################################################################################
# Apache JMeter Property file
################################################################################

##   $Id$
##   Copyright 2001-2004 The Apache Software Foundation
## 
##   Licensed under the Apache License, Version 2.0 (the "License");
##   you may not use this file except in compliance with the License.
##   You may obtain a copy of the License at
## 
##       http://www.apache.org/licenses/LICENSE-2.0
## 
##   Unless required by applicable law or agreed to in writing, software
##   distributed under the License is distributed on an "AS IS" BASIS,
##   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
##   See the License for the specific language governing permissions and
##   limitations under the License.


#Preferred GUI language. Comment out to use the JVM default locale's language.
#language=de

# Netscape HTTP Cookie file
cookies=cookies

# Authorization
authorization=authorization

#Working directory
user.dir=.

# XML Reader(Parser) - Must implement SAX 2 specs
xml.parser=org.apache.xerces.parsers.SAXParser

#Classname of the ssl provider to be used (to enable testing of https urls)
#And the package name where Stream Handlers can be found
#These provided defaults can be uncommented, and they will work if you are using
#Sun's JSSE implementation.

ssl.provider=com.sun.net.ssl.internal.ssl.Provider
#ssl.provider=iaik.security.jsse.provider.IAIKJSSEProvider
ssl.pkgs=com.sun.net.ssl.internal.www.protocol

#The location of the truststore (trusted certificates) and keystore ( if other than the default.
#you can uncomment this and change the path to the correct location.
#javax.net.ssl.trustStore=/path/to/cacerts
#javax.net.ssl.keyStore=/path/to/keystore

#The password to your keystore
#javax.net.ssl.keyStorePassword=password

#Alternative protocol of the ssl provider for IAIK JCE + iSaSiLk
#You can also override IAIK specific Providers as well.

#ssl.pkgs=iaik.protocol
#ssl.provider=com.mycompany.security.provider.SmartProvider
#iaik.provider=com.mycompany.security.provider.SmartSSLProvider

#Flag for whether to output debug messages to System.err
#To enable it, set the value to "all"  Note, for it to work with
#JSSE, it needs to be done from the Java command (i.e. -Djavax.net.debug=all)
javax.net.debug=all

#Classname of the Swing default UI
#Installed Look and Feel classes on Windows are:
#  Metal   = javax.swing.plaf.metal.MetalLookAndFeel
#  Motif   = com.sun.java.swing.plaf.motif.MotifLookAndFeel
#  Windows = com.sun.java.swing.plaf.windows.WindowsLookAndFeel
jmeter.laf=javax.swing.plaf.metal.MetalLookAndFeel

#icons -> moved to program code
#timer.tree.icon=timer.gif
#listener.tree.icon=ear.gif
#bench.tree.icon=clipboard.gif
#thread.tree.icon=thread.gif
#control.tree.icon=knob.gif
#plan.tree.icon=beaker.gif
#config.tree.icon=leafnode.gif

# Remote Hosts - comma delimited
remote_hosts=127.0.0.1

#Components to not display in JMeter GUI
not_in_menu=Remote Method Configuration,JNDI Configuration,JNDI Lookup Configuration,JNDI Request,Default Controller,org.apache.jmeter.control.DynamicController, org.apache.jmeter.protocol.http.control.Cookie,org.apache.jmeter.protocol.http.control.Authorization,org.apache.jmeter.config.LoginConfig,Header,org.apache.jmeter.protocol.http.config.MultipartUrlConfig

#---------------------------------------------------------------------------
#         Logging Configuration
#---------------------------------------------------------------------------

# Note: JMeter uses Avalon LogKit

# Logging Format
# see http://avalon.apache.org/logkit/api/org/apache/log/format/PatternFormatter.html
#
# Default format:
#log_format=%{time:yyyy/MM/dd HH:mm:ss} %5.5{priority} - %{category}: %{message} %{throwable}
# \n is automatically added to the end of the string
#
# Predefined formats in the JMeter LoggingManager:
#log_format_type=default
#log_format_type=thread_prefix
#log_format_type=thread_suffix
# default is as above
# thread_prefix adds the thread name as a prefix to the category
# thread_suffix adds the thread name as a suffix to the category
# Note that thread name is not included by default, as it requires extra processing.
#
# To change the logging format, define either log_format_type or log_format
# If both are defined, the type takes precedence
# Note that these properties cannot be defined using the -J or -D JMeter
# command-line flags, as the format will have already been determined by then
# However, they can be defined as JVM properties

#Logging levels for the logging categories in JMeter.  Correct values are FATAL_ERROR, ERROR, WARN, INFO, and DEBUG
# To set the log level for a package or individual class, use:
# log_level.[package_name].[classname]=[PRIORITY_LEVEL]
# But omit "org.apache" from the package name.  The classname is optional.  Further examples below.

log_level.jmeter=INFO
log_level.jmeter.junit=DEBUG
#log_level.jmeter.engine=WARN
#log_level.jmeter.gui=WARN
#log_level.jmeter.testelement=DEBUG
#log_level.jmeter.util=WARN
#log_level.jmeter.util.classfinder=WARN
#log_level.jmeter.test=DEBUG
log_level.jmeter.protocol.http=DEBUG
#log_level.jmeter.protocol.ftp=WARN
#log_level.jmeter.protocol.jdbc=WARN
#log_level.jmeter.protocol.java=WARN
#log_level.jmeter.testelements.property=DEBUG
log_level.jorphan=INFO

#Log file for log messages.
# You can specify a different log file for different categories via:
# log_file.[category]=[filename]
# category is equivalent to the package/class names described above

# Combined log file (for jmeter and jorphan)
log_file=jmeter.log
# To redirect logging to standard output, try the following:
# (it will probably report an error, but output will be to stdout)
#log_file=

# Or define separate logs if required:
#log_file.jorphan=jorphan.log
#log_file.jmeter=jmeter.log

# Sample logging levels for HttpClient
# Note that full category names are used, i.e. must include the org.apache.
# Info level produces no output:
#log_level.org.apache.commons.logging=debug
# Might be useful:
#org.apache.commons.httpclient.Authenticator=trace 

# wire debug produces a lot of output; consider using separate file:
#log_level.httpclient.wire=debug
#log_file.httpclient=httpclient.log

# Further logging configuration
# Excalibur logging provides the facility to configure logging using
# configuration files written in XML. This allows for such features as
# log file rotation which are not supported directly by JMeter.
#
# If such a file specified, it will be applied to the current logging
# hierarchy when that has been created.
# 
#log_config=logkit.xml

#---------------------------------------------------------------------------
# Results file configuration
#---------------------------------------------------------------------------

# This section helps determine how result data will be saved.
# The commented out values are the defaults.

# legitimate values: xml, csv, db.  Only xml and csv are currently supported.
jmeter.save.saveservice.output_format=xml


# true when field should be saved; false otherwise

# assertion_results_failure_message only affects CSV output
#jmeter.save.saveservice.assertion_results_failure_message=true
#jmeter.save.saveservice.data_type=true
#jmeter.save.saveservice.label=true
#jmeter.save.saveservice.response_code=true
#jmeter.save.saveservice.response_data=false
#jmeter.save.saveservice.response_message=true
#jmeter.save.saveservice.successful=true
#jmeter.save.saveservice.thread_name=true
#jmeter.save.saveservice.time=true

# legitimate values: none, ms, or a format suitable for SimpleDateFormat
#jmeter.save.saveservice.timestamp_format=ms
#jmeter.save.saveservice.timestamp_format=MM/dd/yy HH:mm:ss

# legitimate values: none, first, all
#jmeter.save.saveservice.assertion_results=none

# For use with Comma-separated value (CSV) files or other formats
# where the fields' values are separated by specified delimiters.
#jmeter.save.saveservice.default_delimiter=,
#jmeter.save.saveservice.print_field_names=true

# File that holds a record of name changes for backward compatibility issues
upgrade_properties=/bin/upgrade.properties

# If the proxy detects a gap of at least 1s (default) between HTTP requests,
# it assumes that the user has clicked a new URL
#proxy.pause=1000

# Add numeric prefix to Sampler names (default false)
#proxy.number.requests=true
#
# Define the HTML parser to be used.
# Default parser:
#htmlParser.className=org.apache.jmeter.protocol.http.parser.HtmlParserHTMLParser
# Other parsers:
#htmlParser.className=org.apache.jmeter.protocol.http.parser.JTidyHTMLParser
#htmlParser.className=org.apache.jmeter.protocol.http.parser.RegexpHTMLParser

# Put the start time stamp in logs instead of the end
#sampleresult.timestamp.start=true

# Turn expert mode on/off: expert mode will show expert-mode beans and properties
#jmeter.expertMode=true

# To set the buffer size, enter the desired value
# monitor.buffer.size=800