kept a list of hosts, and every time a new URLMessage with an unknown host came by, it attempted to read the robots.txt file first to determine whether the URL should be filtered. A major drawback of that was that when the server was not accessible somehow, the whole crawler was held until the connection timed out (well with Sun's classes that even didn't happen, causing the whole program to die). The second implementation has its own little ThreadPool, and keeps a state machine of each host in the HostInfo structure. If the host manager doesn't contain a HostInfo structure at all, the filter creates it and creates a task to get the robots.txt file. During this time, the host state is set to "isLoadingRobotsTxt", which means further requests to that host are put into a queue. When loading is finished, these URLs (and all subsequent ones) are put back to the beginning of the queue. After this initial step, every URL that enters the filter is compared to the disallow rules set (if present), and is filtered if necessary. Since the URLs are put back to the beginning of the queue, the filter has to be put in front of the VisitedFilter. In the host info structure, which is also used by the FetcherTasks, some information about the health of the hosts is stored as well. If the server is in a bad state several times, it is excluded from the crawl. Note that it is possible that a server will be accessed more than the (predefined) 5 times that it can time out, since a FetcherThread may already have started to get a document when another one marks it as bad. URLLengthFilter This very simple filter just filters a URL if a certain (total) length is exceeded KnownPathsFilter This one filters some very common URLs (i.e. different views of an Apache directory index), or hosts known to make problems. Should be more configurable from outside in the future URLScopeFilter The scope filter filters a URL if it doesn't match a given regular expression. URLVisitedFilter This filter keeps a HashMap of already visited URLs, and filters out what it already knows Fetcher The fetcher itself is also a filter that filters all URLs - they are passed along to the storage as WebDocuments, in a different manner. It contains a ThreadPool that runs in its own thread of control, which takes tasks from the queue an distributes them to the different FetcherThreads. In the first implementation the fetcher would simply distribute the incoming URLs to the threads. The thread pool would use a simple queue to store the remaining tasks. But this can lead to a very "impolite" distribution of the tasks: Since ¾ of the links in a page point to the same server, and all links of a page are added to the message handler at once, groups of successive tasks would all try to access the same server, probably causing denial of service, while other hosts present in the queue are not accessed. To overcome this, the queue is divided into different parts, one for each host. Each host contains its own (caching) queue. But the methods used to pull tasks from the "end" of this queue cycle through the hosts and always get a URL from a different host. One major problem still remains with this technique: If one host is very slow, it can still slow down everything. Since with n host every nth task will be accessed to this host, it can eat one thread after the other if loading a document takes longer than loading it from the (n-1) other servers. Then two concurrent requests will result on the same server, which slows down the response times even more, and so on. In reality, this will clog up the queue very fast. A little more work has to be done to avoid these situations, i.e. by limiting the number of threads that access one host at a time. A Note on DNS The Mercator crawler document stresses a lot on resolving host names. Because of that, a DNSResolver filter was implemented in the very first time. Two reasons prevented that it is used any more: newer versions of the JDK than the one Mercator used resolve the IP address of a host the first time it is accessed, and keep a cache of already resolved host names. the crawler itself was designed to crawl large local networks, and not the Internet. Thus, the number of hosts is very limited.

Politeness

A crawler should not cause a Denial of Service attack. So this has to be addressed.

The processing pipeline

The FetcherTask, as already stated, is very monolithic at this time. Probably some more processing should be done at this step (the problem with balanced CPU/IO usage taken into account). At least different handlers for different mime types should be provided, i.e. to extract links from PDF documents. The Storage should also be broken up. I only used the LogStorage within the last months, which now doesn't only writes to log files, but also stored the files on disk. This should probably be replaced by a storage chain where different stores could be appended.

LARM as a real server

The only way to start a crawl today is starting the crawler from the shell. But it could also remain idle and wait for commands from an RMI connection or expose a Web Service. Monitoring could be done by a simple included web server that provides current statistics via HTML Recommended Reading: We plan on using the Avalon Framework for state management and configuration. A very early proposal can be found here. We found out that Avalon provides a lot of the functionality described as necessary in that posting.

Distribution

Distribution is a big issue. Some people say "Distribute your program late. And then later." But as others have implemented distributed crawlers, this should not be very hard. I see two possible architectures for that: Write a single dispatcher (a star network) that contains the whole MessageHandler except the Fetcher itself. The crawlers are run as servers (see above), and are configured with a URL source that gets their input from the dispatcher and a MessageHandler that stores URLs back to the dispatcher. The main drawback being that this can become a bottleneck. Partition the domain to be crawled into several parts. This could be done for example by dividing up different intervals of the hash value of the host names. Then plugging in another crawler could be done dynamically, even within a peer to peer network. Each node knows which node is responsible for which interval, and sends all URLs to the right node. This could even be implemented as a filter. One thing to keep in mind is that the transfer of URLs to other nodes should be done in batches with hundreds or thousands or more URLs per batch. The next thing to be distributed is the storage mechanism. Here, the number of pure crawling nodes and the number of storing (post processing) nodes could possibly diverge. An issue here is that the whole documents have to be transferred over the net. Recommended Reading: Junghoo Cho and Hector Garcia-Molina (2002). Parallel crawlers. In Proc. of the 11th International World--Wide Web Conference, 2002

URL Reordering

One paper discussed different types of reordering URLs while crawling . One of the most promising attempts was to take the calculated PageRank into account . Crawling pages with higher PageRanks first seemed to get important pages earlier. This is not rocket science, the research was already done years ago. Recommended Reading: J. Cho, H. Garcia-Molina & L. Page (1998), Efficient Crawling Through URL Ordering, Seventh International Web Conference, Brisbane, Australia, 14-18 April

Recovery

At the moment there is no way of stopping and restarting a crawl. There should be a mechanism to move the current state of the crawler to disk, and, in case of a failure, to recover and continue from the last saved state.