Apache HTTP Server Version 2.3
Apache HTTP Server Version 2.3
| Description: | Content cache keyed to URIs. |
|---|---|
| Status: | Extension |
| Module Identifier: | cache_module |
| Source File: | mod_cache.c |
CacheQuickHandler directive is
in its default value of on, the Allow and Deny directives will be circumvented.
You should not enable quick handler caching for any content to which you
wish to limit access by client host name, address or environment
variable.mod_cache implements an RFC 2616 compliant HTTP
content cache that can be used to cache either local or proxied content.
mod_cache requires the services of one or more storage
management modules. One storage management module is included in
the base Apache distribution:
mod_disk_cacheContent is stored in and retrieved from the cache using URI based keys. Content with access protection is not cached.
Further details, discussion, and examples, are provided in the Caching Guide.
CacheDefaultExpire CacheDisable CacheEnable CacheIgnoreCacheControl CacheIgnoreHeaders CacheIgnoreNoLastMod CacheIgnoreQueryString CacheIgnoreURLSessionIdentifiers CacheLastModifiedFactor CacheLock CacheLockMaxAge CacheLockPath CacheMaxExpire CacheMinExpire CacheQuickHandler CacheStoreNoStore CacheStorePrivate Related Modules and Directives Sample Configuration Avoiding the Thundering Herd Fine Control with the CACHE Filter
| Related Modules | Related Directives |
|---|---|
#
# Sample Cache Configuration
#
LoadModule cache_module modules/mod_cache.so
<IfModule mod_cache.c>
LoadModule disk_cache_module modules/mod_disk_cache.so
<IfModule mod_disk_cache.c>
CacheRoot c:/cacheroot
CacheEnable disk /
CacheDirLevels 5
CacheDirLength 3
</IfModule>
# When acting as a proxy, don't cache the list of security updates
CacheDisable http://security.update.server/update-list/
</IfModule>
When a cached entry becomes stale, mod_cache will submit
a conditional request to the backend, which is expected to confirm whether the
cached entry is still fresh, and send an updated entity if not.
A small but finite amount of time exists between the time the cached entity becomes stale, and the time the stale entity is fully refreshed. On a busy server, a significant number of requests might arrive during this time, and cause a thundering herd of requests to strike the backend suddenly and unpredicably.
To keep the thundering herd at bay, the CacheLock
directive can be used to define a directory in which locks are created for
URLs in flight. The lock is used as a hint
by other requests to either suppress an attempt to cache (someone else has
gone to fetch the entity), or to indicate that a stale entry is being refreshed
(stale content will be returned in the mean time).
When an entity is cached for the first time, a lock will be created for the entity until the response has been fully cached. During the lifetime of the lock, the cache will suppress the second and subsequent attempt to cache the same entity. While this doesn't hold back the thundering herd, it does stop the cache attempting to cache the same entity multiple times simultaneously.
When an entity reaches its freshness lifetime and becomes stale, a lock will be created for the entity until the response has either been confirmed as still fresh, or replaced by the backend. During the lifetime of the lock, the second and subsequent incoming request will cause stale data to be returned, and the thundering herd is kept at bay.
Locks are used as a hint only to enable the cache to be more gentle on backend servers, however the lock can be overridden if necessary. If the client sends a request with a Cache-Control header forcing a reload, any lock that may be present will be ignored, and the client's request will be honoured immediately and the cached entry refreshed.
As a further safety mechanism, locks have a configurable maximum age.
Once this age has been reached, the lock is removed, and a new request is
given the opportunity to create a new lock. This maximum age can be set using
the CacheLockMaxAge directive, and defaults to 5
seconds.
#
# Enable the cache lock
#
<IfModule mod_cache.c>
CacheLock on
CacheLockPath /tmp/mod_cache-lock
CacheLockMaxAge 5
</IfModule>
Under the default mode of cache operation, the cache runs as a quick handler, short circuiting the majority of server processing and offering the highest cache performance available.
In this mode, the cache bolts onto the front of the server, acting as if a free standing RFC2616 caching proxy had been placed in front of the server.
While this mode offers the best performance, the administrator may find that under certain circumstances they may want to perform further processing on the request after the request is cached, such as to inject personalisation into the cached page, or to apply authorisation restrictions to the content. Under these circumstances, an administrator is often forced to place independent reverse proxy servers either behind or in front of the caching server to achieve this.
To solve this problem the CacheQuickHandler
directive can be set to off, and the server will
process all phases normally handled by a non-cached request, including the
authentication and authorisation phases.
In addition, the administrator may optionally specify the precise point within the filter chain where caching is to take place by adding the CACHE filter to the output filter chain.
For example, to cache content before applying compression to the response, place the CACHE filter before the DEFLATE filter as in the example below:
# Cache content before optional compression
CacheQuickHandler off
AddOutputFilterByType CACHE;DEFLATE text/plain
Another option is to have content cached before personalisation is applied
by mod_include (or another content processing filter). In this
example templates containing tags understood by
mod_include are cached before being parsed:
# Cache content before mod_include and mod_deflate
CacheQuickHandler off
AddOutputFilterByType CACHE;INCLUDES;DEFLATE text/html
You may place the CACHE filter anywhere you wish within the
filter chain. In this example, content is cached after being parsed by
mod_include, but before being processed by
mod_deflate:
# Cache content between mod_include and mod_deflate
CacheQuickHandler off
AddOutputFilterByType INCLUDES;CACHE;DEFLATE text/html
mod_cache is not in a position
to enforce this for you.| Description: | The default duration to cache a document when no expiry date is specified. |
|---|---|
| Syntax: | CacheDefaultExpire seconds |
| Default: | CacheDefaultExpire 3600 (one hour) |
| Context: | server config, virtual host |
| Status: | Extension |
| Module: | mod_cache |
The CacheDefaultExpire directive specifies a default time,
in seconds, to cache a document if neither an expiry date nor last-modified date are provided
with the document. The value specified with the CacheMaxExpire
directive does not override this setting.
CacheDefaultExpire 86400
| Description: | Disable caching of specified URLs |
|---|---|
| Syntax: | CacheDisable url-string | on |
| Context: | server config, virtual host |
| Status: | Extension |
| Module: | mod_cache |
The CacheDisable directive instructs
mod_cache to not cache urls at or below
url-string.
CacheDisable /local_files
If used in a <Location> directive,
the path needs to be specified below the Location, or if the word "on"
is used, caching for the whole location will be disabled.
<Location /foo>
CacheDisable on
</Location>
The no-cache environment variable can be set to
disable caching on a finer grained set of resources in versions
2.2.12 and later.
| Description: | Enable caching of specified URLs using a specified storage manager |
|---|---|
| Syntax: | CacheEnable cache_type url-string |
| Context: | server config, virtual host |
| Status: | Extension |
| Module: | mod_cache |
The CacheEnable directive instructs
mod_cache to cache urls at or below
url-string. The cache storage manager is specified with the
cache_type argument. If the CacheEnable
directive is placed inside a <Location>
directive, the url-string becomes optional.
cache_type disk instructs
mod_cache to use the disk based storage manager
implemented by mod_disk_cache.
In the event that the URL space overlaps between different
CacheEnable directives (as in the example below),
each possible storage manager will be run until the first one that
actually processes the request. The order in which the storage managers are
run is determined by the order of the CacheEnable
directives in the configuration file.
When acting as a forward proxy server, url-string can also be used to specify remote sites and proxy protocols which caching should be enabled for.
# Cache proxied url's
CacheEnable disk /
# Cache FTP-proxied url's
CacheEnable disk ftp://
# Cache content from www.apache.org
CacheEnable disk http://www.apache.org/
A hostname starting with a "*" matches all hostnames with that suffix. A hostname starting with "." matches all hostnames containing the domain components that follow.
# Match www.apache.org, and fooapache.org
CacheEnable disk http://*apache.org/
# Match www.apache.org, but not fooapache.org
CacheEnable disk http://.apache.org/
The no-cache environment variable can be set to
disable caching on a finer grained set of resources in versions
2.2.12 and later.
| Description: | Ignore request to not serve cached content to client |
|---|---|
| Syntax: | CacheIgnoreCacheControl On|Off |
| Default: | CacheIgnoreCacheControl Off |
| Context: | server config, virtual host |
| Status: | Extension |
| Module: | mod_cache |
Ordinarily, requests containing a Cache-Control: no-cache or
Pragma: no-cache header value will not be served from the cache. The
CacheIgnoreCacheControl directive allows this
behavior to be overridden. CacheIgnoreCacheControl On
tells the server to attempt to serve the resource from the cache even
if the request contains no-cache header values. Resources requiring
authorization will never be cached.
CacheIgnoreCacheControl On
| Description: | Do not store the given HTTP header(s) in the cache. |
|---|---|
| Syntax: | CacheIgnoreHeaders header-string [header-string] ... |
| Default: | CacheIgnoreHeaders None |
| Context: | server config, virtual host |
| Status: | Extension |
| Module: | mod_cache |
According to RFC 2616, hop-by-hop HTTP headers are not stored in
the cache. The following HTTP headers are hop-by-hop headers and thus
do not get stored in the cache in any case regardless of the
setting of CacheIgnoreHeaders:
ConnectionKeep-AliveProxy-AuthenticateProxy-AuthorizationTETrailersTransfer-EncodingUpgradeCacheIgnoreHeaders specifies additional HTTP
headers that should not to be stored in the cache. For example, it makes
sense in some cases to prevent cookies from being stored in the cache.
CacheIgnoreHeaders takes a space separated list
of HTTP headers that should not be stored in the cache. If only hop-by-hop
headers not should be stored in the cache (the RFC 2616 compliant
behaviour), CacheIgnoreHeaders can be set to
None.
CacheIgnoreHeaders Set-Cookie
CacheIgnoreHeaders None
Expires which are needed for proper cache
management are not stored due to a
CacheIgnoreHeaders setting, the behaviour of
mod_cache is undefined.
| Description: | Ignore the fact that a response has no Last Modified header. |
|---|---|
| Syntax: | CacheIgnoreNoLastMod On|Off |
| Default: | CacheIgnoreNoLastMod Off |
| Context: | server config, virtual host |
| Status: | Extension |
| Module: | mod_cache |
Ordinarily, documents without a last-modified date are not cached.
Under some circumstances the last-modified date is removed (during
mod_include processing for example) or not provided
at all. The CacheIgnoreNoLastMod directive
provides a way to specify that documents without last-modified dates
should be considered for caching, even without a last-modified date.
If neither a last-modified date nor an expiry date are provided with
the document then the value specified by the
CacheDefaultExpire directive will be used to
generate an expiration date.
CacheIgnoreNoLastMod On
| Description: | Ignore query string when caching |
|---|---|
| Syntax: | CacheIgnoreQueryString On|Off |
| Default: | CacheIgnoreQueryString Off |
| Context: | server config, virtual host |
| Status: | Extension |
| Module: | mod_cache |
Ordinarily, requests with query string parameters are cached separately
for each unique query string. This is according to RFC 2616/13.9 done only
if an expiration time is specified. The
CacheIgnoreQueryString directive tells the cache to
cache requests even if no expiration time is specified, and to reply with
a cached reply even if the query string differs. From a caching point of
view the request is treated as if having no query string when this
directive is enabled.
CacheIgnoreQueryString On
| Description: | Ignore defined session identifiers encoded in the URL when caching |
|---|---|
| Syntax: | CacheIgnoreURLSessionIdentifiers identifier [identifier] ... |
| Default: | CacheIgnoreURLSessionIdentifiers None |
| Context: | server config, virtual host |
| Status: | Extension |
| Module: | mod_cache |
Sometimes applications encode the session identifier into the URL like in the following Examples:
/someapplication/image.gif;jsessionid=123456789/someapplication/image.gif?PHPSESSIONID=12345678This causes cachable resources to be stored separately for each session, which
is often not desired. CacheIgnoreURLSessionIdentifiers lets
define a list of identifiers that are removed from the key that is used to identify
an entity in the cache, such that cachable resources are not stored separately for
each session.
CacheIgnoreURLSessionIdentifiers None clears the list of ignored
identifiers. Otherwise, each identifier is added to the list.
CacheIgnoreURLSessionIdentifiers jsessionid
CacheIgnoreURLSessionIdentifiers None
| Description: | The factor used to compute an expiry date based on the LastModified date. |
|---|---|
| Syntax: | CacheLastModifiedFactor float |
| Default: | CacheLastModifiedFactor 0.1 |
| Context: | server config, virtual host |
| Status: | Extension |
| Module: | mod_cache |
In the event that a document does not provide an expiry date but does
provide a last-modified date, an expiry date can be calculated based on
the time since the document was last modified. The
CacheLastModifiedFactor directive specifies a
factor to be used in the generation of this expiry date
according to the following formula:
expiry-period = time-since-last-modified-date * factor
expiry-date = current-date + expiry-period
For example, if the document was last modified 10 hours ago, and
factor is 0.1 then the expiry-period will be set to
10*0.1 = 1 hour. If the current time was 3:00pm then the computed
expiry-date would be 3:00pm + 1hour = 4:00pm.
If the expiry-period would be longer than that set by
CacheMaxExpire, then the latter takes
precedence.
CacheLastModifiedFactor 0.5
| Description: | Enable the thundering herd lock. |
|---|---|
| Syntax: | CacheLock on|off |
| Default: | CacheLock off |
| Context: | server config, virtual host |
| Status: | Extension |
| Module: | mod_cache |
| Compatibility: | Available in Apache 2.2.15 and later |
The CacheLock directive enables the thundering herd lock
for the given URL space.
In a minimal configuration the following directive is all that is needed to enable the thundering herd lock in the default system temp directory.
# Enable cache lock
CacheLock on
| Description: | Set the maximum possible age of a cache lock. |
|---|---|
| Syntax: | CacheLockMaxAge integer |
| Default: | CacheLockMaxAge 5 |
| Context: | server config, virtual host |
| Status: | Extension |
| Module: | mod_cache |
The CacheLockMaxAge directive specifies the maximum
age of any cache lock.
A lock older than this value in seconds will be ignored, and the next incoming request will be given the opportunity to re-establish the lock. This mechanism prevents a slow client taking an excessively long time to refresh an entity.
| Description: | Set the lock path directory. |
|---|---|
| Syntax: | CacheLockPath directory |
| Default: | CacheLockPath /tmp/mod_cache-lock |
| Context: | server config, virtual host |
| Status: | Extension |
| Module: | mod_cache |
The CacheLockPath directive allows you to specify the
directory in which the locks are created. By default, the system's temporary
folder is used. Locks consist of empty files that only exist for stale URLs
in flight, so is significantly less resource intensive than the traditional
disk cache.
| Description: | The maximum time in seconds to cache a document |
|---|---|
| Syntax: | CacheMaxExpire seconds |
| Default: | CacheMaxExpire 86400 (one day) |
| Context: | server config, virtual host |
| Status: | Extension |
| Module: | mod_cache |
The CacheMaxExpire directive specifies the maximum number of
seconds for which cachable HTTP documents will be retained without checking the origin
server. Thus, documents will be out of date at most this number of seconds. This maximum
value is enforced even if an expiry date was supplied with the document.
CacheMaxExpire 604800
| Description: | The minimum time in seconds to cache a document |
|---|---|
| Syntax: | CacheMinExpire seconds |
| Default: | CacheMinExpire 0 |
| Context: | server config, virtual host |
| Status: | Extension |
| Module: | mod_cache |
The CacheMinExpire directive specifies the minimum number of
seconds for which cachable HTTP documents will be retained without checking the origin
server. This is only used if no valid expire time was supplied with the document.
CacheMinExpire 3600
| Description: | Run the cache from the quick handler. |
|---|---|
| Syntax: | CacheQuickHandler on|off |
| Default: | CacheQuickHandler on |
| Context: | server config, virtual host |
| Status: | Extension |
| Module: | mod_cache |
The CacheQuickHandler directive
controls the phase in which the cache is handled.
In the default enabled configuration, the cache operates within the quick handler phase. This phase short circuits the majority of server processing, and represents the most performant mode of operation for a typical server. The cache bolts onto the front of the server, and the majority of server processing is avoided.
When disabled, the cache operates as a normal handler, and is subject to the full set of phases when handling a server request. While this mode is slower than the default, it allows the cache to be used in cases where full processing is required, such as when content is subject to authorisation.
# Run cache as a normal handler
CacheQuickHandler off
It is also possible, when the quick handler is disabled, for the administrator to choose the precise location within the filter chain where caching is to be performed, by adding the CACHE filter to the chain.
# Cache content before mod_include and mod_deflate
CacheQuickHandler off
AddOutputFilterByType CACHE;INCLUDES;DEFLATE text/html
If the CACHE filter is specified more than once, the last instance will apply.
| Description: | Attempt to cache requests or responses that have been marked as no-store. |
|---|---|
| Syntax: | CacheStoreNoStore On|Off |
| Default: | CacheStoreNoStore Off |
| Context: | server config, virtual host |
| Status: | Extension |
| Module: | mod_cache |
Ordinarily, requests or responses with Cache-Control: no-store header
values will not be stored in the cache. The
CacheStoreNoCache directive allows this
behavior to be overridden. CacheStoreNoCache On
tells the server to attempt to cache the resource even if it contains
no-store header values. Resources requiring authorization will
never be cached.
CacheStoreNoStore On
| Description: | Attempt to cache responses that the server has marked as private |
|---|---|
| Syntax: | CacheStorePrivate On|Off |
| Default: | CacheStorePrivate Off |
| Context: | server config, virtual host |
| Status: | Extension |
| Module: | mod_cache |
Ordinarily, responses with Cache-Control: private header values will not
be stored in the cache. The CacheStorePrivate
directive allows this behavior to be overridden.
CacheStorePrivate On
tells the server to attempt to cache the resource even if it contains
private header values. Resources requiring authorization will
never be cached.
CacheStorePrivate On